kmx git

Commit	Date	Message
113801b7	2018-06-05T12:46:13	Added SDL_IsChromebook() to determine if we're running on a Chromebook.
2dedbc72	2018-06-05T12:46:11	Add Android support for relative mouse mode to SDL.
9d6ac3de	2018-06-05T12:46:09	Fix creating a minimized window in SDL to not cause focus to be stolen (because ShowWindow( hwnd, SW_MINIMIZE ) would be called after creation, thus changing focus to the prior window based on some per-app list in windows, rather than the window being created with WS_MINIMIZED to start with). This means we have to consider SDL_WINDOW_MINIMIZED a window creation flag, but on non-windows platforms we just remove it and let the normal FinishWindowCreation re-apply and do the minimize as I have no idea what is right on them or if anything should change. CR: Phil
1d25135b	2018-06-01T19:43:53	Fixed bug 4184 - jack audio driver fails in presence of midi ports Martin ?irokov Launching an SDL application with SDL_AUDIODRIVER=jack, and then calling SDL_OpenAudioDevice() with whatever parameters fails with an error like this one: SDL_OpenAudioDevice: Couldn't connect JACK ports: SDL:sdl_jack_output_0 => system:midi_playback_1 This happens because JACK_OpenDevice in src/audio/jack/SDL_jackaudio.c blindly tries to connect to all input ports without checking whether they are for audio or midi. The fix is to check port types and ignore all non audio ports. Also I removed devports field from struct SDL_PrivateAudioData, because it's never really used and removing unused ports from it would be PITA.
ff6aebc4	2018-05-29T08:03:44	Added a new GUID for DS3 controller connected over bluetooth, for both Sony and Shanwan (thanks William!)
3d387098	2018-05-27T20:30:03	metal: contrary to documentation, we need to set the drawableSize explicitly. Fixes Bugzilla #4149.
8325df25	2018-05-24T07:30:24	Fixed bug 4169 - Crash due to audio session observer race condition Jona The following explains why this bug was happening: This crash was caused because the audio session was being set as active [session setActive:YES error:&err] when the audio device was actually being CLOSED. Certain cases the audio session being set to active would fail and the method would return right away. Because of the way the error was handled we never removed the SDLInterruptionListener thus leaking it. Later when an interruption was received the THIS_ object would contain a pointer to an already released device causing the crash. The fix: When only one device remained open and it was being closed we needed to set the audio session as NOT active and completely ignore the returned error to successfully release the SDLInterruptionListener. I think the user assumed that the open_playback_devices and open_capture_devices would equal 0 when all of them where closed but the truth is that at the end of the closing process that the open devices count is decremented.
b3173d9d	2018-05-23T17:15:37	Added support for the NVIDIA SHIELD handheld gaming device
361043a5	2018-05-23T17:15:33	Actually left trigger is motion axis 17 and right trigger is motion axis 18, which will map in that order to SDL axes.
4d9a3469	2018-05-23T16:00:21	Added additional supported Android controllers
c07656db	2018-05-23T16:00:19	Fixed default mapping for Android controller triggers (they were reversed)
101544d6	2018-05-21T12:05:17	audio: Needed to fix two more instances for Visual Studio.
0ad4b0b6	2018-05-21T12:00:21	thread: fixed compiler warnings on non-Linux systems that use pthread. (static function rtkit_setpriority was unused, moved it in with rest of __LINUX__ section.)
49881861	2018-05-21T11:54:09	audio: Patched to compile on Visual Studio. (It gets upset at the -2147483648, thinking this should be an unsigned value because 2147483648 is too large for an int32, so the negative sign upsets the compiler.)
4df859c5	2018-05-21T11:35:42	cpuinfo: Added SDL_HasAVX512F(). This checks for the "foundation" AVX-512 instructions (that all AVX-512 compatible CPUs support).
8543ad7d	2018-05-21T11:34:57	cpuinfo: Added some internal SIMD-aligned allocation functions. Fixes Bugzilla #4150 (sort of).
999af809	2018-05-18T13:09:30	Merged latest changes from Steam Link app
e2619f1d	2018-05-17T12:50:46	dynapi: don't let system loader resolve the initializer to the wrong version. Fixes problems launching Firewatch on Linux (which statically links SDL but also dynamically loads a system-wide copy from a plugin shared library) with a newer SDL build.
b7e88aaa	2018-05-16T02:03:06	audio: Added ARM NEON versions of audio converters. These are _much_ faster than the scalar equivalents on the Raspberry Pi that I tested on. Often 3x to 4x as fast!
cb0e614f	2018-05-15T02:29:35	audio: SSE2 float-to-int converters should clamp input. The scalar versions already do this.
a07e5815	2018-05-15T01:40:05	audio: Fix range on float-to-int data clamping. I can't tell if there was a good reason for this or it was just me getting numbers wrong due to exhaustion.
7832cb65	2018-05-15T01:35:53	audio: float to int converters should clamp inclusively. If we have to test if a sample is > 1.0f anyhow, we might as well use this to avoid the unnecessary multiplication when it's == 1.0f, too. (etc).
e2ec1eb1	2018-05-15T01:04:11	audio: converting int32 to/from float shouldn't use doubles. The concern is that a massive int sample, like 0x7FFFFFFF, won't fit in a float32, which doesn't have enough bits to hold a whole number this large, just to divide it to get a value between 0 and 1. Previously we would convert to double, to get more bits, do the division, and cast back to a float, but this is expensive. Casting to double is more accurate, but it's 2x to 3x slower. Shifting out the least significant byte of an int32, so it'll definitely fit in a float, and dividing by 0x7FFFFF is still accurate to about 5 decimal places, and the difference doesn't appear to be perceptable.
4718791f	2018-05-14T00:03:39	cpuinfo: Make CPU flags easier to read and add to.
652d59fb	2018-05-10T09:02:39	make sure SDL_vsnprintf() nul terminates if it is using _vsnprintf The change makes sure that SDL_vsnprintf() nul terminates if it is using _vsnprintf() for the job. I made this patch for Watcom, whose _vsnprintf() doesn't guarantee nul termination. The preprocessor check can be extended to windows in general too, if required. Closes bug #3769.
fe032ff4	2018-05-10T08:25:23	do the direct3d tap dance for overscan hint only if SDL_VIDEO_RENDER_D3D == 1
a4d0571e	2018-05-07T20:10:12	Reverted change for bug 4152 - restrict the win10 mouse bug workaround to win10 v1709 only Daniel Gibson Sorry, but it seems like Microsoft didn't fix the issue properly. I just updated my Win10 machine, it now is Version 1803, Build 17134.1 I tested with SDL2 2.0.7 (my workaround was released with 2.0.8) and still got lots of events that directly undid the prior "real" events - just like before. (See simple testcase in attachement) By default it sets SDL_HINT_MOUSE_RELATIVE_MODE_WARP - which triggered (and on my machine still triggers) the buggy behavior. You can start it with -raw, then it'll not set that hint and the events will be as expected. The easiest way to see the difference is looking at the window title, which shows accumulated X and Y values: If you just move your mouse to the right, in -raw mode the number just increases. In non-raw mode (using mouse warping) it stays around 0. I also had a WinAPI-only testcase: https://gist.github.com/DanielGibson/b5b033c67b9137f0280af9fc53352c68 It just calls SetCursorPos(320,240); on each WM_MOUSEMOVE event, and it also logs all those events to a mouseevents.log textfile. This log indeed looks a bit different since the latest Win10 update: It seems like all those events with x=320 y=240 do arrive - but only after I stopped moving the mouse - even though the cursor seems to be moved back every frame (or so). So moving the mouse to the right gives X coordinates like 330, 325, 333, 340, 330, ... and then when stopping movement I get lots of events with X coordinate 320
eb14b635	2018-05-07T19:52:25	Fixed bug 4134 - Render targets lose scale quality after minimizing a fullscreen window Olli-Samuli Lehmus If one creates a window with the SDL_WINDOW_FULLSCREEN_DESKTOP flag, and creates a render target with SDL_SetHint(SDL_HINT_RENDER_SCALE_QUALITY, "linear"), and afterwards sets SDL_SetHint(SDL_HINT_RENDER_SCALE_QUALITY, "nearest"), after minimizing the window, the scale quality hint is lost on the render target. Textures however do keep their interpolation modes.
606c5a58	2018-05-05T10:27:53	Fixed bug 4152 - Windows 10 v1803 update seems to have fixed the jumping mouse bug (see bug #3931.)
386790ef	2018-04-23T22:29:14	Improved error messages when Vulkan isn't configured (thanks Daniel Gibson!)
8f780e76	2018-04-23T22:17:56	Fixed build
f521b22e	2018-04-23T22:07:56	Added SDL_THREAD_PRIORITY_TIME_CRITICAL
a1b8fa60	2018-04-23T21:50:03	TryLockMutex: Fix error handling for TryLockMutex Christian Herzig pthread_mutex_trylock() and by the way, pthread_mutex_lock() do not set errno. Pthread-methods directly return error code as int. See related man-pages for details.
a9ae1b50	2018-04-23T20:24:12	Handle NULL return from SDL_DBus_GetContext()
b5d231ee	2018-04-23T19:20:12	Handle NULL return from SDL_DBus_GetContext()
43231256	2018-04-23T19:18:52	Added SDL_LinuxSetThreadPriority() to directly set the priority of a Linux thread (tid) This function tries using RealtimeKit connecting over DBUS as needed.
816a6e68	2018-04-23T17:10:36	Added support for adjusting thread priorities using Linux RealtimeKit Michael Sartain This is a quick pass at adding Linux RealtimeKit thread priority support to SDL. It allows me to bump the thread priority to high without root privileges or setting any caps, etc. rtkit readme here: http://git.0pointer.net/rtkit.git/tree/README
dc8b55e5	2018-04-16T02:11:09	coreaudio: Use the standard SDL audio thread instead of spinning a new one. Fixes corner cases, like the audio callback not firing if the device is disconnected, etc.
2df59062	2018-04-15T17:42:09	wayland: zxdg_shell_v6 needs a configure event before using a surface at all. Fixes Bugzilla #4109. Fixes Bugzilla #4119.
b7228bc5	2018-04-11T18:28:03	Added support for the GameSir G3w
6a0ef0cd	2018-04-09T10:37:31	SDL: On Windows, have SDL_ShowWindow() not activate the window if the window has the WS_EX_NOACTIVATE window flag.
4d78a995	2018-03-26T12:38:29	Fixed bug where an SDL window that was activated while hidden could never be shown. Test code: { SDL_Window *win = SDL_CreateWindow( "Dummy", SDL_WINDOWPOS_CENTERED, SDL_WINDOWPOS_CENTERED, 128, 128, SDL_WINDOW_HIDDEN ); SDL_SysWMinfo info; SDL_VERSION( &info.version ); SDL_GetWindowWMInfo( win, &info ); SetActiveWindow( info.info.win.window ); { DWORD then = SDL_GetTicks(); while ( ( SDL_GetTicks() - then ) < 3000 ) { SDL_Event evt; SDL_PollEvent( &evt ); } SDL_ShowWindow( win ); then = SDL_GetTicks(); while ( ( SDL_GetTicks() - then ) < 3000 ) { SDL_Event evt; SDL_PollEvent( &evt ); } } SDL_DestroyWindow( win ); }
e14278ef	2018-03-24T10:26:40	Fixed bug 3804 - Message box on Windows truncates button ID Simon Hug I just wanted to fix a simple compiler warning in SDL_ShowMessageBox on Windows (which Sam fixed recently) and ended up finding some issues. Attached patch fixes these issues: - Because Windows only reports the lower 16 bits of the control identifier that was pushed, the button IDs used by SDL (C type int, most likely 32 bits) can get cut off. - The documentation states (somewhat ambiguously) that the button ID will be -1 if the dialog was closed, but the current code sets 0. For SDL 2.1, I think this should be a return code of SDL_ShowMessageBox itself. That will free up the button ID and it seems a more appropriate place for signaling this event. - Ampersands in controls will create mnemonics on Windows (underlined letters that, if combined with the Alt key, will push the button). I was thinking of adding a hint or flag to let the users enable it, but that might have unexpected results. - When the size of the text gets calculated, it doesn't use the same parameters as the static control. This can cut off text or wrap it weirdly. - On Windows, the Tab key is used to switch between control groups and sometimes between buttons in dialogs. This didn't seem to work correctly. Attached patch also adds: - Icons. Just the system ones that can be loaded with the ordinals IDI_ERROR, IDI_WARNING and IDI_INFORMATION. - A button limit of 2^16 - 101. - Some more specific error messages, but they never reach the user because how SDL_ShowMessageBox handles them if an implementation returns with an error.
b41b9d34	2018-03-19T14:52:53	Fixed return value
8e062f69	2018-03-19T14:42:51	Generalized the handling of instantaneous guide button presses so there's a minimum of 100 ms between guide button press and release. This happens with at least the following controllers: All Apple MFI controllers, ASUS Gamepad, XiaoMi Bluetooth Controller
d529b001	2018-03-19T13:16:11	Added mapping for the ASUS Gamepad removing the guide button, which doesn't generate events even though it's reported in the Android APIs.
f536fbea	2018-03-16T11:08:53	Reimplemented Android cursor API support using reflection so it builds with older SDKs
e20d4173	2018-03-15T18:22:48	Added Android custom cursor implementation This is commented out in SDLActivity.java, with the note #CURSORIMPLEENTATION because it requires API 24, which is higher than the minimum required SDK
d401a77e	2018-03-10T21:22:42	Fixed bug 4102 - define _WIN32_WINNT_WIN7 if not already defined Ozkan Sezer The following patch defines _WIN32_WINNT_WIN7 if it is not already defined in core/windows/SDL_windows.c, similar to what is already there for _WIN32_WINNT_VISTA.
cc7b2fc5	2018-03-10T21:13:50	Temporary fix for bug 3432 - macOS 10.12: small scrolls (1 wheel notch) don't generate events Eric Wasylishen This bug was reintroduced by https://hg.libsdl.org/SDL/rev/fcf24b38a28a The steps to reproduce are the same: run the "testrelative" SDL demo with "--info all", connect a USB mouse with a scroll wheel, and roll the scroll wheel one "notch". You'll get log output like: testdraw2[1644:67222] INFO: SDL EVENT: Mouse: wheel scrolled 0 in x and 0 in y (reversed: 1) in window 1 As far as I can tell macOS doesn't have an API for getting the number of "wheel notches"; I get a deltaY of 0.100006 for one "notch", and it's heavily accelerated (if you roll the wheel quickly you'll get large deltas). So NSEvent's deltaY is only meant to be used for scrolling a scroll view, with the given distance in points, not something like selecting an item in a game. Here's a temporary patch that at restores the foor/ceil in Cocoa_HandleMouseWheel. Not ideal, but at least it restores the ability to scroll one notch of a mousewheel.
129431b4	2018-03-08T16:32:22	Delay delivery of the pause button release on MFI controllers so it doesn't happen in the same frame as the button press
92847022	2018-03-07T18:10:01	Added a mapping for the latest firmware for the Xbox One S controller on Android
a2c1d83c	2018-03-07T18:09:58	Include a USB VID/PID for Apple MFI controllers This is just placeholder VID/PID, but allows code that works with VID/PID to identify the MFI controllers easily.
a8ac5885	2018-03-07T13:30:40	Added SDL_GameControllerMappingForDeviceIndex() to get the mapping for a controller before it's opened
9e651b69	2018-03-06T14:51:50	Try to dynamically create a default Android game controller mapping based on the buttons and axes on the controller. Include the controller USB VID/PID in the GUID where possible, as we do on other platforms.
2419d267	2018-03-02T22:53:25	Progress fixing bug 4100 - errors and warnings after changeset 11917 Ozkan Sezer 2018-03-02 20:02:37 UTC http://hg.libsdl.org/SDL/rev/d702b0c54e52 resulted in an error and two warnings when compiled with mingw. 1. Error from SDL_windowstaskdialog.h: In file included from src/video/windows/SDL_windowsmessagebox.c:29:0: src/video/windows/SDL_windowstaskdialog.h:23:54: error: expected ')' before 'HWND' This is fixed by removing unnecessary annotations: 2. Warning from SDL_assert.c: src/SDL_assert.c: In function 'SDL_ExitProcess': src/SDL_assert.c:138:1: warning: 'noreturn' function does return Indeed ExitProcess() is prototyped with DECLSPEC_NORETURN, but TerminateProcess() is not. This can be rectified by adding an exit() call in there. Do NOTE, however, that requires building with a libc: 3. Warning from SDL_windowsmessagebox.c: src/video/windows/SDL_windowsmessagebox.c: In function 'WIN_ShowMessageBox': src/video/windows/SDL_windowsmessagebox.c:513:9: warning: 'nCancelButton' may be used uninitialized in this function My lazy solution was manually initializing nCancelButton to 0.
ac2d1f67	2018-03-02T12:08:18	Fixed setting the layer drawable size Without this change the drawable had a size of 0 and the metal renderer asserted because the projection matrix wasn't set.
cef1c1c2	2018-03-02T14:10:25	windows: Restore patches for Task Dialogs and TerminateProcess(). 2.0.8 has shipped, these can live in revision control now!
003c0dce	2018-03-02T10:56:21	Use the real controller name for game controllers on iOS and Apple TV
3537c3e7	2018-02-28T10:39:41	Back out Task Dialog and TerminateProcess patches for 2.0.8. These can return to revision control once we ship.
6a1cfcce	2018-02-28T02:14:15	windows: dos2unix'd messagebox code, and (hopefully) fixed on MingW.
a749035f	2018-02-28T01:54:22	windows: Message boxes use Task Dialogs if possible (thanks, Jack!). This lets the message box have an icon. Unless the app has opted-in to using the v6 common controls, though, this will fall back to the usual SDL message boxes.
8536130a	2018-02-28T01:23:49	assert: Use TerminateProcess() on Windows, vs ExitProcess (thanks, Jack!). "What I have done is use TerminateProcess rather than ExitProcess. ExitProcess will cause Microsoft's leak detection to continue, TerminateProcess won't. It is also technically wrong to use ExitProcess in the case of aborting the application. Jack Powell Twitter @jack9267"
be6ca785	2018-02-25T23:02:09	Support official Vulkan SDK for macOS. This tries to load vulkan.framework or libvulkan.1.dylib before MoltenVK.framework or libMoltenVK.dylib. In the previous version, layers would not work for applications run-time loading the default library.
f9f45d0b	2018-02-25T19:51:34	Fixed bug 4097 - Segmentation fault by SDL_CreateThreadWithStackSize Dongsun Kim Normal case 1. [thread 1] SDL_CreateThreadWithStackSize calls SDL_SYS_CreateThread. 2. [thread 1] If successful, it calls SDL_SemWait. 3. [thread 2] SDL_RunThread calls SDL_SYS_SetupThread, SDL_ThreadID, SDL_SemPost. 4. [thread 1] SDL_CreateThreadWithStackSize calls SDL_DestroySemaphore, SDL_free. Crash case (Segmentation fault) 1. [thread 1] SDL_CreateThreadWithStackSize calls SDL_SYS_CreateThread. 2. [thread 1] If successful, it calls SDL_SemWait. --> Error return due to SIGNAL(SYSTEM or Real Time) at sem_wait(pthread). 3. [thread 1] SDL_CreateThreadWithStackSize calls SDL_DestroySemaphore, SDL_free. 4. [thread 2] SDL_RunThread calls SDL_SYS_SetupThread, SDL_ThreadID, SDL_SemPost. --> Segmentation fault at strlen or sem_post.
3ea093cc	2018-02-25T10:15:00	SDL_test_fuzzer.c: fix strict aliasing warnings by using a union.
849d042f	2018-02-24T08:58:22	Fixed bug 4091 - Undefined references to Android audio functions when SDL_AUDIO_DISABLED is on Manuel Sabogal If SDL is compiled with the Audio subsystem disabled there are some undefined references to the functions ANDROIDAUDIO_ResumeDevices and ANDROIDAUDIO_PauseDevices in the file src/video/android/SDL_androidevents.c.
99a0c0f0	2018-02-24T08:23:44	Fixed MinGW-w64 build
0626486e	2018-02-23T19:12:04	Backout the vulkan change in d449dea10fc8 breaks Mir builds
e17c3219	2018-02-23T11:24:26	mir: Disable Mir by default as Mir supports Wayland clients Also remove enabling VK support for Mir
8891f591	2018-02-21T22:53:52	Backed out changeset 6c8521d53507 Apparently this still triggers a compiler warning, have to dig further.
fd8f12d2	2018-02-21T22:35:17	android: apparently they fixed this header at some point.
ac309df7	2018-02-21T22:27:09	vulkan: Possibly fix a compiler warning (-Wstrict-prototypes).
ed64d54d	2018-02-21T21:36:10	windows: added WIN_IsWindows7OrGreater().
7e1fa0ce	2018-02-21T21:34:35	wasapi: fixed typo in an assert message.
c7e43665	2018-02-21T21:34:06	wasapi: let Windows do the resampling for us if possible.
69958441	2018-02-21T09:58:21	Fix high-dpi support on macOS and simplify it and iOS variant. The detault drawableSize for a CAMetalLayer is its bounds x its scale. So it is sufficient to set the layer's scale to the desired value.
6e3d0a13	2018-02-21T12:42:30	Use new XInput mapping for Win10+ (Bugzilla #3960)
a0687a9c	2018-02-21T09:40:47	Fixed bug 4034 - Don't include _DllMainCRTStartup() if SDL_STATIC_LIB is defined.
58f9be12	2018-02-18T09:09:56	Actually, this is needed for building with Visual Studio with both /MT and /MD. With the previous change, I get: 1> Creating library C:\projects\SDL\VisualC\Win32\Debug\SDL2.lib and object C:\projects\SDL\VisualC\Win32\Debug\SDL2.exp 1>LINK : error LNK2001: unresolved external symbol __DllMainCRTStartup@12
3c9d3336	2018-02-18T08:57:01	Fixed bug 4034 - Do we really need _DllMainCRTStartup() in every Windows build? Andreas Falkenhahn In src/SDL.c there is this code: _DllMainCRTStartup(HANDLE hModule, ... The comment says that this is needed on Watcom C for some reason but why is it included then when building with Visual C as well? Shouldn't it be only included when compiling on Watcom C then? I'm asking because this code caused me a lot of headaches because I'm building a DLL that contains SDL and I link using /MT and the _DllMainCRTStartup() symbol obviously led to lots of trouble but it wasn't clear to me where the problem was because all I got from the linker was: LNK2019: unresolved external symbol _main referenced in function ___tmainCRTStartup So I had to got through each and every object to see what the culprit was. See here for the full story: https://stackoverflow.com/questions/25067151/lnk2019-unresolved-external-symbol-main-referenced-in-function-tmaincrtstar/48177067#48177067 So if it isn't necessary on Visual C, please just leave that symbol out on Visual C so that it no longer leads to any trouble. Thanks.
75a58303	2018-02-17T23:57:57	pthread: fix error code checks (thanks, Andreas!). Most pthread functions return 0 on success and non-zero on error, but those errors might be positive or negative, so checking for return values in the Unix style, where errors are less than zero, is a bug. Fixes Bugzilla #4039.
2ea4419a	2018-02-17T20:18:48	yuv: patched to compile.
7c0c2c22	2018-02-17T20:10:13	yuv: fixed variable declaration shadowing warnings. Fixes Bugzilla #4062.
97494f53	2018-02-17T18:30:21	pulseaudio: Just read/dump captured data in FlushCapture. Apparently pa_stream_flush() doesn't work as expected: https://lists.freedesktop.org/archives/pulseaudio-discuss/2012-April/013328.html Fixes Bugzilla #4087.
6867f618	2018-02-16T14:56:28	video: put a spinlock around a global linked list. This should only contend if you're allocating or freeing surfaces from multiple threads at once, and then just for a short time. Fixes Bugzilla #4084.
8ddebfa0	2018-02-16T10:23:10	Fixed bug 4085 - X11: Allow configuring _NET_WM_BYPASS_COMPOSITOR through SDL hints Callum McGing This patch allows the user to disable the behaviour that blocks the compositor through a new hint: SDL_VIDEO_X11_NET_WM_BYPASS_COMPOSITOR. This allows tools or other windowed applications to behave properly under KWin.
5abd7d16	2018-02-13T22:58:20	Don't attempt WM_NCCALCSIZE adjustment when in fullscreen window transition
f6366c09	2018-02-13T08:15:39	Fixed bug 3920 - IBus not work with SDL 2.0.7 cjacker After updating from 2.0.5 to 2.0.7, Ibus not work anymore(fcitx still works). Compare with 2.0.5, there are two issues in SDL_ibus.c. 1, SetupConnection always return SDL_FALSE in 2.0.7. 2, 'SetCapabilities' method should be called on 'ibus_conn'. Patch attached.
3b4c2fdf	2018-02-13T08:13:29	Fixed bug 3947 - replace strlcpy with memcpy in SDL_strdup()
714085d3	2018-02-13T08:07:52	Fixed bug 3950 - Don't always call dbus_shutdown in SDL_DBus Alexander Larsson dbus_shutdown() is a debug feature which closes all global resources in the dbus library. Calling this should be done by the app, not a library, because if there are multiple users of dbus in the process then SDL could shut it down even though another part is using it. For example, i had an issue with this in mGBA, which uses both Qt and SDL, both using libdbus. I had a session bus, but no system bus (this was in a flatpak sandbox), and when SDL_DBus_Init() failed to init the system bus it called dbus_shudown() and continued on. This caused issues for Qt when running due to its session bus connections having disappeared beneath it.
40b27fd5	2018-02-12T17:00:00	revert the recent typecast assignment changes (see bug #4079) also change the void* typedefs for the two vulkan function pointers added in vulkan_internal.h into generic function pointer typedefs.
ba0ecc67	2018-02-12T10:47:00	fix building SDL_audiotypecvt.c with gcc < 4.0
8a1ae708	2018-02-12T10:00:00	kill C99'ism in SDL_waylandvulkan.c
6e01fbb7	2018-02-11T18:23:37	On Android show the system UI when an SDL window is windowed, hide the system UI when it's fullscreen, like we do on iOS. We're increasing the Android SDK minimum version to API 19, this doesn't increase the minimum target API, which is API 14.
873141ac	2018-02-11T15:29:36	ISO C correct fix for casting void* to function pointer
882215e1	2018-02-11T18:16:01	vulkan: Fix assignment of vkGetInstanceProcAddr on Windows. "(void)pfn = LoadAddress()" would cast the NULL pointer in pfn to a void*, and then dereference it, which wasn't what we wanted. Replaced with a clearer cast operation.
1143857d	2018-02-10T12:43:11	Fixed bug 4073 - Unquoted Unicode argument parsing broken on Windows due to incorrect usage of SDL_isspace()
d5f293a7	2018-02-09T16:31:57	Fixed compile warning
7c360027	2018-02-09T16:01:11	Fixed compiler warning on Android

113801b7

2018-06-05T12:46:13

Added SDL_IsChromebook() to determine if we're running on a Chromebook.

2dedbc72

2018-06-05T12:46:11

Add Android support for relative mouse mode to SDL.

9d6ac3de

2018-06-05T12:46:09

Fix creating a minimized window in SDL to not cause focus to be stolen (because ShowWindow( hwnd, SW_MINIMIZE ) would be called after creation, thus changing focus to the prior window based on some per-app list in windows, rather than the window being created with WS_MINIMIZED to start with). This means we have to consider SDL_WINDOW_MINIMIZED a window creation flag, but on non-windows platforms we just remove it and let the normal FinishWindowCreation re-apply and do the minimize as I have no idea what is right on them or if anything should change. CR: Phil

1d25135b

2018-06-01T19:43:53

Fixed bug 4184 - jack audio driver fails in presence of midi ports Martin ?irokov Launching an SDL application with SDL_AUDIODRIVER=jack, and then calling SDL_OpenAudioDevice() with whatever parameters fails with an error like this one: SDL_OpenAudioDevice: Couldn't connect JACK ports: SDL:sdl_jack_output_0 => system:midi_playback_1 This happens because JACK_OpenDevice in src/audio/jack/SDL_jackaudio.c blindly tries to connect to all input ports without checking whether they are for audio or midi. The fix is to check port types and ignore all non audio ports. Also I removed devports field from struct SDL_PrivateAudioData, because it's never really used and removing unused ports from it would be PITA.

ff6aebc4

2018-05-29T08:03:44

Added a new GUID for DS3 controller connected over bluetooth, for both Sony and Shanwan (thanks William!)

3d387098

2018-05-27T20:30:03

metal: contrary to documentation, we need to set the drawableSize explicitly. Fixes Bugzilla #4149.

8325df25

2018-05-24T07:30:24

Fixed bug 4169 - Crash due to audio session observer race condition Jona The following explains why this bug was happening: This crash was caused because the audio session was being set as active [session setActive:YES error:&err] when the audio device was actually being CLOSED. Certain cases the audio session being set to active would fail and the method would return right away. Because of the way the error was handled we never removed the SDLInterruptionListener thus leaking it. Later when an interruption was received the THIS_ object would contain a pointer to an already released device causing the crash. The fix: When only one device remained open and it was being closed we needed to set the audio session as NOT active and completely ignore the returned error to successfully release the SDLInterruptionListener. I think the user assumed that the open_playback_devices and open_capture_devices would equal 0 when all of them where closed but the truth is that at the end of the closing process that the open devices count is decremented.

b3173d9d

2018-05-23T17:15:37

Added support for the NVIDIA SHIELD handheld gaming device

361043a5

2018-05-23T17:15:33

Actually left trigger is motion axis 17 and right trigger is motion axis 18, which will map in that order to SDL axes.

4d9a3469

2018-05-23T16:00:21

Added additional supported Android controllers

c07656db

2018-05-23T16:00:19

Fixed default mapping for Android controller triggers (they were reversed)

101544d6

2018-05-21T12:05:17

audio: Needed to fix two more instances for Visual Studio.

0ad4b0b6

2018-05-21T12:00:21

thread: fixed compiler warnings on non-Linux systems that use pthread. (static function rtkit_setpriority was unused, moved it in with rest of __LINUX__ section.)

49881861

2018-05-21T11:54:09

audio: Patched to compile on Visual Studio. (It gets upset at the -2147483648, thinking this should be an unsigned value because 2147483648 is too large for an int32, so the negative sign upsets the compiler.)

4df859c5

2018-05-21T11:35:42

cpuinfo: Added SDL_HasAVX512F(). This checks for the "foundation" AVX-512 instructions (that all AVX-512 compatible CPUs support).

8543ad7d

2018-05-21T11:34:57

cpuinfo: Added some internal SIMD-aligned allocation functions. Fixes Bugzilla #4150 (sort of).

999af809

2018-05-18T13:09:30

Merged latest changes from Steam Link app

e2619f1d

2018-05-17T12:50:46

dynapi: don't let system loader resolve the initializer to the wrong version. Fixes problems launching Firewatch on Linux (which statically links SDL but also dynamically loads a system-wide copy from a plugin shared library) with a newer SDL build.

b7e88aaa

2018-05-16T02:03:06

audio: Added ARM NEON versions of audio converters. These are _much_ faster than the scalar equivalents on the Raspberry Pi that I tested on. Often 3x to 4x as fast!

cb0e614f

2018-05-15T02:29:35

audio: SSE2 float-to-int converters should clamp input. The scalar versions already do this.

a07e5815

2018-05-15T01:40:05

audio: Fix range on float-to-int data clamping. I can't tell if there was a good reason for this or it was just me getting numbers wrong due to exhaustion.

7832cb65

2018-05-15T01:35:53

audio: float to int converters should clamp inclusively. If we have to test if a sample is > 1.0f anyhow, we might as well use this to avoid the unnecessary multiplication when it's == 1.0f, too. (etc).

e2ec1eb1

2018-05-15T01:04:11

audio: converting int32 to/from float shouldn't use doubles. The concern is that a massive int sample, like 0x7FFFFFFF, won't fit in a float32, which doesn't have enough bits to hold a whole number this large, just to divide it to get a value between 0 and 1. Previously we would convert to double, to get more bits, do the division, and cast back to a float, but this is expensive. Casting to double is more accurate, but it's 2x to 3x slower. Shifting out the least significant byte of an int32, so it'll definitely fit in a float, and dividing by 0x7FFFFF is still accurate to about 5 decimal places, and the difference doesn't appear to be perceptable.

4718791f

2018-05-14T00:03:39

cpuinfo: Make CPU flags easier to read and add to.

652d59fb

2018-05-10T09:02:39

make sure SDL_vsnprintf() nul terminates if it is using _vsnprintf The change makes sure that SDL_vsnprintf() nul terminates if it is using _vsnprintf() for the job. I made this patch for Watcom, whose _vsnprintf() doesn't guarantee nul termination. The preprocessor check can be extended to windows in general too, if required. Closes bug #3769.

fe032ff4

2018-05-10T08:25:23

do the direct3d tap dance for overscan hint only if SDL_VIDEO_RENDER_D3D == 1

a4d0571e

2018-05-07T20:10:12

Reverted change for bug 4152 - restrict the win10 mouse bug workaround to win10 v1709 only Daniel Gibson Sorry, but it seems like Microsoft didn't fix the issue properly. I just updated my Win10 machine, it now is Version 1803, Build 17134.1 I tested with SDL2 2.0.7 (my workaround was released with 2.0.8) and still got lots of events that directly undid the prior "real" events - just like before. (See simple testcase in attachement) By default it sets SDL_HINT_MOUSE_RELATIVE_MODE_WARP - which triggered (and on my machine still triggers) the buggy behavior. You can start it with -raw, then it'll not set that hint and the events will be as expected. The easiest way to see the difference is looking at the window title, which shows accumulated X and Y values: If you just move your mouse to the right, in -raw mode the number just increases. In non-raw mode (using mouse warping) it stays around 0. I also had a WinAPI-only testcase: https://gist.github.com/DanielGibson/b5b033c67b9137f0280af9fc53352c68 It just calls SetCursorPos(320,240); on each WM_MOUSEMOVE event, and it also logs all those events to a mouseevents.log textfile. This log indeed looks a bit different since the latest Win10 update: It seems like all those events with x=320 y=240 do arrive - but only after I stopped moving the mouse - even though the cursor seems to be moved back every frame (or so). So moving the mouse to the right gives X coordinates like 330, 325, 333, 340, 330, ... and then when stopping movement I get lots of events with X coordinate 320

eb14b635

2018-05-07T19:52:25

Fixed bug 4134 - Render targets lose scale quality after minimizing a fullscreen window Olli-Samuli Lehmus If one creates a window with the SDL_WINDOW_FULLSCREEN_DESKTOP flag, and creates a render target with SDL_SetHint(SDL_HINT_RENDER_SCALE_QUALITY, "linear"), and afterwards sets SDL_SetHint(SDL_HINT_RENDER_SCALE_QUALITY, "nearest"), after minimizing the window, the scale quality hint is lost on the render target. Textures however do keep their interpolation modes.

606c5a58

2018-05-05T10:27:53

Fixed bug 4152 - Windows 10 v1803 update seems to have fixed the jumping mouse bug (see bug #3931.)

386790ef

2018-04-23T22:29:14

Improved error messages when Vulkan isn't configured (thanks Daniel Gibson!)

8f780e76

2018-04-23T22:17:56

Fixed build

f521b22e

2018-04-23T22:07:56

Added SDL_THREAD_PRIORITY_TIME_CRITICAL

a1b8fa60

2018-04-23T21:50:03

TryLockMutex: Fix error handling for TryLockMutex Christian Herzig pthread_mutex_trylock() and by the way, pthread_mutex_lock() do not set errno. Pthread-methods directly return error code as int. See related man-pages for details.

a9ae1b50

2018-04-23T20:24:12

Handle NULL return from SDL_DBus_GetContext()

b5d231ee

2018-04-23T19:20:12

Handle NULL return from SDL_DBus_GetContext()

43231256

2018-04-23T19:18:52

Added SDL_LinuxSetThreadPriority() to directly set the priority of a Linux thread (tid) This function tries using RealtimeKit connecting over DBUS as needed.

816a6e68

2018-04-23T17:10:36

Added support for adjusting thread priorities using Linux RealtimeKit Michael Sartain This is a quick pass at adding Linux RealtimeKit thread priority support to SDL. It allows me to bump the thread priority to high without root privileges or setting any caps, etc. rtkit readme here: http://git.0pointer.net/rtkit.git/tree/README

dc8b55e5

2018-04-16T02:11:09

coreaudio: Use the standard SDL audio thread instead of spinning a new one. Fixes corner cases, like the audio callback not firing if the device is disconnected, etc.

2df59062

2018-04-15T17:42:09

wayland: zxdg_shell_v6 needs a configure event before using a surface at all. Fixes Bugzilla #4109. Fixes Bugzilla #4119.

b7228bc5

2018-04-11T18:28:03

Added support for the GameSir G3w

6a0ef0cd

2018-04-09T10:37:31

SDL: On Windows, have SDL_ShowWindow() not activate the window if the window has the WS_EX_NOACTIVATE window flag.

4d78a995

2018-03-26T12:38:29

Fixed bug where an SDL window that was activated while hidden could never be shown. Test code: { SDL_Window *win = SDL_CreateWindow( "Dummy", SDL_WINDOWPOS_CENTERED, SDL_WINDOWPOS_CENTERED, 128, 128, SDL_WINDOW_HIDDEN ); SDL_SysWMinfo info; SDL_VERSION( &info.version ); SDL_GetWindowWMInfo( win, &info ); SetActiveWindow( info.info.win.window ); { DWORD then = SDL_GetTicks(); while ( ( SDL_GetTicks() - then ) < 3000 ) { SDL_Event evt; SDL_PollEvent( &evt ); } SDL_ShowWindow( win ); then = SDL_GetTicks(); while ( ( SDL_GetTicks() - then ) < 3000 ) { SDL_Event evt; SDL_PollEvent( &evt ); } } SDL_DestroyWindow( win ); }

e14278ef

2018-03-24T10:26:40

Fixed bug 3804 - Message box on Windows truncates button ID Simon Hug I just wanted to fix a simple compiler warning in SDL_ShowMessageBox on Windows (which Sam fixed recently) and ended up finding some issues. Attached patch fixes these issues: - Because Windows only reports the lower 16 bits of the control identifier that was pushed, the button IDs used by SDL (C type int, most likely 32 bits) can get cut off. - The documentation states (somewhat ambiguously) that the button ID will be -1 if the dialog was closed, but the current code sets 0. For SDL 2.1, I think this should be a return code of SDL_ShowMessageBox itself. That will free up the button ID and it seems a more appropriate place for signaling this event. - Ampersands in controls will create mnemonics on Windows (underlined letters that, if combined with the Alt key, will push the button). I was thinking of adding a hint or flag to let the users enable it, but that might have unexpected results. - When the size of the text gets calculated, it doesn't use the same parameters as the static control. This can cut off text or wrap it weirdly. - On Windows, the Tab key is used to switch between control groups and sometimes between buttons in dialogs. This didn't seem to work correctly. Attached patch also adds: - Icons. Just the system ones that can be loaded with the ordinals IDI_ERROR, IDI_WARNING and IDI_INFORMATION. - A button limit of 2^16 - 101. - Some more specific error messages, but they never reach the user because how SDL_ShowMessageBox handles them if an implementation returns with an error.

b41b9d34

2018-03-19T14:52:53

Fixed return value

8e062f69

2018-03-19T14:42:51

Generalized the handling of instantaneous guide button presses so there's a minimum of 100 ms between guide button press and release. This happens with at least the following controllers: All Apple MFI controllers, ASUS Gamepad, XiaoMi Bluetooth Controller

d529b001

2018-03-19T13:16:11

Added mapping for the ASUS Gamepad removing the guide button, which doesn't generate events even though it's reported in the Android APIs.

f536fbea

2018-03-16T11:08:53

Reimplemented Android cursor API support using reflection so it builds with older SDKs

e20d4173

2018-03-15T18:22:48

Added Android custom cursor implementation This is commented out in SDLActivity.java, with the note #CURSORIMPLEENTATION because it requires API 24, which is higher than the minimum required SDK

d401a77e

2018-03-10T21:22:42

Fixed bug 4102 - define _WIN32_WINNT_WIN7 if not already defined Ozkan Sezer The following patch defines _WIN32_WINNT_WIN7 if it is not already defined in core/windows/SDL_windows.c, similar to what is already there for _WIN32_WINNT_VISTA.

cc7b2fc5

2018-03-10T21:13:50

Temporary fix for bug 3432 - macOS 10.12: small scrolls (1 wheel notch) don't generate events Eric Wasylishen This bug was reintroduced by https://hg.libsdl.org/SDL/rev/fcf24b38a28a The steps to reproduce are the same: run the "testrelative" SDL demo with "--info all", connect a USB mouse with a scroll wheel, and roll the scroll wheel one "notch". You'll get log output like: testdraw2[1644:67222] INFO: SDL EVENT: Mouse: wheel scrolled 0 in x and 0 in y (reversed: 1) in window 1 As far as I can tell macOS doesn't have an API for getting the number of "wheel notches"; I get a deltaY of 0.100006 for one "notch", and it's heavily accelerated (if you roll the wheel quickly you'll get large deltas). So NSEvent's deltaY is only meant to be used for scrolling a scroll view, with the given distance in points, not something like selecting an item in a game. Here's a temporary patch that at restores the foor/ceil in Cocoa_HandleMouseWheel. Not ideal, but at least it restores the ability to scroll one notch of a mousewheel.

129431b4

2018-03-08T16:32:22

Delay delivery of the pause button release on MFI controllers so it doesn't happen in the same frame as the button press

92847022

2018-03-07T18:10:01

Added a mapping for the latest firmware for the Xbox One S controller on Android

a2c1d83c

2018-03-07T18:09:58

Include a USB VID/PID for Apple MFI controllers This is just placeholder VID/PID, but allows code that works with VID/PID to identify the MFI controllers easily.

a8ac5885

2018-03-07T13:30:40

Added SDL_GameControllerMappingForDeviceIndex() to get the mapping for a controller before it's opened

9e651b69

2018-03-06T14:51:50

Try to dynamically create a default Android game controller mapping based on the buttons and axes on the controller. Include the controller USB VID/PID in the GUID where possible, as we do on other platforms.

2419d267

2018-03-02T22:53:25

Progress fixing bug 4100 - errors and warnings after changeset 11917 Ozkan Sezer 2018-03-02 20:02:37 UTC http://hg.libsdl.org/SDL/rev/d702b0c54e52 resulted in an error and two warnings when compiled with mingw. 1. Error from SDL_windowstaskdialog.h: In file included from src/video/windows/SDL_windowsmessagebox.c:29:0: src/video/windows/SDL_windowstaskdialog.h:23:54: error: expected ')' before 'HWND' This is fixed by removing unnecessary annotations: 2. Warning from SDL_assert.c: src/SDL_assert.c: In function 'SDL_ExitProcess': src/SDL_assert.c:138:1: warning: 'noreturn' function does return Indeed ExitProcess() is prototyped with DECLSPEC_NORETURN, but TerminateProcess() is not. This can be rectified by adding an exit() call in there. Do NOTE, however, that requires building with a libc: 3. Warning from SDL_windowsmessagebox.c: src/video/windows/SDL_windowsmessagebox.c: In function 'WIN_ShowMessageBox': src/video/windows/SDL_windowsmessagebox.c:513:9: warning: 'nCancelButton' may be used uninitialized in this function My lazy solution was manually initializing nCancelButton to 0.

ac2d1f67

2018-03-02T12:08:18

Fixed setting the layer drawable size Without this change the drawable had a size of 0 and the metal renderer asserted because the projection matrix wasn't set.

cef1c1c2

2018-03-02T14:10:25

windows: Restore patches for Task Dialogs and TerminateProcess(). 2.0.8 has shipped, these can live in revision control now!

003c0dce

2018-03-02T10:56:21

Use the real controller name for game controllers on iOS and Apple TV

3537c3e7

2018-02-28T10:39:41

Back out Task Dialog and TerminateProcess patches for 2.0.8. These can return to revision control once we ship.

6a1cfcce

2018-02-28T02:14:15

windows: dos2unix'd messagebox code, and (hopefully) fixed on MingW.

a749035f

2018-02-28T01:54:22

windows: Message boxes use Task Dialogs if possible (thanks, Jack!). This lets the message box have an icon. Unless the app has opted-in to using the v6 common controls, though, this will fall back to the usual SDL message boxes.

8536130a

2018-02-28T01:23:49

assert: Use TerminateProcess() on Windows, vs ExitProcess (thanks, Jack!). "What I have done is use TerminateProcess rather than ExitProcess. ExitProcess will cause Microsoft's leak detection to continue, TerminateProcess won't. It is also technically wrong to use ExitProcess in the case of aborting the application. Jack Powell Twitter @jack9267"

be6ca785

2018-02-25T23:02:09

Support official Vulkan SDK for macOS. This tries to load vulkan.framework or libvulkan.1.dylib before MoltenVK.framework or libMoltenVK.dylib. In the previous version, layers would not work for applications run-time loading the default library.

f9f45d0b

2018-02-25T19:51:34

Fixed bug 4097 - Segmentation fault by SDL_CreateThreadWithStackSize Dongsun Kim Normal case 1. [thread 1] SDL_CreateThreadWithStackSize calls SDL_SYS_CreateThread. 2. [thread 1] If successful, it calls SDL_SemWait. 3. [thread 2] SDL_RunThread calls SDL_SYS_SetupThread, SDL_ThreadID, SDL_SemPost. 4. [thread 1] SDL_CreateThreadWithStackSize calls SDL_DestroySemaphore, SDL_free. Crash case (Segmentation fault) 1. [thread 1] SDL_CreateThreadWithStackSize calls SDL_SYS_CreateThread. 2. [thread 1] If successful, it calls SDL_SemWait. --> Error return due to SIGNAL(SYSTEM or Real Time) at sem_wait(pthread). 3. [thread 1] SDL_CreateThreadWithStackSize calls SDL_DestroySemaphore, SDL_free. 4. [thread 2] SDL_RunThread calls SDL_SYS_SetupThread, SDL_ThreadID, SDL_SemPost. --> Segmentation fault at strlen or sem_post.

3ea093cc

2018-02-25T10:15:00

SDL_test_fuzzer.c: fix strict aliasing warnings by using a union.

849d042f

2018-02-24T08:58:22

Fixed bug 4091 - Undefined references to Android audio functions when SDL_AUDIO_DISABLED is on Manuel Sabogal If SDL is compiled with the Audio subsystem disabled there are some undefined references to the functions ANDROIDAUDIO_ResumeDevices and ANDROIDAUDIO_PauseDevices in the file src/video/android/SDL_androidevents.c.

99a0c0f0

2018-02-24T08:23:44

Fixed MinGW-w64 build

0626486e

2018-02-23T19:12:04

Backout the vulkan change in d449dea10fc8 breaks Mir builds

e17c3219

2018-02-23T11:24:26

mir: Disable Mir by default as Mir supports Wayland clients Also remove enabling VK support for Mir

8891f591

2018-02-21T22:53:52

Backed out changeset 6c8521d53507 Apparently this still triggers a compiler warning, have to dig further.

fd8f12d2

2018-02-21T22:35:17

android: apparently they fixed this header at some point.

ac309df7

2018-02-21T22:27:09

vulkan: Possibly fix a compiler warning (-Wstrict-prototypes).

ed64d54d

2018-02-21T21:36:10

windows: added WIN_IsWindows7OrGreater().

7e1fa0ce

2018-02-21T21:34:35

wasapi: fixed typo in an assert message.

c7e43665

2018-02-21T21:34:06

wasapi: let Windows do the resampling for us if possible.

69958441

2018-02-21T09:58:21

Fix high-dpi support on macOS and simplify it and iOS variant. The detault drawableSize for a CAMetalLayer is its bounds x its scale. So it is sufficient to set the *layer's* scale to the desired value.

6e3d0a13

2018-02-21T12:42:30

Use new XInput mapping for Win10+ (Bugzilla #3960)

a0687a9c

2018-02-21T09:40:47

Fixed bug 4034 - Don't include _DllMainCRTStartup() if SDL_STATIC_LIB is defined.

58f9be12

2018-02-18T09:09:56

Actually, this is needed for building with Visual Studio with both /MT and /MD. With the previous change, I get: 1> Creating library C:\projects\SDL\VisualC\Win32\Debug\SDL2.lib and object C:\projects\SDL\VisualC\Win32\Debug\SDL2.exp 1>LINK : error LNK2001: unresolved external symbol __DllMainCRTStartup@12

3c9d3336

2018-02-18T08:57:01

Fixed bug 4034 - Do we really need _DllMainCRTStartup() in every Windows build? Andreas Falkenhahn In src/SDL.c there is this code: _DllMainCRTStartup(HANDLE hModule, ... The comment says that this is needed on Watcom C for some reason but why is it included then when building with Visual C as well? Shouldn't it be only included when compiling on Watcom C then? I'm asking because this code caused me a lot of headaches because I'm building a DLL that contains SDL and I link using /MT and the _DllMainCRTStartup() symbol obviously led to lots of trouble but it wasn't clear to me where the problem was because all I got from the linker was: LNK2019: unresolved external symbol _main referenced in function ___tmainCRTStartup So I had to got through each and every object to see what the culprit was. See here for the full story: https://stackoverflow.com/questions/25067151/lnk2019-unresolved-external-symbol-main-referenced-in-function-tmaincrtstar/48177067#48177067 So if it isn't necessary on Visual C, please just leave that symbol out on Visual C so that it no longer leads to any trouble. Thanks.

75a58303

2018-02-17T23:57:57

pthread: fix error code checks (thanks, Andreas!). Most pthread functions return 0 on success and non-zero on error, but those errors might be positive or negative, so checking for return values in the Unix style, where errors are less than zero, is a bug. Fixes Bugzilla #4039.

2ea4419a

2018-02-17T20:18:48

yuv: patched to compile.

7c0c2c22

2018-02-17T20:10:13

yuv: fixed variable declaration shadowing warnings. Fixes Bugzilla #4062.

97494f53

2018-02-17T18:30:21

pulseaudio: Just read/dump captured data in FlushCapture. Apparently pa_stream_flush() doesn't work as expected: https://lists.freedesktop.org/archives/pulseaudio-discuss/2012-April/013328.html Fixes Bugzilla #4087.

6867f618

2018-02-16T14:56:28

video: put a spinlock around a global linked list. This should only contend if you're allocating or freeing surfaces from multiple threads at once, and then just for a short time. Fixes Bugzilla #4084.

8ddebfa0

2018-02-16T10:23:10

Fixed bug 4085 - X11: Allow configuring _NET_WM_BYPASS_COMPOSITOR through SDL hints Callum McGing This patch allows the user to disable the behaviour that blocks the compositor through a new hint: SDL_VIDEO_X11_NET_WM_BYPASS_COMPOSITOR. This allows tools or other windowed applications to behave properly under KWin.

5abd7d16

2018-02-13T22:58:20

Don't attempt WM_NCCALCSIZE adjustment when in fullscreen window transition

f6366c09

2018-02-13T08:15:39

Fixed bug 3920 - IBus not work with SDL 2.0.7 cjacker After updating from 2.0.5 to 2.0.7, Ibus not work anymore(fcitx still works). Compare with 2.0.5, there are two issues in SDL_ibus.c. 1, SetupConnection always return SDL_FALSE in 2.0.7. 2, 'SetCapabilities' method should be called on 'ibus_conn'. Patch attached.

3b4c2fdf

2018-02-13T08:13:29

Fixed bug 3947 - replace strlcpy with memcpy in SDL_strdup()

714085d3

2018-02-13T08:07:52

Fixed bug 3950 - Don't always call dbus_shutdown in SDL_DBus Alexander Larsson dbus_shutdown() is a debug feature which closes all global resources in the dbus library. Calling this should be done by the app, not a library, because if there are multiple users of dbus in the process then SDL could shut it down even though another part is using it. For example, i had an issue with this in mGBA, which uses both Qt and SDL, both using libdbus. I had a session bus, but no system bus (this was in a flatpak sandbox), and when SDL_DBus_Init() failed to init the system bus it called dbus_shudown() and continued on. This caused issues for Qt when running due to its session bus connections having disappeared beneath it.

40b27fd5

2018-02-12T17:00:00

revert the recent typecast assignment changes (see bug #4079) also change the void* typedefs for the two vulkan function pointers added in vulkan_internal.h into generic function pointer typedefs.

ba0ecc67

2018-02-12T10:47:00

fix building SDL_audiotypecvt.c with gcc < 4.0

8a1ae708

2018-02-12T10:00:00

kill C99'ism in SDL_waylandvulkan.c

6e01fbb7

2018-02-11T18:23:37

On Android show the system UI when an SDL window is windowed, hide the system UI when it's fullscreen, like we do on iOS. We're increasing the Android SDK minimum version to API 19, this doesn't increase the minimum target API, which is API 14.

873141ac

2018-02-11T15:29:36

ISO C correct fix for casting void* to function pointer

882215e1

2018-02-11T18:16:01

vulkan: Fix assignment of vkGetInstanceProcAddr on Windows. "*(void**)pfn = LoadAddress()" would cast the NULL pointer in pfn to a void**, and then dereference it, which wasn't what we wanted. Replaced with a clearer cast operation.

1143857d

2018-02-10T12:43:11

Fixed bug 4073 - Unquoted Unicode argument parsing broken on Windows due to incorrect usage of SDL_isspace()

d5f293a7

2018-02-09T16:31:57

Fixed compile warning

7c360027

2018-02-09T16:01:11

Fixed compiler warning on Android

kc3-lang/SDL/src

src

Log