|
1d40c69a
|
2021-11-05T22:52:03
|
|
Fixed typo
|
|
|
2248a549
|
2021-11-05T22:48:46
|
|
Update the focus in case we changed focus to a child window and then away from the application
In this case we'll get WM_KILLFOCUS when the child window is focused, but we'll retain focus on the top level window, but when we Alt-Tab away, we won't get another WM_KILLFOCUS or WM_NCACTIVATE, we get WM_ACTIVATE instead, so we need to check for focus updates in response to that as well.
|
|
5de72374
|
2021-11-05T21:06:58
|
|
SDL_config_windows.h: detect winsdkver.h using __has_include()
__has_include() was added in VS 2017 15.3, so this works out to essentially
the same _MSC_VER >= 1911 check we had before for MSVC but works for non-MSVC
compilers also.
|
|
c48c81bd
|
2021-11-06T00:00:17
|
|
docs: List the required Fedora packages in README-linux.md
|
|
6407d4b0
|
2021-11-05T17:10:02
|
|
remove unnecessary parentheses from SDL_abs()
|
|
6cbee063
|
2021-11-05T01:17:29
|
|
include: Swap parameter names in atan2 functions
|
|
|
7f308abb
|
2021-11-04T01:02:48
|
|
cmake: Only prevent MSVC codegen using the CRT if SDL_LIBC=OFF
|
|
|
d8b53e82
|
2021-11-03T19:51:18
|
|
direct3d11: fix SDK version requirement for non-CMake build
The D3D11 renderer requires Direct3D 11.1 (d3d11_1.h), not Direct3D 11.0
(d3d11.h). In terms of SDKs, that's the Windows 8 SDK or later.
We should probably rename HAVE_D3D11_H...
|
|
|
802e17aa
|
2021-11-03T20:35:20
|
|
autotools: added windows.gaming.input.h (and SDL_JOYSTICK_WGI) detection
|
|
|
2371b247
|
2021-10-31T18:27:51
|
|
windows: improve feature detection consistency between CMake and non-CMake builds
|
|
839ca0ea
|
2021-11-03T16:35:24
|
|
SDL_OpenURL (macOS): try to open path if the url cannot be opened (#4830)
* SDL_OpenURL (macOS): try to open path if the url cannot be opened
* SDL_OpenURL (macOS): use CFURLCreateWithBytes & LSOpenCFURLRef to correctly escape input
* fix type casting + indentation
|
|
e2ba84a5
|
2021-11-02T19:30:17
|
|
testtimer: Be more like the C90's.
|
|
|
4ab7ee19
|
2021-11-02T18:58:06
|
|
testtimer: Add basic sanity check for SDL_GetTicks*()
|
|
|
8593076d
|
2021-11-02T16:04:36
|
|
Fixed whitespace
|
|
62629c2b
|
2021-11-02T22:17:41
|
|
Fix 64-bit timeval/timespec delta calculations
|
|
|
6d5edfa7
|
2021-11-02T15:59:26
|
|
Fixed crash on Android 8, due to bugs in AAudio implementation
|
|
|
c948b936
|
2021-11-02T15:57:24
|
|
Added note for Android 12 API level
|
|
43ddc59f
|
2021-11-02T16:56:14
|
|
Export SDL_LinuxSetThreadPriorityAndPolicy() function (#4877)
It's marked as being a public symbol internally, however, it was missing from the header files and not visible in the shared library. This adds it to the necessary headers and to the DynAPI list to expose it for use by applications.
Co-authored-by: Frank Praznik <frank.praznik@oh.rr.com>
|
|
848d7b12
|
2021-11-02T16:12:55
|
|
Vita: Implement command batching
|
|
|
3f7a94fc
|
2021-11-02T15:16:48
|
|
Vita: Remove FillRects
|
|
|
f73376ae
|
2021-11-02T00:31:25
|
|
events: Add logging for SDL_CONTROLLERTOUCHPAD*, SDL_CONTROLLERSENSORUPDATE, and SDL_SENSORUPDATE events
|
|
2379c528
|
2021-10-25T11:04:42
|
|
os/2: Don't try to be clever with the 32-bit GetTicks fallback.
|
|
|
d78cb9e9
|
2021-10-23T19:27:10
|
|
testtimer: added SDL_GetTicks64() calls.
|
|
|
228219dc
|
2021-10-23T15:30:45
|
|
include: Improved SDL_GetTicks*() documentation a little.
|
|
|
cca79d32
|
2021-10-23T15:30:20
|
|
android: Patched SDL_GetTicks64() to compile.
|
|
|
affb183e
|
2021-10-23T15:20:32
|
|
unix: Fixed SDL_GetTicks64 function signature.
|
|
|
99c9727d
|
2021-10-23T15:00:31
|
|
timer: Added SDL_GetTicks64(), for a timer that doesn't wrap every ~49 days.
Note that this removes the timeGetTime() fallback on Windows; it is a
32-bit counter and SDL2 should never choose to use it, as it only is needed
if QueryPerformanceCounter() isn't available, and QPC is _always_ available
on Windows XP and later.
OS/2 has a similar situation, but since it isn't clear to me that similar
promises can be made about DosTmrQueryTime() even in modern times, I decided
to leave the fallback in, with some heroic measures added to try to provide a
true 64-bit tick counter despite the 49-day wraparound. That approach can
migrate to Windows too, if we discover some truly broken install that doesn't
have QPC and still depends on timeGetTime().
Fixes #4870.
|
|
|
16845eef
|
2021-10-30T12:06:58
|
|
cmake: Add SDL include path when building tests
The tests can't find any of the SDL includes otherwise
|
|
|
0d631c74
|
2021-10-30T12:10:03
|
|
CI: Build tests for Windows, macOS, and Linux
|
|
|
210713a6
|
2021-10-31T19:11:09
|
|
cmake: Work around bug in opengl32.lib detection on MSVC ARM64
|
|
|
77141e84
|
2021-10-31T18:53:11
|
|
cmake: Fix test linking with MinGW
|
|
|
618b0d41
|
2021-10-30T12:05:11
|
|
cmake: Remove SDL2_test_resources dummy hack
It doesn't work properly on MSVC because the dummy target fails to link
|
|
|
7e8469d1
|
2021-10-31T09:31:25
|
|
cmake: Fix MinGW build break in WGI joystick driver
Just look for windows.gaming.input.h rather than assuming its presence
or absence based on other CMake variables.
Fixes MinGW builds in CI
|
|
fba82ad1
|
2021-10-31T12:38:08
|
|
Remove sceGxmFinish from RenderPresent on Vita. Make sure that rendering is finished on render texture during locking
|
|
|
f3640e26
|
2021-10-31T08:47:00
|
|
tests: minor update to acinclude.m4::pkg.m4
|
|
|
cc3fe1a1
|
2021-10-31T08:25:24
|
|
tests: don't fail configury if libunwind is not available.
|
|
|
c4016277
|
2021-10-31T08:14:50
|
|
testsurround.c: remove unnecessary libc includes and stdint.h types
|
|
|
e28e3993
|
2021-10-31T08:00:20
|
|
testsurround.c: add missing newline at end of file.
|
|
|
a01aaf05
|
2021-10-30T21:42:07
|
|
Fixed compiler warning
|
|
|
cd66c050
|
2021-10-29T01:11:59
|
|
testsurround: Add surround sound channel tester
|
|
|
27369b3e
|
2021-10-29T23:28:50
|
|
docs: Add README-riscos.md
|
|
|
ce093891
|
2021-10-26T23:10:30
|
|
Add RISC OS builds to GitHub Actions
|
|
|
4d3da5b7
|
2021-10-26T21:51:29
|
|
riscos: Disable the mouse pointer for now
|
|
|
1c256b89
|
2021-10-26T13:42:34
|
|
riscos: Fix enumerating screen modes
|
|
|
5a3c97f3
|
2021-10-25T22:55:02
|
|
riscos: Fix detection of the current mode
|
|
|
53b3db0c
|
2021-09-28T17:59:16
|
|
Handle the KMOD_SCROLL modifier on RISC OS
|
|
|
1268984e
|
2021-09-09T21:09:50
|
|
Implement mouse input on RISC OS
|
|
|
f7f54f0d
|
2021-08-06T23:38:46
|
|
Implement keyboard input on RISC OS
Partially based on a patch from http://www.riscos.info/websvn/listing.php?repname=gccsdk&path=%2Ftrunk%2Fautobuilder%2Flibraries%2Fsdl%2Flibsdl2%2F&rev=7174#a6401c766f408f1ea356e6977894cc6a5
Currently lacks support for mapping scancodes to keycodes.
|
|
|
f8a8ca3e
|
2021-08-05T23:16:29
|
|
Support proper mode switching on RISC OS
|
|
|
fe9bb747
|
2021-02-12T23:46:11
|
|
riscos: Refactor framebuffer code
|
|
|
25c71748
|
2020-02-13T21:55:08
|
|
Add a barebones RISC OS video driver
|
|
|
a5598649
|
2021-10-30T19:30:34
|
|
x11/wayland: Fix signal handling while blocking in WaitEventTimeout()
Add a new flag to avoid suppressing EINTR in SDL_IOReady(). Pass the
flag in WaitEventTimeout() to ensure that a SIGINT will wake up
SDL_WaitEvent() without another event coming in.
|
|
|
c97c4687
|
2021-10-30T15:56:54
|
|
core: Convert SDL_IOReady()'s 2nd parameter to flags
|
|
81fe2ccb
|
2021-10-31T02:54:20
|
|
cmake: Add missing SDL_JOYSTICK_WGI in config step
SDL_config.h *can* define SDL_JOYSTICK_WGI. On builds with the Windows
10 SDK available, this allow implementing trigger rumbling on Xbox One
controllers. The files included in the Visual Studio Solution in
VisualC\SDL.sln *do* have this define set.
fix #4859
|
|
|
8a4a282a
|
2021-10-30T16:02:12
|
|
alsa: Make hotplug thread optional.
Even without the thread, it'll do an initial hardware detection at startup,
but there won't be any further hotplug events after that. But for many cases,
that is likely complete sufficient.
In either case, this cleaned up the code to no longer need a semaphore at
startup.
Fixes #4862.
|
|
|
26706319
|
2021-10-30T05:53:12
|
|
Ignore the ASRock LED controller, it's not a joystick
|
|
|
ac54d57a
|
2021-10-26T20:02:38
|
|
event: Check subsystem initialization before events or devices
SDL_WasInit() is cheaper SDL_NumJoysticks()/SDL_NumSensors().
|
|
|
1bc6dc3e
|
2021-10-26T20:02:04
|
|
event: Cap maximum wait time if sensor or joystick subsystems are active
Joystick and sensor subsystems require periodic polling to detect new devices.
|
|
|
2bf36bfa
|
2021-10-24T21:28:04
|
|
wayland: Implement WaitEventTimeout() and SendWakeupEvent()
We can have spurious wakeups in WaitEventTimeout() due to Wayland events
that don't end up causing us to generate an SDL event. Fortunately for us,
SDL_WaitEventTimeout_Device() handles this situation properly by calling
WaitEventTimeout() again with an adjusted timeout.
|
|
378c5d7f
|
2021-10-23T16:26:25
|
|
make aclocal install relative
|
|
c7dafb15
|
2021-10-27T01:36:05
|
|
Sync wiki -> header
|
|
|
6b8e880a
|
2021-10-26T20:27:34
|
|
checkkeysthreads: Create a renderer for window display on Wayland
Applies checkkeys patch from 105f1206 to checkkeysthreads.
|
|
|
179a04f8
|
2021-10-26T21:01:05
|
|
fnsince.pl: Don't print out the version numbers if updating the wiki.
|
|
|
85edbc92
|
2021-10-26T19:00:06
|
|
fnsince.pl: Added a way to sync this information to the wiki.
This will let us automate this so it's managed for us, and as things go
from development to official releases, the documentation will automatically
update!
|
|
|
f5de45ae
|
2021-10-26T18:59:21
|
|
fnsince.pl: Found a few more incorrect versions.
|
|
|
e8fbcf89
|
2021-10-26T12:12:52
|
|
fnsince.pl: a script to list version when all public APIs were added.
|
|
|
1c641460
|
2021-10-26T15:30:06
|
|
Sync wiki -> header
|
|
|
9c799802
|
2021-10-26T15:18:26
|
|
Vita: fix IME input languages
|
|
|
7ac0c73a
|
2021-10-25T21:40:04
|
|
regenerated test/configure
|
|
c57bcb47
|
2021-10-23T14:46:03
|
|
test: Fix building with libunwind under autotools
There are two issues which are stopping the SDL tests from building on
my machine:
- libunwind is not being linked
- Even if it is, it is missing several symbols.
The first is fixed by having the test programs link against libunwind if
available. Technically, SDL2_test should be linking against it, as it's
used in SDL_test_memory.c, but as SDL2_test is a static library, it
can't itself import libunwind. We just assume that if it's present on
the system, we should link it directly to the test programs. This should
strictly be an improvement, as the only case where this'd fail is if
SDL2 was compiled when libunwind was present, but the tests are being
compiled without it, and that'd fail anyway.
The second is fixed by #define-ing UNW_LOCAL_ONLY before including
libunwind.h: this is required to make libunwind link to predicatable
symbols, in what can only be described as a bit of a farce. There are a
few more details in the libunwind man page, but the gist of it is that
it disables support for "remote unwinding": unwinding stack frames in a
different process (and possibly from a different architecture?):
http://www.nongnu.org/libunwind/man/libunwind(3).html
Note that I haven't tried this with CMake: I suspect that it'll work,
though, as the CMakeLists.txt seems to have SDL2 link against libunwind if
it's present. This adds an ugly extra dependency to SDL2, but does mean
that issue 1 isn't present. The UNW_LOCAL_ONLY change shouldn't be
build-system-specific.
|
|
|
fdb27e0b
|
2021-10-25T09:04:07
|
|
cmake: Use host wayland-scanner only (#4873)
|
|
|
408a93a1
|
2021-10-23T15:43:04
|
|
wayland: Use multi-thread event reading APIs
Wayland provides the prepare_read()/read_events() family of APIs for
reading from the display fd in a deadlock-free manner across multiple
threads in a multi-threaded application. Let's use those instead of
trying to roll our own solution using a mutex.
This fixes an issue where a call to SDL_GL_SwapWindow() doesn't swap
buffers if it happens to collide with SDL_PumpEvents() in the main
thread. It also allows coexistence with other code or toolkits in
our process that may want read and dispatch events themselves.
|
|
4960cc3d
|
2021-10-25T16:18:40
|
|
Fixed a few warnings
|
|
|
b7933945
|
2021-10-25T13:46:40
|
|
SDL_Renderer: make clear that we use render geometry for fillrect/copy/copyex when there is no specific back-end implementation (currently software, PSP, directfb)
|
|
|
b3f9d8f3
|
2021-10-25T07:05:50
|
|
remove unused local vars after the latest commits.
|
|
|
502e9c3b
|
2021-10-24T17:16:49
|
|
SDL_Renderer simplifications:
- Factorize PrepQueueCmdDraw{,DrawTexture,Solid) into one single function
- Change SDL_Texture/Renderer r,g,b,a Uint8 into an SDL_Color, so that it can be passed directly to RenderGeometry
- Don't automatically queue a SET_DRAW_COLOR cmd for RenderGeometry (and update GLES2 renderer)
|
|
|
23e252bf
|
2021-10-02T14:57:40
|
|
DirectFB: provide RenderCopyEx via RenderGeometry
|
|
|
79732c9d
|
2021-09-25T11:35:20
|
|
Remove FillRects from back-end, where RenderGeometry can be used
|
|
|
f02ad282
|
2021-09-25T11:31:18
|
|
Remove FillRects from back-end, where RenderGeometry can be used
|
|
|
70b10c75
|
2021-09-24T22:39:49
|
|
Use correct indices when using RenderGeometry / FillRects
|
|
|
16beed9a
|
2021-09-24T17:09:04
|
|
Less code since color is constant when done with triangles
|
|
|
99a34643
|
2021-09-24T09:42:04
|
|
OpenGLES2: LINES and POINTS successive commands are combined into a single draw call
(using the same case for DRAW_GEOMETRY)
|
|
|
f0cdc1d0
|
2021-09-24T09:38:25
|
|
OpenGLES2: remove FillRects, since it's can be done with RenderGeometry
|
|
|
37c39d5c
|
2021-09-23T22:45:45
|
|
Use geometry to implement FillRects
|
|
|
b0eef52f
|
2021-09-23T22:32:29
|
|
GLES2 batching: probably need to check for blendMode changes
|
|
|
c27e1249
|
2021-09-20T17:17:34
|
|
Remove SDL_HAVE_RENDER_GEOMETRY define
|
|
|
77026f67
|
2021-09-20T17:09:44
|
|
Metal: remove RenderCopy and RenderCopyEx from back-end
|
|
|
0e5160a0
|
2021-09-20T17:01:33
|
|
VITA: remove RenderCopy and RenderCopyEx from back-end
|
|
|
73f4ab4c
|
2021-09-20T16:57:21
|
|
Direct3D11: remove RenderCopy and RenderCopyEx from back-end
|
|
|
ab758398
|
2021-09-20T16:53:03
|
|
Direct3D: remove RenderCopy and RenderCopyEx from back-end
|
|
|
1fe7e361
|
2021-09-20T16:46:16
|
|
OpenGL: a few opengl functions become unused
|
|
|
88548070
|
2021-09-20T16:40:47
|
|
OpenGLES: remove RenderCopy and RenderCopyEx from back-end
|
|
|
d1925154
|
2021-09-20T16:33:49
|
|
OpenGL: remove RenderCopy and RenderCopyEx from back-end
|
|
|
b92056bb
|
2021-09-20T16:33:03
|
|
OpenGLES2: remove RenderCopy and RenderCopyEx from back-end
|
|
|
76f9fb96
|
2021-09-20T16:32:08
|
|
Use RenderGeometry to implement RenderCopy and RenderCopyEx at higher level
|
|
|
08797ada
|
2021-09-19T00:39:28
|
|
opengles2: Attempt to batch RenderCopy calls into a single glDrawArrays call.
|
|
1f0eb03a
|
2021-10-24T23:54:26
|
|
Fix PS5 mapping with HID-PLAYSTATION driver (#4675)
* add missing PS5 Linux GUID for Bluetooth
* Fix PS5 Mapping to work with HID-Playstation driver
|
|
|
f499168c
|
2021-10-24T15:54:57
|
|
x11: Use SDL_IOReady() instead of calling select() directly
SDL_IOReady() properly handles EINTR and can use poll() if available.
|
|
ba4ef461
|
2021-10-23T15:28:13
|
|
macOS: Fix implicit integer downcast warnings
|
|
|
d9d8f51e
|
2021-10-23T14:37:47
|
|
wikiheaders.pl: Add support for deprecated functions.
|