kmx git

Commit	Date	Message
5b65e0af	2020-05-15T21:12:23	Fixed bug 5100 - compilation CMake Android armeabi-v7a (Thanks Steve Robinson!) fatal error: 'cpu-features.h' file not found on CMake Android armeabi-v7a
eadc8693	2020-05-11T14:31:04	Fixed bug 5103 - Port fcitx support to both fcitx 4 & 5 wengxt Due to the new major fcitx version is coming close, the existing code need to be ported to use new Fcitx dbus interface. The new dbus interface is supported by both fcitx 4 and 5, and has a good side effect, which is that it will work with flatpak for free. Also the patch remove the dependency on fcitx header. Instead, it just hardcodes a few enum value in the code so need to handle the different header for fcitx4 or 5.
fa23e3d0	2020-05-04T02:27:29	locale: Implemented SDL_GetPreferredLocales(). This was something I proposed a long time ago, Sylvain Becker did additional work on it, then back to me. Fixes Bugzilla #2131.
7ac82710	2020-04-24T02:06:53	cmake: various Haiku settings were accidentally under "if(SDL_VIDEO)"
952bac7c	2020-04-13T15:22:09	cmake: use check_symbol_exists, not check_function_exists (thanks, Manuel!) This fixes the problem where we think iOS has fseeko64, etc, but doesn't. Fixes Bugzilla #4885.
abcc6706	2020-04-12T13:24:36	build: Don't duplicate Libs in Libs.private in pkg-config file pkg-config already prepends Libs to Libs.private when you specify --static so there's no need to duplicate them. Most other projects don't do this.
99f87a71	2020-04-11T23:38:34	build: Merge pkg-config Libs.private into Libs for static-only builds A project being built entirely statically will call pkg-config with --static, which utilises the Libs.private field. Conversely it will not use --static when not being built entirely statically, even if there is only a static build of SDL available. This will most likely cause the build to fail due to underlinking unless we merge the Libs fields. This is what the Meson build system does when it generates pkg-config files. This also also follows the behaviour of sdl2-config. At the same time, the runtime linker flags are not applicable to static-only builds so only add them for shared builds.
d292f6bd	2020-04-10T12:17:14	stdlib: Add SDL_trunc and SDL_truncf
3180ba81	2020-04-08T08:34:27	First pass at Windows sensor implementation
2be75c6a	2020-03-13T19:08:45	Fixed bug 5028 - Virtual Joysticks (new joystick backend) David Ludwig I have created a new driver for SDL's Joystick and Game-Controller subsystem: a Virtual driver. This driver allows one to create a software-based joystick, which to SDL applications will look and react like a real joystick, but whose state can be set programmatically. A primary use case for this is to help enable developers to add touch-screen joysticks to their apps. The driver comes with a set of new, public APIs, with functions to attach and detach joysticks, set virtual-joystick state, and to determine if a joystick is a virtual-one. Use of virtual joysticks goes as such: 1. Attach one or more virtual joysticks by calling SDL_JoystickAttachVirtual. If successful, this returns the virtual-device's joystick-index. 2. Open the virtual joysticks (using indicies returned by SDL_JoystickAttachVirtual). 3. Call any of the SDL_JoystickSetVirtual* functions when joystick-state changes. Please note that virtual-joystick state will only get applied on the next call to SDL_JoystickUpdate, or when pumping or polling for SDL events (via SDL_PumpEvents or SDL_PollEvent). Here is a listing of the new, public APIs, at present and subject to change: ------------------------------------------------------------ /** * Attaches a new virtual joystick. * Returns the joystick's device index, or -1 if an error occurred. / extern DECLSPEC int SDLCALL SDL_JoystickAttachVirtual(SDL_JoystickType type, int naxes, int nballs, int nbuttons, int nhats); /* * Detaches a virtual joystick * Returns 0 on success, or -1 if an error occurred. / extern DECLSPEC int SDLCALL SDL_JoystickDetachVirtual(int device_index); /* * Indicates whether or not a virtual-joystick is at a given device index. / extern DECLSPEC SDL_bool SDLCALL SDL_JoystickIsVirtual(int device_index); /* * Set values on an opened, virtual-joystick's controls. * Returns 0 on success, -1 on error. / extern DECLSPEC int SDLCALL SDL_JoystickSetVirtualAxis(SDL_Joystick joystick, int axis, Sint16 value); extern DECLSPEC int SDLCALL SDL_JoystickSetVirtualBall(SDL_Joystick * joystick, int ball, Sint16 xrel, Sint16 yrel); extern DECLSPEC int SDLCALL SDL_JoystickSetVirtualButton(SDL_Joystick * joystick, int button, Uint8 value); extern DECLSPEC int SDLCALL SDL_JoystickSetVirtualHat(SDL_Joystick * joystick, int hat, Uint8 value); ------------------------------------------------------------ Miscellaneous notes on the initial patch, which are also subject to change: 1. no test code is present in SDL, yet. This should, perhaps, change. Initial development was done with an ImGui-based app, which potentially is too thick for use in SDL-official. If tests are to be added, what kind of tests? Automated? Graphical? 2. virtual game controllers can be created by calling SDL_JoystickAttachVirtual with a joystick-type of SDL_JOYSTICK_TYPE_GAME_CONTROLLER, with naxes (num axes) set to SDL_CONTROLLER_AXIS_MAX, and with nbuttons (num buttons) set to SDL_CONTROLLER_BUTTON_MAX. When updating their state, values of type SDL_GameControllerAxis or SDL_GameControllerButton can be casted to an int and used for the control-index (in calls to SDL_JoystickSetVirtual* functions). 3. virtual joysticks' guids are mostly all-zeros with the exception of the last two bytes, the first of which is a 'v', to indicate that the guid is a virtual one, and the second of which is a SDL_JoystickType that has been converted into a Uint8. 4. virtual joysticks are ONLY turned into virtual game-controllers if and when their joystick-type is set to SDL_JOYSTICK_TYPE_GAMECONTROLLER. This is controlled by having SDL's default list of game-controllers have a single entry for a virtual game controller (of guid, "00000000000000000000000000007601", which is subject to the guid-encoding described above). 5. regarding having to call SDL_JoystickUpdate, either directly or indirectly via SDL_PumpEvents or SDL_PollEvents, before new virtual-joystick state becomes active (as specified via SDL_JoystickSetVirtual* function-calls), this was done to match behavior found in SDL's other joystick drivers, almost all of which will only update SDL-state during SDL_JoystickUpdate. 6. the initial patch is based off of SDL 2.0.12 7. the virtual joystick subsystem is disabled by default. It should be possible to enable it by building with SDL_JOYSTICK_VIRTUAL=1 Questions, comments, suggestions, or bug reports very welcome!
983bbf9e	2020-03-10T18:35:31	Backed out changeset 51622f74dc85
93ed3c8b	2020-03-10T18:25:47	Updated SDL to version 2.0.13 for development builds
4fb06a2a	2020-03-10T18:25:47	Updated SDL to version 2.0.13 for development builds
74ed2156	2020-03-01T14:58:16	Updated version to 2.0.12 for release candidate build
1d624aa5	2020-02-16T00:08:36	Further improvements for bug 4128 - CMAKE: Generated target import file contains incorrect include path Mohamed It would be useful to be able to do either `#include "SDL2/SDL.h"` or `#include "SDL.h"`. This patch allows that and adds compatibility with other build systems. It also allows differentiating between SDL1 and SDL2.
8f1a916a	2020-02-13T20:50:47	Add basic support for compiling on RISC OS
598bcfc5	2020-01-06T07:06:58	Fixed bug 4928 - CMakeLists.txt: put cmake package helpers in proper libdir Tiago O. Use LIB_SUFFIX variable to determine the correct path.
183929bd	2019-12-03T02:42:53	cmake: ${SDL_CMAKE_DEBUG_POSTFIX} needs to be wrapped in quotes. Otherwise, if it's an empty string, it causes problems. Fixes Bugzilla #4117.
0d0ec5fe	2019-11-26T20:41:00	CMakeLists.txt: sync DYLIB_CURRENT_VERSION to Xcode project
8cdb4526	2019-11-21T10:33:56	CMakeLists.txt: add several missing function checks for unix case.
65096446	2019-11-20T16:42:50	Improved XInput VID/PID detection and added SDL_wcsstr() and SDL_wcsncmp()
eb8f14bb	2019-11-20T20:40:50	added SDL_strtokr() as a replacement for POSIX strtok_r (bug #4046.)
b7df2603	2019-10-24T23:17:19	cmake: added support for enabling the ARM SIMD/NEON code.
ffc7d091	2019-10-01T14:00:02	endpointvolume.h checks not needed since changeset 13078:8ab094a9df6b .
68985371	2019-09-24T16:36:48	offscreen: Add new video driver backend Offscreen The Offscreen video driver is intended to be used for headless rendering as well as allows for multiple GPUs to be used for headless rendering Currently only supports EGL (OpenGL / ES) or Framebuffers Adds a hint to specifiy which EGL device to use: SDL_HINT_EGL_DEVICE Adds testoffscreen.c which can be used to test the backend out Disabled by default for now
6398abe5	2019-09-23T18:24:03	CMake: bug-fix for tvOS support tvOS Device support wasn't working, at least not with the current-latest tvOS release (13.0), with CMake failing during its configuration stage.
3fe2d836	2019-09-22T10:37:16	Updated SDL development builds to version 2.0.11
ec65a34b	2019-08-27T12:30:20	CMake: tvOS support/fixes To use, set the following CMake variables when running CMake's configuration stage: - CMAKE_SYSTEM_NAME=tvOS - CMAKE_OSX_SYSROOT=<SDK> (examples: appletvos, appletvsimulator, appletvos12.4, /full/path/to/AppleTVOS.sdk, etc.) - CMAKE_OSX_ARCHITECTURES=<semicolon-separated list of CPU architectures> (example: "arm64;x86_64")
b13c951c	2019-08-27T11:07:43	CMake: iOS support added When using a recent version of CMake (3.14+), this should make it possible to: - build SDL for iOS, both static and dynamic - build SDL test apps (as iOS .app bundles) - generate a working SDL_config.h for iOS (using SDL_config.h.cmake as a basis) To use, set the following CMake variables when running CMake's configuration stage: - CMAKE_SYSTEM_NAME=iOS - CMAKE_OSX_SYSROOT=<SDK> (examples: iphoneos, iphonesimulator, iphoneos12.4, /full/path/to/iPhoneOS.sdk, etc.) - CMAKE_OSX_ARCHITECTURES=<semicolon-separated list of CPU architectures> (example: "arm64;armv7s") Examples: - for Simulator, using the latest, installed SDK: cmake path/to/SDL -DCMAKE_SYSTEM_NAME=iOS -DCMAKE_OSX_SYSROOT=iphonesimulator -DCMAKE_OSX_ARCHITECTURES=x86_64 - for Device, using the latest, installed SDK, 64-bit only cmake path/to/SDL -DCMAKE_SYSTEM_NAME=iOS -DCMAKE_OSX_SYSROOT=iphoneos -DCMAKE_OSX_ARCHITECTURES=arm64 - for Device, using the latest, installed SDK, mixed 32/64 bit cmake path/to/SDL -DCMAKE_SYSTEM_NAME=iOS -DCMAKE_OSX_SYSROOT=iphoneos -DCMAKE_OSX_ARCHITECTURES="arm64;armv7s" - for Device, using a specific SDK revision (iOS 12.4, in this example): cmake path/to/SDL -DCMAKE_SYSTEM_NAME=iOS -DCMAKE_OSX_SYSROOT=iphoneos12.4 -DCMAKE_OSX_ARCHITECTURES=arm64 - for Simulator, using the latest, installed SDK, and building SDL test apps (as .app bundles): cmake path/to/SDL -DSDL_TEST=1 -DCMAKE_SYSTEM_NAME=iOS -DCMAKE_OSX_SYSROOT=iphonesimulator -DCMAKE_OSX_ARCHITECTURES=x86_64
0a9c74aa	2019-08-27T11:38:43	Fixed bug 3918 - HIDAPI, CMake support for android project
155087d1	2019-08-11T15:23:37	Fixed bug 3918 - CMake support for android project
e9ec7d41	2019-08-05T23:46:09	Fixed bug 4354 - CMake builds do not correctly enable IME on Linux Callum McGing While the CMake build checks for ibus and does enable the ibus backend with set(HAVE_IBUS_IBUS_H TRUE), this does not define SDL_USE_IME, thus CMake built SDL2 (as in Arch Linux) cannot use IME at all. The attached patch fixes this behaviour when building against ibus. IME support will still fail when only fcitx is available on the build system.
aebaa316	2019-08-05T12:35:32	Add public APIs for creating a Metal view attached to an SDL window. Add SDL_metal.h.
e149f4c4	2019-07-31T11:34:00	cmake: Fix locating libusb header at configure-time Removing the CheckUSBHID call is necessary to avoid caching the failed header check result before we find libusb via pkg-config.
f7d82e56	2019-07-31T12:20:55	hidapi: Add SDL_hidapi.c, allows support for multiple hidapi backends. This is currently supported on Linux and macOS. iOS and Android are not supported at all, Windows support could be added with some changes to the libusb backend. The Visual Studio and Xcode projects do not use this feature. Based on Valve Software's hid.cpp, written in collaboration with Andrew Eikum.
70f0b093	2019-07-12T13:40:58	cmake: Add setupapi library to Windows build dependencies (hidapi needs it). Fixes Bugzilla #4719.
66d4d8e2	2019-07-08T16:46:52	cmake: Added HIDAPI support.
7f78d0f0	2019-06-21T22:01:27	Fixed bug 4684 - GLES1 variables missing under Android with CMake Braden Obrzut https://hg.libsdl.org/SDL/file/7dc39b047055/CMakeLists.txt#l911 I believe the following should also be specified there: set(SDL_VIDEO_OPENGL_ES 1) set(SDL_VIDEO_RENDER_OGL_ES 1) As it is now GLES1 support is missing when building for Android despite it linking to the library.
67c67f3a	2019-06-17T10:13:28	Updated version to 2.0.10
1b73d578	2019-06-08T18:32:29	Temporary fix for bug 4254 - a _lot_ of strict aliasing warnings Ozkan Sezer A horde of strict aliasing violation warnings are emitted from joystick layer, and also from a few other places. This happens with gcc-4.4.7 on Linux CentOS 6.10. Some other sysjoystick would possibly have the same warnings. Attached my full log here. Example entry: src/joystick/SDL_joystick.c: In function 'SDL_GetJoystickGUIDInfo': src/joystick/SDL_joystick.c:1094: warning: dereferencing pointer '({anonymous})' does break strict-aliasing rules
59483c64	2019-06-08T14:36:03	Fixed bug 4593 - Respect CMake's BUILD_SHARED_LIBS default behavior tschwinger Respect the BUILD_SHARED_LIBS variable when defined, and build either shared or static libs, which is CMake's default behavior (See https://cmake.org/cmake/help/latest/variable/BUILD_SHARED_LIBS.html). If the variable is not defined, the current behavior remains unchanged and both variants are built where the platform supports it. This way, it remains possible to build both in one shot, which seems convenient for distro builds and useful to promote some consistency between them.
68bb8d6c	2019-06-08T14:34:38	Fixed bug 4594 - Fix install location of CMake targets on Apple platforms tschwinger Followup to #3651 As already noted by Ryan, no framework is being built, so we better install to lib/cmake. That code was originally part of a patch submitted by David Demelier, whose credit BTW got lost (I combined his patch for #3572 with fixes for #2576 and #3613 resulting in #3651 because things started to depend on another). I tested that the configuration files are found correctly in the new location on MacOS X based on a hint to the root (see https://cmake.org/cmake/help/latest/command/find_package.html#search-procedure).
50aab198	2019-05-21T17:33:31	Fixed bug 4639 - CMake build does not generate libhidapi.so for Android Manuel Sabogal I noticed that the current Android.mk builds a libhidapi.so library for Android but the CMake build hasn't been updated to do so. I'll attach a patch that fixes this issue.
f79190f4	2019-04-23T07:59:31	Use _Exit() when available
af4bbb30	2019-03-25T23:01:32	configure.in: Rename to configure.ac to fix an 'aclocal' warning Also rename references in related files.
8a5a05c1	2019-03-15T15:51:05	events: Let arbitrary signals to simulate iOS/Android backgrounding events. This lets you build a custom embedded device that roughly offers the "this process is going to the background NOW" semantics of SDL on a mobile device.
510b01f5	2018-12-03T20:14:35	Fix WORKING_DIR parameter
d4a21f54	2018-12-02T02:43:32	cmake: Comment out some debug logging that can upset build environments. Something about the dashes, colons, numbers makes some builders believe this is an error message.
bc57ac27	2018-11-02T21:34:17	mir: Removed mir client support. Fixes Bugzilla #4288.
04761d7d	2018-10-25T11:11:02	CMakeLists.txt: set dylib version numbers properly. (bug #2915.)
c17d6299	2018-09-28T21:19:27	Mark a subsystem as dummy, not disabled, if it was intended to be compiled in. From Tom Black: I'm having problems initializing the sensor module. I'm compiling with a standard ./configure && make && sudo make install, and the module says it's enabled, but SDL_Init(SDL_INIT_EVERYTHING) is failing with SDL_GetError() returning "SDL not built with sensor support".
14d2ec80	2018-09-28T21:03:39	commit 8f4dedc039190f5e734c47dcc4fc021b5793b659 Author: Micha? Janiszewski <janisozaur+signed@gmail.com> Date: Fri Sep 28 20:38:04 2018 +0200 CMake: fix building tests on Linux In case where libunwind.h has been found, it will be used by compiler, but linker wasn't updated to reflect use of this new library.
b11c75e9	2018-09-28T13:41:04	configury, cmake: add check for endpointvolume.h : add HAVE_ENDPOINTVOLUME_H, HAVE_MMDEVICEAPI_H and HAVE_AUDIOCLIENT_H in SDL_config.h.in, SDL_config.h.cmake, SDL_config_windows.h, and in SDL_config_winrt.h.
cf7460e4	2018-09-28T11:30:50	configury, cmake: make wasapi option independent of directx.
bc6c1997	2018-09-26T10:08:14	Updated version to 2.0.9
8aaef4b9	2018-09-24T08:41:59	Fixed bug 3166 - It would be nice, if SDL would support including SDL project as a subdirectory into another CMake project Wayde Reitsma After attempting to use SDL2 in the way described in this bug, I found the main issue was the includes not being added to the compiler command. I found the issue was that the target_include_directories commands for the SDL2, SDL2-static and SDL2main targets only sets the public includes for installations using the INSTALL_INTERFACE generator expression. I have written a patch to CMakeLists.txt that fixes this issue by adding another item to the target_include_directories commands, utilizing the BUILD_INTERFACE generator expression to correctly add the include directory during builds.
c19516b5	2018-09-18T11:49:42	cmake: correctly report Vulkan support at configure time (thanks, Tiago!). Fixes Bugzilla #4262.
9753b9cc	2018-09-02T23:57:06	CMakeLists.txt: fix typo SDL_SENSORS_DISABLED -> SDL_SENSOR_DISABLED
df5d565f	2018-08-23T14:32:30	cmake: add sensor subsystem to the build.
7c3040e0	2018-08-21T12:11:34	First pass on the new SDL sensor API
58021b38	2018-08-18T17:23:40	Correct the name of the SDL shared library in CMake for Mac OS
b4fe7412	2018-08-04T11:52:46	SDL_exp
4d4bb2b0	2018-08-02T16:21:43	cmake: use WINDOWS instead of WIN32.
88577916	2018-07-01T17:01:04	make WASAPI configurable in autofoo and cmake (default is on.) closes bug #3798.
3a11bba2	2018-06-29T18:29:17	Remove "lib" prefix from DLL file on MinGW builds closes bug #4209.
5e8c8167	2018-04-15T09:37:51	Fixed bug 4135 - Broken symlink libSDL2.so since rev11940 Tiago O. Symlink points to the wrong folder, and target will always have debug postfix, so it'll be broken for other build types.
9856d967	2018-04-11T06:16:23	Fix the include path in the installed CMake target import file Previously the include path was {INSTALL_PREFIX}/include, it is now {INSTALL_PREFIX}/include/SDL2 to be consistent with the other build and package configuration systems. Fixes #4128.
6b5ed0fd	2018-04-10T08:03:54	Added debug postfix to install command and fixed library path
0a5c1065	2018-03-10T21:16:14	Fix ARM builds with MSVC
5cbb90da	2018-02-25T19:22:47	cmake: Set debug library name suffix per target instead of setting it globally. Don't add a suffix on android
6cf4d0e4	2018-02-24T08:59:58	Fixed bug 4092 - CMake support for building everything in the "test" directory Eric Wasylishen Patch to support building the tests with cmake. Disabled by default, use: "cmake .. -DSDL_TEST=YES" to enable the tests. Tested on macOS 10.13 with the ninja, makefile, and Xcode generators, and Windows 10 with the Visual Studio 2017 generator.
c329381f	2018-02-07T14:03:24	Description: fix installation of shared library for Android Author: Boris Pek <tehnick-8@yandex.ru> Last-Update: 2018-01-10
11c348b4	2018-01-17T11:53:09	SDL_log10
f1ec8a5f	2017-12-11T12:00:12	Check for immintrin.h before using it in SDL_cpuinfo.h
351d6d47	2017-12-06T12:24:32	audio: Port WASAPI to WinRT, remove XAudio2 backend. XAudio2 doesn't have capture support, so WASAPI was to replace it; the holdout was WinRT, which still needed it as its primary audio target until the WASAPI code code be made to work. The support matrix now looks like: WinXP: directsound by default, winmm as a fallback for buggy drivers. Vista+: WASAPI (directsound and winmm as fallbacks for debugging). WinRT: WASAPI
57ebc727	2017-12-04T20:35:01	Fixed bug 3975 - Add GLES2 support for macOS via ANGLE library Andrey Seems latest google angle library successfully built & tested under macOS'es. https://github.com/google/angle We need to use GLES2 to implement true cross-platform code.
a4b33d74	2017-11-20T00:03:23	Fixed bug 3959 - cmake build broken by commit 11702 (7fdbffd47c0e) due to typo Mate Nagy There is a typo in CMakeLists.txt that makes CMake exit with failure. Change that causes the problem: (Notice the double ending brackets) ${SDL2_SOURCE_DIR}/src/video/.c) + ${SDL2_SOURCE_DIR}/src/video/yuv2rgb/.c) Fix: Just remove the first ending bracket resulting in: ${SDL2_SOURCE_DIR}/src/video/.c ${SDL2_SOURCE_DIR}/src/video/yuv2rgb/.c)
a6a4e27a	2017-11-12T22:51:12	Updated SDL's YUV support, many thanks to Adrien Descamps New functions get and set the YUV colorspace conversion mode: SDL_SetYUVConversionMode() SDL_GetYUVConversionMode() SDL_GetYUVConversionModeForResolution() SDL_ConvertPixels() converts between all supported RGB and YUV formats, with SSE acceleration for converting from planar YUV formats (YV12, NV12, etc) to common RGB/RGBA formats. Added a new test program, testyuv, to verify correctness and speed of YUV conversion functionality.
2c5724ef	2017-11-04T21:58:48	Updated version to 2.0.8 since SDL_image depends on it
bcdf8b91	2017-11-04T17:35:03	Added SDL_fmod() and SDL_fmodf()
34502143	2017-11-04T15:34:14	Added float versions of SDL's math functions
f658a737	2017-10-15T21:07:01	Fixed bug 3882 - cmake fix for osx Ozkan Sezer In my cross-build environment with cmake-2.8.12.1, cmake does not add SDL_coreaudio.m to its makefiles and the result is a failure. The fix is simple: set the language to C for it as it is done at other places in CMakeLists.txt.
9c580e14	2017-10-12T13:44:28	Added functions to query and set the SDL memory allocation functions: SDL_GetMemoryFunctions() SDL_SetMemoryFunctions() SDL_GetNumAllocations()
f4cd68a5	2017-10-12T08:47:02	Fixed bug 3866 - CMake error when trying to make the 'uninstall' target when it already exists Steve Robinson In my project, the 'uninstall' target is already created by the glew library. I get this error when SDL2 tries to create it: CMake Error at _build/3rdparty/SDL2/SDL2-2.0.6/CMakeLists.txt:1816 (add_custom_target): add_custom_target cannot create target "uninstall" because another target with the same name already exists. The existing target is a custom target created in source directory "D:/Code/sdl2-tutorial/_build/3rdparty/glew/glew-2.1.0/build/cmake". See documentation for policy CMP0002 for more details. To fix it, go to the bottom of the SDL2 CMakeLists.txt file. Add an if statement to check for the existence of the target before creating it. The end result looks like this: if(NOT TARGET uninstall) configure_file( "${CMAKE_CURRENT_SOURCE_DIR}/cmake_uninstall.cmake.in" "${CMAKE_CURRENT_BINARY_DIR}/cmake_uninstall.cmake" IMMEDIATE @ONLY) add_custom_target(uninstall COMMAND ${CMAKE_COMMAND} -P ${CMAKE_CURRENT_BINARY_DIR}/cmake_uninstall.cmake) endif() This is how the glew library deals with this possibility in their CMakeLists.txt file.
0ce23a54	2017-10-12T08:08:04	Updated version to 2.0.7
827e9850	2017-10-06T16:42:43	Fixed bug 3862 - Install is broken when adding SDL2 to an existing CMake project Steve Robinson In my existing CMake project, I use add_subdirectory to add the source for SDL2. This worked fine in 2.0.5, but now in 2.0.6 when I build the INSTALL CMake target, I get this error: file INSTALL cannot find "D:/path/to/SDL2Config.cmake". Call Stack (most recent call first): 3rdparty/SDL2/cmake_install.cmake:32 (include) 3rdparty/cmake_install.cmake:36 (include) cmake_install.cmake:32 (include) To fix this, I changed line 1770 from this: ${CMAKE_SOURCE_DIR}/SDL2Config.cmake To this: ${CMAKE_CURRENT_SOURCE_DIR}/SDL2Config.cmake
260db92c	2017-09-22T16:33:34	Added stub Steam Controller sources to Android and iOS command line builds
2cdb9674	2017-09-10T10:25:36	Fixed the include path for khronos with Visual Studio
f465f24d	2017-09-09T08:36:37	Fixed bug 3760 - RWops doesn't check for integer overflow when stdio_fseek only supports 32 bits Simon Hug When RWops seeks with fseek or fseeko it uses the types long or off_t which can be 32 bits on some platforms. stdio_seek does not check if the 64-bit integer for the offset fits into a 32-bit integer. Offsets equal or larger than 2 GiB will have implementation-defined behavior and failure states would be very confusing to debug. The attached patch adds range checking by using the macros from limits.h for long type and some bit shifting for off_t because POSIX couldn't be bothered to specify min and max macros. It also defines HAVE_FSEEKI64 in SDL_config_windows.h so that the Windows function gets picked up automatically with the default config. And there's an additional error message for when ftell fails.
347fe704	2017-08-30T14:25:01	Fixed bug 3789 - Android : small clean up Sylvain Since https://hg.libsdl.org/SDL/rev/6546daa45a02 SDL_android_main.c is empty and then produce a warning nativeInit does not exist and dont need to be mark undefined
e53c5c5c	2017-08-30T00:40:06	Fix QNX build - prioritize system EGL headers over the Khronos ones
92bf6085	2017-08-29T22:04:43	Fixed bug 3616 - SDL_GL_CreateContext fails with SDL_GL_CONTEXT_DEBUG_FLAG and ANGLE/GLES 2.0 Colin Barrett Using the pre-built x86 devel libs from here: https://www.libsdl.org/release/SDL2-devel-2.0.5-VC.zip If I have: SDL_GL_SetAttribute(SDL_GL_CONTEXT_PROFILE_MASK, SDL_GL_CONTEXT_PROFILE_ES); SDL_GL_SetAttribute(SDL_GL_CONTEXT_MAJOR_VERSION, 2); SDL_GL_SetAttribute(SDL_GL_CONTEXT_MINOR_VERSION, 0); SDL_GL_SetAttribute(SDL_GL_CONTEXT_FLAGS, SDL_GL_CONTEXT_DEBUG_FLAG); and I'm using ANGLE/(a GL driver that doesn't provide an ES2 context) such that SDL_EGL_CreateContext is called by SDL_GL_CreateContext, I get the error "Could not create EGL context (context attributes are not supported)" and no context is created. Looking at the code in SDL_EGL_CreateContext - if gl_config.flags is non-zero, it looks like the code in the section guarded with "#ifdef EGL_KHR_create_context" should be executed - but it apparently isn't. Is it possible this section hasn't been compiled into the pre-built libraries? If I build SDL2.dll myself using the Visual C++ solution (VS2015 Community Update 3) then the call succeeds as I expect
c0530bcd	2017-08-28T22:42:41	We removed QuartzCore link dependency in commit 5be6badaf7e1
ce2b1644	2017-08-28T00:11:38	Be clear that disabling Vulkan surface support disables the entire SDL Vulkan integration
ea91908e	2017-08-27T23:39:38	Fixed Android ABI check to match vulkan/vk_platform.h
c722e58d	2017-08-27T23:25:12	vulkan: Include a copy of vulkan.h and vk_platform.h. Now we can provide Vulkan support in the build even if the build box doesn't have a Vulkan SDK, since we dynamically link to the library anyhow.
25e3a1ec	2017-08-27T22:15:57	vulkan: Initial Vulkan support! This work was done by Jacob Lifshay and Mark Callow; I'm just merging it into revision control.
5ca01522	2017-08-26T21:17:12	Fixed bug 3774 - Cmake build fails for Android sfalexrog Android haptic code was not added to CMakeLists.txt, leading to build failures when targeting Android platform. Attached patch adds Android haptic driver to source sets and adds configuration parameter to SDL_config.h.cmake.
f807655b	2017-08-21T11:25:04	Fixed bug 3761 - Windows non-MinGW cmake build defines HAVE_WCSLCPY and HAVE_WCSLCAT Tom Seddon https://github.com/SDL-mirror/SDL/commit/0f0ad62237fabb58d5811fe6fa59e5e5aa0e2fb5 (git head at the time of writing); Visual Studio 2015, toolset v140, Platform 10.0.14393.0, building for x64 Windows non-MinGW cmake build sets defines implying wcslcpy and wcslcat are available, but Windows doesn't have these functions. Ryan C. Gordon That's weird, these are the exact two functions that Emscripten incorrectly believed it had until we upgraded the buildbot's emsdk install. Not sure what's up with this, but it's possibly not a MingW-specific thing!
a78c20ae	2017-08-21T11:17:38	configury: check mmdeviceapi.h and audioclient.h before enabling wasapi.

5b65e0af

2020-05-15T21:12:23

Fixed bug 5100 - compilation CMake Android armeabi-v7a (Thanks Steve Robinson!) fatal error: 'cpu-features.h' file not found on CMake Android armeabi-v7a

eadc8693

2020-05-11T14:31:04

Fixed bug 5103 - Port fcitx support to both fcitx 4 & 5 wengxt Due to the new major fcitx version is coming close, the existing code need to be ported to use new Fcitx dbus interface. The new dbus interface is supported by both fcitx 4 and 5, and has a good side effect, which is that it will work with flatpak for free. Also the patch remove the dependency on fcitx header. Instead, it just hardcodes a few enum value in the code so need to handle the different header for fcitx4 or 5.

fa23e3d0

2020-05-04T02:27:29

locale: Implemented SDL_GetPreferredLocales(). This was something I proposed a long time ago, Sylvain Becker did additional work on it, then back to me. Fixes Bugzilla #2131.

7ac82710

2020-04-24T02:06:53

cmake: various Haiku settings were accidentally under "if(SDL_VIDEO)"

952bac7c

2020-04-13T15:22:09

cmake: use check_symbol_exists, not check_function_exists (thanks, Manuel!) This fixes the problem where we think iOS has fseeko64, etc, but doesn't. Fixes Bugzilla #4885.

abcc6706

2020-04-12T13:24:36

build: Don't duplicate Libs in Libs.private in pkg-config file pkg-config already prepends Libs to Libs.private when you specify --static so there's no need to duplicate them. Most other projects don't do this.

99f87a71

2020-04-11T23:38:34

build: Merge pkg-config Libs.private into Libs for static-only builds A project being built entirely statically will call pkg-config with --static, which utilises the Libs.private field. Conversely it will not use --static when not being built entirely statically, even if there is only a static build of SDL available. This will most likely cause the build to fail due to underlinking unless we merge the Libs fields. This is what the Meson build system does when it generates pkg-config files. This also also follows the behaviour of sdl2-config. At the same time, the runtime linker flags are not applicable to static-only builds so only add them for shared builds.

d292f6bd

2020-04-10T12:17:14

stdlib: Add SDL_trunc and SDL_truncf

3180ba81

2020-04-08T08:34:27

First pass at Windows sensor implementation

2be75c6a

2020-03-13T19:08:45

Fixed bug 5028 - Virtual Joysticks (new joystick backend) David Ludwig I have created a new driver for SDL's Joystick and Game-Controller subsystem: a Virtual driver. This driver allows one to create a software-based joystick, which to SDL applications will look and react like a real joystick, but whose state can be set programmatically. A primary use case for this is to help enable developers to add touch-screen joysticks to their apps. The driver comes with a set of new, public APIs, with functions to attach and detach joysticks, set virtual-joystick state, and to determine if a joystick is a virtual-one. Use of virtual joysticks goes as such: 1. Attach one or more virtual joysticks by calling SDL_JoystickAttachVirtual. If successful, this returns the virtual-device's joystick-index. 2. Open the virtual joysticks (using indicies returned by SDL_JoystickAttachVirtual). 3. Call any of the SDL_JoystickSetVirtual* functions when joystick-state changes. Please note that virtual-joystick state will only get applied on the next call to SDL_JoystickUpdate, or when pumping or polling for SDL events (via SDL_PumpEvents or SDL_PollEvent). Here is a listing of the new, public APIs, at present and subject to change: ------------------------------------------------------------ /** * Attaches a new virtual joystick. * Returns the joystick's device index, or -1 if an error occurred. */ extern DECLSPEC int SDLCALL SDL_JoystickAttachVirtual(SDL_JoystickType type, int naxes, int nballs, int nbuttons, int nhats); /** * Detaches a virtual joystick * Returns 0 on success, or -1 if an error occurred. */ extern DECLSPEC int SDLCALL SDL_JoystickDetachVirtual(int device_index); /** * Indicates whether or not a virtual-joystick is at a given device index. */ extern DECLSPEC SDL_bool SDLCALL SDL_JoystickIsVirtual(int device_index); /** * Set values on an opened, virtual-joystick's controls. * Returns 0 on success, -1 on error. */ extern DECLSPEC int SDLCALL SDL_JoystickSetVirtualAxis(SDL_Joystick * joystick, int axis, Sint16 value); extern DECLSPEC int SDLCALL SDL_JoystickSetVirtualBall(SDL_Joystick * joystick, int ball, Sint16 xrel, Sint16 yrel); extern DECLSPEC int SDLCALL SDL_JoystickSetVirtualButton(SDL_Joystick * joystick, int button, Uint8 value); extern DECLSPEC int SDLCALL SDL_JoystickSetVirtualHat(SDL_Joystick * joystick, int hat, Uint8 value); ------------------------------------------------------------ Miscellaneous notes on the initial patch, which are also subject to change: 1. no test code is present in SDL, yet. This should, perhaps, change. Initial development was done with an ImGui-based app, which potentially is too thick for use in SDL-official. If tests are to be added, what kind of tests? Automated? Graphical? 2. virtual game controllers can be created by calling SDL_JoystickAttachVirtual with a joystick-type of SDL_JOYSTICK_TYPE_GAME_CONTROLLER, with naxes (num axes) set to SDL_CONTROLLER_AXIS_MAX, and with nbuttons (num buttons) set to SDL_CONTROLLER_BUTTON_MAX. When updating their state, values of type SDL_GameControllerAxis or SDL_GameControllerButton can be casted to an int and used for the control-index (in calls to SDL_JoystickSetVirtual* functions). 3. virtual joysticks' guids are mostly all-zeros with the exception of the last two bytes, the first of which is a 'v', to indicate that the guid is a virtual one, and the second of which is a SDL_JoystickType that has been converted into a Uint8. 4. virtual joysticks are ONLY turned into virtual game-controllers if and when their joystick-type is set to SDL_JOYSTICK_TYPE_GAMECONTROLLER. This is controlled by having SDL's default list of game-controllers have a single entry for a virtual game controller (of guid, "00000000000000000000000000007601", which is subject to the guid-encoding described above). 5. regarding having to call SDL_JoystickUpdate, either directly or indirectly via SDL_PumpEvents or SDL_PollEvents, before new virtual-joystick state becomes active (as specified via SDL_JoystickSetVirtual* function-calls), this was done to match behavior found in SDL's other joystick drivers, almost all of which will only update SDL-state during SDL_JoystickUpdate. 6. the initial patch is based off of SDL 2.0.12 7. the virtual joystick subsystem is disabled by default. It should be possible to enable it by building with SDL_JOYSTICK_VIRTUAL=1 Questions, comments, suggestions, or bug reports very welcome!

983bbf9e

2020-03-10T18:35:31

Backed out changeset 51622f74dc85

93ed3c8b

2020-03-10T18:25:47

Updated SDL to version 2.0.13 for development builds

4fb06a2a

2020-03-10T18:25:47

Updated SDL to version 2.0.13 for development builds

74ed2156

2020-03-01T14:58:16

Updated version to 2.0.12 for release candidate build

1d624aa5

2020-02-16T00:08:36

Further improvements for bug 4128 - CMAKE: Generated target import file contains incorrect include path Mohamed It would be useful to be able to do either `#include "SDL2/SDL.h"` or `#include "SDL.h"`. This patch allows that and adds compatibility with other build systems. It also allows differentiating between SDL1 and SDL2.

8f1a916a

2020-02-13T20:50:47

Add basic support for compiling on RISC OS

598bcfc5

2020-01-06T07:06:58

Fixed bug 4928 - CMakeLists.txt: put cmake package helpers in proper libdir Tiago O. Use LIB_SUFFIX variable to determine the correct path.

183929bd

2019-12-03T02:42:53

cmake: ${SDL_CMAKE_DEBUG_POSTFIX} needs to be wrapped in quotes. Otherwise, if it's an empty string, it causes problems. Fixes Bugzilla #4117.

0d0ec5fe

2019-11-26T20:41:00

CMakeLists.txt: sync DYLIB_CURRENT_VERSION to Xcode project

8cdb4526

2019-11-21T10:33:56

CMakeLists.txt: add several missing function checks for unix case.

65096446

2019-11-20T16:42:50

Improved XInput VID/PID detection and added SDL_wcsstr() and SDL_wcsncmp()

eb8f14bb

2019-11-20T20:40:50

added SDL_strtokr() as a replacement for POSIX strtok_r (bug #4046.)

b7df2603

2019-10-24T23:17:19

cmake: added support for enabling the ARM SIMD/NEON code.

ffc7d091

2019-10-01T14:00:02

endpointvolume.h checks not needed since changeset 13078:8ab094a9df6b .

68985371

2019-09-24T16:36:48

offscreen: Add new video driver backend Offscreen The Offscreen video driver is intended to be used for headless rendering as well as allows for multiple GPUs to be used for headless rendering Currently only supports EGL (OpenGL / ES) or Framebuffers Adds a hint to specifiy which EGL device to use: SDL_HINT_EGL_DEVICE Adds testoffscreen.c which can be used to test the backend out Disabled by default for now

6398abe5

2019-09-23T18:24:03

CMake: bug-fix for tvOS support tvOS Device support wasn't working, at least not with the current-latest tvOS release (13.0), with CMake failing during its configuration stage.

3fe2d836

2019-09-22T10:37:16

Updated SDL development builds to version 2.0.11

ec65a34b

2019-08-27T12:30:20

CMake: tvOS support/fixes To use, set the following CMake variables when running CMake's configuration stage: - CMAKE_SYSTEM_NAME=tvOS - CMAKE_OSX_SYSROOT=<SDK> (examples: appletvos, appletvsimulator, appletvos12.4, /full/path/to/AppleTVOS.sdk, etc.) - CMAKE_OSX_ARCHITECTURES=<semicolon-separated list of CPU architectures> (example: "arm64;x86_64")

b13c951c

2019-08-27T11:07:43

CMake: iOS support added When using a recent version of CMake (3.14+), this should make it possible to: - build SDL for iOS, both static and dynamic - build SDL test apps (as iOS .app bundles) - generate a working SDL_config.h for iOS (using SDL_config.h.cmake as a basis) To use, set the following CMake variables when running CMake's configuration stage: - CMAKE_SYSTEM_NAME=iOS - CMAKE_OSX_SYSROOT=<SDK> (examples: iphoneos, iphonesimulator, iphoneos12.4, /full/path/to/iPhoneOS.sdk, etc.) - CMAKE_OSX_ARCHITECTURES=<semicolon-separated list of CPU architectures> (example: "arm64;armv7s") Examples: - for Simulator, using the latest, installed SDK: cmake path/to/SDL -DCMAKE_SYSTEM_NAME=iOS -DCMAKE_OSX_SYSROOT=iphonesimulator -DCMAKE_OSX_ARCHITECTURES=x86_64 - for Device, using the latest, installed SDK, 64-bit only cmake path/to/SDL -DCMAKE_SYSTEM_NAME=iOS -DCMAKE_OSX_SYSROOT=iphoneos -DCMAKE_OSX_ARCHITECTURES=arm64 - for Device, using the latest, installed SDK, mixed 32/64 bit cmake path/to/SDL -DCMAKE_SYSTEM_NAME=iOS -DCMAKE_OSX_SYSROOT=iphoneos -DCMAKE_OSX_ARCHITECTURES="arm64;armv7s" - for Device, using a specific SDK revision (iOS 12.4, in this example): cmake path/to/SDL -DCMAKE_SYSTEM_NAME=iOS -DCMAKE_OSX_SYSROOT=iphoneos12.4 -DCMAKE_OSX_ARCHITECTURES=arm64 - for Simulator, using the latest, installed SDK, and building SDL test apps (as .app bundles): cmake path/to/SDL -DSDL_TEST=1 -DCMAKE_SYSTEM_NAME=iOS -DCMAKE_OSX_SYSROOT=iphonesimulator -DCMAKE_OSX_ARCHITECTURES=x86_64

0a9c74aa

2019-08-27T11:38:43

Fixed bug 3918 - HIDAPI, CMake support for android project

155087d1

2019-08-11T15:23:37

Fixed bug 3918 - CMake support for android project

e9ec7d41

2019-08-05T23:46:09

Fixed bug 4354 - CMake builds do not correctly enable IME on Linux Callum McGing While the CMake build checks for ibus and does enable the ibus backend with set(HAVE_IBUS_IBUS_H TRUE), this does not define SDL_USE_IME, thus CMake built SDL2 (as in Arch Linux) cannot use IME at all. The attached patch fixes this behaviour when building against ibus. IME support will still fail when only fcitx is available on the build system.

aebaa316

2019-08-05T12:35:32

Add public APIs for creating a Metal view attached to an SDL window. Add SDL_metal.h.

e149f4c4

2019-07-31T11:34:00

cmake: Fix locating libusb header at configure-time Removing the CheckUSBHID call is necessary to avoid caching the failed header check result before we find libusb via pkg-config.

f7d82e56

2019-07-31T12:20:55

hidapi: Add SDL_hidapi.c, allows support for multiple hidapi backends. This is currently supported on Linux and macOS. iOS and Android are not supported at all, Windows support could be added with some changes to the libusb backend. The Visual Studio and Xcode projects do not use this feature. Based on Valve Software's hid.cpp, written in collaboration with Andrew Eikum.

70f0b093

2019-07-12T13:40:58

cmake: Add setupapi library to Windows build dependencies (hidapi needs it). Fixes Bugzilla #4719.

66d4d8e2

2019-07-08T16:46:52

cmake: Added HIDAPI support.

7f78d0f0

2019-06-21T22:01:27

Fixed bug 4684 - GLES1 variables missing under Android with CMake Braden Obrzut https://hg.libsdl.org/SDL/file/7dc39b047055/CMakeLists.txt#l911 I believe the following should also be specified there: set(SDL_VIDEO_OPENGL_ES 1) set(SDL_VIDEO_RENDER_OGL_ES 1) As it is now GLES1 support is missing when building for Android despite it linking to the library.

67c67f3a

2019-06-17T10:13:28

Updated version to 2.0.10

1b73d578

2019-06-08T18:32:29

Temporary fix for bug 4254 - a _lot_ of strict aliasing warnings Ozkan Sezer A horde of strict aliasing violation warnings are emitted from joystick layer, and also from a few other places. This happens with gcc-4.4.7 on Linux CentOS 6.10. Some other sysjoystick would possibly have the same warnings. Attached my full log here. Example entry: src/joystick/SDL_joystick.c: In function 'SDL_GetJoystickGUIDInfo': src/joystick/SDL_joystick.c:1094: warning: dereferencing pointer '({anonymous})' does break strict-aliasing rules

59483c64

2019-06-08T14:36:03

Fixed bug 4593 - Respect CMake's BUILD_SHARED_LIBS default behavior tschwinger Respect the BUILD_SHARED_LIBS variable when defined, and build either shared or static libs, which is CMake's default behavior (See https://cmake.org/cmake/help/latest/variable/BUILD_SHARED_LIBS.html). If the variable is not defined, the current behavior remains unchanged and both variants are built where the platform supports it. This way, it remains possible to build both in one shot, which seems convenient for distro builds and useful to promote some consistency between them.

68bb8d6c

2019-06-08T14:34:38

Fixed bug 4594 - Fix install location of CMake targets on Apple platforms tschwinger Followup to #3651 As already noted by Ryan, no framework is being built, so we better install to lib/cmake. That code was originally part of a patch submitted by David Demelier, whose credit BTW got lost (I combined his patch for #3572 with fixes for #2576 and #3613 resulting in #3651 because things started to depend on another). I tested that the configuration files are found correctly in the new location on MacOS X based on a hint to the root (see https://cmake.org/cmake/help/latest/command/find_package.html#search-procedure).

50aab198

2019-05-21T17:33:31

Fixed bug 4639 - CMake build does not generate libhidapi.so for Android Manuel Sabogal I noticed that the current Android.mk builds a libhidapi.so library for Android but the CMake build hasn't been updated to do so. I'll attach a patch that fixes this issue.

f79190f4

2019-04-23T07:59:31

Use _Exit() when available

af4bbb30

2019-03-25T23:01:32

configure.in: Rename to configure.ac to fix an 'aclocal' warning Also rename references in related files.

8a5a05c1

2019-03-15T15:51:05

events: Let arbitrary signals to simulate iOS/Android backgrounding events. This lets you build a custom embedded device that roughly offers the "this process is going to the background NOW" semantics of SDL on a mobile device.

510b01f5

2018-12-03T20:14:35

Fix WORKING_DIR parameter

d4a21f54

2018-12-02T02:43:32

cmake: Comment out some debug logging that can upset build environments. Something about the dashes, colons, numbers makes some builders believe this is an error message.

bc57ac27

2018-11-02T21:34:17

mir: Removed mir client support. Fixes Bugzilla #4288.

04761d7d

2018-10-25T11:11:02

CMakeLists.txt: set dylib version numbers properly. (bug #2915.)

c17d6299

2018-09-28T21:19:27

Mark a subsystem as dummy, not disabled, if it was intended to be compiled in. From Tom Black: I'm having problems initializing the sensor module. I'm compiling with a standard ./configure && make && sudo make install, and the module says it's enabled, but SDL_Init(SDL_INIT_EVERYTHING) is failing with SDL_GetError() returning "SDL not built with sensor support".

14d2ec80

2018-09-28T21:03:39

commit 8f4dedc039190f5e734c47dcc4fc021b5793b659 Author: Micha? Janiszewski <janisozaur+signed@gmail.com> Date: Fri Sep 28 20:38:04 2018 +0200 CMake: fix building tests on Linux In case where libunwind.h has been found, it will be used by compiler, but linker wasn't updated to reflect use of this new library.

b11c75e9

2018-09-28T13:41:04

configury, cmake: add check for endpointvolume.h : add HAVE_ENDPOINTVOLUME_H, HAVE_MMDEVICEAPI_H and HAVE_AUDIOCLIENT_H in SDL_config.h.in, SDL_config.h.cmake, SDL_config_windows.h, and in SDL_config_winrt.h.

cf7460e4

2018-09-28T11:30:50

configury, cmake: make wasapi option independent of directx.

bc6c1997

2018-09-26T10:08:14

Updated version to 2.0.9

8aaef4b9

2018-09-24T08:41:59

Fixed bug 3166 - It would be nice, if SDL would support including SDL project as a subdirectory into another CMake project Wayde Reitsma After attempting to use SDL2 in the way described in this bug, I found the main issue was the includes not being added to the compiler command. I found the issue was that the target_include_directories commands for the SDL2, SDL2-static and SDL2main targets only sets the public includes for installations using the INSTALL_INTERFACE generator expression. I have written a patch to CMakeLists.txt that fixes this issue by adding another item to the target_include_directories commands, utilizing the BUILD_INTERFACE generator expression to correctly add the include directory during builds.

c19516b5

2018-09-18T11:49:42

cmake: correctly report Vulkan support at configure time (thanks, Tiago!). Fixes Bugzilla #4262.

9753b9cc

2018-09-02T23:57:06

CMakeLists.txt: fix typo SDL_SENSORS_DISABLED -> SDL_SENSOR_DISABLED

df5d565f

2018-08-23T14:32:30

cmake: add sensor subsystem to the build.

7c3040e0

2018-08-21T12:11:34

First pass on the new SDL sensor API

58021b38

2018-08-18T17:23:40

Correct the name of the SDL shared library in CMake for Mac OS

b4fe7412

2018-08-04T11:52:46

SDL_exp

4d4bb2b0

2018-08-02T16:21:43

cmake: use WINDOWS instead of WIN32.

88577916

2018-07-01T17:01:04

make WASAPI configurable in autofoo and cmake (default is on.) closes bug #3798.

3a11bba2

2018-06-29T18:29:17

Remove "lib" prefix from DLL file on MinGW builds closes bug #4209.

5e8c8167

2018-04-15T09:37:51

Fixed bug 4135 - Broken symlink libSDL2.so since rev11940 Tiago O. Symlink points to the wrong folder, and target will always have debug postfix, so it'll be broken for other build types.

9856d967

2018-04-11T06:16:23

Fix the include path in the installed CMake target import file Previously the include path was {INSTALL_PREFIX}/include, it is now {INSTALL_PREFIX}/include/SDL2 to be consistent with the other build and package configuration systems. Fixes #4128.

6b5ed0fd

2018-04-10T08:03:54

Added debug postfix to install command and fixed library path

0a5c1065

2018-03-10T21:16:14

Fix ARM builds with MSVC

5cbb90da

2018-02-25T19:22:47

cmake: Set debug library name suffix per target instead of setting it globally. Don't add a suffix on android

6cf4d0e4

2018-02-24T08:59:58

Fixed bug 4092 - CMake support for building everything in the "test" directory Eric Wasylishen Patch to support building the tests with cmake. Disabled by default, use: "cmake .. -DSDL_TEST=YES" to enable the tests. Tested on macOS 10.13 with the ninja, makefile, and Xcode generators, and Windows 10 with the Visual Studio 2017 generator.

c329381f

2018-02-07T14:03:24

Description: fix installation of shared library for Android Author: Boris Pek <tehnick-8@yandex.ru> Last-Update: 2018-01-10

11c348b4

2018-01-17T11:53:09

SDL_log10

f1ec8a5f

2017-12-11T12:00:12

Check for immintrin.h before using it in SDL_cpuinfo.h

351d6d47

2017-12-06T12:24:32

audio: Port WASAPI to WinRT, remove XAudio2 backend. XAudio2 doesn't have capture support, so WASAPI was to replace it; the holdout was WinRT, which still needed it as its primary audio target until the WASAPI code code be made to work. The support matrix now looks like: WinXP: directsound by default, winmm as a fallback for buggy drivers. Vista+: WASAPI (directsound and winmm as fallbacks for debugging). WinRT: WASAPI

57ebc727

2017-12-04T20:35:01

Fixed bug 3975 - Add GLES2 support for macOS via ANGLE library Andrey Seems latest google angle library successfully built & tested under macOS'es. https://github.com/google/angle We need to use GLES2 to implement true cross-platform code.

a4b33d74

2017-11-20T00:03:23

Fixed bug 3959 - cmake build broken by commit 11702 (7fdbffd47c0e) due to typo Mate Nagy There is a typo in CMakeLists.txt that makes CMake exit with failure. Change that causes the problem: (Notice the double ending brackets) ${SDL2_SOURCE_DIR}/src/video/*.c) + ${SDL2_SOURCE_DIR}/src/video/yuv2rgb/*.c) Fix: Just remove the first ending bracket resulting in: ${SDL2_SOURCE_DIR}/src/video/*.c ${SDL2_SOURCE_DIR}/src/video/yuv2rgb/*.c)

a6a4e27a

2017-11-12T22:51:12

Updated SDL's YUV support, many thanks to Adrien Descamps New functions get and set the YUV colorspace conversion mode: SDL_SetYUVConversionMode() SDL_GetYUVConversionMode() SDL_GetYUVConversionModeForResolution() SDL_ConvertPixels() converts between all supported RGB and YUV formats, with SSE acceleration for converting from planar YUV formats (YV12, NV12, etc) to common RGB/RGBA formats. Added a new test program, testyuv, to verify correctness and speed of YUV conversion functionality.

2c5724ef

2017-11-04T21:58:48

Updated version to 2.0.8 since SDL_image depends on it

bcdf8b91

2017-11-04T17:35:03

Added SDL_fmod() and SDL_fmodf()

34502143

2017-11-04T15:34:14

Added float versions of SDL's math functions

f658a737

2017-10-15T21:07:01

Fixed bug 3882 - cmake fix for osx Ozkan Sezer In my cross-build environment with cmake-2.8.12.1, cmake does not add SDL_coreaudio.m to its makefiles and the result is a failure. The fix is simple: set the language to C for it as it is done at other places in CMakeLists.txt.

9c580e14

2017-10-12T13:44:28

Added functions to query and set the SDL memory allocation functions: SDL_GetMemoryFunctions() SDL_SetMemoryFunctions() SDL_GetNumAllocations()

f4cd68a5

2017-10-12T08:47:02

Fixed bug 3866 - CMake error when trying to make the 'uninstall' target when it already exists Steve Robinson In my project, the 'uninstall' target is already created by the glew library. I get this error when SDL2 tries to create it: CMake Error at _build/3rdparty/SDL2/SDL2-2.0.6/CMakeLists.txt:1816 (add_custom_target): add_custom_target cannot create target "uninstall" because another target with the same name already exists. The existing target is a custom target created in source directory "D:/Code/sdl2-tutorial/_build/3rdparty/glew/glew-2.1.0/build/cmake". See documentation for policy CMP0002 for more details. To fix it, go to the bottom of the SDL2 CMakeLists.txt file. Add an if statement to check for the existence of the target before creating it. The end result looks like this: if(NOT TARGET uninstall) configure_file( "${CMAKE_CURRENT_SOURCE_DIR}/cmake_uninstall.cmake.in" "${CMAKE_CURRENT_BINARY_DIR}/cmake_uninstall.cmake" IMMEDIATE @ONLY) add_custom_target(uninstall COMMAND ${CMAKE_COMMAND} -P ${CMAKE_CURRENT_BINARY_DIR}/cmake_uninstall.cmake) endif() This is how the glew library deals with this possibility in their CMakeLists.txt file.

0ce23a54

2017-10-12T08:08:04

Updated version to 2.0.7

827e9850

2017-10-06T16:42:43

Fixed bug 3862 - Install is broken when adding SDL2 to an existing CMake project Steve Robinson In my existing CMake project, I use add_subdirectory to add the source for SDL2. This worked fine in 2.0.5, but now in 2.0.6 when I build the INSTALL CMake target, I get this error: file INSTALL cannot find "D:/path/to/SDL2Config.cmake". Call Stack (most recent call first): 3rdparty/SDL2/cmake_install.cmake:32 (include) 3rdparty/cmake_install.cmake:36 (include) cmake_install.cmake:32 (include) To fix this, I changed line 1770 from this: ${CMAKE_SOURCE_DIR}/SDL2Config.cmake To this: ${CMAKE_CURRENT_SOURCE_DIR}/SDL2Config.cmake

260db92c

2017-09-22T16:33:34

Added stub Steam Controller sources to Android and iOS command line builds

2cdb9674

2017-09-10T10:25:36

Fixed the include path for khronos with Visual Studio

f465f24d

2017-09-09T08:36:37

Fixed bug 3760 - RWops doesn't check for integer overflow when stdio_fseek only supports 32 bits Simon Hug When RWops seeks with fseek or fseeko it uses the types long or off_t which can be 32 bits on some platforms. stdio_seek does not check if the 64-bit integer for the offset fits into a 32-bit integer. Offsets equal or larger than 2 GiB will have implementation-defined behavior and failure states would be very confusing to debug. The attached patch adds range checking by using the macros from limits.h for long type and some bit shifting for off_t because POSIX couldn't be bothered to specify min and max macros. It also defines HAVE_FSEEKI64 in SDL_config_windows.h so that the Windows function gets picked up automatically with the default config. And there's an additional error message for when ftell fails.

347fe704

2017-08-30T14:25:01

Fixed bug 3789 - Android : small clean up Sylvain Since https://hg.libsdl.org/SDL/rev/6546daa45a02 SDL_android_main.c is empty and then produce a warning nativeInit does not exist and dont need to be mark undefined

e53c5c5c

2017-08-30T00:40:06

Fix QNX build - prioritize system EGL headers over the Khronos ones

92bf6085

2017-08-29T22:04:43

Fixed bug 3616 - SDL_GL_CreateContext fails with SDL_GL_CONTEXT_DEBUG_FLAG and ANGLE/GLES 2.0 Colin Barrett Using the pre-built x86 devel libs from here: https://www.libsdl.org/release/SDL2-devel-2.0.5-VC.zip If I have: SDL_GL_SetAttribute(SDL_GL_CONTEXT_PROFILE_MASK, SDL_GL_CONTEXT_PROFILE_ES); SDL_GL_SetAttribute(SDL_GL_CONTEXT_MAJOR_VERSION, 2); SDL_GL_SetAttribute(SDL_GL_CONTEXT_MINOR_VERSION, 0); SDL_GL_SetAttribute(SDL_GL_CONTEXT_FLAGS, SDL_GL_CONTEXT_DEBUG_FLAG); and I'm using ANGLE/(a GL driver that doesn't provide an ES2 context) such that SDL_EGL_CreateContext is called by SDL_GL_CreateContext, I get the error "Could not create EGL context (context attributes are not supported)" and no context is created. Looking at the code in SDL_EGL_CreateContext - if gl_config.flags is non-zero, it looks like the code in the section guarded with "#ifdef EGL_KHR_create_context" should be executed - but it apparently isn't. Is it possible this section hasn't been compiled into the pre-built libraries? If I build SDL2.dll myself using the Visual C++ solution (VS2015 Community Update 3) then the call succeeds as I expect

c0530bcd

2017-08-28T22:42:41

We removed QuartzCore link dependency in commit 5be6badaf7e1

ce2b1644

2017-08-28T00:11:38

Be clear that disabling Vulkan surface support disables the entire SDL Vulkan integration

ea91908e

2017-08-27T23:39:38

Fixed Android ABI check to match vulkan/vk_platform.h

c722e58d

2017-08-27T23:25:12

vulkan: Include a copy of vulkan.h and vk_platform.h. Now we can provide Vulkan support in the build even if the build box doesn't have a Vulkan SDK, since we dynamically link to the library anyhow.

25e3a1ec

2017-08-27T22:15:57

vulkan: Initial Vulkan support! This work was done by Jacob Lifshay and Mark Callow; I'm just merging it into revision control.

5ca01522

2017-08-26T21:17:12

Fixed bug 3774 - Cmake build fails for Android sfalexrog Android haptic code was not added to CMakeLists.txt, leading to build failures when targeting Android platform. Attached patch adds Android haptic driver to source sets and adds configuration parameter to SDL_config.h.cmake.

f807655b

2017-08-21T11:25:04

Fixed bug 3761 - Windows non-MinGW cmake build defines HAVE_WCSLCPY and HAVE_WCSLCAT Tom Seddon https://github.com/SDL-mirror/SDL/commit/0f0ad62237fabb58d5811fe6fa59e5e5aa0e2fb5 (git head at the time of writing); Visual Studio 2015, toolset v140, Platform 10.0.14393.0, building for x64 Windows non-MinGW cmake build sets defines implying wcslcpy and wcslcat are available, but Windows doesn't have these functions. Ryan C. Gordon That's weird, these are the exact two functions that Emscripten incorrectly believed it had until we upgraded the buildbot's emsdk install. Not sure what's up with this, but it's possibly not a MingW-specific thing!

a78c20ae

2017-08-21T11:17:38

configury: check mmdeviceapi.h and audioclient.h before enabling wasapi.

kc3-lang/SDL/CMakeLists.txt

CMakeLists.txt

Log