kmx git

Commit	Date	Message
f142a796	2017-08-14T13:37:14	Fixed bug 2441 - SDL_DuplicateSurface Rainer Deyke I've written a small patch that adds a small SDL_DuplicateSurface function to SDL. I've written the function as part of a larger (as yet unfinished) patch, but I think this function is useful enough that it merits inclusion in SDL on its own.
7bab2913	2017-08-12T17:01:14	Fixed Windows build
05facb3d	2017-08-12T16:59:00	Fixed bug 2979 - SDL_ConvertSurface does not convert color keys consistently Edmund Horner When a 16-bit "565 format" surface has a colour key set, it will blit with correct transparency. If, however, it has its colour key set then is converted to a 32-bit ARGB format surface, the colour key in the converted image will not necessarily be the same pixel value as the transparent pixels. It may not blit correctly, because the colour key does not match the right pixels. In my case, with an image using 0xB54A for transparency, the colour key was converted to 180,170,82; but the corresponding pixels (with the same original value) were converted to 180,169,82. Blitting the converted image did not use transparency where expected. I have attached a test case. The bug has been replicated on both x86_64 Linux (SDL 2.0.2), and 32-bit MS C++ 2010 on Windows (SDL 2.0.0).
1a544145	2017-08-12T15:21:26	Fixed bug 3309 - SDL_ConvertSurface adds AlphaMod when input surface has ColorKey Sylvain Let's you have a SDL_Surface that has ColorKey, but no Alpha Modulation. When this surface is duplicated with SDL_ConvertSurface function, the result has ColorKey and Alpha Modulation (BLEND, and Opaque 255). I think SDL_ConvertSurface should strictly keeps the input format. example ======= SDL_Surface input; // ... Set up a surface with ColorKey and no AlphaMod SDL_Surface output = SDL_ConvertSurface(input, input->format, input->flags); // "output" surface has a ColorKey but also AlphaMod (BLEND, and Opaque 255).
45b774e3	2017-01-01T18:33:28	Updated copyright for 2017
4905cd9c	2016-11-30T22:06:05	Fixed bug 3340 - SDL_BlitScaled causes access violation in some cases. Simon Hug The SDL_BlitScaled function runs into an access violation for specific blit coordinates and surface sizes. The attached testcase blits a 800x600 surface to a 1280x720 surface at the coordinates -640,-345 scaled to 1280x720. The blit function that moves the data then runs over and reads after the pixel data from the src surface causing an access violation. I can't say where exactly it goes wrong, but I think it could have something to do with the rounding in SDL_UpperBlitScaled. final_src.y is 288 and final_src.h is 313. Together that's 601, which I believe is one too much, but I just don't know the code enough to make sure that's the problem. Sylvain I think this patch fix the issue, but maybe it's worth re-writing "SDL_UpperBlitScaled" using SDL_FRect.
d2676c29	2016-10-07T17:04:58	Fixed bug 2924 - SDL_CreateRGBSurface[From] versions that take SDL_PIXELFORMAT enum Daniel Gibson Currently, SDL_CreateRGBSurface() and SDL_CreateRGBSurfaceFrom() take Uint32 masks for RGBA to "describe" the Pixelformat of the surface. Internally those value are only used to map to one of the SDL_PIXELFORMAT_* enum values that are used for further processing. I think it would be both handy and more efficient to be able to specify SDL_PIXELFORMAT_* yourself without using SDL_PixelFormatEnumToMasks() to create masks first, so I implemented functions that do that: SDL_CreateRGBSurfaceWithFormat() and SDL_CreateRGBSurfaceWithFormatFrom() which are like the versions without "WithFormat" but instead of taking 4 Uint32s for R/G/B/A masks, they take one for a SDL_PIXELFORMAT_* enum value. Together with https://bugzilla.libsdl.org/show_bug.cgi?id=2923 creating a SDL_Surface* from RGBA data (e.g. from stb_image) is as easy as surf = SDL_SDL_CreateRGBSurfaceWithFormat(0, w, h, bppToUse*8, SDL_PIXELFORMAT_RGBA32);
42065e78	2016-01-02T10:10:34	Updated copyright to 2016
0e45984f	2015-06-21T17:33:46	Fixed crash if initialization of EGL failed but was tried again later. The internal function SDL_EGL_LoadLibrary() did not delete and remove a mostly uninitialized data structure if loading the library first failed. A later try to use EGL then skipped initialization and assumed it was previously successful because the data structure now already existed. This led to at least one crash in the internal function SDL_EGL_ChooseConfig() because a NULL pointer was dereferenced to make a call to eglBindAPI().
2c4a6ea0	2015-05-26T06:27:46	Updated the copyright year to 2015
b72938c8	2015-04-20T12:22:44	Windows: Always set the system timer resolution to 1ms by default. An existing hint lets apps that don't need the timer resolution changed avoid this, to save battery, etc, but this fixes several problems in timing, audio callbacks not firing fast enough, etc. Fixes Bugzilla #2944.
fe6c797c	2015-04-10T23:30:31	Fixed an iOS view orientation issue when SDL_GL_CreateContext or SDL_CreateRenderer is called.
b88ca1b4	2015-02-10T16:28:56	the last parameter of XChangeProperty is the number of elements.. and when the element format is 32.. the element is "long" so we have 5 long elements here. Yes this seems confusing as on mac+linux Long is either 32 or 64bits depending on the architecture, but this is how the X11 protocol is defined. Thus 5 is the correct value for the nelts here. Not 5 or 10 depending on the architecture. More info on the confusion https://bugs.freedesktop.org/show_bug.cgi?id=16802
b48e54aa	2015-01-26T22:00:29	Fixed bug 2802 - [patch] Fix android build compiling in wrong filesystem implementation Jonas Kulla The configure script didn't differentiate between Linux and Android, unconditionally compiling in the unix implementation of SDL_sysfilesystem.c. I'm probably one of the very few people building SDL for android using classic configure + standalone toolchain, so this has gone undetected all along.
a830fbc7	2014-12-06T00:17:52	Fixed warnings about possible loss of data in conversion.
70438be2	2014-12-03T10:55:23	WinRT: fixed bug whereby SDL would override an app's default orientation WinRT apps can set a default, preferred orientation via a .appxmanifest file. SDL was overriding this on app startup, and making the app use all possible orientations (landscape and portrait). Thanks to Eric Wing for the heads up on this!
9c398852	2014-11-22T22:20:40	Corrected header file documentation comment.
24c86b55	2014-09-11T19:24:42	[X11] Reconcile logical keyboard state with physical state on FocusIn since the window system doesn't do it for us like other platforms. This prevents sticky keys and missed keys when going in and out of focus, for example Alt would appear to stick if switching away from an SDL app with Alt-Tab and had to be pressed again. CR: Sam
1ea86978	2014-08-17T13:11:55	Removed SDL_round() because the license wasn't compatible with zlib
8272ed18	2014-08-16T23:25:02	Fixed bug 2687 - SDL_BlitScaled does not handle clipping correctly Patch from Benoit Pierre: video: fix clipping handling in SDL_UpperBlitScaled - honor destination clipping rectangle - update both destination and source rectangles when clipping source rectangle to source surface and destination rectangle to destination clip rectangle - don't change scaling factors when clipping N.B.: - when no scaling is involved (source and destination width/height are the same), SDL_UpperBlit is used (so SDL_BlitScaled behaves like SDL_BlitSurface) - the final destination rectangle after all clipping is performed is saved back to dstrect (like for SDL_UpperBlit)
6fef39d6	2014-08-06T11:34:54	Added NV12 and NV21 texture support for OpenGL and OpenGL ES 2.0 renderers
0c8e3376	2014-07-07T21:21:05	Fixed bug 2628 - invalidate surface->map in SDL_SurfacePalette() Wei Mingzhi surface->map should be invalidated in SDL_SetSurfacePalette(), otherwise the palette would not be effective when blitting to another non-8bit surface which we previously blitted to.
3dcb451f	2014-04-09T21:29:19	Added a README file regarding WinRT support To note, this file is currently formatted with CRLF line endings, rather than LF, to allow the file to be viewed with Notepad.
58edac3e	2014-02-02T00:53:27	Fixed bug 2374 - Update copyright for 2014... Is it that time already??
f848adff	2013-11-29T10:06:08	Improve Android pause/resume behavior.
7e1289af	2013-11-24T23:56:17	Make internal SDL sources include SDL_internal.h instead of SDL_config.h The new header will include SDL_config.h, but allows for other global stuff.
08fa8da7	2013-10-20T21:56:15	Fixed bug 2129 - fix for bug 2121 breaks linking for mingw and throws multiple warnings Andreas Ertelt The problem in question is caused by changeset 7771 (http://hg.libsdl.org/SDL/rev/5486e579872e / https://bugzilla.libsdl.org/show_bug.cgi?id=2121) The redefinition of __inline__ (introduced by the addition of begin_code.h:128's "\|\| __STRICT_ANSI__") results in mingw's gcc throwing multiple warning: always_inline function might not be inlinable [-Wattributes] as well as a whole bunch of redefinitions of mingw internals which break linking of projects including the SDL2 headers.
379c0054	2013-10-18T00:47:22	Fixed bug 2123 - SDL_BlitScaled crashes in src/video/SDL_blit_N.c:2145 We need to reset the blit function when switching between scaled and unscaled blits.
b63d11ce	2013-09-04T23:40:11	The SDL_PixelFormat* passed to SDL_ConvertSurface() should be const.
f79fc33a	2013-08-29T08:29:21	Christoph Mallon: Remove pointless if (x) before SDL_free(x)
1e49b1ed	2013-08-21T09:47:10	OCD fixes: Adds a space after /* (glory to regular expressions!)
695344d1	2013-08-21T09:43:09	OCD fixes: Adds a space before */
dad42067	2013-08-12T11:13:50	Fixes #2022, do not resume on Android when surfaceChanged If the app is in landscape mode and the user presses the power button, a pause is followed immediately by a surfaceChanged event because the lock screen is shown in portrait mode. This triggers a "false" resume. So, we just pause and resume following the onWindowFocusChanged events. Also, wait for SDL_APP_WILLENTERBACKGROUND and SDL_APP_DIDENTERBACKGROUND before blocking the event pump.
1ad936eb	2013-08-11T19:56:43	Fixed bug 2027 - Full-screen appears to be broken - hang in SDL_DestroyWindow() Rainer Deyke I'm running Linux Mint 15 with the Cinnamon window manager. SDL_DestroyWindow consistently locks up for me when the window if fullscreen.

f142a796

2017-08-14T13:37:14

Fixed bug 2441 - SDL_DuplicateSurface Rainer Deyke I've written a small patch that adds a small SDL_DuplicateSurface function to SDL. I've written the function as part of a larger (as yet unfinished) patch, but I think this function is useful enough that it merits inclusion in SDL on its own.

7bab2913

2017-08-12T17:01:14

Fixed Windows build

05facb3d

2017-08-12T16:59:00

Fixed bug 2979 - SDL_ConvertSurface does not convert color keys consistently Edmund Horner When a 16-bit "565 format" surface has a colour key set, it will blit with correct transparency. If, however, it has its colour key set then is converted to a 32-bit ARGB format surface, the colour key in the converted image will not necessarily be the same pixel value as the transparent pixels. It may not blit correctly, because the colour key does not match the right pixels. In my case, with an image using 0xB54A for transparency, the colour key was converted to 180,170,82; but the corresponding pixels (with the same original value) were converted to 180,169,82. Blitting the converted image did not use transparency where expected. I have attached a test case. The bug has been replicated on both x86_64 Linux (SDL 2.0.2), and 32-bit MS C++ 2010 on Windows (SDL 2.0.0).

1a544145

2017-08-12T15:21:26

Fixed bug 3309 - SDL_ConvertSurface adds AlphaMod when input surface has ColorKey Sylvain Let's you have a SDL_Surface that has ColorKey, but no Alpha Modulation. When this surface is duplicated with SDL_ConvertSurface function, the result has ColorKey and Alpha Modulation (BLEND, and Opaque 255). I think SDL_ConvertSurface should strictly keeps the input format. example ======= SDL_Surface *input; // ... Set up a surface with ColorKey and no AlphaMod SDL_Surface *output = SDL_ConvertSurface(input, input->format, input->flags); // "output" surface has a ColorKey but *also* AlphaMod (BLEND, and Opaque 255).

45b774e3

2017-01-01T18:33:28

Updated copyright for 2017

4905cd9c

2016-11-30T22:06:05

Fixed bug 3340 - SDL_BlitScaled causes access violation in some cases. Simon Hug The SDL_BlitScaled function runs into an access violation for specific blit coordinates and surface sizes. The attached testcase blits a 800x600 surface to a 1280x720 surface at the coordinates -640,-345 scaled to 1280x720. The blit function that moves the data then runs over and reads after the pixel data from the src surface causing an access violation. I can't say where exactly it goes wrong, but I think it could have something to do with the rounding in SDL_UpperBlitScaled. final_src.y is 288 and final_src.h is 313. Together that's 601, which I believe is one too much, but I just don't know the code enough to make sure that's the problem. Sylvain I think this patch fix the issue, but maybe it's worth re-writing "SDL_UpperBlitScaled" using SDL_FRect.

d2676c29

2016-10-07T17:04:58

Fixed bug 2924 - SDL_CreateRGBSurface[From] versions that take SDL_PIXELFORMAT enum Daniel Gibson Currently, SDL_CreateRGBSurface() and SDL_CreateRGBSurfaceFrom() take Uint32 masks for RGBA to "describe" the Pixelformat of the surface. Internally those value are only used to map to one of the SDL_PIXELFORMAT_* enum values that are used for further processing. I think it would be both handy and more efficient to be able to specify SDL_PIXELFORMAT_* yourself without using SDL_PixelFormatEnumToMasks() to create masks first, so I implemented functions that do that: SDL_CreateRGBSurfaceWithFormat() and SDL_CreateRGBSurfaceWithFormatFrom() which are like the versions without "WithFormat" but instead of taking 4 Uint32s for R/G/B/A masks, they take one for a SDL_PIXELFORMAT_* enum value. Together with https://bugzilla.libsdl.org/show_bug.cgi?id=2923 creating a SDL_Surface* from RGBA data (e.g. from stb_image) is as easy as surf = SDL_SDL_CreateRGBSurfaceWithFormat(0, w, h, bppToUse*8, SDL_PIXELFORMAT_RGBA32);

42065e78

2016-01-02T10:10:34

Updated copyright to 2016

0e45984f

2015-06-21T17:33:46

Fixed crash if initialization of EGL failed but was tried again later. The internal function SDL_EGL_LoadLibrary() did not delete and remove a mostly uninitialized data structure if loading the library first failed. A later try to use EGL then skipped initialization and assumed it was previously successful because the data structure now already existed. This led to at least one crash in the internal function SDL_EGL_ChooseConfig() because a NULL pointer was dereferenced to make a call to eglBindAPI().

2c4a6ea0

2015-05-26T06:27:46

Updated the copyright year to 2015

b72938c8

2015-04-20T12:22:44

Windows: Always set the system timer resolution to 1ms by default. An existing hint lets apps that don't need the timer resolution changed avoid this, to save battery, etc, but this fixes several problems in timing, audio callbacks not firing fast enough, etc. Fixes Bugzilla #2944.

fe6c797c

2015-04-10T23:30:31

Fixed an iOS view orientation issue when SDL_GL_CreateContext or SDL_CreateRenderer is called.

b88ca1b4

2015-02-10T16:28:56

the last parameter of XChangeProperty is the number of elements.. and when the element format is 32.. the element is "long" so we have 5 long elements here. Yes this seems confusing as on mac+linux Long is either 32 or 64bits depending on the architecture, but this is how the X11 protocol is defined. Thus 5 is the correct value for the nelts here. Not 5 or 10 depending on the architecture. More info on the confusion https://bugs.freedesktop.org/show_bug.cgi?id=16802

b48e54aa

2015-01-26T22:00:29

Fixed bug 2802 - [patch] Fix android build compiling in wrong filesystem implementation Jonas Kulla The configure script didn't differentiate between Linux and Android, unconditionally compiling in the unix implementation of SDL_sysfilesystem.c. I'm probably one of the very few people building SDL for android using classic configure + standalone toolchain, so this has gone undetected all along.

a830fbc7

2014-12-06T00:17:52

Fixed warnings about possible loss of data in conversion.

70438be2

2014-12-03T10:55:23

WinRT: fixed bug whereby SDL would override an app's default orientation WinRT apps can set a default, preferred orientation via a .appxmanifest file. SDL was overriding this on app startup, and making the app use all possible orientations (landscape and portrait). Thanks to Eric Wing for the heads up on this!

9c398852

2014-11-22T22:20:40

Corrected header file documentation comment.

24c86b55

2014-09-11T19:24:42

[X11] Reconcile logical keyboard state with physical state on FocusIn since the window system doesn't do it for us like other platforms. This prevents sticky keys and missed keys when going in and out of focus, for example Alt would appear to stick if switching away from an SDL app with Alt-Tab and had to be pressed again. CR: Sam

1ea86978

2014-08-17T13:11:55

Removed SDL_round() because the license wasn't compatible with zlib

8272ed18

2014-08-16T23:25:02

Fixed bug 2687 - SDL_BlitScaled does not handle clipping correctly Patch from Benoit Pierre: video: fix clipping handling in SDL_UpperBlitScaled - honor destination clipping rectangle - update both destination and source rectangles when clipping source rectangle to source surface and destination rectangle to destination clip rectangle - don't change scaling factors when clipping N.B.: - when no scaling is involved (source and destination width/height are the same), SDL_UpperBlit is used (so SDL_BlitScaled behaves like SDL_BlitSurface) - the final destination rectangle after all clipping is performed is saved back to dstrect (like for SDL_UpperBlit)

6fef39d6

2014-08-06T11:34:54

Added NV12 and NV21 texture support for OpenGL and OpenGL ES 2.0 renderers

0c8e3376

2014-07-07T21:21:05

Fixed bug 2628 - invalidate surface->map in SDL_SurfacePalette() Wei Mingzhi surface->map should be invalidated in SDL_SetSurfacePalette(), otherwise the palette would not be effective when blitting to another non-8bit surface which we previously blitted to.

3dcb451f

2014-04-09T21:29:19

Added a README file regarding WinRT support To note, this file is currently formatted with CRLF line endings, rather than LF, to allow the file to be viewed with Notepad.

58edac3e

2014-02-02T00:53:27

f848adff

2013-11-29T10:06:08

Improve Android pause/resume behavior.

7e1289af

2013-11-24T23:56:17

Make internal SDL sources include SDL_internal.h instead of SDL_config.h The new header will include SDL_config.h, but allows for other global stuff.

08fa8da7

2013-10-20T21:56:15

Fixed bug 2129 - fix for bug 2121 breaks linking for mingw and throws multiple warnings Andreas Ertelt The problem in question is caused by changeset 7771 (http://hg.libsdl.org/SDL/rev/5486e579872e / https://bugzilla.libsdl.org/show_bug.cgi?id=2121) The redefinition of __inline__ (introduced by the addition of begin_code.h:128's "|| __STRICT_ANSI__") results in mingw's gcc throwing multiple warning: always_inline function might not be inlinable [-Wattributes] as well as a whole bunch of redefinitions of mingw internals which break linking of projects including the SDL2 headers.

379c0054

2013-10-18T00:47:22

Fixed bug 2123 - SDL_BlitScaled crashes in src/video/SDL_blit_N.c:2145 We need to reset the blit function when switching between scaled and unscaled blits.

b63d11ce

2013-09-04T23:40:11

The SDL_PixelFormat* passed to SDL_ConvertSurface() should be const.

f79fc33a

2013-08-29T08:29:21

Christoph Mallon: Remove pointless if (x) before SDL_free(x)

1e49b1ed

2013-08-21T09:47:10

OCD fixes: Adds a space after /* (glory to regular expressions!)

695344d1

2013-08-21T09:43:09

OCD fixes: Adds a space before */

dad42067

2013-08-12T11:13:50

Fixes #2022, do not resume on Android when surfaceChanged If the app is in landscape mode and the user presses the power button, a pause is followed immediately by a surfaceChanged event because the lock screen is shown in portrait mode. This triggers a "false" resume. So, we just pause and resume following the onWindowFocusChanged events. Also, wait for SDL_APP_WILLENTERBACKGROUND and SDL_APP_DIDENTERBACKGROUND before blocking the event pump.

1ad936eb

2013-08-11T19:56:43

Fixed bug 2027 - Full-screen appears to be broken - hang in SDL_DestroyWindow() Rainer Deyke I'm running Linux Mint 15 with the Cinnamon window manager. SDL_DestroyWindow consistently locks up for me when the window if fullscreen.

kc3-lang/SDL/src/video/SDL_surface.c

src/video/SDL_surface.c

Log