kmx git

Commit	Date	Message
11c348b4	2018-01-17T11:53:09	SDL_log10
e3cc5b2c	2018-01-03T10:03:25	Updated copyright for 2018
f1ec8a5f	2017-12-11T12:00:12	Check for immintrin.h before using it in SDL_cpuinfo.h
351d6d47	2017-12-06T12:24:32	audio: Port WASAPI to WinRT, remove XAudio2 backend. XAudio2 doesn't have capture support, so WASAPI was to replace it; the holdout was WinRT, which still needed it as its primary audio target until the WASAPI code code be made to work. The support matrix now looks like: WinXP: directsound by default, winmm as a fallback for buggy drivers. Vista+: WASAPI (directsound and winmm as fallbacks for debugging). WinRT: WASAPI
bcdf8b91	2017-11-04T17:35:03	Added SDL_fmod() and SDL_fmodf()
34502143	2017-11-04T15:34:14	Added float versions of SDL's math functions
7abef33c	2017-11-04T09:00:40	Android configure-based build fixes (thanks Vit!)
9c580e14	2017-10-12T13:44:28	Added functions to query and set the SDL memory allocation functions: SDL_GetMemoryFunctions() SDL_SetMemoryFunctions() SDL_GetNumAllocations()
f465f24d	2017-09-09T08:36:37	Fixed bug 3760 - RWops doesn't check for integer overflow when stdio_fseek only supports 32 bits Simon Hug When RWops seeks with fseek or fseeko it uses the types long or off_t which can be 32 bits on some platforms. stdio_seek does not check if the 64-bit integer for the offset fits into a 32-bit integer. Offsets equal or larger than 2 GiB will have implementation-defined behavior and failure states would be very confusing to debug. The attached patch adds range checking by using the macros from limits.h for long type and some bit shifting for off_t because POSIX couldn't be bothered to specify min and max macros. It also defines HAVE_FSEEKI64 in SDL_config_windows.h so that the Windows function gets picked up automatically with the default config. And there's an additional error message for when ftell fails.
28bf56c1	2017-09-06T10:31:05	Fixed bug 3801 - HAVE_LIBSAMPLERATE_H depending on HAVE_LIBC in current SDL_config.h.in Ozkan Sezer HAVE_LIBSAMPLERATE_H is depending on HAVE_LIBC in current config.h.in: it shouldn't be. HAVE_LIBUDEV_H, HAVE_DBUS_DBUS_H, HAVE_IBUS_IBUS_H, HAVE_FCITX_FRONTEND_H, and HAVE_ALTIVEC_H have the same situation too. I suggest something like the following, which moves them out of the HAVE_LIBC confinement and also moves the windows dx header stuff along side them. (Not ideal, but a bit cleaner I think.)
d51dc737	2017-09-06T01:14:23	Fixed bug 3797 - configure check for float.h Ozkan Sezer Cmake checks for float.h, but configure does not: the attached patch adds float.h to checked headers in configury, and it adds the missing HAVE_FLOAT_H macro to SDL_config.h.cmake and SDL_config.h.in. In SDL_config_macosx.h and SDL_config_windows.h, defined HAVE_FLOAT_H as 1, where I know that it's true.
ce2b1644	2017-08-28T00:11:38	Be clear that disabling Vulkan surface support disables the entire SDL Vulkan integration
25e3a1ec	2017-08-27T22:15:57	vulkan: Initial Vulkan support! This work was done by Jacob Lifshay and Mark Callow; I'm just merging it into revision control.
bcf0e071	2017-08-18T17:29:44	Added WASAPI audio target to autoconf build process
fb835f9e	2017-08-14T20:22:19	Fixed bug 2330 - Debian bug report: SDL2 X11 driver buffer overflow with large X11 file descriptor manuel.montezelo Original bug report (note that it was against 2.0.0, it might have been fixed in between): http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=733015 -------------------------------------------------------- Package: libsdl2-2.0-0 Version: 2.0.0+dfsg1-3 Severity: normal Tags: patch I have occasional crashes here caused by the X11 backend of SDL2. It seems to be caused by the X11_Pending function trying to add a high number (> 1024) file descriptor to a fd_set before doing a select on it to avoid busy waiting on X11 events. This causes a buffer overflow because the file descriptor is larger (or equal) than the limit FD_SETSIZE. Attached is a possible workaround patch. Please also keep in mind that fd_set are also used in following files which may have similar problems. src/audio/bsd/SDL_bsdaudio.c src/audio/paudio/SDL_paudio.c src/audio/qsa/SDL_qsa_audio.c src/audio/sun/SDL_sunaudio.c src/joystick/linux/SDL_sysjoystick.c -------------------------------------------------------- On Tuesday 24 December 2013 00:43:13 Sven Eckelmann wrote: > I have occasional crashes here caused by the X11 backend of SDL2. It seems > to be caused by the X11_Pending function trying to add a high number (> > 1024) file descriptor to a fd_set before doing a select on it to avoid busy > waiting on X11 events. This causes a buffer overflow because the file > descriptor is larger (or equal) than the limit FD_SETSIZE. I personally experienced this problem while hacking on the python bindings package for SDL2 [1] (while doing make runtest). But it easier to reproduce in a smaller, synthetic testcase.
f8de064c	2017-08-13T22:26:44	Added wchar.h to fix build on some platforms with new wcs* functions
f1829d95	2017-08-13T20:37:49	Added SDL_wcscmp()
a48c9e6d	2017-08-11T21:16:33	Fixed bug 3292 - SDL_rwops and 64-bit file I/O Juha Niemim? On AmigaOS 4 platform with Newlib 'C' library, there is a problem with failing fseeko64. This seemed to be caused by using fopen instead of fopen64.
56363ebf	2017-08-02T10:22:48	Fixed bug 3690 - SDL2 KMS/DRM render context support Manuel The attached patch adds support for KMS/DRM context graphics. It builds with no problem on X86_64 GNU/Linux systems, provided the needed libraries are present, and on ARM GNU/Linux systems that have KMS/DRM support and a GLES2 implementation. Tested on Raspberry Pi: KMS/DRM is what the Raspberry Pi will use as default in the near future, once the propietary DispmanX API by Broadcom is overtaken by open graphics stack, it's possible to boot current Raspbian system in KMS mode by adding "dtoverlay=vc4-kms-v3d" to config.txt on Raspbian's boot partition. X86 systems use KMS right away in every current GNU/Linux system. Simple build instructions: $./autogen.sh $./configure --enable-video-kmsdrm $make
3c09265d	2017-07-10T18:31:28	Fixed bug 3609 - Windows build fails due to conflicting types for 'XINPUT_GAMEPAD_EX' Ozkan Sezer (In reply to Ryan C. Gordon from comment #9) > I've put this patch in as https://hg.libsdl.org/SDL/rev/7213ae46e870 ...can > you verify this works on the latest MinGW? > > Thanks, > --ryan. This patch is wrong: the structure in question has nothing to do with any gcc version in use. I suggest reverting this adding a conigury check for it, instead. Something like the following should do it: (configure needs regenerating.)
22241ed0	2017-07-01T17:50:47	Support for QNX 7.0 (thanks, Elad!). Fixes Bugzilla #3686.
d9039f23	2017-06-08T13:27:58	jack: Initial shot at a JACK audio target. http://jackaudio.org/ Fixes Bugzilla #2163. (with several more commits following to improve this code.)
a7fc2822	2017-05-24T19:56:59	audio: rename bsd target to netbsd. Apparently this is no longer a generic BSD audio target, and hasn't been for years, so rename it for NetBSD.
df25258a	2017-01-06T20:43:53	Added configure and cmake support for libsamplerate
45b774e3	2017-01-01T18:33:28	Updated copyright for 2017
1e8f074c	2016-11-29T05:34:20	Avoid conflicts with multiple versions of udev by first trying the library that is linked with the executable, if any, and then picking the one that is in the build environment. This fixes joystick detection for applications using the Steam Linux Runtime
36156335	2016-11-20T21:34:54	Renaming of guard header names to quiet -Wreserved-id-macro Patch contributed by Sylvain
35430a73	2016-11-17T01:15:16	cpuinfo: first attempt at SDL_HasNEON() implementation.
9a8642bd	2016-11-01T10:30:46	Fixed bug 3478 - Patch Haiku to use dlopen instead of load_add_on Kai Sterker SDL2 on Haiku so far uses Haiku-specific APIs for loading dynamic objects as add-ons, instead of using dlopen to load them as libraries. This, for example, leads to SDL_mixer not being able to load its audio backends, when compiled with standard settings. As discussed at https://www.freelists.org/post/haikuports/SDL2-mixer-ogg-music-not-playing-and-other-stuff,2 , the best way to deal with this would be using dlopen instead of load_add_on. The following patch implements this change by dropping the Haiku-specific bits and using dlopen instead.
808c75d1	2016-10-07T18:57:40	Fixed bug 2824 - Add Fcitx Input Method Support Weitian Leung Just moved ibus direct call to SDL_IME_* related functions, and adds fcitx IME support (uses DBus, too), enable with env: SDL_IM_MODULE=fcitx (ibus still the default one)
2a2c8d42	2016-04-21T03:16:44	Initial shot at a renderer target for Apple's Metal API. This isn't complete, but is enough to run testsprite2. It's currently Mac-only; with a little work to figure out how to properly glue in a Metal layer to a UIView, this will likely work on iOS, too. This is only wired up to the configure script right now, and disabled by default. CMake and Xcode still need their bits filled in as appropriate.
42065e78	2016-01-02T10:10:34	Updated copyright to 2016
0e45984f	2015-06-21T17:33:46	Fixed crash if initialization of EGL failed but was tried again later. The internal function SDL_EGL_LoadLibrary() did not delete and remove a mostly uninitialized data structure if loading the library first failed. A later try to use EGL then skipped initialization and assumed it was previously successful because the data structure now already existed. This led to at least one crash in the internal function SDL_EGL_ChooseConfig() because a NULL pointer was dereferenced to make a call to eglBindAPI().
e3f4ca0d	2015-06-08T01:13:51	configure/cmake/x11: Removed SDL_VIDEO_DRIVER_X11_CONST_PARAM_XDATA32 test. This was the only thing that made SDL_config.h generate differently between 32 and 64-bit versions of Linux, so instead we force a function cast in our X11 code to match our dynamic loader version, which removes the compile error on some machines that prompted this test in the first place. Xlib never wrote to this data, so if you're on an older Xlib where this param wasn't const, your data should still be intact when we force the caller to think it was actually const after all. Fixes Bugzilla #1893.
2a757825	2015-05-28T00:30:21	X11: Add Xdbe support to message boxes (thanks, Melker!). Without this, message boxes with a lot of text will noticibly flicker as you mouse over buttons. Fixes Bugzilla #2343.
2c4a6ea0	2015-05-26T06:27:46	Updated the copyright year to 2015
b72938c8	2015-04-20T12:22:44	Windows: Always set the system timer resolution to 1ms by default. An existing hint lets apps that don't need the timer resolution changed avoid this, to save battery, etc, but this fixes several problems in timing, audio callbacks not firing fast enough, etc. Fixes Bugzilla #2944.
fe6c797c	2015-04-10T23:30:31	Fixed an iOS view orientation issue when SDL_GL_CreateContext or SDL_CreateRenderer is called.
b88ca1b4	2015-02-10T16:28:56	the last parameter of XChangeProperty is the number of elements.. and when the element format is 32.. the element is "long" so we have 5 long elements here. Yes this seems confusing as on mac+linux Long is either 32 or 64bits depending on the architecture, but this is how the X11 protocol is defined. Thus 5 is the correct value for the nelts here. Not 5 or 10 depending on the architecture. More info on the confusion https://bugs.freedesktop.org/show_bug.cgi?id=16802
b48e54aa	2015-01-26T22:00:29	Fixed bug 2802 - [patch] Fix android build compiling in wrong filesystem implementation Jonas Kulla The configure script didn't differentiate between Linux and Android, unconditionally compiling in the unix implementation of SDL_sysfilesystem.c. I'm probably one of the very few people building SDL for android using classic configure + standalone toolchain, so this has gone undetected all along.
fe40a172	2014-12-18T00:19:52	Initial merge of Emscripten port! With this commit, you can compile SDL2 with Emscripten ( http://emscripten.org/ ), and make your SDL-based C/C++ program into a web app. This port was due to the efforts of several people, including: Charlie Birks, Sathyanarayanan Gunasekaran, Jukka Jyl?nki, Alon Zakai, Edward Rudd, Bruce Mitchener, and Martin Gerhardy. (Thanks, everyone!)
70438be2	2014-12-03T10:55:23	WinRT: fixed bug whereby SDL would override an app's default orientation WinRT apps can set a default, preferred orientation via a .appxmanifest file. SDL was overriding this on app startup, and making the app use all possible orientations (landscape and portrait). Thanks to Eric Wing for the heads up on this!
9c398852	2014-11-22T22:20:40	Corrected header file documentation comment.
251ca855	2014-10-15T09:18:17	Expanded the iMX6 video driver into a general Vivante video driver that works across multiple SoCs
24c86b55	2014-09-11T19:24:42	[X11] Reconcile logical keyboard state with physical state on FocusIn since the window system doesn't do it for us like other platforms. This prevents sticky keys and missed keys when going in and out of focus, for example Alt would appear to stick if switching away from an SDL app with Alt-Tab and had to be pressed again. CR: Sam
50cc4efe	2014-09-10T08:54:01	Freescale i.MX6 video driver --- CMakeLists.txt \| 2 + cmake/sdlchecks.cmake \| 20 +++ configure \| 51 +++++++ configure.in \| 28 ++++ include/SDL_config.h.cmake \| 1 + include/SDL_config.h.in \| 1 + src/video/SDL_sysvideo.h \| 3 + src/video/SDL_video.c \| 3 + src/video/mx6/SDL_mx6events.c \| 45 ++++++ src/video/mx6/SDL_mx6events_c.h \| 31 +++++ src/video/mx6/SDL_mx6opengles.c \| 211 ++++++++++++++++++++++++++++ src/video/mx6/SDL_mx6opengles.h \| 68 +++++++++ src/video/mx6/SDL_mx6video.c \| 301 ++++++++++++++++++++++++++++++++++++++++ src/video/mx6/SDL_mx6video.h \| 78 +++++++++++ 14 files changed, 843 insertions(+) create mode 100644 src/video/mx6/SDL_mx6events.c create mode 100644 src/video/mx6/SDL_mx6events_c.h create mode 100644 src/video/mx6/SDL_mx6opengles.c create mode 100644 src/video/mx6/SDL_mx6opengles.h create mode 100644 src/video/mx6/SDL_mx6video.c create mode 100644 src/video/mx6/SDL_mx6video.h
1ea86978	2014-08-17T13:11:55	Removed SDL_round() because the license wasn't compatible with zlib
4e7db78e	2014-08-16T23:23:15	Added SDL_round(), contributed by Benoit Pierre - thanks!
8077bf3d	2014-07-07T21:27:42	Fixed bug 2618 - incomplete pthread-based lock support should be removed binarycrusader Since changeset 358696c354a8, SDL 2.0 has been broken on Solaris when compiling with the Solaris Studio compiler (which uses the pthread implementation of SDL_AtomicLock). Notably, it gets stuck at the MemoryBarrierRelease in SDL_GetErrBuf: 6585 # 218 6586 if (!tls_errbuf && !tls_being_created) { 6587 SDL_AtomicLock_REAL ( & tls_lock ); 6588 if (!tls_errbuf) { 6589 SDL_TLSID slot; 6590 tls_being_created = SDL_TRUE; 6591 slot = SDL_TLSCreate_REAL ( ); 6592 tls_being_created = SDL_FALSE; 6593 { SDL_SpinLock _tmp = 0 ; SDL_AtomicLock_REAL ( & _tmp ) ; SDL_AtomicUnlock_REAL ( & _tmp ) ; }; ^^^ loops forever above 6594 tls_errbuf = slot; 6595 } 6596 SDL_AtomicUnlock_REAL ( & tls_lock ); 6597 } Running: testthread (process id 28926) ^Cdbx: warning: Interrupt ignored but forwarded to child. signal INT (Interrupt) in __nanosleep at 0xfe52a875 0xfe52a875: __nanosleep+0x0015: jae __nanosleep+0x23 [ 0xfe52a883, .+0xe ] Current function is SDL_Delay_REAL 204 was_error = nanosleep(&tv, &elapsed); (dbx) where [1] __nanosleep(0xfeffe848, 0xfeffe850, 0xfe75a5ac, 0xfe5169d8), at 0xfe52a875 [2] nanosleep(0xfeffe848, 0xfeffe850), at 0xfe516a3b =>[3] SDL_Delay_REAL(ms = 0), line 204 in "SDL_systimer.c" [4] SDL_AtomicLock_REAL(lock = 0xfeffe88c), line 104 in "SDL_spinlock.c" [5] SDL_GetErrBuf(), line 225 in "SDL_thread.c" [6] SDL_ClearError_REAL(), line 216 in "SDL_error.c" [7] SDL_InitSubSystem_REAL(flags = 0), line 116 in "SDL.c" [8] SDL_Init_REAL(flags = 0), line 244 in "SDL.c" [9] SDL_Init(a = 0), line 89 in "SDL_dynapi_procs.h" [10] main(argc = 1, argv = 0xfeffe948), line 65 in "testthread.c" As far as I can tell, this is because pthread_spin_trylock() always returns EBUSY for this particular lock; since it works in other places, I'm suspicious. Different Solaris Studio compiler versions seem to make no difference. I've verified this is broken on Linux as well if SDL_spinlock.c is modified to use the pthread implementation. This appears to be because pthread_spin_init() and pthread_spin_destroy() are not used with the locks as required.
b79e7f32	2014-07-03T15:39:55	Split the XInput and DirectInput code so Windows RT can use the existing XInput support.
41a39837	2014-06-18T20:11:39	Add IBus IME Support, move DBus code to its own file. (v3.3 squashed)
efa2d058	2014-06-08T18:18:13	Fixes audio for Native Client, and other fixes... - SDL_NaClMount, SDL_NaClUmount - Default mounting of https at / in SDL's main function - More documentation in README-nacl.txt
6101e4b2	2014-06-07T18:20:01	Added SDL_sqrtf(), SDL_tan(), SDL_tanf()
1e352d79	2014-06-06T15:45:59	Chrome's Native Client backend implementation
2a7aa9bd	2014-05-06T00:13:07	Fix build on Windows targets without dxgi.h, like MingW32.
3dcb451f	2014-04-09T21:29:19	Added a README file regarding WinRT support To note, this file is currently formatted with CRLF line endings, rather than LF, to allow the file to be viewed with Notepad.
9eccde51	2014-04-06T00:30:48	Enable building of Android libraries using a standalone NDK
1a35f32b	2014-03-10T01:51:03	Converted David Ludwig's D3D11 renderer to C and optimized it. The D3D11 renderer is now slightly faster than D3D9 on my Windows 8 machine (testsprite2 runs at 3400 FPS vs 3100 FPS) This will need tweaking to fix the Windows RT build.
89fd0faf	2014-02-03T11:52:54	Hooked up dynamic loading for Mir.
19f8c622	2014-02-02T23:41:46	Added Mir video target (thanks, Brandon!).
58edac3e	2014-02-02T00:53:27	Fixed bug 2374 - Update copyright for 2014... Is it that time already??
272ebb8e	2014-01-09T13:56:21	Dynamic loading support for Wayland
fce6257c	2013-12-27T09:29:39	Implements touch support on QTWayland. Contributed by Thomas Perl.
ec1cb49e	2013-12-14T20:18:43	Wayland support Based on the original port to Wayland by: Joel Teichroeb, Benjamin Franzke, Scott Moreau, et al. Additional changes in this commit, done by me: * Wayland uses the common EGL framework * EGL can now create a desktop OpenGL context * testgl2 loads GL functions dynamically, no need to link to libGL anymore * Assorted fixes to the Wayland backend Tested on the Weston Compositor (v1.0.5) that ships with Ubuntu 13.10, running Weston under X. Tests ran: testrendercopyex (all backends), testgl2, testgles2,testintersections
d01ad02b	2013-12-09T15:17:20	Hook up SDL_acos and SDL_asin properly.
f848adff	2013-11-29T10:06:08	Improve Android pause/resume behavior.
e7693740	2013-11-24T23:35:38	Added SDL_vsscanf().
00003e8c	2013-11-14T11:51:24	Renamed things named after BeOS to be named after Haiku instead.
7550ddcc	2013-11-13T22:35:26	Started BeOS removal: merged BeOS thread and pthread code. Haiku uses most of the standard pthread API, with a few #ifdefs where we still need to fallback onto the old BeOS APIs. BeOS, however, does not support pthreads (or maybe doesn't support it well), so I'm unplugging support for the platform with this changeset. Be Inc went out of business in 2001.
b39a4daf	2013-10-03T10:28:10	SDL_TEXTINPUT support for EVDEV
9ceed73d	2013-09-28T13:28:19	Raspberry Pi support (also unified UDEV and EVDEV support)
f77c2372	2013-08-22T13:00:05	Added SDL_VIDEO_OPENGL_ES2 to the SDL_config.h templates (Thanks, Kerim!).
2dd7091e	2013-08-20T19:57:11	Added SDL_GetBasePath() and SDL_GetPrefPath() in new filesystem module.
0eeb76d8	2013-08-19T16:29:46	Fixes bug #2037, common EGL code for Android and X11
dad42067	2013-08-12T11:13:50	Fixes #2022, do not resume on Android when surfaceChanged If the app is in landscape mode and the user presses the power button, a pause is followed immediately by a surfaceChanged event because the lock screen is shown in portrait mode. This triggers a "false" resume. So, we just pause and resume following the onWindowFocusChanged events. Also, wait for SDL_APP_WILLENTERBACKGROUND and SDL_APP_DIDENTERBACKGROUND before blocking the event pump.
1ad936eb	2013-08-11T19:56:43	Fixed bug 2027 - Full-screen appears to be broken - hang in SDL_DestroyWindow() Rainer Deyke I'm running Linux Mint 15 with the Cinnamon window manager. SDL_DestroyWindow consistently locks up for me when the window if fullscreen.

11c348b4

2018-01-17T11:53:09

SDL_log10

e3cc5b2c

2018-01-03T10:03:25

Updated copyright for 2018

f1ec8a5f

2017-12-11T12:00:12

Check for immintrin.h before using it in SDL_cpuinfo.h

351d6d47

2017-12-06T12:24:32

audio: Port WASAPI to WinRT, remove XAudio2 backend. XAudio2 doesn't have capture support, so WASAPI was to replace it; the holdout was WinRT, which still needed it as its primary audio target until the WASAPI code code be made to work. The support matrix now looks like: WinXP: directsound by default, winmm as a fallback for buggy drivers. Vista+: WASAPI (directsound and winmm as fallbacks for debugging). WinRT: WASAPI

bcdf8b91

2017-11-04T17:35:03

Added SDL_fmod() and SDL_fmodf()

34502143

2017-11-04T15:34:14

Added float versions of SDL's math functions

7abef33c

2017-11-04T09:00:40

Android configure-based build fixes (thanks Vit!)

9c580e14

2017-10-12T13:44:28

Added functions to query and set the SDL memory allocation functions: SDL_GetMemoryFunctions() SDL_SetMemoryFunctions() SDL_GetNumAllocations()

f465f24d

2017-09-09T08:36:37

Fixed bug 3760 - RWops doesn't check for integer overflow when stdio_fseek only supports 32 bits Simon Hug When RWops seeks with fseek or fseeko it uses the types long or off_t which can be 32 bits on some platforms. stdio_seek does not check if the 64-bit integer for the offset fits into a 32-bit integer. Offsets equal or larger than 2 GiB will have implementation-defined behavior and failure states would be very confusing to debug. The attached patch adds range checking by using the macros from limits.h for long type and some bit shifting for off_t because POSIX couldn't be bothered to specify min and max macros. It also defines HAVE_FSEEKI64 in SDL_config_windows.h so that the Windows function gets picked up automatically with the default config. And there's an additional error message for when ftell fails.

28bf56c1

2017-09-06T10:31:05

Fixed bug 3801 - HAVE_LIBSAMPLERATE_H depending on HAVE_LIBC in current SDL_config.h.in Ozkan Sezer HAVE_LIBSAMPLERATE_H is depending on HAVE_LIBC in current config.h.in: it shouldn't be. HAVE_LIBUDEV_H, HAVE_DBUS_DBUS_H, HAVE_IBUS_IBUS_H, HAVE_FCITX_FRONTEND_H, and HAVE_ALTIVEC_H have the same situation too. I suggest something like the following, which moves them out of the HAVE_LIBC confinement and also moves the windows dx header stuff along side them. (Not ideal, but a bit cleaner I think.)

d51dc737

2017-09-06T01:14:23

Fixed bug 3797 - configure check for float.h Ozkan Sezer Cmake checks for float.h, but configure does not: the attached patch adds float.h to checked headers in configury, and it adds the missing HAVE_FLOAT_H macro to SDL_config.h.cmake and SDL_config.h.in. In SDL_config_macosx.h and SDL_config_windows.h, defined HAVE_FLOAT_H as 1, where I know that it's true.

ce2b1644

2017-08-28T00:11:38

Be clear that disabling Vulkan surface support disables the entire SDL Vulkan integration

25e3a1ec

2017-08-27T22:15:57

vulkan: Initial Vulkan support! This work was done by Jacob Lifshay and Mark Callow; I'm just merging it into revision control.

bcf0e071

2017-08-18T17:29:44

Added WASAPI audio target to autoconf build process

fb835f9e

2017-08-14T20:22:19

Fixed bug 2330 - Debian bug report: SDL2 X11 driver buffer overflow with large X11 file descriptor manuel.montezelo Original bug report (note that it was against 2.0.0, it might have been fixed in between): http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=733015 -------------------------------------------------------- Package: libsdl2-2.0-0 Version: 2.0.0+dfsg1-3 Severity: normal Tags: patch I have occasional crashes here caused by the X11 backend of SDL2. It seems to be caused by the X11_Pending function trying to add a high number (> 1024) file descriptor to a fd_set before doing a select on it to avoid busy waiting on X11 events. This causes a buffer overflow because the file descriptor is larger (or equal) than the limit FD_SETSIZE. Attached is a possible workaround patch. Please also keep in mind that fd_set are also used in following files which may have similar problems. src/audio/bsd/SDL_bsdaudio.c src/audio/paudio/SDL_paudio.c src/audio/qsa/SDL_qsa_audio.c src/audio/sun/SDL_sunaudio.c src/joystick/linux/SDL_sysjoystick.c -------------------------------------------------------- On Tuesday 24 December 2013 00:43:13 Sven Eckelmann wrote: > I have occasional crashes here caused by the X11 backend of SDL2. It seems > to be caused by the X11_Pending function trying to add a high number (> > 1024) file descriptor to a fd_set before doing a select on it to avoid busy > waiting on X11 events. This causes a buffer overflow because the file > descriptor is larger (or equal) than the limit FD_SETSIZE. I personally experienced this problem while hacking on the python bindings package for SDL2 [1] (while doing make runtest). But it easier to reproduce in a smaller, synthetic testcase.

f8de064c

2017-08-13T22:26:44

Added wchar.h to fix build on some platforms with new wcs* functions

f1829d95

2017-08-13T20:37:49

Added SDL_wcscmp()

a48c9e6d

2017-08-11T21:16:33

Fixed bug 3292 - SDL_rwops and 64-bit file I/O Juha Niemim? On AmigaOS 4 platform with Newlib 'C' library, there is a problem with failing fseeko64. This seemed to be caused by using fopen instead of fopen64.

56363ebf

2017-08-02T10:22:48

Fixed bug 3690 - SDL2 KMS/DRM render context support Manuel The attached patch adds support for KMS/DRM context graphics. It builds with no problem on X86_64 GNU/Linux systems, provided the needed libraries are present, and on ARM GNU/Linux systems that have KMS/DRM support and a GLES2 implementation. Tested on Raspberry Pi: KMS/DRM is what the Raspberry Pi will use as default in the near future, once the propietary DispmanX API by Broadcom is overtaken by open graphics stack, it's possible to boot current Raspbian system in KMS mode by adding "dtoverlay=vc4-kms-v3d" to config.txt on Raspbian's boot partition. X86 systems use KMS right away in every current GNU/Linux system. Simple build instructions: $./autogen.sh $./configure --enable-video-kmsdrm $make

3c09265d

2017-07-10T18:31:28

Fixed bug 3609 - Windows build fails due to conflicting types for 'XINPUT_GAMEPAD_EX' Ozkan Sezer (In reply to Ryan C. Gordon from comment #9) > I've put this patch in as https://hg.libsdl.org/SDL/rev/7213ae46e870 ...can > you verify this works on the latest MinGW? > > Thanks, > --ryan. This patch is wrong: the structure in question has nothing to do with any gcc version in use. I suggest reverting this adding a conigury check for it, instead. Something like the following should do it: (configure needs regenerating.)

22241ed0

2017-07-01T17:50:47

Support for QNX 7.0 (thanks, Elad!). Fixes Bugzilla #3686.

d9039f23

2017-06-08T13:27:58

jack: Initial shot at a JACK audio target. http://jackaudio.org/ Fixes Bugzilla #2163. (with several more commits following to improve this code.)

a7fc2822

2017-05-24T19:56:59

audio: rename bsd target to netbsd. Apparently this is no longer a generic BSD audio target, and hasn't been for years, so rename it for NetBSD.

df25258a

2017-01-06T20:43:53

Added configure and cmake support for libsamplerate

45b774e3

2017-01-01T18:33:28

Updated copyright for 2017

1e8f074c

2016-11-29T05:34:20

Avoid conflicts with multiple versions of udev by first trying the library that is linked with the executable, if any, and then picking the one that is in the build environment. This fixes joystick detection for applications using the Steam Linux Runtime

36156335

2016-11-20T21:34:54

Renaming of guard header names to quiet -Wreserved-id-macro Patch contributed by Sylvain

35430a73

2016-11-17T01:15:16

cpuinfo: first attempt at SDL_HasNEON() implementation.

9a8642bd

2016-11-01T10:30:46

Fixed bug 3478 - Patch Haiku to use dlopen instead of load_add_on Kai Sterker SDL2 on Haiku so far uses Haiku-specific APIs for loading dynamic objects as add-ons, instead of using dlopen to load them as libraries. This, for example, leads to SDL_mixer not being able to load its audio backends, when compiled with standard settings. As discussed at https://www.freelists.org/post/haikuports/SDL2-mixer-ogg-music-not-playing-and-other-stuff,2 , the best way to deal with this would be using dlopen instead of load_add_on. The following patch implements this change by dropping the Haiku-specific bits and using dlopen instead.

808c75d1

2016-10-07T18:57:40

Fixed bug 2824 - Add Fcitx Input Method Support Weitian Leung Just moved ibus direct call to SDL_IME_* related functions, and adds fcitx IME support (uses DBus, too), enable with env: SDL_IM_MODULE=fcitx (ibus still the default one)

2a2c8d42

2016-04-21T03:16:44

Initial shot at a renderer target for Apple's Metal API. This isn't complete, but is enough to run testsprite2. It's currently Mac-only; with a little work to figure out how to properly glue in a Metal layer to a UIView, this will likely work on iOS, too. This is only wired up to the configure script right now, and disabled by default. CMake and Xcode still need their bits filled in as appropriate.

42065e78

2016-01-02T10:10:34

Updated copyright to 2016

0e45984f

2015-06-21T17:33:46

Fixed crash if initialization of EGL failed but was tried again later. The internal function SDL_EGL_LoadLibrary() did not delete and remove a mostly uninitialized data structure if loading the library first failed. A later try to use EGL then skipped initialization and assumed it was previously successful because the data structure now already existed. This led to at least one crash in the internal function SDL_EGL_ChooseConfig() because a NULL pointer was dereferenced to make a call to eglBindAPI().

e3f4ca0d

2015-06-08T01:13:51

configure/cmake/x11: Removed SDL_VIDEO_DRIVER_X11_CONST_PARAM_XDATA32 test. This was the only thing that made SDL_config.h generate differently between 32 and 64-bit versions of Linux, so instead we force a function cast in our X11 code to match our dynamic loader version, which removes the compile error on some machines that prompted this test in the first place. Xlib never wrote to this data, so if you're on an older Xlib where this param wasn't const, your data should still be intact when we force the caller to think it was actually const after all. Fixes Bugzilla #1893.

2a757825

2015-05-28T00:30:21

X11: Add Xdbe support to message boxes (thanks, Melker!). Without this, message boxes with a lot of text will noticibly flicker as you mouse over buttons. Fixes Bugzilla #2343.

2c4a6ea0

2015-05-26T06:27:46

Updated the copyright year to 2015

b72938c8

2015-04-20T12:22:44

Windows: Always set the system timer resolution to 1ms by default. An existing hint lets apps that don't need the timer resolution changed avoid this, to save battery, etc, but this fixes several problems in timing, audio callbacks not firing fast enough, etc. Fixes Bugzilla #2944.

fe6c797c

2015-04-10T23:30:31

Fixed an iOS view orientation issue when SDL_GL_CreateContext or SDL_CreateRenderer is called.

b88ca1b4

2015-02-10T16:28:56

the last parameter of XChangeProperty is the number of elements.. and when the element format is 32.. the element is "long" so we have 5 long elements here. Yes this seems confusing as on mac+linux Long is either 32 or 64bits depending on the architecture, but this is how the X11 protocol is defined. Thus 5 is the correct value for the nelts here. Not 5 or 10 depending on the architecture. More info on the confusion https://bugs.freedesktop.org/show_bug.cgi?id=16802

b48e54aa

2015-01-26T22:00:29

Fixed bug 2802 - [patch] Fix android build compiling in wrong filesystem implementation Jonas Kulla The configure script didn't differentiate between Linux and Android, unconditionally compiling in the unix implementation of SDL_sysfilesystem.c. I'm probably one of the very few people building SDL for android using classic configure + standalone toolchain, so this has gone undetected all along.

fe40a172

2014-12-18T00:19:52

Initial merge of Emscripten port! With this commit, you can compile SDL2 with Emscripten ( http://emscripten.org/ ), and make your SDL-based C/C++ program into a web app. This port was due to the efforts of several people, including: Charlie Birks, Sathyanarayanan Gunasekaran, Jukka Jyl?nki, Alon Zakai, Edward Rudd, Bruce Mitchener, and Martin Gerhardy. (Thanks, everyone!)

70438be2

2014-12-03T10:55:23

WinRT: fixed bug whereby SDL would override an app's default orientation WinRT apps can set a default, preferred orientation via a .appxmanifest file. SDL was overriding this on app startup, and making the app use all possible orientations (landscape and portrait). Thanks to Eric Wing for the heads up on this!

9c398852

2014-11-22T22:20:40

Corrected header file documentation comment.

251ca855

2014-10-15T09:18:17

Expanded the iMX6 video driver into a general Vivante video driver that works across multiple SoCs

24c86b55

2014-09-11T19:24:42

[X11] Reconcile logical keyboard state with physical state on FocusIn since the window system doesn't do it for us like other platforms. This prevents sticky keys and missed keys when going in and out of focus, for example Alt would appear to stick if switching away from an SDL app with Alt-Tab and had to be pressed again. CR: Sam

50cc4efe

2014-09-10T08:54:01

Freescale i.MX6 video driver --- CMakeLists.txt | 2 + cmake/sdlchecks.cmake | 20 +++ configure | 51 +++++++ configure.in | 28 ++++ include/SDL_config.h.cmake | 1 + include/SDL_config.h.in | 1 + src/video/SDL_sysvideo.h | 3 + src/video/SDL_video.c | 3 + src/video/mx6/SDL_mx6events.c | 45 ++++++ src/video/mx6/SDL_mx6events_c.h | 31 +++++ src/video/mx6/SDL_mx6opengles.c | 211 ++++++++++++++++++++++++++++ src/video/mx6/SDL_mx6opengles.h | 68 +++++++++ src/video/mx6/SDL_mx6video.c | 301 ++++++++++++++++++++++++++++++++++++++++ src/video/mx6/SDL_mx6video.h | 78 +++++++++++ 14 files changed, 843 insertions(+) create mode 100644 src/video/mx6/SDL_mx6events.c create mode 100644 src/video/mx6/SDL_mx6events_c.h create mode 100644 src/video/mx6/SDL_mx6opengles.c create mode 100644 src/video/mx6/SDL_mx6opengles.h create mode 100644 src/video/mx6/SDL_mx6video.c create mode 100644 src/video/mx6/SDL_mx6video.h

1ea86978

2014-08-17T13:11:55

Removed SDL_round() because the license wasn't compatible with zlib

4e7db78e

2014-08-16T23:23:15

Added SDL_round(), contributed by Benoit Pierre - thanks!

8077bf3d

2014-07-07T21:27:42

Fixed bug 2618 - incomplete pthread-based lock support should be removed binarycrusader Since changeset 358696c354a8, SDL 2.0 has been broken on Solaris when compiling with the Solaris Studio compiler (which uses the pthread implementation of SDL_AtomicLock). Notably, it gets stuck at the MemoryBarrierRelease in SDL_GetErrBuf: 6585 # 218 6586 if (!tls_errbuf && !tls_being_created) { 6587 SDL_AtomicLock_REAL ( & tls_lock ); 6588 if (!tls_errbuf) { 6589 SDL_TLSID slot; 6590 tls_being_created = SDL_TRUE; 6591 slot = SDL_TLSCreate_REAL ( ); 6592 tls_being_created = SDL_FALSE; 6593 { SDL_SpinLock _tmp = 0 ; SDL_AtomicLock_REAL ( & _tmp ) ; SDL_AtomicUnlock_REAL ( & _tmp ) ; }; ^^^ loops forever above 6594 tls_errbuf = slot; 6595 } 6596 SDL_AtomicUnlock_REAL ( & tls_lock ); 6597 } Running: testthread (process id 28926) ^Cdbx: warning: Interrupt ignored but forwarded to child. signal INT (Interrupt) in __nanosleep at 0xfe52a875 0xfe52a875: __nanosleep+0x0015: jae __nanosleep+0x23 [ 0xfe52a883, .+0xe ] Current function is SDL_Delay_REAL 204 was_error = nanosleep(&tv, &elapsed); (dbx) where [1] __nanosleep(0xfeffe848, 0xfeffe850, 0xfe75a5ac, 0xfe5169d8), at 0xfe52a875 [2] nanosleep(0xfeffe848, 0xfeffe850), at 0xfe516a3b =>[3] SDL_Delay_REAL(ms = 0), line 204 in "SDL_systimer.c" [4] SDL_AtomicLock_REAL(lock = 0xfeffe88c), line 104 in "SDL_spinlock.c" [5] SDL_GetErrBuf(), line 225 in "SDL_thread.c" [6] SDL_ClearError_REAL(), line 216 in "SDL_error.c" [7] SDL_InitSubSystem_REAL(flags = 0), line 116 in "SDL.c" [8] SDL_Init_REAL(flags = 0), line 244 in "SDL.c" [9] SDL_Init(a = 0), line 89 in "SDL_dynapi_procs.h" [10] main(argc = 1, argv = 0xfeffe948), line 65 in "testthread.c" As far as I can tell, this is because pthread_spin_trylock() always returns EBUSY for this particular lock; since it works in other places, I'm suspicious. Different Solaris Studio compiler versions seem to make no difference. I've verified this is broken on Linux as well if SDL_spinlock.c is modified to use the pthread implementation. This appears to be because pthread_spin_init() and pthread_spin_destroy() are not used with the locks as required.

b79e7f32

2014-07-03T15:39:55

Split the XInput and DirectInput code so Windows RT can use the existing XInput support.

41a39837

2014-06-18T20:11:39

Add IBus IME Support, move DBus code to its own file. (v3.3 squashed)

efa2d058

2014-06-08T18:18:13

Fixes audio for Native Client, and other fixes... - SDL_NaClMount, SDL_NaClUmount - Default mounting of https at / in SDL's main function - More documentation in README-nacl.txt

6101e4b2

2014-06-07T18:20:01

Added SDL_sqrtf(), SDL_tan(), SDL_tanf()

1e352d79

2014-06-06T15:45:59

Chrome's Native Client backend implementation

2a7aa9bd

2014-05-06T00:13:07

Fix build on Windows targets without dxgi.h, like MingW32.

3dcb451f

2014-04-09T21:29:19

Added a README file regarding WinRT support To note, this file is currently formatted with CRLF line endings, rather than LF, to allow the file to be viewed with Notepad.

9eccde51

2014-04-06T00:30:48

Enable building of Android libraries using a standalone NDK

1a35f32b

2014-03-10T01:51:03

Converted David Ludwig's D3D11 renderer to C and optimized it. The D3D11 renderer is now slightly faster than D3D9 on my Windows 8 machine (testsprite2 runs at 3400 FPS vs 3100 FPS) This will need tweaking to fix the Windows RT build.

89fd0faf

2014-02-03T11:52:54

Hooked up dynamic loading for Mir.

19f8c622

2014-02-02T23:41:46

Added Mir video target (thanks, Brandon!).

58edac3e

2014-02-02T00:53:27

272ebb8e

2014-01-09T13:56:21

Dynamic loading support for Wayland

fce6257c

2013-12-27T09:29:39

Implements touch support on QTWayland. Contributed by Thomas Perl.

ec1cb49e

2013-12-14T20:18:43

Wayland support Based on the original port to Wayland by: Joel Teichroeb, Benjamin Franzke, Scott Moreau, et al. Additional changes in this commit, done by me: * Wayland uses the common EGL framework * EGL can now create a desktop OpenGL context * testgl2 loads GL functions dynamically, no need to link to libGL anymore * Assorted fixes to the Wayland backend Tested on the Weston Compositor (v1.0.5) that ships with Ubuntu 13.10, running Weston under X. Tests ran: testrendercopyex (all backends), testgl2, testgles2,testintersections

d01ad02b

2013-12-09T15:17:20

Hook up SDL_acos and SDL_asin properly.

f848adff

2013-11-29T10:06:08

Improve Android pause/resume behavior.

e7693740

2013-11-24T23:35:38

Added SDL_vsscanf().

00003e8c

2013-11-14T11:51:24

Renamed things named after BeOS to be named after Haiku instead.

7550ddcc

2013-11-13T22:35:26

Started BeOS removal: merged BeOS thread and pthread code. Haiku uses most of the standard pthread API, with a few #ifdefs where we still need to fallback onto the old BeOS APIs. BeOS, however, does not support pthreads (or maybe doesn't support it well), so I'm unplugging support for the platform with this changeset. Be Inc went out of business in 2001.

b39a4daf

2013-10-03T10:28:10

SDL_TEXTINPUT support for EVDEV

9ceed73d

2013-09-28T13:28:19

Raspberry Pi support (also unified UDEV and EVDEV support)

f77c2372

2013-08-22T13:00:05

Added SDL_VIDEO_OPENGL_ES2 to the SDL_config.h templates (Thanks, Kerim!).

2dd7091e

2013-08-20T19:57:11

Added SDL_GetBasePath() and SDL_GetPrefPath() in new filesystem module.

0eeb76d8

2013-08-19T16:29:46

Fixes bug #2037, common EGL code for Android and X11

dad42067

2013-08-12T11:13:50

Fixes #2022, do not resume on Android when surfaceChanged If the app is in landscape mode and the user presses the power button, a pause is followed immediately by a surfaceChanged event because the lock screen is shown in portrait mode. This triggers a "false" resume. So, we just pause and resume following the onWindowFocusChanged events. Also, wait for SDL_APP_WILLENTERBACKGROUND and SDL_APP_DIDENTERBACKGROUND before blocking the event pump.

1ad936eb

2013-08-11T19:56:43

Fixed bug 2027 - Full-screen appears to be broken - hang in SDL_DestroyWindow() Rainer Deyke I'm running Linux Mint 15 with the Cinnamon window manager. SDL_DestroyWindow consistently locks up for me when the window if fullscreen.

kc3-lang/SDL/include/SDL_config.h.in

include/SDL_config.h.in

Log