kc3-lang/SDL/docs/README-linux.md

Download

Linux

By default SDL will only link against glibc, the rest of the features will be enabled dynamically at runtime depending on the available features on the target system. So, for example if you built SDL with Xinerama support and the target system does not have the Xinerama libraries installed, it will be disabled at runtime, and you won’t get a missing library error, at least with the default configuration parameters.

Build Dependencies

Ubuntu 13.04, all available features enabled:

sudo apt-get install build-essential mercurial make cmake autoconf automake
libtool libasound2-dev libpulse-dev libaudio-dev libx11-dev libxext-dev
libxrandr-dev libxcursor-dev libxi-dev libxinerama-dev libxxf86vm-dev
libxss-dev libgl1-mesa-dev libesd0-dev libdbus-1-dev libudev-dev
libgles1-mesa-dev libgles2-mesa-dev libegl1-mesa-dev libibus-1.0-dev
fcitx-libs-dev

Ubuntu 16.04 can also add “libwayland-dev libxkbcommon-dev wayland-protocols” to that command line for Wayland support.

Ubuntu 16.10 can also add “libmirclient-dev libxkbcommon-dev” to that command line for Mir support.

NOTES:

Joystick does not work

If you compiled or are using a version of SDL with udev support (and you should!) there’s a few issues that may cause SDL to fail to detect your joystick. To debug this, start by installing the evtest utility. On Ubuntu/Debian:

sudo apt-get install evtest

Then run:

sudo evtest

You’ll hopefully see your joystick listed along with a name like “/dev/input/eventXX” Now run:

cat /dev/input/event/XX

If you get a permission error, you need to set a udev rule to change the mode of your device (see below)

Also, try:

sudo udevadm info --query=all --name=input/eventXX

If you see a line stating ID_INPUT_JOYSTICK=1, great, if you don’t see it, you need to set up an udev rule to force this variable.

A combined rule for the Saitek Pro Flight Rudder Pedals to fix both issues looks like:

SUBSYSTEM==”input”, ATTRS{idProduct}==”0763”, ATTRS{idVendor}==”06a3”, MODE=”0666”, ENV{ID_INPUT_JOYSTICK}=”1” SUBSYSTEM==”input”, ATTRS{idProduct}==”0764”, ATTRS{idVendor}==”06a3”, MODE=”0666”, ENV{ID_INPUT_JOYSTICK}=”1”

You can set up similar rules for your device by changing the values listed in idProduct and idVendor. To obtain these values, try:

sudo udevadm info -a --name=input/eventXX | grep idVendor
sudo udevadm info -a --name=input/eventXX | grep idProduct

If multiple values come up for each of these, the one you want is the first one of each.

On other systems which ship with an older udev (such as CentOS), you may need to set up a rule such as:

SUBSYSTEM=="input", ENV{ID_CLASS}=="joystick", ENV{ID_INPUT_JOYSTICK}="1"

Source

Download