kc3-lang/libjpeg-turbo/test/tjbenchtest.in

Branch - branch -main

• Show log

  Commit

• Hash : a2728582
  Author :
  Date : 2024-09-03T07:54:17
  

  TurboJPEG: ICC profile support
  

Download

• test/tjbenchtest.in

• #!/bin/bash
  
  set -u
  set -e
  trap onexit INT
  trap onexit TERM
  trap onexit EXIT
  
  onexit()
  {
  	if [ -d $OUTDIR ]; then
  		rm -rf $OUTDIR
  	fi
  }
  
  runme()
  {
  	echo \*\*\* $*
  	"$@"
  }
  
  EXT=bmp
  IMAGES="vgl_5674_0098.${EXT} vgl_6434_0018a.${EXT} vgl_6548_0026a.${EXT} shira_bird8.${EXT}"
  IMGDIR=@CMAKE_SOURCE_DIR@/testimages
  OUTDIR=`mktemp -d /tmp/__tjbenchtest_output.XXXXXX`
  EXEDIR=@CMAKE_BINARY_DIR@
  JAVA="@Java_JAVA_EXECUTABLE@"
  JAVAARGS="-cp $EXEDIR/java/turbojpeg.jar -Djava.library.path=$EXEDIR"
  TJBENCH=$EXEDIR/tjbench
  BMPARG=
  NSARG=
  YUVARG=
  ALLOC=0
  ALLOCARG=
  ENTROPYARG=
  JAVAARG=
  LOSSLSARG=
  LOSSLSPSV=
  TJQUAL=95
  x1SUBSAMP="444 GRAY"
  x24SUBSAMP="422 440 420 411 441"
  ALLSUBSAMP="444 422 440 420 411 441 GRAY"
  PRECISION=8
  if [ "$EXT" = "bmp" ]; then BMPARG=-b; fi
  
  if [ -d $OUTDIR ]; then
  	rm -rf $OUTDIR
  fi
  mkdir -p $OUTDIR
  
  while [ $# -gt 0 ]; do
  	case "$1" in
  	-yuv)
  		NSARG=-nos
  		YUVARG=-yuv
  
  # NOTE: The combination of tj3EncodeYUV*() and tj3CompressFromYUV*() does not
  # always produce bitwise-identical results to tj3Compress*() if subsampling is
  # enabled.  In both cases, if the image width or height are not evenly
  # divisible by the MCU width/height, then the bottom and/or right edge are
  # expanded.  However, the libjpeg code performs this expansion prior to
  # downsampling, and TurboJPEG performs it in tj3CompressFromYUV*(), which is
  # after downsampling.  Thus, the two will agree only if the width/height along
  # each downsampled dimension is an odd number or is evenly divisible by the MCU
  # width/height.  This disagreement basically amounts to a round-off error, but
  # there is no easy way around it, so for now, we just test the only image that
  # works.  (NOTE: shira_bird8 does not suffer from the above issue, but it
  # suffers from an unrelated problem whereby the combination of
  # tj3DecompressToYUV*() and tj3DecodeYUV*() does not produce bitwise-identical
  # results to tj3Decompress*() if decompression scaling is enabled.  This latter
  # phenomenon is not yet fully understood but is also believed to be some sort
  # of round-off error.)
  		IMAGES="vgl_6548_0026a.${EXT}"
  		;;
  	-alloc)
  		ALLOCARG=-alloc
  		ALLOC=1
  		;;
  	-java)
  		JAVAARG=-java
  		TJBENCH="$JAVA $JAVAARGS TJBench"
  		;;
  	-optimize)
  		ENTROPYARG=-optimize
  		;;
  	-progressive)
  		if [ "$ENTROPYARG" = "-arithmetic" ]; then
  			ENTROPYARG=-progressive-arithmetic
  		else
  			ENTROPYARG=-progressive
  		fi
  		;;
  	-arithmetic)
  		if [ "$ENTROPYARG" = "-progressive" ]; then
  			ENTROPYARG=-progressive-arithmetic
  		else
  			ENTROPYARG=-arithmetic
  		fi
  		;;
  	-lossless)
  		LOSSLSARG="-lossless"
  		LOSSLSPSV=4
  		TJQUAL=4
  		x1SUBSAMP=444
  		x24SUBSAMP=444
  		ALLSUBSAMP=444
  		;;
  	-precision)
  		shift
  		PRECISION=$1
  		if [ $PRECISION != 8 ]; then
  			EXT=ppm
  			IMAGES="monkey16.${EXT}"
  			BMPARG=
  		fi
  		;;
  	esac
  	shift
  done
  
  if [ $PRECISION = 8 -a "$YUVARG" = "" ]; then
  	if [ "$ENTROPYARG" = "-optimize" ]; then
  		IMAGES="vgl_6434_0018a.${EXT}"
  	elif [ "$ENTROPYARG" = "-progressive" ]; then
  		IMAGES="vgl_6548_0026a.${EXT}"
  	elif [ "$ENTROPYARG" = "-arithmetic" -o \
  		"$ENTROPYARG" = "-progressive-arithmetic" ]; then
  		IMAGES="shira_bird8.${EXT}"
  	fi
  fi
  
  exec >$EXEDIR/test/tjbenchtest$JAVAARG$YUVARG$ALLOCARG$ENTROPYARG$LOSSLSARG-$PRECISION.log
  
  ALLOCARG=${ALLOCARG//-alloc/-al}
  ENTROPYARG=${ENTROPYARG//-optimize/-o}
  ENTROPYARG=${ENTROPYARG//-progressive-arithmetic/-pro -a}
  ENTROPYARG=${ENTROPYARG//-progressive/-pro}
  ENTROPYARG=${ENTROPYARG//-arithmetic/-a}
  LOSSLSARG=${LOSSLSARG//-lossless/-l}
  
  XFORMNAME=(hflip vflip transpose transverse rot90 rot180 rot270)
  XFORMARGS=("-f h -r 2" "-f v" "-t -r 1b" -transv "-ro 90 -r 1" "-ro 180" "-ro 270")
  
  # Standard tests
  for image in $IMAGES; do
  
  	cp $IMGDIR/$image $OUTDIR
  	basename=`basename $image .${EXT}`
  	r1barg=
  	if [ "$LOSSLSARG" != "-l" ]; then
  		r1barg="-r 1b"
  	fi
  	runme $EXEDIR/cjpeg -q 95 -pre $PRECISION -dc fa $ENTROPYARG $LOSSLSARG $LOSSLSPSV -gr -outf $OUTDIR/${basename}_GRAY_fast_cjpeg.jpg $IMGDIR/${basename}.${EXT}
  	runme $EXEDIR/cjpeg -q 95 -pre $PRECISION -dc fa $ENTROPYARG $LOSSLSARG $LOSSLSPSV -sa 1x4 -r 2 -outf $OUTDIR/${basename}_441_fast_cjpeg.jpg $IMGDIR/${basename}.${EXT}
  	runme $EXEDIR/cjpeg -q 95 -pre $PRECISION -dc fa $ENTROPYARG $LOSSLSARG $LOSSLSPSV -sa 4x1 -r 1 -outf $OUTDIR/${basename}_411_fast_cjpeg.jpg $IMGDIR/${basename}.${EXT}
  	runme $EXEDIR/cjpeg -q 95 -pre $PRECISION -dc fa $ENTROPYARG $LOSSLSARG $LOSSLSPSV -sa 2x2 -outf $OUTDIR/${basename}_420_fast_cjpeg.jpg $IMGDIR/${basename}.${EXT}
  	runme $EXEDIR/cjpeg -q 95 -pre $PRECISION -dc fa $ENTROPYARG $LOSSLSARG $LOSSLSPSV -sa 1x2 $r1barg -outf $OUTDIR/${basename}_440_fast_cjpeg.jpg $IMGDIR/${basename}.${EXT}
  	runme $EXEDIR/cjpeg -q 95 -pre $PRECISION -dc fa $ENTROPYARG $LOSSLSARG $LOSSLSPSV -sa 2x1 -outf $OUTDIR/${basename}_422_fast_cjpeg.jpg $IMGDIR/${basename}.${EXT}
  	runme $EXEDIR/cjpeg -q 95 -pre $PRECISION -dc fa $ENTROPYARG $LOSSLSARG $LOSSLSPSV -sa 1x1 -outf $OUTDIR/${basename}_444_fast_cjpeg.jpg $IMGDIR/${basename}.${EXT}
  	runme $EXEDIR/cjpeg -q 95 -pre $PRECISION -dc i $ENTROPYARG $LOSSLSARG $LOSSLSPSV -gr -outf $OUTDIR/${basename}_GRAY_accurate_cjpeg.jpg $IMGDIR/${basename}.${EXT}
  	runme $EXEDIR/cjpeg -q 95 -pre $PRECISION -dc i $ENTROPYARG $LOSSLSARG $LOSSLSPSV -sa 1x4 -r 2 -outf $OUTDIR/${basename}_441_accurate_cjpeg.jpg $IMGDIR/${basename}.${EXT}
  	runme $EXEDIR/cjpeg -q 95 -pre $PRECISION -dc i $ENTROPYARG $LOSSLSARG $LOSSLSPSV -sa 4x1 -r 1 -outf $OUTDIR/${basename}_411_accurate_cjpeg.jpg $IMGDIR/${basename}.${EXT}
  	runme $EXEDIR/cjpeg -q 95 -pre $PRECISION -dc i $ENTROPYARG $LOSSLSARG $LOSSLSPSV -sa 2x2 -outf $OUTDIR/${basename}_420_accurate_cjpeg.jpg $IMGDIR/${basename}.${EXT}
  	runme $EXEDIR/cjpeg -q 95 -pre $PRECISION -dc i $ENTROPYARG $LOSSLSARG $LOSSLSPSV -sa 1x2 $r1barg -outf $OUTDIR/${basename}_440_accurate_cjpeg.jpg $IMGDIR/${basename}.${EXT}
  	runme $EXEDIR/cjpeg -q 95 -pre $PRECISION -dc i $ENTROPYARG $LOSSLSARG $LOSSLSPSV -sa 2x1 -outf $OUTDIR/${basename}_422_accurate_cjpeg.jpg $IMGDIR/${basename}.${EXT}
  	runme $EXEDIR/cjpeg -q 95 -pre $PRECISION -dc i $ENTROPYARG $LOSSLSARG $LOSSLSPSV -sa 1x1 -outf $OUTDIR/${basename}_444_accurate_cjpeg.jpg $IMGDIR/${basename}.${EXT}
  	for samp in $ALLSUBSAMP; do
  		runme $EXEDIR/djpeg -dc fa -rg $NSARG $BMPARG -outf $OUTDIR/${basename}_${samp}_fast_djpeg.${EXT} $OUTDIR/${basename}_${samp}_fast_cjpeg.jpg
  		runme $EXEDIR/djpeg -dc i -rg $NSARG $BMPARG -outf $OUTDIR/${basename}_${samp}_accurate_djpeg.${EXT} $OUTDIR/${basename}_${samp}_accurate_cjpeg.jpg
  	done
  	for samp in $x24SUBSAMP; do
  		runme $EXEDIR/djpeg -dc fa -nos $BMPARG -outf $OUTDIR/${basename}_${samp}_fast_nosmooth_djpeg.${EXT} $OUTDIR/${basename}_${samp}_fast_cjpeg.jpg
  		runme $EXEDIR/djpeg -dc i -nos $BMPARG -outf $OUTDIR/${basename}_${samp}_accurate_nosmooth_djpeg.${EXT} $OUTDIR/${basename}_${samp}_accurate_cjpeg.jpg
  	done
  
  	# Compression
  	for dct in accurate fast; do
  		dctarg=
  		if [ "${dct}" = "fast" ]; then
  			dctarg="-d f"
  		fi
  		runme $TJBENCH $OUTDIR/$image $TJQUAL -pre $PRECISION -pi rgb -q -be 0.01 -w 0 ${dctarg} $YUVARG $ALLOCARG $ENTROPYARG $LOSSLSARG
  		if [ "$LOSSLSARG" != "-l" ]; then
  			runme $TJBENCH $OUTDIR/$image $TJQUAL -pre $PRECISION -su 440 -r 1b -pi rgb -q -be 0.01 -w 0 ${dctarg} $YUVARG $ALLOCARG $ENTROPYARG $LOSSLSARG
  			runme $TJBENCH $OUTDIR/$image $TJQUAL -pre $PRECISION -su 411 -r 1 -pi rgb -q -be 0.01 -w 0 ${dctarg} $YUVARG $ALLOCARG $ENTROPYARG $LOSSLSARG
  			runme $TJBENCH $OUTDIR/$image $TJQUAL -pre $PRECISION -su 441 -r 2 -pi rgb -q -be 0.01 -w 0 ${dctarg} $YUVARG $ALLOCARG $ENTROPYARG $LOSSLSARG
  		fi
  		for samp in $ALLSUBSAMP; do
  			if [ "$LOSSLSARG" = "-l" ]; then
  				runme cmp $OUTDIR/${basename}_LOSSLS_PSV${TJQUAL}.jpg $OUTDIR/${basename}_${samp}_${dct}_cjpeg.jpg
  			else
  				runme cmp $OUTDIR/${basename}_${samp}_Q${TJQUAL}.jpg $OUTDIR/${basename}_${samp}_${dct}_cjpeg.jpg
  			fi
  		done
  	done
  
  	for dct in fast accurate; do
  		dctarg=
  		if [ "${dct}" = "fast" ]; then
  			dctarg="-d f"
  		fi
  
  		# Tiled compression & decompression
  		runme $TJBENCH $OUTDIR/$image $TJQUAL -pre $PRECISION -pi rgb -ti -q -be 0.01 -w 0 ${dctarg} $YUVARG $ALLOCARG $ENTROPYARG $LOSSLSARG
  		for samp in $x1SUBSAMP; do
  			if [ $ALLOC = 1 ]; then
  				if [ "$LOSSLSARG" = "-l" ]; then
  					runme cmp $OUTDIR/${basename}_LOSSLS_PSV${TJQUAL}_full.${EXT} $OUTDIR/${basename}_${samp}_${dct}_djpeg.${EXT}
  					rm $OUTDIR/${basename}_LOSSLS_PSV${TJQUAL}_full.${EXT}
  				else
  					runme cmp $OUTDIR/${basename}_${samp}_Q${TJQUAL}_full.${EXT} $OUTDIR/${basename}_${samp}_${dct}_djpeg.${EXT}
  					rm $OUTDIR/${basename}_${samp}_Q${TJQUAL}_full.${EXT}
  				fi
  			else
  				if [ "$LOSSLSARG" = "-l" ]; then
  					for i in $OUTDIR/${basename}_LOSSLS_PSV${TJQUAL}_[0-9]*x[0-9]*.${EXT} \
  						$OUTDIR/${basename}_LOSSLS_PSV${TJQUAL}_full.${EXT}; do
  						runme cmp $i $OUTDIR/${basename}_${samp}_${dct}_djpeg.${EXT}
  						rm $i
  					done
  				else
  					for i in $OUTDIR/${basename}_${samp}_Q${TJQUAL}_[0-9]*x[0-9]*.${EXT} \
  						$OUTDIR/${basename}_${samp}_Q${TJQUAL}_full.${EXT}; do
  						runme cmp $i $OUTDIR/${basename}_${samp}_${dct}_djpeg.${EXT}
  						rm $i
  					done
  				fi
  			fi
  		done
  		runme $TJBENCH $OUTDIR/$image $TJQUAL -pre $PRECISION -pi rgb -ti -q -be 0.01 -w 0 -nos ${dctarg} $YUVARG $ALLOCARG $ENTROPYARG $LOSSLSARG
  		if [ "$LOSSLSARG" != "-l" ]; then
  			runme $TJBENCH $OUTDIR/$image $TJQUAL -pre $PRECISION -su 440 -pi rgb -ti -q -be 0.01 -w 0 -nos ${dctarg} $YUVARG $ALLOCARG $ENTROPYARG $LOSSLSARG
  			runme $TJBENCH $OUTDIR/$image $TJQUAL -pre $PRECISION -su 411 -pi rgb -ti -q -be 0.01 -w 0 -nos ${dctarg} $YUVARG $ALLOCARG $ENTROPYARG $LOSSLSARG
  			runme $TJBENCH $OUTDIR/$image $TJQUAL -pre $PRECISION -su 441 -pi rgb -ti -q -be 0.01 -w 0 -nos ${dctarg} $YUVARG $ALLOCARG $ENTROPYARG $LOSSLSARG
  		fi
  		for samp in $x24SUBSAMP; do
  			if [ $ALLOC = 1 ]; then
  				if [ "$LOSSLSARG" = "-l" ]; then
  					runme cmp $OUTDIR/${basename}_LOSSLS_PSV${TJQUAL}_full.${EXT} $OUTDIR/${basename}_${samp}_${dct}_nosmooth_djpeg.${EXT}
  					rm $OUTDIR/${basename}_LOSSLS_PSV${TJQUAL}_full.${EXT}
  				else
  					runme cmp $OUTDIR/${basename}_${samp}_Q${TJQUAL}_full.${EXT} $OUTDIR/${basename}_${samp}_${dct}_nosmooth_djpeg.${EXT}
  					rm $OUTDIR/${basename}_${samp}_Q${TJQUAL}_full.${EXT}
  				fi
  			else
  				if [ "$LOSSLSARG" = "-l" ]; then
  					for i in $OUTDIR/${basename}_LOSSLS_PSV${TJQUAL}_[0-9]*x[0-9]*.${EXT} \
  						$OUTDIR/${basename}_LOSSLS_PSV${TJQUAL}_full.${EXT}; do
  						runme cmp $i $OUTDIR/${basename}_${samp}_${dct}_nosmooth_djpeg.${EXT}
  						rm $i
  					done
  				else
  					for i in $OUTDIR/${basename}_${samp}_Q${TJQUAL}_[0-9]*x[0-9]*.${EXT} \
  						$OUTDIR/${basename}_${samp}_Q${TJQUAL}_full.${EXT}; do
  						# If the tile size is smaller than the MCU size, then there will be
  						# edge artifacts at the tile boundaries, so the decompressed image
  						# will not be identical to the untiled decompressed image.
  						TILESIZE=$(basename $(echo $i | sed 's/.*_//g') .${EXT})
  						if [ "$TILESIZE" = "8x8" ]; then
  							continue
  						fi
  						if [ "$TILESIZE" = "16x16" -a \
  							\( "${samp}" = "411" -o "${samp}" = "441" \) ]; then
  							continue
  						fi
  						runme cmp $i $OUTDIR/${basename}_${samp}_${dct}_nosmooth_djpeg.${EXT}
  						rm $i
  					done
  				fi
  			fi
  		done
  
  		# Tiled decompression
  		if [ "$LOSSLSARG" != "-l" ]; then
  			for samp in $x1SUBSAMP; do
  				runme $TJBENCH $OUTDIR/${basename}_${samp}_Q95.jpg $BMPARG -ti -q -be 0.01 -w 0 ${dctarg} $YUVARG $ALLOCARG $ENTROPYARG
  				if [ $ALLOC = 1 ]; then
  					runme cmp $OUTDIR/${basename}_${samp}_Q95_full.${EXT} $OUTDIR/${basename}_${samp}_${dct}_djpeg.${EXT}
  					rm $OUTDIR/${basename}_${samp}_Q95_full.${EXT}
  				else
  					for i in $OUTDIR/${basename}_${samp}_Q95_[0-9]*x[0-9]*.${EXT} \
  						$OUTDIR/${basename}_${samp}_Q95_full.${EXT}; do
  						runme cmp $i $OUTDIR/${basename}_${samp}_${dct}_djpeg.${EXT}
  						rm $i
  					done
  				fi
  			done
  			for samp in $x24SUBSAMP; do
  				runme $TJBENCH $OUTDIR/${basename}_${samp}_Q95.jpg $BMPARG -ti -q -be 0.01 -w 0 -nos ${dctarg} $YUVARG $ALLOCARG $ENTROPYARG
  				if [ $ALLOC = 1 ]; then
  					runme cmp $OUTDIR/${basename}_${samp}_Q95_full.${EXT} $OUTDIR/${basename}_${samp}_${dct}_nosmooth_djpeg.${EXT}
  					rm $OUTDIR/${basename}_${samp}_Q95_full.${EXT}
  				else
  					for i in $OUTDIR/${basename}_${samp}_Q95_[0-9]*x[0-9]*.${EXT} \
  						$OUTDIR/${basename}_${samp}_Q95_full.${EXT}; do
  						TILESIZE=$(basename $(echo $i | sed 's/.*_//g') .${EXT})
  						if [ "$TILESIZE" = "8x8" ]; then
  							continue
  						fi
  						if [ "$TILESIZE" = "16x16" -a \
  							\( "${samp}" = "411" -o "${samp}" = "441" \) ]; then
  							continue
  						fi
  						runme cmp $i $OUTDIR/${basename}_${samp}_${dct}_nosmooth_djpeg.${EXT}
  						rm $i
  					done
  				fi
  			done
  		fi
  	done
  
  	# Partial decompression
  	if [ "$LOSSLSARG" != "-l" -a "$YUVARG" != "-yuv" ]; then
  		for samp in $ALLSUBSAMP; do
  			CROPW8_8=103
  			CROPL8_8=16
  			CROPW7_8=91
  			CROPL7_8=14
  			if [ "${samp}" = "411" ]; then
  				CROPW8_8=87
  				CROPL8_8=32
  				CROPW7_8=77
  				CROPL7_8=28
  			fi
  			runme $EXEDIR/djpeg -rg -cr ${CROPW8_8}x90+${CROPL8_8}+5 $NSARG -outf $OUTDIR/${basename}_${samp}_scale_crop_djpeg.ppm $OUTDIR/${basename}_${samp}_accurate_cjpeg.jpg
  			runme $TJBENCH $OUTDIR/${basename}_${samp}_Q${TJQUAL}.jpg -cr ${CROPW8_8}X90+${CROPL8_8}+5 -q -be 0.01 -w 0 ${dctarg} $YUVARG $ALLOCARG $ENTROPYARG $LOSSLSARG
  			runme cmp $OUTDIR/${basename}_${samp}_Q${TJQUAL}_full.ppm $OUTDIR/${basename}_${samp}_scale_crop_djpeg.ppm
  			rm $OUTDIR/${basename}_${samp}_Q${TJQUAL}_full.ppm $OUTDIR/${basename}_${samp}_scale_crop_djpeg.ppm
  
  			runme $EXEDIR/djpeg -rg -s 14/16 -cr ${CROPW7_8}X81+${CROPL7_8}+3 $NSARG -outf $OUTDIR/${basename}_${samp}_scale_crop_djpeg.ppm $OUTDIR/${basename}_${samp}_accurate_cjpeg.jpg
  			runme $TJBENCH $OUTDIR/${basename}_${samp}_Q${TJQUAL}.jpg -s 7/8 -cr ${CROPW7_8}x81+${CROPL7_8}+3 -q -be 0.01 -w 0 ${dctarg} $YUVARG $ALLOCARG $ENTROPYARG $LOSSLSARG
  			runme cmp $OUTDIR/${basename}_${samp}_Q${TJQUAL}_7_8.ppm $OUTDIR/${basename}_${samp}_scale_crop_djpeg.ppm
  			rm $OUTDIR/${basename}_${samp}_Q${TJQUAL}_7_8.ppm $OUTDIR/${basename}_${samp}_scale_crop_djpeg.ppm
  
  			runme $EXEDIR/djpeg -rg -s 1/2 -cr 40x40+0+0 $NSARG -outf $OUTDIR/${basename}_${samp}_scale_crop_djpeg.ppm $OUTDIR/${basename}_${samp}_accurate_cjpeg.jpg
  			runme $TJBENCH $OUTDIR/${basename}_${samp}_Q${TJQUAL}.jpg -s 4/8 -cr 40x40+0+0 -q -be 0.01 -w 0 ${dctarg} $YUVARG $ALLOCARG $ENTROPYARG $LOSSLSARG
  			runme cmp $OUTDIR/${basename}_${samp}_Q${TJQUAL}_1_2.ppm $OUTDIR/${basename}_${samp}_scale_crop_djpeg.ppm
  			rm $OUTDIR/${basename}_${samp}_Q${TJQUAL}_1_2.ppm $OUTDIR/${basename}_${samp}_scale_crop_djpeg.ppm
  		done
  	fi
  
  	# Scaled decompression
  	for scale in 2_1 15_8 7_4 13_8 3_2 11_8 5_4 9_8 7_8 3_4 5_8 1_2 3_8 1_4 1_8; do
  		scalearg=`echo $scale | sed 's/\_/\//g'`
  		SCALE=$scale
  		if [ "$LOSSLSARG" = "-l" ]; then
  			SCALE=full
  		fi
  		for samp in $ALLSUBSAMP; do
  			runme $EXEDIR/djpeg -rg -s ${scalearg} $NSARG $BMPARG -outf $OUTDIR/${basename}_${samp}_${scale}_djpeg.${EXT} $OUTDIR/${basename}_${samp}_accurate_cjpeg.jpg
  			if [ "$LOSSLSARG" = "-l" ]; then
  				runme $TJBENCH $OUTDIR/${basename}_LOSSLS_PSV${TJQUAL}.jpg $BMPARG -s ${scalearg} -q -be 0.01 -w 0 $YUVARG $ALLOCARG $ENTROPYARG $LOSSLSARG
  				runme cmp $OUTDIR/${basename}_LOSSLS_PSV${TJQUAL}_${SCALE}.${EXT} $OUTDIR/${basename}_${samp}_${scale}_djpeg.${EXT}
  				rm $OUTDIR/${basename}_LOSSLS_PSV${TJQUAL}_${SCALE}.${EXT}
  			else
  				runme $TJBENCH $OUTDIR/${basename}_${samp}_Q${TJQUAL}.jpg $BMPARG -s ${scalearg} -q -be 0.01 -w 0 $YUVARG $ALLOCARG $ENTROPYARG $LOSSLSARG
  				runme cmp $OUTDIR/${basename}_${samp}_Q${TJQUAL}_${SCALE}.${EXT} $OUTDIR/${basename}_${samp}_${scale}_djpeg.${EXT}
  				rm $OUTDIR/${basename}_${samp}_Q${TJQUAL}_${SCALE}.${EXT}
  			fi
  		done
  	done
  
  	# Transforms
  	if [ "$LOSSLSARG" != "-l" ]; then
  		runme $EXEDIR/jpegtran -icc $IMGDIR/test1.icc -outf $OUTDIR/temp.jpg $OUTDIR/${basename}_444_Q95.jpg
  		runme mv $OUTDIR/temp.jpg $OUTDIR/${basename}_444_Q95.jpg
  		for samp in $ALLSUBSAMP; do
  			for xform in {0..6}; do
  				runme $EXEDIR/jpegtran -c a ${XFORMARGS[$xform]} -tri -outf $OUTDIR/${basename}_${samp}_${XFORMNAME[$xform]}_jpegtran.jpg $OUTDIR/${basename}_${samp}_Q95.jpg
  			done
  		done
  		for xform in {0..6}; do
  			for samp in $x1SUBSAMP; do
  				runme $EXEDIR/djpeg -rg $BMPARG -outf $OUTDIR/${basename}_${samp}_${XFORMNAME[$xform]}_jpegtran.${EXT} $OUTDIR/${basename}_${samp}_${XFORMNAME[$xform]}_jpegtran.jpg
  				runme $TJBENCH $OUTDIR/${basename}_${samp}_Q95.jpg $BMPARG ${XFORMARGS[$xform]} -ti -q -be 0.01 -w 0 $YUVARG $ALLOCARG $ENTROPYARG
  				if [ $ALLOC = 1 ]; then
  					runme cmp $OUTDIR/${basename}_${samp}_Q95_full.${EXT} $OUTDIR/${basename}_${samp}_${XFORMNAME[$xform]}_jpegtran.${EXT}
  					rm $OUTDIR/${basename}_${samp}_Q95_full.${EXT}
  				else
  					for i in $OUTDIR/${basename}_${samp}_Q95_[0-9]*x[0-9]*.${EXT} \
  						$OUTDIR/${basename}_${samp}_Q95_full.${EXT}; do
  						runme cmp $i $OUTDIR/${basename}_${samp}_${XFORMNAME[$xform]}_jpegtran.${EXT}
  						rm $i
  					done
  				fi
  			done
  			for samp in $x24SUBSAMP; do
  				runme $EXEDIR/djpeg -nos -rg $BMPARG -outf $OUTDIR/${basename}_${samp}_${XFORMNAME[$xform]}_jpegtran.${EXT} $OUTDIR/${basename}_${samp}_${XFORMNAME[$xform]}_jpegtran.jpg
  				runme $TJBENCH $OUTDIR/${basename}_${samp}_Q95.jpg $BMPARG ${XFORMARGS[$xform]} -ti -q -be 0.01 -w 0 -nos $YUVARG $ALLOCARG $ENTROPYARG
  				if [ $ALLOC = 1 ]; then
  					runme cmp $OUTDIR/${basename}_${samp}_Q95_full.${EXT} $OUTDIR/${basename}_${samp}_${XFORMNAME[$xform]}_jpegtran.${EXT}
  					rm $OUTDIR/${basename}_${samp}_Q95_full.${EXT}
  				else
  					for i in $OUTDIR/${basename}_${samp}_Q95_[0-9]*x[0-9]*.${EXT} \
  						$OUTDIR/${basename}_${samp}_Q95_full.${EXT}; do
  						TILESIZE=$(basename $(echo $i | sed 's/.*_//g') .${EXT})
  						if [ "$TILESIZE" = "8x8" ]; then
  							continue
  						fi
  						if [ "$TILESIZE" = "16x16" -a \
  							\( "${samp}" = "411" -o "${samp}" = "441" \) ]; then
  							continue
  						fi
  						runme cmp $i $OUTDIR/${basename}_${samp}_${XFORMNAME[$xform]}_jpegtran.${EXT}
  						rm $i
  					done
  				fi
  			done
  		done
  
  		# Grayscale transform
  		for xform in {0..6}; do
  			for samp in $ALLSUBSAMP; do
  				runme $TJBENCH $OUTDIR/${basename}_${samp}_Q95.jpg $BMPARG ${XFORMARGS[$xform]} -ti -q -be 0.01 -w 0 -g $YUVARG $ALLOCARG $ENTROPYARG
  				if [ $ALLOC = 1 ]; then
  					runme cmp $OUTDIR/${basename}_${samp}_Q95_full.${EXT} $OUTDIR/${basename}_GRAY_${XFORMNAME[$xform]}_jpegtran.${EXT}
  					rm $OUTDIR/${basename}_${samp}_Q95_full.${EXT}
  				else
  					for i in $OUTDIR/${basename}_${samp}_Q95_[0-9]*x[0-9]*.${EXT} \
  						$OUTDIR/${basename}_${samp}_Q95_full.${EXT}; do
  						TILESIZE=$(basename $(echo $i | sed 's/.*_//g') .${EXT})
  						if [ "$TILESIZE" = "8x8" -a \
  							"${samp}" != "444" -a "${samp}" != "GRAY" ]; then
  							continue
  						fi
  						if [ "$TILESIZE" = "16x16" -a \
  							\( "${samp}" = "411" -o "${samp}" = "441" \) ]; then
  							continue
  						fi
  						runme cmp $i $OUTDIR/${basename}_GRAY_${XFORMNAME[$xform]}_jpegtran.${EXT}
  						rm $i
  					done
  				fi
  			done
  		done
  
  		# Transforms with scaling
  		for xform in {0..6}; do
  			for samp in $ALLSUBSAMP; do
  				for scale in 2_1 15_8 7_4 13_8 3_2 11_8 5_4 9_8 7_8 3_4 5_8 1_2 3_8 1_4 1_8; do
  					scalearg=`echo $scale | sed 's/\_/\//g'`
  					runme $EXEDIR/djpeg -rg -s ${scalearg} $NSARG $BMPARG -outf $OUTDIR/${basename}_${samp}_${XFORMNAME[$xform]}_${scale}_jpegtran.${EXT} $OUTDIR/${basename}_${samp}_${XFORMNAME[$xform]}_jpegtran.jpg
  					runme $TJBENCH $OUTDIR/${basename}_${samp}_Q95.jpg $BMPARG ${XFORMARGS[$xform]} -s ${scalearg} -q -be 0.01 -w 0 $YUVARG $ALLOCARG $ENTROPYARG
  					runme cmp $OUTDIR/${basename}_${samp}_Q95_${scale}.${EXT} $OUTDIR/${basename}_${samp}_${XFORMNAME[$xform]}_${scale}_jpegtran.${EXT}
  					rm $OUTDIR/${basename}_${samp}_Q95_${scale}.${EXT}
  				done
  			done
  		done
  	fi
  
  done
  
  echo SUCCESS!
  

Download