kmx git

Commit	Date	Message
06fd9c4a	2012-01-26T23:27:10	Detect dual GPU cards by iterating through all GPUs, finding ones without fanspeed and matching twins with fanspeed one bus ID apart.
63e31b4d	2012-01-26T14:00:52	Move intensity range values into miner.h
9549dacf	2012-01-25T01:19:58	Detect dual GPU cards via the indirect information of - 1st card has a fan controller. 2nd card does not have a fan controller, cards share the same device name, and are one bus ID apart. Use this information to create paired devices, displaying the fan speed on both devices and using the hottest temperature from either GPU to control the overall fanspeed.
4ae7baf0	2012-01-24T01:23:31	BitForce: Need to use CreateFile and low-level (descriptor-based) C APIs on Windows, since fopen doesn't work with serial ports
2d29cdb6	2012-01-23T09:25:53	Read off lpThermalControllerInfo from each ADL device.
ec2c0b78	2012-01-22T18:24:55	Add API commands: config, switchpool, gpu settings, save
e15d57d7	2012-01-22T09:36:21	Implement socks4 proxy support.
2d5bbc77	2012-01-22T01:40:29	Provide nanosleep() equivalent for windows.
1b0b7e4a	2012-01-20T22:02:07	Merge pull request #78 from luke-jr/bugfix_adl Bugfix: Iterate over devices rather than threads for watchdog (and ADL)
9a0bcc88	2012-01-20T17:29:52	Bugfix: Iterate over devices rather than threads for watchdog (and ADL)
5179d224	2012-01-20T15:36:42	Introduce a --net-delay option which guarantees at least 250ms between any networking requests to not overload slow routers.
9840c12e	2012-01-20T14:47:17	Generalise locking init code.
3cb72218	2012-01-19T21:57:08	Restore old ugly inconsistent display of ADL information before the standard info
5dfc8b69	2012-01-08T19:56:15	BitForce FPGA support cgminer will scan for and mine BitForce FPGAs on USB ports by providing the new --scan-serial <device> option, or autodetect them by searching /dev/serial/by-id for BitFORCE_SHA256
b9d197de	2012-01-17T16:29:01	Refactor the CPU scanhash_* functions to use a common API. Fixes bugs. - Before, some returned bool, and others returned int (which was then turned into a bool with a comparison); now, everything returns a bool - Before, some set hashes_done to nonce - 1 when a share was found and others set it to nonce + 1 or 2. This caused some algorithms to scan/submit shares twice with the new cpu_scanhash function. Now, it has all been replaced with last_nonce, which is set to the final nonce checked by the scanhash_* func. - VIA needs the full data, and cannot use midstate. All the others were expecting midstate and data+64 for their parameters. Now, we pass midstate and the full data pointer, and let the scanhash_* function choose which to use.
a4d1fe1e	2012-01-07T02:56:27	Refactor miner_thread to be common code for any kind of device This expands on the device API, by taking the actual main thread out of the device's code, and calling the API only for specific tasks. This brings various changes that were made to the GPU thread code into the CPU miner. It also fixes a bug where shares found on old GPU work were discarded when it switched to a new work.
845961af	2012-01-05T19:26:01	Refactor to abstract device-specific code
5033dcd3	2011-12-27T18:33:49	fix test/set of thr->pth to also work in windows
2257b502	2011-12-27T11:37:30	Simplify longpoll changeover to just check which pool it should grab its next longpoll from. This should prevent locking hangs and thread cancellation crashes.
b69aa234	2011-12-26T10:49:27	Use control_lock to protect thr->pth for thread creation/destruction.
50a08922	2011-12-04T00:24:26	2.0.8x Full GPU stats, descriptive field names and --api-description
45068ced	2011-11-29T11:07:27	Version 2.0.8w (windows changes)
45ebf2c5	2011-11-24T20:41:31	Fix threading issues and bugs
d234b857	2011-11-24T12:59:30	API v0.2 Added GPU commands and improved messages
df3fad3d	2011-11-23T22:22:10	Add API options for port and listen mode
49532277	2011-11-23T17:01:45	Add summary command
bbe1702d	2011-11-23T16:25:13	Add quit command
23580566	2011-11-23T14:35:49	API v0.1
b0bfd816	2011-11-11T19:35:41	Don't build VIA on apple since -a auto bombs instead of gracefully ignoring VIA failing.
a70629a7	2011-11-01T15:19:26	Make longpoll do a mandatory flushing of all work even if the block hasn't changed, thus supporting longpoll initiated work change of any sort and merged mining.
8c63061e	2011-10-23T20:50:52	Allow a fixed speed difference between memory and GPU clock speed that will change memory speed when GPU speed is changed in autotune mode.
5133cf5b	2011-10-09T12:22:00	Add altivec 4 way support courtesy of Gilles Risch.
28796de7	2011-09-27T11:14:43	Merge https://github.com/geekmug/cgminer into gitmug
4128b954	2011-09-26T18:49:15	Add a --donation feature which reads a url/userpass from the author's site and contributes a percentage of getworks to the author, but default to off.
c54b0870	2011-09-26T19:33:28	Assiging the bswap_{16,32,64} macros to __builtin_bswap{16,32,64}.
21c2bc46	2011-09-26T15:24:20	Make it possible to set the intensity on a per-card basis, dynamic or static values.
0ae3f718	2011-09-23T10:45:43	Check last temperature we reached and don't change fan speed if it's already correcting.
ba14a670	2011-09-21T21:45:24	Remove EOL spaces from stderr and curses
b8ea0dd1	2011-09-17T13:23:58	Update curses logging to allow LOG_WARNING and LOG_ERR messages to still go through while within the menu, and drop share message to LOG_NOTICE.
67fe6ab7	2011-09-16T10:26:25	Don't both with adapter speed set as it has no effect on mining speed.
8e2becc1	2011-09-15T11:45:24	Change pth from being a pointer as we can dereference if we're unlucky on stopping longpoll.
833e020d	2011-09-15T10:33:23	Standardise the way all non-mining threads are destroyed to make sure we can safely cancel them, freeing ram and NULLifying pointers.
dff1a81d	2011-09-11T11:25:28	Use a re-entrant value to store what fanspeed we're trying to set in case the card doesn't support small changes. Force it to a multiple of 10% if it fails on trying to speed up the fan.
d5fe2cfd	2011-09-11T10:48:39	Flag devices that have never started and don't allow enabling of devices without restarting them.
1917643d	2011-09-09T10:19:01	Do away with the increasingly confusing and irrelevant total queued and efficiency measures per device.
6c8341f1	2011-09-08T14:44:14	Define max gpudevices in one macro.
9b5cd618	2011-09-08T13:04:39	Implement accepting a range of engine speeds as well to allow a lower limit to be specified on the command line.
3997f308	2011-09-07T10:43:26	Add a thermal cutoff option as well and set it to 95 degrees by default.
058303bc	2011-09-07T10:00:10	Only reset values on exiting if we've ever modified them.
b8be1e6c	2011-09-07T09:17:51	Ignore whether the display is active or not since only display enabled devices work this way, and we skip over repeat entries anwyay.
2053de6d	2011-09-06T10:11:34	Add the directory name from the arguments cgminer was called from as well to allow it running from a relative pathname.
5fc56a45	2011-09-05T09:36:43	Force the speed to high on startup and restore it to whatever the setting was on exit.
47f1a759	2011-09-04T23:23:31	Implement setting the GPU powertune value of all devices or each device as a comma separated value.
bd292258	2011-09-04T22:56:19	Add support for monitoring powertune setting.
3a5663ca	2011-09-04T22:25:31	Implement setting the GPU fan speed of all devices or each device as a comma separated value.
8ae273c5	2011-09-04T22:08:42	Implement setting the GPU voltage of all devices or each device as a comma separated value.
54bc30ce	2011-09-04T22:01:58	Implement setting the GPU memory clock speed of all devices or each device as a comma separated value.
ec8808d0	2011-09-04T21:55:06	Implement setting the GPU engine clock speed of all devices or each device as a comma separated value.
e9b5885e	2011-09-03T22:30:11	Add a gpu autotune option which adjusts GPU speed to maintain a target temperature within the bounds of the default GPU speed and any overclocking set.
dcc97e45	2011-09-03T15:46:57	Add an --auto-fan command line option to allow all GPUs to have autofan enabled from startup.
495adcbf	2011-09-03T15:33:53	Implement auto fanspeed adjustment to maintain a target temperature and fanspeed below 85%, with an overheat check that will speed the fan up to 100%.
35ace463	2011-09-03T13:02:21	Enable changing of engine clock setting on the fly.
d57cd919	2011-09-03T10:53:35	Implement ATI ADL support for GPU parameter monitoring now and setting later (temp, fan, clocks etc.). Check for the presence of the ADL header files in ADL_SDK. Import adl_functions.h from amd overdrive ctrl. Implement a setup function that tries to detect GPUs that support the ADL and link in the parameters into the gpus struct. Put a summary of monitoring information from the GPU menu.
063efb19	2011-09-02T10:37:00	Rename localgen occasions to getwork fail occasions since localgen is unrelated now.
84965341	2011-09-01T13:19:51	Add start and stop time scheduling for regular time of day running or once off start/stop options.
a593afdb	2011-08-31T13:23:36	Use the curses_lock to protect the curses_active variable and test it under lock.
4969162c	2011-08-29T10:12:34	Check for SSE2 before trying to build 32 bit SSE2 assembly version. Prevents build failure when yasm is installed but -msse2 is not specified.
3d5f5554	2011-08-25T14:42:03	Allow a custom kernel path to be entered on the command line.
7dc3db23	2011-08-25T11:19:40	Implement SSE2 32 bit assembly algorithm as well.
dbf0a136	2011-08-24T21:50:04	Use the new hashes directly for counts instead of the fragile counters currently in use.
666fcc3f	2011-08-24T08:06:15	Move staged threads to hashes so we can sort them by time.
ced4a9ac	2011-08-23T11:40:48	Clean up the pool switching to not be dependent on whether the work can roll or not by setting a lagging flag and then the idle flag.
324d849b	2011-08-20T23:03:49	Attempt to restart a GPU once every minute while it's sick. Don't kill off the reinit thread if it fails to init a GPU but returns safely. Only declare a GPU dead if there's been no sign of activity from the reinit thread for 10 mins.
e49bfbf2	2011-08-18T12:17:10	Add per-device statics log output
d15d225a	2011-08-16T23:19:46	Changed phatk version to 2.2
1e77f044	2011-08-17T12:43:39	Clean up the longpoll management to ensure the right paths go to the right pool and display whether we're connected to LP or not in the status line.
4e48561a	2011-08-15T22:21:17	Rework the last-initialised time displayed.
b1289a01	2011-08-15T20:26:46	Revert "Move the non cl_ variables into the cgpu info struct to allow creating a new cl state on reinit, preserving known GPU variables." This reverts commit 28880d0dc7c601ee4479921502b66e913e38e36d.
7c50bb02	2011-08-15T20:26:27	Revert "Display last initialised time in gpu management info." This reverts commit 177e07aed32e6b38f615f52d3243620625ff93e0.
50504ef9	2011-08-14T13:57:58	If a work item has had any mining done on it, don't consider it discarded work.
639d38fb	2011-08-14T07:54:45	Revert "Make sure to give work items a starting time only once when they're staged." This reverts commit 626ae10d7c90c8a21897343758e5dd0b00016950. Failed to address all work items.
626ae10d	2011-08-14T02:33:55	Make sure to give work items a starting time only once when they're staged.
d6dd5d70	2011-08-14T01:54:47	Test each work item to see if it can be rolled instead of per-pool and roll whenever possible, adhering to the 60 second timeout.
177e07ae	2011-08-12T14:25:44	Display last initialised time in gpu management info.
28880d0d	2011-08-13T20:54:20	Move the non cl_ variables into the cgpu info struct to allow creating a new cl state on reinit, preserving known GPU variables. Create a new context from scratch in initCQ in case something was corrupted to maximise our chance of succesfully creating a new worker thread.
947a74bf	2011-07-30T01:23:17	Differentiate thread failure from GPU failure by declaring a GPU sick first and trying to restart the thread without re-initialising the card. If that fails, then try once more at ten minutes and declare it dead. This should prevent an attempted re-initialising of the GPU from taking out other GPUs.
38037606	2011-07-29T11:11:42	Reimplement the per-thread getwork count with proper accounting at get_work().
0fe22d8d	2011-07-29T11:02:47	Revert "Only update the thread getwork queue count if it actually results in a getwork request from the server." This reverts commit 2e607d44f2baa8e8f1156e7bd074128e1e0e8eeb. The count looks far too difficult to add up with this change since many are queued generically.
2e607d44	2011-07-29T10:39:58	Only update the thread getwork queue count if it actually results in a getwork request from the server.
0006eb2d	2011-07-28T10:36:48	Make the "quiet" mode still update the status and display errors, and add a new --real-quiet option which disables all output and can be set once while running.
e82e3902	2011-07-27T16:40:52	If work has been cloned it is already at the head of the list and when being reinserted into the queue it should be placed back at the head of the list.
98f609b5	2011-07-27T10:31:44	Sanity check to prove locking.
1536e085	2011-07-26T20:48:05	Increase efficiency of slow mining threads such as CPU miners dramatically. Do this by detecting which threads cannot complete searching a work item within the scantime and then divide up a work item into multiple smaller work items. Detect the age of the work items and if they've been cloned before to prevent doing the same work over. If the work is too old to be divided, then see if it can be time rolled and do that to generate work. This dramatically decreases the number of queued work items from a pool leading to higher overall efficiency (but the same hashrate and share submission rate).
fa17f034	2011-07-26T11:58:45	Implement much more accurate rolling statistics per thread and per gpu and improve accuracy of rolling displayed values.
7707ed4d	2011-07-26T10:26:03	Add a menu to manage GPUs on the fly allowing you to enable/disable GPUs or try restarting them. Keep track of which GPUs are alive versus enabled. Start threads for devices that are even disabled, but don't allow them to start working.
020cf7d6	2011-07-23T16:19:51	Build support in for all SSE if possible and only set the default according to machine capabilities.
a150140e	2011-07-23T16:00:49	Merge branch 'cgminer' of git://github.com/ckolivas/cgminer into cgminer
a9e1a255	2011-07-23T15:15:46	Make it possible to select the choice of kernel on the command line.
116a9dc0	2011-07-23T14:17:25	Update phatk kernel to one with new parameters for slightly less overhead again. Make the queue kernel parameters call a function pointer to select phatk or poclbm.
d37c3fe5	2011-07-22T23:43:26	Win32 threading and longpoll keepalive fixes.

06fd9c4a

2012-01-26T23:27:10

Detect dual GPU cards by iterating through all GPUs, finding ones without fanspeed and matching twins with fanspeed one bus ID apart.

63e31b4d

2012-01-26T14:00:52

Move intensity range values into miner.h

9549dacf

2012-01-25T01:19:58

Detect dual GPU cards via the indirect information of - 1st card has a fan controller. 2nd card does not have a fan controller, cards share the same device name, and are one bus ID apart. Use this information to create paired devices, displaying the fan speed on both devices and using the hottest temperature from either GPU to control the overall fanspeed.

4ae7baf0

2012-01-24T01:23:31

BitForce: Need to use CreateFile and low-level (descriptor-based) C APIs on Windows, since fopen doesn't work with serial ports

2d29cdb6

2012-01-23T09:25:53

Read off lpThermalControllerInfo from each ADL device.

ec2c0b78

2012-01-22T18:24:55

Add API commands: config, switchpool, gpu settings, save

e15d57d7

2012-01-22T09:36:21

Implement socks4 proxy support.

2d5bbc77

2012-01-22T01:40:29

Provide nanosleep() equivalent for windows.

1b0b7e4a

2012-01-20T22:02:07

Merge pull request #78 from luke-jr/bugfix_adl Bugfix: Iterate over devices rather than threads for watchdog (and ADL)

9a0bcc88

2012-01-20T17:29:52

Bugfix: Iterate over devices rather than threads for watchdog (and ADL)

5179d224

2012-01-20T15:36:42

Introduce a --net-delay option which guarantees at least 250ms between any networking requests to not overload slow routers.

9840c12e

2012-01-20T14:47:17

Generalise locking init code.

3cb72218

2012-01-19T21:57:08

Restore old ugly inconsistent display of ADL information before the standard info

5dfc8b69

2012-01-08T19:56:15

BitForce FPGA support cgminer will scan for and mine BitForce FPGAs on USB ports by providing the new --scan-serial <device> option, or autodetect them by searching /dev/serial/by-id for *BitFORCE_SHA256*

b9d197de

2012-01-17T16:29:01

Refactor the CPU scanhash_* functions to use a common API. Fixes bugs. - Before, some returned bool, and others returned int (which was then turned into a bool with a comparison); now, everything returns a bool - Before, some set hashes_done to nonce - 1 when a share was found and others set it to nonce + 1 or 2. This caused some algorithms to scan/submit shares twice with the new cpu_scanhash function. Now, it has all been replaced with last_nonce, which is set to the final nonce checked by the scanhash_* func. - VIA needs the full data, and cannot use midstate. All the others were expecting midstate and data+64 for their parameters. Now, we pass midstate and the full data pointer, and let the scanhash_* function choose which to use.

a4d1fe1e

2012-01-07T02:56:27

Refactor miner_thread to be common code for any kind of device This expands on the device API, by taking the actual main thread out of the device's code, and calling the API only for specific tasks. This brings various changes that were made to the GPU thread code into the CPU miner. It also fixes a bug where shares found on old GPU work were discarded when it switched to a new work.

845961af

2012-01-05T19:26:01

Refactor to abstract device-specific code

5033dcd3

2011-12-27T18:33:49

fix test/set of thr->pth to also work in windows

2257b502

2011-12-27T11:37:30

Simplify longpoll changeover to just check which pool it should grab its next longpoll from. This should prevent locking hangs and thread cancellation crashes.

b69aa234

2011-12-26T10:49:27

Use control_lock to protect thr->pth for thread creation/destruction.

50a08922

2011-12-04T00:24:26

2.0.8x Full GPU stats, descriptive field names and --api-description

45068ced

2011-11-29T11:07:27

Version 2.0.8w (windows changes)

45ebf2c5

2011-11-24T20:41:31

Fix threading issues and bugs

d234b857

2011-11-24T12:59:30

API v0.2 Added GPU commands and improved messages

df3fad3d

2011-11-23T22:22:10

Add API options for port and listen mode

49532277

2011-11-23T17:01:45

Add summary command

bbe1702d

2011-11-23T16:25:13

Add quit command

23580566

2011-11-23T14:35:49

API v0.1

b0bfd816

2011-11-11T19:35:41

Don't build VIA on apple since -a auto bombs instead of gracefully ignoring VIA failing.

a70629a7

2011-11-01T15:19:26

Make longpoll do a mandatory flushing of all work even if the block hasn't changed, thus supporting longpoll initiated work change of any sort and merged mining.

8c63061e

2011-10-23T20:50:52

Allow a fixed speed difference between memory and GPU clock speed that will change memory speed when GPU speed is changed in autotune mode.

5133cf5b

2011-10-09T12:22:00

Add altivec 4 way support courtesy of Gilles Risch.

28796de7

2011-09-27T11:14:43

Merge https://github.com/geekmug/cgminer into gitmug

4128b954

2011-09-26T18:49:15

Add a --donation feature which reads a url/userpass from the author's site and contributes a percentage of getworks to the author, but default to off.

c54b0870

2011-09-26T19:33:28

Assiging the bswap_{16,32,64} macros to __builtin_bswap{16,32,64}.

21c2bc46

2011-09-26T15:24:20

Make it possible to set the intensity on a per-card basis, dynamic or static values.

0ae3f718

2011-09-23T10:45:43

Check last temperature we reached and don't change fan speed if it's already correcting.

ba14a670

2011-09-21T21:45:24

Remove EOL spaces from stderr and curses

b8ea0dd1

2011-09-17T13:23:58

Update curses logging to allow LOG_WARNING and LOG_ERR messages to still go through while within the menu, and drop share message to LOG_NOTICE.

67fe6ab7

2011-09-16T10:26:25

Don't both with adapter speed set as it has no effect on mining speed.

8e2becc1

2011-09-15T11:45:24

Change pth from being a pointer as we can dereference if we're unlucky on stopping longpoll.

833e020d

2011-09-15T10:33:23

Standardise the way all non-mining threads are destroyed to make sure we can safely cancel them, freeing ram and NULLifying pointers.

dff1a81d

2011-09-11T11:25:28

Use a re-entrant value to store what fanspeed we're trying to set in case the card doesn't support small changes. Force it to a multiple of 10% if it fails on trying to speed up the fan.

d5fe2cfd

2011-09-11T10:48:39

Flag devices that have never started and don't allow enabling of devices without restarting them.

1917643d

2011-09-09T10:19:01

Do away with the increasingly confusing and irrelevant total queued and efficiency measures per device.

6c8341f1

2011-09-08T14:44:14

Define max gpudevices in one macro.

9b5cd618

2011-09-08T13:04:39

Implement accepting a range of engine speeds as well to allow a lower limit to be specified on the command line.

3997f308

2011-09-07T10:43:26

Add a thermal cutoff option as well and set it to 95 degrees by default.

058303bc

2011-09-07T10:00:10

Only reset values on exiting if we've ever modified them.

b8be1e6c

2011-09-07T09:17:51

Ignore whether the display is active or not since only display enabled devices work this way, and we skip over repeat entries anwyay.

2053de6d

2011-09-06T10:11:34

Add the directory name from the arguments cgminer was called from as well to allow it running from a relative pathname.

5fc56a45

2011-09-05T09:36:43

Force the speed to high on startup and restore it to whatever the setting was on exit.

47f1a759

2011-09-04T23:23:31

Implement setting the GPU powertune value of all devices or each device as a comma separated value.

bd292258

2011-09-04T22:56:19

Add support for monitoring powertune setting.

3a5663ca

2011-09-04T22:25:31

Implement setting the GPU fan speed of all devices or each device as a comma separated value.

8ae273c5

2011-09-04T22:08:42

Implement setting the GPU voltage of all devices or each device as a comma separated value.

54bc30ce

2011-09-04T22:01:58

Implement setting the GPU memory clock speed of all devices or each device as a comma separated value.

ec8808d0

2011-09-04T21:55:06

Implement setting the GPU engine clock speed of all devices or each device as a comma separated value.

e9b5885e

2011-09-03T22:30:11

Add a gpu autotune option which adjusts GPU speed to maintain a target temperature within the bounds of the default GPU speed and any overclocking set.

dcc97e45

2011-09-03T15:46:57

Add an --auto-fan command line option to allow all GPUs to have autofan enabled from startup.

495adcbf

2011-09-03T15:33:53

Implement auto fanspeed adjustment to maintain a target temperature and fanspeed below 85%, with an overheat check that will speed the fan up to 100%.

35ace463

2011-09-03T13:02:21

Enable changing of engine clock setting on the fly.

d57cd919

2011-09-03T10:53:35

Implement ATI ADL support for GPU parameter monitoring now and setting later (temp, fan, clocks etc.). Check for the presence of the ADL header files in ADL_SDK. Import adl_functions.h from amd overdrive ctrl. Implement a setup function that tries to detect GPUs that support the ADL and link in the parameters into the gpus struct. Put a summary of monitoring information from the GPU menu.

063efb19

2011-09-02T10:37:00

Rename localgen occasions to getwork fail occasions since localgen is unrelated now.

84965341

2011-09-01T13:19:51

Add start and stop time scheduling for regular time of day running or once off start/stop options.

a593afdb

2011-08-31T13:23:36

Use the curses_lock to protect the curses_active variable and test it under lock.

4969162c

2011-08-29T10:12:34

Check for SSE2 before trying to build 32 bit SSE2 assembly version. Prevents build failure when yasm is installed but -msse2 is not specified.

3d5f5554

2011-08-25T14:42:03

Allow a custom kernel path to be entered on the command line.

7dc3db23

2011-08-25T11:19:40

Implement SSE2 32 bit assembly algorithm as well.

dbf0a136

2011-08-24T21:50:04

Use the new hashes directly for counts instead of the fragile counters currently in use.

666fcc3f

2011-08-24T08:06:15

Move staged threads to hashes so we can sort them by time.

ced4a9ac

2011-08-23T11:40:48

Clean up the pool switching to not be dependent on whether the work can roll or not by setting a lagging flag and then the idle flag.

324d849b

2011-08-20T23:03:49

Attempt to restart a GPU once every minute while it's sick. Don't kill off the reinit thread if it fails to init a GPU but returns safely. Only declare a GPU dead if there's been no sign of activity from the reinit thread for 10 mins.

e49bfbf2

2011-08-18T12:17:10

Add per-device statics log output

d15d225a

2011-08-16T23:19:46

Changed phatk version to 2.2

1e77f044

2011-08-17T12:43:39

Clean up the longpoll management to ensure the right paths go to the right pool and display whether we're connected to LP or not in the status line.

4e48561a

2011-08-15T22:21:17

Rework the last-initialised time displayed.

b1289a01

2011-08-15T20:26:46

Revert "Move the non cl_ variables into the cgpu info struct to allow creating a new cl state on reinit, preserving known GPU variables." This reverts commit 28880d0dc7c601ee4479921502b66e913e38e36d.

7c50bb02

2011-08-15T20:26:27

Revert "Display last initialised time in gpu management info." This reverts commit 177e07aed32e6b38f615f52d3243620625ff93e0.

50504ef9

2011-08-14T13:57:58

If a work item has had any mining done on it, don't consider it discarded work.

639d38fb

2011-08-14T07:54:45

Revert "Make sure to give work items a starting time only once when they're staged." This reverts commit 626ae10d7c90c8a21897343758e5dd0b00016950. Failed to address all work items.

626ae10d

2011-08-14T02:33:55

Make sure to give work items a starting time only once when they're staged.

d6dd5d70

2011-08-14T01:54:47

Test each work item to see if it can be rolled instead of per-pool and roll whenever possible, adhering to the 60 second timeout.

177e07ae

2011-08-12T14:25:44

Display last initialised time in gpu management info.

28880d0d

2011-08-13T20:54:20

Move the non cl_ variables into the cgpu info struct to allow creating a new cl state on reinit, preserving known GPU variables. Create a new context from scratch in initCQ in case something was corrupted to maximise our chance of succesfully creating a new worker thread.

947a74bf

2011-07-30T01:23:17

Differentiate thread failure from GPU failure by declaring a GPU sick first and trying to restart the thread without re-initialising the card. If that fails, then try once more at ten minutes and declare it dead. This should prevent an attempted re-initialising of the GPU from taking out other GPUs.

38037606

2011-07-29T11:11:42

Reimplement the per-thread getwork count with proper accounting at get_work().

0fe22d8d

2011-07-29T11:02:47

Revert "Only update the thread getwork queue count if it actually results in a getwork request from the server." This reverts commit 2e607d44f2baa8e8f1156e7bd074128e1e0e8eeb. The count looks far too difficult to add up with this change since many are queued generically.

2e607d44

2011-07-29T10:39:58

Only update the thread getwork queue count if it actually results in a getwork request from the server.

0006eb2d

2011-07-28T10:36:48

Make the "quiet" mode still update the status and display errors, and add a new --real-quiet option which disables all output and can be set once while running.

e82e3902

2011-07-27T16:40:52

If work has been cloned it is already at the head of the list and when being reinserted into the queue it should be placed back at the head of the list.

98f609b5

2011-07-27T10:31:44

Sanity check to prove locking.

1536e085

2011-07-26T20:48:05

Increase efficiency of slow mining threads such as CPU miners dramatically. Do this by detecting which threads cannot complete searching a work item within the scantime and then divide up a work item into multiple smaller work items. Detect the age of the work items and if they've been cloned before to prevent doing the same work over. If the work is too old to be divided, then see if it can be time rolled and do that to generate work. This dramatically decreases the number of queued work items from a pool leading to higher overall efficiency (but the same hashrate and share submission rate).

fa17f034

2011-07-26T11:58:45

Implement much more accurate rolling statistics per thread and per gpu and improve accuracy of rolling displayed values.

7707ed4d

2011-07-26T10:26:03

Add a menu to manage GPUs on the fly allowing you to enable/disable GPUs or try restarting them. Keep track of which GPUs are alive versus enabled. Start threads for devices that are even disabled, but don't allow them to start working.

020cf7d6

2011-07-23T16:19:51

Build support in for all SSE if possible and only set the default according to machine capabilities.

a150140e

2011-07-23T16:00:49

Merge branch 'cgminer' of git://github.com/ckolivas/cgminer into cgminer

a9e1a255

2011-07-23T15:15:46

Make it possible to select the choice of kernel on the command line.

116a9dc0

2011-07-23T14:17:25

Update phatk kernel to one with new parameters for slightly less overhead again. Make the queue kernel parameters call a function pointer to select phatk or poclbm.

d37c3fe5

2011-07-22T23:43:26

Win32 threading and longpoll keepalive fixes.

thodg/cgminer/miner.h

miner.h

Log