|
d8233feb
|
2019-10-18T09:24:14
|
|
reflog: allow adding entries with newlines in their message
Currently, the reflog disallows any entries that have a message with
newlines, as that would effectively break the reflog format, which may
contain a single line per entry, only. Upstream git behaves a bit
differently, though, especially when considering stashes: instead of
rejecting any reflog entry with newlines, git will simply replace
newlines with spaces. E.g. executing 'git stash push -m "foo\nbar"' will
create a reflog entry with "foo bar" as entry message.
This commit adjusts our own logic to stop rejecting commit messages with
newlines. Previously, this logic was part of `git_reflog_append`, only.
There is a second place though where we add reflog entries, which is the
serialization code in the filesystem refdb. As it didn't contain any
sanity checks whatsoever, the refdb would have been perfectly happy to
write malformatted reflog entries to the disk. This is being fixed with
the same logic as for the reflog itself.
|
|
f673e232
|
2018-12-27T13:47:34
|
|
git_error: use new names in internal APIs and usage
Move to the `git_error` name in the internal API for error-related
functions.
|
|
|
0c7f49dd
|
2017-06-30T13:39:01
|
|
Make sure to always include "common.h" first
Next to including several files, our "common.h" header also declares
various macros which are then used throughout the project. As such, we
have to make sure to always include this file first in all
implementation files. Otherwise, we might encounter problems or even
silent behavioural differences due to macros or defines not being
defined as they should be. So in fact, our header and implementation
files should make sure to always include "common.h" first.
This commit does so by establishing a common include pattern. Header
files inside of "src" will now always include "common.h" as its first
other file, separated by a newline from all the other includes to make
it stand out as special. There are two cases for the implementation
files. If they do have a matching header file, they will always include
this one first, leading to "common.h" being transitively included as
first file. If they do not have a matching header file, they instead
include "common.h" as first file themselves.
This fixes the outlined problems and will become our standard practice
for header and source files inside of the "src/" from now on.
|
|
909d5494
|
2016-12-29T12:25:15
|
|
giterr_set: consistent error messages
Error messages should be sentence fragments, and therefore:
1. Should not begin with a capital letter,
2. Should not conclude with punctuation, and
3. Should not end a sentence and begin a new one
|
|
31d5dce3
|
2015-04-24T23:56:59
|
|
Fix wrong format string in git_reflog_drop() error message
|
|
20363d58
|
2014-06-28T07:26:33
|
|
reflog: constify byindex
|
|
29be3a6d
|
2014-01-14T21:33:35
|
|
Align git_signature_dup.
This changes git_signature_dup to actually honor oom conditions raised by
the call to git__strdup. It also aligns it with the error code return
pattern used everywhere else.
|
|
|
13c9e44a
|
2013-11-14T19:41:09
|
|
reflog: remove git_reflog_append_to()
This was a convenience method for the refs front-end to do the reflog
writing. This is now done in the backend and it has no more reason for
being.
|
|
|
d274deea
|
2013-08-20T11:12:34
|
|
reflog: add a convenience append function
Provide a function that reads a reflog, performs an append and writes back to the
backend in one call.
|
|
|
0174794a
|
2013-08-21T05:12:49
|
|
reflog: bring _append and _drop back to the frontend
These functions act purely on the reflog data structure.
|
|
|
b976f3c2
|
2013-08-19T13:01:49
|
|
reflog: move the reflog implementation into refdb_fs
References and their logs are logically coupled, let's make it so in
the code by moving the fs-based reflog implementation to live next to
the fs-based refs one.
As part of the change, make the function take names rather than
references, as only the names are relevant when looking up and
handling reflogs.
|
|
8cf80525
|
2013-09-11T20:13:59
|
|
errors: Fix format of some error messages
|
|
41e93563
|
2013-05-01T15:08:12
|
|
Error messages for a couple other boundary conditions
|
|
10c06114
|
2013-03-17T04:46:46
|
|
Several warnings detected by static code analyzer fixed
Implicit type conversion argument of function to size_t type
Suspicious sequence of types castings: size_t -> int -> size_t
Consider reviewing the expression of the 'A = B == C' kind. The expression is calculated as following: 'A = (B == C)'
Unsigned type is never < 0
|
|
|
359fc2d2
|
2013-01-08T17:07:25
|
|
update copyrights
|
|
08a325a3
|
2012-12-19T12:52:14
|
|
reflog: Actual error handling
|
|
|
8a810441
|
2012-12-19T12:48:12
|
|
reflog: Rename error handling
|
|
9ec50c25
|
2012-12-18T18:15:21
|
|
Make goto cleanup more consistent
There may be some question about whether this is likely to be needed
at all, but that's above my head at the moment.
|
|
|
3a6420f3
|
2012-12-18T17:46:18
|
|
don't deref before we've asserted
just sayin'.
|
|
de70aea6
|
2012-12-03T12:41:50
|
|
Remove GIT_SIGNATURE_VERSION and friends
|
|
|
80212ecb
|
2012-11-12T16:49:29
|
|
reflog: Deploy EINVALIDSPEC usage
|
|
|
c7231c45
|
2012-11-30T16:31:42
|
|
Deploy GITERR_CHECK_VERSION
|
|
|
4ec197f3
|
2012-11-30T12:52:42
|
|
Deploy GIT_SIGNATURE_INIT
|
|
|
a8122b5d
|
2012-11-21T15:39:03
|
|
Fix warnings on Win64 build
|
|
|
2508cc66
|
2012-11-18T21:38:08
|
|
Rename ref and reflog apis for consistency
|
|
|
b15df1d9
|
2012-11-17T18:29:51
|
|
reflog: make entry_byindex() and drop() git compliant
Passing 0 as the index now retrieves the most recent entry instead
of the oldest one.
|
|
|
331e7de9
|
2012-10-24T17:32:50
|
|
Extensions to rmdir and mkdir utilities
* Rework GIT_DIRREMOVAL values to GIT_RMDIR flags, allowing
combinations of flags
* Add GIT_RMDIR_EMPTY_PARENTS flag to remove parent dirs that
are left empty after removal
* Add GIT_MKDIR_VERIFY_DIR to give an error if item is a file,
not a dir (previously an EEXISTS error was ignored, even for
files) and enable this flag for git_futils_mkpath2file call
* Improve accuracy of error messages from git_futils_mkdir
|
|
|
e4c64cf2
|
2012-10-08T20:07:55
|
|
stash: add git_stash_drop()
|
|
|
1f87fa35
|
2012-10-09T18:29:26
|
|
reflog: fix bogus removal of reflog entries
|
|
|
27e3c583
|
2012-10-03T15:12:42
|
|
reflog: create reflog and its directory structure
|
|
|
d2aa6de7
|
2012-10-03T13:56:13
|
|
reflog: Make git_reflog_free() accept null param
|
|
|
0d64bef9
|
2012-10-05T15:56:57
|
|
Add complex checkout test and then fix checkout
This started as a complex new test for checkout going through the
"typechanges" test repository, but that revealed numerous issues
with checkout, including:
* complete failure with submodules
* failure to create blobs with exec bits
* problems when replacing a tree with a blob because the tree
"example/" sorts after the blob "example" so the delete was
being processed after the single file blob was created
This fixes most of those problems and includes a number of other
minor changes that made it easier to do that, including improving
the TYPECHANGE support in diff/status, etc.
|
|
|
e25dda51
|
2012-08-02T01:38:30
|
|
Merge remote-tracking branch 'nulltoken/topic/amd64-compat' into development
Conflicts:
src/netops.c
src/netops.h
src/oid.c
|
|
6810ba08
|
2012-07-28T11:33:12
|
|
Fix -Wuninitialized warning
|
|
|
f0244463
|
2012-07-27T18:49:37
|
|
branch: Add `repository` argument to `create`
Yes, we can get the repository from the owner of the object, but having
it marked explicitly makes the API more consistent.
|
|
|
b84f75c3
|
2012-07-27T18:43:02
|
|
reflog: Rename `entry_drop` to `drop`
|
|
|
c3be5c5a
|
2012-07-21T19:19:46
|
|
reflog: keep the reflog name in sync with the reference name
|
|
|
40c75652
|
2012-07-21T12:33:46
|
|
reflog: prevent git_reflog_append() from persisting the reflog back to disk
|
|
|
ae833178
|
2012-07-21T12:32:02
|
|
reflog: prevent git_reflog_read() from chocking when no log exists yet
|
|
|
bd72425d
|
2012-07-18T20:12:45
|
|
reflog: introduce git_reflog_write()
|
|
|
d284b3de
|
2012-07-16T12:12:53
|
|
reflog: rename git_reflog_write() to git_reflog_append()
|
|
|
59341a5d
|
2012-07-16T18:31:22
|
|
reflog: introduce git_reflog_entry_drop()
|
|
|
7c458e3a
|
2012-07-17T10:53:19
|
|
reflog: add GIT_OID_HEX_ZERO constant
|
|
|
b8457baa
|
2012-07-24T07:57:58
|
|
portability: Improve x86/amd64 compatibility
|
|
|
b6bfd96f
|
2012-07-03T12:07:33
|
|
refs: fix moving of the reflog when renaming a ref
|
|
|
40879fac
|
2012-05-02T15:59:02
|
|
Merge branch 'new-error-handling' into development
Conflicts:
.travis.yml
include/git2/diff.h
src/config_file.c
src/diff.c
src/diff_output.c
src/mwindow.c
src/path.c
tests-clar/clar_helpers.c
tests-clar/object/tree/frompath.c
tests/t00-core.c
tests/t03-objwrite.c
tests/t08-tag.c
tests/t10-refs.c
tests/t12-repo.c
tests/t18-status.c
tests/test_helpers.c
tests/test_main.c
|
|
a4c291ef
|
2012-03-20T21:57:38
|
|
Convert reflog to new errors
Cleaned up some other issues.
|
|
|
cb8a7961
|
2012-03-07T00:02:55
|
|
error-handling: Repository
This also includes droping `git_buf_lasterror` because it makes no sense
in the new system. Note that in most of the places were it has been
dropped, the code needs cleanup. I.e. GIT_ENOMEM is going away, so
instead it should return a generic `-1` and obviously not throw
anything.
|
|
5621d809
|
2012-03-06T17:51:04
|
|
Rename git_oid_to_string to git_oid_tostr
To conform the naming scheme of git_oid_fromstr we should change the
name of git_oid_to_string to git_oid_tostr.
|
|
|
1a481123
|
2012-02-17T00:13:34
|
|
error-handling: References
Yes, this is error handling solely for `refs.c`, but some of the
abstractions leak all ofer the code base.
|
|
|
13224ea4
|
2012-02-27T04:28:31
|
|
buffer: Unify `git_fbuffer` and `git_buf`
This makes so much sense that I can't believe it hasn't been done
before. Kill the old `git_fbuffer` and read files straight into
`git_buf` objects.
Also: In order to fully support 4GB files in 32-bit systems, the
`git_buf` implementation has been changed from using `ssize_t` for
storage and storing negative values on allocation failure, to using
`size_t` and changing the buffer pointer to a magical pointer on
allocation failure.
Hopefully this won't break anything.
|
|
5e0de328
|
2012-02-13T17:10:24
|
|
Update Copyright header
Signed-off-by: schu <schu-github@schulog.org>
|
|
|
1744fafe
|
2012-01-17T15:49:47
|
|
Move path related functions from fileops to path
This takes all of the functions that look up simple data about
paths (such as `git_futils_isdir`) and moves them over to path.h
(becoming `git_path_isdir`). This leaves fileops.h just with
functions that actually manipulate the filesystem or look at
the file contents in some way.
As part of this, the dir.h header which is really just for win32
support was moved into win32 (with some minor changes).
|
|
671bbdd3
|
2012-01-05T17:31:13
|
|
reflog_write: don't access free()'d memory
We get the oid of a reference, free the reference, then
convert the oid to a string. We need to convert the oid
before freeing the memory.
|
|
|
97769280
|
2011-11-30T11:27:15
|
|
Use git_buf for path storage instead of stack-based buffers
This converts virtually all of the places that allocate GIT_PATH_MAX
buffers on the stack for manipulating paths to use git_buf objects
instead. The patch is pretty careful not to touch the public API
for libgit2, so there are a few places that still use GIT_PATH_MAX.
This extends and changes some details of the git_buf implementation
to add a couple of extra functions and to make error handling easier.
This includes serious alterations to all the path.c functions, and
several of the fileops.c ones, too. Also, there are a number of new
functions that parallel existing ones except that use a git_buf
instead of a stack-based buffer (such as git_config_find_global_r
that exists alongsize git_config_find_global).
This also modifies the win32 version of p_realpath to allocate whatever
buffer size is needed to accommodate the realpath instead of hardcoding
a GIT_PATH_MAX limit, but that change needs to be tested still.
|
|
|
e42ea1f4
|
2011-11-25T21:30:08
|
|
Merge pull request #491 from schu/refs-cleanup
reference_rename() cleanup
|
|
|
b762e576
|
2011-11-17T15:10:27
|
|
filebuf: add GIT_FILEBUF_INIT and protect multiple opens and cleanups
Update all stack allocations of git_filebuf to use GIT_FILEBUF_INIT
and make git_filebuf_open and git_filebuf_cleanup safe to be called
multiple times on the same buffer.
Signed-off-by: Vicent Marti <tanoku@gmail.com>
|
|
|
b7c93a66
|
2011-11-21T13:01:40
|
|
Add git_reflog_rename() and git_reflog_delete()
Signed-off-by: schu <schu-github@schulog.org>
|
|
|
62dd6d16
|
2011-11-06T02:52:43
|
|
reflog: Do not free references before time
|
|
|
75abd2b9
|
2011-08-11T19:38:13
|
|
Free all used references in the source tree
Since references are not owned by the repository anymore we have to free
them manually now.
Signed-off-by: schu <schu-github@schulog.org>
|
|
|
89fb8f02
|
2011-10-28T19:04:23
|
|
Merge pull request #456 from brodie/perm-fixes
Create objects, indexes, and directories with the right file permissions
|
|
|
3286c408
|
2011-10-28T14:51:13
|
|
global: Properly use `git__` memory wrappers
Ensure that all memory related functions (malloc, calloc, strdup, free,
etc) are using their respective `git__` wrappers.
|
|
01ad7b3a
|
2011-09-06T15:48:45
|
|
*: correct and codify various file permissions
The following files now have 0444 permissions:
- loose objects
- pack indexes
- pack files
- packs downloaded by fetch
- packs downloaded by the HTTP transport
And the following files now have 0666 permissions:
- config files
- repository indexes
- reflogs
- refs
This brings libgit2 more in line with Git.
Note that git_filebuf_commit() and git_filebuf_commit_at() have both
gained a new mode parameter.
The latter change fixes an important issue where filebufs created with
GIT_FILEBUF_TEMPORARY received 0600 permissions (due to mkstemp(3)
usage). Now we chmod() the file before renaming it into place.
Tests have been added to confirm that new commit, tag, and tree
objects are created with the right permissions. I don't have access to
Windows, so for now I've guarded the tests with "#ifndef GIT_WIN32".
|
|
|
ce8cd006
|
2011-09-07T15:32:44
|
|
fileops/repository: create (most) directories with 0777 permissions
To further match how Git behaves, this change makes most of the
directories libgit2 creates in a git repo have a file mode of
0777. Specifically:
- Intermediate directories created with git_futils_mkpath2file() have
0777 permissions. This affects odb_loose, reflog, and refs.
- The top level folder for bare repos is created with 0777
permissions.
- The top level folder for non-bare repos is created with 0755
permissions.
- /objects/info/, /objects/pack/, /refs/heads/, and /refs/tags/ are
created with 0777 permissions.
Additionally, the following changes have been made:
- fileops functions that create intermediate directories have grown a
new dirmode parameter. The only exception to this is filebuf's
lock_file(), which unconditionally creates intermediate directories
with 0777 permissions when GIT_FILEBUF_FORCE is set.
- The test runner now sets the umask to 0 before running any
tests. This ensurses all file mode checks are consistent across
systems.
- t09-tree.c now does a directory permissions check. I've avoided
adding this check to other tests that might reuse existing
directories from the prefabricated test repos. Because they're
checked into the repo, they have 0755 permissions.
- Other assorted directories created by tests have 0777 permissions.
|
|
|
87d9869f
|
2011-09-19T03:34:49
|
|
Tabify everything
There were quite a few places were spaces were being used instead of
tabs. Try to catch them all. This should hopefully not break anything.
Except for `git blame`. Oh well.
|
|
|
bb742ede
|
2011-09-19T01:54:32
|
|
Cleanup legal data
1. The license header is technically not valid if it doesn't have a
copyright signature.
2. The COPYING file has been updated with the different licenses used in
the project.
3. The full GPLv2 header in each file annoys me.
|
|
|
84dd3820
|
2011-08-18T02:13:51
|
|
posix: Properly handle `snprintf` in all platforms
|
|
|
e7a3b317
|
2011-08-17T15:50:19
|
|
reflog.c: fix memory leaks
Signed-off-by: schu <schu-github@schulog.org>
|
|
|
bcb080b0
|
2011-08-16T09:57:43
|
|
reflog: fix memory leaks
Make sure to free the existing reflog when we run out or memory while
adding new entries.
Signed-off-by: schu <schu-github@schulog.org>
|
|
|
e7be57a9
|
2011-08-15T18:56:27
|
|
reflog: assimilate reflog API to return git_oid's
Rather than returning the OIDs out of the reflog as string return them
as git_oid.
Signed-off-by: schu <schu-github@schulog.org>
|
|
|
eed2714b
|
2011-08-01T17:00:31
|
|
reflog: avoid users writing a wrong ancestor OID
Disallow NULL as ancestor OID when writing a reflog entry for an
existing reference.
Signed-off-by: schu <schu-github@schulog.org>
|
|
b42a7f01
|
2011-07-15T15:07:59
|
|
reflog: fix cast warning
/home/kas/git/public/libgit2/src/reflog.c: In function ‘reflog_parse’:
/home/kas/git/public/libgit2/src/reflog.c:148:17: warning: cast discards ‘__attribute__((const))’ qualifier from pointer target type [-Wcast-qual]
Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
|
|
|
7757be33
|
2011-07-10T07:48:52
|
|
reflog: Fix reflog writer/reader
- Use a space to separate oids and signature
- Enforce test coverage
- Make test run in a temporary folder in order not to alter the test repository
|
|
|
38ce60f0
|
2011-07-09T08:36:37
|
|
Fix MSVC compilation warning
|
|
|
06c43821
|
2011-07-09T02:37:16
|
|
Remove unused methods
The direct-writes commit left some (slow) internals methods that
were no longer needed. These have been removed.
Also, the Reflog code was using the old `git_signature__write`, so
it has been rewritten to use a normal buffer and the new `writebuf`
signature writer. It's now slightly simpler and faster.
|
|
|
27df4275
|
2011-06-28T14:13:12
|
|
reflog: add API to read or write a reference log
So far libgit2 didn't support reference logs (reflog). Add a new
git_reflog_* API for basic reading and writing of reflogs:
* git_reflog_read
* git_reflog_write
* git_reflog_free
Signed-off-by: schu <schu-github@schulog.org>
|