kmx git

Commit	Date	Message
071750a3	2019-08-15T14:18:26	cmake: move _WIN32_WINNT definitions to root
d827b11b	2019-06-28T13:20:54	tests: execute leak checker via CTest directly Right now, we have an awful hack in our test CI setup that extracts the test command from CTest's output and then prepends the leak checker. This is dependent on non-machine-parseable output from CMake and also breaks on various ocassions, like for example when we have spaces in the current path or when the path contains backslashes. Both conditions may easily be triggered on Win32 systems, and in fact they do break our Azure Pipelines builds. Remove the awful hack in favour of a new CMake build option "USE_LEAK_CHECKER". If specifying e.g. "-DUSE_LEAK_CHECKER=valgrind", then we will set up all tests to be run under valgrind. Like this, we can again simply execute ctest without needing to rely on evil sourcery.
54a60ced	2019-06-15T21:45:26	mingw: disable format specification warnings MinGW uses gcc, which expects POSIX formatting for printf, but uses the Windows C library, which uses its own format specifiers. Therefore, it gets confused about format specifiers. Disable warnings for format specifiers.
e61b92e0	2019-06-24T15:22:39	clang: disable documentation-deprecated-sync Add the `-Wno-documentation-deprecated-sync` switch when compiling with clang, since our documentation adds `deprecated` markers, but we do not add the deprecation attribute in the code itself. (ie, the code is out of sync with the docs). In fact, we do not _want_ to mark these items as deprecated in the code, at least not yet, as we are not quite ready to bother our end-users with this since they're not going away.
393fb8a1	2019-06-17T12:15:19	cmake: default NTLM client to off if no HTTPS support If building libgit2 with `-DUSE_HTTPS=NO`, then CMake will generate an error complaining that there's no usable HTTPS backend for NTLM. In fact, it doesn't make sense to support NTLM when we don't support HTTPS. So let's should just have NTLM default to OFF when HTTPS is disabled to make life easier and to fix our OSSFuzz builds failing.
94fc83b6	2019-06-13T16:48:35	cmake: Modulize our TLS & hash detection The interactions between `USE_HTTPS` and `SHA1_BACKEND` have been streamlined. Previously we would have accepted not quite working configurations (like, `-DUSE_HTTPS=OFF -DSHA1_BACKEND=OpenSSL`) and, as the OpenSSL detection only ran with `USE_HTTPS`, the link would fail. The detection was moved to a new `USE_SHA1`, modeled after `USE_HTTPS`, which takes the values "CollisionDetection/Backend/Generic", to better match how the "hashing backend" is selected, the default (ON) being "CollisionDetection". Note that, as `SHA1_BACKEND` is still used internally, you might need to check what customization you're using it for.
fb529a01	2019-06-11T22:03:29	http-parser: use our bundled http-parser by default Our bundled http-parser includes bugfixes, therefore we should prefer our http-parser until such time as we can identify that the system http-parser has these bugfixes (using a version check). Since these bugs are - at present - minor, retain the ability for users to force that they want to use the system http-parser anyway. This does change the cmake specification so that people _must_ opt-in to the new behavior knowingly.
a7f65f03	2019-03-21T15:42:57	ntlm: add ntlmclient as a dependency Include https://github.com/ethomson/ntlmclient as a dependency.
ac2b235e	2019-05-21T12:22:40	regex: use REGEX_BACKEND as the cmake option name This avoids any misunderstanding with the REGEX keyword in cmake.
ce6d624a	2019-05-19T10:30:04	regex: optionally use PCRE2 Use PCRE2 and its POSIX compatibility layer if requested by the user. Although PCRE2 is adequate for our needs, the PCRE2 POSIX layer as installed on Debian and Ubuntu systems is broken, so we do not opt-in to it by default to avoid breaking users on those platforms.
c6e48fef	2019-02-17T21:51:34	regex: allow regex selection in cmake Users can now select which regex implementation they want to use: one of the system `regcomp_l`, the system PCRE, the builtin PCRE or the system's `regcomp`. By default the system `regcomp_l` will be used if it exists, otherwise the system PCRE will be used. If neither of those exist, then the builtin PCRE implementation will be used. The system's `regcomp` is not used by default due to problems with locales.
dcf81cdb	2019-02-13T23:56:40	deprecation: optionally enable hard deprecation Add a CMake option to enable hard deprecation; the resultant library will _not_ include any deprecated functions. This may be useful for internal CI builds that create libraries that are not shared with end-users to ensure that we do not use deprecated bits internally.
24ac9e0c	2019-02-13T23:26:54	deprecation: ensure we GIT_EXTERN deprecated funcs Although the error functions were deprecated, we did not properly mark them as deprecated. We need to include the `deprecated.h` file in order to ensure that the functions get their export attributes. Similarly, do not define `GIT_DEPRECATE_HARD` within the library, or those functions will also not get their export attributes. Define that only on the tests and examples.
7ed2baf7	2019-01-21T00:41:50	MSVC: ignore empty compilation units (warning LNK4221) A number of source files have their implementation #ifdef'd out (because they target another platform). MSVC warns on empty compilation units (with warning LNK4221). Ignore warning 4221 when creating the object library.
c951b825	2019-01-23T00:32:40	deprecation: define GIT_DEPRECATE_HARD internally Ensure that we do not use any deprecated functions in the library source, test code or examples.
57b753a0	2019-01-09T12:47:40	cmake: error when STDCALL is specified To explicitly break end-users who were specifying STDCALL, explicitly fail the cmake process to ensure that they know that they need to change their bindings. Otherwise, we would quietly ignore their option and the resulting cdecl library would produced undefined behavior.
a74dd39b	2019-01-09T12:33:47	Use cdecl calling conventions on Win32 The recommendation from engineers within Microsoft is that libraries should have a calling convention specified in the public API, and that calling convention should be cdecl unless there are strong reasons to use a different calling convention. We previously offered end-users the choice between cdecl and stdcall calling conventions. We did this for presumed wider compatibility: most Windows applications will use cdecl, but C# and PInvoke default to stdcall for WINAPI compatibility. (On Windows, the standard library functions are are stdcall so PInvoke also defaults to stdcall.) However, C# and PInvoke can easily call cdecl APIs by specifying an annotation. Thus, we will explicitly declare ourselves cdecl and remove the option to build as stdcall.
2cc66dd5	2019-01-10T17:03:38	cmake: remove unconditional -Wno-deprecated-declaration on APPLE After taking into consideration the following, I think this should be removed : - OpenSSL isn't the default on Apple platforms - you have to jump through hoops to get CMake to use OpenSSL on macOS (headers aren't in `/usr/include`, so you have to provide `-DOPENSSL_*` overrides) - users are likely (as getting anywhere near the installed 0.9.8 version is insanity IMHO) to package a "modern" version, which wouldn't be marked as deprecated
487233fa	2018-11-29T07:21:41	Merge pull request #4895 from pks-t/pks/unused-warnings Unused function warnings
3a2e4836	2018-11-18T09:52:12	CMake: disable deprecated documentation sync The `-Wdocumentation-deprecated-sync` option will warn when there is a doxygen `\deprecated` tag but there is no corresponding deprecation attribute on the function. We want to encourage users to not use particular APIs by marking them deprecated in the documentation without necessarily raising a compiler warning by marking an item as deprecated.
21142c5a	2018-10-29T10:04:48	http: remove cURL We previously used cURL to support HTTP proxies. Now that we've added this support natively, we can remove the curl dependency.
ffe39bab	2018-11-23T20:04:37	cmake: enable warnings for unused const variables Together with the warnings for unused warnings, we always had warnings for unused constant variables disabled since commit 823c0e9cc (Fix broken logic for attr cache invalidation, 2014-04-17). As we have now fixed all occurrences of such variables, we can safely enable those warnings again.
681c58cf	2018-11-21T11:21:02	cmake: enable warnings for unused functions Ever since commit 823c0e9cc (Fix broken logic for attr cache invalidation, 2014-04-17), we have completely disabled warnings for unused functions. The only comment that was added back then is about "annoying extra warnings" from Clang, but in fact we shouldn't just ignore warnings about functions which aren't used at all. Instead, the right thing would be to either only conditionally compile functions that aren't used in all configurations or, alternatively, to remove functions that aren't required at all. As remaining instances of unused functions have been removed in the last two commits, re-enable the warning.
b160a64f	2018-10-17T09:38:30	cmake: correct comment from libssh to libssh2 We use libssh2. We do not use libssh. Make sure to disambiguate them correctly.
aa0ae59a	2018-10-05T10:31:53	cmake: explicitly enable int-conversion warnings While GCC enables int-conversion warnings by default, it will currently only warn about such errors even in case where "-DENABLE_WERROR=ON" has been passed to CMake. Explicitly enable int-conversion warnings by using our `ENABLE_WARNINGS` macro, which will automatically use "-Werror=int-conversions" in case it has been requested by the user.
633584b5	2018-10-04T10:48:12	cmake: enable new quoted argument policy CMP0054 Quoting from CMP0054's documentation: Only interpret if() arguments as variables or keywords when unquoted. CMake 3.1 and above no longer implicitly dereference variables or interpret keywords in an if() command argument when it is a Quoted Argument or a Bracket Argument. The OLD behavior for this policy is to dereference variables and interpret keywords even if they are quoted or bracketed. The NEW behavior is to not dereference variables or interpret keywords that have been quoted or bracketed. The previous behaviour could be quite unexpected. Quoted arguments might be expanded in case where the value of the argument corresponds to a variable. E.g. `IF("MONKEY" STREQUAL "MONKEY")` would have been expanded to `IF("1" STREQUAL "1")` iff `SET(MONKEY 1)` was set. This behaviour was weird, and recent CMake versions have started to complain about this if they see ambiguous situations. Thus we want to disable it in favor of the new behaviour.
04d3853f	2018-10-04T10:47:29	cmake: remove spaces between `IF` and `(` for policies Our CMake coding style dictates that there should be no space between `IF` and its opening `(`. Adjust our policy statements to honor this style.
1621a37d	2018-09-29T13:22:59	Merge pull request #4812 from libgit2/ethomson/ci-refactor CI: refactoring
f2c1153d	2018-09-17T20:38:05	cmake: enable -Wformat and -Wformat-security We do not currently have any warnings in this regard, but it's good practice to have them on in case we introduce something.
943181c2	2018-09-10T12:36:51	Revert "clar: introduce CLAR_XML option" This reverts commit a2d73f5643814cddf90d5bf489332e14ada89ab8. Using clar to propagate the XML settings was a mistake.
a2d73f56	2018-08-24T11:23:19	clar: introduce CLAR_XML option Introduce a CLAR_XML option, to run the `ctest` commands with the new `-r` flag to clar. Permitted values are `OFF`, `ON` and a directory to write the XML test results to.
1a9cc182	2018-08-17T15:56:30	util: make the qsort_r check work on macOS This performs a compile-check by using CMake support, to differentiate the GNU version from the BSD version of qsort_r. Module taken from 4f252abea5f1d17c60f6ff115c9c44cc0b6f1df6, which I've checked against CMake 2.8.11.
12804c46	2018-07-20T12:24:08	cmake: remove USE_SANITIZER and USE_COVERAGE options Both the USE_SANITIZER and USE_COVERAGE options are convenience options that turn on a set of CFLAGS. Despite our own set of CFLAGS required to build libgit2, we have no real business to mess with them, though, as they can easily be passed in by the user via specifying the CFLAGS environment variable. The reasoning behind not providing them is that as soon as we start adding those for some usecases, users might ask for other sets of CFLAGS catering to their specific need in another usecase. Thus, we do not want to support them here.
ad0cb297	2018-07-20T12:17:42	cmake: fix the unholy options alignment mess
186a7ba5	2018-07-19T15:13:40	cmake: error out if required C flags are not supported We do want to notify users compiling our source code early on if they try to use C flags which aren't supported. Add a new macro `AddCFlag`, which results in a fatal error in case the flag is not supported, and use it for our fuzzing flags.
59328ed8	2018-07-19T13:29:46	fuzzers: rename "fuzz" directory to match our style Our layout uses names like "examples" or "tests" which is why the "fuzz" directory doesn't really fit in here. Rename the directory to be called "fuzzers" instead. Furthermore, we rename the fuzzer "fuzz_packfile_raw" to "packfile_raw_fuzzer", which is also in line with the already existing fuzzer at google/oss-fuzz. While at it, rename the "packfile_raw" fuzzer to instead just be called "packfile" fuzzer.
60e610a2	2018-01-04T15:36:22	fuzzers: add build support and instructions This change adds support for building a fuzz target for exercising the packfile parser, as well as documentation. It also runs the fuzzers in Travis to avoid regressions.
e1a4a8eb	2018-06-25T11:58:34	cmake: enforce C90 standard While the aim of libgit2 was to conform to C90 code, we never instructed the compiler to enforce C90 compliance. Thus, quite a few violations were able to get into our code base, which have been removed with the previous commits. As we are now able to build libgit2 with C90 enforced, we can set the C_STANDARD property for our own build targets. Note that we explicitly avoid setting the C standard for our third-party dependencies. At least the zlib target does not build with C90 enforced, and we do not want to fix them by deviating from upstream. Thus we simply enforce no standard for them.
0f62e4c7	2018-04-27T10:38:49	cmake: resolve libraries found by pkg-config Libraries found by CMake modules are usually handled with their full path. This makes linking against those libraries a lot more robust when it comes to libraries in non-standard locations, as otherwise we might mix up libraries from different locations when link directories are given. One excemption are libraries found by PKG_CHECK_MODULES. Instead of returning libraries with their complete path, it will return the variable names as well as a set of link directories. In case where multiple sets of the same library are installed in different locations, this can lead the compiler to link against the wrong libraries in the end, when link directories of other dependencies are added. To fix this shortcoming, we need to manually resolve library paths returned by CMake against their respective library directories. This is an easy task to do with `FIND_LIBRARY`.
6c6be3ce	2018-03-29T22:13:59	mbedtls: use libmbedcrypto for hashing
e666495b	2018-03-08T08:31:49	cmake: enable shift count overflow warning
522f3e4b	2018-02-16T10:50:54	CMakeLists: increase strict aliasing level to 3 The strict aliasing rules disallow dereferencing the pointer to a variable of a certain type as another type, which is frequently used e.g. when casting structs to their base type. We currently have the warning level for strict aliasing rules set to `2`, which is described by gcc(1) as being "Aggressive, quick, not too precise." And in fact, we experience quite a lot of warnings when doing a release build due to that. GCC provides multiple levels, where higher levels are more accurate, but also slower due to the additional analysis required. Still, we want to have warning level 3 instead of 2 to avoid the current warnings we have in the Travis CI release builds. As this is the default warning level when no level is passed to `-Wstrict-aliasing`, we can just remove the level and use that default.
f8a2dda8	2018-02-05T15:21:37	cmake: move ENABLE_WARNINGS to a module
fc6e38c2	2018-02-02T18:03:38	cmake: Move IDE source munging to a module Move the odd code that provides a hierarchical display for projects within the IDEs to its own module.
ed298c8e	2018-02-02T18:01:51	cmake: move nanosecond detection to a module Move the nanosecond detection in time structures to its own module.
6416b91f	2018-02-02T17:58:44	cmake: enable policy CMP0042 Enable CMake policy CMP0042, if supported: > CMake 2.8.12 and newer has support for using ``@rpath`` in a target's > install name. This was enabled by setting the target property > ``MACOSX_RPATH``. The ``@rpath`` in an install name is a more > flexible and powerful mechanism than ``@executable_path`` or > ``@loader_path`` for locating shared libraries.
94aa36ef	2018-02-02T17:56:15	cmake: test for CMP0051 instead of version check We can use policy checks to see if a policy exists in cmake, like CMP0051, instead of relying on the version.
6d452600	2018-01-10T11:52:15	cmake: use a FEATURE_SUMMARY call compatible with 3.0.2 When we print features, we make an effort to support all the way back to pre-3.0. However, in the code for versions from 3 onward we call `FEATURE_SUMMARY` with multiple kinds of elements to print in the same line. This is only supported in CMake 3.1 and later, making the rather popular CMake 3.0.2 unable to build the library. Use a single kind of element per invocation. This means we need to provide a "description" text, which CMake provides for us if provide multiple kinds of elements.
ddd36510	2018-01-07T15:40:06	Merge pull request #4467 from libgit2/cmn/static-archive-later cmake: move the rule to find static archives close to building clar
85e40bbf	2018-01-07T12:51:26	cmake: move the rule to find static archives close to building clar If we're building static libraries, we want to use that for building our clar binary. This is done in 49551254 (2017-09-22; cmake: use static dependencies when building static libgit2) but that commit included the rule too early, making it affect the search for iconv, meaning we did not find it when we were building a static libgit2. Move the rule to just before building clar, after we've included the rules for building the library itself. This lets us find and link to the dynamic libiconv.
70aa6146	2017-12-05T08:48:31	cmake: allow explicitly choosing SHA1 backend Right now, if SHA1DC is disabled, the SHA1 backend is mostly chosen based on which system libgit2 is being compiled on and which libraries have been found. To give developers and distributions more choice, enable them to request specific backends by passing in a `-DSHA1_BACKEND=<BACKEND>` option instead. This completely replaces the previous auto-selection.
e7495ce6	2017-12-05T08:47:57	cmake: default to using SHA1DC Upstream git.git has changed their default SHA1 implementation to the collision-detection algorithm SHA1DC in commit e6b07da27 (Makefile: make DC_SHA1 the default, 2017-03-17). To match upstream, align ourselves and switch over to SHA1DC by default.
bbb213c1	2017-11-11T13:19:24	cmake: let USE_ICONV be optional on macOS Instead of forcing iconv support on macOS (by forcing `USE_ICONV` on), honor the `USE_ICONV` option only on macOS. Although macOS includes iconv by default, some macOS users may have a deficient installation for some reason and they should be provided a workaround to use libgit2 even in this situation. iconv support is now disabled entirely on non-macOS platforms. No other platform supports core.precomposeunicode, and iconv should never be linked.
a0b0b808	2017-11-11T14:03:14	cmake: Allow user to select bundled zlib Under some circumstances the installed / system version of zlib may not be desirable due to being too old or buggy. This patch adds the option `USE_BUNDLED_ZLIB` that will cause the bundled version of zlib to be used. We may also want to add similar functionality to allow the user to select other bundled 3rd-party dependencies instead of using the system versions. /cc @pks-t @ethomson
c9bb68c2	2017-09-07T00:41:54	cmake: move Darwin-specific block around This allows us to only link against CoreFoundation when using the SecureTransport backend
9980be03	2017-09-06T22:13:58	cmake: Add USE_HTTPS as a CMake option It defaults to ON, e.g. "pick whatever default is appropriate for the platform". It accepts one of SecureTransport, OpenSSL, WinHTTP, or OFF. It errors if the backend library couldn't be found.
10b25dbf	2017-08-10T00:03:30	cmake: braces are not needed here
fdd06874	2017-08-09T21:35:53	cmake: use FeatureSummary to display which features we end up using
4da74c83	2017-10-20T07:29:17	cmake: use project-relative binary and source directories Due to our split of CMake files into multiple modules, we had to replace some uses of the `${CMAKE_CURRENT_SOURCE_DIR}` and `${CMAKE_CURRENT_BINARY_DIR}` variables and replace them with `${CMAKE_SOURCE_DIR}` and `${CMAKE_BINARY_DIR}`. This enabled us to still be able to refer to top-level files when defining build instructions inside of a subdirectory. When replacing all variables, it was assumed that the absolute set of variables is always relative to the current project. But in fact, this is not the case, as these variables always point to the source and binary directory as given by the top-levl project. So the change actually broke the ability to include libgit2 directly as a subproject, as source files cannot be found anymore. Fix this by instead using project-specific source and binary directories with `${libgit2_SOURCE_DIR}` and `${libgit2_BINARY_DIR}`.
8bbee8f3	2017-10-14T08:36:54	Fix compilation for CMake versions 3.0.x where x >= 1 Apparently policy CMP0015 was added in CMake 3.1. With CMake 3.0.2, the build was failing with CMake Error at CMakeLists.txt:18 (CMAKE_POLICY): Policy "CMP0051" is not known to this version of CMake. This patch makes it work.
8ac8c78c	2017-10-09T15:15:08	Merge pull request #4356 from pks-t/pks/static-clar cmake: use static dependencies when building static libgit2
49551254	2017-09-22T09:34:37	cmake: use static dependencies when building static libgit2 CMake allows us to build a static library by simply setting the variable `BUILD_SHARED_LIBS` to `OFF`. While this causes us to create a static libgit2.a archive, it will not automatically cause CMake to only locate static archives when searching for dependencies. This does no harm in case of building our libgit2.a, as we do not want to include all required dependencies in the resulting archive anyway. Instead, we ask users of a static libgit2.a to link against the required set of static archives themselves, typically aided by the libgit2.pc file. Where it does cause harm, though, is when we build the libgit2_clar test suite. CMake has happily populated our LIBGIT2_LIBS variable with shared libraries, and so linking the final libgit2_clar test does not do the right thing. It will simply ignore those shared libraries, we end up with a test suite with undefined symbols. To fix the issue, we can instruct CMake to only locate libraries with a certain suffix. As static libraries are typically identifiable by their ".a" suffix on Unix-based systems, we can instruct CMake to only locate libraries with this suffix to restrict it from finding any shared libraries. This fixes building a static libgit2_clar test suite. Note that this ignores the problem on Windows. The problem here is that we cannot even distinguish static and dynamic libraries by only inspecting their suffix. So we just ignore the problem on Windows, for now.
cf9f3452	2017-09-06T07:38:32	cmake: bump minimum version to 2.8.11 Our current minimum CMake version is 2.8. This version does not yet allow us to use object libraries (introduced in 2.8.8) and target include directories (introduced in 2.8.12), which are both mechanisms we want to use to fix some specific problems. We previously were not able to bump our CMake version to a version supporting object libraries because Ubuntu Precise only had CMake version 2.8.7 in its repositories. But due to Precise being end of life now, we shouldn't need to honor it anymore. A current survey of some of the more conservative distributions brings up the following versions of CMake: - CentOS 5: 2.6.2 - CentOS 6: 2.8.12.2 - Debian 7: 2.8.11 - Fedora 23: 3.3.2 - OpenSUSE 13.2: 3.0.2 - Ubuntu Precise: 2.8.7 - Ubuntu Trusty: 2.8.12 The only two outliers here are CentOS 5 and Ubuntu Precise. CentOS is currently unsupported due to our minimum version being 2.8 and Ubuntu Precise is not maintained anymore. So the next smallest version supported by all major distributions is 2.8.11. While this does not yet support target include directories, it at least enables us to use object libraries. So this becomes our new minimum required version.
524c1d3c	2017-09-20T07:48:19	Merge pull request #4334 from pks-t/pks/reproducible-builds Reproducible builds
54214d61	2017-09-15T10:28:32	cmake: fix linker error with dbghelper library When the MSVC_CRTDBG option is set by the developer, we will link in the dbghelper library to enable memory lead detection in MSVC projects. We are doing so by adding it to the variable `CMAKE_C_STANDARD_LIBRARIES`, so that it is linked for every library and executable built by CMake. But this causes our builds to fail with a linker error: ``` LINK: fatal error LNK1104: cannot open file 'advapi32.lib;Dbghelp.lib' ``` The issue here is that we are treating the variable as if it were an array of libraries by setting it via the following command: ``` SET(CMAKE_C_STANDARD_LIBRARIES "${CMAKE_C_STANDARD_LIBRARIES}" "Dbghelp.lib") ``` The generated build commands will then simply stringify the variable, concatenating all the contained libraries with a ";". This causes the observed linking failure. To fix the issue, we should just treat the variabable as a simple string. So instead of adding multiple members, we just add the "Dbghelp.lib" library to the existing string, separated by a space character.
d630887b	2017-08-30T21:47:12	cmake: enable reproducible static linking By default, both ar(1) and ranlib(1) will insert additional information like timestamps into generated static archives and indices. As a consequence, generated static archives are not deterministic when created with default parameters. Both programs do support a deterministic mode, which will simply zero out undeterministic information with `ar D` and `ranlib -D`. Unfortunately, CMake does not provide an easy knob to add these command line parameters. Instead, we have to redefine the complete command definitons stored in the variables CMAKE_C_ARCHIVE_CREATE, CMAKE_C_ARCHIVE_APPEND and CMAKE_C_ARCHIVE_FINISH. Introduce a new build option `ENABLE_REPRODUCIBLE_BUILDS`. This option is available on Unix-like systems with the exception of macOS, which does not have support for the required flags. If the option is being enabled, we add those flags to the invocation of both `ar` and `ranlib` to enable deterministically building the static archive.
175ab8e7	2017-08-25T17:36:24	cmake: add switch to build with -Werror Add a simple switch to enable building with "-Werror=<warning>" instead of "-W<warning". Due to the encapsulated `ENABLE_WARNINGS` macro, this is as simple as adding a new variable "ENABLE_WERROR`, which can be passed on the command line via `-DENABLE_WERROR=ON`. The variable defaults to NO to not bother developers in their day to day work.
4a46a8c1	2017-08-25T17:32:54	cmake: encapsulate enabling/disabling compiler warnings There are multiple sites where we enable or disable compiler warning via "-W<warning>" or "-Wno-<warning>". As we want to extend this mechanism later on to conditionally switch these over to "-Werror=<warning>", we encapsulate the logic into its their own macros `ENABLE_WARNINGS` and `DISABLE_WARNINGS`. Note that we in fact have to use a macro here. Using a function would not modify the CFLAGS inside of the callers scope, but in the function's scope only.
e5c9723d	2017-06-30T18:12:02	cmake: move library build instructions into subdirectory To fix leaking build instructions into different targets and to make the build instructions easier to handle, create a new CMakeLists.txt file containing build instructions for the libgit2 target. By now, the split is rather easy to achieve. Due to the preparatory steps, we can now simply move over all related build instructions, only needing to remove the "src/" prefix from some files.
72f27cb6	2017-06-30T17:02:00	cmake: fix up source and binary directory paths There are quite some uses of the variables "${CMAKE_CURRENT_SOURCE_DIR}" and "${CMAKE_CURRENT_BINARY_DIR}" where they are not appropriate. Convert these sites to instead use the variables "${CMAKE_SOURCE_DIR}" and "${CMAKE_BINARY_DIR}", which instead point to the project's root directory. This will ease splitting up the library build instructions into its own subdirectory.
1f43a43d	2017-06-28T13:28:33	cmake: move zlib build instructions into subdirectory Extract code required to build the zlib library into its own CMakeLists.txt, which is included as required.
b7514554	2017-06-28T13:25:09	cmake: move http-parser build instructions into subdirectory Extract code required to build the http-parser library into its own CMakeLists.txt, which is included as required.
9e449e52	2017-06-28T13:23:45	cmake: move regex build instructions into subdirectory Extract code required to build the regex library into its own CMakeLists.txt, which is included as required.
43248500	2017-06-28T13:21:09	cmake: move winhttp build instructions into subdirectory Extract code required to build the winhttp library into its own CMakeLists.txt, which is included as required.
bed7ca3a	2017-06-30T16:57:16	cmake: define WIN_RC with other platform sources This makes splitting up the library build instructions later on more obvious and easier to achieve.
8ee90c39	2017-06-28T13:16:38	cmake: find dependencies after setting build flags This makes splitting up the library build instructions later on more obvious and easier to achieve.
c3635130	2017-06-28T13:14:23	cmake: move definition of Win32 flags together This makes splitting up the library build instructions later on more obvious and easier to achieve.
32a2e500	2017-07-01T13:41:36	cmake: inline TARGET_OS_LIBRARIES function Previous to keeping track of libraries and linking directories via variables, we had two call sites of the `TARGET_OS_LIBRARIES` function to avoid duplicating knowledge on required operating system library dependencies. But as the libgit2_clar target now re-uses defined variables to link against these libraries, we can simply inline the function.
8e31cc25	2017-06-28T12:51:14	cmake: keep track of libraries and includes via lists Later on, we will move detection of required libraries, library directories as well as include directories into a separate CMakeLists.txt file inside of the source directory. Obviously, we want to avoid duplication here regarding these parameters. To prepare for the split, put the parameters into three variables LIBGIT2_LIBS, LIBGIT2_LIBDIRS and LIBGIT2_INCLUDES, tracking the required libraries, linking directory as well as include directories. These variables can later be exported into the parent scope from inside of the source build instructions, making them readily available for the other subdirectories.
dd332e2a	2017-06-23T20:42:41	cmake: use absolute path to deps When refering to files and directories inside of the top-level "deps/" directory, we're being inconsistent in using relative or absolute paths. To enable splitting out parts of the top-level CMakeLists.txt into an own file in the "src/" directory, consistently switch over to use absolute paths to avoid errors when converting.
8341d6cf	2017-07-04T10:57:28	cmake: move regcomp and futimens checks to "features.h" In our CMakeLists.txt, we have to check multiple functions in order to determine if we have to use our own or whether we can use the platform-provided one. For two of these functions, namely `regcomp_l()` and `futimens`, the defined macro is actually used inside of the header file "src/unix/posix.h". As such, these macros are not only required by the library, but also by our test suite, which is makes use of internal headers. To prepare for the CMakeLists.txt split, move these two defines inside of the "features.h" header.
a390a846	2017-07-01T13:06:00	cmake: move defines into "features.h" header In a future commit, we will split out the build instructions for our library directory and move them into a subdirectory. One of the benefits is fixing scoping issues, where e.g. defines do not leak to build targets where they do not belong to. But unfortunately, this does also pose the problem of how to propagate some defines which are required by both the library and the test suite. One way would be to create another variable keeping track of all added defines and declare it inside of the parent scope. While this is the most obvious and simplest way of going ahead, it is kind of unfortunate. The main reason to not use this is that these defines become implicit dependencies between the build targets. By simply observing a define inside of the CMakeLists.txt file, one cannot reason whether this define is only required by the current target or whether it is required by different targets, as well. Another approach would be to use an internal header file keeping track of all defines shared between targets. While configuring the library, we will set various variables and let CMake configure the file, adding or removing defines based on what has been configured. Like this, one can easily keep track of the current environment by simply inspecting the header file. Furthermore, these dependencies are becoming clear inside the CMakeLists.txt, as instead of simply adding a define, we now call e.g. `SET(GIT_THREADSAFE 1)`. Having this header file though requires us to make sure it is always included before any "#ifdef"-preprocessor checks are executed. As we have already refactored code to always include the "common.h" header file before any statement inside of a file, this becomes easy: just make sure "common.h" includes the new "features.h" header file first.
35087f0e	2017-06-28T15:42:54	cmake: create separate CMakeLists.txt for tests Our CMakeLists.txt is very unwieldy in its current size, spanning more than 700 lines of code. Furthermore, it has several issues regarding scoping, where for example some defines, includes, etc. from our test suite are also applied to our normal library code. To fix this, we can separate out build instructions for our tests and move them into their own CMakeLists.txt in the "tests" directory. This reduced complexity of the root CMakeLists.txt file and fixes the issues regarding leaking build context from tests into the library.
3267115f	2017-06-28T15:41:15	cmake: create own precompiled headers for tests As soon as we split up our CMakeBuild.txt build instructions, we will be unable to simply link against the git2 library's precompiled header from other targets. To avoid this future breakage, create a new precompiled header for our test suite. Next to being compatible with the split, this enables us to also include additional files like the clar headers, which may help speeding up compilation of the test suite.
caab8270	2017-06-23T19:07:01	cmake: create object library target Currently, we're compiling our library code twice, once as part of the libgit2 library and once for the libgit2_clar executable. Since CMake 2.8.8, there exists a new library type OBJECT, which represents an intermediate target which can then subsequently be used when linking several targets against the same set of objects. Use an OBJECT library to create an internal library for linking. This new target is only used on CMake v2.8.8 or newer. As CMake 3.0 changed the way how generator expressions are evaluated when accessing properties, we need to enable CMake policy 0051 to keep `IDE_SPLIT_SOURCES` functioning.
f33911e5	2017-06-23T18:32:48	cmake: remove unused variable "CLAR_RESOURCES" Once upon a time, the `CLAR_RESOURCES` variable was intended to set the `CLAR_RESOURCES` define. But actually, the define uses a wrong variable name by accident, hinting that its value cannot actually be used at all, as it is empty. Searching through the code base confirms the guess that the define is not used at all. Remove both the variable and definition.
096a49c0	2017-07-03T08:45:57	cmake: try to detect threads library While we already make use of the variable `${CMAKE_THREAD_LIBS_INIT}`, it is actually undefined due to us never including the "FindThreads" module in the CMakeLists.txt. It is rather curious as to why this has never triggered any error up to now, but it does in fact result in linking errors on some Unix platforms as soon as we split up our build instructions into multiple files. Fix the issue now to avoid future breakage by including the "FindThreads" module.
56893bb9	2017-06-28T12:11:44	cmake: consistently use TARGET_INCLUDE_DIRECTORIES if available Instead of using INCLUDE_DIRECTORIES again for the libgit2_clar test suite, we should just be using TARGET_INCLUDE_DIRECTORIES again if the CMake version is greater than 2.8.11.
22de81e6	2017-06-21T08:25:36	cmake: use `target_include_directories` for modern cmake Apply `target_include_directories` when CMAKE_VERSION >= 2.8.12
6b2133b4	2017-06-27T12:46:15	Merge pull request #4235 from pks-t/pks/out-of-tree-builds Out of tree builds
4305fcca	2017-05-10T12:14:36	cmake: generate clar.suite in binary directory Change the output path of generate.py to generate the clar.suite file inside of the binary directory. This fixes out of tree builds with read-only source trees as we now refrain from writing anything into the source tree.
845f661d	2017-06-21T20:02:48	cmake: Permit disabling external http-parser When attempting to build libgit2 as an isolated static lib, CMake gleefully attempts to use the system http-parser. This is typically seen on Linux systems which install header files with every package, such as Gentoo. Allow developers to forcibly disable using the system http-parser with the config switch USE_EXT_HTTP_PARSER. Defaults to ON to maintain previous behavior. Signed-off-by: Jason Cooper <jason@lakedaemon.net>
a64532e1	2017-06-13T11:05:09	cmake: disable optimization on debug builds While our debug builds on MSVC platforms already tune the code optimizer to aid debugging code, all the other platforms still use the default optimization level. This makes it hard for developers on these platforms to actually debug code while maintaining his sanity due to optimizations like inlined code, elided variables etc. To help this common use case, we can simply follow the MSVC example and turn off code optimization with "-O0" for debug builds. While it would be preferable to instead use "-Og" supported by more modern compilers, we cannot guarantee that this level is available on all supported platforms.
61399953	2017-06-13T11:03:38	cmake: set "-D_DEBUG" on non-Windows platforms In our code base, we have some occasions where we use the "_DEBUG" preprocessor macro to enable additional code which should not be part of release builds. While we define this flag on MSVC platforms, it is guarded by the conditional `WIN32 AND NOT CYGWIN` on other platforms since 19be3f9e6 (Improve MSVC compiler, linker flags, 2013-02-13). While this condition can be fulfilled by the MSVC platform, it is never encountered due to being part of the `ELSE` part of `IF (MSVC)`. The intention of the conditional was most likely to avoid the preprocessor macro on Cygwin platforms, but to include it on everthing else. As such, the correct condition here would be `IF (NOT CYGWIN)` instead. But digging a bit further, the condition is only ever used in two places: 1. To skip the test in "core::structinit", which should also work on Cygwin. 2. In "src/win32/git2.rc", where it is used to set additional file flags. As this file is included in MSVC builds only, it cannot cause any harm to set "_DEBUG" on Cygwin here. As such, we can simply drop the conditional and always set "-D_DEBUG" on all platforms.
e94be4c0	2017-06-13T11:08:19	cmake: remove stale comment on precompiled headers In commit 9f75a9ce7 (Turning on runtime checks when building debug under MSVC., 2012-03-30), we introduced a comment "Precompiled headers", which actually refers to no related commands. Seeing that the comment never had anything to refer to, we can simply remove it here.
db1abffa	2017-06-07T14:59:38	sha1dc: do not use standard includes The updated SHA1DC library allows us to use custom includes instead of using standard includes. Due to requirements with cross-platform, we provide some custom system includes files like for example the "stdint.h" file on Win32. Because of this, we want to make sure to avoid breaking cross-platform compatibility when SHA1DC is enabled. To use the new mechanism, we can simply define `SHA1DC_NO_STANDARD_INCLUDES`. Furthermore, we can specify custom include files via two defines, which we now use to include our "common.h" header.
f218508f	2017-06-07T10:54:48	ctest: temporarily disable UNC path tests (Temporarily) disable UNC path tests to work around AppVeyor issues.
a4de1ae3	2017-04-25T10:14:19	cmake: define GIT_HTTPS when HTTPS is supported
9f128d2a	2017-03-02T20:56:47	cmake: drop unset `SHA1_TYPE` We never set `SHA1_TYPE` to `builtin`. Don't bother testing for it.
2dfd1294	2017-02-24T13:34:01	hash: include sha1collisiondetection Include the SHA1 collision attack detection library from https://github.com/cr-marcstevens/sha1collisiondetection

071750a3

2019-08-15T14:18:26

cmake: move _WIN32_WINNT definitions to root

d827b11b

2019-06-28T13:20:54

tests: execute leak checker via CTest directly Right now, we have an awful hack in our test CI setup that extracts the test command from CTest's output and then prepends the leak checker. This is dependent on non-machine-parseable output from CMake and also breaks on various ocassions, like for example when we have spaces in the current path or when the path contains backslashes. Both conditions may easily be triggered on Win32 systems, and in fact they do break our Azure Pipelines builds. Remove the awful hack in favour of a new CMake build option "USE_LEAK_CHECKER". If specifying e.g. "-DUSE_LEAK_CHECKER=valgrind", then we will set up all tests to be run under valgrind. Like this, we can again simply execute ctest without needing to rely on evil sourcery.

54a60ced

2019-06-15T21:45:26

mingw: disable format specification warnings MinGW uses gcc, which expects POSIX formatting for printf, but uses the Windows C library, which uses its own format specifiers. Therefore, it gets confused about format specifiers. Disable warnings for format specifiers.

e61b92e0

2019-06-24T15:22:39

clang: disable documentation-deprecated-sync Add the `-Wno-documentation-deprecated-sync` switch when compiling with clang, since our documentation adds `deprecated` markers, but we do not add the deprecation attribute in the code itself. (ie, the code is out of sync with the docs). In fact, we do not _want_ to mark these items as deprecated in the code, at least not yet, as we are not quite ready to bother our end-users with this since they're not going away.

393fb8a1

2019-06-17T12:15:19

cmake: default NTLM client to off if no HTTPS support If building libgit2 with `-DUSE_HTTPS=NO`, then CMake will generate an error complaining that there's no usable HTTPS backend for NTLM. In fact, it doesn't make sense to support NTLM when we don't support HTTPS. So let's should just have NTLM default to OFF when HTTPS is disabled to make life easier and to fix our OSSFuzz builds failing.

94fc83b6

2019-06-13T16:48:35

cmake: Modulize our TLS & hash detection The interactions between `USE_HTTPS` and `SHA1_BACKEND` have been streamlined. Previously we would have accepted not quite working configurations (like, `-DUSE_HTTPS=OFF -DSHA1_BACKEND=OpenSSL`) and, as the OpenSSL detection only ran with `USE_HTTPS`, the link would fail. The detection was moved to a new `USE_SHA1`, modeled after `USE_HTTPS`, which takes the values "CollisionDetection/Backend/Generic", to better match how the "hashing backend" is selected, the default (ON) being "CollisionDetection". Note that, as `SHA1_BACKEND` is still used internally, you might need to check what customization you're using it for.

fb529a01

2019-06-11T22:03:29

http-parser: use our bundled http-parser by default Our bundled http-parser includes bugfixes, therefore we should prefer our http-parser until such time as we can identify that the system http-parser has these bugfixes (using a version check). Since these bugs are - at present - minor, retain the ability for users to force that they want to use the system http-parser anyway. This does change the cmake specification so that people _must_ opt-in to the new behavior knowingly.

a7f65f03

2019-03-21T15:42:57

ntlm: add ntlmclient as a dependency Include https://github.com/ethomson/ntlmclient as a dependency.

ac2b235e

2019-05-21T12:22:40

regex: use REGEX_BACKEND as the cmake option name This avoids any misunderstanding with the REGEX keyword in cmake.

ce6d624a

2019-05-19T10:30:04

regex: optionally use PCRE2 Use PCRE2 and its POSIX compatibility layer if requested by the user. Although PCRE2 is adequate for our needs, the PCRE2 POSIX layer as installed on Debian and Ubuntu systems is broken, so we do not opt-in to it by default to avoid breaking users on those platforms.

c6e48fef

2019-02-17T21:51:34

regex: allow regex selection in cmake Users can now select which regex implementation they want to use: one of the system `regcomp_l`, the system PCRE, the builtin PCRE or the system's `regcomp`. By default the system `regcomp_l` will be used if it exists, otherwise the system PCRE will be used. If neither of those exist, then the builtin PCRE implementation will be used. The system's `regcomp` is not used by default due to problems with locales.

dcf81cdb

2019-02-13T23:56:40

deprecation: optionally enable hard deprecation Add a CMake option to enable hard deprecation; the resultant library will _not_ include any deprecated functions. This may be useful for internal CI builds that create libraries that are not shared with end-users to ensure that we do not use deprecated bits internally.

24ac9e0c

2019-02-13T23:26:54

deprecation: ensure we GIT_EXTERN deprecated funcs Although the error functions were deprecated, we did not properly mark them as deprecated. We need to include the `deprecated.h` file in order to ensure that the functions get their export attributes. Similarly, do not define `GIT_DEPRECATE_HARD` within the library, or those functions will also not get their export attributes. Define that only on the tests and examples.

7ed2baf7

2019-01-21T00:41:50

MSVC: ignore empty compilation units (warning LNK4221) A number of source files have their implementation #ifdef'd out (because they target another platform). MSVC warns on empty compilation units (with warning LNK4221). Ignore warning 4221 when creating the object library.

c951b825

2019-01-23T00:32:40

deprecation: define GIT_DEPRECATE_HARD internally Ensure that we do not use any deprecated functions in the library source, test code or examples.

57b753a0

2019-01-09T12:47:40

cmake: error when STDCALL is specified To explicitly break end-users who were specifying STDCALL, explicitly fail the cmake process to ensure that they know that they need to change their bindings. Otherwise, we would quietly ignore their option and the resulting cdecl library would produced undefined behavior.

a74dd39b

2019-01-09T12:33:47

Use cdecl calling conventions on Win32 The recommendation from engineers within Microsoft is that libraries should have a calling convention specified in the public API, and that calling convention should be cdecl unless there are strong reasons to use a different calling convention. We previously offered end-users the choice between cdecl and stdcall calling conventions. We did this for presumed wider compatibility: most Windows applications will use cdecl, but C# and PInvoke default to stdcall for WINAPI compatibility. (On Windows, the standard library functions are are stdcall so PInvoke also defaults to stdcall.) However, C# and PInvoke can easily call cdecl APIs by specifying an annotation. Thus, we will explicitly declare ourselves cdecl and remove the option to build as stdcall.

2cc66dd5

2019-01-10T17:03:38

cmake: remove unconditional -Wno-deprecated-declaration on APPLE After taking into consideration the following, I think this should be removed : - OpenSSL isn't the default on Apple platforms - you have to jump through hoops to get CMake to use OpenSSL on macOS (headers aren't in `/usr/include`, so you have to provide `-DOPENSSL_*` overrides) - users are likely (as getting anywhere near the installed 0.9.8 version is insanity IMHO) to package a "modern" version, which wouldn't be marked as deprecated

487233fa

2018-11-29T07:21:41

Merge pull request #4895 from pks-t/pks/unused-warnings Unused function warnings

3a2e4836

2018-11-18T09:52:12

CMake: disable deprecated documentation sync The `-Wdocumentation-deprecated-sync` option will warn when there is a doxygen `\deprecated` tag but there is no corresponding deprecation attribute on the function. We want to encourage users to not use particular APIs by marking them deprecated in the documentation without necessarily raising a compiler warning by marking an item as deprecated.

21142c5a

2018-10-29T10:04:48

http: remove cURL We previously used cURL to support HTTP proxies. Now that we've added this support natively, we can remove the curl dependency.

ffe39bab

2018-11-23T20:04:37

cmake: enable warnings for unused const variables Together with the warnings for unused warnings, we always had warnings for unused constant variables disabled since commit 823c0e9cc (Fix broken logic for attr cache invalidation, 2014-04-17). As we have now fixed all occurrences of such variables, we can safely enable those warnings again.

681c58cf

2018-11-21T11:21:02

cmake: enable warnings for unused functions Ever since commit 823c0e9cc (Fix broken logic for attr cache invalidation, 2014-04-17), we have completely disabled warnings for unused functions. The only comment that was added back then is about "annoying extra warnings" from Clang, but in fact we shouldn't just ignore warnings about functions which aren't used at all. Instead, the right thing would be to either only conditionally compile functions that aren't used in all configurations or, alternatively, to remove functions that aren't required at all. As remaining instances of unused functions have been removed in the last two commits, re-enable the warning.

b160a64f

2018-10-17T09:38:30

cmake: correct comment from libssh to libssh2 We use libssh2. We do not use libssh. Make sure to disambiguate them correctly.

aa0ae59a

2018-10-05T10:31:53

cmake: explicitly enable int-conversion warnings While GCC enables int-conversion warnings by default, it will currently only warn about such errors even in case where "-DENABLE_WERROR=ON" has been passed to CMake. Explicitly enable int-conversion warnings by using our `ENABLE_WARNINGS` macro, which will automatically use "-Werror=int-conversions" in case it has been requested by the user.

633584b5

2018-10-04T10:48:12

cmake: enable new quoted argument policy CMP0054 Quoting from CMP0054's documentation: Only interpret if() arguments as variables or keywords when unquoted. CMake 3.1 and above no longer implicitly dereference variables or interpret keywords in an if() command argument when it is a Quoted Argument or a Bracket Argument. The OLD behavior for this policy is to dereference variables and interpret keywords even if they are quoted or bracketed. The NEW behavior is to not dereference variables or interpret keywords that have been quoted or bracketed. The previous behaviour could be quite unexpected. Quoted arguments might be expanded in case where the value of the argument corresponds to a variable. E.g. `IF("MONKEY" STREQUAL "MONKEY")` would have been expanded to `IF("1" STREQUAL "1")` iff `SET(MONKEY 1)` was set. This behaviour was weird, and recent CMake versions have started to complain about this if they see ambiguous situations. Thus we want to disable it in favor of the new behaviour.

04d3853f

2018-10-04T10:47:29

cmake: remove spaces between `IF` and `(` for policies Our CMake coding style dictates that there should be no space between `IF` and its opening `(`. Adjust our policy statements to honor this style.

1621a37d

2018-09-29T13:22:59

Merge pull request #4812 from libgit2/ethomson/ci-refactor CI: refactoring

f2c1153d

2018-09-17T20:38:05

cmake: enable -Wformat and -Wformat-security We do not currently have any warnings in this regard, but it's good practice to have them on in case we introduce something.

943181c2

2018-09-10T12:36:51

Revert "clar: introduce CLAR_XML option" This reverts commit a2d73f5643814cddf90d5bf489332e14ada89ab8. Using clar to propagate the XML settings was a mistake.

a2d73f56

2018-08-24T11:23:19

clar: introduce CLAR_XML option Introduce a CLAR_XML option, to run the `ctest` commands with the new `-r` flag to clar. Permitted values are `OFF`, `ON` and a directory to write the XML test results to.

1a9cc182

2018-08-17T15:56:30

util: make the qsort_r check work on macOS This performs a compile-check by using CMake support, to differentiate the GNU version from the BSD version of qsort_r. Module taken from 4f252abea5f1d17c60f6ff115c9c44cc0b6f1df6, which I've checked against CMake 2.8.11.

12804c46

2018-07-20T12:24:08

cmake: remove USE_SANITIZER and USE_COVERAGE options Both the USE_SANITIZER and USE_COVERAGE options are convenience options that turn on a set of CFLAGS. Despite our own set of CFLAGS required to build libgit2, we have no real business to mess with them, though, as they can easily be passed in by the user via specifying the CFLAGS environment variable. The reasoning behind not providing them is that as soon as we start adding those for some usecases, users might ask for other sets of CFLAGS catering to their specific need in another usecase. Thus, we do not want to support them here.

ad0cb297

2018-07-20T12:17:42

cmake: fix the unholy options alignment mess

186a7ba5

2018-07-19T15:13:40

cmake: error out if required C flags are not supported We do want to notify users compiling our source code early on if they try to use C flags which aren't supported. Add a new macro `AddCFlag`, which results in a fatal error in case the flag is not supported, and use it for our fuzzing flags.

59328ed8

2018-07-19T13:29:46

fuzzers: rename "fuzz" directory to match our style Our layout uses names like "examples" or "tests" which is why the "fuzz" directory doesn't really fit in here. Rename the directory to be called "fuzzers" instead. Furthermore, we rename the fuzzer "fuzz_packfile_raw" to "packfile_raw_fuzzer", which is also in line with the already existing fuzzer at google/oss-fuzz. While at it, rename the "packfile_raw" fuzzer to instead just be called "packfile" fuzzer.

60e610a2

2018-01-04T15:36:22

fuzzers: add build support and instructions This change adds support for building a fuzz target for exercising the packfile parser, as well as documentation. It also runs the fuzzers in Travis to avoid regressions.

e1a4a8eb

2018-06-25T11:58:34

cmake: enforce C90 standard While the aim of libgit2 was to conform to C90 code, we never instructed the compiler to enforce C90 compliance. Thus, quite a few violations were able to get into our code base, which have been removed with the previous commits. As we are now able to build libgit2 with C90 enforced, we can set the C_STANDARD property for our own build targets. Note that we explicitly avoid setting the C standard for our third-party dependencies. At least the zlib target does not build with C90 enforced, and we do not want to fix them by deviating from upstream. Thus we simply enforce no standard for them.

0f62e4c7

2018-04-27T10:38:49

cmake: resolve libraries found by pkg-config Libraries found by CMake modules are usually handled with their full path. This makes linking against those libraries a lot more robust when it comes to libraries in non-standard locations, as otherwise we might mix up libraries from different locations when link directories are given. One excemption are libraries found by PKG_CHECK_MODULES. Instead of returning libraries with their complete path, it will return the variable names as well as a set of link directories. In case where multiple sets of the same library are installed in different locations, this can lead the compiler to link against the wrong libraries in the end, when link directories of other dependencies are added. To fix this shortcoming, we need to manually resolve library paths returned by CMake against their respective library directories. This is an easy task to do with `FIND_LIBRARY`.

6c6be3ce

2018-03-29T22:13:59

mbedtls: use libmbedcrypto for hashing

e666495b

2018-03-08T08:31:49

cmake: enable shift count overflow warning

522f3e4b

2018-02-16T10:50:54

CMakeLists: increase strict aliasing level to 3 The strict aliasing rules disallow dereferencing the pointer to a variable of a certain type as another type, which is frequently used e.g. when casting structs to their base type. We currently have the warning level for strict aliasing rules set to `2`, which is described by gcc(1) as being "Aggressive, quick, not too precise." And in fact, we experience quite a lot of warnings when doing a release build due to that. GCC provides multiple levels, where higher levels are more accurate, but also slower due to the additional analysis required. Still, we want to have warning level 3 instead of 2 to avoid the current warnings we have in the Travis CI release builds. As this is the default warning level when no level is passed to `-Wstrict-aliasing`, we can just remove the level and use that default.

f8a2dda8

2018-02-05T15:21:37

cmake: move ENABLE_WARNINGS to a module

fc6e38c2

2018-02-02T18:03:38

cmake: Move IDE source munging to a module Move the odd code that provides a hierarchical display for projects within the IDEs to its own module.

ed298c8e

2018-02-02T18:01:51

cmake: move nanosecond detection to a module Move the nanosecond detection in time structures to its own module.

6416b91f

2018-02-02T17:58:44

cmake: enable policy CMP0042 Enable CMake policy CMP0042, if supported: > CMake 2.8.12 and newer has support for using ``@rpath`` in a target's > install name. This was enabled by setting the target property > ``MACOSX_RPATH``. The ``@rpath`` in an install name is a more > flexible and powerful mechanism than ``@executable_path`` or > ``@loader_path`` for locating shared libraries.

94aa36ef

2018-02-02T17:56:15

cmake: test for CMP0051 instead of version check We can use policy checks to see if a policy exists in cmake, like CMP0051, instead of relying on the version.

6d452600

2018-01-10T11:52:15

cmake: use a FEATURE_SUMMARY call compatible with 3.0.2 When we print features, we make an effort to support all the way back to pre-3.0. However, in the code for versions from 3 onward we call `FEATURE_SUMMARY` with multiple kinds of elements to print in the same line. This is only supported in CMake 3.1 and later, making the rather popular CMake 3.0.2 unable to build the library. Use a single kind of element per invocation. This means we need to provide a "description" text, which CMake provides for us if provide multiple kinds of elements.

ddd36510

2018-01-07T15:40:06

Merge pull request #4467 from libgit2/cmn/static-archive-later cmake: move the rule to find static archives close to building clar

85e40bbf

2018-01-07T12:51:26

cmake: move the rule to find static archives close to building clar If we're building static libraries, we want to use that for building our clar binary. This is done in 49551254 (2017-09-22; cmake: use static dependencies when building static libgit2) but that commit included the rule too early, making it affect the search for iconv, meaning we did not find it when we were building a static libgit2. Move the rule to just before building clar, after we've included the rules for building the library itself. This lets us find and link to the dynamic libiconv.

70aa6146

2017-12-05T08:48:31

cmake: allow explicitly choosing SHA1 backend Right now, if SHA1DC is disabled, the SHA1 backend is mostly chosen based on which system libgit2 is being compiled on and which libraries have been found. To give developers and distributions more choice, enable them to request specific backends by passing in a `-DSHA1_BACKEND=<BACKEND>` option instead. This completely replaces the previous auto-selection.

e7495ce6

2017-12-05T08:47:57

cmake: default to using SHA1DC Upstream git.git has changed their default SHA1 implementation to the collision-detection algorithm SHA1DC in commit e6b07da27 (Makefile: make DC_SHA1 the default, 2017-03-17). To match upstream, align ourselves and switch over to SHA1DC by default.

bbb213c1

2017-11-11T13:19:24

cmake: let USE_ICONV be optional on macOS Instead of forcing iconv support on macOS (by forcing `USE_ICONV` on), honor the `USE_ICONV` option only on macOS. Although macOS includes iconv by default, some macOS users may have a deficient installation for some reason and they should be provided a workaround to use libgit2 even in this situation. iconv support is now disabled entirely on non-macOS platforms. No other platform supports core.precomposeunicode, and iconv should never be linked.

a0b0b808

2017-11-11T14:03:14

cmake: Allow user to select bundled zlib Under some circumstances the installed / system version of zlib may not be desirable due to being too old or buggy. This patch adds the option `USE_BUNDLED_ZLIB` that will cause the bundled version of zlib to be used. We may also want to add similar functionality to allow the user to select other bundled 3rd-party dependencies instead of using the system versions. /cc @pks-t @ethomson

c9bb68c2

2017-09-07T00:41:54

cmake: move Darwin-specific block around This allows us to only link against CoreFoundation when using the SecureTransport backend

9980be03

2017-09-06T22:13:58

cmake: Add USE_HTTPS as a CMake option It defaults to ON, e.g. "pick whatever default is appropriate for the platform". It accepts one of SecureTransport, OpenSSL, WinHTTP, or OFF. It errors if the backend library couldn't be found.

10b25dbf

2017-08-10T00:03:30

cmake: braces are not needed here

fdd06874

2017-08-09T21:35:53

cmake: use FeatureSummary to display which features we end up using

4da74c83

2017-10-20T07:29:17

cmake: use project-relative binary and source directories Due to our split of CMake files into multiple modules, we had to replace some uses of the `${CMAKE_CURRENT_SOURCE_DIR}` and `${CMAKE_CURRENT_BINARY_DIR}` variables and replace them with `${CMAKE_SOURCE_DIR}` and `${CMAKE_BINARY_DIR}`. This enabled us to still be able to refer to top-level files when defining build instructions inside of a subdirectory. When replacing all variables, it was assumed that the absolute set of variables is always relative to the current project. But in fact, this is not the case, as these variables always point to the source and binary directory as given by the top-levl project. So the change actually broke the ability to include libgit2 directly as a subproject, as source files cannot be found anymore. Fix this by instead using project-specific source and binary directories with `${libgit2_SOURCE_DIR}` and `${libgit2_BINARY_DIR}`.

8bbee8f3

2017-10-14T08:36:54

Fix compilation for CMake versions 3.0.x where x >= 1 Apparently policy CMP0015 was added in CMake 3.1. With CMake 3.0.2, the build was failing with CMake Error at CMakeLists.txt:18 (CMAKE_POLICY): Policy "CMP0051" is not known to this version of CMake. This patch makes it work.

8ac8c78c

2017-10-09T15:15:08

Merge pull request #4356 from pks-t/pks/static-clar cmake: use static dependencies when building static libgit2

49551254

2017-09-22T09:34:37

cmake: use static dependencies when building static libgit2 CMake allows us to build a static library by simply setting the variable `BUILD_SHARED_LIBS` to `OFF`. While this causes us to create a static libgit2.a archive, it will not automatically cause CMake to only locate static archives when searching for dependencies. This does no harm in case of building our libgit2.a, as we do not want to include all required dependencies in the resulting archive anyway. Instead, we ask users of a static libgit2.a to link against the required set of static archives themselves, typically aided by the libgit2.pc file. Where it does cause harm, though, is when we build the libgit2_clar test suite. CMake has happily populated our LIBGIT2_LIBS variable with shared libraries, and so linking the final libgit2_clar test does not do the right thing. It will simply ignore those shared libraries, we end up with a test suite with undefined symbols. To fix the issue, we can instruct CMake to only locate libraries with a certain suffix. As static libraries are typically identifiable by their ".a" suffix on Unix-based systems, we can instruct CMake to only locate libraries with this suffix to restrict it from finding any shared libraries. This fixes building a static libgit2_clar test suite. Note that this ignores the problem on Windows. The problem here is that we cannot even distinguish static and dynamic libraries by only inspecting their suffix. So we just ignore the problem on Windows, for now.

cf9f3452

2017-09-06T07:38:32

cmake: bump minimum version to 2.8.11 Our current minimum CMake version is 2.8. This version does not yet allow us to use object libraries (introduced in 2.8.8) and target include directories (introduced in 2.8.12), which are both mechanisms we want to use to fix some specific problems. We previously were not able to bump our CMake version to a version supporting object libraries because Ubuntu Precise only had CMake version 2.8.7 in its repositories. But due to Precise being end of life now, we shouldn't need to honor it anymore. A current survey of some of the more conservative distributions brings up the following versions of CMake: - CentOS 5: 2.6.2 - CentOS 6: 2.8.12.2 - Debian 7: 2.8.11 - Fedora 23: 3.3.2 - OpenSUSE 13.2: 3.0.2 - Ubuntu Precise: 2.8.7 - Ubuntu Trusty: 2.8.12 The only two outliers here are CentOS 5 and Ubuntu Precise. CentOS is currently unsupported due to our minimum version being 2.8 and Ubuntu Precise is not maintained anymore. So the next smallest version supported by all major distributions is 2.8.11. While this does not yet support target include directories, it at least enables us to use object libraries. So this becomes our new minimum required version.

524c1d3c

2017-09-20T07:48:19

Merge pull request #4334 from pks-t/pks/reproducible-builds Reproducible builds

54214d61

2017-09-15T10:28:32

cmake: fix linker error with dbghelper library When the MSVC_CRTDBG option is set by the developer, we will link in the dbghelper library to enable memory lead detection in MSVC projects. We are doing so by adding it to the variable `CMAKE_C_STANDARD_LIBRARIES`, so that it is linked for every library and executable built by CMake. But this causes our builds to fail with a linker error: ``` LINK: fatal error LNK1104: cannot open file 'advapi32.lib;Dbghelp.lib' ``` The issue here is that we are treating the variable as if it were an array of libraries by setting it via the following command: ``` SET(CMAKE_C_STANDARD_LIBRARIES "${CMAKE_C_STANDARD_LIBRARIES}" "Dbghelp.lib") ``` The generated build commands will then simply stringify the variable, concatenating all the contained libraries with a ";". This causes the observed linking failure. To fix the issue, we should just treat the variabable as a simple string. So instead of adding multiple members, we just add the "Dbghelp.lib" library to the existing string, separated by a space character.

d630887b

2017-08-30T21:47:12

cmake: enable reproducible static linking By default, both ar(1) and ranlib(1) will insert additional information like timestamps into generated static archives and indices. As a consequence, generated static archives are not deterministic when created with default parameters. Both programs do support a deterministic mode, which will simply zero out undeterministic information with `ar D` and `ranlib -D`. Unfortunately, CMake does not provide an easy knob to add these command line parameters. Instead, we have to redefine the complete command definitons stored in the variables CMAKE_C_ARCHIVE_CREATE, CMAKE_C_ARCHIVE_APPEND and CMAKE_C_ARCHIVE_FINISH. Introduce a new build option `ENABLE_REPRODUCIBLE_BUILDS`. This option is available on Unix-like systems with the exception of macOS, which does not have support for the required flags. If the option is being enabled, we add those flags to the invocation of both `ar` and `ranlib` to enable deterministically building the static archive.

175ab8e7

2017-08-25T17:36:24

cmake: add switch to build with -Werror Add a simple switch to enable building with "-Werror=<warning>" instead of "-W<warning". Due to the encapsulated `ENABLE_WARNINGS` macro, this is as simple as adding a new variable "ENABLE_WERROR`, which can be passed on the command line via `-DENABLE_WERROR=ON`. The variable defaults to NO to not bother developers in their day to day work.

4a46a8c1

2017-08-25T17:32:54

cmake: encapsulate enabling/disabling compiler warnings There are multiple sites where we enable or disable compiler warning via "-W<warning>" or "-Wno-<warning>". As we want to extend this mechanism later on to conditionally switch these over to "-Werror=<warning>", we encapsulate the logic into its their own macros `ENABLE_WARNINGS` and `DISABLE_WARNINGS`. Note that we in fact have to use a macro here. Using a function would not modify the CFLAGS inside of the callers scope, but in the function's scope only.

e5c9723d

2017-06-30T18:12:02

cmake: move library build instructions into subdirectory To fix leaking build instructions into different targets and to make the build instructions easier to handle, create a new CMakeLists.txt file containing build instructions for the libgit2 target. By now, the split is rather easy to achieve. Due to the preparatory steps, we can now simply move over all related build instructions, only needing to remove the "src/" prefix from some files.

72f27cb6

2017-06-30T17:02:00

cmake: fix up source and binary directory paths There are quite some uses of the variables "${CMAKE_CURRENT_SOURCE_DIR}" and "${CMAKE_CURRENT_BINARY_DIR}" where they are not appropriate. Convert these sites to instead use the variables "${CMAKE_SOURCE_DIR}" and "${CMAKE_BINARY_DIR}", which instead point to the project's root directory. This will ease splitting up the library build instructions into its own subdirectory.

1f43a43d

2017-06-28T13:28:33

cmake: move zlib build instructions into subdirectory Extract code required to build the zlib library into its own CMakeLists.txt, which is included as required.

b7514554

2017-06-28T13:25:09

cmake: move http-parser build instructions into subdirectory Extract code required to build the http-parser library into its own CMakeLists.txt, which is included as required.

9e449e52

2017-06-28T13:23:45

cmake: move regex build instructions into subdirectory Extract code required to build the regex library into its own CMakeLists.txt, which is included as required.

43248500

2017-06-28T13:21:09

cmake: move winhttp build instructions into subdirectory Extract code required to build the winhttp library into its own CMakeLists.txt, which is included as required.

bed7ca3a

2017-06-30T16:57:16

cmake: define WIN_RC with other platform sources This makes splitting up the library build instructions later on more obvious and easier to achieve.

8ee90c39

2017-06-28T13:16:38

cmake: find dependencies after setting build flags This makes splitting up the library build instructions later on more obvious and easier to achieve.

c3635130

2017-06-28T13:14:23

cmake: move definition of Win32 flags together This makes splitting up the library build instructions later on more obvious and easier to achieve.

32a2e500

2017-07-01T13:41:36

cmake: inline TARGET_OS_LIBRARIES function Previous to keeping track of libraries and linking directories via variables, we had two call sites of the `TARGET_OS_LIBRARIES` function to avoid duplicating knowledge on required operating system library dependencies. But as the libgit2_clar target now re-uses defined variables to link against these libraries, we can simply inline the function.

8e31cc25

2017-06-28T12:51:14

cmake: keep track of libraries and includes via lists Later on, we will move detection of required libraries, library directories as well as include directories into a separate CMakeLists.txt file inside of the source directory. Obviously, we want to avoid duplication here regarding these parameters. To prepare for the split, put the parameters into three variables LIBGIT2_LIBS, LIBGIT2_LIBDIRS and LIBGIT2_INCLUDES, tracking the required libraries, linking directory as well as include directories. These variables can later be exported into the parent scope from inside of the source build instructions, making them readily available for the other subdirectories.

dd332e2a

2017-06-23T20:42:41

cmake: use absolute path to deps When refering to files and directories inside of the top-level "deps/" directory, we're being inconsistent in using relative or absolute paths. To enable splitting out parts of the top-level CMakeLists.txt into an own file in the "src/" directory, consistently switch over to use absolute paths to avoid errors when converting.

8341d6cf

2017-07-04T10:57:28

cmake: move regcomp and futimens checks to "features.h" In our CMakeLists.txt, we have to check multiple functions in order to determine if we have to use our own or whether we can use the platform-provided one. For two of these functions, namely `regcomp_l()` and `futimens`, the defined macro is actually used inside of the header file "src/unix/posix.h". As such, these macros are not only required by the library, but also by our test suite, which is makes use of internal headers. To prepare for the CMakeLists.txt split, move these two defines inside of the "features.h" header.

a390a846

2017-07-01T13:06:00

cmake: move defines into "features.h" header In a future commit, we will split out the build instructions for our library directory and move them into a subdirectory. One of the benefits is fixing scoping issues, where e.g. defines do not leak to build targets where they do not belong to. But unfortunately, this does also pose the problem of how to propagate some defines which are required by both the library and the test suite. One way would be to create another variable keeping track of all added defines and declare it inside of the parent scope. While this is the most obvious and simplest way of going ahead, it is kind of unfortunate. The main reason to not use this is that these defines become implicit dependencies between the build targets. By simply observing a define inside of the CMakeLists.txt file, one cannot reason whether this define is only required by the current target or whether it is required by different targets, as well. Another approach would be to use an internal header file keeping track of all defines shared between targets. While configuring the library, we will set various variables and let CMake configure the file, adding or removing defines based on what has been configured. Like this, one can easily keep track of the current environment by simply inspecting the header file. Furthermore, these dependencies are becoming clear inside the CMakeLists.txt, as instead of simply adding a define, we now call e.g. `SET(GIT_THREADSAFE 1)`. Having this header file though requires us to make sure it is always included before any "#ifdef"-preprocessor checks are executed. As we have already refactored code to always include the "common.h" header file before any statement inside of a file, this becomes easy: just make sure "common.h" includes the new "features.h" header file first.

35087f0e

2017-06-28T15:42:54

cmake: create separate CMakeLists.txt for tests Our CMakeLists.txt is very unwieldy in its current size, spanning more than 700 lines of code. Furthermore, it has several issues regarding scoping, where for example some defines, includes, etc. from our test suite are also applied to our normal library code. To fix this, we can separate out build instructions for our tests and move them into their own CMakeLists.txt in the "tests" directory. This reduced complexity of the root CMakeLists.txt file and fixes the issues regarding leaking build context from tests into the library.

3267115f

2017-06-28T15:41:15

cmake: create own precompiled headers for tests As soon as we split up our CMakeBuild.txt build instructions, we will be unable to simply link against the git2 library's precompiled header from other targets. To avoid this future breakage, create a new precompiled header for our test suite. Next to being compatible with the split, this enables us to also include additional files like the clar headers, which may help speeding up compilation of the test suite.

caab8270

2017-06-23T19:07:01

cmake: create object library target Currently, we're compiling our library code twice, once as part of the libgit2 library and once for the libgit2_clar executable. Since CMake 2.8.8, there exists a new library type OBJECT, which represents an intermediate target which can then subsequently be used when linking several targets against the same set of objects. Use an OBJECT library to create an internal library for linking. This new target is only used on CMake v2.8.8 or newer. As CMake 3.0 changed the way how generator expressions are evaluated when accessing properties, we need to enable CMake policy 0051 to keep `IDE_SPLIT_SOURCES` functioning.

f33911e5

2017-06-23T18:32:48

cmake: remove unused variable "CLAR_RESOURCES" Once upon a time, the `CLAR_RESOURCES` variable was intended to set the `CLAR_RESOURCES` define. But actually, the define uses a wrong variable name by accident, hinting that its value cannot actually be used at all, as it is empty. Searching through the code base confirms the guess that the define is not used at all. Remove both the variable and definition.

096a49c0

2017-07-03T08:45:57

cmake: try to detect threads library While we already make use of the variable `${CMAKE_THREAD_LIBS_INIT}`, it is actually undefined due to us never including the "FindThreads" module in the CMakeLists.txt. It is rather curious as to why this has never triggered any error up to now, but it does in fact result in linking errors on some Unix platforms as soon as we split up our build instructions into multiple files. Fix the issue now to avoid future breakage by including the "FindThreads" module.

56893bb9

2017-06-28T12:11:44

cmake: consistently use TARGET_INCLUDE_DIRECTORIES if available Instead of using INCLUDE_DIRECTORIES again for the libgit2_clar test suite, we should just be using TARGET_INCLUDE_DIRECTORIES again if the CMake version is greater than 2.8.11.

22de81e6

2017-06-21T08:25:36

cmake: use `target_include_directories` for modern cmake Apply `target_include_directories` when CMAKE_VERSION >= 2.8.12

6b2133b4

2017-06-27T12:46:15

Merge pull request #4235 from pks-t/pks/out-of-tree-builds Out of tree builds

4305fcca

2017-05-10T12:14:36

cmake: generate clar.suite in binary directory Change the output path of generate.py to generate the clar.suite file inside of the binary directory. This fixes out of tree builds with read-only source trees as we now refrain from writing anything into the source tree.

845f661d

2017-06-21T20:02:48

cmake: Permit disabling external http-parser When attempting to build libgit2 as an isolated static lib, CMake gleefully attempts to use the system http-parser. This is typically seen on Linux systems which install header files with every package, such as Gentoo. Allow developers to forcibly disable using the system http-parser with the config switch USE_EXT_HTTP_PARSER. Defaults to ON to maintain previous behavior. Signed-off-by: Jason Cooper <jason@lakedaemon.net>

a64532e1

2017-06-13T11:05:09

cmake: disable optimization on debug builds While our debug builds on MSVC platforms already tune the code optimizer to aid debugging code, all the other platforms still use the default optimization level. This makes it hard for developers on these platforms to actually debug code while maintaining his sanity due to optimizations like inlined code, elided variables etc. To help this common use case, we can simply follow the MSVC example and turn off code optimization with "-O0" for debug builds. While it would be preferable to instead use "-Og" supported by more modern compilers, we cannot guarantee that this level is available on all supported platforms.

61399953

2017-06-13T11:03:38

cmake: set "-D_DEBUG" on non-Windows platforms In our code base, we have some occasions where we use the "_DEBUG" preprocessor macro to enable additional code which should not be part of release builds. While we define this flag on MSVC platforms, it is guarded by the conditional `WIN32 AND NOT CYGWIN` on other platforms since 19be3f9e6 (Improve MSVC compiler, linker flags, 2013-02-13). While this condition can be fulfilled by the MSVC platform, it is never encountered due to being part of the `ELSE` part of `IF (MSVC)`. The intention of the conditional was most likely to avoid the preprocessor macro on Cygwin platforms, but to include it on everthing else. As such, the correct condition here would be `IF (NOT CYGWIN)` instead. But digging a bit further, the condition is only ever used in two places: 1. To skip the test in "core::structinit", which should also work on Cygwin. 2. In "src/win32/git2.rc", where it is used to set additional file flags. As this file is included in MSVC builds only, it cannot cause any harm to set "_DEBUG" on Cygwin here. As such, we can simply drop the conditional and always set "-D_DEBUG" on all platforms.

e94be4c0

2017-06-13T11:08:19

cmake: remove stale comment on precompiled headers In commit 9f75a9ce7 (Turning on runtime checks when building debug under MSVC., 2012-03-30), we introduced a comment "Precompiled headers", which actually refers to no related commands. Seeing that the comment never had anything to refer to, we can simply remove it here.

db1abffa

2017-06-07T14:59:38

sha1dc: do not use standard includes The updated SHA1DC library allows us to use custom includes instead of using standard includes. Due to requirements with cross-platform, we provide some custom system includes files like for example the "stdint.h" file on Win32. Because of this, we want to make sure to avoid breaking cross-platform compatibility when SHA1DC is enabled. To use the new mechanism, we can simply define `SHA1DC_NO_STANDARD_INCLUDES`. Furthermore, we can specify custom include files via two defines, which we now use to include our "common.h" header.

f218508f

2017-06-07T10:54:48

ctest: temporarily disable UNC path tests (Temporarily) disable UNC path tests to work around AppVeyor issues.

a4de1ae3

2017-04-25T10:14:19

cmake: define GIT_HTTPS when HTTPS is supported

9f128d2a

2017-03-02T20:56:47

cmake: drop unset `SHA1_TYPE` We never set `SHA1_TYPE` to `builtin`. Don't bother testing for it.

2dfd1294

2017-02-24T13:34:01

hash: include sha1collisiondetection Include the SHA1 collision attack detection library from https://github.com/cr-marcstevens/sha1collisiondetection

thodg/libgit2/CMakeLists.txt

CMakeLists.txt

Log