kmx git

Commit	Date	Message
0a43d7cb	2012-02-25T18:52:28	config: correctly deal with setting a multivar with regex where there are no matches We used to erroneously consider "^$" as a special case for appending a value to a multivar. This was a misunderstanding and we should always append a value if there are no existing values that match. While we're in the area, replace all the variables in-memory in one swoop and then replace them on disk so as to avoid matching a value we've just introduced.
9554cd51	2012-02-24T12:14:26	A remote exists with an URL alone We used to consider it an error if a remote didn't have at least a fetch refspec. This was too much checking, as a remote doesn't in fact need to have anything other than an URL configured to be considered a remote.
1db9d2c3	2012-02-23T17:11:20	Ensure that commits don't fail if committing content that already exists Making a commit that results in a blob that already exists in the ODB (i.e. committing something, then making a revert commit) will result in us trying to p_rename -> MoveFileExW a temp file into the existing ODB entry. Despite the MOVEFILE_REPLACE_EXISTING flag is passed in, Win32 does not care and fails it with STATUS_ACCESS_DENIED. To fix this, we p_unlink the ODB entry before attempting to rename it. This call will typically fail, but we don't care, we'll let the p_rename fail if the file actually does exist and we couldn't delete it for some reason (ACLs, etc).
82ccb87e	2012-02-23T22:56:04	tree: break out on write error If write_tree() returs an error, we used to set the error message and continued looping. Exit the loop so we return the error.
290f240e	2012-02-23T11:16:47	Fix readdir usage across platforms This fixes the missing readdir_r from win32 and fixes other platforms to always use the reentrant readdir_r form for reading directory contents.
1ec1de6d	2012-02-23T11:15:45	Fix warnings about type conversion on win32
01269540	2012-02-23T16:51:07	Fix -Wuninitialized warning Signed-off-by: schu <schu-github@schulog.org>
36d72a51	2012-02-22T16:06:33	Merge pull request #570 from arrbee/uniform-iterators Uniform iterators for trees, index, and workdir
0534641d	2012-02-22T15:15:35	Fix iterators based on pull request feedback This update addresses all of the feedback in pull request #570. The biggest change was to create actual linked list stacks for storing the tree and workdir iterator state. This cleaned up the code a ton. Additionally, all of the static functions had their 'git_' prefix removed, and a lot of other unnecessary changes were removed from the original patch.
da337c80	2012-02-22T11:22:33	Iterator improvements from diff implementation This makes two changes to iterator behavior: first, advance can optionally do the work of returning the new current value. This is such a common pattern that it really cleans up usage. Second, for workdir iterators, this removes automatically iterating into directories. That seemed like a good idea, but when an entirely new directory hierarchy is introduced into the workdir, there is no reason to iterate into it if there are no corresponding entries in the tree/index that it is being compared to. This second change actually wasn't a lot of code because not descending into directories was already the behavior for ignored directories. This just extends that to all directories.
8d36b253	2012-02-22T11:12:20	Merge pull request #565 from carlosmn/multimap Add config multivar support
b60deb02	2012-02-22T04:41:08	Export parse_tag_buffer as git_tag__parse_buffer.
b6c93aef	2012-02-21T14:46:24	Uniform iterators for trees, index, and workdir This create a new git_iterator type of object that provides a uniform interface for iterating over the index, an arbitrary tree, or the working directory of a repository. As part of this, git ignore support was extended to support push and pop of directory-based ignore files as the working directory is being traversed (so the array of ignores does not have to be recreated at each directory during traveral). There are a number of other small utility functions in buffer, path, vector, and fileops that are included in this patch that made the iterator implementation cleaner.
9c94a356	2012-02-21T12:15:23	Fix check for writing remote's fetch and push configurations Fix copy-paste error
f0f3a18a	2012-02-20T19:42:27	Move git_remote_load() to git_buf
89e5ed98	2012-02-20T19:04:45	Add git_remote_save()
bcb8c007	2012-02-20T18:37:07	Add git_remote_set_{fetch,push}spec() Allow setting the fetch and push refspecs, which is useful for creating new refspecs.
3005855f	2012-02-05T00:29:26	Implement setting multivars
5e0dc4af	2012-02-04T23:18:30	Support getting multivars
0774d94d	2012-02-01T17:21:28	Store multivars in the multimap
fefd4551	2012-01-23T04:26:49	First round of config multimap changes Move the configuration to use a multimap instead of a list. This commit doesn't provide any functional changes but changes the support structures.
0691966a	2012-02-16T11:48:14	notes: fix assert Hopefully fix issue "Don't sleep and code" - #558. Signed-off-by: schu <schu-github@schulog.org>
6117895f	2012-02-15T11:38:40	Merge pull request #558 from schu/notes-api Notes API
bf477ed4	2012-02-15T00:33:38	Add git notes API This commit adds basic git notes support to libgit2, namely: * git_note_read * git_note_message * git_note_oid * git_note_create * git_note_remove In the long run, we probably want to provide some convenience callback mechanism for merging and moving (filter-branch) notes. Signed-off-by: schu <schu-github@schulog.org>
0c3bae62	2012-02-15T16:56:56	zlib: Remove custom `git2/zlib.h` header This is legacy compat stuff for when `deflateBound` is not defined, but we're not embedding zlib and that function is always available. Kill that with fire.
905919e6	2012-02-14T20:44:22	util: add git__ishex git__ishex allows to check if a string is a hexadecimal representation. Signed-off-by: schu <schu-github@schulog.org>
b4b79ac3	2012-02-15T00:12:53	commit: actually allow yet to be born update_ref git_commit_create is supposed to update the given reference "update_ref", but segfaulted in case of a yet to be born reference. Fix it. Signed-off-by: schu <schu-github@schulog.org>
5e0de328	2012-02-13T17:10:24	Update Copyright header Signed-off-by: schu <schu-github@schulog.org>
15f52ae1	2011-12-19T15:59:13	config_file: fix clang sizeof-pointer-memaccess
6d39c0dd	2012-02-11T06:44:54	Merge pull request #554 from carlosmn/revwalk-reset revwalk: unmark commits as uninteresting on reset
f19e3ca2	2012-02-10T20:16:42	odb: Proper symlink hashing
18e5b854	2012-02-10T19:47:02	odb: Add internal `git_odb__hashfd`
97313ce2	2012-02-07T10:51:57	revwalk: unmark commits as uninteresting on reset Not doing so hides commits we want to get at during a second walk.
199b7d94	2012-02-05T07:42:06	Merge pull request #551 from schu/treebuilder-entries treebuilder: remove needless variable entry_count
b3408e3e	2012-02-05T14:59:45	treebuilder: remove needless variable entry_count Signed-off-by: schu <schu-github@schulog.org>
99abb79d	2012-02-03T12:45:43	repository: ensure that the path to the .git directory ends with a forward slash when opening a repository through a working directory path This fixes an issue which was detected while using one of the libgit2 bindings [0]. The lack of the trailing forward slash led the name of references returned by git_reference_listall() to be prefixed with a forward slash. [0]: https://github.com/libgit2/libgit2sharp/pull/108
31ffc141	2012-02-02T00:14:59	Fix the build on Emscripten struct timeval is used in this file, which requires <sys/time.h> to be included.
e8c96ed2	2012-02-01T12:30:35	Add unit tests for recent bug fixes Add unit tests to confirm ignore directory pattern matches and to confirm that ignore and attribute files are loaded properly into the attribute file cache.
62a1f713	2012-02-01T11:54:42	Fix memory leak in attr file cache Actually look for the file by the same cache key that we store it under. Rocket science!
4ea79a9d	2012-02-01T17:41:54	status: Document submodule TODOs
e4eb94a2	2012-01-31T14:02:52	Fix issue with ignoring whole directories Now that is_dir is calculated correctly for attr/ignore paths, it is possible to use it so that ignoring "dir/" will properly match the directory name and ignore the entire directory.
adc9bdb3	2012-01-31T13:59:32	Fix attr path is_dir check When building an attr path object, the code that checks if the file is a directory was evaluating the file as a relative path to the current working directory, instead of using the repo root. This lead to inconsistent behavior.
5d3cd4e3	2012-01-31T13:09:39	Convert status assert to skip file When status encounters a submodule, right now it is asserting. This changes it to just skip the file that it can't deal with.
279afd2a	2012-01-31T17:21:49	refspec: a ref name includes the refs/ prefix git_refspec_transform_r assumed that the reference name passed would be only a branch or tag name. This is not the case, and we need to take into consideration what's in the refspec's source to know how much of the prefix to ignore.
e4b4da14	2012-01-27T18:28:02	cache: Simplify locking mechanics The object cache is mostly IO-bound, so it makes no sense to have a lock per node.
7a6f51de	2012-01-26T18:03:14	win32: Use the Windows Atomic API on MinGW too
a53420e4	2012-01-26T17:53:46	msvc: Move `ssize_t` typedef to MSVC-only This is a MSVC-only issue. All other compilers we support work properly.
5663e61a	2012-01-25T16:44:21	repository: add minimal reinitialization of repository This currently only ensures that the version of the repository format isn't greater than zero.
a9fe8ae0	2012-01-23T22:14:04	config: don't use 'section "subsection"' internal form on config_set This had been left over from a time when I believed what the git documentation had to say about case-sensitivity. The rest of the code doesn't recognize this form and we hadn't noticed because most tests don't try to get a recently-set variable but free and reload the configuration, causing the right format to be used.
63ab73be	2012-01-20T11:13:17	Merge branch 'fix-subdir-attr-paths' into development This resolves issue #535 and issue #533.
9269ccce	2012-01-19T23:44:52	diff-index: fix leak The buffer wasn't getting freed if the last difference was a deletion.
860de004	2012-01-19T23:26:20	http: use PRIuZ MSVC doesn't think %zd is a valid specifier.
20c50b9e	2012-01-19T19:09:47	refs: don't leak the packref when deleting/renaming When we remove the ref from the hashtable, we need to free the packref.
3f2bf4d6	2012-01-19T19:06:15	hashtable: add remove2 to retrieve the value that was removed
d0ec3fb8	2012-01-19T17:07:49	indexer: save the pack index with the right name Truncate at the slash; otherwise we get ppack-*.idx filenames.
585a2eb7	2012-01-19T17:05:16	remote: don't try to free the ref on error On error, the pointer could be pointing anywhere.
c3ec2ec2	2012-01-19T00:09:47	transport: prevent git_remote_download() from segfaulting when being passed a lightweight remote built with git_remote_new()
1744fafe	2012-01-17T15:49:47	Move path related functions from fileops to path This takes all of the functions that look up simple data about paths (such as `git_futils_isdir`) and moves them over to path.h (becoming `git_path_isdir`). This leaves fileops.h just with functions that actually manipulate the filesystem or look at the file contents in some way. As part of this, the dir.h header which is really just for win32 support was moved into win32 (with some minor changes).
0b44c065	2012-01-17T14:35:04	repository: add the invalid repository path to the error message
86360ffd	2012-01-17T14:33:26	transport: prevent the transport determination mechanism from segfaulting when being passed an url starting with an unknown prefix
fdc8a7db	2012-01-17T14:06:35	Fix MSVC compilation warning
83bfbdf5	2012-01-16T18:00:18	Remove poor git__removechar function Going back over this, the git__removechar function was not needed (only invoked once) and is actually mislabeled. As implemented, it really only made sense for removing backslash characters, since two of the "removed" characters in a row would include the second one -- i.e. it really implements stripping backslash-escaped strings where a backslash allows internal whitespace in a word.
a51cd8e6	2012-01-16T16:58:27	Fix handling of relative paths for attrs Per issue #533, the handling of relative paths in attribute and ignore files was not right. Fixed this by pre-joining the relative path of the attribute/ignore file onto the match string when a full path match is required. Unfortunately, fixing this required a bit more code than I would have liked because I had to juggle things around so that the fnmatch parser would have sufficient information to prepend the relative path when it was needed.
6e03b12f	2012-01-16T15:34:35	Merge pull request #531 from arrbee/gitignore Initial implementation of gitignore support git_status_foreach() and git_status_file() will now be gitignore aware.
cfbc880d	2012-01-16T15:16:44	Patch cleanup for merge After reviewing the gitignore support with Vicent, we came up with a list of minor cleanups to prepare for merge, including: * checking git_repository_config error returns * renaming git_ignore_is_ignored and moving to status.h * fixing next_line skipping to include \r skips * commenting on where ignores are and are not included
d9e5430e	2012-01-16T11:45:34	Windows: store all 64 bits of the size in the stat structure We force stat to be a stat64 structure, so we can and should put all 64 bits of the size in st_size.
1af56d7d	2012-01-15T15:48:36	Fix #534: 64-bit issues in Windows off_t is always 32 bits in Windows, which is beyond stupid, but we just don't care anymore because we're using `git_off_t` which is assured to be 64 bits on all platforms, regardless of compilation mode. Just ensure that no casts to `off_t` are performed. Also, the check for `off_t` overflows has been dropped, once again, because the size of our offsets is always 64 bits on all platforms. Fixes #534
c1c399cf	2012-01-13T19:33:54	config: handle EOF properly In the main loop we peek to see what kind of line the next one is. If there are multiple newlines before the end of the file, the eof marker won't be set after we read the last line with data and we'll try to peek again. This peek will return LF (as it pretends that we have a newline at EOF so other function don't need any special handling). Fix cfg_getchar so it doesn't try to read past the last character in the file and config_parse so it considers LF as EOF on peek (as we're ignoring spaces) and sets the reader's EOF flag to exit the parsing loop.
1dbcc9fc	2012-01-11T21:07:16	Fix several memory issues This contains fixes for several issues discovered by MSVC and by valgrind, including some bad data access, some memory leakage (in where certain files were not being successfully added to the cache), and some code simplification.
0cfcff5d	2012-01-11T20:41:55	Convert git_path_walk_up to regular function This gets rid of the crazy macro version of git_path_walk_up and makes it into a normal function that takes a callback parameter. This turned out not to be too messy.
15debaf5	2012-01-11T17:28:25	Fix bug in dir_for_path The last checkin accidentally broke dir_for_path by propogating the dirname return code even when there was no error.
6a67a812	2012-01-11T16:01:48	Allow ignores (and attribs) for nonexistent files This fixes issue 532 that attributes (and gitignores) could not be checked for files that don't exist. It should be possible to query such things regardless of the existence of the file.
df743c7d	2012-01-09T15:37:19	Initial implementation of gitignore support Adds support for .gitignore files to git_status_foreach() and git_status_file(). This includes refactoring the gitattributes code to share logic where possible. The GIT_STATUS_IGNORED flag will now be passed in for files that are ignored (provided they are not already in the index or the head of repo).
7e443f69	2012-01-09T15:46:06	Restore portability to git_path_prettify. It turns out that passing NULL for the second parameter of realpath(3) is not as portable as one might like. Notably, Mac OS 10.5 and earlier does not support it. So this moves us back to a large buffer to get the realpath info.
1d175074	2012-01-05T17:46:06	Merge pull request #528 from arrbee/valgrind-fixes-2 Valgrind fixes in smaller pieces
fa3cb0da	2012-01-05T15:15:43	Fix memory leak in git_index_remove. Missed freeing the entry.
2d840502	2012-01-05T15:03:42	Throw first error in chain, not rethrow. This is the first time this error is throw, so use git__throw instead of git__rethrow.
671bbdd3	2012-01-05T17:31:13	reflog_write: don't access free()'d memory We get the oid of a reference, free the reference, then convert the oid to a string. We need to convert the oid before freeing the memory.
f2114d0a	2012-01-04T22:40:59	Merge remote-tracking branch 'nulltoken/topix/path_fromurl' into development Conflicts: tests-clay/clay.h tests-clay/clay_main.c
f46e6226	2012-01-04T21:15:12	Fix Windows specific off-by-one error The value returned by MultiByteToWideChar includes the NULL termination character.
acb159e1	2012-01-04T17:59:48	Fix MSVC compilation warnings
c6a437ea	2012-01-03T19:44:13	Add missing semicolon
7a704309	2012-01-02T09:58:39	Merge remote-tracking branch 'drizzd/diff-index-tests' into development Conflicts: tests-clay/clay.h tests-clay/clay_main.c
9191a6d2	2012-01-02T09:56:48	Merge remote-tracking branch 'arrbee/git-attributes' into development Conflicts: tests-clay/clay_main.c
9dd4c3e8	2011-12-31T05:56:39	config: Rename the `delete` callback name `delete` is a reserved keyword in C++.
bd370b14	2011-12-30T15:00:14	Improved gitattributes macro implementation This updates to implementation of gitattribute macros to be much more similar to core git (albeit not 100%) and to handle expansion of macros within macros, etc. It also cleans up the refcounting usage with macros to be much cleaner. Also, this adds a new vector function `git_vector_insert_sorted()` which allows you to maintain a sorted list as you go. In order to write that function, this changes the function `git__bsearch()` to take a somewhat different set of parameters, although the core functionality is still the same.
1f783edf	2011-12-29T15:03:38	do not use full path in diff-index Currently, diff_index passes the full relative path from the repository root to the callback. In case of an addition, it passes the tree entry instead of the index entry. This change fixes the path used for addition, and it passes only the basename of the path. This mimics the current behavior of git_tree_diff.
e4592538	2011-12-29T13:12:51	allow opening index in bare repo The git.git implementation allows this, and there is no reason not to.
599f2849	2011-12-26T18:37:31	add git_index_read_tree
a26a1563	2011-12-30T19:03:55	move entry_is_tree to tree.h
c6d2a2c0	2011-12-29T21:31:30	Fixed up memory leaks
73b51450	2011-12-28T23:28:50	Add support for macros and cache flush API. Add support for git attribute macro definitions. Also, add support for cache flush API to clear the attribute file content cache when needed. Additionally, improved the handling of global and system files, making common utility functions in fileops and converting config and attr to both use the common functions. Adds a bunch more tests and fixed some memory leaks. Note that adding macros required me to use refcounted attribute assignment definitions, which complicated, but probably improved memory usage.
e2580375	2011-12-28T11:36:18	transport: make local transport accept a file Uri containing percent-encoded characters This makes libgit2 compliant with the following scenario $ git ls-remote file:///d:/temp/dwm%20tinou 732d790b702db4b8985f5104fc44642654f6a6b6 HEAD 732d790b702db4b8985f5104fc44642654f6a6b6 refs/heads/master 732d790b702db4b8985f5104fc44642654f6a6b6 refs/remotes/origin/HEAD 732d790b702db4b8985f5104fc44642654f6a6b6 refs/remotes/origin/master $ mv "/d/temp/dwm tinou" /d/temp/dwm+tinou $ git ls-remote file:///d:/temp/dwm%20tinou fatal: 'd:/temp/dwm tinou' does not appear to be a git repository fatal: The remote end hung up unexpectedly $ git ls-remote file:///d:/temp/dwm+tinou 732d790b702db4b8985f5104fc44642654f6a6b6 HEAD 732d790b702db4b8985f5104fc44642654f6a6b6 refs/heads/master 732d790b702db4b8985f5104fc44642654f6a6b6 refs/remotes/origin/HEAD 732d790b702db4b8985f5104fc44642654f6a6b6 refs/remotes/origin/master
2017a15d	2011-12-27T16:03:28	path: add git_path_fromurl()
459e2dcd	2011-12-27T11:18:57	path: add git__percent_decode()
eb8de747	2011-12-28T20:24:58	util: add git__fromhex()
d16e4b2b	2011-12-25T00:25:04	remotes: Remove unused variables
fa515656	2011-12-25T00:22:20	refs: Fix double free Includes relevant Clay test
db1f7e59	2011-12-21T16:36:34	remote: add test to retrieve the advertised references from a local repository and fix related implementation
ee1f0b1a	2011-12-16T10:56:43	Add APIs for git attributes This adds APIs for querying git attributes. In addition to the new API in include/git2/attr.h, most of the action is in src/attr_file.[hc] which contains utilities for dealing with a single attributes file, and src/attr.[hc] which contains the implementation of the APIs that merge all applicable attributes files.

0a43d7cb

2012-02-25T18:52:28

config: correctly deal with setting a multivar with regex where there are no matches We used to erroneously consider "^$" as a special case for appending a value to a multivar. This was a misunderstanding and we should always append a value if there are no existing values that match. While we're in the area, replace all the variables in-memory in one swoop and then replace them on disk so as to avoid matching a value we've just introduced.

9554cd51

2012-02-24T12:14:26

A remote exists with an URL alone We used to consider it an error if a remote didn't have at least a fetch refspec. This was too much checking, as a remote doesn't in fact need to have anything other than an URL configured to be considered a remote.

1db9d2c3

2012-02-23T17:11:20

Ensure that commits don't fail if committing content that already exists Making a commit that results in a blob that already exists in the ODB (i.e. committing something, then making a revert commit) will result in us trying to p_rename -> MoveFileExW a temp file into the existing ODB entry. Despite the MOVEFILE_REPLACE_EXISTING flag is passed in, Win32 does not care and fails it with STATUS_ACCESS_DENIED. To fix this, we p_unlink the ODB entry before attempting to rename it. This call will typically fail, but we don't care, we'll let the p_rename fail if the file actually does exist and we couldn't delete it for some reason (ACLs, etc).

82ccb87e

2012-02-23T22:56:04

tree: break out on write error If write_tree() returs an error, we used to set the error message and continued looping. Exit the loop so we return the error.

290f240e

2012-02-23T11:16:47

Fix readdir usage across platforms This fixes the missing readdir_r from win32 and fixes other platforms to always use the reentrant readdir_r form for reading directory contents.

1ec1de6d

2012-02-23T11:15:45

Fix warnings about type conversion on win32

01269540

2012-02-23T16:51:07

Fix -Wuninitialized warning Signed-off-by: schu <schu-github@schulog.org>

36d72a51

2012-02-22T16:06:33

Merge pull request #570 from arrbee/uniform-iterators Uniform iterators for trees, index, and workdir

0534641d

2012-02-22T15:15:35

Fix iterators based on pull request feedback This update addresses all of the feedback in pull request #570. The biggest change was to create actual linked list stacks for storing the tree and workdir iterator state. This cleaned up the code a ton. Additionally, all of the static functions had their 'git_' prefix removed, and a lot of other unnecessary changes were removed from the original patch.

da337c80

2012-02-22T11:22:33

Iterator improvements from diff implementation This makes two changes to iterator behavior: first, advance can optionally do the work of returning the new current value. This is such a common pattern that it really cleans up usage. Second, for workdir iterators, this removes automatically iterating into directories. That seemed like a good idea, but when an entirely new directory hierarchy is introduced into the workdir, there is no reason to iterate into it if there are no corresponding entries in the tree/index that it is being compared to. This second change actually wasn't a lot of code because not descending into directories was already the behavior for ignored directories. This just extends that to all directories.

8d36b253

2012-02-22T11:12:20

Merge pull request #565 from carlosmn/multimap Add config multivar support

b60deb02

2012-02-22T04:41:08

Export parse_tag_buffer as git_tag__parse_buffer.

b6c93aef

2012-02-21T14:46:24

Uniform iterators for trees, index, and workdir This create a new git_iterator type of object that provides a uniform interface for iterating over the index, an arbitrary tree, or the working directory of a repository. As part of this, git ignore support was extended to support push and pop of directory-based ignore files as the working directory is being traversed (so the array of ignores does not have to be recreated at each directory during traveral). There are a number of other small utility functions in buffer, path, vector, and fileops that are included in this patch that made the iterator implementation cleaner.

9c94a356

2012-02-21T12:15:23

Fix check for writing remote's fetch and push configurations Fix copy-paste error

f0f3a18a

2012-02-20T19:42:27

Move git_remote_load() to git_buf

89e5ed98

2012-02-20T19:04:45

Add git_remote_save()

bcb8c007

2012-02-20T18:37:07

Add git_remote_set_{fetch,push}spec() Allow setting the fetch and push refspecs, which is useful for creating new refspecs.

3005855f

2012-02-05T00:29:26

Implement setting multivars

5e0dc4af

2012-02-04T23:18:30

Support getting multivars

0774d94d

2012-02-01T17:21:28

Store multivars in the multimap

fefd4551

2012-01-23T04:26:49

First round of config multimap changes Move the configuration to use a multimap instead of a list. This commit doesn't provide any functional changes but changes the support structures.

0691966a

2012-02-16T11:48:14

notes: fix assert Hopefully fix issue "Don't sleep and code" - #558. Signed-off-by: schu <schu-github@schulog.org>

6117895f

2012-02-15T11:38:40

Merge pull request #558 from schu/notes-api Notes API

bf477ed4

2012-02-15T00:33:38

Add git notes API This commit adds basic git notes support to libgit2, namely: * git_note_read * git_note_message * git_note_oid * git_note_create * git_note_remove In the long run, we probably want to provide some convenience callback mechanism for merging and moving (filter-branch) notes. Signed-off-by: schu <schu-github@schulog.org>

0c3bae62

2012-02-15T16:56:56

zlib: Remove custom `git2/zlib.h` header This is legacy compat stuff for when `deflateBound` is not defined, but we're not embedding zlib and that function is always available. Kill that with fire.

905919e6

2012-02-14T20:44:22

util: add git__ishex git__ishex allows to check if a string is a hexadecimal representation. Signed-off-by: schu <schu-github@schulog.org>

b4b79ac3

2012-02-15T00:12:53

commit: actually allow yet to be born update_ref git_commit_create is supposed to update the given reference "update_ref", but segfaulted in case of a yet to be born reference. Fix it. Signed-off-by: schu <schu-github@schulog.org>

5e0de328

2012-02-13T17:10:24

Update Copyright header Signed-off-by: schu <schu-github@schulog.org>

15f52ae1

2011-12-19T15:59:13

config_file: fix clang sizeof-pointer-memaccess

6d39c0dd

2012-02-11T06:44:54

Merge pull request #554 from carlosmn/revwalk-reset revwalk: unmark commits as uninteresting on reset

f19e3ca2

2012-02-10T20:16:42

odb: Proper symlink hashing

18e5b854

2012-02-10T19:47:02

odb: Add internal `git_odb__hashfd`

97313ce2

2012-02-07T10:51:57

revwalk: unmark commits as uninteresting on reset Not doing so hides commits we want to get at during a second walk.

199b7d94

2012-02-05T07:42:06

Merge pull request #551 from schu/treebuilder-entries treebuilder: remove needless variable entry_count

b3408e3e

2012-02-05T14:59:45

treebuilder: remove needless variable entry_count Signed-off-by: schu <schu-github@schulog.org>

99abb79d

2012-02-03T12:45:43

repository: ensure that the path to the .git directory ends with a forward slash when opening a repository through a working directory path This fixes an issue which was detected while using one of the libgit2 bindings [0]. The lack of the trailing forward slash led the name of references returned by git_reference_listall() to be prefixed with a forward slash. [0]: https://github.com/libgit2/libgit2sharp/pull/108

31ffc141

2012-02-02T00:14:59

Fix the build on Emscripten struct timeval is used in this file, which requires <sys/time.h> to be included.

e8c96ed2

2012-02-01T12:30:35

Add unit tests for recent bug fixes Add unit tests to confirm ignore directory pattern matches and to confirm that ignore and attribute files are loaded properly into the attribute file cache.

62a1f713

2012-02-01T11:54:42

Fix memory leak in attr file cache Actually look for the file by the same cache key that we store it under. Rocket science!

4ea79a9d

2012-02-01T17:41:54

status: Document submodule TODOs

e4eb94a2

2012-01-31T14:02:52

Fix issue with ignoring whole directories Now that is_dir is calculated correctly for attr/ignore paths, it is possible to use it so that ignoring "dir/" will properly match the directory name and ignore the entire directory.

adc9bdb3

2012-01-31T13:59:32

Fix attr path is_dir check When building an attr path object, the code that checks if the file is a directory was evaluating the file as a relative path to the current working directory, instead of using the repo root. This lead to inconsistent behavior.

5d3cd4e3

2012-01-31T13:09:39

Convert status assert to skip file When status encounters a submodule, right now it is asserting. This changes it to just skip the file that it can't deal with.

279afd2a

2012-01-31T17:21:49

refspec: a ref name includes the refs/ prefix git_refspec_transform_r assumed that the reference name passed would be only a branch or tag name. This is not the case, and we need to take into consideration what's in the refspec's source to know how much of the prefix to ignore.

e4b4da14

2012-01-27T18:28:02

cache: Simplify locking mechanics The object cache is mostly IO-bound, so it makes no sense to have a lock per node.

7a6f51de

2012-01-26T18:03:14

win32: Use the Windows Atomic API on MinGW too

a53420e4

2012-01-26T17:53:46

msvc: Move `ssize_t` typedef to MSVC-only This is a MSVC-only issue. All other compilers we support work properly.

5663e61a

2012-01-25T16:44:21

repository: add minimal reinitialization of repository This currently only ensures that the version of the repository format isn't greater than zero.

a9fe8ae0

2012-01-23T22:14:04

config: don't use 'section "subsection"' internal form on config_set This had been left over from a time when I believed what the git documentation had to say about case-sensitivity. The rest of the code doesn't recognize this form and we hadn't noticed because most tests don't try to get a recently-set variable but free and reload the configuration, causing the right format to be used.

63ab73be

2012-01-20T11:13:17

Merge branch 'fix-subdir-attr-paths' into development This resolves issue #535 and issue #533.

9269ccce

2012-01-19T23:44:52

diff-index: fix leak The buffer wasn't getting freed if the last difference was a deletion.

860de004

2012-01-19T23:26:20

http: use PRIuZ MSVC doesn't think %zd is a valid specifier.

20c50b9e

2012-01-19T19:09:47

refs: don't leak the packref when deleting/renaming When we remove the ref from the hashtable, we need to free the packref.

3f2bf4d6

2012-01-19T19:06:15

hashtable: add remove2 to retrieve the value that was removed

d0ec3fb8

2012-01-19T17:07:49

indexer: save the pack index with the right name Truncate at the slash; otherwise we get ppack-*.idx filenames.

585a2eb7

2012-01-19T17:05:16

remote: don't try to free the ref on error On error, the pointer could be pointing anywhere.

c3ec2ec2

2012-01-19T00:09:47

transport: prevent git_remote_download() from segfaulting when being passed a lightweight remote built with git_remote_new()

1744fafe

2012-01-17T15:49:47

Move path related functions from fileops to path This takes all of the functions that look up simple data about paths (such as `git_futils_isdir`) and moves them over to path.h (becoming `git_path_isdir`). This leaves fileops.h just with functions that actually manipulate the filesystem or look at the file contents in some way. As part of this, the dir.h header which is really just for win32 support was moved into win32 (with some minor changes).

0b44c065

2012-01-17T14:35:04

repository: add the invalid repository path to the error message

86360ffd

2012-01-17T14:33:26

transport: prevent the transport determination mechanism from segfaulting when being passed an url starting with an unknown prefix

fdc8a7db

2012-01-17T14:06:35

Fix MSVC compilation warning

83bfbdf5

2012-01-16T18:00:18

Remove poor git__removechar function Going back over this, the git__removechar function was not needed (only invoked once) and is actually mislabeled. As implemented, it really only made sense for removing backslash characters, since two of the "removed" characters in a row would include the second one -- i.e. it really implements stripping backslash-escaped strings where a backslash allows internal whitespace in a word.

a51cd8e6

2012-01-16T16:58:27

Fix handling of relative paths for attrs Per issue #533, the handling of relative paths in attribute and ignore files was not right. Fixed this by pre-joining the relative path of the attribute/ignore file onto the match string when a full path match is required. Unfortunately, fixing this required a bit more code than I would have liked because I had to juggle things around so that the fnmatch parser would have sufficient information to prepend the relative path when it was needed.

6e03b12f

2012-01-16T15:34:35

Merge pull request #531 from arrbee/gitignore Initial implementation of gitignore support git_status_foreach() and git_status_file() will now be gitignore aware.

cfbc880d

2012-01-16T15:16:44

Patch cleanup for merge After reviewing the gitignore support with Vicent, we came up with a list of minor cleanups to prepare for merge, including: * checking git_repository_config error returns * renaming git_ignore_is_ignored and moving to status.h * fixing next_line skipping to include \r skips * commenting on where ignores are and are not included

d9e5430e

2012-01-16T11:45:34

Windows: store all 64 bits of the size in the stat structure We force stat to be a stat64 structure, so we can and should put all 64 bits of the size in st_size.

1af56d7d

2012-01-15T15:48:36

Fix #534: 64-bit issues in Windows off_t is always 32 bits in Windows, which is beyond stupid, but we just don't care anymore because we're using `git_off_t` which is assured to be 64 bits on all platforms, regardless of compilation mode. Just ensure that no casts to `off_t` are performed. Also, the check for `off_t` overflows has been dropped, once again, because the size of our offsets is always 64 bits on all platforms. Fixes #534

c1c399cf

2012-01-13T19:33:54

config: handle EOF properly In the main loop we peek to see what kind of line the next one is. If there are multiple newlines before the end of the file, the eof marker won't be set after we read the last line with data and we'll try to peek again. This peek will return LF (as it pretends that we have a newline at EOF so other function don't need any special handling). Fix cfg_getchar so it doesn't try to read past the last character in the file and config_parse so it considers LF as EOF on peek (as we're ignoring spaces) and sets the reader's EOF flag to exit the parsing loop.

1dbcc9fc

2012-01-11T21:07:16

Fix several memory issues This contains fixes for several issues discovered by MSVC and by valgrind, including some bad data access, some memory leakage (in where certain files were not being successfully added to the cache), and some code simplification.

0cfcff5d

2012-01-11T20:41:55

Convert git_path_walk_up to regular function This gets rid of the crazy macro version of git_path_walk_up and makes it into a normal function that takes a callback parameter. This turned out not to be too messy.

15debaf5

2012-01-11T17:28:25

Fix bug in dir_for_path The last checkin accidentally broke dir_for_path by propogating the dirname return code even when there was no error.

6a67a812

2012-01-11T16:01:48

Allow ignores (and attribs) for nonexistent files This fixes issue 532 that attributes (and gitignores) could not be checked for files that don't exist. It should be possible to query such things regardless of the existence of the file.

df743c7d

2012-01-09T15:37:19

Initial implementation of gitignore support Adds support for .gitignore files to git_status_foreach() and git_status_file(). This includes refactoring the gitattributes code to share logic where possible. The GIT_STATUS_IGNORED flag will now be passed in for files that are ignored (provided they are not already in the index or the head of repo).

7e443f69

2012-01-09T15:46:06

Restore portability to git_path_prettify. It turns out that passing NULL for the second parameter of realpath(3) is not as portable as one might like. Notably, Mac OS 10.5 and earlier does not support it. So this moves us back to a large buffer to get the realpath info.

1d175074

2012-01-05T17:46:06

Merge pull request #528 from arrbee/valgrind-fixes-2 Valgrind fixes in smaller pieces

fa3cb0da

2012-01-05T15:15:43

Fix memory leak in git_index_remove. Missed freeing the entry.

2d840502

2012-01-05T15:03:42

Throw first error in chain, not rethrow. This is the first time this error is throw, so use git__throw instead of git__rethrow.

671bbdd3

2012-01-05T17:31:13

reflog_write: don't access free()'d memory We get the oid of a reference, free the reference, then convert the oid to a string. We need to convert the oid before freeing the memory.

f2114d0a

2012-01-04T22:40:59

Merge remote-tracking branch 'nulltoken/topix/path_fromurl' into development Conflicts: tests-clay/clay.h tests-clay/clay_main.c

f46e6226

2012-01-04T21:15:12

Fix Windows specific off-by-one error The value returned by MultiByteToWideChar includes the NULL termination character.

acb159e1

2012-01-04T17:59:48

Fix MSVC compilation warnings

c6a437ea

2012-01-03T19:44:13

Add missing semicolon

7a704309

2012-01-02T09:58:39

Merge remote-tracking branch 'drizzd/diff-index-tests' into development Conflicts: tests-clay/clay.h tests-clay/clay_main.c

9191a6d2

2012-01-02T09:56:48

Merge remote-tracking branch 'arrbee/git-attributes' into development Conflicts: tests-clay/clay_main.c

9dd4c3e8

2011-12-31T05:56:39

config: Rename the `delete` callback name `delete` is a reserved keyword in C++.

bd370b14

2011-12-30T15:00:14

Improved gitattributes macro implementation This updates to implementation of gitattribute macros to be much more similar to core git (albeit not 100%) and to handle expansion of macros within macros, etc. It also cleans up the refcounting usage with macros to be much cleaner. Also, this adds a new vector function `git_vector_insert_sorted()` which allows you to maintain a sorted list as you go. In order to write that function, this changes the function `git__bsearch()` to take a somewhat different set of parameters, although the core functionality is still the same.

1f783edf

2011-12-29T15:03:38

do not use full path in diff-index Currently, diff_index passes the full relative path from the repository root to the callback. In case of an addition, it passes the tree entry instead of the index entry. This change fixes the path used for addition, and it passes only the basename of the path. This mimics the current behavior of git_tree_diff.

e4592538

2011-12-29T13:12:51

allow opening index in bare repo The git.git implementation allows this, and there is no reason not to.

599f2849

2011-12-26T18:37:31

add git_index_read_tree

a26a1563

2011-12-30T19:03:55

move entry_is_tree to tree.h

c6d2a2c0

2011-12-29T21:31:30

Fixed up memory leaks

73b51450

2011-12-28T23:28:50

Add support for macros and cache flush API. Add support for git attribute macro definitions. Also, add support for cache flush API to clear the attribute file content cache when needed. Additionally, improved the handling of global and system files, making common utility functions in fileops and converting config and attr to both use the common functions. Adds a bunch more tests and fixed some memory leaks. Note that adding macros required me to use refcounted attribute assignment definitions, which complicated, but probably improved memory usage.

e2580375

2011-12-28T11:36:18

transport: make local transport accept a file Uri containing percent-encoded characters This makes libgit2 compliant with the following scenario $ git ls-remote file:///d:/temp/dwm%20tinou 732d790b702db4b8985f5104fc44642654f6a6b6 HEAD 732d790b702db4b8985f5104fc44642654f6a6b6 refs/heads/master 732d790b702db4b8985f5104fc44642654f6a6b6 refs/remotes/origin/HEAD 732d790b702db4b8985f5104fc44642654f6a6b6 refs/remotes/origin/master $ mv "/d/temp/dwm tinou" /d/temp/dwm+tinou $ git ls-remote file:///d:/temp/dwm%20tinou fatal: 'd:/temp/dwm tinou' does not appear to be a git repository fatal: The remote end hung up unexpectedly $ git ls-remote file:///d:/temp/dwm+tinou 732d790b702db4b8985f5104fc44642654f6a6b6 HEAD 732d790b702db4b8985f5104fc44642654f6a6b6 refs/heads/master 732d790b702db4b8985f5104fc44642654f6a6b6 refs/remotes/origin/HEAD 732d790b702db4b8985f5104fc44642654f6a6b6 refs/remotes/origin/master

2017a15d

2011-12-27T16:03:28

path: add git_path_fromurl()

459e2dcd

2011-12-27T11:18:57

path: add git__percent_decode()

eb8de747

2011-12-28T20:24:58

util: add git__fromhex()

d16e4b2b

2011-12-25T00:25:04

remotes: Remove unused variables

fa515656

2011-12-25T00:22:20

refs: Fix double free Includes relevant Clay test

db1f7e59

2011-12-21T16:36:34

remote: add test to retrieve the advertised references from a local repository and fix related implementation

ee1f0b1a

2011-12-16T10:56:43

Add APIs for git attributes This adds APIs for querying git attributes. In addition to the new API in include/git2/attr.h, most of the action is in src/attr_file.[hc] which contains utilities for dealing with a single attributes file, and src/attr.[hc] which contains the implementation of the APIs that merge all applicable attributes files.

thodg/libgit2/src

src

Log