kmx git

Commit	Date	Message
ecf4f33a	2018-02-08T11:14:48	Convert usage of `git_buf_free` to new `git_buf_dispose`
a7168b47	2018-05-22T16:13:47	path: reject .gitmodules as a symlink Any part of the library which asks the question can pass in the mode to have it checked against `.gitmodules` being a symlink. This is particularly relevant for adding entries to the index from the worktree and for checking out files.
06b8a40f	2018-02-16T11:29:46	Explicitly mark fallthrough cases with comments A lot of compilers nowadays generate warnings when there are cases in a switch statement which implicitly fall through to the next case. To avoid this warning, the last line in the case that is falling through can have a comment matching a regular expression, where one possible comment body would be `/* fall through */`. An alternative to the comment would be an explicit attribute like e.g. `[[clang::fallthrough]` or `__attribute__ ((fallthrough))`. But GCC only introduced support for such an attribute recently with GCC 7. Thus, and also because the fallthrough comment is supported by most compilers, we settle for using comments instead. One shortcoming of that method is that compilers are very strict about that. Most interestingly, that comment _really_ has to be the last line. In case a closing brace follows the comment, the heuristic will fail.
c0487bde	2018-01-12T08:23:43	tree: reject writing null-OID entries to a tree In commit a96d3cc3f (cache-tree: reject entries with null sha1, 2017-04-21), the git.git project has changed its stance on null OIDs in tree objects. Previously, null OIDs were accepted in tree entries to help tools repair broken history. This resulted in some problems though in that many code paths mistakenly passed null OIDs to be added to a tree, which was not properly detected. Align our own code base according to the upstream change and reject writing tree entries early when the OID is all-zero.
2c99011a	2017-12-31T09:33:19	tree: standard error messages are lowercase Our standard error messages begin with a lower case letter so that they can be prefixed or embedded nicely. These error messages were missed during the standardization pass since they use the `tree_error` helper function.
0c7f49dd	2017-06-30T13:39:01	Make sure to always include "common.h" first Next to including several files, our "common.h" header also declares various macros which are then used throughout the project. As such, we have to make sure to always include this file first in all implementation files. Otherwise, we might encounter problems or even silent behavioural differences due to macros or defines not being defined as they should be. So in fact, our header and implementation files should make sure to always include "common.h" first. This commit does so by establishing a common include pattern. Header files inside of "src" will now always include "common.h" as its first other file, separated by a newline from all the other includes to make it stand out as special. There are two cases for the implementation files. If they do have a matching header file, they will always include this one first, leading to "common.h" being transitively included as first file. If they do not have a matching header file, they instead include "common.h" as first file themselves. This fixes the outlined problems and will become our standard practice for header and source files inside of the "src/" from now on.
06abbb7f	2017-03-27T13:14:48	treebuilder: exit early if running OOM in `write_with_buffer` While writing the tree inside of a buffer, we check whether the buffer runs out of memory after each tree entry. While we set the error code as soon as we detect the OOM situation, we happily proceed iterating over the entries. This is not useful at all, as we will try to write into the buffer repeatedly, which cannot work. Fix this by exiting as soon as we are OOM.
8d1e71f5	2017-03-27T13:14:05	treebuilder: remove shadowing variable in `write_with_buffer` The `git_tree_entry *entry` variable is defined twice inside of this function. While this is not a problem currently, remove the shadowing variable to avoid future confusion.
4f9327fa	2017-03-27T13:11:38	treebuilder: fix memory leaks in `write_with_buffer` While we detect errors in `git_treebuilder_write_with_buffer`, we just exit directly instead of freeing allocated memory. Fix this by remembering error codes and skipping forward to the function's cleanup code.
13c3bc9a	2017-01-27T14:32:23	strmap: remove GIT__USE_STRMAP macro
73028af8	2017-01-27T14:20:24	khash: avoid using macro magic to get return address
44e8af8f	2017-01-21T22:51:50	Merge pull request #3892 from mitesch/shared_buffer Use a shared buffer in calls of git_treebuilder_write to avoid heap contention
909d5494	2016-12-29T12:25:15	giterr_set: consistent error messages Error messages should be sentence fragments, and therefore: 1. Should not begin with a capital letter, 2. Should not conclude with punctuation, and 3. Should not end a sentence and begin a new one
87aaefe2	2016-08-09T12:23:19	write_tree: use shared buffer for writing trees The function to write trees allocates a new buffer for each tree. This causes problems with performance when performing a lot of actions involving writing trees, e.g. when doing many merges. Fix the issue by instead handing in a shared buffer, which is then re-used across the calls without having to re-allocate between calls.
89776585	2016-11-14T12:44:52	tree: look for conflicts in the new tree when updating We look at whether we're trying to replace a blob with a tree during the update phase, but we fail to look at whether we've just inserted a blob where we're now trying to insert a tree. Update the check to look at both places. The test for this was previously succeeding due to the bu where we did not look at the sorted output.
b85929c5	2016-11-14T12:44:01	tree: use the sorted update list in our loop The loop is made with the assumption that the inputs are sorted and not using it leads to bad outputs.
901434b0	2016-11-14T10:07:37	common: cast precision specifiers to int
4974e3a5	2016-10-07T09:18:55	tree: validate filename and OID length when parsing object When parsing tree entries from raw object data, we do not verify that the tree entry actually has a filename as well as a valid object ID. Fix this by asserting that the filename length is non-zero as well as asserting that there are at least `GIT_OID_RAWSZ` bytes left when parsing the OID.
fdf14637	2016-05-26T00:58:43	Merge pull request #3792 from edquist/misc Fix comment for GIT_FILEMODE_LINK
a2cb4713	2016-05-24T14:30:43	tree: handle removal of all entries in the updater When we remove all entries in a tree, we should remove that tree from its parent rather than include the empty tree.
53412305	2016-05-19T15:29:53	tree: plug leaks in the tree updater
6ee08d2c	2016-05-19T15:22:02	tree: use the basename for the entry removal When we want to remove the file, use the basename as the name of the entry to remove, instead of the full one, which includes the directories we've inserted into the stack.
c8fb2e15	2016-05-18T16:00:01	Fix comment for GIT_FILEMODE_LINK 0120000 is symbolic link, not commit
9464f9eb	2016-05-02T17:36:58	Introduce a function to create a tree based on a different one Instead of going through the usual steps of reading a tree recursively into an index, modifying it and writing it back out as a tree, introduce a function to perform simple updates more efficiently. `git_tree_create_updated` avoids reading trees which are not modified and supports upsert and delete operations. It is not as versatile as modifying the index, but it makes some common operations much more efficient.
f5c874a4	2016-03-29T14:47:31	Plug a few leaks
e2e4bae9	2016-03-22T00:18:44	tree: drop the now-unnecessary entries vector Remove the now-unnecessary entries vector. Add `git_array_search` to binary search through an array to accomplish this.
4ed9e939	2016-03-20T12:01:45	tree: store the entries in a growable array Take advantage of the constant size of tree-owned arrays and store them in an array instead of a pool. This still lets us free them all at once but lets the system allocator do the work of fitting them in.
60a194aa	2016-03-20T11:00:12	tree: re-use the id and filename in the odb object Instead of copying over the data into the individual entries, point to the originals, which are already in a format we can use.
ea5bf6bb	2016-03-04T12:34:38	treebuilder: don't try to verify submodules exist in the odb Submodules don't exist in the objectdb and the code is making us try to look for a blob with its commit id, which is obviously not going to work. Skip the test if the user wants to insert a submodule.
2bbc7d3e	2016-02-23T15:00:27	treebuilder: validate tree entries (optionally) When `GIT_OPT_ENABLE_STRICT_OBJECT_CREATION` is turned on, validate the tree and parent ids given to treebuilder insertion.
aadad405	2016-02-11T14:28:31	tree: zap warnings around `size_t` vs `uint16_t`
fc436469	2015-12-06T22:51:00	tree: mark a tree as already sorted The trees are sorted on-disk, so we don't have to go over them again. This cuts almost a fifth of time spent parsing trees.
0174f21b	2015-12-02T18:56:31	tree: use a specialised mode parse function Instead of going out to strtol, which is made to parse generic numbers, copy a parse function from git which is specialised for file modes.
9487585d	2015-12-01T14:19:29	tree: mark cloned tree entries as un-pooled When duplicating a `struct git_tree_entry` with `git_tree_entry_dup` the resulting structure is not allocated inside a memory pool. As we do a 1:1 copy of the original struct, though, we also copy the `pooled` field, which is set to `true` for pooled entries. This results in a huge memory leak as we never free tree entries that were duplicated from a pooled tree entry. Fix this by marking the newly duplicated entry as un-pooled.
95ae3520	2015-11-30T17:32:18	tree: ensure the entry filename fits in 16 bits Return an error in case the length is too big. Also take this opportunity to have a single allocating function for the size and overflow logic.
ee42bb0e	2015-11-28T19:18:29	tree: make path len uint16_t and avoid holes This reduces the size of the struct from 32 to 26 bytes, and leaves a single padding byte at the end of the struct (which comes from the zero-length array).
2580077f	2015-11-15T00:44:02	tree: calculate the filename length once We already know the size due to the `memchr()` so use that information instead of calling `strlen()` on it.
ed970748	2015-11-14T23:50:06	tree: pool the entry memory allocations These are rather small allocations, so we end up spending a non-trivial amount of time asking the OS for memory. Since these entries are tied to the lifetime of their tree, we can give the tree a pool so we speed up the allocations.
7132150d	2015-11-14T23:46:21	tree: avoid advancing over the filename multiple times We've already looked at the filename with `memchr()` and then used `strlen()` to allocate the entry. We already know how much we have to advance to get to the object id, so add the filename length instead of looking at each byte again.
84511143	2015-03-12T01:49:07	tree: add more correct error messages for not found Don't use the full path, as that's not what we are asserting does not exist, but just the subpath we were looking up.
c8e02b87	2015-02-15T21:07:05	Remove extra semicolon outside of a function Without this change, compiling with gcc and pedantic generates warning: ISO C does not allow extra ‘;’ outside of a function.
f1453c59	2015-02-12T12:19:37	Make our overflow check look more like gcc/clang's Make our overflow checking look more like gcc and clang's, so that we can substitute it out with the compiler instrinsics on platforms that support it. This means dropping the ability to pass `NULL` as an out parameter. As a result, the macros also get updated to reflect this as well.
2884cc42	2015-02-11T09:39:38	overflow checking: don't make callers set oom Have the ALLOC_OVERFLOW testing macros also simply set_oom in the case where a computation would overflow, so that callers don't need to.
392702ee	2015-02-09T23:41:13	allocations: test for overflow of requested size Introduce some helper macros to test integer overflow from arithmetic and set error message appropriately.
208a2c8a	2014-12-27T12:09:11	treebuilder: rename _create() to _new() This function is a constructor, so let's name it like one and leave _create() for the reference functions, which do create/write the reference.
dce7b1a4	2014-12-16T19:24:04	treebuilder: take a repository for path validation Path validation may be influenced by `core.protectHFS` and `core.protectNTFS` configuration settings, thus treebuilders can take a repository to influence their configuration.
62155257	2014-11-25T00:14:52	tree: Check for `.git` with case insensitivy
7465e873	2014-09-29T09:07:41	index: fill the tree cache on write-tree An obvious place to fill the tree cache is on write-tree, as we're guaranteed to be able to fill in the whole tree cache. The way this commit does this is not the most efficient, as we read the root tree from the odb instead of filling in the cache as we go along, but it fills the cache such that successive operations (and persisting the index to disk) will be able to take advantage of the cache, and it reuses the code we already have for filling the cache. Filling in the cache as we create the trees would require some reallocation of the children vector, which is currently not possible with out pool implementation. A different data structure would likely allow us to perform this operation at a later date.
c2f8b215	2014-09-28T07:00:49	index: write out the tree cache extension Keeping the cache around after read-tree is only one part of the optimisation opportunities. In order to share the cache between program instances, we need to write the TREE extension to the index. Do so, taking the opportunity to rename 'entries' to 'entry_count' to match the name given in the format description. The included test is rather trivial, but works as a sanity check.
966fb207	2014-06-25T21:25:44	tree: free in error conditions As reported by coverity, we would leak some memory in error conditions.
fcc60066	2014-06-09T22:59:32	treentry: no need for manual size book-keeping We can simply ask the hasmap.
978fbb4c	2014-06-09T22:45:23	treebuilder: don't keep removed entries around If the user wants to keep a copy for themselves, they should make a copy. It adds unnecessary complexity to make sure the returned entries are valid until the builder is cleared.
4d3f1f97	2014-06-09T04:38:22	treebuilder: use a map instead of vector to store the entries Finding a filename in a vector means we need to resort it every time we want to read from it, which includes every time we want to write to it as well, as we want to find duplicate keys. A hash-map fits what we want to do much more accurately, as we do not care about sorting, but just the particular filename. We still keep removed entries around, as the interface let you assume they were going to be around until the treebuilder is cleared or freed, but in this case that involves an append to a vector in the filter case, which can now fail. The only time we care about sorting is when we write out the tree, so let's make that the only time we do any sorting.
2c11d2ee	2014-06-09T23:23:53	treebuilder: insert sorted By inserting in the right position, we can keep the vector sorted, making entry insertion almost twice as fast.
882c7742	2014-02-04T10:01:37	Convert pqueue to just be a git_vector This updates the git_pqueue to simply be a set of specialized init/insert/pop functions on a git_vector. To preserve the pqueue feature of having a fixed size heap, I converted the "sorted" field in git_vectors to a more general "flags" field so that pqueue could mix in it's own flag. This had a bunch of ramifications because a number of places were directly looking at the vector "sorted" field - I added a couple new git_vector helpers (is_sorted, set_sorted) so the specific representation of this information could be abstracted.
f000ee4e	2014-01-24T18:23:46	tree: remove legacy 'oid' naming Rename git_tree_entry_byoid() to _byid() as per the convention.
d541170c	2014-01-24T11:36:41	index: rename an entry's id to 'id' This was not converted when we converted the rest, so do it now.
529f342a	2014-01-14T21:33:59	Align git_tree_entry_dup.
26c1cb91	2013-12-09T09:44:03	One more rename/cleanup for callback err functions
25e0b157	2013-12-06T15:07:57	Remove converting user error to GIT_EUSER This changes the behavior of callbacks so that the callback error code is not converted into GIT_EUSER and instead we propagate the return value through to the caller. Instead of using the giterr_capture and giterr_restore functions, we now rely on all functions to pass back the return value from a callback. To avoid having a return value with no error message, the user can call the public giterr_set_str or some such function to set an error message. There is a new helper 'giterr_set_callback' that functions can invoke after making a callback which ensures that some error message was set in case the callback did not set one. In places where the sign of the callback return value is meaningful (e.g. positive to skip, negative to abort), only the negative values are returned back to the caller, obviously, since the other values allow for continuing the loop. The hardest parts of this were in the checkout code where positive return values were overloaded as meaningful values for checkout. I fixed this by adding an output parameter to many of the internal checkout functions and removing the overload. This added some code, but it is probably a better implementation. There is some funkiness in the network code where user provided callbacks could be returning a positive or a negative value and we want to rely on that to cancel the loop. There are still a couple places where an user error might get turned into GIT_EUSER there, I think, though none exercised by the tests.
dab89f9b	2013-12-04T21:22:57	Further EUSER and error propagation fixes This continues auditing all the places where GIT_EUSER is being returned and making sure to clear any existing error using the new giterr_user_cancel helper. As a result, places that relied on intercepting GIT_EUSER but having the old error preserved also needed to be cleaned up to correctly stash and then retrieve the actual error. Additionally, as I encountered places where error codes were not being propagated correctly, I tried to fix them up. A number of those fixes are included in the this commit as well.
13f670a5	2013-04-15T09:07:57	tree: allow retrieval of raw attributes When a tool needs to recreate the tree object (for example an interface to another VCS), it needs to use the raw attributes, forgoing any normalization.
d7fc2eb2	2013-09-13T21:36:39	Fix memory leak in git_tree_walk on error or when stopping the walk from the supplied callback
4e01e302	2013-09-13T21:21:33	Prevent git_tree_walk 'skip entry' callback return code from leaking through as the return value of git_tree_walk
a7fcc44d	2013-09-05T16:14:32	Better macro name for is-exec-bit-set test
f240acce	2013-09-05T11:20:12	Add more file mode permissions macros This adds some more macros for some standard operations on file modes, particularly related to permissions, and then updates a number of places around the code base to use the new macros.
114f5a6c	2013-06-10T10:10:39	Reorganize diff and add basic diff driver This is a significant reorganization of the diff code to break it into a set of more clearly distinct files and to document the new organization. Hopefully this will make the diff code easier to understand and to extend. This adds a new `git_diff_driver` object that looks of diff driver information from the attributes and the config so that things like function content in diff headers can be provided. The full driver spec is not implemented in the commit - this is focused on the reorganization of the code and putting the driver hooks in place. This also removes a few #includes from src/repository.h that were overbroad, but as a result required extra #includes in a variety of places since including src/repository.h no longer results in pulling in the whole world.
58206c9a	2013-05-16T10:38:27	Add cat-file example and increase const use in API This adds an example implementation that emulates git cat-file. It is a convenient and relatively simple example of getting data out of a repository. Implementing this also revealed that there are a number of APIs that are still not using const pointers to objects that really ought to be. The main cause of this is that `git_vector_bsearch` may need to call `git_vector_sort` before doing the search, so a const pointer to the vector is not allowed. However, for tree objects, with a little care, we can ensure that the vector of tree entries is always sorted and allow lookups to take a const pointer. Also, the missing const in commit objects just looks like an oversight.
b60d95c7	2013-05-01T15:55:54	clarify error propogation
0b726701	2013-04-30T13:13:38	object: Explicitly define helper API methods for all obj types
203d5b0e	2013-04-29T18:20:58	Some cleanups Removed useless prototype and renamed object typecast functions declaration macro.
d7761102	2013-04-29T14:22:06	Standardize cast versions of git_object accessors This removes the GIT_INLINE versions of the simple git_object accessors and standardizes them with a helper macro in src/object.h to build the function bodies.
116bbdf0	2013-04-16T12:08:21	clean up tree pointer casting
3f27127d	2013-04-16T11:51:02	Simplify object table parse functions This unifies the object parse functions into one signature that takes an odb_object.
78606263	2013-04-15T00:05:44	Add callback to git_objects_table This adds create and free callback to the git_objects_table so that more of the creation and destruction of objects can be table driven instead of using switch statements. This also makes the semantics of certain object creation functions consistent so that we can make better use of function pointers. This also fixes a theoretical error case where an object allocation fails and we end up storing NULL into the cache.
badd85a6	2013-04-10T17:10:17	Use git_odb_object_data/_size whereever possible This uses the odb object accessors so we can change the internals more easily...
8842c75f	2013-04-03T22:30:07	What has science done.
f90391ea	2013-04-18T14:47:54	treebuilder: don't overwrite the error message
0c468633	2013-03-14T13:40:15	Improved tree iterator internals This updates the tree iterator internals to be more efficient. The tree_iterator_entry objects are now kept as pointers that are allocated from a git_pool, so that we may use git__tsort_r for sorting (which is better than qsort, given that the tree is likely mostly ordered already). Those tree_iterator_entry objects now keep direct pointers to the data they refer to instead of keeping indirect index values. This simplifies a lot of the data structure traversal code. This also adds bsearch to find the start item position for range- limited tree iterators, and is more explicit about using git_path_cmp instead of reimplementing it. The git_path_cmp changed a bit to make it easier for tree_iterators to use it (but it was barely being used previously, so not a big deal). This adds a git_pool_free_array function that efficiently frees a list of pool allocated pointers (which the tree_iterator keeps). Also, added new tests for the git_pool free list functionality that was not previously being tested (or used).
cb53669e	2013-03-01T16:38:13	Rename function to __ prefix
3f0d0c85	2013-03-01T15:44:18	Disable ignore_case when writing the index to a tree
e2237179	2013-02-20T10:58:56	Some code cleanups in tree.c This replaces most of the explicit vector iteration with calls to git_vector_foreach, adds in some git__free and giterr_clear calls to clean up during some error paths, and a couple of other code simplifications.
93ab370b	2013-02-20T10:50:01	Store treebuilder length separately from entries vec The treebuilder entries vector flags removed items which means we can't rely on the entries vector length to accurately get the number of entries. This adds an entrycount value and maintains it while updating the treebuilder entries.
3ad05221	2013-02-05T16:52:56	Fix MSVC compilation warnings Fix #1308
4657fc1c	2013-01-29T13:54:08	Merge pull request #1285 from phkelley/vector Vector improvements and their fallout
5fb98206	2013-01-28T15:56:04	Added git_treebuilder_entrycount Conflicts: src/tree.c
11d9f6b3	2013-01-27T14:17:07	Vector improvements and their fallout
98527b5b	2013-01-09T16:03:35	Add git_tree_entry_cmp and git_tree_entry_icmp This adds a new external API git_tree_entry_cmp and a new internal API git_tree_entry_icmp for sorting tree entries. The case insensitive one is internal only because general users should never be seeing case-insensitively sorted trees.
359fc2d2	2013-01-08T17:07:25	update copyrights
91e7d263	2012-12-10T15:29:44	Fix iterator reset and add reset ranges The `git_iterator_reset` command has not been working in all cases particularly when there is a start and end range. This fixes it and adds tests for it, and also extends it with the ability to update the start/end range strings when an iterator is reset.
9950d27a	2012-12-06T13:26:58	Clean up iterator APIs This removes the need to explicitly pass the repo into iterators where the repo is implied by the other parameters. This moves the repo to be owned by the parent struct. Also, this has some iterator related updates to the internal diff API to lay the groundwork for checkout improvements.
f1c75b94	2012-12-07T15:16:41	tree: relax the filemode parser There are many different broken filemodes in the wild so we need to protect against them and give something useful up the chain. Don't fail when reading a tree from the ODB but normalize the mode as best we can. As 664 is no longer a mode that we consider to be valid and gets normalized to 644, we can stop accepting it in the treebuilder. The library won't expose it to the user, so any invalid modes are a bug.
e2934db2	2012-11-29T02:05:46	Merge pull request #1090 from arrbee/ignore-invalid-by-default Ignore invalid entries by default
16248ee2	2012-11-21T11:03:07	Fix up some missing consts in tree & index This fixes some missed places where we can apply const-ness to various public APIs. There are still some index and tree APIs that cannot take const pointers because we sort our `git_vectors` lazily and so we can't reliably bsearch the index and tree content without applying a `git_vector_sort()` first. This also fixes some missed places where size_t can be used and where const can be applied to a couple internal functions.
a8122b5d	2012-11-21T15:39:03	Fix warnings on Win64 build
f45d51ff	2012-11-20T19:57:46	API updates for index.h
e120123e	2012-11-20T14:01:46	API review / update for tree.h
cfeef7ce	2012-11-19T13:40:08	Minor optimization to tree entry validity check This checks for a leading '.' before looking for the invalid tree entry names. Even on pretty high levels of optimization, this seems to make a measurable improvement. I accidentally used && in the check initially instead of \|\| and while debugging ended up improving the error reporting of issues with adding tree entries. I thought I'd leave those changes, too.
0d778b1a	2012-11-18T16:52:04	Catch invalid filenames in append_entry() This prevents the index api from calling write_tree() with a bogus tree.
19af78bb	2012-11-18T15:15:24	Prevent creating `..`, `.`, and `.git` with tree builder As per core git.

ecf4f33a

2018-02-08T11:14:48

Convert usage of `git_buf_free` to new `git_buf_dispose`

a7168b47

2018-05-22T16:13:47

path: reject .gitmodules as a symlink Any part of the library which asks the question can pass in the mode to have it checked against `.gitmodules` being a symlink. This is particularly relevant for adding entries to the index from the worktree and for checking out files.

06b8a40f

2018-02-16T11:29:46

Explicitly mark fallthrough cases with comments A lot of compilers nowadays generate warnings when there are cases in a switch statement which implicitly fall through to the next case. To avoid this warning, the last line in the case that is falling through can have a comment matching a regular expression, where one possible comment body would be `/* fall through */`. An alternative to the comment would be an explicit attribute like e.g. `[[clang::fallthrough]` or `__attribute__ ((fallthrough))`. But GCC only introduced support for such an attribute recently with GCC 7. Thus, and also because the fallthrough comment is supported by most compilers, we settle for using comments instead. One shortcoming of that method is that compilers are very strict about that. Most interestingly, that comment _really_ has to be the last line. In case a closing brace follows the comment, the heuristic will fail.

c0487bde

2018-01-12T08:23:43

tree: reject writing null-OID entries to a tree In commit a96d3cc3f (cache-tree: reject entries with null sha1, 2017-04-21), the git.git project has changed its stance on null OIDs in tree objects. Previously, null OIDs were accepted in tree entries to help tools repair broken history. This resulted in some problems though in that many code paths mistakenly passed null OIDs to be added to a tree, which was not properly detected. Align our own code base according to the upstream change and reject writing tree entries early when the OID is all-zero.

2c99011a

2017-12-31T09:33:19

tree: standard error messages are lowercase Our standard error messages begin with a lower case letter so that they can be prefixed or embedded nicely. These error messages were missed during the standardization pass since they use the `tree_error` helper function.

0c7f49dd

2017-06-30T13:39:01

Make sure to always include "common.h" first Next to including several files, our "common.h" header also declares various macros which are then used throughout the project. As such, we have to make sure to always include this file first in all implementation files. Otherwise, we might encounter problems or even silent behavioural differences due to macros or defines not being defined as they should be. So in fact, our header and implementation files should make sure to always include "common.h" first. This commit does so by establishing a common include pattern. Header files inside of "src" will now always include "common.h" as its first other file, separated by a newline from all the other includes to make it stand out as special. There are two cases for the implementation files. If they do have a matching header file, they will always include this one first, leading to "common.h" being transitively included as first file. If they do not have a matching header file, they instead include "common.h" as first file themselves. This fixes the outlined problems and will become our standard practice for header and source files inside of the "src/" from now on.

06abbb7f

2017-03-27T13:14:48

treebuilder: exit early if running OOM in `write_with_buffer` While writing the tree inside of a buffer, we check whether the buffer runs out of memory after each tree entry. While we set the error code as soon as we detect the OOM situation, we happily proceed iterating over the entries. This is not useful at all, as we will try to write into the buffer repeatedly, which cannot work. Fix this by exiting as soon as we are OOM.

8d1e71f5

2017-03-27T13:14:05

treebuilder: remove shadowing variable in `write_with_buffer` The `git_tree_entry *entry` variable is defined twice inside of this function. While this is not a problem currently, remove the shadowing variable to avoid future confusion.

4f9327fa

2017-03-27T13:11:38

treebuilder: fix memory leaks in `write_with_buffer` While we detect errors in `git_treebuilder_write_with_buffer`, we just exit directly instead of freeing allocated memory. Fix this by remembering error codes and skipping forward to the function's cleanup code.

13c3bc9a

2017-01-27T14:32:23

strmap: remove GIT__USE_STRMAP macro

73028af8

2017-01-27T14:20:24

khash: avoid using macro magic to get return address

44e8af8f

2017-01-21T22:51:50

Merge pull request #3892 from mitesch/shared_buffer Use a shared buffer in calls of git_treebuilder_write to avoid heap contention

909d5494

2016-12-29T12:25:15

giterr_set: consistent error messages Error messages should be sentence fragments, and therefore: 1. Should not begin with a capital letter, 2. Should not conclude with punctuation, and 3. Should not end a sentence and begin a new one

87aaefe2

2016-08-09T12:23:19

write_tree: use shared buffer for writing trees The function to write trees allocates a new buffer for each tree. This causes problems with performance when performing a lot of actions involving writing trees, e.g. when doing many merges. Fix the issue by instead handing in a shared buffer, which is then re-used across the calls without having to re-allocate between calls.

89776585

2016-11-14T12:44:52

tree: look for conflicts in the new tree when updating We look at whether we're trying to replace a blob with a tree during the update phase, but we fail to look at whether we've just inserted a blob where we're now trying to insert a tree. Update the check to look at both places. The test for this was previously succeeding due to the bu where we did not look at the sorted output.

b85929c5

2016-11-14T12:44:01

tree: use the sorted update list in our loop The loop is made with the assumption that the inputs are sorted and not using it leads to bad outputs.

901434b0

2016-11-14T10:07:37

common: cast precision specifiers to int

4974e3a5

2016-10-07T09:18:55

tree: validate filename and OID length when parsing object When parsing tree entries from raw object data, we do not verify that the tree entry actually has a filename as well as a valid object ID. Fix this by asserting that the filename length is non-zero as well as asserting that there are at least `GIT_OID_RAWSZ` bytes left when parsing the OID.

fdf14637

2016-05-26T00:58:43

Merge pull request #3792 from edquist/misc Fix comment for GIT_FILEMODE_LINK

a2cb4713

2016-05-24T14:30:43

tree: handle removal of all entries in the updater When we remove all entries in a tree, we should remove that tree from its parent rather than include the empty tree.

53412305

2016-05-19T15:29:53

tree: plug leaks in the tree updater

6ee08d2c

2016-05-19T15:22:02

tree: use the basename for the entry removal When we want to remove the file, use the basename as the name of the entry to remove, instead of the full one, which includes the directories we've inserted into the stack.

c8fb2e15

2016-05-18T16:00:01

Fix comment for GIT_FILEMODE_LINK 0120000 is symbolic link, not commit

9464f9eb

2016-05-02T17:36:58

Introduce a function to create a tree based on a different one Instead of going through the usual steps of reading a tree recursively into an index, modifying it and writing it back out as a tree, introduce a function to perform simple updates more efficiently. `git_tree_create_updated` avoids reading trees which are not modified and supports upsert and delete operations. It is not as versatile as modifying the index, but it makes some common operations much more efficient.

f5c874a4

2016-03-29T14:47:31

Plug a few leaks

e2e4bae9

2016-03-22T00:18:44

tree: drop the now-unnecessary entries vector Remove the now-unnecessary entries vector. Add `git_array_search` to binary search through an array to accomplish this.

4ed9e939

2016-03-20T12:01:45

tree: store the entries in a growable array Take advantage of the constant size of tree-owned arrays and store them in an array instead of a pool. This still lets us free them all at once but lets the system allocator do the work of fitting them in.

60a194aa

2016-03-20T11:00:12

tree: re-use the id and filename in the odb object Instead of copying over the data into the individual entries, point to the originals, which are already in a format we can use.

ea5bf6bb

2016-03-04T12:34:38

treebuilder: don't try to verify submodules exist in the odb Submodules don't exist in the objectdb and the code is making us try to look for a blob with its commit id, which is obviously not going to work. Skip the test if the user wants to insert a submodule.

2bbc7d3e

2016-02-23T15:00:27

treebuilder: validate tree entries (optionally) When `GIT_OPT_ENABLE_STRICT_OBJECT_CREATION` is turned on, validate the tree and parent ids given to treebuilder insertion.

aadad405

2016-02-11T14:28:31

tree: zap warnings around `size_t` vs `uint16_t`

fc436469

2015-12-06T22:51:00

tree: mark a tree as already sorted The trees are sorted on-disk, so we don't have to go over them again. This cuts almost a fifth of time spent parsing trees.

0174f21b

2015-12-02T18:56:31

tree: use a specialised mode parse function Instead of going out to strtol, which is made to parse generic numbers, copy a parse function from git which is specialised for file modes.

9487585d

2015-12-01T14:19:29

tree: mark cloned tree entries as un-pooled When duplicating a `struct git_tree_entry` with `git_tree_entry_dup` the resulting structure is not allocated inside a memory pool. As we do a 1:1 copy of the original struct, though, we also copy the `pooled` field, which is set to `true` for pooled entries. This results in a huge memory leak as we never free tree entries that were duplicated from a pooled tree entry. Fix this by marking the newly duplicated entry as un-pooled.

95ae3520

2015-11-30T17:32:18

tree: ensure the entry filename fits in 16 bits Return an error in case the length is too big. Also take this opportunity to have a single allocating function for the size and overflow logic.

ee42bb0e

2015-11-28T19:18:29

tree: make path len uint16_t and avoid holes This reduces the size of the struct from 32 to 26 bytes, and leaves a single padding byte at the end of the struct (which comes from the zero-length array).

2580077f

2015-11-15T00:44:02

tree: calculate the filename length once We already know the size due to the `memchr()` so use that information instead of calling `strlen()` on it.

ed970748

2015-11-14T23:50:06

tree: pool the entry memory allocations These are rather small allocations, so we end up spending a non-trivial amount of time asking the OS for memory. Since these entries are tied to the lifetime of their tree, we can give the tree a pool so we speed up the allocations.

7132150d

2015-11-14T23:46:21

tree: avoid advancing over the filename multiple times We've already looked at the filename with `memchr()` and then used `strlen()` to allocate the entry. We already know how much we have to advance to get to the object id, so add the filename length instead of looking at each byte again.

84511143

2015-03-12T01:49:07

tree: add more correct error messages for not found Don't use the full path, as that's not what we are asserting does not exist, but just the subpath we were looking up.

c8e02b87

2015-02-15T21:07:05

Remove extra semicolon outside of a function Without this change, compiling with gcc and pedantic generates warning: ISO C does not allow extra ‘;’ outside of a function.

f1453c59

2015-02-12T12:19:37

Make our overflow check look more like gcc/clang's Make our overflow checking look more like gcc and clang's, so that we can substitute it out with the compiler instrinsics on platforms that support it. This means dropping the ability to pass `NULL` as an out parameter. As a result, the macros also get updated to reflect this as well.

2884cc42

2015-02-11T09:39:38

overflow checking: don't make callers set oom Have the ALLOC_OVERFLOW testing macros also simply set_oom in the case where a computation would overflow, so that callers don't need to.

392702ee

2015-02-09T23:41:13

allocations: test for overflow of requested size Introduce some helper macros to test integer overflow from arithmetic and set error message appropriately.

208a2c8a

2014-12-27T12:09:11

treebuilder: rename _create() to _new() This function is a constructor, so let's name it like one and leave _create() for the reference functions, which do create/write the reference.

dce7b1a4

2014-12-16T19:24:04

treebuilder: take a repository for path validation Path validation may be influenced by `core.protectHFS` and `core.protectNTFS` configuration settings, thus treebuilders can take a repository to influence their configuration.

62155257

2014-11-25T00:14:52

tree: Check for `.git` with case insensitivy

7465e873

2014-09-29T09:07:41

index: fill the tree cache on write-tree An obvious place to fill the tree cache is on write-tree, as we're guaranteed to be able to fill in the whole tree cache. The way this commit does this is not the most efficient, as we read the root tree from the odb instead of filling in the cache as we go along, but it fills the cache such that successive operations (and persisting the index to disk) will be able to take advantage of the cache, and it reuses the code we already have for filling the cache. Filling in the cache as we create the trees would require some reallocation of the children vector, which is currently not possible with out pool implementation. A different data structure would likely allow us to perform this operation at a later date.

c2f8b215

2014-09-28T07:00:49

index: write out the tree cache extension Keeping the cache around after read-tree is only one part of the optimisation opportunities. In order to share the cache between program instances, we need to write the TREE extension to the index. Do so, taking the opportunity to rename 'entries' to 'entry_count' to match the name given in the format description. The included test is rather trivial, but works as a sanity check.

966fb207

2014-06-25T21:25:44

tree: free in error conditions As reported by coverity, we would leak some memory in error conditions.

fcc60066

2014-06-09T22:59:32

treentry: no need for manual size book-keeping We can simply ask the hasmap.

978fbb4c

2014-06-09T22:45:23

treebuilder: don't keep removed entries around If the user wants to keep a copy for themselves, they should make a copy. It adds unnecessary complexity to make sure the returned entries are valid until the builder is cleared.

4d3f1f97

2014-06-09T04:38:22

treebuilder: use a map instead of vector to store the entries Finding a filename in a vector means we need to resort it every time we want to read from it, which includes every time we want to write to it as well, as we want to find duplicate keys. A hash-map fits what we want to do much more accurately, as we do not care about sorting, but just the particular filename. We still keep removed entries around, as the interface let you assume they were going to be around until the treebuilder is cleared or freed, but in this case that involves an append to a vector in the filter case, which can now fail. The only time we care about sorting is when we write out the tree, so let's make that the only time we do any sorting.

2c11d2ee

2014-06-09T23:23:53

treebuilder: insert sorted By inserting in the right position, we can keep the vector sorted, making entry insertion almost twice as fast.

882c7742

2014-02-04T10:01:37

Convert pqueue to just be a git_vector This updates the git_pqueue to simply be a set of specialized init/insert/pop functions on a git_vector. To preserve the pqueue feature of having a fixed size heap, I converted the "sorted" field in git_vectors to a more general "flags" field so that pqueue could mix in it's own flag. This had a bunch of ramifications because a number of places were directly looking at the vector "sorted" field - I added a couple new git_vector helpers (is_sorted, set_sorted) so the specific representation of this information could be abstracted.

f000ee4e

2014-01-24T18:23:46

tree: remove legacy 'oid' naming Rename git_tree_entry_byoid() to _byid() as per the convention.

d541170c

2014-01-24T11:36:41

index: rename an entry's id to 'id' This was not converted when we converted the rest, so do it now.

529f342a

2014-01-14T21:33:59

Align git_tree_entry_dup.

26c1cb91

2013-12-09T09:44:03

One more rename/cleanup for callback err functions

25e0b157

2013-12-06T15:07:57

Remove converting user error to GIT_EUSER This changes the behavior of callbacks so that the callback error code is not converted into GIT_EUSER and instead we propagate the return value through to the caller. Instead of using the giterr_capture and giterr_restore functions, we now rely on all functions to pass back the return value from a callback. To avoid having a return value with no error message, the user can call the public giterr_set_str or some such function to set an error message. There is a new helper 'giterr_set_callback' that functions can invoke after making a callback which ensures that some error message was set in case the callback did not set one. In places where the sign of the callback return value is meaningful (e.g. positive to skip, negative to abort), only the negative values are returned back to the caller, obviously, since the other values allow for continuing the loop. The hardest parts of this were in the checkout code where positive return values were overloaded as meaningful values for checkout. I fixed this by adding an output parameter to many of the internal checkout functions and removing the overload. This added some code, but it is probably a better implementation. There is some funkiness in the network code where user provided callbacks could be returning a positive or a negative value and we want to rely on that to cancel the loop. There are still a couple places where an user error might get turned into GIT_EUSER there, I think, though none exercised by the tests.

dab89f9b

2013-12-04T21:22:57

Further EUSER and error propagation fixes This continues auditing all the places where GIT_EUSER is being returned and making sure to clear any existing error using the new giterr_user_cancel helper. As a result, places that relied on intercepting GIT_EUSER but having the old error preserved also needed to be cleaned up to correctly stash and then retrieve the actual error. Additionally, as I encountered places where error codes were not being propagated correctly, I tried to fix them up. A number of those fixes are included in the this commit as well.

13f670a5

2013-04-15T09:07:57

tree: allow retrieval of raw attributes When a tool needs to recreate the tree object (for example an interface to another VCS), it needs to use the raw attributes, forgoing any normalization.

d7fc2eb2

2013-09-13T21:36:39

Fix memory leak in git_tree_walk on error or when stopping the walk from the supplied callback

4e01e302

2013-09-13T21:21:33

Prevent git_tree_walk 'skip entry' callback return code from leaking through as the return value of git_tree_walk

a7fcc44d

2013-09-05T16:14:32

Better macro name for is-exec-bit-set test

f240acce

2013-09-05T11:20:12

Add more file mode permissions macros This adds some more macros for some standard operations on file modes, particularly related to permissions, and then updates a number of places around the code base to use the new macros.

114f5a6c

2013-06-10T10:10:39

Reorganize diff and add basic diff driver This is a significant reorganization of the diff code to break it into a set of more clearly distinct files and to document the new organization. Hopefully this will make the diff code easier to understand and to extend. This adds a new `git_diff_driver` object that looks of diff driver information from the attributes and the config so that things like function content in diff headers can be provided. The full driver spec is not implemented in the commit - this is focused on the reorganization of the code and putting the driver hooks in place. This also removes a few #includes from src/repository.h that were overbroad, but as a result required extra #includes in a variety of places since including src/repository.h no longer results in pulling in the whole world.

58206c9a

2013-05-16T10:38:27

Add cat-file example and increase const use in API This adds an example implementation that emulates git cat-file. It is a convenient and relatively simple example of getting data out of a repository. Implementing this also revealed that there are a number of APIs that are still not using const pointers to objects that really ought to be. The main cause of this is that `git_vector_bsearch` may need to call `git_vector_sort` before doing the search, so a const pointer to the vector is not allowed. However, for tree objects, with a little care, we can ensure that the vector of tree entries is always sorted and allow lookups to take a const pointer. Also, the missing const in commit objects just looks like an oversight.

b60d95c7

2013-05-01T15:55:54

clarify error propogation

0b726701

2013-04-30T13:13:38

object: Explicitly define helper API methods for all obj types

203d5b0e

2013-04-29T18:20:58

Some cleanups Removed useless prototype and renamed object typecast functions declaration macro.

d7761102

2013-04-29T14:22:06

Standardize cast versions of git_object accessors This removes the GIT_INLINE versions of the simple git_object accessors and standardizes them with a helper macro in src/object.h to build the function bodies.

116bbdf0

2013-04-16T12:08:21

clean up tree pointer casting

3f27127d

2013-04-16T11:51:02

Simplify object table parse functions This unifies the object parse functions into one signature that takes an odb_object.

78606263

2013-04-15T00:05:44

Add callback to git_objects_table This adds create and free callback to the git_objects_table so that more of the creation and destruction of objects can be table driven instead of using switch statements. This also makes the semantics of certain object creation functions consistent so that we can make better use of function pointers. This also fixes a theoretical error case where an object allocation fails and we end up storing NULL into the cache.

badd85a6

2013-04-10T17:10:17

Use git_odb_object_data/_size whereever possible This uses the odb object accessors so we can change the internals more easily...

8842c75f

2013-04-03T22:30:07

What has science done.

f90391ea

2013-04-18T14:47:54

treebuilder: don't overwrite the error message

0c468633

2013-03-14T13:40:15

Improved tree iterator internals This updates the tree iterator internals to be more efficient. The tree_iterator_entry objects are now kept as pointers that are allocated from a git_pool, so that we may use git__tsort_r for sorting (which is better than qsort, given that the tree is likely mostly ordered already). Those tree_iterator_entry objects now keep direct pointers to the data they refer to instead of keeping indirect index values. This simplifies a lot of the data structure traversal code. This also adds bsearch to find the start item position for range- limited tree iterators, and is more explicit about using git_path_cmp instead of reimplementing it. The git_path_cmp changed a bit to make it easier for tree_iterators to use it (but it was barely being used previously, so not a big deal). This adds a git_pool_free_array function that efficiently frees a list of pool allocated pointers (which the tree_iterator keeps). Also, added new tests for the git_pool free list functionality that was not previously being tested (or used).

cb53669e

2013-03-01T16:38:13

Rename function to __ prefix

3f0d0c85

2013-03-01T15:44:18

Disable ignore_case when writing the index to a tree

e2237179

2013-02-20T10:58:56

Some code cleanups in tree.c This replaces most of the explicit vector iteration with calls to git_vector_foreach, adds in some git__free and giterr_clear calls to clean up during some error paths, and a couple of other code simplifications.

93ab370b

2013-02-20T10:50:01

Store treebuilder length separately from entries vec The treebuilder entries vector flags removed items which means we can't rely on the entries vector length to accurately get the number of entries. This adds an entrycount value and maintains it while updating the treebuilder entries.

3ad05221

2013-02-05T16:52:56

Fix MSVC compilation warnings Fix #1308

4657fc1c

2013-01-29T13:54:08

Merge pull request #1285 from phkelley/vector Vector improvements and their fallout

5fb98206

2013-01-28T15:56:04

Added git_treebuilder_entrycount Conflicts: src/tree.c

11d9f6b3

2013-01-27T14:17:07

Vector improvements and their fallout

98527b5b

2013-01-09T16:03:35

Add git_tree_entry_cmp and git_tree_entry_icmp This adds a new external API git_tree_entry_cmp and a new internal API git_tree_entry_icmp for sorting tree entries. The case insensitive one is internal only because general users should never be seeing case-insensitively sorted trees.

359fc2d2

2013-01-08T17:07:25

update copyrights

91e7d263

2012-12-10T15:29:44

Fix iterator reset and add reset ranges The `git_iterator_reset` command has not been working in all cases particularly when there is a start and end range. This fixes it and adds tests for it, and also extends it with the ability to update the start/end range strings when an iterator is reset.

9950d27a

2012-12-06T13:26:58

Clean up iterator APIs This removes the need to explicitly pass the repo into iterators where the repo is implied by the other parameters. This moves the repo to be owned by the parent struct. Also, this has some iterator related updates to the internal diff API to lay the groundwork for checkout improvements.

f1c75b94

2012-12-07T15:16:41

tree: relax the filemode parser There are many different broken filemodes in the wild so we need to protect against them and give something useful up the chain. Don't fail when reading a tree from the ODB but normalize the mode as best we can. As 664 is no longer a mode that we consider to be valid and gets normalized to 644, we can stop accepting it in the treebuilder. The library won't expose it to the user, so any invalid modes are a bug.

e2934db2

2012-11-29T02:05:46

Merge pull request #1090 from arrbee/ignore-invalid-by-default Ignore invalid entries by default

16248ee2

2012-11-21T11:03:07

Fix up some missing consts in tree & index This fixes some missed places where we can apply const-ness to various public APIs. There are still some index and tree APIs that cannot take const pointers because we sort our `git_vectors` lazily and so we can't reliably bsearch the index and tree content without applying a `git_vector_sort()` first. This also fixes some missed places where size_t can be used and where const can be applied to a couple internal functions.

a8122b5d

2012-11-21T15:39:03

Fix warnings on Win64 build

f45d51ff

2012-11-20T19:57:46

API updates for index.h

e120123e

2012-11-20T14:01:46

API review / update for tree.h

cfeef7ce

2012-11-19T13:40:08

Minor optimization to tree entry validity check This checks for a leading '.' before looking for the invalid tree entry names. Even on pretty high levels of optimization, this seems to make a measurable improvement. I accidentally used && in the check initially instead of || and while debugging ended up improving the error reporting of issues with adding tree entries. I thought I'd leave those changes, too.

0d778b1a

2012-11-18T16:52:04

Catch invalid filenames in append_entry() This prevents the index api from calling write_tree() with a bogus tree.

19af78bb

2012-11-18T15:15:24

Prevent creating `..`, `.`, and `.git` with tree builder As per core git.

thodg/libgit2/src/tree.c

src/tree.c

Log