kmx git

Commit	Date	Message
e0a40fb6	2017-01-09T02:54:42	Implemented full evdev keyboard text support This is based on the Linux kernel driver, and has fallback mapping tables in case we aren't connected to a virtual terminal.
49292705	2017-01-08T20:03:18	Fixed bug 3545 - SDL_EVDEV_do_text_input() may be too eager to find error cases Rob I've ran into an issue where I successfully receive SDL_KEY[UP,DOWN] events but not SDL_TEXTINPUT or SDL_TEXTEDITING. In my case the code in SDL_EVDEV_do_text_input() is returning early (on error) prior to calling SDL_SendKeyboardText(). I'm running on the RaspberryPi 3, without X11. In SDL_EVDEV_do_text_input() there is a condition to check keysyms with a type value below 0xf0, then subtract 0xf0 from type. Without understanding the purpose of this code, I disabled it, recompiled, and I'm getting correct SDL_TEXTINPUT events. I'm going to guess that my hack/fix is going to be problematic in some other environment, but after some initial testing it looks like everything is running fine in my setup.
7b66295e	2017-01-08T19:04:38	Removed console check, let the kernel decide whether muting is appropriate on this terminal. We don't fail the init if we can't mute the terminal (we might be running from ssh, or on a system without virtual terminals, etc.)
b8ab4eb9	2017-01-08T10:15:22	SDL_evdev.c: fix building against old kernel headers (K_OFF may not be defined.)
7e505b0d	2017-01-07T16:49:23	Don't fail if we can't open the tty, this can be a legitimate use case.
e9c2dcda	2017-01-07T10:13:04	Fixed bug 3469 - Keypresses leak to the console with 2.0.5 tvc I believe this patch should fix it, instead of looping through all the tty's and seemingly selecting the wrong one and corrupting the console I've just made SDL open /dev/tty which is the console attached to the current process anyway.
41be9756	2017-01-05T23:26:13	Fixed bug 3546 - SDL_EVDEV_is_console() uses type of wrong size when calling ioctl Rob When calling ioctl(fd, KDGKBTYPE, &type) in SDL_EVDEV_is_console(), we declare type as an 'int'. This should be a 'char'. The subsequent syscall, and kernel code, only writes the lower byte of the word. See: http://lxr.free-electrons.com/source/drivers/tty/vt/vt_ioctl.c?v=4.4#L399 ucval = KB_101; ret = put_user(ucval, (char __user *)arg); I've observed intermittent behavior related to this, and I can force an error condition by using an int initialized to 0xFFFFFFFF. The resulting ioctl will set type to 0XFFFFFF02, and the conditional return in SDL_EVDEV_is_console() will fail. Recommend changing to char, or masking off unused bits.
45b774e3	2017-01-01T18:33:28	Updated copyright for 2017
539afc5d	2016-11-01T10:33:44	Fixed bug 3473 - can't build on linux with an old kernel
ac7d1174	2016-10-01T15:04:13	Fixed build on older Raspberry Pi environments
a0d3e0d6	2016-10-01T14:56:53	Fixed warning and code style in SDL_evdev.c
1a31bbe2	2016-10-01T13:51:56	Fixed bug 3157 - Rudimentary touchscreen support in SDL_evdev (supports Raspberry Pi) tvc I've spent the last few days implementing touchscreen support in core/linux/SDL_evdev.c. It's fairly rudimentary at the moment, as can be seen from the multiple TODO's and FIXME's littered throughout, but I'm mainly submitting this patch for review. I've tested this patch on my Raspberry Pi 2 with the official touchscreen and it works fantastically, reporting all 10 multitouch points. I'm happy to work on this further, the evdev logic also needs a bit of a cleanup I think (I may have included a few changes). But if it's good enough in its current state to be committed then I'm sure there'd be plenty of people pleased, as currently the only other framework/library that supports touchscreens on the Raspberry Pi is Kivy.
42065e78	2016-01-02T10:10:34	Updated copyright to 2016
82eec4b6	2015-06-24T17:55:38	Fixed whitespace in SDL_evdev.c
9f50d63d	2015-06-24T17:54:39	Fixed an issue with mouse/keyboard removal Sometimes, on removal SDL_EVDEV_udev_callback() gets called with zero udev_class. This in turn seems to be caused the SDL_udev.c:guess_device_class() failing to find the attributes of the parent device. Apparently this is normal, attributes are not guaranteed to be in place during removal, depending on timing. This lack of attributes causes guess_device_class() to return zero. This fix mimics the code in linux/SDL_sysjoystick.c:joystick_udev_callback() which effectively has the same fix already in place.
0e45984f	2015-06-21T17:33:46	Fixed crash if initialization of EGL failed but was tried again later. The internal function SDL_EGL_LoadLibrary() did not delete and remove a mostly uninitialized data structure if loading the library first failed. A later try to use EGL then skipped initialization and assumed it was previously successful because the data structure now already existed. This led to at least one crash in the internal function SDL_EGL_ChooseConfig() because a NULL pointer was dereferenced to make a call to eglBindAPI().

e0a40fb6

2017-01-09T02:54:42

Implemented full evdev keyboard text support This is based on the Linux kernel driver, and has fallback mapping tables in case we aren't connected to a virtual terminal.

49292705

2017-01-08T20:03:18

Fixed bug 3545 - SDL_EVDEV_do_text_input() may be too eager to find error cases Rob I've ran into an issue where I successfully receive SDL_KEY[UP,DOWN] events but not SDL_TEXTINPUT or SDL_TEXTEDITING. In my case the code in SDL_EVDEV_do_text_input() is returning early (on error) prior to calling SDL_SendKeyboardText(). I'm running on the RaspberryPi 3, without X11. In SDL_EVDEV_do_text_input() there is a condition to check keysyms with a type value below 0xf0, then subtract 0xf0 from type. Without understanding the purpose of this code, I disabled it, recompiled, and I'm getting correct SDL_TEXTINPUT events. I'm going to guess that my hack/fix is going to be problematic in some other environment, but after some initial testing it looks like everything is running fine in my setup.

7b66295e

2017-01-08T19:04:38

Removed console check, let the kernel decide whether muting is appropriate on this terminal. We don't fail the init if we can't mute the terminal (we might be running from ssh, or on a system without virtual terminals, etc.)

b8ab4eb9

2017-01-08T10:15:22

SDL_evdev.c: fix building against old kernel headers (K_OFF may not be defined.)

7e505b0d

2017-01-07T16:49:23

Don't fail if we can't open the tty, this can be a legitimate use case.

e9c2dcda

2017-01-07T10:13:04

Fixed bug 3469 - Keypresses leak to the console with 2.0.5 tvc I believe this patch should fix it, instead of looping through all the tty's and seemingly selecting the wrong one and corrupting the console I've just made SDL open /dev/tty which is the console attached to the current process anyway.

41be9756

2017-01-05T23:26:13

Fixed bug 3546 - SDL_EVDEV_is_console() uses type of wrong size when calling ioctl Rob When calling ioctl(fd, KDGKBTYPE, &type) in SDL_EVDEV_is_console(), we declare type as an 'int'. This should be a 'char'. The subsequent syscall, and kernel code, only writes the lower byte of the word. See: http://lxr.free-electrons.com/source/drivers/tty/vt/vt_ioctl.c?v=4.4#L399 ucval = KB_101; ret = put_user(ucval, (char __user *)arg); I've observed intermittent behavior related to this, and I can force an error condition by using an int initialized to 0xFFFFFFFF. The resulting ioctl will set type to 0XFFFFFF02, and the conditional return in SDL_EVDEV_is_console() will fail. Recommend changing to char, or masking off unused bits.

45b774e3

2017-01-01T18:33:28

Updated copyright for 2017

539afc5d

2016-11-01T10:33:44

Fixed bug 3473 - can't build on linux with an old kernel

ac7d1174

2016-10-01T15:04:13

Fixed build on older Raspberry Pi environments

a0d3e0d6

2016-10-01T14:56:53

Fixed warning and code style in SDL_evdev.c

1a31bbe2

2016-10-01T13:51:56

Fixed bug 3157 - Rudimentary touchscreen support in SDL_evdev (supports Raspberry Pi) tvc I've spent the last few days implementing touchscreen support in core/linux/SDL_evdev.c. It's fairly rudimentary at the moment, as can be seen from the multiple TODO's and FIXME's littered throughout, but I'm mainly submitting this patch for review. I've tested this patch on my Raspberry Pi 2 with the official touchscreen and it works fantastically, reporting all 10 multitouch points. I'm happy to work on this further, the evdev logic also needs a bit of a cleanup I think (I may have included a few changes). But if it's good enough in its current state to be committed then I'm sure there'd be plenty of people pleased, as currently the only other framework/library that supports touchscreens on the Raspberry Pi is Kivy.

42065e78

2016-01-02T10:10:34

82eec4b6

2015-06-24T17:55:38

Fixed whitespace in SDL_evdev.c

9f50d63d

2015-06-24T17:54:39

Fixed an issue with mouse/keyboard removal Sometimes, on removal SDL_EVDEV_udev_callback() gets called with zero udev_class. This in turn seems to be caused the SDL_udev.c:guess_device_class() failing to find the attributes of the parent device. Apparently this is normal, attributes are not guaranteed to be in place during removal, depending on timing. This lack of attributes causes guess_device_class() to return zero. This fix mimics the code in linux/SDL_sysjoystick.c:joystick_udev_callback() which effectively has the same fix already in place.

0e45984f

2015-06-21T17:33:46

Fixed crash if initialization of EGL failed but was tried again later. The internal function SDL_EGL_LoadLibrary() did not delete and remove a mostly uninitialized data structure if loading the library first failed. A later try to use EGL then skipped initialization and assumed it was previously successful because the data structure now already existed. This led to at least one crash in the internal function SDL_EGL_ChooseConfig() because a NULL pointer was dereferenced to make a call to eglBindAPI().

kc3-lang/SDL/src/core/linux/SDL_evdev.c

src/core/linux/SDL_evdev.c

Log