kmx git

Commit	Date	Message
6ae227d0	2021-08-08T23:27:08	x11/wayland: fix screensaver suspension via D-Bus b08b1bde introduced a subtle bug. Despite not using D-Bus types directly, the code used the SDL_USE_LIBDBUS definition set by SDL_dbus.h to conditionally compile calls SDL_DBus_ScreensaverTickle() and SDL_DBus_ScreensaverInhibit(). As a result, it still compiled without SDL_dbus.h included, but screensaver suspension silently failed to work. The D-Bus stuff could probably use some tweaks to be harder to accidentally break, but for now just restore the header includes.
b08b1bde	2021-08-03T22:50:58	linux: remove d-bus lazy init dead code Lazy init in X11/Wayland is dead code since dbdbae4
0dd7024d	2021-03-12T21:58:20	Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
9130f7c3	2021-01-02T10:25:38	Updated copyright for 2021
a8780c6a	2020-01-16T20:49:25	Updated copyright date for 2020
5e13087b	2019-01-04T22:01:14	Updated copyright for 2019
e3cc5b2c	2018-01-03T10:03:25	Updated copyright for 2018
ce2b1644	2017-08-28T00:11:38	Be clear that disabling Vulkan surface support disables the entire SDL Vulkan integration
25e3a1ec	2017-08-27T22:15:57	vulkan: Initial Vulkan support! This work was done by Jacob Lifshay and Mark Callow; I'm just merging it into revision control.
2ffd6d02	2017-07-31T13:49:22	x11: Make a separate unmapped window to own clipboard selections. Now the clipboard isn't lost if you destroy a specific SDL_Window, as it works on other platforms. You will still lose the clipboard data on SDL_Quit() or process termination, but that's X11 for you; run a Clipboard Manager daemon. Fixes Bugzilla #3222. Fixes Bugzilla #3718.
45b774e3	2017-01-01T18:33:28	Updated copyright for 2017
7c316366	2016-12-26T23:02:14	x11: Don't loop forever if the X server refuses a pointer grab.
36156335	2016-11-20T21:34:54	Renaming of guard header names to quiet -Wreserved-id-macro Patch contributed by Sylvain
8eb76276	2016-11-01T17:38:05	Skip duplicate key events sent by IMEs like uim.
808c75d1	2016-10-07T18:57:40	Fixed bug 2824 - Add Fcitx Input Method Support Weitian Leung Just moved ibus direct call to SDL_IME_* related functions, and adds fcitx IME support (uses DBus, too), enable with env: SDL_IM_MODULE=fcitx (ibus still the default one)
359f59ae	2016-10-01T14:22:10	Fixed bug 3130 - Spacebar not responding Alex Baines Make sure group is valid before passing it to XkbKeysymToKeycode.
02f49fdb	2016-03-04T18:47:19	x11: Deal with window borders better. - Cache the _NET_FRAME_EXTENTS data locally, so we don't have to query the X server for them (instead, we update our cached data when PropertyNotify events alert us to a change). - Use our cached extents for X11_GetWindowBordersSize(), so it's a fast call. - Window position was meant to refer to the client area, not the window decorations, so adjust appropriately when getting/setting the position.
3bdaf4c6	2016-01-05T02:46:10	Added SDL_SetWindowOpacity() and SDL_GetWindowOpacity(). This is currently implemented for X11, Cocoa, Windows, and DirectFB. This patch is based on work in Unreal Engine 4's fork of SDL, compliments of Epic Games.
dc532c70	2016-01-05T02:27:50	Added SDL_WINDOWEVENT_TAKE_FOCUS. This is for corner cases where a multi-window app is activated and wants to make a decision about where focus should go. This patch came from Unreal Engine 4's fork of SDL, compliments of Epic Games.
f9af0c03	2016-01-05T02:27:26	x11: Put a matching window_group wmhint on every window created. This is useful to the Window Manager, so it can know to associate multiple SDL windows with a single app.
f2defe5e	2016-01-05T01:30:40	Added special window type flags. Specifically: always on top, skip taskbar, tooltip, utility, and popup menu. This is currently only implemented for X11. This patch is based on work in Unreal Engine 4's fork of SDL, compliments of Epic Games.
6df5e1e5	2016-01-04T16:25:27	x11: Support _NET_WM_USER_TIME and give _NET_ACTIVE_WINDOW a valid timestamp. Fixes Bugzilla #3056.
42065e78	2016-01-02T10:10:34	Updated copyright to 2016
81457603	2015-08-15T00:36:39	X11: Handle keyboard layout changing during app's run on Ubuntu 12.04 (etc). Fixes Bugzilla #3050 (in addition to Jason Wyatt's patch, prior to this).
0e45984f	2015-06-21T17:33:46	Fixed crash if initialization of EGL failed but was tried again later. The internal function SDL_EGL_LoadLibrary() did not delete and remove a mostly uninitialized data structure if loading the library first failed. A later try to use EGL then skipped initialization and assumed it was previously successful because the data structure now already existed. This led to at least one crash in the internal function SDL_EGL_ChooseConfig() because a NULL pointer was dereferenced to make a call to eglBindAPI().
2a757825	2015-05-28T00:30:21	X11: Add Xdbe support to message boxes (thanks, Melker!). Without this, message boxes with a lot of text will noticibly flicker as you mouse over buttons. Fixes Bugzilla #2343.
2c4a6ea0	2015-05-26T06:27:46	Updated the copyright year to 2015
8875a401	2015-04-22T16:50:48	x11: Optimize SDL_GetGlobalMouseState() a little. Use XInput2 to mark the global mouse state as dirty so we don't have to make a bunch of roundtrips to the X server when nothing has changed.
b72938c8	2015-04-20T12:22:44	Windows: Always set the system timer resolution to 1ms by default. An existing hint lets apps that don't need the timer resolution changed avoid this, to save battery, etc, but this fixes several problems in timing, audio callbacks not firing fast enough, etc. Fixes Bugzilla #2944.
fe6c797c	2015-04-10T23:30:31	Fixed an iOS view orientation issue when SDL_GL_CreateContext or SDL_CreateRenderer is called.
b88ca1b4	2015-02-10T16:28:56	the last parameter of XChangeProperty is the number of elements.. and when the element format is 32.. the element is "long" so we have 5 long elements here. Yes this seems confusing as on mac+linux Long is either 32 or 64bits depending on the architecture, but this is how the X11 protocol is defined. Thus 5 is the correct value for the nelts here. Not 5 or 10 depending on the architecture. More info on the confusion https://bugs.freedesktop.org/show_bug.cgi?id=16802
203ea981	2015-01-26T17:46:39	X11: Don't delay delivery of focus events unless we just changed vidmodes. Normally there's a 200 millisecond delay on all focus events in case there was a vidmode change, now we note the last vidmode change and only impose this delay if a change happened extremely recently. Thanks to Epic Games for reporting this issue.
b48e54aa	2015-01-26T22:00:29	Fixed bug 2802 - [patch] Fix android build compiling in wrong filesystem implementation Jonas Kulla The configure script didn't differentiate between Linux and Android, unconditionally compiling in the unix implementation of SDL_sysfilesystem.c. I'm probably one of the very few people building SDL for android using classic configure + standalone toolchain, so this has gone undetected all along.
70438be2	2014-12-03T10:55:23	WinRT: fixed bug whereby SDL would override an app's default orientation WinRT apps can set a default, preferred orientation via a .appxmanifest file. SDL was overriding this on app startup, and making the app use all possible orientations (landscape and portrait). Thanks to Eric Wing for the heads up on this!
9c398852	2014-11-22T22:20:40	Corrected header file documentation comment.
24c86b55	2014-09-11T19:24:42	[X11] Reconcile logical keyboard state with physical state on FocusIn since the window system doesn't do it for us like other platforms. This prevents sticky keys and missed keys when going in and out of focus, for example Alt would appear to stick if switching away from an SDL app with Alt-Tab and had to be pressed again. CR: Sam
b56b37cd	2014-06-21T17:25:59	Fixed warning when building without ibus
41a39837	2014-06-18T20:11:39	Add IBus IME Support, move DBus code to its own file. (v3.3 squashed)
3dcb451f	2014-04-09T21:29:19	Added a README file regarding WinRT support To note, this file is currently formatted with CRLF line endings, rather than LF, to allow the file to be viewed with Notepad.
4ca76b3e	2014-03-02T14:59:06	Add support for the freedesktop.org Idle Inhibition specification, as per: http://people.freedesktop.org/~hadess/idle-inhibition-spec/ This makes screensaver inhibition work with GNOME 3 and other desktop environments that implement the specification. https://bugzilla.libsdl.org/show_bug.cgi?id=2169
abe2ac2c	2014-02-21T08:37:57	Fixes #2326, clean up the X11 backend a bit
58edac3e	2014-02-02T00:53:27	Fixed bug 2374 - Update copyright for 2014... Is it that time already??
f848adff	2013-11-29T10:06:08	Improve Android pause/resume behavior.
7e1289af	2013-11-24T23:56:17	Make internal SDL sources include SDL_internal.h instead of SDL_config.h The new header will include SDL_config.h, but allows for other global stuff.
dad42067	2013-08-12T11:13:50	Fixes #2022, do not resume on Android when surfaceChanged If the app is in landscape mode and the user presses the power button, a pause is followed immediately by a surfaceChanged event because the lock screen is shown in portrait mode. This triggers a "false" resume. So, we just pause and resume following the onWindowFocusChanged events. Also, wait for SDL_APP_WILLENTERBACKGROUND and SDL_APP_DIDENTERBACKGROUND before blocking the event pump.
1ad936eb	2013-08-11T19:56:43	Fixed bug 2027 - Full-screen appears to be broken - hang in SDL_DestroyWindow() Rainer Deyke I'm running Linux Mint 15 with the Cinnamon window manager. SDL_DestroyWindow consistently locks up for me when the window if fullscreen.

6ae227d0

2021-08-08T23:27:08

x11/wayland: fix screensaver suspension via D-Bus b08b1bde introduced a subtle bug. Despite not using D-Bus types directly, the code used the SDL_USE_LIBDBUS definition set by SDL_dbus.h to conditionally compile calls SDL_DBus_ScreensaverTickle() and SDL_DBus_ScreensaverInhibit(). As a result, it still compiled without SDL_dbus.h included, but screensaver suspension silently failed to work. The D-Bus stuff could probably use some tweaks to be harder to accidentally break, but for now just restore the header includes.

b08b1bde

2021-08-03T22:50:58

linux: remove d-bus lazy init dead code Lazy init in X11/Wayland is dead code since dbdbae4

0dd7024d

2021-03-12T21:58:20

Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.

9130f7c3

2021-01-02T10:25:38

Updated copyright for 2021

a8780c6a

2020-01-16T20:49:25

Updated copyright date for 2020

5e13087b

2019-01-04T22:01:14

Updated copyright for 2019

e3cc5b2c

2018-01-03T10:03:25

Updated copyright for 2018

ce2b1644

2017-08-28T00:11:38

Be clear that disabling Vulkan surface support disables the entire SDL Vulkan integration

25e3a1ec

2017-08-27T22:15:57

vulkan: Initial Vulkan support! This work was done by Jacob Lifshay and Mark Callow; I'm just merging it into revision control.

2ffd6d02

2017-07-31T13:49:22

x11: Make a separate unmapped window to own clipboard selections. Now the clipboard isn't lost if you destroy a specific SDL_Window, as it works on other platforms. You will still lose the clipboard data on SDL_Quit() or process termination, but that's X11 for you; run a Clipboard Manager daemon. Fixes Bugzilla #3222. Fixes Bugzilla #3718.

45b774e3

2017-01-01T18:33:28

Updated copyright for 2017

7c316366

2016-12-26T23:02:14

x11: Don't loop forever if the X server refuses a pointer grab.

36156335

2016-11-20T21:34:54

Renaming of guard header names to quiet -Wreserved-id-macro Patch contributed by Sylvain

8eb76276

2016-11-01T17:38:05

Skip duplicate key events sent by IMEs like uim.

808c75d1

2016-10-07T18:57:40

Fixed bug 2824 - Add Fcitx Input Method Support Weitian Leung Just moved ibus direct call to SDL_IME_* related functions, and adds fcitx IME support (uses DBus, too), enable with env: SDL_IM_MODULE=fcitx (ibus still the default one)

359f59ae

2016-10-01T14:22:10

Fixed bug 3130 - Spacebar not responding Alex Baines Make sure group is valid before passing it to XkbKeysymToKeycode.

02f49fdb

2016-03-04T18:47:19

x11: Deal with window borders better. - Cache the _NET_FRAME_EXTENTS data locally, so we don't have to query the X server for them (instead, we update our cached data when PropertyNotify events alert us to a change). - Use our cached extents for X11_GetWindowBordersSize(), so it's a fast call. - Window position was meant to refer to the client area, not the window decorations, so adjust appropriately when getting/setting the position.

3bdaf4c6

2016-01-05T02:46:10

Added SDL_SetWindowOpacity() and SDL_GetWindowOpacity(). This is currently implemented for X11, Cocoa, Windows, and DirectFB. This patch is based on work in Unreal Engine 4's fork of SDL, compliments of Epic Games.

dc532c70

2016-01-05T02:27:50

Added SDL_WINDOWEVENT_TAKE_FOCUS. This is for corner cases where a multi-window app is activated and wants to make a decision about where focus should go. This patch came from Unreal Engine 4's fork of SDL, compliments of Epic Games.

f9af0c03

2016-01-05T02:27:26

x11: Put a matching window_group wmhint on every window created. This is useful to the Window Manager, so it can know to associate multiple SDL windows with a single app.

f2defe5e

2016-01-05T01:30:40

Added special window type flags. Specifically: always on top, skip taskbar, tooltip, utility, and popup menu. This is currently only implemented for X11. This patch is based on work in Unreal Engine 4's fork of SDL, compliments of Epic Games.

6df5e1e5

2016-01-04T16:25:27

x11: Support _NET_WM_USER_TIME and give _NET_ACTIVE_WINDOW a valid timestamp. Fixes Bugzilla #3056.

42065e78

2016-01-02T10:10:34

Updated copyright to 2016

81457603

2015-08-15T00:36:39

X11: Handle keyboard layout changing during app's run on Ubuntu 12.04 (etc). Fixes Bugzilla #3050 (in addition to Jason Wyatt's patch, prior to this).

0e45984f

2015-06-21T17:33:46

Fixed crash if initialization of EGL failed but was tried again later. The internal function SDL_EGL_LoadLibrary() did not delete and remove a mostly uninitialized data structure if loading the library first failed. A later try to use EGL then skipped initialization and assumed it was previously successful because the data structure now already existed. This led to at least one crash in the internal function SDL_EGL_ChooseConfig() because a NULL pointer was dereferenced to make a call to eglBindAPI().

2a757825

2015-05-28T00:30:21

X11: Add Xdbe support to message boxes (thanks, Melker!). Without this, message boxes with a lot of text will noticibly flicker as you mouse over buttons. Fixes Bugzilla #2343.

2c4a6ea0

2015-05-26T06:27:46

Updated the copyright year to 2015

8875a401

2015-04-22T16:50:48

x11: Optimize SDL_GetGlobalMouseState() a little. Use XInput2 to mark the global mouse state as dirty so we don't have to make a bunch of roundtrips to the X server when nothing has changed.

b72938c8

2015-04-20T12:22:44

Windows: Always set the system timer resolution to 1ms by default. An existing hint lets apps that don't need the timer resolution changed avoid this, to save battery, etc, but this fixes several problems in timing, audio callbacks not firing fast enough, etc. Fixes Bugzilla #2944.

fe6c797c

2015-04-10T23:30:31

Fixed an iOS view orientation issue when SDL_GL_CreateContext or SDL_CreateRenderer is called.

b88ca1b4

2015-02-10T16:28:56

the last parameter of XChangeProperty is the number of elements.. and when the element format is 32.. the element is "long" so we have 5 long elements here. Yes this seems confusing as on mac+linux Long is either 32 or 64bits depending on the architecture, but this is how the X11 protocol is defined. Thus 5 is the correct value for the nelts here. Not 5 or 10 depending on the architecture. More info on the confusion https://bugs.freedesktop.org/show_bug.cgi?id=16802

203ea981

2015-01-26T17:46:39

X11: Don't delay delivery of focus events unless we just changed vidmodes. Normally there's a 200 millisecond delay on all focus events in case there was a vidmode change, now we note the last vidmode change and only impose this delay if a change happened extremely recently. Thanks to Epic Games for reporting this issue.

b48e54aa

2015-01-26T22:00:29

Fixed bug 2802 - [patch] Fix android build compiling in wrong filesystem implementation Jonas Kulla The configure script didn't differentiate between Linux and Android, unconditionally compiling in the unix implementation of SDL_sysfilesystem.c. I'm probably one of the very few people building SDL for android using classic configure + standalone toolchain, so this has gone undetected all along.

70438be2

2014-12-03T10:55:23

WinRT: fixed bug whereby SDL would override an app's default orientation WinRT apps can set a default, preferred orientation via a .appxmanifest file. SDL was overriding this on app startup, and making the app use all possible orientations (landscape and portrait). Thanks to Eric Wing for the heads up on this!

9c398852

2014-11-22T22:20:40

Corrected header file documentation comment.

24c86b55

2014-09-11T19:24:42

[X11] Reconcile logical keyboard state with physical state on FocusIn since the window system doesn't do it for us like other platforms. This prevents sticky keys and missed keys when going in and out of focus, for example Alt would appear to stick if switching away from an SDL app with Alt-Tab and had to be pressed again. CR: Sam

b56b37cd

2014-06-21T17:25:59

Fixed warning when building without ibus

41a39837

2014-06-18T20:11:39

Add IBus IME Support, move DBus code to its own file. (v3.3 squashed)

3dcb451f

2014-04-09T21:29:19

Added a README file regarding WinRT support To note, this file is currently formatted with CRLF line endings, rather than LF, to allow the file to be viewed with Notepad.

4ca76b3e

2014-03-02T14:59:06

Add support for the freedesktop.org Idle Inhibition specification, as per: http://people.freedesktop.org/~hadess/idle-inhibition-spec/ This makes screensaver inhibition work with GNOME 3 and other desktop environments that implement the specification. https://bugzilla.libsdl.org/show_bug.cgi?id=2169

abe2ac2c

2014-02-21T08:37:57

Fixes #2326, clean up the X11 backend a bit

58edac3e

2014-02-02T00:53:27

f848adff

2013-11-29T10:06:08

Improve Android pause/resume behavior.

7e1289af

2013-11-24T23:56:17

Make internal SDL sources include SDL_internal.h instead of SDL_config.h The new header will include SDL_config.h, but allows for other global stuff.

dad42067

2013-08-12T11:13:50

Fixes #2022, do not resume on Android when surfaceChanged If the app is in landscape mode and the user presses the power button, a pause is followed immediately by a surfaceChanged event because the lock screen is shown in portrait mode. This triggers a "false" resume. So, we just pause and resume following the onWindowFocusChanged events. Also, wait for SDL_APP_WILLENTERBACKGROUND and SDL_APP_DIDENTERBACKGROUND before blocking the event pump.

1ad936eb

2013-08-11T19:56:43

Fixed bug 2027 - Full-screen appears to be broken - hang in SDL_DestroyWindow() Rainer Deyke I'm running Linux Mint 15 with the Cinnamon window manager. SDL_DestroyWindow consistently locks up for me when the window if fullscreen.

kc3-lang/SDL/src/video/x11/SDL_x11video.h

src/video/x11/SDL_x11video.h

Log