|
5b314268
|
2021-06-15T17:37:45
|
|
Vulkan: Support OVR_multiview and OVR_multiview2
Multiview is supported in Vulkan simply by specifying the number of
views in the render pass, and creating the appropriate image views. A
number of changes to the way image views and render targets are stored
are made to support those that don't cover the entire range of layers.
One particular detail that is not implemented in this change is the use
of queries in combination with multiview. Vulkan specifies that N
queries are actually produced (N being the number of views) which must
be summed by the application, but this is not currently done.
Bug: angleproject:6048
Change-Id: I1d4a9894c232d3a93d7a97c9fa0eedc334e57469
Reviewed-on: https://chromium-review.googlesource.com/c/angle/angle/+/2967625
Commit-Queue: Shahbaz Youssefi <syoussefi@chromium.org>
Reviewed-by: Jamie Madill <jmadill@chromium.org>
Reviewed-by: Charlie Lao <cclao@google.com>
|
|
15623ada
|
2021-06-23T08:46:21
|
|
Test Runner: Omit results files when too many failures.
This will cause the test shards to be re-tried due to an invalid
result. The goal is to retry flaky configs where whole shards fail.
Bug: angleproject:6075
Change-Id: I76d0f08da29ffc4bcad7f282f7be38618c384bce
Reviewed-on: https://chromium-review.googlesource.com/c/angle/angle/+/2982500
Reviewed-by: Shahbaz Youssefi <syoussefi@chromium.org>
Reviewed-by: Jonah Ryan-Davis <jonahr@google.com>
Commit-Queue: Jamie Madill <jmadill@chromium.org>
|
|
09bd5578
|
2021-06-21T23:47:15
|
|
Test runner: Capture test stderr
With this change, stderr is also output when a test fails, including
logs such as those originating from UNIMPLEMENTED().
Bug: angleproject:6077
Change-Id: Ice1e1f9aff26acfb630aef99865503643f0a9658
Reviewed-on: https://chromium-review.googlesource.com/c/angle/angle/+/2976184
Commit-Queue: Shahbaz Youssefi <syoussefi@chromium.org>
Reviewed-by: Jamie Madill <jmadill@chromium.org>
|
|
72d2bd0c
|
2021-06-21T09:59:21
|
|
Allow capturing process stdout and stderr interleaved
The test utils are enhanced to allow redirecting stderr to stdout. This
is in preparation for a change that makes the test runner capture stderr
together with stdout. Currently, on failure logs originating from
UNIMPLEMENTED() and other such macros are not captured.
Bug: angleproject:6077
Change-Id: I7a3c6c4732a59dac3ff0cc20a7835d5ed6f0f22e
Reviewed-on: https://chromium-review.googlesource.com/c/angle/angle/+/2976183
Reviewed-by: Jamie Madill <jmadill@chromium.org>
Commit-Queue: Shahbaz Youssefi <syoussefi@chromium.org>
|
|
4194d400
|
2021-06-21T13:08:56
|
|
Test Runner: Add maximum failure count.
This will make the test runner early exit after a certain count
of failures. This will prevent the bots from running tens of
thousands of tests when the whole test run is corrupt.
Bug: angleproject:6075
Change-Id: I8f5c19ea694a5ad3a5d5df1429d2ba4b1fe868e3
Reviewed-on: https://chromium-review.googlesource.com/c/angle/angle/+/2976179
Commit-Queue: Jamie Madill <jmadill@chromium.org>
Reviewed-by: Shahbaz Youssefi <syoussefi@chromium.org>
Reviewed-by: Jonah Ryan-Davis <jonahr@google.com>
|
|
7df7fc7f
|
2021-06-20T00:05:28
|
|
Tests: Add support for --renderdoc
This change adds support for a new flag namely `--renderdoc` to end2end
and deqp tests. With this flag, each test automatically starts and ends
a frame capture in renderdoc, working around an issue where renderdoc
refuses to capture a test frame that doesn't start or end with a swap.
With end2end tests, the capture starts before test set up, and ends
after test tear down. With deqp tests, it starts before init, ends and
restarts after each test iteration and ends after deinit.
Bug: angleproject:6072
Change-Id: Ib41b816aff121bf922d9147044cc363c33a62181
Reviewed-on: https://chromium-review.googlesource.com/c/angle/angle/+/2971835
Commit-Queue: Shahbaz Youssefi <syoussefi@chromium.org>
Reviewed-by: Cody Northrop <cnorthrop@google.com>
Reviewed-by: Jamie Madill <jmadill@chromium.org>
|
|
c51c59c7
|
2021-06-15T13:43:50
|
|
Test for missing index dirty bit bug
Bug fixed in
https://chromium-review.googlesource.com/c/angle/angle/+/2961690
triggers only in the following situation:
- Context 1: draw indexed -> clears index dirty bit
- Context 1: change state in such a way that closing the render pass is
deferred to dirty bit handling (for example, change FBO)
- Context 1: issue a non-indexed draw call. This closes the render pass
and starts a new one -> bug was that the index dirty bit
was not set
- Context 2: flush the command buffer, which submits the previous render
pass of context 1 (which contained vkCmdBindIndexBuffer).
The primary command buffer is now reset.
- Context 1: issue an indexed draw call. Since the index dirty bit was
not set, this was missing the vkCmdBindIndexBuffer call.
This change implements a regression test based on the above scenario.
Bug: chromium:1183068
Bug: chromium:1190493
Change-Id: I729bd48cd6df2621ca763f6231023a52ac08b0fb
Reviewed-on: https://chromium-review.googlesource.com/c/angle/angle/+/2963836
Reviewed-by: Shahbaz Youssefi <syoussefi@chromium.org>
Reviewed-by: Charlie Lao <cclao@google.com>
Commit-Queue: Shahbaz Youssefi <syoussefi@chromium.org>
|
|
8b869a95
|
2021-06-13T01:09:27
|
|
Translator: Generate Ops for all built-in functions
EOpCallBuiltInFunction is removed in this change, as well as the
"op": "auto" property in builtin_function_declarations.txt. Instead,
gen_builtin_symbols.py automatically generates Ops for every built-in
function and generates the TOperator enum accordingly.
This simplifies SPIR-V code generation by allowing switches to be used
on operators instead of string comparisons.
Bug: angleproject:4589
Bug: angleproject:4889
Change-Id: Ia351524400b0e12a10a5572e27e9b88c6ec2e61c
Reviewed-on: https://chromium-review.googlesource.com/c/angle/angle/+/2958869
Commit-Queue: Shahbaz Youssefi <syoussefi@chromium.org>
Reviewed-by: Jonah Ryan-Davis <jonahr@google.com>
Reviewed-by: Tim Van Patten <timvp@google.com>
|
|
c670917c
|
2021-06-02T14:43:03
|
|
[Fuchsia] Cleanup vulkan_fuchsia_ext.h
Removed defintions of fuchsia-specific vulkan types from
vulkan_fuchsia_ext.h . Instead, the types provided by vulkan_fuchsia.h
are used now.
Also re-enabled vulkan validation on Fuchsia.
Bug: chromium:1215736
Change-Id: I795347b7fb61d90033749533cefd42cf180730fb
Reviewed-on: https://chromium-review.googlesource.com/c/angle/angle/+/2934718
Reviewed-by: Shahbaz Youssefi <syoussefi@chromium.org>
Commit-Queue: Shahbaz Youssefi <syoussefi@chromium.org>
|
|
6746e5dd
|
2021-06-01T22:48:14
|
|
Vulkan: SPIR-V Gen: Basic support for compute shaders
This change enables direct SPIR-V generation for compute shaders and
enables a few tests. A handful of built-in functions are translated to
support said tests.
Bug: angleproject:4889
Change-Id: I8fd6dc50ff31559a738ba680a993fb197e29fcf9
Reviewed-on: https://chromium-review.googlesource.com/c/angle/angle/+/2939330
Commit-Queue: Shahbaz Youssefi <syoussefi@chromium.org>
Reviewed-by: Jamie Madill <jmadill@chromium.org>
Reviewed-by: Tim Van Patten <timvp@google.com>
|
|
bc9d5223
|
2021-06-02T18:19:08
|
|
Experimental fix for stdout freopen race.
Bug: chromium:1213184
Change-Id: I2e2741f4100b2a5516210f2250dc82511fafd05b
Reviewed-on: https://chromium-review.googlesource.com/c/angle/angle/+/2933602
Commit-Queue: Jamie Madill <jmadill@chromium.org>
Reviewed-by: Yuly Novikov <ynovikov@chromium.org>
|
|
9bc837f6
|
2021-04-07T15:24:12
|
|
Vulkan: Generate SPIR-V directly from the translator; Part 1
This is the first change in a series to generate SPIR-V directly from
the translator's AST, instead of the generating text GLSL and feeding it
to glslang.
This change implements the majority of the work needed to map AST types
to SPIR-V types, and declare types and interface variables in SPIR-V.
Additionally, it lays the infrastructure to conditionally enabling this
path in end2end tests.
No tests are currently enabled as the change doesn't actually generate
code for function bodies yet.
Bug: angleproject:4889
Change-Id: Iacb28b6907fd48c50e4cc5a0e7ad72f6eed241d4
Reviewed-on: https://chromium-review.googlesource.com/c/angle/angle/+/2889603
Commit-Queue: Shahbaz Youssefi <syoussefi@chromium.org>
Reviewed-by: Tim Van Patten <timvp@google.com>
Reviewed-by: Jamie Madill <jmadill@chromium.org>
|
|
328a5c89
|
2021-05-18T12:13:23
|
|
infra: Add tests to Android Pixel 4 bot.
Only angle_end2end_tests and angle_unittests to start.
Also adds test expectations for the Pixel 4 end2end_tests.
Patch Series:
1. http://crrev.com/c/2885381
2. http://crrev.com/c/2885346
3. http://crrev.com/c/2885383
4. This CL
Bug: angleproject:5941
Bug: angleproject:5946
Bug: angleproject:5947
Bug: angleproject:5981
Change-Id: Iaaea0b427513804575d0ad7773a81379ea932eb5
Reviewed-on: https://chromium-review.googlesource.com/c/angle/angle/+/2885384
Commit-Queue: Jamie Madill <jmadill@chromium.org>
Reviewed-by: Geoff Lang <geofflang@chromium.org>
Reviewed-by: Yuly Novikov <ynovikov@chromium.org>
|
|
8bd3d7d5
|
2021-05-17T13:45:33
|
|
Vulkan: Fix a bug releasing DynamicBuffer-owned buffer
There was one instance of BufferVk releasing a buffer it had allocated
from a DynamicBuffer. This shouldn't have happened as the DynamicBuffer
owns the buffers.
Bug: angleproject:5720
Change-Id: I435512f4bb099130126bf3efb48a238fcd9f3ddb
Reviewed-on: https://chromium-review.googlesource.com/c/angle/angle/+/2896168
Commit-Queue: Shahbaz Youssefi <syoussefi@chromium.org>
Reviewed-by: Mohan Maiya <m.maiya@samsung.com>
Reviewed-by: Jamie Madill <jmadill@chromium.org>
|
|
49ad51fb
|
2021-05-17T16:39:17
|
|
ANGLETest: Skip test setup/teardown on major error.
If something goes wrong in ANGLETestSetup, we can skip the test-
specific setup and teardown code to prevent further errors and
crashes. This is necessary for the new test expectation skips.
Bug: angleproject:5951
Change-Id: Ica7b9fed18cec20e7d0e340c39dbbb44f1f8958e
Reviewed-on: https://chromium-review.googlesource.com/c/angle/angle/+/2896173
Reviewed-by: Yuly Novikov <ynovikov@chromium.org>
Commit-Queue: Jamie Madill <jmadill@chromium.org>
|
|
dd686e48
|
2021-05-11T19:08:01
|
|
Test Runner: Add test expectations parser.
Moves the test expectations from dEQP into the test runner.
Also updates angle_end2end_tests to take an expectations file.
Includes some very simple angle_end2end_tests expectations.
Note that the expectations in the file are less expressive than the
skips we use in the cpp.
Bug: angleproject:5951
Change-Id: Ib92235575bc3ea5f3a977ce416b0e78fe806e39b
Reviewed-on: https://chromium-review.googlesource.com/c/angle/angle/+/2892274
Commit-Queue: Jamie Madill <jmadill@chromium.org>
Reviewed-by: Geoff Lang <geofflang@chromium.org>
Reviewed-by: Jonah Ryan-Davis <jonahr@google.com>
|
|
1d019f49
|
2021-05-13T10:33:06
|
|
Test Runner: Fixes to skipped tests.
Uses a different token for skipped and not run tests in the json. The
token isn't standard but should only be visible when batches report
to the parent process that a test wasn't run. It shouldn't be visible
to the scripts that consume test results on the bots.
Also fixes the expected result for skipped tests to also be "SKIP".
Bug: angleproject:5951
Change-Id: I0bd7d13b2b25b583f9c42718786cb588bacd4bc6
Reviewed-on: https://chromium-review.googlesource.com/c/angle/angle/+/2894524
Reviewed-by: Yuly Novikov <ynovikov@chromium.org>
Commit-Queue: Jamie Madill <jmadill@chromium.org>
|
|
9a219a14
|
2021-05-12T09:52:16
|
|
Test Runner: Handle skipped gtests.
GTEST_SKIP() allows us to skip tests using the GoogleTest APIs.
This CL updates our test runner code to handle these skips.
Bug: angleproject:5951
Change-Id: Idef5802c7c81bd92226f5a93281a1cea0f1b24ee
Reviewed-on: https://chromium-review.googlesource.com/c/angle/angle/+/2892272
Reviewed-by: Geoff Lang <geofflang@chromium.org>
Reviewed-by: Jonah Ryan-Davis <jonahr@google.com>
Commit-Queue: Jamie Madill <jmadill@chromium.org>
|
|
74177f31
|
2021-05-09T21:15:09
|
|
Tests: Run Android tests fullscreen
In order to hide the status bar and hopefully prevent any layers from
rendering on top of our traces, make all Android tests run fullscreen.
Test: angle_perftests
Bug: angleproject:5937
Change-Id: I649104a7d95b7f056b411e180632524a85b7c4f2
Reviewed-on: https://chromium-review.googlesource.com/c/angle/angle/+/2880335
Reviewed-by: Jamie Madill <jmadill@chromium.org>
Reviewed-by: Tim Van Patten <timvp@google.com>
Commit-Queue: Cody Northrop <cnorthrop@google.com>
|
|
7828506a
|
2021-04-06T23:42:16
|
|
Vulkan: Cleanup buffer format fallbacks
- Fallbacks for formats that have required vertex attribute support are
removed.
- Fallbacks are changed to ones with smaller sizes
- A bug is fixed where CopyNativeVertexData wasn't initializing the
alpha channel appropriately, which was not exercised due to fallback
to 32-bit float formats.
Bug: b/184163871
Change-Id: Icd9afa49d94c65545d1f3fcf521881726d64529d
Reviewed-on: https://chromium-review.googlesource.com/c/angle/angle/+/2809441
Reviewed-by: Tim Van Patten <timvp@google.com>
Reviewed-by: Jamie Madill <jmadill@chromium.org>
Commit-Queue: Shahbaz Youssefi <syoussefi@chromium.org>
|
|
a878e814
|
2021-04-11T15:04:19
|
|
Metal: Distinguish Metal backend from OpenGL's Metal driver
On macOS 11+ OpenGL is implemented on top of Metal internally.
This CL changes ANGLE's Metal backend's renderer string to better
differentiate it from the above OpenGL renderer.
Bug: angleproject:5841
Change-Id: I0d5466594e385cb663d537db034c82b006b6e907
Reviewed-on: https://chromium-review.googlesource.com/c/angle/angle/+/2820179
Reviewed-by: Jamie Madill <jmadill@chromium.org>
Reviewed-by: Jonah Ryan-Davis <jonahr@google.com>
|
|
c8ee13c7
|
2021-04-02T12:19:33
|
|
Vulkan: Fix a validation bug in glBeginTransformFeedback
Add logic to check the program or the pipeline before erroring out when
validating glBeginTransformFeedeback.
Bug: angleproject:5557
Test: ProgramPipelineXFBTest31.VaryingIOBlockSeparableProgramWithXFB*
Change-Id: I0df8a8d87b3632745bc91dc2673f2fac31c6cdb1
Reviewed-on: https://chromium-review.googlesource.com/c/angle/angle/+/2743440
Reviewed-by: Shahbaz Youssefi <syoussefi@chromium.org>
Reviewed-by: Jamie Madill <jmadill@chromium.org>
Reviewed-by: Tim Van Patten <timvp@google.com>
Commit-Queue: Mohan Maiya <m.maiya@samsung.com>
|
|
18c6d628
|
2021-03-09T13:46:13
|
|
GL: Support VAOs without native VAOs.
Share the default VAO state between all frontend VAO when
there is no native VAO support. Forcefully sync state every
time a new frontend VAO is bound.
Bug: angleproject:5577, chromium:1167179
Change-Id: Ieaedb5108ad28fc78e7e58b74495639c5246bb05
Reviewed-on: https://chromium-review.googlesource.com/c/angle/angle/+/2665266
Reviewed-by: Jonah Ryan-Davis <jonahr@google.com>
Reviewed-by: Peng Huang <penghuang@chromium.org>
Commit-Queue: Geoff Lang <geofflang@chromium.org>
|
|
fc189386
|
2021-04-08T21:51:46
|
|
Revert "Fix multithreaded crash on draw commands on D3D11 backend."
This reverts commit 8b9889bf62272fea2495331b622bde1f7c781bd0.
Reason for revert: Breaks CI
Original change's description:
> Fix multithreaded crash on draw commands on D3D11 backend.
>
> A crash can occur if thread A is executing eglDestroyContext while
> thread B issues a draw call, if the threads are interleaved in such a
> manner that a makeCurrent occurs without triggering a change to the
> global context and a dirtyAllState call. We handle that case by
> explicitly making current the proper contexts in the eglDestroyContext
> call.
>
> A test has been added that triggers a crash without this fix when
> running on the D3D11 backend. In addition, all of MultithreadingTest
> is enabled for the D3D11 backend.
>
> Test: Ran MultithreadingTest. Test exhibits a crash before this
> change, and does not after this change. Also ran:
> dEQP-EGL.functional.sharing.gles2.multithread.*
> dEQP-EGL.functional.multithread.*
>
> Bug: b/183756357
> Change-Id: Ic6f76a062868b2f3b4e60d29dc087ec180bfb7cd
> Reviewed-on: https://chromium-review.googlesource.com/c/angle/angle/+/2798591
> Reviewed-by: Geoff Lang <geofflang@chromium.org>
> Reviewed-by: Jamie Madill <jmadill@chromium.org>
> Commit-Queue: Doug Horn <doughorn@google.com>
Bug: b/183756357
Change-Id: I2e9d6385576330f84623d7dafbf690642fcb441f
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Reviewed-on: https://chromium-review.googlesource.com/c/angle/angle/+/2815242
Commit-Queue: Doug Horn <doughorn@google.com>
Bot-Commit: Rubber Stamper <rubber-stamper@appspot.gserviceaccount.com>
|
|
8b9889bf
|
2021-03-31T12:52:00
|
|
Fix multithreaded crash on draw commands on D3D11 backend.
A crash can occur if thread A is executing eglDestroyContext while
thread B issues a draw call, if the threads are interleaved in such a
manner that a makeCurrent occurs without triggering a change to the
global context and a dirtyAllState call. We handle that case by
explicitly making current the proper contexts in the eglDestroyContext
call.
A test has been added that triggers a crash without this fix when
running on the D3D11 backend. In addition, all of MultithreadingTest
is enabled for the D3D11 backend.
Test: Ran MultithreadingTest. Test exhibits a crash before this
change, and does not after this change. Also ran:
dEQP-EGL.functional.sharing.gles2.multithread.*
dEQP-EGL.functional.multithread.*
Bug: b/183756357
Change-Id: Ic6f76a062868b2f3b4e60d29dc087ec180bfb7cd
Reviewed-on: https://chromium-review.googlesource.com/c/angle/angle/+/2798591
Reviewed-by: Geoff Lang <geofflang@chromium.org>
Reviewed-by: Jamie Madill <jmadill@chromium.org>
Commit-Queue: Doug Horn <doughorn@google.com>
|
|
bf0c6ae1
|
2021-03-09T13:21:58
|
|
Improve Angle Android gtest support
This CL makes angle_test() use an angle-specific gtest launcher -
AngleUnitTestActivity.java. This enables building standalone Android
angle without //base
Chromium-Bug: 1149922
Bug: None
Change-Id: Id84f3e2bd84c5017ed1988ca07534f424ebfa596
Reviewed-on: https://chromium-review.googlesource.com/c/angle/angle/+/2745535
Reviewed-by: Jamie Madill <jmadill@chromium.org>
Reviewed-by: Geoff Lang <geofflang@chromium.org>
Commit-Queue: Jamie Madill <jmadill@chromium.org>
|
|
776c6015
|
2021-02-26T00:00:57
|
|
Vulkan: Call glslang at compile time
With this change, the ANGLE translator immediately compiles the
generated GLSL into SPIR-V with glslang and discards the source. This
is in preparation for generating SPIR-V directly, by making the frontend
and backend already able to digest it.
This change also allows the expensive glslang calls to be parallelized,
improving the following perf test by about 20%:
LinkProgramBenchmark.Run/vulkan_compile_and_link_multi_thread
Previously, the test was run as such in the Vulkan backend:
Main Thread 1 Thread 2
Compile1 --->
Compile2 --------------------->
Translator Translator
<---
<---------------------
Link
glslang
for
shader1
glslang
for
shader2
Done
With this change, it is run as such:
Main Thread 1 Thread 2
Compile1 --->
Compile2 --------------------->
Translator Translator
glslang glslang
<---
<---------------------
Link
Done
glslang_wrapper_utils no longer interacts with glslang! A rename will
follow.
Bug: angleproject:4889
Change-Id: If4303e8ba0ba43b1a2f47f8c0a9133d0bee1a19a
Reviewed-on: https://chromium-review.googlesource.com/c/angle/angle/+/2721195
Commit-Queue: Shahbaz Youssefi <syoussefi@chromium.org>
Reviewed-by: Tim Van Patten <timvp@google.com>
Reviewed-by: Jamie Madill <jmadill@chromium.org>
|
|
dd5705e7
|
2021-03-24T08:18:24
|
|
Add missing qualifier type handling in translator
Translator checks tessellation shader unsized array type qualifier.
sample in/sample out were missing in handling qualifier type.
Bug: angleproject:5557
Test: GLSLTest_ES31.VaryingTessellationSampleInAndOut*
Change-Id: I8a2f2c4c4fcc9cc88000d3b2d448ab51fb9e5d38
Reviewed-on: https://chromium-review.googlesource.com/c/angle/angle/+/2776263
Reviewed-by: Shahbaz Youssefi <syoussefi@chromium.org>
Reviewed-by: Jamie Madill <jmadill@chromium.org>
Commit-Queue: Mohan Maiya <m.maiya@samsung.com>
|
|
baf64903
|
2021-02-03T14:02:55
|
|
Allow small compressed mip level copies
Update ValidateCopyImageSubDataBase() to take into consideration if the
entire mip level is being written, even if the size of the mip level is
smaller than the compressed block size.
This also uncovered a bug in ImageHelper::initializeNonZeroMemory()
where the image extents are not at least as large as the compressed
format block size:
VUID-vkCmdCopyBufferToImage-imageExtent-00207
This CL adds isAllocateNonZeroMemoryEnabled() to allow skipping the test
when that feature is enabled while that bug is chased.
Bug: angleproject:5592
Bug: angleproject:5634
Bug: angleproject:5643
Test: Texture2DTestES3.CopyCompressedImageMipMaps
Change-Id: I0381e0d3490fb148604b61dc3bae8f96ba8b5f8e
Reviewed-on: https://chromium-review.googlesource.com/c/angle/angle/+/2673069
Commit-Queue: Tim Van Patten <timvp@google.com>
Reviewed-by: Cody Northrop <cnorthrop@google.com>
Reviewed-by: Jamie Madill <jmadill@chromium.org>
|
|
a8a2a71b
|
2021-02-01T17:18:18
|
|
Vulkan: Support y-flip with no driver support.
We can reuse the surface rotation matrix code to do the y-flip.
This requires the SPIR-V transformation support. Because not
all rotations are encoded into the table we can only support
rotation with the driver support for y-flip (currently).
Includes some very minimal regression testing. This work is
targeted towards supporting vk-portability implementations
which are not as up-to-date with Vulkan features.
Bug: angleproject:5596
Change-Id: I270fa1efc03267551d28df33ddac9972e1343d60
Reviewed-on: https://chromium-review.googlesource.com/c/angle/angle/+/2665892
Reviewed-by: Shahbaz Youssefi <syoussefi@chromium.org>
Reviewed-by: Ian Elliott <ianelliott@google.com>
Commit-Queue: Jamie Madill <jmadill@chromium.org>
|
|
e5c5efc0
|
2021-02-05T02:39:55
|
|
Revert "Test Runner: Pick single/multi-process mode automatically."
This reverts commit 573d7f34a462fa5b2ca767dd84773ae6fa460d8a.
Reason for revert: Breaking ANGLE roll.
No-try: true
Original change's description:
> Test Runner: Pick single/multi-process mode automatically.
>
> This enables multi-process when running with more than one test
> config. This saves developers from remembering to add the arg.
> It can also simplify our test configurations by allowing us to omit
> the default arguments. On Android by default we stay with single
> process. It also changes the --bot-mode flag into --single-process
> and --multi-process which override the default behaviour.
>
> Bug: angleproject:5585
> Change-Id: I3dd885a8a8e6604c224693c546ff5d15224e016e
> Reviewed-on: https://chromium-review.googlesource.com/c/angle/angle/+/2664246
> Reviewed-by: Shahbaz Youssefi <syoussefi@chromium.org>
> Reviewed-by: Jonah Ryan-Davis <jonahr@google.com>
> Reviewed-by: Kenneth Russell <kbr@chromium.org>
> Commit-Queue: Jamie Madill <jmadill@chromium.org>
TBR=kbr@chromium.org,syoussefi@chromium.org,jonahr@google.com,jmadill@chromium.org,jonahr@chromium.org
# Not skipping CQ checks because original CL landed > 1 day ago.
Bug: angleproject:5585
Change-Id: I11ee1034c301aa246c4b03e29ff9b56235a1005c
Reviewed-on: https://chromium-review.googlesource.com/c/angle/angle/+/2676247
Reviewed-by: Jamie Madill <jmadill@chromium.org>
|
|
573d7f34
|
2021-02-01T10:36:56
|
|
Test Runner: Pick single/multi-process mode automatically.
This enables multi-process when running with more than one test
config. This saves developers from remembering to add the arg.
It can also simplify our test configurations by allowing us to omit
the default arguments. On Android by default we stay with single
process. It also changes the --bot-mode flag into --single-process
and --multi-process which override the default behaviour.
Bug: angleproject:5585
Change-Id: I3dd885a8a8e6604c224693c546ff5d15224e016e
Reviewed-on: https://chromium-review.googlesource.com/c/angle/angle/+/2664246
Reviewed-by: Shahbaz Youssefi <syoussefi@chromium.org>
Reviewed-by: Jonah Ryan-Davis <jonahr@google.com>
Reviewed-by: Kenneth Russell <kbr@chromium.org>
Commit-Queue: Jamie Madill <jmadill@chromium.org>
|
|
85efb9d5
|
2021-01-26T14:39:19
|
|
Log dEQP QPA files as test artifacts.
This adds artifact output to the test runner. We add a fake test
at the start of a test run that owns the artifacts.
Bug: angleproject:5236
Change-Id: Ice8001bf1f2aafbd8123fee76e0e7fcc3e5a8a0c
Reviewed-on: https://chromium-review.googlesource.com/c/angle/angle/+/2657535
Commit-Queue: Jamie Madill <jmadill@chromium.org>
Reviewed-by: Shahbaz Youssefi <syoussefi@chromium.org>
Reviewed-by: Mohan Maiya <m.maiya@samsung.com>
Reviewed-by: Yuly Novikov <ynovikov@chromium.org>
|
|
a5ab7974
|
2021-01-28T12:32:10
|
|
Turn on vulkan backend for android ndk level < 26
Fixes two issue for build Vulkan backend for android ndk level < 26,
* Disable Vulkan validation layers for android ndk level < 26
* Share vulkan memory allocator implementation with chrome to avoid
duplicated symbols link errors.
* Only run vulkan backend test with Android P or newer
Note: This change will break android-binary-size try bot, we need to
update expected_static_initializer_count to 4 at [1] while rolling this
change into chromium.
[1] https://source.chromium.org/chromium/chromium/src/+/master:chrome/android/static_initializers.gni;l=19?q=expected_static_initializer_count&ss=chromium%2Fchromium%2Fsrc
Bug: chromium:1170339
Change-Id: Idb9238d8f339724c4d8f9ac136305b95ff06fae4
Reviewed-on: https://chromium-review.googlesource.com/c/angle/angle/+/2656980
Commit-Queue: Peng Huang <penghuang@chromium.org>
Reviewed-by: Jamie Madill <jmadill@chromium.org>
|
|
feb470cc
|
2021-01-19T10:10:18
|
|
Test Runner: Prevent race by not resetting timeout.
This instead only sets the timeout when tests start to run. That
way the timeout should always be at least the default timeout
and we won't get into a situation where the watchdog times out
the test immediately when the test starts.
Bug: angleproject:5562
Change-Id: I6b12bb8fe8edcf35f46ba4fb106fdf80ff9402a1
Reviewed-on: https://chromium-review.googlesource.com/c/angle/angle/+/2637182
Reviewed-by: Yuly Novikov <ynovikov@chromium.org>
Commit-Queue: Jamie Madill <jmadill@chromium.org>
|
|
e4b4ff7a
|
2021-01-12T13:48:20
|
|
Test Runner: Add a slow tests list.
Each slow test in the list will use a 3x longer timeout. The list is
implemented using the same filter wildcard we use in the test
expectations logic.
We can test this out using a slow D3D11 varying test.
Bug: angleproject:5076
Bug: angleproject:5496
Change-Id: I31cf45e6ee8a8bbd6e460d675ff8a0cf5f19a504
Reviewed-on: https://chromium-review.googlesource.com/c/angle/angle/+/2625172
Commit-Queue: Jamie Madill <jmadill@chromium.org>
Reviewed-by: Shahbaz Youssefi <syoussefi@chromium.org>
Reviewed-by: Yuly Novikov <ynovikov@chromium.org>
|
|
43366979
|
2021-01-08T15:39:02
|
|
Add OWNERS info for Vulkan test utils.
Bug: chromium:1164084
Change-Id: I83cb75f2a0b4ad3f616d1b64beb34310cc23dd12
Reviewed-on: https://chromium-review.googlesource.com/c/angle/angle/+/2618202
Reviewed-by: Jamie Madill <jmadill@chromium.org>
Commit-Queue: Jamie Madill <jmadill@chromium.org>
|
|
fa449cf3
|
2021-01-06T10:02:12
|
|
Fix separable Geometry Shaders.
Was a needed fix for a new varying test.
Bug: angleproject:3571
Bug: angleproject:5496
Change-Id: I49ae69967510b7a6330ea217a0e0e19e3bebe865
Reviewed-on: https://chromium-review.googlesource.com/c/angle/angle/+/2613198
Reviewed-by: Tim Van Patten <timvp@google.com>
Reviewed-by: Shahbaz Youssefi <syoussefi@chromium.org>
Commit-Queue: Jamie Madill <jmadill@chromium.org>
|
|
3e33db95
|
2020-12-30T17:17:17
|
|
Merge Program/ProgramPipeline::getMergedVaryings().
This merges two very similar pieces of code into one simpler function.
The function doesn't use any maps or indirection to build the merged
varyings list. It also fixes a potential bug with IO blocks and name
matching due to the code bifurcation.
Bug: angleproject:5496
Change-Id: Ibf54faeeb01d1940570b366ed153fff7c9135c52
Reviewed-on: https://chromium-review.googlesource.com/c/angle/angle/+/2606533
Commit-Queue: Jamie Madill <jmadill@chromium.org>
Reviewed-by: Tim Van Patten <timvp@google.com>
Reviewed-by: Shahbaz Youssefi <syoussefi@chromium.org>
|
|
939195a0
|
2020-12-23T15:12:30
|
|
Skip tests using unimplemented features on iOS
Bug: angleproject:5485
Change-Id: I3248126060b9957596f65221c60f42f213e9a9dc
Reviewed-on: https://chromium-review.googlesource.com/c/angle/angle/+/2601377
Reviewed-by: Kenneth Russell <kbr@chromium.org>
Reviewed-by: Jonah Ryan-Davis <jonahr@google.com>
Commit-Queue: James Darpinian <jdarpinian@chromium.org>
|
|
8065aa82
|
2020-12-22T23:38:42
|
|
Front-end support for xfb capture of I/O block members
Validation and generation of transform feedback varyings that specify an
I/O block member are implemented in this change. The GL backend is able
to pass the added tests.
Bug: angleproject:3606
Change-Id: I66d02bed8ca9161555d0d1e7a32ae9ef4d9e813f
Reviewed-on: https://chromium-review.googlesource.com/c/angle/angle/+/2599952
Commit-Queue: Shahbaz Youssefi <syoussefi@chromium.org>
Reviewed-by: Jamie Madill <jmadill@chromium.org>
Reviewed-by: Tim Van Patten <timvp@google.com>
|
|
cb8903b1
|
2020-12-08T01:08:00
|
|
Metal: Ignore OS's internal shader cache when testing.
Internal shader cache caused timeout in some dEQP tests.
Work-around: ignore the cache by hooking fopen function and return null
when the cache related files are accessed.
Bug: angleproject:5354
Change-Id: I12ca228540925e67454bf24ce1ba83d703882c87
Reviewed-on: https://chromium-review.googlesource.com/c/angle/angle/+/2580918
Commit-Queue: Le Hoang Quyen <le.hoang.q@gmail.com>
Reviewed-by: Jamie Madill <jmadill@chromium.org>
Reviewed-by: Kenneth Russell <kbr@chromium.org>
|
|
f691b3b5
|
2020-12-02T13:11:54
|
|
Vulkan: Support PrimitivesGenerated query
This query uses the Vulkan transform feedback extension. In GL,
GL_TRANSFORM_FEEDBACK_PRIMITIVES_WRITTEN and GL_PRIMITIVES_GENERATED
queries can be independently begun/ended. However, Vulkan requires that
queries from pools of the same type can only be active one at a time.
This forbids the two GL queries from being handled by two VK queries
when they are simultaneously begun.
This change makes these queries share their QueryHelper objects. The
Vulkan transform feedback queries unconditionally retrieve both results
anyway, so this is just a matter of making sure the two GL queries are
merged as one when they are simultaneously used.
The change fixes a number of issues as collateral:
- TransformFeedbackPrimitivesWritten queries when !emulated were not
released
- Stashed queries were never released
- If no render pass is open when a query ends, then getResult(no_wait)
ended up waiting
Bug: angleproject:5404
Change-Id: I8ce13ea76ffd31b3152ded7c713c6466d0315504
Reviewed-on: https://chromium-review.googlesource.com/c/angle/angle/+/2573580
Commit-Queue: Shahbaz Youssefi <syoussefi@chromium.org>
Reviewed-by: Charlie Lao <cclao@google.com>
Reviewed-by: Jamie Madill <jmadill@chromium.org>
|
|
251ba5cb
|
2020-12-03T15:55:47
|
|
Vulkan: Fix transform feedback with in-render-pass clears
An in-render-pass clear now pauses transform feedback so it wouldn't
contribute to it. Since it's not possible to resume the transform
feedback in the same render pass (as it needs a memory barrier for its
counter buffer), the render pass is broken after the clear.
Bug: angleproject:5426
Change-Id: I1eaf8c153d076bd912a4a08c65960c12f00341ef
Reviewed-on: https://chromium-review.googlesource.com/c/angle/angle/+/2573579
Commit-Queue: Shahbaz Youssefi <syoussefi@chromium.org>
Reviewed-by: Charlie Lao <cclao@google.com>
Reviewed-by: Jamie Madill <jmadill@chromium.org>
|
|
c859c0ac
|
2020-11-24T17:21:38
|
|
Batch replace std::unordered_map with angle::HashMap in src/
There are a few places that will remain std::unordered_map due to build
or run-time errors, which will need to be evaluated more closely to
determine if they should remain std::unordered_map or if there is
another Abseil data structure that would be more efficient while still
working correctly.
Bug: angleproject:4873
Change-Id: Ib04253e3ad6398e63f4cc2bfe12c0f9e57cb112b
Reviewed-on: https://chromium-review.googlesource.com/c/angle/angle/+/2558873
Commit-Queue: Tim Van Patten <timvp@google.com>
Reviewed-by: Jamie Madill <jmadill@chromium.org>
Reviewed-by: Shahbaz Youssefi <syoussefi@chromium.org>
Reviewed-by: Charlie Lao <cclao@google.com>
|
|
9fe2d211
|
2020-12-01T13:24:33
|
|
Test Runner: Handle flaky failures.
When a test mark as flaky fails consistently we need to avoid marking
the test as flaky. We treat is as a deterministic failure. This means
we output "PASS" as the expected result instead of "PASS FAIL". That
change will produce the correct behaviour with the test scripts.
Also adds missing test runner output when we retry a flaky test.
Bug: chromium:1152515
Change-Id: I9e3cbaf04ea57a198717ee81505b5d63a9183410
Reviewed-on: https://chromium-review.googlesource.com/c/angle/angle/+/2568231
Reviewed-by: Yuly Novikov <ynovikov@chromium.org>
Reviewed-by: Jamie Madill <jmadill@chromium.org>
Commit-Queue: Jamie Madill <jmadill@chromium.org>
|
|
9041ca0c
|
2020-11-20T16:27:48
|
|
Limit testing of in-progress work to ANGLE's build of dEQP
A new feature is added, exposeNonConformantExtensionsAndVersions, which
is set by ANGLE's build of dEQP to allow exposing ES3.2 or extensions
that are not yet entirely conformant. This would allow ANGLE to expose
WIP extensions for regression testing without affecting partners that
test ANGLE with dEQP's standalone build.
Bug: angleproject:3647
Change-Id: Id1e6219f26b41d3f8cdc9763131b8052227761c5
Reviewed-on: https://chromium-review.googlesource.com/c/angle/angle/+/2552926
Commit-Queue: Shahbaz Youssefi <syoussefi@chromium.org>
Reviewed-by: Sunny Sun <sunny.sun@arm.com>
Reviewed-by: Jamie Madill <jmadill@chromium.org>
|
|
f98f18f6
|
2020-11-17T18:42:35
|
|
Remove Nexus 6P expectations
Bot decommissioned in crrev.com/c/2541579
Bug: chromium:1148989, angleproject:5280, angleproject:3726
Bug: angleproject:2641, angleproject:3264, angleproject:2114
Bug: angleproject:3464, angleproject:4991, angleproject:1415
Bug: angleproject:2407, angleproject:1427, angleproject:4215
Bug: angleproject:1429, angleproject:5069, chromium:998503
Change-Id: I1b268fdbcf6465aef447e90e470c1a011c7b3747
Reviewed-on: https://chromium-review.googlesource.com/c/angle/angle/+/2545892
Reviewed-by: Jamie Madill <jmadill@chromium.org>
Commit-Queue: Yuly Novikov <ynovikov@chromium.org>
|
|
3435503b
|
2020-11-05T17:53:02
|
|
Add test running flag: --delay-test-start
Add the following flag to the test runner to aid debugging:
--delay-test-start=<number of seconds>
This delays the start of each test by <number of seconds>. This is
useful when using debuggers, like RenderDoc, that need some extra time
to attach to the process before capturing data.
Bug: angleproject:5312
Change-Id: Ie1aab155e780dfae7311e046af0a7702904cd9eb
Reviewed-on: https://chromium-review.googlesource.com/c/angle/angle/+/2522504
Reviewed-by: Jamie Madill <jmadill@chromium.org>
Reviewed-by: Cody Northrop <cnorthrop@google.com>
Commit-Queue: Tim Van Patten <timvp@google.com>
|
|
e6a302a0
|
2020-11-07T10:49:15
|
|
Vulkan: Move vk::CommandQueue to RendererVk.
This consolidates most of the command processor vs queue logic in one
place. It also has a number of incidental changes related to fences:
- syncs now do not store a shared fence. instead they call command
apis to wait for a particular serial with a timeout. this is not
yet fully implemented in CommandProcessor.
- surface swap history stores a serial instead of a fence. because
the RendererVk class stores the command batches, we no longer have
to do messy things with ContextVk.
- it is no longer possible to ask for a wait on a serial that isn't
in the command queue.
Also adds mutex synchronization around the RendererVk methods.
Bug: angleproject:5217
Bug: b/172704839
Change-Id: I5faf0e24bb6ede79a927ab149b80bfa8baca4620
Reviewed-on: https://chromium-review.googlesource.com/c/angle/angle/+/2524548
Commit-Queue: Jamie Madill <jmadill@chromium.org>
Reviewed-by: Shahbaz Youssefi <syoussefi@chromium.org>
Reviewed-by: Courtney Goeltzenleuchter <courtneygo@google.com>
Reviewed-by: Tim Van Patten <timvp@google.com>
|
|
38016632
|
2020-11-11T08:04:45
|
|
Vulkan: Enable async feature in end2end_tests.
This adds a new async-command-queue-enabled config that we run against
most of the GLES tests in angle_end2end_tests. The tests now test
both with and without the threaded command queue.
Bug: b/172704839
Change-Id: Ife75f8328f23ac150cddf8ad8a6c4b8fc2d83986
Reviewed-on: https://chromium-review.googlesource.com/c/angle/angle/+/2532655
Reviewed-by: Tim Van Patten <timvp@google.com>
Reviewed-by: Courtney Goeltzenleuchter <courtneygo@google.com>
Commit-Queue: Jamie Madill <jmadill@chromium.org>
|
|
56ea854e
|
2020-10-13T15:57:07
|
|
Metal: Allow unswizzled BC1 RGB
Refine DXT1CompressedTextureTest.DXT1Alpha to pass on more
configurations.
Fix the test's payload so that all 16 pixels use code 3.
Refine texture swizzling detection.
Bug: angleproject:2634
Bug: angleproject:5049
Change-Id: If9e1ab63220170a54954234ea205e19583b0df0a
Reviewed-on: https://chromium-review.googlesource.com/c/angle/angle/+/2467896
Reviewed-by: Geoff Lang <geofflang@chromium.org>
Reviewed-by: Le Hoang Quyen <le.hoang.q@gmail.com>
Commit-Queue: Alexey Knyazev <lexa.knyazev@gmail.com>
|
|
8a275449
|
2020-10-25T03:22:10
|
|
Metal: Add ES3_METAL to ANGLE_ALL_TEST_PLATFORMS_ES3
Bug: angleproject:2634
Change-Id: Iacc3aaf17565c7b16879897db4b9dac16826d829
Reviewed-on: https://chromium-review.googlesource.com/c/angle/angle/+/2494526
Commit-Queue: Le Hoang Quyen <le.hoang.q@gmail.com>
Reviewed-by: Shahbaz Youssefi <syoussefi@chromium.org>
Reviewed-by: Jamie Madill <jmadill@chromium.org>
|
|
cb6176f3
|
2020-09-29T01:08:00
|
|
Metal: Support tri-fan & line-loop with primitive restart
Triangle fan:
- If primitive restart is NOT enabled and there is no active render
pass, use Compute Shader to generate indices.
- If primitive restart is enabled, use CPU to generate indices.
Line loop:
- If draw non-instanced without primitive restart, generate and
draw only one additional last segment (fastest).
- If draw instanced, primitive restart is NOT enabled, and there is no
active render pass, use Compute Shader to generate indices (OK).
- Otherwise, use CPU to generate indices (slowest).
Also Disable OcclusionQueriesTest.ClearNotCounted failure on NVIDIA.
Bug: angleproject:2634
Bug: angleproject:5307
Change-Id: Ia5529825807a964f5fcb2a4af8844778896cd42a
Reviewed-on: https://chromium-review.googlesource.com/c/angle/angle/+/2435859
Commit-Queue: Le Hoang Quyen <le.hoang.q@gmail.com>
Reviewed-by: Jamie Madill <jmadill@chromium.org>
Reviewed-by: Shahbaz Youssefi <syoussefi@chromium.org>
|
|
3e5b6f81
|
2020-10-31T12:33:28
|
|
Enable writing histogram-set-json-format.
This uses the protobuf histogram functionality to build up a histogram
set. The test suites then output the histograms to JSON. This is only
implemented for angle_perftests.
Bug: angleproject:5161
Change-Id: Ia5a7868e8d8dcf4f13d83115ae622828c63ef0d9
Reviewed-on: https://chromium-review.googlesource.com/c/angle/angle/+/2482295
Reviewed-by: Brian Sheedy <bsheedy@chromium.org>
Reviewed-by: Yuly Novikov <ynovikov@chromium.org>
Commit-Queue: Jamie Madill <jmadill@chromium.org>
|
|
39adaeb0
|
2020-11-03T13:15:41
|
|
Don't print reuse warning when forcing new displays.
Bug: angleproject:5274
Change-Id: I2c21a0f097398c508cc116217e3cb97d78a795b1
Reviewed-on: https://chromium-review.googlesource.com/c/angle/angle/+/2518241
Reviewed-by: Jamie Madill <jmadill@chromium.org>
Commit-Queue: Jamie Madill <jmadill@chromium.org>
|
|
61180d01
|
2020-10-12T16:40:13
|
|
Reland "Add support for Linux vulkan backend with VK_KHR_display"
This is a reland of a7bb6a9b15ddeb8497523f8871deb25de2676d9f
Original change's description:
> Add support for Linux vulkan backend with VK_KHR_display
>
> Implement Linux simple display mode with vulkan backend
> through VK_KHR_display.
>
> Added value 'EGL_PLATFORM_VULKAN_DISPLAY_MODE_SIMPLE_ANGLE' for
> attribute EGL_PLATFORM_ANGLE_NATIVE_PLATFORM_TYPE_ANGLE to identify
> the new simple display mode. Also reserved
> EGL_PLATFORM_VULKAN_DISPLAY_MODE_HEADLESS_ANGLE for headless mode.
>
> How to enable:
> Add
>
> ```
> use_x11=false
> angle_vulkan_display_mode="simple" # default value
> ```
>
> into args.gn, then compile with linux vulkan args.
>
> Bug: angleproject:5214
> Change-Id: I1247585b9de8b55df106aba99322281f1c183203
> Reviewed-on: https://chromium-review.googlesource.com/c/angle/angle/+/2494320
> Commit-Queue: Jamie Madill <jmadill@chromium.org>
> Reviewed-by: Jamie Madill <jmadill@chromium.org>
> Reviewed-by: Shahbaz Youssefi <syoussefi@chromium.org>
Bug: angleproject:5214
Change-Id: I3921f6cb292c86658f39e739a878baad1ef64dba
Reviewed-on: https://chromium-review.googlesource.com/c/angle/angle/+/2515327
Commit-Queue: Xiaoxuan Liu <xiaoxuan.liu@arm.com>
Commit-Queue: Jamie Madill <jmadill@chromium.org>
Reviewed-by: Jamie Madill <jmadill@chromium.org>
|
|
c06a424f
|
2020-11-02T21:13:39
|
|
Test Runner: Robustly handle unexpected crashes.
This adds the ability for the test runner to parse unexpected crashes
from the stdout. It also processes the stdout to determine which tests
failed. Tests that run after the crash are re-tried in a follow-up
child process.
Will allow for the test runner to handle very crashy test suites and
also processes crashes from win-asan and other configs where it is
harder to intercept crashes.
Bug: angleproject:5251
Change-Id: Iee03130622571580cb7910f4fb097fe3659d75ec
Reviewed-on: https://chromium-review.googlesource.com/c/angle/angle/+/2513288
Commit-Queue: Jamie Madill <jmadill@chromium.org>
Reviewed-by: Yuly Novikov <ynovikov@chromium.org>
Reviewed-by: Tim Van Patten <timvp@google.com>
|
|
59fbb989
|
2020-11-02T13:27:52
|
|
Test Runner: Add ability to retry flaky tests.
Bug: angleproject:5273
Change-Id: Ie89559bb0897a04213981aa8fe4e2f2bfe78959a
Reviewed-on: https://chromium-review.googlesource.com/c/angle/angle/+/2513287
Commit-Queue: Jamie Madill <jmadill@chromium.org>
Reviewed-by: Yuly Novikov <ynovikov@chromium.org>
Reviewed-by: Tim Van Patten <timvp@google.com>
|
|
807e6b33
|
2020-11-02T17:15:03
|
|
Revert "Add support for Linux vulkan backend with VK_KHR_display"
This reverts commit a7bb6a9b15ddeb8497523f8871deb25de2676d9f.
Reason for revert: Failing on Ozone builder, see bug.
Bug: angleproject:5289
Original change's description:
> Add support for Linux vulkan backend with VK_KHR_display
>
> Implement Linux simple display mode with vulkan backend
> through VK_KHR_display.
>
> Added value 'EGL_PLATFORM_VULKAN_DISPLAY_MODE_SIMPLE_ANGLE' for
> attribute EGL_PLATFORM_ANGLE_NATIVE_PLATFORM_TYPE_ANGLE to identify
> the new simple display mode. Also reserved
> EGL_PLATFORM_VULKAN_DISPLAY_MODE_HEADLESS_ANGLE for headless mode.
>
> How to enable:
> Add
>
> ```
> use_x11=false
> angle_vulkan_display_mode="simple" # default value
> ```
>
> into args.gn, then compile with linux vulkan args.
>
> Bug: angleproject:5214
> Change-Id: I1247585b9de8b55df106aba99322281f1c183203
> Reviewed-on: https://chromium-review.googlesource.com/c/angle/angle/+/2494320
> Commit-Queue: Jamie Madill <jmadill@chromium.org>
> Reviewed-by: Jamie Madill <jmadill@chromium.org>
> Reviewed-by: Shahbaz Youssefi <syoussefi@chromium.org>
TBR=syoussefi@chromium.org,sunny.sun@arm.com,jmadill@chromium.org,xiaoxuan.liu@arm.com
Change-Id: I3e2a2a044c220ed8d25be0d82184e5fba7b9c06a
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: angleproject:5214
Reviewed-on: https://chromium-review.googlesource.com/c/angle/angle/+/2514637
Reviewed-by: Jamie Madill <jmadill@chromium.org>
Commit-Queue: Jamie Madill <jmadill@chromium.org>
|
|
53aef103
|
2020-11-01T08:52:58
|
|
Tests: Print warning when we hit display reuse limit.
This helps devs reduce test cases that are hit from test ordering.
Bug: angleproject:5274
Change-Id: Ia4d2b5f3adffc73a2d4582e3a738fc194729a6ee
Reviewed-on: https://chromium-review.googlesource.com/c/angle/angle/+/2513286
Reviewed-by: Shahbaz Youssefi <syoussefi@chromium.org>
Commit-Queue: Jamie Madill <jmadill@chromium.org>
|
|
a7bb6a9b
|
2020-10-12T16:40:13
|
|
Add support for Linux vulkan backend with VK_KHR_display
Implement Linux simple display mode with vulkan backend
through VK_KHR_display.
Added value 'EGL_PLATFORM_VULKAN_DISPLAY_MODE_SIMPLE_ANGLE' for
attribute EGL_PLATFORM_ANGLE_NATIVE_PLATFORM_TYPE_ANGLE to identify
the new simple display mode. Also reserved
EGL_PLATFORM_VULKAN_DISPLAY_MODE_HEADLESS_ANGLE for headless mode.
How to enable:
Add
```
use_x11=false
angle_vulkan_display_mode="simple" # default value
```
into args.gn, then compile with linux vulkan args.
Bug: angleproject:5214
Change-Id: I1247585b9de8b55df106aba99322281f1c183203
Reviewed-on: https://chromium-review.googlesource.com/c/angle/angle/+/2494320
Commit-Queue: Jamie Madill <jmadill@chromium.org>
Reviewed-by: Jamie Madill <jmadill@chromium.org>
Reviewed-by: Shahbaz Youssefi <syoussefi@chromium.org>
|
|
8a50b42b
|
2020-10-24T19:29:12
|
|
Metal: Convert index & vertex format on GPU when possible.
- When converting vertex buffer:
- if there is no render pass active, use compute shader to convert.
- if there is a render pass active and device supports explicit memory
barrier then convert the buffer in vertex shader with direct buffer
write and insert a memory barrier.
- if there is a render pass active and device doesn't support explicit
memory barrier then convert the buffer on CPU.
Bug: angleproject:2634
Change-Id: I5346e3a2adb855f40e46a3912d9db404a4482e0f
Reviewed-on: https://chromium-review.googlesource.com/c/angle/angle/+/2434025
Commit-Queue: Le Hoang Quyen <le.hoang.q@gmail.com>
Reviewed-by: Jamie Madill <jmadill@chromium.org>
Reviewed-by: Jonah Ryan-Davis <jonahr@google.com>
|
|
83539557
|
2020-09-27T16:27:16
|
|
Metal: Implement texture swizzle
Only enabled on macOS 10.15 and iOS 13.0 for now.
Bug: angleproject:2634
Change-Id: Ic44a245198e32f076e429312cae844c510e864d1
Reviewed-on: https://chromium-review.googlesource.com/c/angle/angle/+/2433333
Reviewed-by: Jamie Madill <jmadill@chromium.org>
Reviewed-by: Shahbaz Youssefi <syoussefi@chromium.org>
Commit-Queue: Le Hoang Quyen <le.hoang.q@gmail.com>
|
|
09932e04
|
2020-10-29T00:31:49
|
|
Vulkan: Support emulated pre-rotation in dEQP testing
Similarly to end2end tests, the window dimensions are swapped with
emulated prerotation at 90 and 270 degrees, while maintaining to the
application that dimensions are as requested.
The following new command line argument can be used to select an
emulated prerotation:
--emulated-pre-rotation=90
--emulated-pre-rotation=180
--emulated-pre-rotation=270
For example:
$ ./angle_deqp_gles2_tests --use-angle=vulkan \
--deqp-case=*draw* \
--emulated-pre-rotation=270
Additionally, the deqp test expectations can be marked with the
following new tags to add suppressions for failing tests under
prerotation:
PREROTATION
PREROTATION90
PREROTATION180
PREROTATION270
Bug: angleproject:4901
Change-Id: I7a68c1a1e7da4366cde981469c589d8d900c40c5
Reviewed-on: https://chromium-review.googlesource.com/c/angle/angle/+/2506810
Commit-Queue: Shahbaz Youssefi <syoussefi@chromium.org>
Reviewed-by: Yuly Novikov <ynovikov@chromium.org>
Reviewed-by: Jamie Madill <jmadill@chromium.org>
|
|
1070802c
|
2020-10-29T17:02:45
|
|
Skip Instanced MultiDrawTest.MultiDrawArrays on Mac Mini 8.1
Bug: angleproject:5265
Change-Id: I1d3f1802398472c0da2d00526bd7eb52f6596bea
Reviewed-on: https://chromium-review.googlesource.com/c/angle/angle/+/2508532
Reviewed-by: Jamie Madill <jmadill@chromium.org>
Commit-Queue: Yuly Novikov <ynovikov@chromium.org>
|
|
47e66f22
|
2020-10-28T14:24:37
|
|
Revert "Re-enable crash testing in angle_unittests."
This reverts commit 21add1240950c2e2a6ec997f9a128005d84266b6.
Reason for revert: Fails on Windows 7 x64 Chromium config.
https://ci.chromium.org/p/chromium/builders/ci/Win%207%20Tests%20x64%20%281%29/73194
Original change's description:
> Re-enable crash testing in angle_unittests.
>
> This is an experimental test to see if this works now.
> Disabled on Win/ASAN because of conflicts with the
> crash callback.
>
> Bug: angleproject:5239
> Change-Id: I280b18ab8846de79b561f26716df9ba374cfd9a5
> Reviewed-on: https://chromium-review.googlesource.com/c/angle/angle/+/2496040
> Reviewed-by: Jamie Madill <jmadill@chromium.org>
> Commit-Queue: Jamie Madill <jmadill@chromium.org>
TBR=ynovikov@chromium.org,jmadill@chromium.org
# Not skipping CQ checks because original CL landed > 1 day ago.
Bug: angleproject:5239
Change-Id: I83c150c2c2090b7d1aeb78e53e96115a167a7491
Reviewed-on: https://chromium-review.googlesource.com/c/angle/angle/+/2505479
Commit-Queue: Jamie Madill <jmadill@chromium.org>
Reviewed-by: Jamie Madill <jmadill@chromium.org>
|
|
b0db7cca
|
2020-10-23T17:37:41
|
|
Vulkan: Initial emulated prerotation support
This is currently only supported for end2end tests (those which use
ANGLETestBase, excluding those that use WithNoFixture) and Vulkan. Use
WithEmulatedPreoration(*_VULKAN(), degree) where degree is either 90,
180 or 270.
With emulated prerotation, the window dimensions are physically swapped
if 90 and 270 degrees, while the width and height is still reported as
requested by the test. In the Vulkan backend, the width and height are
swapped after getting queried from the surface, and prerotation is
assumed.
Bug: angleproject:4901
Change-Id: I294436be4c7015d2a63463c4d61de7b67f38c95d
Reviewed-on: https://chromium-review.googlesource.com/c/angle/angle/+/2495544
Commit-Queue: Shahbaz Youssefi <syoussefi@chromium.org>
Reviewed-by: Ian Elliott <ianelliott@google.com>
Reviewed-by: Jamie Madill <jmadill@chromium.org>
|
|
5c4c37dc
|
2020-10-25T15:55:45
|
|
Capture/Replay: Test improvements.
Streamlines some arguments.
Use a common subdirectory in out/.
Show process name when logging.
Clean up environment variable handling.
Bug: angleproject:5247
Change-Id: I85eb5b8194a64f90691c4d03db3ee65c5e9b2313
Reviewed-on: https://chromium-review.googlesource.com/c/angle/angle/+/2497560
Reviewed-by: Cody Northrop <cnorthrop@google.com>
Reviewed-by: Courtney Goeltzenleuchter <courtneygo@google.com>
Commit-Queue: Jamie Madill <jmadill@chromium.org>
|
|
21add124
|
2020-10-25T15:55:45
|
|
Re-enable crash testing in angle_unittests.
This is an experimental test to see if this works now.
Disabled on Win/ASAN because of conflicts with the
crash callback.
Bug: angleproject:5239
Change-Id: I280b18ab8846de79b561f26716df9ba374cfd9a5
Reviewed-on: https://chromium-review.googlesource.com/c/angle/angle/+/2496040
Reviewed-by: Jamie Madill <jmadill@chromium.org>
Commit-Queue: Jamie Madill <jmadill@chromium.org>
|
|
4968245c
|
2020-10-25T12:58:15
|
|
Adjust TestSuite test timeout values.
This should prevent flakiness in this test.
Bug: angleproject:5245
Change-Id: I841de2cee093ea04b35763314f0a4f5497bcf778
Reviewed-on: https://chromium-review.googlesource.com/c/angle/angle/+/2497223
Reviewed-by: Jamie Madill <jmadill@chromium.org>
Commit-Queue: Jamie Madill <jmadill@chromium.org>
|
|
1c881dad
|
2020-09-27T01:35:31
|
|
Metal: Implement glRenderbufferStorageMultisample(ANGLE)
Bug: angleproject:2634
Change-Id: Ia4dd477cfbad298994036705b43f3a5877e3c9cc
Reviewed-on: https://chromium-review.googlesource.com/c/angle/angle/+/2433330
Commit-Queue: Le Hoang Quyen <le.hoang.q@gmail.com>
Reviewed-by: Jonah Ryan-Davis <jonahr@google.com>
Reviewed-by: Jamie Madill <jmadill@chromium.org>
|
|
2f7fc0f3
|
2020-10-23T09:58:56
|
|
Tests: Remove standalone duplication.
Also cleans up some compiler warnings that crept in because of how
we structured the test sources in GN. We also no longer need special
handling for the test "main" files.
Must land after http://crrev.com/c/2495003 rolls into ANGLE.
Bug: angleproject:5124
Change-Id: I43ff91b5c8f00214886cd8ac2403702e5026a840
Reviewed-on: https://chromium-review.googlesource.com/c/angle/angle/+/2495281
Reviewed-by: Jamie Madill <jmadill@chromium.org>
Reviewed-by: Courtney Goeltzenleuchter <courtneygo@google.com>
Commit-Queue: Jamie Madill <jmadill@chromium.org>
|
|
31868665
|
2020-10-23T10:54:02
|
|
Test Runner: Only run watchdog in child processes.
For single test execution we don't need to be running the watchdog
thread. This only serves to cause timeouts in slow running tests.
Adds a new method to keep the --batch-id argument in the list of
parameters so other functions can process them.
Bug: angleproject:5124
Bug: angleproject:5218
Change-Id: I958230149b7d79830802cd55f67f0190de607200
Reviewed-on: https://chromium-review.googlesource.com/c/angle/angle/+/2495282
Reviewed-by: Tim Van Patten <timvp@google.com>
Reviewed-by: Shahbaz Youssefi <syoussefi@chromium.org>
Commit-Queue: Jamie Madill <jmadill@chromium.org>
|
|
cd88bccf
|
2020-10-21T08:44:32
|
|
Test Runner: Command line sharding args override env.
Previously ANGLE would error out when both the enviornment and
the command line args are specified at the same time. Because
the perf bots use both at once we need to handle the conflict
in the same way as the prior test runner does. In this case
the command line takes precedence over the environment.
Bug: angleproject:5124
Change-Id: I1ba765b4e75759922bf9fe2db9f153cfc5995f85
Reviewed-on: https://chromium-review.googlesource.com/c/angle/angle/+/2489722
Reviewed-by: Yuly Novikov <ynovikov@chromium.org>
Reviewed-by: Courtney Goeltzenleuchter <courtneygo@google.com>
Commit-Queue: Jamie Madill <jmadill@chromium.org>
|
|
26cd1cc6
|
2020-10-18T11:44:27
|
|
Perf Tests: Add stdout printing arg to bot mode.
This can be useful for debugging and also for perf tests. The perf
tests output gets scraped from stdout.
Bug: angleproject:5124
Change-Id: Id5005df3f2b66be9497a9ba422abd47b95a1a330
Reviewed-on: https://chromium-review.googlesource.com/c/angle/angle/+/2486097
Reviewed-by: Tim Van Patten <timvp@google.com>
Reviewed-by: Courtney Goeltzenleuchter <courtneygo@google.com>
Commit-Queue: Jamie Madill <jmadill@chromium.org>
|
|
556d812a
|
2020-10-18T11:48:45
|
|
Test Runner: Disable watchdog when debugger attached.
Bug: angleproject:3162
Change-Id: I3685a4fe068b6e82b8bb04448c212788f563ab8b
Reviewed-on: https://chromium-review.googlesource.com/c/angle/angle/+/2483463
Commit-Queue: Jamie Madill <jmadill@chromium.org>
Reviewed-by: Yuly Novikov <ynovikov@chromium.org>
|
|
b4fb7cc9
|
2020-10-15T08:58:06
|
|
Test Runner: Print reproduction steps on a batch failure.
This prints out a large gtest_filter of the tests in a batch. Makes
reproducing a particular failure much easier.
In the future we could potentially look at using an encoding to
reproduce a specific batch: e.g. a flag that acceps a batch / shard
number and runs those tests based on using the same internal counts.
Bug: angleproject:5172
Change-Id: Iefad8f5ca23761417ad1ceb11fd664c9cf23c8be
Reviewed-on: https://chromium-review.googlesource.com/c/angle/angle/+/2475455
Commit-Queue: Jamie Madill <jmadill@chromium.org>
Reviewed-by: Courtney Goeltzenleuchter <courtneygo@google.com>
Reviewed-by: Yuly Novikov <ynovikov@chromium.org>
|
|
9580f3b4
|
2020-10-10T10:06:04
|
|
Test Runner: Accept GTEST shard environment vars.
This makes interoperation with Chromium tests easier. For instance when
triggering tests with scripts when using sharding. And also using the
run/ wrapper scripts instead of run_gtest_angle_test.
Bug: angleproject:5158
Change-Id: Ia5b1f94c02a081caf576615175791fff4e0d3fb3
Reviewed-on: https://chromium-review.googlesource.com/c/angle/angle/+/2464030
Reviewed-by: Courtney Goeltzenleuchter <courtneygo@google.com>
Reviewed-by: Yuly Novikov <ynovikov@chromium.org>
Commit-Queue: Jamie Madill <jmadill@chromium.org>
|
|
ad80b184
|
2020-10-13T17:15:59
|
|
Test Runner: List tests explicitly without GTest.
This dramatically speeds up Android shards that use batches of
hudreds of tests. Because ANGLE already has the test list, it no
longer needs to call GTest with an enourmous gtest_filter.
Bug: angleproject:5164
Change-Id: I28fee2f36c50006f2a35a4dcd90f44f8ebe4f78c
Reviewed-on: https://chromium-review.googlesource.com/c/angle/angle/+/2468464
Commit-Queue: Jamie Madill <jmadill@chromium.org>
Reviewed-by: Yuly Novikov <ynovikov@chromium.org>
|
|
d5296d99
|
2020-10-13T12:45:25
|
|
Update IsARM64
Updates IsARM64 to return true if __aarch64__ is defined, as the current
check only using _M_ARM64 only evaluates to true on Windows platforms.
Bug: chromium:1132295
Change-Id: I4853012e077217162ee3439c17fe35dcc6157e71
Reviewed-on: https://chromium-review.googlesource.com/c/angle/angle/+/2468787
Commit-Queue: Brian Sheedy <bsheedy@chromium.org>
Commit-Queue: Jamie Madill <jmadill@chromium.org>
Reviewed-by: Jamie Madill <jmadill@chromium.org>
|
|
336202d7
|
2020-10-09T16:43:32
|
|
Test Runner: Pass batch ID to child processes.
This will let both the ANGLETest and dEQP test runners handle child
processes correctly. The existing ANGLETest runner will reuse displays,
and the dEQP test runner will write to a batch-unique filename.
This solves the problem of the multi-process --bot-mode writing to the
same file from multiple children simultaneously.
Long-term it will be good to include the dEQP QPA files into the test
artifacts.
Also disables flushing after every log write when running as a child
process. This hugely improves performance on machines with no SSD.
Test: https://chromium-swarm.appspot.com/task?id=4f2b87c4f8234910
Bug: angleproject:5157
Change-Id: I226d24adf55e0f8b98e5a8e7947862e6906b4c40
Reviewed-on: https://chromium-review.googlesource.com/c/angle/angle/+/2464424
Reviewed-by: Courtney Goeltzenleuchter <courtneygo@google.com>
Reviewed-by: Ian Elliott <ianelliott@google.com>
Commit-Queue: Jamie Madill <jmadill@chromium.org>
|
|
e0780931
|
2020-10-08T17:57:47
|
|
Suppress gl_test failures on Mac ARM64 (Apple DTK)
BuiltinVariableFragDepthClampingFloatRBOTest.Below1/ES3_OpenGL
CopyTexImageTest.DeleteAfterCopyingToTextures/ES2_OpenGL
GLSLTest.MaxVaryingVec2Arrays/ES2_Metal
GLSLTest.MaxVaryingVec3ArrayAndOneFloatArray/ES2_Metal
GLSLTest.MoreNestedCompoundStructsWithSamplersAsFunctionArg/ES2_OpenGL
GLSLTest.NestedCompoundStructsWithSamplersAsFunctionArg/ES2_OpenGL
GLSLTest.NestedStructsWithSamplersAsFunctionArg/ES2_OpenGL
GLSLTest.NestedStructsWithSamplersAsFunctionArg/ES3_OpenGL
MipmapTestES3.BaseLevelTextureBug/ES3_OpenGL
MipmapTestES3.GenerateMipmapBaseLevel/ES3_OpenGL
MipmapTestES3.GenerateMipmapCubeBaseLevel/ES3_OpenGL
MipmapTestES3.GenerateMipmapMaxLevel/ES3_OpenGL
MipmapTestES3.GenerateMipmapPreservesOutOfRangeMips/ES3_OpenGL
OcclusionQueriesTest.MultiQueries/ES2_Metal
Texture2DBaseMaxTestES3.GenerateMipmapAfterRedefineAndRebase/ES3_OpenGL
Texture2DFloatTestES2.TextureFloatLinearLegacyTest/ES2_Metal
Texture2DFloatTestES2.TextureFloatLinearLegacyTest/ES2_OpenGL
Texture2DFloatTestES2.TextureFloatLinearTest/ES2_Metal
Texture2DFloatTestES2.TextureFloatLinearTest/ES2_OpenGL
Texture2DFloatTestES3.TextureFloatLinearLegacyTest/ES3_OpenGL
Texture2DFloatTestES3.TextureFloatLinearTest/ES3_OpenGL
TimerQueriesTest.TimeElapsed/ES3_OpenGL
TimerQueriesTest.TimeElapsedMulticontextTest/ES3_OpenGL
WebGLCompatibilityTest.TextureCopyingFeedbackLoops/ES2_OpenGL
WebGLCompatibilityTest.TextureCopyingFeedbackLoops/ES3_OpenGL
Bug: chromium:1132295
Change-Id: If64dc67275063c8046dbc941d92de273fbc226e5
Reviewed-on: https://chromium-review.googlesource.com/c/angle/angle/+/2461674
Commit-Queue: Kai Ninomiya <kainino@chromium.org>
Commit-Queue: Jamie Madill <jmadill@chromium.org>
Reviewed-by: Jamie Madill <jmadill@chromium.org>
|
|
23624c53
|
2020-10-05T21:07:02
|
|
Test Runner: More docs.
Bug: angleproject:3162
Change-Id: I5b282d7815973cef9f7e029bc3c65cf42729e009
Reviewed-on: https://chromium-review.googlesource.com/c/angle/angle/+/2451596
Commit-Queue: Jamie Madill <jmadill@chromium.org>
Reviewed-by: Yuly Novikov <ynovikov@chromium.org>
|
|
d3aa1e9c
|
2020-10-03T01:31:33
|
|
Test Runner: Pass dEQP args to child processes.
This fixes the sharding to use the specified back-end. With
the bug ANGLE would start the platform default back-end instead.
Bug: angleproject:3162
Change-Id: Ib2453dd3c58ea40fb36619301865ae0818038d15
Reviewed-on: https://chromium-review.googlesource.com/c/angle/angle/+/2447043
Commit-Queue: Jamie Madill <jmadill@chromium.org>
Reviewed-by: Courtney Goeltzenleuchter <courtneygo@google.com>
Reviewed-by: Yuly Novikov <ynovikov@chromium.org>
|
|
f0d9471c
|
2020-10-02T23:51:57
|
|
Test Runner: More misc improvements.
- reduces default batch size from 1000 -> 256
- reduces default max processes to a max of 16
- stripes tests when in bot mode
- prints less spam when waiting for child processes
The striping and smaller batch size can help with slow tests.
The max process limit seemed to prevent errors on Linux.
Bug: angleproject:3162
Change-Id: Ibed89ca35db54c62ec8ed63b32bc5aed916faec9
Reviewed-on: https://chromium-review.googlesource.com/c/angle/angle/+/2447037
Commit-Queue: Jamie Madill <jmadill@chromium.org>
Reviewed-by: Courtney Goeltzenleuchter <courtneygo@google.com>
Reviewed-by: Yuly Novikov <ynovikov@chromium.org>
|
|
23825b12
|
2020-10-02T16:32:32
|
|
Test Runner: Set interrupted to 'false' normally.
The bug here was to output 'interrupted: true' when running
in --bot-mode. Instead in normal execution we will output
that we were not interrupted.
Bug: angleproject:3162
Bug: chromium:1134619
Change-Id: I3842e90466473ff05b0b90bc4660f88606a3c9f6
Reviewed-on: https://chromium-review.googlesource.com/c/angle/angle/+/2446851
Reviewed-by: Yuly Novikov <ynovikov@chromium.org>
Commit-Queue: Jamie Madill <jmadill@chromium.org>
|
|
e815afbf
|
2020-09-07T22:09:22
|
|
First pass at increasing inclusivity
Link to the inclusivity rules
https://source.android.com/setup/contribute/respectful-code
Bug: b/162834212
Bug: chromium:1097198
Change-Id: Ied5a9e3879d72bff3f77ea6fcda9b82f30c32c2f
Reviewed-on: https://chromium-review.googlesource.com/c/angle/angle/+/2396737
Commit-Queue: Jamie Madill <jmadill@chromium.org>
Reviewed-by: Geoff Lang <geofflang@chromium.org>
Reviewed-by: Jamie Madill <jmadill@chromium.org>
Reviewed-by: Trevor Black <vantablack@google.com>
|
|
513095e9
|
2020-10-02T11:47:19
|
|
Disable AMD OpenGL testing on Windows ANGLE tests.
Our current CI testing for AMD is quite out-of-date and unsupported.
If necessary we could skip based on a GPU device ID.
Bug: angleproject:5123
Change-Id: Idf919a330aa9903ad80aba38f745d4a35d1b501e
Reviewed-on: https://chromium-review.googlesource.com/c/angle/angle/+/2446092
Reviewed-by: Yuly Novikov <ynovikov@chromium.org>
Reviewed-by: Geoff Lang <geofflang@chromium.org>
Commit-Queue: Jamie Madill <jmadill@chromium.org>
|
|
1fd3e5d8
|
2020-10-01T10:00:18
|
|
Test Runner: Fix race in watchdog timeouts.
This fixes a TSAN warning that popped up with the standalone test
runner. The watchdog timer actually was never started so timeouts
were not working as intended. It also switches the timeout mode
to call _Exit which skips all the atexit handlers and avoids some
races on teardown. This change also speeds up the TestSuiteTest.
Also a small fix to GetTempDir that was including an extra path
separator on Windows.
Bug: angleproject:3162
Bug: angleproject:5117
Change-Id: I0e7880a08b61bbb6e30c65665d5c0acec2d78db2
Reviewed-on: https://chromium-review.googlesource.com/c/angle/angle/+/2442381
Reviewed-by: Yuly Novikov <ynovikov@chromium.org>
Commit-Queue: Jamie Madill <jmadill@chromium.org>
|
|
6e36029d
|
2020-09-28T21:57:08
|
|
Disable Mock ICD perf tests on Android.
Bug: angleproject:5084
Change-Id: Iafff2adbd8bfc2844c43ca31329f3f8be1250631
Reviewed-on: https://chromium-review.googlesource.com/c/angle/angle/+/2438193
Reviewed-by: Courtney Goeltzenleuchter <courtneygo@google.com>
Reviewed-by: Cody Northrop <cnorthrop@google.com>
Commit-Queue: Jamie Madill <jmadill@chromium.org>
|
|
7bd8bd9f
|
2020-09-24T17:11:56
|
|
Skip PBO test on TSAN.
Texture2DTest.TexStorageWithPBO/ES2_OpenGL is flaky.
Bug: b/168744561
Bug: angleproject:5097
Change-Id: Ide9b5a7d22e86c6eccd83ebc3bce6797b90150a6
Reviewed-on: https://chromium-review.googlesource.com/c/angle/angle/+/2430163
Commit-Queue: Jamie Madill <jmadill@chromium.org>
Reviewed-by: Jamie Madill <jmadill@chromium.org>
Reviewed-by: Yuly Novikov <ynovikov@chromium.org>
|
|
867358b7
|
2020-09-21T23:40:57
|
|
Test Runner: Improve sharding validation.
The prior check was incorrectly flagging index=0/count=2 as
invalid. It also missed a few cases like a shard count of 0.
Bug: angleproject:3162
Change-Id: Ida4c0f454ece15e4304d024d205475acf0f135e6
Reviewed-on: https://chromium-review.googlesource.com/c/angle/angle/+/2423207
Reviewed-by: Jamie Madill <jmadill@chromium.org>
Reviewed-by: Yuly Novikov <ynovikov@chromium.org>
Commit-Queue: Jamie Madill <jmadill@chromium.org>
|
|
5d7de5fd
|
2020-09-20T13:09:07
|
|
Test Runner: Fix default config grouping.
Running "angle_unittests" with --bot-mode would produce noisy
test groupings for each permutation of parameterized tests. Fix
this by only splitting configs that begin with "ES". e.g. ES2_Vulkan,
ES3_OpenGL, etc.
Bug: angleproject:3162
Change-Id: I0b0ebe1c9cef9cbbce0489a2bc3f62761d43a1c7
Reviewed-on: https://chromium-review.googlesource.com/c/angle/angle/+/2419046
Commit-Queue: Jamie Madill <jmadill@chromium.org>
Reviewed-by: Jonah Ryan-Davis <jonahr@google.com>
Reviewed-by: Geoff Lang <geofflang@chromium.org>
|
|
763e8b81
|
2020-09-20T21:59:23
|
|
Test Runner: Add more timeout logging.
Will help diagnose a timeout failure on Windows Intel.
Also reduce the significant digits in time output.
Bug: angleproject:3162
Change-Id: I6d6a852f572875f613dec8e4ab6e798dfde0ca9b
Reviewed-on: https://chromium-review.googlesource.com/c/angle/angle/+/2420331
Commit-Queue: Jamie Madill <jmadill@chromium.org>
Reviewed-by: Jonah Ryan-Davis <jonahr@google.com>
|
|
dd0a9ec9
|
2020-09-20T12:50:21
|
|
Test Runner: Allow empty sharding parameters.
The prior check was incorrectly validating a shard index of zero
and a shard count of one as inconsistent.
Bug: angleproject:3162
Change-Id: I63184c16e82f08080b275672a43e6dacf291560d
Reviewed-on: https://chromium-review.googlesource.com/c/angle/angle/+/2419045
Reviewed-by: Jonah Ryan-Davis <jonahr@google.com>
Commit-Queue: Jonah Ryan-Davis <jonahr@google.com>
|
|
76e90947
|
2020-09-19T10:48:55
|
|
Test Runner: Really reuse displays with --bot-mode.
The prior design didn't pass the correct flag to the subprocess.
Instead add a new --reuse-displays flag that forces display reuse
on in ANGLE tests. Pass the new flag to the child processes when
running with --bot-mode.
Bug: angleproject:3162
Change-Id: I5f62125d83d339b5e8b2506b4ca4656976f7398e
Reviewed-on: https://chromium-review.googlesource.com/c/angle/angle/+/2419638
Reviewed-by: Jamie Madill <jmadill@chromium.org>
Commit-Queue: Jamie Madill <jmadill@chromium.org>
|
|
3f20c713
|
2020-09-19T11:29:56
|
|
Test Runner: Fix "--bot-mode" error level return value.
Previously the runner was returning "1" on success and "0" on failure.
Swap this so that it correctly returns "0" on success and "1" on fail.
This only affected "--bot-mode" which isn't yet enabled.
Bug: angleproject:3162
Change-Id: I1ee942223272d24eff137279d5a0638d3a65694e
Reviewed-on: https://chromium-review.googlesource.com/c/angle/angle/+/2419639
Reviewed-by: Jamie Madill <jmadill@chromium.org>
Commit-Queue: Jamie Madill <jmadill@chromium.org>
|
|
93f58c15
|
2020-09-19T09:58:23
|
|
Vulkan: Allow no validation layers in ExternalImageTest.
Similarly to common test init, these specific tests init the Vulkan
resources with validation layers when they might not be available.
Fix this by checking for the appropriate define.
Bug: b/168744561
Change-Id: I93dd3bac839297ced07cb2c4cbbcf64db2e65a1f
Reviewed-on: https://chromium-review.googlesource.com/c/angle/angle/+/2419041
Reviewed-by: Jamie Madill <jmadill@chromium.org>
Commit-Queue: Jamie Madill <jmadill@chromium.org>
|
|
d6806d73
|
2020-09-18T17:56:48
|
|
Test Runner: Fix sharding and --bot-mode.
We were using the incorrect test list to set up initial test
expectations. Fix this by using the already generated test set
in the test suite.
Test: angle_unittests with --bot-mode, sharding, and filter
Bug: angleproject:3162
Change-Id: Id108943494130410caab404faad25115792e794d
Reviewed-on: https://chromium-review.googlesource.com/c/angle/angle/+/2419596
Reviewed-by: Jamie Madill <jmadill@chromium.org>
Reviewed-by: Yuly Novikov <ynovikov@chromium.org>
Commit-Queue: Jamie Madill <jmadill@chromium.org>
|