kc3-lang/automake/lib/am/depend2.am
Branch :
Log
| Author | Commit | Date | CI | Message |
|---|---|---|---|---|
 |
8f06bfba | 2013-01-09 22:17:53 | depend2.am: fix comments on verbosity of compilation rules The situation and decisions described on those comments have become quite outdated since the introduction of the silent-rules support. Today, the general idea is to have nice, terse output if silent rules are enabled, and complete, faithful, very verbose output if they are not -- without trying to "massage" this verbose output in a more pleasant form if that would cause complication in the affected code. So it's better to just drop the obsolescent comments. Note that we don't start simplifying the existing rules according to this new philosophy; that will only be done when touching some existing code (for the 'depend2.am' code, that will probably happen on the master branch). Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com> | |
|
a52e9de0 | 2013-01-09 22:01:45 | depend2.am: improve comments a little * lib/am/depend2.am: The "fastdep" mode is supported not only for gcc 3.x, but for gcc 3.x or later, in particular, for all gcc in the 4.x series (at the time of writing, the latest release is 4.72). Adjust the comments to match, and re-wrap them while at it. Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com> | |
|
7df8b28c | 2012-12-31 18:18:37 | maint: update copyright year for 2013 (in branch maint) Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com> | |
|
de58d25e | 2012-02-23 15:15:26 | am: do not quote `like this', as per GCS recommendation This patch converts the automake-provided '*.am' fragments, and related files, to the use of new quoting format 'like this' or "like this" rather than `like this'. * lib/am/check.am: Update quoting format throughout, in comments and diagnostic. Some related rewordings, reformatting, and removal of redundant commands since we are at it. * lib/am/configure.am: Likewise. * lib/am/dejagnu.am: Likewise. * lib/am/depend2.am: Likewise. * lib/am/distdir.am: Likewise. * lib/am/inst-vars.am: Likewise. * lib/am/install.am: Likewise. * lib/am/lang-compile.am: Likewise. * lib/am/lisp.am: Likewise. * lib/am/ltlib.am: Likewise. * lib/am/mans.am: Likewise. * lib/am/progs.am: Likewise. * lib/am/remake-hdr.am: Likewise. * lib/am/subdirs.am: Likewise. * lib/am/tags.am: Likewise. * lib/am/texi-vers.am: Likewise. * lib/am/texibuild.am: Likewise. * lib/am/texinfos.am: Likewise. * lib/am/yacc.am: Likewise. | |
|
641a5a4b | 2012-02-16 10:46:23 | maint: run "make update-copyright" | |
 |
c150e6c8 | 2010-01-24 12:36:47 | Fix silent-rules output for disabled dependency tracking. * lib/am/depend2.am [!%FASTDEP%]: Rework silent-rules variable expansion code to also work in the case where %AMDEP% expands to FALSE at config.status time, using new substitution string %VERBOSE-NODEP%. * automake.in (verbose_nodep_flag): New function, appending `@am__nodep@' to the verbose-variable name. (handle_languages): If dependencies are not disabled, use it to set %VERBOSE-NODEP%. * m4/depend.m4: Substitute am__nodep as '_no', so the second verbose-variable will always expand to an empty string, if dependencies are enabled. * tests/silent5.test: Also test --disable-dependency-tracking; also test per-target flags for non-C language files. * tests/silent9.test: New test, like silent4.test but disable dependency tracking. * tests/Makefile.am: Adjust. * NEWS, THANKS: Update. Report by Dmitry V. Levin <ldv@altlinux.org>. Signed-off-by: Ralf Wildenhues <Ralf.Wildenhues@gmx.de> | |
|
fcf2f560 | 2009-05-17 15:32:40 | Revert Automake license to GPLv2+. Automake will move to GPLv3+ once the Exception statement has been rewritten to use the new GPLv3 exception language. This change does not impact the COPYING file that may be installed by `automake --add-missing'. * COPYING: Revert to GPLv2. All uses changed. * NEWS: Update. Signed-off-by: Ralf Wildenhues <Ralf.Wildenhues@gmx.de> | |
|
cae4a474 | 2009-03-11 19:50:16 | Drop extra line from compile rules when `silent' is not used. * lib/am/depend2.am [!%FASTDEP%]: Only use the `%VERBOSE% @AM_BACKSLASH@' extra line if ?VERBOSE?. Report by Ralf Corsepius. Signed-off-by: Ralf Wildenhues <Ralf.Wildenhues@gmx.de> | |
 |
e0bd4af1 | 2009-03-07 15:58:07 | Implement `silent' build rules. * automake.in (ccer): New field in the language structure. Initialize it for all registered languages. (verbose_var, verbose_flag, verbose_dispatch) (silent_flag, define_verbose_var, define_verbose_tagvar) (define_verbose_libtool): New functions. (handle_languages, handle_programs, handle_libraries) (handle_ltlibraries, handle_configure) (define_compiler_variable, define_linker_variable) (define_per_target_linker_variable): Use them where appropriate to define variables to implement the silent output machinery. * lib/Automake/Options.pm (_process_option_list): Accept `silent', turning off `portability-recursive'. * lib/am/depend2.am: Add %VERBOSE% and %SILENT% prefixes where appropriate. * lib/am/lex.am: Likewise. * lib/am/library.am: Likewise. * lib/am/ltlibrary.am: Likewise. * lib/am/program.am: Likewise. * lib/am/yacc.am: Likewise. * m4/init.m4 (AM_INIT_AUTOMAKE): Substitute, but do not define, AM_BACKSLASH. * tests/defs.in: Unset `V', to avoid influencing inner tests. Signed-off-by: Ralf Wildenhues <Ralf.Wildenhues@gmx.de> | |
|
63316731 | 2008-06-18 00:37:42 | Introduce macro $(am__mv) to facilitate 'libtool --dry-run'. * lib/am/depend.am (am__mv): New macro, set to 'mv -f'. * lib/am/depend2.am: Use throughout to move the temporary depfile *.Tpo to its final destination *.Po. Signed-off-by: Ralf Wildenhues <Ralf.Wildenhues@gmx.de> | |
|
e3acdefa | 2007-12-08 11:20:24 | Reword the copyright notices to match what's suggested in GPLv3. | |
|
b9ff055d | 2007-07-07 11:23:29 | * COPYING, lib/COPYING: Update to GPLv3. All uses changed. * NEWS: Update. | |
|
0bfc855e | 2006-10-16 05:24:17 | * lib/am/depend2.am (%SOURCEFLAG%): New substitution, goes right before the expanded source file name. * automake.in (%sourceflags): New global: per-extension flag to denote that the next compiler argument is the source file. (scan_autoconf_traces): Trace AC_FC_SRCEXT; initialize %sourceflags accordingly. (handle_single_transform): Store source file extension in... (%lang_specific_files): ...this and... (handle_languages): ...adjust here. Pass flag in SOURCEFLAG. * doc/automake.texi (Optional): Add AC_FC_SRCEXT. (Fortran 9x Support): Update. * tests/fort2.test: New test. * tests/Makefile.am: Adjust. * NEWS, THANKS: Update. Suggested by Steven G. Johnson. | |
 |
56e3e04b | 2006-10-15 17:02:34 | * lib/am/depend2.am: Typo. * lib/depcomp (scriptversion): Bump, to account for recent changes. | |
 |
d505ab90 | 2006-08-31 04:49:24 | * lib/am/depend2.am (?GENERIC?%EXT%.o, ?!GENERIC?%OBJ%): Likewise. Abbreviate output a bit by not bothering to quote the .Po file name (the quoting doesn't suffice in general anyway), and by not bothering to remove junk .Tpo files (as they'll be removed later). This also lets 'make' run faster by avoiding a subshell. | |
|
1b392928 | 2006-03-23 06:35:15 | * automake.in (libtool_new_api): Fix a typo in the comment. * lib/Automake/Makefile.am (Config.pm): Likewise. * lib/am/depend2.am: Likewise. * tests/xsource.test: With `set -e', `|| exit 1' is no longer needed. | |
|
1183efd3 | 2005-05-14 20:28:56 | * COPYING, ChangeLog, ChangeLog.00, ChangeLog.01, ChangeLog.02, ChangeLog.03, ChangeLog.96, ChangeLog.98, HACKING, Makefile.am, NEWS, README, TODO, aclocal.in, automake.in, bootstrap, configure, configure.ac, doc/Makefile.am, doc/fdl.texi, lib/COPYING, lib/Makefile.am, lib/acinstall, lib/compile, lib/config-ml.in, lib/config.guess, lib/config.sub, lib/depcomp, lib/elisp-comp, lib/gnupload, lib/mdate-sh, lib/missing, lib/py-compile, lib/symlink-tree, lib/texinfo.tex, lib/ylwrap, lib/Automake/ChannelDefs.pm, lib/Automake/Channels.pm, lib/Automake/Condition.pm, lib/Automake/Config.in, lib/Automake/Configure_ac.pm, lib/Automake/DisjConditions.pm, lib/Automake/FileUtils.pm, lib/Automake/General.pm, lib/Automake/Item.pm, lib/Automake/ItemDef.pm, lib/Automake/Location.pm, lib/Automake/Makefile.am, lib/Automake/Options.pm, lib/Automake/Rule.pm, lib/Automake/RuleDef.pm, lib/Automake/Struct.pm, lib/Automake/VarDef.pm, lib/Automake/Variable.pm, lib/Automake/Version.pm, lib/Automake/Wrap.pm, lib/Automake/XFile.pm, lib/Automake/tests/Condition.pl, lib/Automake/tests/DisjConditions.pl, lib/Automake/tests/Makefile.am, lib/Automake/tests/Version.pl, lib/Automake/tests/Wrap.pl, lib/am/Makefile.am, lib/am/ansi2knr.am, lib/am/check.am, lib/am/clean-hdr.am, lib/am/clean.am, lib/am/compile.am, lib/am/configure.am, lib/am/data.am, lib/am/dejagnu.am, lib/am/depend.am, lib/am/depend2.am, lib/am/distdir.am, lib/am/footer.am, lib/am/header-vars.am, lib/am/header.am, lib/am/inst-vars.am, lib/am/install.am, lib/am/java.am, lib/am/lang-compile.am, lib/am/lex.am, lib/am/library.am, lib/am/libs.am, lib/am/libtool.am, lib/am/lisp.am, lib/am/ltlib.am, lib/am/ltlibrary.am, lib/am/mans-vars.am, lib/am/mans.am, lib/am/multilib.am, lib/am/program.am, lib/am/progs.am, lib/am/python.am, lib/am/remake-hdr.am, lib/am/scripts.am, lib/am/subdirs.am, lib/am/tags.am, lib/am/texi-vers.am, lib/am/texibuild.am, lib/am/texinfos.am, lib/am/yacc.am, m4/Makefile.am, tests/aclibobj.test, tests/acloca10.test, tests/acloca11.test, tests/acloca12.test, tests/acloca13.test, tests/acloca14.test, tests/acloca15.test, tests/acloca16.test, tests/acloca17.test, tests/acloca18.test, tests/acloca19.test, tests/aclocal.test, tests/aclocal3.test, tests/aclocal4.test, tests/aclocal5.test, tests/aclocal6.test, tests/aclocal7.test, tests/aclocal8.test, tests/aclocal9.test, tests/acoutbs.test, tests/acoutbs2.test, tests/acoutnoq.test, tests/acoutpt.test, tests/acoutpt2.test, tests/acoutqnl.test, tests/acsilent.test, tests/acsubst.test, tests/acsubst2.test, tests/all.test, tests/alloca.test, tests/alloca2.test, tests/alpha.test, tests/alpha2.test, tests/amassign.test, tests/ammissing.test, tests/ansi.test, tests/ansi10.test, tests/ansi2.test, tests/ansi3.test, tests/ansi3b.test, tests/ansi4.test, tests/ansi5.test, tests/ansi6.test, tests/ansi7.test, tests/ansi8.test, tests/ansi9.test, tests/ar.test, tests/ar2.test, tests/asm.test, tests/autohdr.test, tests/autohdr2.test, tests/autohdr3.test, tests/autohdr4.test, tests/automake.test, tests/auxdir.test, tests/auxdir2.test, tests/auxdir3.test, tests/auxdir4.test, tests/backsl.test, tests/backsl2.test, tests/backsl3.test, tests/backsl4.test, tests/badline.test, tests/badopt.test, tests/badprog.test, tests/block.test, tests/bsource.test, tests/canon.test, tests/canon2.test, tests/canon3.test, tests/canon4.test, tests/canon5.test, tests/ccnoco.test, tests/check.test, tests/check2.test, tests/check3.test, tests/check4.test, tests/checkall.test, tests/clean.test, tests/clean2.test, tests/colneq.test, tests/colneq2.test, tests/colon.test, tests/colon2.test, tests/colon3.test, tests/colon4.test, tests/colon5.test, tests/colon6.test, tests/colon7.test, tests/comment.test, tests/comment2.test, tests/comment3.test, tests/comment4.test, tests/comment5.test, tests/comment6.test, tests/comment7.test, tests/comment8.test, tests/comment9.test, tests/compile.test, tests/compile_f90_c_cxx.test, tests/compile_f_c_cxx.test, tests/cond.test, tests/cond10.test, tests/cond11.test, tests/cond13.test, tests/cond14.test, tests/cond15.test, tests/cond16.test, tests/cond17.test, tests/cond18.test, tests/cond19.test, tests/cond2.test, tests/cond20.test, tests/cond21.test, tests/cond22.test, tests/cond23.test, tests/cond24.test, tests/cond25.test, tests/cond26.test, tests/cond27.test, tests/cond28.test, tests/cond29.test, tests/cond3.test, tests/cond30.test, tests/cond31.test, tests/cond32.test, tests/cond33.test, tests/cond34.test, tests/cond35.test, tests/cond36.test, tests/cond37.test, tests/cond4.test, tests/cond5.test, tests/cond6.test, tests/cond7.test, tests/cond8.test, tests/cond9.test, tests/condd.test, tests/condhook.test, tests/condinc.test, tests/condinc2.test, tests/condlib.test, tests/condman.test, tests/condman2.test, tests/conf2.test, tests/confdeps.test, tests/conff.test, tests/conff2.test, tests/confh.test, tests/confh4.test, tests/confh5.test, tests/config.test, tests/confincl.test, tests/conflnk.test, tests/conflnk2.test, tests/conflnk3.test, tests/confsub.test, tests/confvar.test, tests/confvar2.test, tests/copy.test, tests/ctarget1.test, tests/cxx.test, tests/cxx2.test, tests/cxxansi.test, tests/cxxcpp.test, tests/cxxlibobj.test, tests/cxxlink.test, tests/cxxnoc.test, tests/cxxo.test, tests/cygwin32.test, tests/dash.test, tests/defs.in, tests/defun.test, tests/defun2.test, tests/dejagnu.test, tests/dejagnu2.test, tests/dejagnu3.test, tests/dejagnu4.test, tests/dejagnu5.test, tests/dejagnu6.test, tests/dejagnu7.test, tests/depacl2.test, tests/depcomp.test, tests/depcomp2.test, tests/depcomp3.test, tests/depcomp4.test, tests/depcomp5.test, tests/depdist.test, tests/depend.test, tests/depend2.test, tests/depend3.test, tests/depend4.test, tests/destdir.test, tests/dirforbid.test, tests/dirlist.test, tests/discover.test, tests/distcom2.test, tests/distcom3.test, tests/distcom4.test, tests/distcom5.test, tests/distcom6.test, tests/distcom7.test, tests/distdir.test, tests/distname.test, tests/dollar.test, tests/double.test, tests/dup2.test, tests/else.test, tests/empty.test, tests/empty2.test, tests/empty3.test, tests/empty4.test, tests/exdir.test, tests/exdir2.test, tests/exeext.test, tests/exeext2.test, tests/exeext3.test, tests/exeext4.test, tests/exsource.test, tests/ext.test, tests/ext2.test, tests/extra.test, tests/extra2.test, tests/extra3.test, tests/extra4.test, tests/extra5.test, tests/extra6.test, tests/extra7.test, tests/f90only.test, tests/flibs.test, tests/fn99.test, tests/fnoc.test, tests/fo.test, tests/fonly.test, tests/fortdep.test, tests/fpinst2.test, tests/fpinstall.test, tests/gcj.test, tests/gcj2.test, tests/gcj3.test, tests/gcj4.test, tests/gcj5.test, tests/getopt.test, tests/gettext.test, tests/gettext2.test, tests/gnits.test, tests/gnits2.test, tests/gnits3.test, tests/gnumake.test, tests/gnuwarn.test, tests/gnuwarn2.test, tests/header.test, tests/help.test, tests/hfs.test, tests/hosts.test, tests/implicit.test, tests/include.test, tests/include2.test, tests/info.test, tests/insh2.test, tests/install2.test, tests/installdir.test, tests/instdat.test, tests/instdat2.test, tests/instexec.test, tests/insthook.test, tests/instman.test, tests/instman2.test, tests/instsh.test, tests/instsh2.test, tests/instspc.test, tests/interp.test, tests/interp2.test, tests/java.test, tests/java2.test, tests/java3.test, tests/javaprim.test, tests/javasubst.test, tests/ldadd.test, tests/ldflags.test, tests/lex.test, tests/lex2.test, tests/lex3.test, tests/lex4.test, tests/lex5.test, tests/libobj10.test, tests/libobj11.test, tests/libobj12.test, tests/libobj13.test, tests/libobj14.test, tests/libobj2.test, tests/libobj3.test, tests/libobj4.test, tests/libobj5.test, tests/libobj7.test, tests/libobj8.test, tests/library.test, tests/library2.test, tests/library3.test, tests/libtool.test, tests/libtool2.test, tests/libtool3.test, tests/libtool4.test, tests/libtool5.test, tests/libtool6.test, tests/libtool7.test, tests/libtool8.test, tests/libtool9.test, tests/license.test, tests/link_c_cxx.test, tests/link_dist.test, tests/link_f90_only.test, tests/link_f_only.test, tests/link_fc.test, tests/link_fccxx.test, tests/link_fcxx.test, tests/lisp2.test, tests/lisp3.test, tests/lisp4.test, tests/lisp5.test, tests/lisp6.test, tests/lisp7.test, tests/lisp8.test, tests/listval.test, tests/location.test, tests/longlin2.test, tests/longline.test, tests/ltcond.test, tests/ltcond2.test, tests/ltconv.test, tests/ltdeps.test, tests/ltlibobjs.test, tests/ltlibsrc.test, tests/maintclean.test, tests/make.test, tests/makej.test, tests/makevars.test, tests/man.test, tests/man2.test, tests/mclean.test, tests/mdate.test, tests/mdate2.test, tests/mdate3.test, tests/mdate4.test, tests/missing.test, tests/missing2.test, tests/missing3.test, tests/mkinst2.test, tests/mkinstall.test, tests/mmodely.test, tests/multlib.test, tests/nobase.test, tests/nodef.test, tests/nodef2.test, tests/nodep.test, tests/nodepcomp.test, tests/nodist.test, tests/nodist2.test, tests/nodist3.test, tests/nogzip.test, tests/nogzip2.test, tests/noinst.test, tests/noinstdir.test, tests/nolink.test, tests/nostdinc.test, tests/number.test, tests/obsolete.test, tests/order.test, tests/outdir.test, tests/output.test, tests/output10.test, tests/output11.test, tests/output12.test, tests/output2.test, tests/output3.test, tests/output4.test, tests/output5.test, tests/output6.test, tests/output7.test, tests/output8.test, tests/output9.test, tests/overrid.test, tests/parse.test, tests/percent.test, tests/percent2.test, tests/phony.test, tests/pluseq.test, tests/pluseq10.test, tests/pluseq2.test, tests/pluseq3.test, tests/pluseq4.test, tests/pluseq5.test, tests/pluseq6.test, tests/pluseq7.test, tests/pluseq8.test, tests/pluseq9.test, tests/postproc.test, tests/ppf77.test, tests/pr2.test, tests/pr204.test, tests/pr211.test, tests/pr220.test, tests/pr224.test, tests/pr229.test, tests/pr243.test, tests/pr266.test, tests/pr279-2.test, tests/pr279.test, tests/pr287.test, tests/pr300-lib.test, tests/pr300-ltlib.test, tests/pr300-prog.test, tests/pr307.test, tests/pr401.test, tests/pr401b.test, tests/pr401c.test, tests/pr72.test, tests/pr87.test, tests/pr9.test, tests/prefix.test, tests/primary.test, tests/primary2.test, tests/primary3.test, tests/proginst.test, tests/python.test, tests/python10.test, tests/python11.test, tests/python12.test, tests/python2.test, tests/python3.test, tests/python4.test, tests/python5.test, tests/python6.test, tests/python7.test, tests/python8.test, tests/python9.test, tests/recurs.test, tests/recurs2.test, tests/regex.test, tests/remake.test, tests/remake2.test, tests/remake3.test, tests/remake4.test, tests/remake5.test, tests/req.test, tests/reqd.test, tests/reqd2.test, tests/rulepat.test, tests/scripts.test, tests/seenc.test, tests/sinclude.test, tests/space.test, tests/specflg.test, tests/specflg2.test, tests/specflg3.test, tests/specflg6.test, tests/specflg7.test, tests/specflg8.test, tests/specflg9.test, tests/spell.test, tests/spell2.test, tests/spell3.test, tests/spelling.test, tests/spy.test, tests/srcsub.test, tests/srcsub2.test, tests/stamph2.test, tests/stdlib.test, tests/stdlib2.test, tests/strip.test, tests/subcond.test, tests/subcond2.test, tests/subcond3.test, tests/subdir.test, tests/subdir2.test, tests/subdir3.test, tests/subdir4.test, tests/subdir5.test, tests/subdir6.test, tests/subdir7.test, tests/subdir8.test, tests/subdir9.test, tests/subdirbuiltsources.test, tests/subobj.test, tests/subobj2.test, tests/subobj3.test, tests/subobj4.test, tests/subobj5.test, tests/subobj6.test, tests/subobj7.test, tests/subobj8.test, tests/subobj9.test, tests/subobjname.test, tests/subpkg.test, tests/subpkg2.test, tests/subst.test, tests/subst2.test, tests/substre2.test, tests/substref.test, tests/substtarg.test, tests/suffix.test, tests/suffix10.test, tests/suffix11.test, tests/suffix2.test, tests/suffix3.test, tests/suffix4.test, tests/suffix5.test, tests/suffix6.test, tests/suffix7.test, tests/suffix8.test, tests/suffix9.test, tests/symlink.test, tests/symlink2.test, tests/symlink3.test, tests/syntax.test, tests/tags.test, tests/tagsub.test, tests/tar.test, tests/tar2.test, tests/tar3.test, tests/target-cflags.test, tests/targetclash.test, tests/transform.test, tests/txinfo.test, tests/txinfo10.test, tests/txinfo13.test, tests/txinfo16.test, tests/txinfo17.test, tests/txinfo18.test, tests/txinfo19.test, tests/txinfo2.test, tests/txinfo20.test, tests/txinfo21.test, tests/txinfo22.test, tests/txinfo23.test, tests/txinfo24.test, tests/txinfo25.test, tests/txinfo26.test, tests/txinfo27.test, tests/txinfo28.test, tests/txinfo29.test, tests/txinfo3.test, tests/txinfo4.test, tests/txinfo5.test, tests/txinfo6.test, tests/txinfo7.test, tests/txinfo8.test, tests/txinfo9.test, tests/unused.test, tests/vars.test, tests/vars3.test, tests/vartar.test, tests/version.test, tests/version2.test, tests/version3.test, tests/version4.test, tests/version6.test, tests/version7.test, tests/version8.test, tests/vpath.test, tests/vtexi.test, tests/vtexi2.test, tests/warnopts.test, tests/werror.test, tests/werror2.test, tests/whoami.test, tests/xsource.test, tests/yacc.test, tests/yacc2.test, tests/yacc3.test, tests/yacc4.test, tests/yacc5.test, tests/yacc6.test, tests/yacc7.test, tests/yacc8.test, tests/yaccpp.test, tests/yaccvpath.test: Update FSF postal mail address. | |
|
d82b453e | 2004-01-01 18:54:20 | Do not output .lo rules for programs and static libraries objects, and do not output .o/.obj rules for libtool libraries. This is about explicit rules only, not inference rules. * automake.in (handle_single_transform_list): Rename as ... (handle_single_transform): ... this. Take a single file to transform (it was only called this way) and accept a new %transform argument. Fill %lang_specific_files with list references instead of strings, and append %transform to each of these lists. (define_objects_from_sources, handle_source_transform): Take a %transform argument, and forward it to &handle_single_transform. (handle_languages): Adjust to the new format of %lang_specific_files, and honor its %transform part. (handle_programs, handle_libraries, handle_ltlibraries): Override %NONLIBTOOL% and %LIBTOOL% while calling handle_source_transform. (make_paragraphs): Define %NONLIBTOOL% by default. Make sure %transform settings override global settings. * lib/am/depend2.am (%OBJ%, %OBJOBJ%): Define only if %NONLIBTOOL%. * tests/libtool3.test: Augment to check Makefile.ins for unneeded rules. Suggested by Thomas Fitzsimmons. | |
|
13089ee2 | 2003-12-30 23:49:58 | * automake.in (handle_languages): Define %DEPBASE% conditionally on subdir-objects. Define SUBDIROBJ. Do not clean *_.c files here ... (lang_c_finish): ... do it here. (handle_single_transform_list): Do not output specific rules for subdir-objects files which are not renamed. This should reduce the size of Makefiles with lots of subdirectory sources. * lib/depcomp: Simplify computation of dependency output, and use DEPDIR. * lib/am/depend2.am (%EXT%.o, %EXT%.obj, %EXT%.lo): Adjust call to depcomp. Compute depbase on-the-fly in generic fastdep rules for subdir-objects. * tests/ansi9.test: Do not grep for an explicit rule that we no longer expect. Really run $MAKE to make sure the chain of rules works. * tests/yacc5.test: Do not grep for an explicit rule that we no longer expect. Adjust to use set -e. | |
|
3ff71ab7 | 2003-11-08 14:03:35 | * lib/am/depend2.am (?GENERIC?%EXT%.o, ?GENERIC?%EXT%.obj) (?GENERIC?%EXT%.lo): Do not echo compile command manually, this breaks `make -s'. Instead, fold the compile command on two lines, so that it take less space on the display. Suggested by Karl Berry and William Fulton. | |
|
b36e1c8d | 2003-03-13 20:50:59 | * lib/am/depend2.am (?GENERIC?%EXT%.o, ?GENERIC?%EXT%.obj) (?GENERIC?%EXT%.lo): Use `mv -f' instead of `mv' in FASTDEP mode. Suggested by Matthias Andree. | |
|
0b0f6d10 | 2003-03-08 09:02:15 | * lib/am/depend2.am (?GENERIC?%EXT%.o, ?GENERIC?%EXT%.obj) (?GENERIC?%EXT%.lo): Hide the if/then/else machinery for FASTDEP. Just echo the gcc command. Suggested by Karl Berry. | |
|
6ceac84e | 2003-03-06 21:18:57 | * lib/am/depend2.am (?GENERIC?%EXT%.lo): Do not use `test -f foo || echo $(srcdir)/` to emulate a VPATH search when outputing suffix rules. This follows 2003-02-25's change. * lib/am/lex.am (?GENERIC?%EXT%%DERIVED-EXT%): Likewise. * lib/am/yacc.am (?GENERIC?%EXT%%DERIVED-EXT%): Likewise. | |
|
29e44495 | 2003-03-06 21:11:48 | * lib/am/depend2.am (?GENERIC?%EXT%.lo): Do not use `test -f foo || echo $(srcdir)/` to emulate a VPATH search when outputing suffix rules. This follows 2003-02-25's change. * lib/am/lex.am (?GENERIC?%EXT%%DERIVED-EXT%): Likewise. * lib/am/yacc.am (?GENERIC?%EXT%%DERIVED-EXT%): Likewise. | |
|
421258da | 2003-02-25 20:07:33 | * lib/am/depend2.am (?GENERIC?%EXT%.o, ?GENERIC?%EXT%.obj): Do not use the `test -f foo || echo $(srcdir)/` to emulate a VPATH search when outputing suffix rules. * lib/am/texibuild.am (?GENERIC?%SOURCE_SUFFIX%.dvi) (?GENERIC?%SOURCE_SUFFIX%.pdf): Likewise. Suggested by Bruno Haible. | |
 |
3de705e1 | 2002-11-14 20:22:03 | 2002-11-14 Eric Blake <ebb9@email.byu.edu> * lib/am/depend2.am: Add missing fi in c.obj rules. | |
|
b89b34e5 | 2002-09-08 13:40:05 | 2002-09-08 Andreas Buening <andreas.buening@nexgo.de> Fix for automake/334: * lib/am/depend2.am: Replaced "cygpath -w" by $(CYGPATH_W). * m4/init.m4: New make variable CYGPATH_W. | |
 |
81f28359 | 2002-08-24 03:32:12 | (%EXT%.lo): Fix typo. Rename the file that was generated by gcc -MF. | |
|
647d49ca | 2002-08-15 17:32:12 | 2002-08-15 Art Haas <ahaas@neosoft.com> * lib/am/depend2.am: Use correct name for dependency file in libtool fastdep case. | |
|
7c28e462 | 2002-08-14 16:21:00 | 2002-08-14 Art Haas <ahaas@neosoft.com> * lib/am/depend2.am: Added missing `;'. | |
|
4d6b294f | 2002-07-10 05:33:31 | * lib/am/depend2.am: Reworked syntax to avoid parsing problem. | |
|
ff978a7a | 2002-07-10 04:41:55 | * lib/am/depend2.am: Search in srcdir and builddir for %SOURCE% before passing to cygpath. Partial fix for PR automake/334. | |
|
285aebe9 | 2002-07-07 22:38:46 | * m4/depend.m4 (_AM_DEPENDENCIES): Compute am__fastdep<compiler> conditional. * automake.in (handle_languages): Compute FASTDEP. * lib/am/depend2.am: Added %FASTDEP% mode. | |
|
52205f5e | 2002-03-26 09:24:53 | Fix for PR automake/310: * lib/am/depend2.am, lib/am/lex.am, lib/am/yacc.am: Quote %SOURCE% so it never appears as a plain word. | |
|
d35c37e9 | 2002-01-20 21:30:21 | For PR automake/224: * tests/Makefile.am (TESTS): Added pr224.test. * tests/pr224.test: New file. * lib/depcomp: Fixed computation of depfile. * lib/am/depend2.am: Use %DEPBASE%, not $(DEPDIR). * automake.in (handle_single_transform_list): Only reject `..' component for Java. Put dependencies in directory near object. (handle_languages): Set DEPBASE. Handle de-ansi-fication. | |
|
f391cff9 | 2001-11-16 10:25:58 | At every place where an "$extension" is used, include the leading dot in the extension, don't hardcode it when building the filename. That will make any support for a dot-less extension easier to add. * automake.in (SUFFIX_RULE_PATTERN): Include extension dots in backref groups. ("main"): Prepend a '.' to the supported extensions of all languages (e.g. 'c' becomes '.c'). (handle_languages, handle_single_transform_list, handle_lib_objects_cond, handle_headers, derive_suffix, rule_define): Do not add a dot before extensions, and include dots in matching groups. * lib/am/depend2.am (.%EXT%.o, .%EXT%.obj, .%EXT%.lo): Rename as ... (%EXT%.o, %EXT%.obj, %EXT%.lo): ... these. * lib/am/lex.am (.%EXT%.%DERIVED-EXT%): Rename as ... (%EXT%%DERIVED-EXT%): ... this. * lib/am/yacc.am: Likewise. | |
 |
8a7cf404 | 2001-05-14 09:39:24 | Typo. | |
|
bbf3f9c6 | 2001-05-13 17:19:18 | * lang-compile.am: New file, loaded once per language. * depend2.am: Move definitions loaded once per language in the aforementioned file. * automake.in (&handle_languages): Load it. (&lang_ppf77_finish, &lang_ratfor_finish): Remove as it's now handled by lang-compile.am. | |
|
beeeae16 | 2001-05-08 10:38:12 | Note: This patch breaks Automake. Repaired within two patches. * automake.in (Language): Replace the attribute `output_arg' with `compile_flag' and `output_flag'. (Automake): Adjust language registrations. (&handle_languages): Transform `-c' and `-o' for both suffix and per object rules, instead of `OUTARG' and `LTOUTARG' only for generic rules. (&handle_single_transform_list): Adjust to `compile_flag' and `output_flag'. * depend2.am, ext-compile.am: Use `%-c%' and `%-o%'. | |
|
e71635c7 | 2001-04-27 12:55:48 | * automake.in (&lang_extensions): Remove. (&add_depend2, &saw_sources_p): Adjust. * depend2.am: `%EXT%' no longer includes the dot. | |
|
8c160048 | 2001-04-11 17:29:06 | * depend2.am: Fix the `if' condition for Libtool. Reported by Robert Boehne. | |
|
5871219c | 2001-04-09 14:50:53 | Use AM_CONDITIONAL and if/endif for AMDEP. * m4/depend.m4 (AM_DEP_TRACK): Use AM_CONDITIONAL to define AMDEP. * automake.in (&add_depend2): Transform %AMDEP% into `AMDEP' (leading to a configure time if/endif), or to `FALSE' (static removal of the code). (&handle_dependencies): Adjust to use `AMDEP_TRUE'. * depend2.am: Use if/endif. Adjust the 101 tests that use dependencies so that they properly invoke aclocal before automake. They need to `see' `AM_CONDITIONAL([AMDEP], ...)'. | |
|
fc0250b3 | 2001-04-09 09:03:11 | * depend2.am (@AMDEP@%FPFX%DEPMODE): Define it when GENERIC so that it does not get noticed twice by automake, which now complains for multiple definitions. * tests/vartar.test: s/INSTALL/install/g, automake now complains because we defined INSTALL. | |
|
65e17bce | 2001-03-05 15:03:00 | If OBJEXT and EXEEXT are not set, provide a default value, and use them unconditionally. * automake.in (&generate_makefile): Provide default values for EXEEXT and OBJEXT. (&get_object_extension, &finish_languages) (&handle_single_transform_list, &handle_programs, &add_depend2) (&check_cygnus, &lang_c_finish, am_install_var): Don't bother with them, they are defined. * compile.am, depend2.am, program.am, progs.am: Likewise. * remake-hdr.am: Fix a typo. * tests/cxxo.test, tests/fo.test, tests/implicit.test, * tests/interp.test, tests/subobj.test, tests/subobj2.test, * tests/suffix2.test: Adjust. | |
|
e1cca10d | 2001-03-02 19:44:19 | 2001-03-02 Jens Kr | |
|
29ade8c7 | 2001-02-28 09:53:11 | * automake.in (&add_depend2): Transform `GENERIC'. Get rid of the ad hoc transformation of `@EXT@.o:' which in addition was broken by the `@ -> %' patch. * depend2.am: Adjust to use ?GENERIC?. | |
|
e8133bcf | 2001-02-27 09:12:42 | Distinguish automake substitutions from config.status substitutions. * automake.in (&add_depend2): Transform AMDEP. (&handle_clean): Transform MCFILES and MFILES. (&file_contents): Transform MAINTAINER_MODE. (&transform, &am_install_var): Use `%', not `@'. Adjust all the *.am files. * clean.am: Use ?MFILES? instead of ad hoc MAINTAINERCLEAN. * depend2.am: Display the double dependency on both ?AMDEP? and @AMDEP@. | |
|
4ec2083b | 2001-02-09 03:38:16 | * automake.in (&transform): Use `my', not `local'. (&transform_cond): New. (&get_object_extension, &handle_texinfo, &handle_tags) (&handle_dist_worker, &handle_dist, &add_depend2, &handle_clean) (&handle_tests_dejagnu): Use it. * texinfos.am, lisp.am, header.am, dist.am, distdir.am, depend2.am * dejagnu.am, data.am, clean.am: Adjust to the new syntax. | |
|
148a155a | 2001-01-31 16:50:02 | * depend2.am: Instead of replacing @PFX@ in $(@PFX@COMPILE), and then replacing `$(@PFX@COMPILE)' for the files that need some special flags, use only @COMPILE@. Similarly for @LTCOMPILE@. Try to document this file. * automake.in (add_depend2): Adjust to these changes. | |
|
a2c34841 | 2000-10-16 09:01:36 | * aclocal.in, aclocal.m4: Standardize FSF Copyright statements. * automake.in, automake.texi: Likewise. * clean-kr.am, clean.am: Likewise. * comp-vars.am: Likewise. * compile, compile.am: Likewise. * data-clean.am: Likewise. * data.am: Likewise. * dejagnu.am: Likewise. * depcomp: Likewise. * depend.am, depend2.am: Likewise. * dist-vars.am, dist.am: Likewise. * elisp-comp: Likewise. * footer.am: Likewise. * header-vars.am, header.am: Likewise. * java-clean.am java.am: Likewise. * kr-extra.am: Likewise. * library.am: Likewise. * libs-clean.am, libs.am: Likewise. * libtool.am: Likewise. * lisp-clean.am lisp.am: Likewise. * ltlib-clean.am ltlib.am: Likewise. * ltlibrary.am: Likewise. * m4/Makefile.in: Likewise. * m4/strtod.m4: Likewise. * mans-vars.am, mans.am: Likewise. * mdate-sh: Likewise. * missing: Likewise. * multilib.am: Likewise. * program.am: Likewise. * progs-clean.am, progs.am: Likewise. * python-clean.am, python.am: Likewise. * remake-hdr.am, remake.am: Likewise. * scripts.am: Likewise. * subdirs.am: Likewise. * tags-clean.am, tags.am: Likewise. * texi-vers.am: Likewise. * texinfos.am: Likewise. * ylwrap: Likewise. | |
|
dd16cf36 | 2000-03-19 23:43:57 | * depend2.am (@EXT@.o): Look for the source file in srcdir as well as the current directory. (@EXT@.lo): Likewise. | |
|
e13f3ed4 | 1999-12-14 04:10:36 | * depend2.am: Removed erroneous comment. * automake.texi (Program variables): Document nostdinc. (Options): Likewise. * automake.in (get_object_extension): Respect nostdinc option. (handle_options): Recognize nostdinc. * comp-vars.am (DEFS): Use @DEFAULT_INCLUDES@ as sole substitution. * automake.in (read_am_file): Allow conditional includes. Fixes test condincl.test. | |
|
15b9247d | 1999-12-13 21:52:11 | * depcomp: Handle case on SGI when libtool is `yes'. * depend2.am (@EXT@.o): Set libtool. (@EXT@.lo): Likewise. (@EXT@.obj): Likewise. | |
|
9ae48df8 | 1999-11-21 21:35:41 | Merged from user-dep-gen-branch. | |
|
546c5271 | 1999-04-27 13:57:07 | * automake.in (handle_lib_objects_cond): Prefer `$1' over `\1'. Minor rewrite for clarity. (check_canonical_spelling): Prefer `$1' over `\1'. * depend2.am (@OBJ@): Renamed. Use @SOURCE@, @COMPILE@. Always use `-o $@'. (@LTOBJ@): Likewise. * automake.in (handle_single_transform_list): Don't print rule if doing dependency tracking and the file's language supports it. (initialize_per_input): Initialize lang_specific_files. (add_depend2): New function. (handle_dependencies): Use it. * automake.in (lang_ppf77_finish): Use lang_f77_finish. ratfor compiler name is `RCOMPILE'. ppf77 compiler name changed to `PPF77COMPILE' to allow use of f77 and ppf77 in the same directory. (lang_ratfor_finish): Use lang_f77_finish. * compile.am (NOTDEPEND.c.o): Removed. (OBJEXT.c.obj): Likewise. * automake.in: Added `flags' attribute to all relevant languages. (handle_single_transform_list): Handle per-derived-object flags. Changed interface and all callers. (handle_built_sources): Don't call handle_single_transform_list. Added `compile' and `compiler-name' attribute to all relevant languages. (finish_languages): Define compiler variables here. (lang_cxx_finish): Don't call define_compiler_variable. Don't define flag variable or .o rules. Don't add to @suffixes. (lang_f77_finish): Likewise. (lang_ppf77_finish): Likewise. (lang_objc_finish): Likewise. (lang_java_finish): Likewise. (finish_languages): Define flag variable here. Added `output-arg' attribute to all relevant languages. (finish_languages): Define `.o' rules here. (finish_languages): Put extension on @suffixes. (get_object_extension): Don't transform NOTDEPEND or MINUSO. | |
|
aa185593 | 1999-04-10 22:51:51 | * depend2.am (%.o): Use `$(*D)/$(*F)', not just `$(*F)'. (%.lo): Likewise. | |
|
dd97b9db | 1999-01-06 12:41:34 | * depend2.am (%.o): Use \012, not \n, to avoid losing `tr's. From Bill Currie. (%.lo): Likewise. | |
|
8ae21c4d | 1998-12-22 12:14:05 | * depend2.am: Don't assume backslash can't occur in the middle of filename; it loses on M$W | |
|
12dae131 | 1998-12-21 13:32:57 | 1998-12-21 Alexandre Oliva <oliva@dcc.unicamp.br> * depend2.am: don't use .p and .P for dependencies; it loses on case-insensitive filesystems. Reported by Henrik Frystyk Nielsen <frystyk@w3.org> | |
|
53c82a94 | 1998-10-05 23:11:13 | * depend2.am (%.lo): Handle case where compiler does not put space before ":". From Raja R Harinath. * automake.in (scan_one_configure_file): AC_CONFIG_HEADER is not obsolete; it simply isn't preferred with automake. (scan_one_configure_file): Likewise for AC_DECL_YYTEXT and AC_PROG_LEX. * automake.in (am_line_error): Handle case where variable defined in configure.in. Fixes test badline.test. (%configure_vars): Redefined meaning of values. (scan_one_configure_file): Set $configure_vars values appropriately. | |
|
aff7619c | 1998-10-03 11:28:01 | Bug fix from Jim Blandy: * depend2.am (%.lo): When editing the dependency file to add the .lo file to the targets, allow for whitespace between the end of the filename and the colon. Some compilers (notably the Cygnus release of GCC 2.7-97r1) put space there: "alist.o : ..." | |
|
5949ff93 | 1998-10-01 21:53:55 | * depend2.am (%.o): Append sed results to .P file in this case too. From Raja R Harinath. | |
|
eb7c20a1 | 1998-10-01 01:36:35 | * depend2.am: Don't bother trying to delete source file from list. | |
|
f00e3de5 | 1998-10-01 01:31:07 | * depend2.am (%.o): Handle deleted header file problem. (%.lo): Likewise. | |
|
5de4fd84 | 1998-02-24 06:25:15 | more dependency fixes | |
|
cb1f004a | 1998-02-23 23:49:39 | dependency fixes from alexandre oliva | |
|
3984c200 | 1998-02-13 07:27:36 | side-effect dependency tracking | |
|
7434bb5f | 1997-06-01 19:54:31 | various bug fixes | |
|
d9f53bbd | 1997-05-04 21:50:12 | avoid Debian install-info handle sources in other directories | |
|
6cd61c69 | 1997-03-31 19:15:34 | dependency fix | |
|
38bca416 | 1996-12-04 02:04:43 | Fixes from Gord | |
|
ee31c619 | 1996-11-15 06:54:00 | Bug fixes | |
|
97b46070 | 1996-09-08 16:47:47 | Added version-number checking | |
|
314dd9a1 | 1996-09-05 03:02:31 | Rewrote dependency handling | |
|
c98183d6 | 1996-08-11 07:42:38 | Better C++, yacc, lex support |