kmx git

Commit	Date	Message
74017b56	2013-05-16T12:18:43	tests: remove exec bit from all of them ('micro' branch) It gives the impression that they are directly runnable, as with "./t/foo.sh", but it has been a while since that was the case. Today, tests are runnable only through "make check" or "./runtest". This change is for the 'micro' branch (automake 1.13.2a). It will soon be followed by similar patches for the 'maint' branch (automake 1.13a) and the 'master' branch (automake 1.99a). * t/.sh, t/.tap: Remove executable bit. * maint.mk (sc_tests_executable): Remove. (syntax_check_rules): Adjust. * gen-testsuite-part: Set permissions of generated tests to '444' (-r--r--r--), rather than 555 (-r-xr-xr-x). Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
7df8b28c	2012-12-31T18:18:37	maint: update copyright year for 2013 (in branch maint) Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
5ddf1007	2012-10-27T16:41:39	tests: prefer including 'test-init.sh' rather than './defs' This is a follow-up to today's commit v1.12.4-22-g0610fc8, "tests: prepare to move ./defs to t/ax/test-init.sh" * All tests: To run the common setup, use the command: . test-init.sh instead of the older, "historical" one: . ./defs \|\| exit 1 Note that the "\|\| exit 1" wasn't really useful, since the 'errexit' shell flag is in effect in both './defs' and 'test-init.sh', and all the known shells that are good enough to run the automake testsuite do automatically exit with error when a sourced file cannot be found (at least, they do so in non-interactive mode, which is the only mode that concerns us in the testsuite). * t/ax/tap-summary-aux.sh, t/ax/testsuite-summary-checks.sh: Likewise. * gen-testsuite-part: Do the same in the generated tests. Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
2abe1833	2012-08-24T10:47:17	AM_INIT_AUTOMAKE: allow obsolescent two-args invocation once again This partially reverts commit 'v1.12-67-ge186355' of 2012-05-25, "init: obsolete usages of AM_INIT_AUTOMAKE not supported anymore" Some users still need to be able to define the version number for their package dynamically, at configure runtime. Their user case is that, for development snapshots, they want to be able to base the complete version of the package on the VCS revision ID (mostly Git or Mercurial). They could of course do so by specifying such version dynamically in their call to AC_INIT, as is done by several GNU packages. But then they would need to regenerate and re-run the configure script before each snapshot, which might be very time-consuming for complex packages, to the point of slowing down and even somewhat impeding development. The situation should truly be solved in Autoconf, by allowing a way to specify the version dynamically in a way that doesn't force the configure script to be regenerated and re-run every time the package version changes. But until Autoconf has been improved to allow this, Automake will have to support the obsolescent two-arguments invocation for AM_INIT_AUTOMAKE, to avoid regressing the suboptimal but working solution for the use case described above. See also: <http://lists.gnu.org/archive/html/automake/2012-08/msg00025.html> * NEWS: Update. * m4/init.m4 (AM_INIT_AUTOMAKE): Support once again invocation with two or three arguments. * t/aminit-moreargs-no-more.sh: Renamed ... * t/aminit-moreargs-deprecated.sh: ... like this, and updated. * t/nodef.sh: Recovered test, with minor adjustments. * t/backcompat.sh: Likewise. * t/backcompat2.sh: Likewise. * t/backcompat3.sh: Likewise. * t/backcompat6.sh: Likewise. * t/list-of-tests.mk: Adjust. Suggested-by: Bob Friesenhahn n<bfriesen@simple.dallas.tx.us> Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
cbc0fc85	2012-08-13T12:10:46	cosmetics: fix typos and references in comments * lib/am/check.am: Here. * doc/automake.texi: And here. * t/*.sh: And in several of these tests. Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
c2a52bf0	2012-06-24T10:36:15	tests: simpler workaround for shells losing the exit status in exit trap Now that we can assume our tests are run by a decent POSIX shell, we can simplify our workaround aimed at having the exit status propagated correctly to the code in the exit trap. Unfortunately, we cannot dispense with such a workaround altogether, because it's still required by some shells we need to support (at least Solaris 10 /bin/ksh and /usr/xpg4/bin/sh). For more information about the need of that workaround, see the entry about 'trap' in the section "Limitations of Shell Builtins" in the Autoconf manual: <http://www.gnu.org/software/autoconf/manual/autoconf.html#trap> The new workaround has been tested successfully with the following shells: - Bash 4.1 - Bash 3.2 - Bash 3.0 - Bash 2.05b - dash 0.5.5.1 - dash 0.5.2 - AT&T Ksh 93u (from official Debian package) - MirBSD Korn Shell 40.2 (from official Debian package) - Solaris 9, 10 and 11 /bin/ksh - Solaris 9, 10 and 11 /usr/xpg4/bin/sh - NetBSD 5.1 /bin/sh - NetBSD 5.1 /bin/ksh * t/ax/test-init.sh (Exit): Rename ... (_am_exit): ... like this. (exit): New alias for '_am_exit'. We cannot simply redefine 'exit' as a shell function, because some shells (dash 0.5.5.1, Solaris 10 /bin/ksh and /usr/xpg4/bin/sh) do not allow it. (_am_exit, trap): Add extra escaping for 'exit' calls, to ensure we really invoke the 'exit' builtin and not our alias with the same name. * configure.ac: Check that the shell selected to run our testsuite supports aliases named like shell builtins. * t/REAMDE: Adjust. * All tests: Adjust, by simply using 'exit' instead of 'Exit'. * t/self-check-explicit-skips.sh: Adjust: the first usage of 'exit' after it has been redefined as an alias must be on a new line w.r.t. that where the alias is defined, in order for the redefinition to be honored. * syntax-checks.mk (sc_tests_Exit_not_exit): Delete. (sc_tests_exit_not_Exit): New. (syntax_check_rules): Adjust. (sc_tests_automake_fails): Simplify the recipe a little. * Several tests: Remove now useless spurious quoting once required to placate the 'sc_tests_Exit_not_exit' maintainer check. * gen-testsuite-part: Likewise. Also, avoid uses of 'Exit' in the generated scripts. Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
e186355f	2012-05-19T11:47:26	init: obsolete usages of AM_INIT_AUTOMAKE not supported anymore This is a follow-up on commit v1.12-66-g27136df of 2012-05-06, "init: warn against obsolete usage of AM_INIT_AUTOMAKE". With this change, we drop support for the two-arguments and three-arguments invocation forms of the AM_INIT_AUTOMAKE macro, as in either of: AM_INIT_AUTOMAKE($PACKAGE, $VERSION) AM_INIT_AUTOMAKE($PACKAGE, $VERSION, NODEFINE) * NEWS, doc/automake.texi: Update. * m4/init.m4 (AM_INIT_AUTOMAKE): Report the two- and three-arguments invocation form as a hard error. * t/aminit-moreargs-deprecation.sh: Renamed ... * t/aminit-moreargs-deprecation.sh: ... to this, and updated to check the new semantics. * t/ac-output-old.tap: Adjust by avoiding old-style uses of AC_INIT and AM_INIT_AUTOMAKE. * t/acsilent.sh: Likewise. * t/dirlist.sh: Likewise. * t/dirlist2.sh: Likewise. * t/req.sh: Likewise. * t/nodef.sh: Remove as obsolete. * t/version.sh: Likewise. * t/version2.sh: Likewise. * t/backcompat.sh: Likewise. * t/backcompat2.sh: Likewise. * t/backcompat3.sh: Likewise. * t/backcompat5.sh: Likewise. * t/backcompat4.sh: Renamed ... * t/backcompat-acout.sh: ... to this. * t/list-of-tests.mk: Adjust. Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
8a5096d1	2012-04-06T13:12:25	tests: rename 'tests/' => 't/', '.test' => '.sh' When we (soon) convert the Automake testsuite to a non-recursive make setup, we'll have to fix the entries of $(TESTS) to be prepended with the subdirectory they are in; this will increase the length of $(TESTS), and thus increase the possibility of exceeding the command-line length limits on some systems (most notably, MinGW/MSYS). See automake bug#7868 for more information. Thus we rename the 'tests/' subdirectory to 't/', and each 'x.test' script in there to 'x.sh'; this way, the $(TESTS) entry 'foo.test' will become 't/foo.sh', which have the same number of characters. * tests/: Rename ... * t/: ... to this. * t/.test: Rename ... t/.sh: ... to this. t/.gitignore: Removed as obsolete. * t/defs: Adjust. * t/gen-testsuite-part: Likewise. * t/list-of-tests.mk: Likewise. * t/ccnoco.sh: Likewise. * t/ccnoco3.sh: Likewise. * t/self-check-cleanup.tap: Likewise. * t/self-check-dir.tap: Likewise. * t/self-check-me.tap: Likewise. * t/self-check-reexec.tap: Likewise. * README: Likewise. * bootstrap: Likewise * configure.ac: Likewise. * Makefile.am: Likewise. * .gitignore: Likewise. * syntax-check.mk: Likewise. Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>

74017b56

2013-05-16T12:18:43

tests: remove exec bit from all of them ('micro' branch) It gives the impression that they are directly runnable, as with "./t/foo.sh", but it has been a while since that was the case. Today, tests are runnable only through "make check" or "./runtest". This change is for the 'micro' branch (automake 1.13.2a). It will soon be followed by similar patches for the 'maint' branch (automake 1.13a) and the 'master' branch (automake 1.99a). * t/*.sh, t/*.tap: Remove executable bit. * maint.mk (sc_tests_executable): Remove. (syntax_check_rules): Adjust. * gen-testsuite-part: Set permissions of generated tests to '444' (-r--r--r--), rather than 555 (-r-xr-xr-x). Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>

7df8b28c

2012-12-31T18:18:37

maint: update copyright year for 2013 (in branch maint) Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>

5ddf1007

2012-10-27T16:41:39

tests: prefer including 'test-init.sh' rather than './defs' This is a follow-up to today's commit v1.12.4-22-g0610fc8, "tests: prepare to move ./defs to t/ax/test-init.sh" * All tests: To run the common setup, use the command: . test-init.sh instead of the older, "historical" one: . ./defs || exit 1 Note that the "|| exit 1" wasn't really useful, since the 'errexit' shell flag is in effect in both './defs' and 'test-init.sh', and all the known shells that are good enough to run the automake testsuite do automatically exit with error when a sourced file cannot be found (at least, they do so in non-interactive mode, which is the only mode that concerns us in the testsuite). * t/ax/tap-summary-aux.sh, t/ax/testsuite-summary-checks.sh: Likewise. * gen-testsuite-part: Do the same in the generated tests. Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>

2abe1833

2012-08-24T10:47:17

AM_INIT_AUTOMAKE: allow obsolescent two-args invocation once again This partially reverts commit 'v1.12-67-ge186355' of 2012-05-25, "init: obsolete usages of AM_INIT_AUTOMAKE not supported anymore" Some users still need to be able to define the version number for their package dynamically, at configure runtime. Their user case is that, for development snapshots, they want to be able to base the complete version of the package on the VCS revision ID (mostly Git or Mercurial). They could of course do so by specifying such version dynamically in their call to AC_INIT, as is done by several GNU packages. But then they would need to regenerate and re-run the configure script before each snapshot, which might be very time-consuming for complex packages, to the point of slowing down and even somewhat impeding development. The situation should truly be solved in Autoconf, by allowing a way to specify the version dynamically in a way that doesn't force the configure script to be regenerated and re-run every time the package version changes. But until Autoconf has been improved to allow this, Automake will have to support the obsolescent two-arguments invocation for AM_INIT_AUTOMAKE, to avoid regressing the suboptimal but working solution for the use case described above. See also: <http://lists.gnu.org/archive/html/automake/2012-08/msg00025.html> * NEWS: Update. * m4/init.m4 (AM_INIT_AUTOMAKE): Support once again invocation with two or three arguments. * t/aminit-moreargs-no-more.sh: Renamed ... * t/aminit-moreargs-deprecated.sh: ... like this, and updated. * t/nodef.sh: Recovered test, with minor adjustments. * t/backcompat.sh: Likewise. * t/backcompat2.sh: Likewise. * t/backcompat3.sh: Likewise. * t/backcompat6.sh: Likewise. * t/list-of-tests.mk: Adjust. Suggested-by: Bob Friesenhahn n<bfriesen@simple.dallas.tx.us> Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>

cbc0fc85

2012-08-13T12:10:46

cosmetics: fix typos and references in comments * lib/am/check.am: Here. * doc/automake.texi: And here. * t/*.sh: And in several of these tests. Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>

c2a52bf0

2012-06-24T10:36:15

tests: simpler workaround for shells losing the exit status in exit trap Now that we can assume our tests are run by a decent POSIX shell, we can simplify our workaround aimed at having the exit status propagated correctly to the code in the exit trap. Unfortunately, we cannot dispense with such a workaround altogether, because it's still required by some shells we need to support (at least Solaris 10 /bin/ksh and /usr/xpg4/bin/sh). For more information about the need of that workaround, see the entry about 'trap' in the section "Limitations of Shell Builtins" in the Autoconf manual: <http://www.gnu.org/software/autoconf/manual/autoconf.html#trap> The new workaround has been tested successfully with the following shells: - Bash 4.1 - Bash 3.2 - Bash 3.0 - Bash 2.05b - dash 0.5.5.1 - dash 0.5.2 - AT&T Ksh 93u (from official Debian package) - MirBSD Korn Shell 40.2 (from official Debian package) - Solaris 9, 10 and 11 /bin/ksh - Solaris 9, 10 and 11 /usr/xpg4/bin/sh - NetBSD 5.1 /bin/sh - NetBSD 5.1 /bin/ksh * t/ax/test-init.sh (Exit): Rename ... (_am_exit): ... like this. (exit): New alias for '_am_exit'. We cannot simply redefine 'exit' as a shell function, because some shells (dash 0.5.5.1, Solaris 10 /bin/ksh and /usr/xpg4/bin/sh) do not allow it. (_am_exit, trap): Add extra escaping for 'exit' calls, to ensure we really invoke the 'exit' builtin and not our alias with the same name. * configure.ac: Check that the shell selected to run our testsuite supports aliases named like shell builtins. * t/REAMDE: Adjust. * All tests: Adjust, by simply using 'exit' instead of 'Exit'. * t/self-check-explicit-skips.sh: Adjust: the first usage of 'exit' after it has been redefined as an alias must be on a new line w.r.t. that where the alias is defined, in order for the redefinition to be honored. * syntax-checks.mk (sc_tests_Exit_not_exit): Delete. (sc_tests_exit_not_Exit): New. (syntax_check_rules): Adjust. (sc_tests_automake_fails): Simplify the recipe a little. * Several tests: Remove now useless spurious quoting once required to placate the 'sc_tests_Exit_not_exit' maintainer check. * gen-testsuite-part: Likewise. Also, avoid uses of 'Exit' in the generated scripts. Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>

e186355f

2012-05-19T11:47:26

init: obsolete usages of AM_INIT_AUTOMAKE not supported anymore This is a follow-up on commit v1.12-66-g27136df of 2012-05-06, "init: warn against obsolete usage of AM_INIT_AUTOMAKE". With this change, we drop support for the two-arguments and three-arguments invocation forms of the AM_INIT_AUTOMAKE macro, as in either of: AM_INIT_AUTOMAKE($PACKAGE, $VERSION) AM_INIT_AUTOMAKE($PACKAGE, $VERSION, NODEFINE) * NEWS, doc/automake.texi: Update. * m4/init.m4 (AM_INIT_AUTOMAKE): Report the two- and three-arguments invocation form as a hard error. * t/aminit-moreargs-deprecation.sh: Renamed ... * t/aminit-moreargs-deprecation.sh: ... to this, and updated to check the new semantics. * t/ac-output-old.tap: Adjust by avoiding old-style uses of AC_INIT and AM_INIT_AUTOMAKE. * t/acsilent.sh: Likewise. * t/dirlist.sh: Likewise. * t/dirlist2.sh: Likewise. * t/req.sh: Likewise. * t/nodef.sh: Remove as obsolete. * t/version.sh: Likewise. * t/version2.sh: Likewise. * t/backcompat.sh: Likewise. * t/backcompat2.sh: Likewise. * t/backcompat3.sh: Likewise. * t/backcompat5.sh: Likewise. * t/backcompat4.sh: Renamed ... * t/backcompat-acout.sh: ... to this. * t/list-of-tests.mk: Adjust. Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>

8a5096d1

2012-04-06T13:12:25

tests: rename 'tests/' => 't/', '*.test' => '*.sh' When we (soon) convert the Automake testsuite to a non-recursive make setup, we'll have to fix the entries of $(TESTS) to be prepended with the subdirectory they are in; this will increase the length of $(TESTS), and thus increase the possibility of exceeding the command-line length limits on some systems (most notably, MinGW/MSYS). See automake bug#7868 for more information. Thus we rename the 'tests/' subdirectory to 't/', and each 'x.test' script in there to 'x.sh'; this way, the $(TESTS) entry 'foo.test' will become 't/foo.sh', which have the same number of characters. * tests/: Rename ... * t/: ... to this. * t/*.test: Rename ... * t/*.sh: ... to this. * t/.gitignore: Removed as obsolete. * t/defs: Adjust. * t/gen-testsuite-part: Likewise. * t/list-of-tests.mk: Likewise. * t/ccnoco.sh: Likewise. * t/ccnoco3.sh: Likewise. * t/self-check-cleanup.tap: Likewise. * t/self-check-dir.tap: Likewise. * t/self-check-me.tap: Likewise. * t/self-check-reexec.tap: Likewise. * README: Likewise. * bootstrap: Likewise * configure.ac: Likewise. * Makefile.am: Likewise. * .gitignore: Likewise. * syntax-check.mk: Likewise. Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>

kc3-lang/automake/t/nodef.sh

t/nodef.sh

Log