tests/subobj10.test


Log

Author Commit Date CI Message
Stefano Lattarini db973eaa 2012-02-21T19:47:36 tests: prefer 'configure.ac' over 'configure.in' With this change, our testsuite now uses 'configure.ac' as the name for the typical autoconf input, instead of the obsolescent 'configure.in' (which has been deprecated for several years, at least since autoconf 2.50). Most of the test cases changed by this commit have been automatically modified with this sed command (using GNU sed): sed -i 's/\<configure\(\\\?\)\.in\>/configure\1.ac/g' * syntax-checks.mk (sc_tests_no_configure_in): New syntax check. (syntax_check_rules): Add it. * tests/defs: Create stub for autoconf input in 'configure.ac', not in 'configure.in'. Adjust comments. ($AUTOCONF, $AUTOHEADER, $AUTORECONF): Remove workaround for the infamous debian autoconf wrapper: we don't need such workaround anymore now that we name our autoconf input as 'configure.ac'. For more information, see commit v1.11-564-g63da492 "test defs: hack to support autoconf-wrapper programs" of 16-12-2011. * tests/README: Use 'configure.ac', not 'configure.in'. * Many many tests: Likewise. * tests/backcompat3.test: Adjust to avoid spurious failures. * tests/backcompat5.test: Likewise. * tests/missing6.test: Likewise. * tests/backcompat6.test: Likewise, and extend a bit since we are at it.
Stefano Lattarini 641a5a4b 2012-02-16T10:46:23 maint: run "make update-copyright"
Stefano Lattarini 5012480b 2011-11-03T15:39:02 Merge branch 'master' into testsuite-work Commits merged from master: - tests: various minor tweakings, mostly related to AM_PROG_AR - maint-mode: fix botched configure messages - fix: regenerate Makefiles - tests: few improvements to some `ar-lib' related tests - info: allow user to inhibit creation/update of '${infodir}/dir' - warnings: new 'extra-portability' category, for AM_PROG_AR - ar-lib: new 'AM_PROG_AR' macro, triggering the 'ar-lib' script Extra testsuite adjustments: * tests/instspc.tap: Adjust to new portability requirements due to the new AM_PROG_AR macro. * tests/lex-lib.test: Likewise. * tests/extra-portability2.test: Use `$am_original_AUTOMAKE' instead of the obsolete `$original_AUTOMAKE'. * tests/list-of-tests.mk: Update.
Stefano Lattarini 38e1b39d 2011-11-03T13:50:06 Merge branch 'msvc' into master Commits merged from msvc: - tests: few improvements to some `ar-lib' related tests - warnings: new 'extra-portability' category, for AM_PROG_AR - ar-lib: new 'AM_PROG_AR' macro, triggering the 'ar-lib' script Extra changes required by the testsuite: * tests/instspc-tests.sh: Adjust to new portability requirements due to the new AM_PROG_AR macro. * tests/libobj-basic.test: Likewise. * tests/libobj2.test: Likewise. * tests/libobj15a.test: Likewise. * tests/libobj15b.test: Likewise. * tests/libobj15c.test: Likewise. * tests/libobj16a.test: Likewise. * tests/libobj16b.test: Likewise. * tests/libobj17.test: Likewise. * tests/libobj18.test: Likewise. * tests/libobj19.test: Likewise. * tests/libobj20a.test: Likewise. * tests/libobj20b.test: Likewise. * tests/libobj20c.test: Likewise. * tests/canon6.test: Likewise. * tests/canon6.test: Likewise. * tests/canon7.tests: Likewise. * tests/extra9.test: Likewise. * tests/extradep.test: Likewise. * tests/extradep2.test: Likewise. * tests/posixsubst-ldadd.test: Likewise. * tests/posixsubst-libraries.test: Likewise. * tests/posixsubst-ltlibraries.test: Likewise. * tests/python-virtualenv.test: Likewise. * tests/vartypos.test: Likewise. * tests/vartypo2.test: Likewise. * tests/suffix.test: Update to take into account previous master-only changes. * tests/suffix2.test: Likewise. * tests/libobj7.test: Call automake with the `--add-missing' option, instead of creating a dummy `ar-lib' file, since this test now also runs "./configure" and "make". * tests/suffix5.test: Copy the real `ar-lib' script file, instead of creating a dummy one, since this test now also runs "./configure" and "make". * tests/extra-portability2.test: Fix this test not to rely on the older, faulty semantics of "strictness specification always reset warning level", which has been fixed in commit v1.11-623-g1609491 (see also automake bug#7669 a.k.a. PR/547). Since we are at it, throw inf few other minor unrelated improvements. * tests/extra-portability.test: Explicitly pass `-Wall' to automake calls, for clarity.
Peter Rosin c7a6a92e 2011-10-21T00:23:34 ar-lib: new 'AM_PROG_AR' macro, triggering the 'ar-lib' script * m4/ar-lib.m4: New macro AM_PROG_AR, which locates an archiver and triggers the auxiliary 'ar-lib' script if needed. * m4/Makefile.am (dist_m4data_DATA): Update. * automake.in ($seen_ar): New variable. (scan_autoconf_traces): Set it. (handle_libraries, handle_ltlibraries): Require AM_PROG_AR for portability. * doc/automake.texi (Public Macros): Mention the new 'AM_PROG_AR' macro. (Subpackages): Add AM_PROG_AR to the example. (A Library): Adjust recommendations for AR given the new AM_PROG_AR macro. * All relevant tests: Adjust to new portability requirements due to the new AM_PROG_AR macro. * tests/ar-lib2.test: New test, checking that AM_PROG_AR triggers install of ar-lib. * tests/ar-lib3.test: New test, checking that lib_LIBRARIES requires AM_PROG_AR. * tests/ar-lib4.test: New test, checking that lib_LTLIBRARIES requires AM_PROG_AR. * tests/ar-lib5a.test: New test, checking that AM_PROG_AR triggers use of ar-lib when the archiver is Microsoft lib. * tests/ar-lib5b.test: New test, checking that AM_PROG_AR triggers use of ar-lib when the archiver is a faked lib. * tests/ar-lib6a.test: New test, checking the ordering of AM_PROG_AR and LT_INIT. * tests/ar-lib6b.test: New test, checking the ordering of AM_PROG_AR and AC_PROG_LIBTOOL. * tests/ar-lib7.test: New test, checking that automake warns if ar-lib is missing. * tests/ar3.test: New test, checking that AR and ARFLAGS may be overridden by the user even if AM_PROG_AR is used. * tests/ar4.test: New test, checking that AM_PROG_AR bails out if it cannot determine the archiver interface. * tests/ar5.test: New test, checking that AM_PROG_AR runs its optional argument if it cannot determine the archiver interface. * tests/defs.in: New required entry 'lib'. * tests/Makefile.am (TESTS): Update. * NEWS: Update. Signed-off-by: Peter Rosin <peda@lysator.liu.se>
Stefano Lattarini 0ea1177e 2011-07-16T00:19:56 tests: fix typos, grammaros and other blunders in comments
Stefano Lattarini 79103003 2011-01-08T19:40:04 tests: enable 'errexit' shell flag by default. * tests/defs: Enable `errexit' shell flag (near the end). Removed redundant comment about the enabling of shell traces. * tests/README (Writing test cases): Update, and use nicer formatting in a couple of places. * All tests: Adjusted by removing now-redundant calls to 'set -e'.
Stefano Lattarini c92e890c 2010-06-27T16:34:42 Modernize, improve and extend tests `subobj*.test'. * tests/subobjname.test: Add trailing `:' command. * tests/subobj.test: Make grepping of `Makefile.in' stricter. Escape literal dots in grep regexps. * tests/subobj2.test: Add trailing `:' command. Do not use the unportable fgrep option `-e'. * tests/subobj3.test: Add trailing `:' command. (configure.in): Use proper m4 quoting, and avoid obsolescent constructs. * tests/subobj8.test: Likewise. Also, enable `errexit' shell flag, with related changes * tests/subobj4.test: Likewise. Also, make grepping of `Makefile.in' stricter. * tests/subobj5.test: Add trailing `:' command. Move setting of `errexit' shell flag earlier in the script (just after inclusion of ./defs). (configure.in): Use the stub created by `./defs', rather than writing it from scratch, and avoid obsolescent constructs. * tests/subobj6.test: Add trailing `:' command. Move setting of `errexit' shell flag earlier in the script (just after inclusion of ./defs). Do not create useless dummy ac-init file `f'. * tests/subobj7.test: Do not create useless dummy ac-init file `f'. (configure.in): Use the stub created by `./defs', rather than writing it from scratch, and avoid obsolescent constructs. * tests/subobj9.test: Move setting of `errexit' shell flag earlier in the script (just after inclusion of ./defs). Fail the test if `make distcheck' fails. Ensure verbose printing of captured make stdout. Avoid uselsss fork by doing simple grep instead of using test -n "`COMMAND | grep ...`". (configure.in): Normalize the call to AC_INIT w.r.t. other tests. (Makefile.am): Explicitly mark target "print" as phony. * tests/subobj10.test: Removed duplicated call to `set -e'. Add trailing `:' command. (configure.in): Normalize the call to AC_INIT w.r.t. other tests.
Stefano Lattarini 76d8a53e 2010-06-25T17:19:44 Tests: remove useless repetitions of `foreign' automake option. * tests/multlib.test (configure.in): Remove useless use of `foreign' option in AM_INIT_AUTOMAKE (the `--foreign' option is already in $AUTOMAKE by default, so no point in repeating it). * tests/subobj10.test: Likewise. * tests/subobj9.test: Likewise. * tests/lex3.test (Makefile.am): Similarly, remove useless use of `foreign' option in AUTOMAKE_OPTIONS. * tests/lex5.test: Likewise. * tests/pr279.test: Likewise. * tests/pr279-2.test: Likewise. * tests/specflg3.test: Likewise. * tests/target-cflags.test: Likewise. Signed-off-by: Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
Ralf Wildenhues fcf2f560 2009-05-17T15:32:40 Revert Automake license to GPLv2+. Automake will move to GPLv3+ once the Exception statement has been rewritten to use the new GPLv3 exception language. This change does not impact the COPYING file that may be installed by `automake --add-missing'. * COPYING: Revert to GPLv2. All uses changed. * NEWS: Update. Signed-off-by: Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
Ralf Wildenhues 20594c08 2008-09-06T19:20:32 Use `Exit' instead of `exit' in test suite. Cater to Bourne shells like Solaris sh that do not pass the `exit' argument as status to the cleanup trap. * Makefile.am (maintainer-check): Check that here-documents use only `END' or `EOF' as delimiter in the test suite. Check that, outside of here-documents, the tests do not use `exit' with an argument, but use `Exit' instead. * tests/defs.in (Exit): New function. Use it throughout, starting with the introduction of the exit trap. * tests/*.test: Use `Exit $arg' instead of `exit $arg' throughout, except inside created files. Signed-off-by: Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
Ralf Wildenhues e3acdefa 2007-12-08T11:20:24 Reword the copyright notices to match what's suggested in GPLv3.
Ralf Wildenhues b9ff055d 2007-07-07T11:23:29 * COPYING, lib/COPYING: Update to GPLv3. All uses changed. * NEWS: Update.
Ralf Wildenhues 962c528e 2006-10-14T17:26:43 For PR automake/492. * automake.in (output_flag): Set to `-o' for Assembler and preprocessed Assembler, assuming that all understand `-c -o'. * THANKS, NEWS: Update. * tests/subobj10.test: New test. * tests/Makefile.am: Update. Report by Thomas Schwinge.