kmx git

Commit	Date	Message
74017b56	2013-05-16T12:18:43	tests: remove exec bit from all of them ('micro' branch) It gives the impression that they are directly runnable, as with "./t/foo.sh", but it has been a while since that was the case. Today, tests are runnable only through "make check" or "./runtest". This change is for the 'micro' branch (automake 1.13.2a). It will soon be followed by similar patches for the 'maint' branch (automake 1.13a) and the 'master' branch (automake 1.99a). * t/.sh, t/.tap: Remove executable bit. * maint.mk (sc_tests_executable): Remove. (syntax_check_rules): Adjust. * gen-testsuite-part: Set permissions of generated tests to '444' (-r--r--r--), rather than 555 (-r-xr-xr-x). Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
7df8b28c	2012-12-31T18:18:37	maint: update copyright year for 2013 (in branch maint) Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
5ddf1007	2012-10-27T16:41:39	tests: prefer including 'test-init.sh' rather than './defs' This is a follow-up to today's commit v1.12.4-22-g0610fc8, "tests: prepare to move ./defs to t/ax/test-init.sh" * All tests: To run the common setup, use the command: . test-init.sh instead of the older, "historical" one: . ./defs \|\| exit 1 Note that the "\|\| exit 1" wasn't really useful, since the 'errexit' shell flag is in effect in both './defs' and 'test-init.sh', and all the known shells that are good enough to run the automake testsuite do automatically exit with error when a sourced file cannot be found (at least, they do so in non-interactive mode, which is the only mode that concerns us in the testsuite). * t/ax/tap-summary-aux.sh, t/ax/testsuite-summary-checks.sh: Likewise. * gen-testsuite-part: Do the same in the generated tests. Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
df23dafc	2012-10-22T16:14:49	compat: reinstate AM_PROG_MKDIR_P, for gettext Do not remove AM_PROG_MKDIR_P just yet. gettext (latest from git) still AC_REQUIRE's AM_PROG_MKDIR_P via its intl.m4 and po.m4 files, which are pulled into many projects. When I try to build one of those projects (coreutils) using the latest from automake.git/master, I see this failure: $ aclocal -I m4 configure.ac:477: warning: AM_PROG_MKDIR_P is m4_require'd \ but not m4_defun'd m4/po.m4:23: AM_PO_SUBDIRS is expanded from... m4/gettext.m4:57: AM_GNU_GETTEXT is expanded from... configure.ac:477: the top level That is because AM_PROG_MKDIR_P was removed (via commit v1.12-20-g8a1c64f) in preparation for the next release of automake. * NEWS: Remove the paragraph that announced the removal of AM_PROG_MKDIR_P. * Makefile.am (dist_automake_ac_DATA): Add m4/mkdirp.m4. * m4/mkdirp.m4: Re-add file. * t/mkdirp-deprecation.sh: Likewise. * t/list-of-tests.mk: Add it. * automake.in: Restore removed code, and adjust comments, s/1.13/1.14/ to reflect new plan for removal. * doc/automake.texi (Obsolete Macros): Restore the section, but now with only one entry: the one for AM_PROG_MKDIR_P.
154fedbd	2012-09-12T17:31:24	fix typos in mk-dirp.m4 * t/gettext-macros.sh: Fix typo in name of macro emitted into mk-dirp.m4: s/AM_MKDIR_P/AM_PROG_MKDIR_P/, and as Stefano Lattarini noted, also fix this typo: s/AC_MKDIR_P/AC_PROG_MKDIR_P/.
b21d6869	2012-06-28T13:27:49	Merge branch 'maint' * maint: tests: simpler workaround for shells losing the exit status in exit trap + Extra non-trivial edits: * Several tests: Adjusted to use 'exit' rather than 'Exit'. Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
c2a52bf0	2012-06-24T10:36:15	tests: simpler workaround for shells losing the exit status in exit trap Now that we can assume our tests are run by a decent POSIX shell, we can simplify our workaround aimed at having the exit status propagated correctly to the code in the exit trap. Unfortunately, we cannot dispense with such a workaround altogether, because it's still required by some shells we need to support (at least Solaris 10 /bin/ksh and /usr/xpg4/bin/sh). For more information about the need of that workaround, see the entry about 'trap' in the section "Limitations of Shell Builtins" in the Autoconf manual: <http://www.gnu.org/software/autoconf/manual/autoconf.html#trap> The new workaround has been tested successfully with the following shells: - Bash 4.1 - Bash 3.2 - Bash 3.0 - Bash 2.05b - dash 0.5.5.1 - dash 0.5.2 - AT&T Ksh 93u (from official Debian package) - MirBSD Korn Shell 40.2 (from official Debian package) - Solaris 9, 10 and 11 /bin/ksh - Solaris 9, 10 and 11 /usr/xpg4/bin/sh - NetBSD 5.1 /bin/sh - NetBSD 5.1 /bin/ksh * t/ax/test-init.sh (Exit): Rename ... (_am_exit): ... like this. (exit): New alias for '_am_exit'. We cannot simply redefine 'exit' as a shell function, because some shells (dash 0.5.5.1, Solaris 10 /bin/ksh and /usr/xpg4/bin/sh) do not allow it. (_am_exit, trap): Add extra escaping for 'exit' calls, to ensure we really invoke the 'exit' builtin and not our alias with the same name. * configure.ac: Check that the shell selected to run our testsuite supports aliases named like shell builtins. * t/REAMDE: Adjust. * All tests: Adjust, by simply using 'exit' instead of 'Exit'. * t/self-check-explicit-skips.sh: Adjust: the first usage of 'exit' after it has been redefined as an alias must be on a new line w.r.t. that where the alias is defined, in order for the redefinition to be honored. * syntax-checks.mk (sc_tests_Exit_not_exit): Delete. (sc_tests_exit_not_Exit): New. (syntax_check_rules): Adjust. (sc_tests_automake_fails): Simplify the recipe a little. * Several tests: Remove now useless spurious quoting once required to placate the 'sc_tests_Exit_not_exit' maintainer check. * gen-testsuite-part: Likewise. Also, avoid uses of 'Exit' in the generated scripts. Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
062aeb24	2012-06-22T14:52:21	Merge branch 'maint' * maint: tests: automatic re-execution works for non-POSIX shells too tests: use more POSIX shell features our test scripts + Extra non-trivial edits: * t/ax/test-init.sh: Apply the diffs between past versions of 'defs' in maint and in master; i.e., remove handling of $required entries 'texi2dvi-o' and 'makeinfo-html', and adjust to the fact that the parallel testsuite harness is now the default. Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
6e713425	2012-06-14T13:13:58	tests: use more POSIX shell features our test scripts Since commit 'v1.12-36-g2d68fd9' of 2012-05-07, "configure: search a sturdy POSIX shell to be used in the testsuite", the shell running our test script is assured to be a POSIX-conforming shell, so we can use the more modern and flexible idioms and features that we couldn't use when we also aimed at compatibility with non-POSIX Bourne shells, like Solaris /bin/sh. * t/README: Suggest to use POSIX shell features liberally in test cases, with possible exception of Makefile recipes and configure shell code. * Several tests: Adjust to use more POSIX shell features; e.g., $(...) rather than `...`, $((...)) rather than `expr ...`, "if ! CMD; then ..." instead of "if CMD; then :; else ...", and so on. In several places, when using the 'test' built-in, prefer '-eq' over '=' for numeric comparisons, and prefer "grep -c PATTERN FILE" over "grep PATTERN FILE \| wc -l". Throw in other low-hanging easy improvements and fixlets while we are at it. * t/ax/depcomp.sh, t/ax/tap-summary-aux.sh, t/ax/tap-functions.sh, defs, defs-static.in: Likewise. Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
8a1c64fe	2012-04-06T11:24:11	AM_PROG_MKDIR_P: remove as obsolete Support for the obsolescent 'AM_PROG_MKDIR_P' m4 macro (and its output variable '$(mkdir_p)') has in the documentation and with runtime warning since Automake 1.12.1. It's now time to remove it. * automake.in (scan_autoconf_traces): Remove special handling of 'AM_PROG_MKDIR_P'. * m4/mkdirp.m4: Delete. * Makefile.am (dist_automake_ac_DATA): Remove it. * t/mkdirp-deprecation.sh: Delete. * t/list-of-tests.mk: Remove it. * doc/automake.texi: Remove references to the 'AM_MKDIR_P' m4 macro and the '$(mkdir_p)' output variable. * t/gettext-macros.sh: Ensure the gettext-requiring tests will still see the now-removed 'AM_PROG_MKDIR_P' macro as an alias for the 'AC_PROG_MKDIR_P' macro, since even recent versions of gettext uses 'AM_PROG_MKDIR_P' in their '.m4' files. * NEWS: Update. Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
7a1eb9ff	2012-04-02T17:05:42	AM_PROG_MKDIR_P: deprecate, to be removed in Automake 1.13 Support for the obsolescent 'AM_PROG_MKDIR_P' macro (and its output variable '$(mkdir_p)') has already been deprecated in the documentation. It's now time to make its use actively emit warnings in the 'obsolete' category as well. * automake.in (scan_autoconf_traces): Warn about 'AM_PROG_MKDIR_P' obsolescent if that macro is seen. * m4/mkdirp.m4 (AM_PROG_MKDIR_P): Warn about its own obsolescence. * m4/init.m4: Require 'AC_PROG_MKDIR_P', not 'AM_PROG_MKDIR_P'. * t/mkdirp-deprecation.sh: New test. * t/list-of-tests.mk: Add it. * syntax-check.mk (sc_mkdir_p): Delete this check as obsolete. (syntax_check_rules): Remove it. * t/gettext-macros.sh: Ensure the gettext-requiring tests will call aclocal and automake with the 'obsolete' warnings disabled, since even recent versions of gettext used the now-deprecated 'AM_PROG_MKDIR_P' m4 macro. * NEWS: Update. Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
b35dca6b	2012-04-11T20:38:39	maintcheck: avoid yet more spurious failures (1) The 'sc_tests_makefile_variable_order' maintainer check is too strict sometimes, blaming automake for outputting out-of-order variables when this is in fact due to the result of post-processing of third-party tools or custom test code. * t/tap-doc2.sh: Ensure the final Makefile.in (that we hack by hand) is removed, to avoid a spurious maintainer-check failure. * t/gettext-macros.sh: Ensure that any leftover Makefile.in (that is generated by gettext/autopoint) is removed, to avoid a spurious maintainer-check failure. Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
8a5096d1	2012-04-06T13:12:25	tests: rename 'tests/' => 't/', '.test' => '.sh' When we (soon) convert the Automake testsuite to a non-recursive make setup, we'll have to fix the entries of $(TESTS) to be prepended with the subdirectory they are in; this will increase the length of $(TESTS), and thus increase the possibility of exceeding the command-line length limits on some systems (most notably, MinGW/MSYS). See automake bug#7868 for more information. Thus we rename the 'tests/' subdirectory to 't/', and each 'x.test' script in there to 'x.sh'; this way, the $(TESTS) entry 'foo.test' will become 't/foo.sh', which have the same number of characters. * tests/: Rename ... * t/: ... to this. * t/.test: Rename ... t/.sh: ... to this. t/.gitignore: Removed as obsolete. * t/defs: Adjust. * t/gen-testsuite-part: Likewise. * t/list-of-tests.mk: Likewise. * t/ccnoco.sh: Likewise. * t/ccnoco3.sh: Likewise. * t/self-check-cleanup.tap: Likewise. * t/self-check-dir.tap: Likewise. * t/self-check-me.tap: Likewise. * t/self-check-reexec.tap: Likewise. * README: Likewise. * bootstrap: Likewise * configure.ac: Likewise. * Makefile.am: Likewise. * .gitignore: Likewise. * syntax-check.mk: Likewise. Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>

74017b56

2013-05-16T12:18:43

tests: remove exec bit from all of them ('micro' branch) It gives the impression that they are directly runnable, as with "./t/foo.sh", but it has been a while since that was the case. Today, tests are runnable only through "make check" or "./runtest". This change is for the 'micro' branch (automake 1.13.2a). It will soon be followed by similar patches for the 'maint' branch (automake 1.13a) and the 'master' branch (automake 1.99a). * t/*.sh, t/*.tap: Remove executable bit. * maint.mk (sc_tests_executable): Remove. (syntax_check_rules): Adjust. * gen-testsuite-part: Set permissions of generated tests to '444' (-r--r--r--), rather than 555 (-r-xr-xr-x). Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>

7df8b28c

2012-12-31T18:18:37

maint: update copyright year for 2013 (in branch maint) Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>

5ddf1007

2012-10-27T16:41:39

tests: prefer including 'test-init.sh' rather than './defs' This is a follow-up to today's commit v1.12.4-22-g0610fc8, "tests: prepare to move ./defs to t/ax/test-init.sh" * All tests: To run the common setup, use the command: . test-init.sh instead of the older, "historical" one: . ./defs || exit 1 Note that the "|| exit 1" wasn't really useful, since the 'errexit' shell flag is in effect in both './defs' and 'test-init.sh', and all the known shells that are good enough to run the automake testsuite do automatically exit with error when a sourced file cannot be found (at least, they do so in non-interactive mode, which is the only mode that concerns us in the testsuite). * t/ax/tap-summary-aux.sh, t/ax/testsuite-summary-checks.sh: Likewise. * gen-testsuite-part: Do the same in the generated tests. Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>

df23dafc

2012-10-22T16:14:49

compat: reinstate AM_PROG_MKDIR_P, for gettext Do not remove AM_PROG_MKDIR_P just yet. gettext (latest from git) still AC_REQUIRE's AM_PROG_MKDIR_P via its intl.m4 and po.m4 files, which are pulled into *many* projects. When I try to build one of those projects (coreutils) using the latest from automake.git/master, I see this failure: $ aclocal -I m4 configure.ac:477: warning: AM_PROG_MKDIR_P is m4_require'd \ but not m4_defun'd m4/po.m4:23: AM_PO_SUBDIRS is expanded from... m4/gettext.m4:57: AM_GNU_GETTEXT is expanded from... configure.ac:477: the top level That is because AM_PROG_MKDIR_P was removed (via commit v1.12-20-g8a1c64f) in preparation for the next release of automake. * NEWS: Remove the paragraph that announced the removal of AM_PROG_MKDIR_P. * Makefile.am (dist_automake_ac_DATA): Add m4/mkdirp.m4. * m4/mkdirp.m4: Re-add file. * t/mkdirp-deprecation.sh: Likewise. * t/list-of-tests.mk: Add it. * automake.in: Restore removed code, and adjust comments, s/1.13/1.14/ to reflect new plan for removal. * doc/automake.texi (Obsolete Macros): Restore the section, but now with only one entry: the one for AM_PROG_MKDIR_P.

154fedbd

2012-09-12T17:31:24

fix typos in mk-dirp.m4 * t/gettext-macros.sh: Fix typo in name of macro emitted into mk-dirp.m4: s/AM_MKDIR_P/AM_PROG_MKDIR_P/, and as Stefano Lattarini noted, also fix this typo: s/AC_MKDIR_P/AC_PROG_MKDIR_P/.

b21d6869

2012-06-28T13:27:49

Merge branch 'maint' * maint: tests: simpler workaround for shells losing the exit status in exit trap + Extra non-trivial edits: * Several tests: Adjusted to use 'exit' rather than 'Exit'. Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>

c2a52bf0

2012-06-24T10:36:15

tests: simpler workaround for shells losing the exit status in exit trap Now that we can assume our tests are run by a decent POSIX shell, we can simplify our workaround aimed at having the exit status propagated correctly to the code in the exit trap. Unfortunately, we cannot dispense with such a workaround altogether, because it's still required by some shells we need to support (at least Solaris 10 /bin/ksh and /usr/xpg4/bin/sh). For more information about the need of that workaround, see the entry about 'trap' in the section "Limitations of Shell Builtins" in the Autoconf manual: <http://www.gnu.org/software/autoconf/manual/autoconf.html#trap> The new workaround has been tested successfully with the following shells: - Bash 4.1 - Bash 3.2 - Bash 3.0 - Bash 2.05b - dash 0.5.5.1 - dash 0.5.2 - AT&T Ksh 93u (from official Debian package) - MirBSD Korn Shell 40.2 (from official Debian package) - Solaris 9, 10 and 11 /bin/ksh - Solaris 9, 10 and 11 /usr/xpg4/bin/sh - NetBSD 5.1 /bin/sh - NetBSD 5.1 /bin/ksh * t/ax/test-init.sh (Exit): Rename ... (_am_exit): ... like this. (exit): New alias for '_am_exit'. We cannot simply redefine 'exit' as a shell function, because some shells (dash 0.5.5.1, Solaris 10 /bin/ksh and /usr/xpg4/bin/sh) do not allow it. (_am_exit, trap): Add extra escaping for 'exit' calls, to ensure we really invoke the 'exit' builtin and not our alias with the same name. * configure.ac: Check that the shell selected to run our testsuite supports aliases named like shell builtins. * t/REAMDE: Adjust. * All tests: Adjust, by simply using 'exit' instead of 'Exit'. * t/self-check-explicit-skips.sh: Adjust: the first usage of 'exit' after it has been redefined as an alias must be on a new line w.r.t. that where the alias is defined, in order for the redefinition to be honored. * syntax-checks.mk (sc_tests_Exit_not_exit): Delete. (sc_tests_exit_not_Exit): New. (syntax_check_rules): Adjust. (sc_tests_automake_fails): Simplify the recipe a little. * Several tests: Remove now useless spurious quoting once required to placate the 'sc_tests_Exit_not_exit' maintainer check. * gen-testsuite-part: Likewise. Also, avoid uses of 'Exit' in the generated scripts. Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>

062aeb24

2012-06-22T14:52:21

Merge branch 'maint' * maint: tests: automatic re-execution works for non-POSIX shells too tests: use more POSIX shell features our test scripts + Extra non-trivial edits: * t/ax/test-init.sh: Apply the diffs between past versions of 'defs' in maint and in master; i.e., remove handling of $required entries 'texi2dvi-o' and 'makeinfo-html', and adjust to the fact that the parallel testsuite harness is now the default. Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>

6e713425

2012-06-14T13:13:58

tests: use more POSIX shell features our test scripts Since commit 'v1.12-36-g2d68fd9' of 2012-05-07, "configure: search a sturdy POSIX shell to be used in the testsuite", the shell running our test script is assured to be a POSIX-conforming shell, so we can use the more modern and flexible idioms and features that we couldn't use when we also aimed at compatibility with non-POSIX Bourne shells, like Solaris /bin/sh. * t/README: Suggest to use POSIX shell features liberally in test cases, with possible exception of Makefile recipes and configure shell code. * Several tests: Adjust to use more POSIX shell features; e.g., $(...) rather than `...`, $((...)) rather than `expr ...`, "if ! CMD; then ..." instead of "if CMD; then :; else ...", and so on. In several places, when using the 'test' built-in, prefer '-eq' over '=' for numeric comparisons, and prefer "grep -c PATTERN FILE" over "grep PATTERN FILE | wc -l". Throw in other low-hanging easy improvements and fixlets while we are at it. * t/ax/depcomp.sh, t/ax/tap-summary-aux.sh, t/ax/tap-functions.sh, defs, defs-static.in: Likewise. Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>

8a1c64fe

2012-04-06T11:24:11

AM_PROG_MKDIR_P: remove as obsolete Support for the obsolescent 'AM_PROG_MKDIR_P' m4 macro (and its output variable '$(mkdir_p)') has in the documentation and with runtime warning since Automake 1.12.1. It's now time to remove it. * automake.in (scan_autoconf_traces): Remove special handling of 'AM_PROG_MKDIR_P'. * m4/mkdirp.m4: Delete. * Makefile.am (dist_automake_ac_DATA): Remove it. * t/mkdirp-deprecation.sh: Delete. * t/list-of-tests.mk: Remove it. * doc/automake.texi: Remove references to the 'AM_MKDIR_P' m4 macro and the '$(mkdir_p)' output variable. * t/gettext-macros.sh: Ensure the gettext-requiring tests will still see the now-removed 'AM_PROG_MKDIR_P' macro as an alias for the 'AC_PROG_MKDIR_P' macro, since even recent versions of gettext uses 'AM_PROG_MKDIR_P' in their '.m4' files. * NEWS: Update. Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>

7a1eb9ff

2012-04-02T17:05:42

AM_PROG_MKDIR_P: deprecate, to be removed in Automake 1.13 Support for the obsolescent 'AM_PROG_MKDIR_P' macro (and its output variable '$(mkdir_p)') has already been deprecated in the documentation. It's now time to make its use actively emit warnings in the 'obsolete' category as well. * automake.in (scan_autoconf_traces): Warn about 'AM_PROG_MKDIR_P' obsolescent if that macro is seen. * m4/mkdirp.m4 (AM_PROG_MKDIR_P): Warn about its own obsolescence. * m4/init.m4: Require 'AC_PROG_MKDIR_P', not 'AM_PROG_MKDIR_P'. * t/mkdirp-deprecation.sh: New test. * t/list-of-tests.mk: Add it. * syntax-check.mk (sc_mkdir_p): Delete this check as obsolete. (syntax_check_rules): Remove it. * t/gettext-macros.sh: Ensure the gettext-requiring tests will call aclocal and automake with the 'obsolete' warnings disabled, since even recent versions of gettext used the now-deprecated 'AM_PROG_MKDIR_P' m4 macro. * NEWS: Update. Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>

b35dca6b

2012-04-11T20:38:39

maintcheck: avoid yet more spurious failures (1) The 'sc_tests_makefile_variable_order' maintainer check is too strict sometimes, blaming automake for outputting out-of-order variables when this is in fact due to the result of post-processing of third-party tools or custom test code. * t/tap-doc2.sh: Ensure the final Makefile.in (that we hack by hand) is removed, to avoid a spurious maintainer-check failure. * t/gettext-macros.sh: Ensure that any leftover Makefile.in (that is generated by gettext/autopoint) is removed, to avoid a spurious maintainer-check failure. Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>

8a5096d1

2012-04-06T13:12:25

tests: rename 'tests/' => 't/', '*.test' => '*.sh' When we (soon) convert the Automake testsuite to a non-recursive make setup, we'll have to fix the entries of $(TESTS) to be prepended with the subdirectory they are in; this will increase the length of $(TESTS), and thus increase the possibility of exceeding the command-line length limits on some systems (most notably, MinGW/MSYS). See automake bug#7868 for more information. Thus we rename the 'tests/' subdirectory to 't/', and each 'x.test' script in there to 'x.sh'; this way, the $(TESTS) entry 'foo.test' will become 't/foo.sh', which have the same number of characters. * tests/: Rename ... * t/: ... to this. * t/*.test: Rename ... * t/*.sh: ... to this. * t/.gitignore: Removed as obsolete. * t/defs: Adjust. * t/gen-testsuite-part: Likewise. * t/list-of-tests.mk: Likewise. * t/ccnoco.sh: Likewise. * t/ccnoco3.sh: Likewise. * t/self-check-cleanup.tap: Likewise. * t/self-check-dir.tap: Likewise. * t/self-check-me.tap: Likewise. * t/self-check-reexec.tap: Likewise. * README: Likewise. * bootstrap: Likewise * configure.ac: Likewise. * Makefile.am: Likewise. * .gitignore: Likewise. * syntax-check.mk: Likewise. Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>

kc3-lang/automake/t/gettext-macros.sh

t/gettext-macros.sh

Log