|
db973eaa
|
2012-02-21T19:47:36
|
|
tests: prefer 'configure.ac' over 'configure.in'
With this change, our testsuite now uses 'configure.ac' as the
name for the typical autoconf input, instead of the obsolescent
'configure.in' (which has been deprecated for several years, at
least since autoconf 2.50).
Most of the test cases changed by this commit have been
automatically modified with this sed command (using GNU
sed):
sed -i 's/\<configure\(\\\?\)\.in\>/configure\1.ac/g'
* syntax-checks.mk (sc_tests_no_configure_in): New syntax check.
(syntax_check_rules): Add it.
* tests/defs: Create stub for autoconf input in 'configure.ac',
not in 'configure.in'. Adjust comments.
($AUTOCONF, $AUTOHEADER, $AUTORECONF): Remove workaround for the
infamous debian autoconf wrapper: we don't need such workaround
anymore now that we name our autoconf input as 'configure.ac'.
For more information, see commit v1.11-564-g63da492 "test defs:
hack to support autoconf-wrapper programs" of 16-12-2011.
* tests/README: Use 'configure.ac', not 'configure.in'.
* Many many tests: Likewise.
* tests/backcompat3.test: Adjust to avoid spurious failures.
* tests/backcompat5.test: Likewise.
* tests/missing6.test: Likewise.
* tests/backcompat6.test: Likewise, and extend a bit since we
are at it.
|
|
|
641a5a4b
|
2012-02-16T10:46:23
|
|
maint: run "make update-copyright"
|
|
|
7a7fc565
|
2011-05-23T21:53:44
|
|
testsuite: require C compiler explicitly in tests needing it
The list of the test scripts which needed a C compiler but
failed to require it explicitly has been found by running:
$ am_explicit_skips=yes CC=false make check
and looking for tests that reported FAIL instead of SKIP.
After the present change, all those previously failing tests
either pass or get correctly skipped.
* tests/aclocal4.test ($required): Add `cc'.
* tests/ansi.test: Likewise.
* tests/ansi10.test: Likewise.
* tests/ansi3.test: Likewise.
* tests/ansi3b.test: Likewise.
* tests/ansi5.test: Likewise.
* tests/ansi6.test: Likewise.
* tests/ansi7.test: Likewise.
* tests/ansi9.test: Likewise.
* tests/backcompat6.test: Likewise.
* tests/canon7.test: Likewise.
* tests/check5.test: Likewise.
* tests/check7.test: Likewise.
* tests/check8.test: Likewise.
* tests/cond4.test: Likewise.
* tests/cond11.test: Likewise.
* tests/cond16.test: Likewise.
* tests/cond18.test: Likewise.
* tests/cond19.test: Likewise.
* tests/cond22.test: Likewise.
* tests/cond30.test: Likewise.
* tests/cond31.test: Likewise.
* tests/cond32.test: Likewise.
* tests/cond34.test: Likewise.
* tests/cond35.test: Likewise.
* tests/cond39.test: Likewise.
* tests/condd.test: Likewise.
* tests/cygnus-dependency-tracking.test: Likewise.
* tests/depcomp2.test: Likewise.
* tests/depcomp6.test: Likewise.
* tests/depcomp7.test: Likewise.
* tests/depcomp8a.test: Likewise.
* tests/depcomp8b.test: Likewise.
* tests/depdist.test: Likewise.
* tests/depend2.test: Likewise.
* tests/depend5.test: Likewise.
* tests/distcleancheck.test: Likewise.
* tests/distname.test: Likewise.
* tests/exeext.test: Likewise.
* tests/exeext4.test: Likewise.
* tests/extradep.test: Likewise.
* tests/extradep2.test: Likewise.
* tests/gnits2.test: Likewise.
* tests/gnits3.test: Likewise.
* tests/instdir-ltlib.test: Likewise.
* tests/instdir-prog.test: Likewise.
* tests/instfail.test: Likewise.
* tests/instfail-libtool.test: Likewise.
* tests/lex3.test: Likewise.
* tests/lex5.test: Likewise.
* tests/lexvpath.test: Likewise.
* tests/lex-subobj-nodep.test: Likewise.
* tests/lflags.test: Likewise.
* tests/libobj-basic.test: Likewise.
* tests/libobj2.test: Likewise.
* tests/libobj7.test: Likewise.
* tests/libobj10.test: Likewise.
* tests/libobj16a.test: Likewise.
* tests/libobj16b.test: Likewise.
* tests/libobj17.test: Likewise.
* tests/libobj19.test: Likewise.
* tests/libtool2.test: Likewise.
* tests/libtool3.test: Likewise.
* tests/libtool7.test: Likewise.
* tests/libtool9.test: Likewise.
* tests/libtoo10.test: Likewise.
* tests/libtoo11.test: Likewise.
* tests/ltcond.test: Likewise.
* tests/ltcond2.test: Likewise.
* tests/ltconv.test: Likewise.
* tests/ltinit.test: Likewise.
* tests/ltlibsrc.test: Likewise.
* tests/ltorder.test: Likewise.
* tests/nobase.test: Likewise.
* tests/nobase-libtool.test: Likewise.
* tests/mmodely.test: Likewise.
* tests/parallel-tests5.test: Likewise.
* tests/parallel-tests-suffix-prog.test: Likewise.
* tests/parallel-tests-ext-driver-prog.test: Likewise.
* tests/posixsubst-ldadd.test: Likewise.
* tests/posixsubst-libraries.test: Likewise.
* tests/posixsubst-ltlibraries.test: Likewise.
* tests/posixsubst-programs.test: Likewise.
* tests/posixsubst-sources.test: Likewise.
* tests/pr87.test: Likewise.
* tests/pr204.test: Likewise.
* tests/pr224.test: Likewise.
* tests/pr300-lib.test: Likewise.
* tests/pr300-ltlib.test: Likewise.
* tests/pr300-prog.test: Likewise.
* tests/pr401.test: Likewise.
* tests/pr401b.test: Likewise.
* tests/pr401c.test: Likewise.
* tests/remake-gnulib-add-acsubst.test: Likewise.
* tests/remake-gnulib-add-header.test: Likewise.
* tests/regex.test: Likewise.
* tests/repeated-options.test: Likewise.
* tests/silent.test: Likewise.
* tests/silent3.test: Likewise.
* tests/silent9.test: Likewise.
* tests/silent-lex-generic.test: Likewise.
* tests/silent-many-generic.test: Likewise.
* tests/silent-yacc-generic.test: Likewise.
* tests/specflg7.test: Likewise.
* tests/specflg9.test: Likewise.
* tests/specflg10.test: Likewise.
* tests/stdinc.test: Likewise.
* tests/strip.test: Likewise.
* tests/strip2.test: Likewise.
* tests/strip3.test: Likewise.
* tests/subdirbuiltsources.test: Likewise.
* tests/subobj3.test: Likewise.
* tests/subobj6.test: Likewise.
* tests/subobj11a.test: Likewise.
* tests/subpkg.test: Likewise.
* tests/subst2.test: Likewise.
* tests/subst3.test: Likewise.
* tests/substref.test: Likewise.
* tests/substre2.test: Likewise.
* tests/suffix5.test: Likewise.
* tests/suffix8.test: Likewise.
* tests/suffix10.test: Likewise.
* tests/suffix11.test: Likewise.
* tests/suffix12.test: Likewise.
* tests/suffix13.test: Likewise.
* tests/target-cflags.test: Likewise.
* tests/transform.test: Likewise.
* tests/transform2.test: Likewise.
* tests/yacc-basic.test: Likewise.
* tests/yacc-d-basic.test: Likewise.
* tests/yacc-clean.test: Likewise.
* tests/yacc-dist-nobuild.test: Likewise.
* tests/yacc-nodist.test: Likewise.
* tests/yaccvpath.test: Likewise.
* tests/yacc-d-vpath.test: Likewise.
* tests/yacc4.test: Likewise.
* tests/yacc7.test: Likewise.
* tests/yacc8.test: Likewise.
* tests/yaccdry.test: Likewise.
* tests/yflags-cmdline-override.test: Likewise.
* tests/yflags-force-override.test: Likewise.
* tests/python-virtualenv.test: Likewise. Also, improve skip
messages.
* tests/subobj5.test ($required): Add `cc'.
(Makefile.am): Set `AUTOMAKE_OPTIONS' to `subdir-objects', and
add new checking rules `test-build' and `test-distdir'.
Extend the test by building and examining the distdir, the
program, and the object files.
* tests/postproc.test ($required): Add `cc'.
Avoid the explicit `|| Exit $?' after call to configure, which
is now either redundant (e.g., when `am_explicit_skips' is
unset), or counter-productive (e.g., when `am_explicit_skips'
is set to "yes").
* tests/pr243.test: Likewise.
* tests/pr266.test: Likewise.
* tests/pr220.test: Simplify so that it doesn't require a
C compiler anymore.
* tests/subdir5.test: Likewise.
* tests/subdir8.test: Likewise.
* tests/lflags.test: Likewise.
* tests/yflags.test: Likewise.
* tests/yflags-force-conditional.test: Likewise.
* tests/lflags2.test: Simplify so that it doesn't require a
C++ compiler anymore.
* tests/yflags2.test: Likewise.
* tests/autohdrdry.test (configure.in): Remove unneeded call
to `AC_PROG_CC'.
* tests/pr287.test: Likewise.
* tests/check6.test: Likewise.
* tests/cond21.test: Likewise, plus some cosmetic adjustments.
* tests/upc.test: Skip if configure fails with status `77'.
* tests/upc3.test: Likewise.
* tests/vala4.test: Likewise.
* tests/nostdinc.test: Likewise. Also, make grepping checks
on `Makefile.in'. Update heading comments.
* tests/compile5.test: When we must skip, skip explicitly,
and with a meaningful message.
* tests/instspc-tests.sh: When running in "test-build" or
"test-install" mode (as determined by the value of variable
`$instspc_action'), require `cc'. Adjust comments.
* tests/depmod-tests.sh: Likewise.
|
|
|
e9e5d4ac
|
2011-05-15T16:33:01
|
|
tests: avoid spurious failures in cross-compile mode
* tests/depcomp2.test: Ensure verbose printing of captured stderr
from configure.
* tests/ansi3.test ($required): Add 'native', as the ansi2knr
functionality is not meant to work with a cross-compiler.
* tests/ansi3b.test: Likewise.
* tests/ansi5.test: Likewise.
* tests/ansi6.test: Likewise.
* tests/ansi7.test: Likewise.
* tests/ansi8.test: Likewise.
* tests/ansi10.test: Likewise.
* tests/subobj3.test: Likewise.
* tests/check8.test ($required): Add 'native', as this test is
not meant to work with a cross-compiler.
* tests/gnits2.test: Likewise.
* tests/ltconv.test: Likewise.
* tests/ltcond2.test: Likewise.
* tests/parallel-tests5.test: Likewise.
* tests/specflg7.test: Likewise.
* tests/specflg8.test: Likewise.
* tests/check5.test: Likewise. Also, ensure verbose printing of
captured make output, and thrown in few cosmetic and consistency
improvements.
* tests/ltinit.test: Be laxer in grepping configure output, to
avoid spurious failures on systems which lack POSIX dynamic
linking (e.g., MinGW), or when cross-compiling for such systems.
* tests/ansi9.test: Skip parts of the test that would require a
native compiler.
* tests/backcompat6.test: Likewise.
* tests/depcomp8a.test: Likewise.
* tests/pr401.test: Likewise.
* tests/pr401b.test: Likewise.
* tests/pr401c.test: Likewise.
* tests/target-cflags.test: Likewise.
* tests/lex3.test: Likewise.
* tests/yacc-basic.test: Likewise.
* tests/autohdr4.test: Likewise. Also, extend the test to ensure
more coverage in cross-compile mode.
* tests/canon7.test: Likewise.
* tests/check9.test: Removed, split into two new tests ...
* tests/check-subst-prog.test: ... this one, which requires a
native C compiler ...
* tests/check-subst.test: ... and this one, which doesn't require
any compiler.
* tests/parallel-tests4.test: Removed, split into two new tests ...
* tests/parallel-tests-suffix-prog.test: ... this one, which
requires a native C compiler ...
* tests/parallel-tests-suffix.test: ... and this one, which
doesn't require any compiler.
* tests/parallel-tests7.test: Removed, split into two new tests ...
* tests/parallel-tests-ext-driver-prog.test: ... this one, which
requires a native C compiler ...
* tests/parallel-tests-ext-driver.test: ... and this one, which
doesn't require any compiler.
* tests/Makefile.am (TESTS): Update.
|
|
|
79103003
|
2011-01-08T19:40:04
|
|
tests: enable 'errexit' shell flag by default.
* tests/defs: Enable `errexit' shell flag (near the end).
Removed redundant comment about the enabling of shell traces.
* tests/README (Writing test cases): Update, and use nicer
formatting in a couple of places.
* All tests: Adjusted by removing now-redundant calls to
'set -e'.
|
|
|
f923b46e
|
2010-03-04T21:09:13
|
|
Remove redundant unset of variable TESTS from some test scripts.
* tests/color.test: Do not unset the `TESTS' variable, as it's
already unset in the `defs' file.
* tests/check5.test: Likewise.
* tests/check8.test: Likewise.
* tests/check9.test: Likewise.
* tests/check10.test: Likewise.
* tests/check11.test: Likewise.
* tests/parallel-tests.test: Likewise.
* tests/parallel-tests3.test: Likewise.
* tests/parallel-tests4.test: Likewise.
* tests/parallel-tests5.test: Likewise.
* tests/parallel-tests6.test: Likewise.
* tests/parallel-tests7.test: Likewise.
|
|
fcf2f560
|
2009-05-17T15:32:40
|
|
Revert Automake license to GPLv2+.
Automake will move to GPLv3+ once the Exception statement has
been rewritten to use the new GPLv3 exception language. This
change does not impact the COPYING file that may be installed
by `automake --add-missing'.
* COPYING: Revert to GPLv2. All uses changed.
* NEWS: Update.
Signed-off-by: Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
|
|
|
1692795d
|
2009-04-09T00:16:35
|
|
parallel-tests: Fix driver for nonempty executable extension.
* automake.in (handle_tests): New substitution `%am__EXEEXT%',
defined as 'FALSE' for non-generic rules, or if no programs are
built at all. Otherwise, define it as configure conditional.
* lib/am/check2.am [%am__EXEEXT%] (%EXT%$(EXEEXT).log): New
conditional generic rule.
* m4/init.m4: Hook an m4_provide of `_AM_COMPILER_EXEEXT' onto
Autoconf's `_AC_COMPILER_EXEEXT' macro.
(AM_INIT_AUTOMAKE): If `_AM_COMPILER_EXEEXT' has been provided
at `AC_CONFIG_COMMANDS_PRE' time, then introduce a conditional
`am__EXEEXT', defined to true iff `$EXEEXT' is nonempty.
* tests/check5.test: Only match `_EXEEXT_[1-9]' here, to avoid
false positives stemming from `@am__EXEEXT_TRUE@'.
* NEWS: Update.
Signed-off-by: Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
|
|
|
20594c08
|
2008-09-06T19:20:32
|
|
Use `Exit' instead of `exit' in test suite.
Cater to Bourne shells like Solaris sh that do not pass the
`exit' argument as status to the cleanup trap.
* Makefile.am (maintainer-check): Check that here-documents
use only `END' or `EOF' as delimiter in the test suite.
Check that, outside of here-documents, the tests do not use
`exit' with an argument, but use `Exit' instead.
* tests/defs.in (Exit): New function. Use it throughout,
starting with the introduction of the exit trap.
* tests/*.test: Use `Exit $arg' instead of `exit $arg'
throughout, except inside created files.
Signed-off-by: Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
|
|
|
74dc9992
|
2008-01-13T18:05:04
|
|
Fix Heisenbug trying to unset a sometimes-not-set variable.
* tests/check5.test: Do not error out upon `unset TESTS' due to
`set -e', in case TESTS was not set.
* tests/color.test: Likewise.
|
|
|
e3acdefa
|
2007-12-08T11:20:24
|
|
Reword the copyright notices to match what's suggested in GPLv3.
|
|
|
83df77e5
|
2007-11-12T19:53:32
|
|
Avoid spurious test failure with `make check TESTS=check5.test'.
* tests/check5.test: unset TESTS.
|
|
|
b9ff055d
|
2007-07-07T11:23:29
|
|
* COPYING, lib/COPYING: Update to GPLv3. All uses changed.
* NEWS: Update.
|
|
9d0eaef6
|
2006-04-09T13:56:33
|
|
* lib/Automake/Variable.pm (_hash_varname, _hash_values): New functions.
(_gen_varname): Use _hash_values, and return a flag indicating whether
the variable name was generated or reused.
(transform_variable_recursively): Do not redefine variables that
are reused, and try to reuse the variable being transformed.
* tests/check2.test: Make sure TESTS hasn't been redefined.
* tests/check5.test, tests/exeext4.test: Make sure variables have
been reused.
* tests/subst2.test: Make sure bin_PROGRAMS gets rewritten.
|
|
|
9e5d3c40
|
2006-03-18T06:32:36
|
|
* tests/check5.test, tests/nobast.test: Fix $MAKE and rm
invocations to please maintainer-check.
|
|
|
3dae6da4
|
2006-01-29T17:35:12
|
|
Append $(EXEEXT) to programs that may be listed in TESTS.
Report from Simon Josefsson.
* automake.in (%known_programs): New global.
(initialize_per_input): Reset it.
(append_exeext): Take a predicate as first argument to select
the filename to rewrite.
(handle_programs): Fill %known_programs.
(handle_tests): Append $(EXEEXT) to all tests that are in
%known_programs.
(am_install_var): Update call to append_exeext.
* doc/automake.texi (EXEEXT): TESTS is also rewritten.
(Tests): More about the difference between check_PROGRAMS and TESTS.
Give an example of TEST_ENVIRONMENT.
* tests/cond32.test: Augment with a nested condition.
* tests/exeext4.test: Also check TESTS.
* tests/check5.test: New file.
* tests/Makefile.am (TESTS): Add check5.test.
|