kmx git

Commit	Date	Message
db973eaa	2012-02-21T19:47:36	tests: prefer 'configure.ac' over 'configure.in' With this change, our testsuite now uses 'configure.ac' as the name for the typical autoconf input, instead of the obsolescent 'configure.in' (which has been deprecated for several years, at least since autoconf 2.50). Most of the test cases changed by this commit have been automatically modified with this sed command (using GNU sed): sed -i 's/\<configure\(\\\?\)\.in\>/configure\1.ac/g' * syntax-checks.mk (sc_tests_no_configure_in): New syntax check. (syntax_check_rules): Add it. * tests/defs: Create stub for autoconf input in 'configure.ac', not in 'configure.in'. Adjust comments. ($AUTOCONF, $AUTOHEADER, $AUTORECONF): Remove workaround for the infamous debian autoconf wrapper: we don't need such workaround anymore now that we name our autoconf input as 'configure.ac'. For more information, see commit v1.11-564-g63da492 "test defs: hack to support autoconf-wrapper programs" of 16-12-2011. * tests/README: Use 'configure.ac', not 'configure.in'. * Many many tests: Likewise. * tests/backcompat3.test: Adjust to avoid spurious failures. * tests/backcompat5.test: Likewise. * tests/missing6.test: Likewise. * tests/backcompat6.test: Likewise, and extend a bit since we are at it.
641a5a4b	2012-02-16T10:46:23	maint: run "make update-copyright"
fc5ac9a1	2011-05-26T15:42:02	tests: tweak and improve tests on Automake conditionals The "avoid the requirement of a working compiler" we refer about below is obtained by disabling automatic dependency tracking and defining `CC' (and `EXEEXT', `OBJEXT', `CXX', etc., if needed) to dummy values, either directly in the `Makefile.am', or by AC_SUBST in `configure.in'. The "cosmetic changes" we refer about below consists in, e.g., adding a trailing `:' command to a script, using proper m4 quoting in `configure.in' files, adding commands that offer more debugging output, explicitly declaring phony targets as such in Makefiles, making use of idioms more consistent with those employed in other tests, following the GNU formatting standards more closely, etc. * tests/cond.test: Cosmetic changes. * tests/cond3.test: Likewise. * tests/cond10.test: Likewise. * tests/cond14.test: Likewise. * tests/cond15.test: Likewise. * tests/cond17.test: Likewise. * tests/cond40.test: Likewise. * tests/cond13.test: Likewise, and make grepping of the generated `Makefile.in' slightly stricter. * tests/cond6.test: Extend by also running ./configure, make and "make install". Few cosmetic changes. * tests/cond8.test: Likewise. * tests/cond2.test: Do few cosmetic changes. Make grepping of automake stderr stricter. * tests/cond20.test: Likewise. * tests/cond23.test: Likewise. * tests/cond24.test: Likewise. * tests/cond42.test: Likewise. * tests/cond46.test: Likewise. * tests/cond9.test: Move more checks in the `Makefile.am' instead of grepping make's output. * tests/cond38.test: Likewise. * tests/cond11.test: Likewise. Avoid the requirement of a working C compiler. * tests/cond16.test: Likewise. * tests/cond22.test: Likewise. * tests/cond30.test: Likewise. * tests/cond31.test: Likewise. * tests/cond4.test: Likewise, and drop the now-useless GNU make requirement as well. * tests/cond18.test: Likewise. * tests/cond19.test: Likewise. * tests/cond22.test: Likewise. * tests/cond25.test: Add trailing `:' command. * tests/cond26.test: Likewise. * tests/cond27.test: Likewise. * tests/cond28.test: Likewise. * tests/cond29.test: Use `unindent' function for better formatting. Other minor cosmetic changes. Use a `timeout' program (if it's available) to determine whether the script takes too long, instead of just hoping that the user will notice an abnormally long test execution time. * tests/cond33.test: Extend a bit. Fix heading comments. Few more cosmetic changes. * tests/cond37.test: Ensure verbose printing of captured make output. Minor cosmetic changes. * tests/cond34.test: Likewise. Avoid the requirement of a working C compiler. Make grepping of make output slightly stricter. * tests/cond35.test: Quote literal dots in grep regexp. Add extra debugging output. Minor cosmetic changes. * tests/cond36.test: Likewise. * tests/cond41.test: Do not simply check that aclocal fails, but also grep its stderr for the expected error message. * tests/cond43.test: Likewise (but the program being automake). Few cosmetic changes. * tests/condd.test: Avoid the requirement of a working C compiler. * tests/condman3.test: Extend by using more man pages and more manpage sections. * tests/condman.test: Removed, it's completely superseded by `condman3.test'. * tests/Makefile.am (TESTS): Update.
79103003	2011-01-08T19:40:04	tests: enable 'errexit' shell flag by default. * tests/defs: Enable `errexit' shell flag (near the end). Removed redundant comment about the enabling of shell traces. * tests/README (Writing test cases): Update, and use nicer formatting in a couple of places. * All tests: Adjusted by removing now-redundant calls to 'set -e'.
755ebe32	2010-07-14T15:22:12	Tweak, extend and improve tests `cond[a-z].test'. tests/condd.test: Add trailing `:' command. Typofix in comment. * tests/condhook.test: Make sure target `install-data-hook' is not called by `make install', but that data files are installed. Use proper m4 quoting in configure.in. Add trailing `:' command. * tests/condhook2.test: New test, sister test of condhook, with inverted semantic. * tests/condinc2.test: Use proper m4 quoting in configure.in. Prefer trailing `:' command over trailing `Exit 0'. * tests/condman2.test: Enable errexit shell flag, and related changes. Add trailing `:' command. * tests/condman.test: Likewise. Also, do not create useless dummy manpages, and use proper m4 quoting in configure.in. * tests/condman3.test: New test, similar to condman.test, but it also runs ./configure and "make install", and check the installed files. * tests/Makefile.am (TESTS): Updated.

db973eaa

2012-02-21T19:47:36

tests: prefer 'configure.ac' over 'configure.in' With this change, our testsuite now uses 'configure.ac' as the name for the typical autoconf input, instead of the obsolescent 'configure.in' (which has been deprecated for several years, at least since autoconf 2.50). Most of the test cases changed by this commit have been automatically modified with this sed command (using GNU sed): sed -i 's/\<configure$\\\?$\.in\>/configure\1.ac/g' * syntax-checks.mk (sc_tests_no_configure_in): New syntax check. (syntax_check_rules): Add it. * tests/defs: Create stub for autoconf input in 'configure.ac', not in 'configure.in'. Adjust comments. ($AUTOCONF, $AUTOHEADER, $AUTORECONF): Remove workaround for the infamous debian autoconf wrapper: we don't need such workaround anymore now that we name our autoconf input as 'configure.ac'. For more information, see commit v1.11-564-g63da492 "test defs: hack to support autoconf-wrapper programs" of 16-12-2011. * tests/README: Use 'configure.ac', not 'configure.in'. * Many many tests: Likewise. * tests/backcompat3.test: Adjust to avoid spurious failures. * tests/backcompat5.test: Likewise. * tests/missing6.test: Likewise. * tests/backcompat6.test: Likewise, and extend a bit since we are at it.

641a5a4b

2012-02-16T10:46:23

maint: run "make update-copyright"

fc5ac9a1

2011-05-26T15:42:02

tests: tweak and improve tests on Automake conditionals The "avoid the requirement of a working compiler" we refer about below is obtained by disabling automatic dependency tracking and defining `CC' (and `EXEEXT', `OBJEXT', `CXX', etc., if needed) to dummy values, either directly in the `Makefile.am', or by AC_SUBST in `configure.in'. The "cosmetic changes" we refer about below consists in, e.g., adding a trailing `:' command to a script, using proper m4 quoting in `configure.in' files, adding commands that offer more debugging output, explicitly declaring phony targets as such in Makefiles, making use of idioms more consistent with those employed in other tests, following the GNU formatting standards more closely, etc. * tests/cond.test: Cosmetic changes. * tests/cond3.test: Likewise. * tests/cond10.test: Likewise. * tests/cond14.test: Likewise. * tests/cond15.test: Likewise. * tests/cond17.test: Likewise. * tests/cond40.test: Likewise. * tests/cond13.test: Likewise, and make grepping of the generated `Makefile.in' slightly stricter. * tests/cond6.test: Extend by also running ./configure, make and "make install". Few cosmetic changes. * tests/cond8.test: Likewise. * tests/cond2.test: Do few cosmetic changes. Make grepping of automake stderr stricter. * tests/cond20.test: Likewise. * tests/cond23.test: Likewise. * tests/cond24.test: Likewise. * tests/cond42.test: Likewise. * tests/cond46.test: Likewise. * tests/cond9.test: Move more checks in the `Makefile.am' instead of grepping make's output. * tests/cond38.test: Likewise. * tests/cond11.test: Likewise. Avoid the requirement of a working C compiler. * tests/cond16.test: Likewise. * tests/cond22.test: Likewise. * tests/cond30.test: Likewise. * tests/cond31.test: Likewise. * tests/cond4.test: Likewise, and drop the now-useless GNU make requirement as well. * tests/cond18.test: Likewise. * tests/cond19.test: Likewise. * tests/cond22.test: Likewise. * tests/cond25.test: Add trailing `:' command. * tests/cond26.test: Likewise. * tests/cond27.test: Likewise. * tests/cond28.test: Likewise. * tests/cond29.test: Use `unindent' function for better formatting. Other minor cosmetic changes. Use a `timeout' program (if it's available) to determine whether the script takes too long, instead of just hoping that the user will notice an abnormally long test execution time. * tests/cond33.test: Extend a bit. Fix heading comments. Few more cosmetic changes. * tests/cond37.test: Ensure verbose printing of captured make output. Minor cosmetic changes. * tests/cond34.test: Likewise. Avoid the requirement of a working C compiler. Make grepping of make output slightly stricter. * tests/cond35.test: Quote literal dots in grep regexp. Add extra debugging output. Minor cosmetic changes. * tests/cond36.test: Likewise. * tests/cond41.test: Do not simply check that aclocal fails, but also grep its stderr for the expected error message. * tests/cond43.test: Likewise (but the program being automake). Few cosmetic changes. * tests/condd.test: Avoid the requirement of a working C compiler. * tests/condman3.test: Extend by using more man pages and more manpage sections. * tests/condman.test: Removed, it's completely superseded by `condman3.test'. * tests/Makefile.am (TESTS): Update.

79103003

2011-01-08T19:40:04

tests: enable 'errexit' shell flag by default. * tests/defs: Enable `errexit' shell flag (near the end). Removed redundant comment about the enabling of shell traces. * tests/README (Writing test cases): Update, and use nicer formatting in a couple of places. * All tests: Adjusted by removing now-redundant calls to 'set -e'.

755ebe32

2010-07-14T15:22:12

Tweak, extend and improve tests `cond[a-z]*.test'. * tests/condd.test: Add trailing `:' command. Typofix in comment. * tests/condhook.test: Make sure target `install-data-hook' is not called by `make install', but that data files are installed. Use proper m4 quoting in configure.in. Add trailing `:' command. * tests/condhook2.test: New test, sister test of condhook, with inverted semantic. * tests/condinc2.test: Use proper m4 quoting in configure.in. Prefer trailing `:' command over trailing `Exit 0'. * tests/condman2.test: Enable errexit shell flag, and related changes. Add trailing `:' command. * tests/condman.test: Likewise. Also, do not create useless dummy manpages, and use proper m4 quoting in configure.in. * tests/condman3.test: New test, similar to condman.test, but it also runs ./configure and "make install", and check the installed files. * tests/Makefile.am (TESTS): Updated.

kc3-lang/automake/tests/condman3.test

tests/condman3.test

Log