|
db973eaa
|
2012-02-21T19:47:36
|
|
tests: prefer 'configure.ac' over 'configure.in'
With this change, our testsuite now uses 'configure.ac' as the
name for the typical autoconf input, instead of the obsolescent
'configure.in' (which has been deprecated for several years, at
least since autoconf 2.50).
Most of the test cases changed by this commit have been
automatically modified with this sed command (using GNU
sed):
sed -i 's/\<configure\(\\\?\)\.in\>/configure\1.ac/g'
* syntax-checks.mk (sc_tests_no_configure_in): New syntax check.
(syntax_check_rules): Add it.
* tests/defs: Create stub for autoconf input in 'configure.ac',
not in 'configure.in'. Adjust comments.
($AUTOCONF, $AUTOHEADER, $AUTORECONF): Remove workaround for the
infamous debian autoconf wrapper: we don't need such workaround
anymore now that we name our autoconf input as 'configure.ac'.
For more information, see commit v1.11-564-g63da492 "test defs:
hack to support autoconf-wrapper programs" of 16-12-2011.
* tests/README: Use 'configure.ac', not 'configure.in'.
* Many many tests: Likewise.
* tests/backcompat3.test: Adjust to avoid spurious failures.
* tests/backcompat5.test: Likewise.
* tests/missing6.test: Likewise.
* tests/backcompat6.test: Likewise, and extend a bit since we
are at it.
|
|
|
641a5a4b
|
2012-02-16T10:46:23
|
|
maint: run "make update-copyright"
|
|
|
f37035c3
|
2011-07-16T10:55:05
|
|
test defs: new subroutine 'seq_', simulating GNU seq(1)
* tests/defs (seq_): New subroutine.
* tests/instmany.test: Use it.
* tests/instmany-mans.test: Likewise.
* tests/instmany-python.test: Likewise.
* tests/self-check-seq.test: New self test.
* tests/Makefile.am (TESTS): Update.
|
|
|
0933a8ca
|
2011-07-16T10:37:55
|
|
tests: more uses of the 'unindent' subroutine
* tests/backcompat.test: Prefer `unindent' over plain `cat' for
here documents created from within a loop of if/else body.
* tests/backcompat2.test: Likewise.
* tests/backcompat4.test: Likewise.
* tests/init.test: Likewise.
* tests/instmany.test: Likewise.
* tests/instmany-mans.test: Likewise.
* tests/instmany-python.test: Likewise.
* tests/missing5.test: Likewise.
* tests/parallel-am2.test : Likewise.
* tests/parallel-am3.test : Likewise.
* tests/pr307.test: Likewise.
* tests/depend4.test: Likewise. Since we are at it, normalize
other code formatting.
* tests/instfail-java.test: Prefer `echo' over `cat' + here-doc
inside a for loop.
|
|
|
4f73c9f7
|
2010-06-03T00:30:03
|
|
testsuite: use `skip_' for skipping of tests
* tests/defs: Use the `skip_' subroutine for test skipping. Also
give sometimes more detailed messages about the reasons for the
skipping.
* tests/canon7.test: Likewise.
* tests/color.test: Likewise.
* tests/color2.test: Likewise.
* tests/compile2.test: Likewise.
* tests/dejagnu7.test: Likewise.
* tests/depcomp6.test: Likewise.
* tests/depcomp9.test: Likewise.
* tests/depcomp10.test: Likewise.
* tests/distlinks.test: Likewise.
* tests/distlinksbrk.test: Likewise.
* tests/fn99.test: Likewise.
* tests/fn99subdir.test: Likewise.
* tests/forcemiss2.test: Likewise.
* tests/fort5.test: Likewise.
* tests/gettext3.test: Likewise.
* tests/install2.test: Likewise.
* tests/instfail-info.test: Likewise.
* tests/instfail-java.test: Likewise.
* tests/instfail-libtool.test: Likewise.
* tests/instfail.test: Likewise.
* tests/instmany-mans.test: Likewise.
* tests/instmany-python.test: Likewise.
* tests/instmany.test: Likewise.
* tests/instsh3.test: Likewise.
* tests/ltinit.test: Likewise.
* tests/makej2.test: Likewise.
* tests/mdate6.test: Likewise.
* tests/mkinst3.test: Likewise.
* tests/parallel-tests3.test: Likewise.
* tests/parallel-tests-reset-term.test: Likewise.
* tests/parallel-tests-unreadable-log.test: Likewise,
* tests/python-virtualenv.test: Likewise.
* tests/remake-gnulib-remove-header.test: Likewise.
* tests/subobj9.test: Likewise.
* tests/symlink2.test: Likewise.
* tests/tar.test: Likewise.
* tests/tar2.test: Likewise.
* tests/txinfo26.test: Likewise.
* tests/vala2.test: Likewise.
* tests/vala3.test: Likewise.
* tests/vala5.test: Likewise.
* tests/vtexi4.test: Likewise.
* tests/instdir-texi.test: Likewise.
* tests/txinfo21.test: Likewise.
SquashMe
|
|
|
79103003
|
2011-01-08T19:40:04
|
|
tests: enable 'errexit' shell flag by default.
* tests/defs: Enable `errexit' shell flag (near the end).
Removed redundant comment about the enabling of shell traces.
* tests/README (Writing test cases): Update, and use nicer
formatting in a couple of places.
* All tests: Adjusted by removing now-redundant calls to
'set -e'.
|
|
|
a25c6733
|
2010-09-25T21:31:06
|
|
Testsuite: Use `$PATH_SEPARATOR', not `:', when extending PATH.
* tests/compile2.test: Do no uselessly (implicitly) repeat the
computation of PATH_SEPARATOR again.
* tests/instmany-mans.test: Use `$PATH_SEPARATOR', not `:', when
extending/redefining PATH.
* tests/instmany-python.test: Likewise.
* tests/instmany.test: Likewise.
* tests/man4.test: Likewise.
* tests/mkinst3.test: Likewise.
* tests/mmodely.test: Likewise.
* tests/multlib.test: Likewise.
* tests/txinfo30.test: Likewise.
* tests/README (Section "Writing test cases" subsection "Do"):
Updated.
* Makefile.am (sc_tests_PATH_SEPARATOR): New maintainer check.
(syntax_check_rules): Updated.
|
|
2da14d75
|
2009-05-19T07:49:27
|
|
Revert last patch, IRIX has an editor named `jot'.
* tests/instmany-mans.test: Do not try `jot'.
* tests/instmany-python.test: Likewise.
* tests/instmany.test: Likewise.
Report by Peter O'Gorman.
Signed-off-by: Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
|
|
|
23aa3dbb
|
2009-05-18T20:57:05
|
|
testsuite: also try `jot' as `seq' replacement.
* tests/instmany-mans.test: Try BSD `jot' before resorting to a
slow but portable shell loop.
* tests/instmany-python.test: Likewise.
* tests/instmany.test: Likewise.
Suggestion by Peter O'Gorman.
Signed-off-by: Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
|
|
|
fcf2f560
|
2009-05-17T15:32:40
|
|
Revert Automake license to GPLv2+.
Automake will move to GPLv3+ once the Exception statement has
been rewritten to use the new GPLv3 exception language. This
change does not impact the COPYING file that may be installed
by `automake --add-missing'.
* COPYING: Revert to GPLv2. All uses changed.
* NEWS: Update.
Signed-off-by: Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
|
|
|
4e9c77ba
|
2009-04-14T23:42:14
|
|
testsuite: do not fail on systems without read permissions.
* tests/instfail-info.test: Do not use the `non-root'
requirement for testing whether files may be made unreadable;
instead use `test -r' and skip the test if that still works.
* tests/instfail-java.test: Likewise.
* tests/instfail-libtool.test: Likewise.
* tests/instfail.test: Likewise.
* tests/instmany-mans.test: Likewise.
* tests/instmany-python.test: Likewise.
* tests/instmany.test: Likewise.
* tests/parallel-tests9.test: Likewise.
Signed-off-by: Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
|
|
|
d016ef1e
|
2008-11-04T22:42:23
|
|
Multiple 'make uninstall' should not fail even for TEXINFOS.
* lib/am/texinfos.am (uninstall-info-am): Do not fail due to
install-info if the installed file does not exist (any more).
* tests/txinfo26.test: Issue multiple `make uninstall'.
* tests/instmany-mans.test: Likewise.
* tests/instmany-python.test: Likewise.
* tests/instmany.test: Likewise.
* tests/txinfo26.test: Likewise.
* NEWS: Update.
Signed-off-by: Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
|
|
|
196abe9a
|
2008-09-07T00:43:38
|
|
Exit upon `install' failure, part one.
* lib/am/data.am (install-%DIR%%PRIMARY%): Exit if any install
command fails.
* lib/am/python.am (install-%DIR%PYTHON): Likewise.
* lib/am/scripts.am (install-%DIR%SCRIPTS): Likewise.
* lib/am/texinfos.am (install-dvi-am, install-html-am)
(install-info-am:, install-pdf-am): Likewise.
* tests/instmany.test: New test, for SCRIPTS, DATA, and HEADERS.
* tests/instmany-python.test: New test, for PYTHON.
* tests/Makefile.am: Adjust.
Signed-off-by: Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
|