|
d8add592
|
2017-03-02T18:55:53
|
|
maint: Update copyright years to 2017.
This update has been made with 'make update-copyright'.
|
|
5de75f07
|
2015-01-05T22:48:33
|
|
maint: update copyright years to 2015 (branch 'micro')
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
|
|
|
a78f63c5
|
2014-04-21T15:10:54
|
|
maint: update copyright years
We've been in 2014 already for few months now...
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
|
|
|
ffd4ecc9
|
2013-05-20T11:23:01
|
|
tests: better idiom to override make macro defs on the cmdline
We now do so with a new wrapper shell function 'run_make()', which
relies on the use of AM_MAKEFLAGS, avoiding the use of the '-e' make
option. The use of that option (that causes the environment variables
to take precedence over the macro definitions in the Makefile) has
proved to be quite brittle in the past, causing annoying and sometimes
problematic spurious failures. This has worsened in some still
unpublished work going on in development branches. It's time to solve
the issue once and for all.
Note that we do not convert all uses of $MAKE in the testsuite right
away; we might do so in follow-up changes, with leisure, to avoid a
"patch bomb" effect (this commit is already too much of a bomb itself).
What we do in this commit is to get rid of all "$MAKE -e" invocations.
We admit that the implementation and feature-set of 'run_make()' are
far from perfect, but good enough for our current purposes. We'll
improve 'run_make()' if and when the need arises.
* syntax-checks.mk (sc_tests_no_make_e): New syntax check, guard against
the use of "$MAKE -e".
(syntax_check_rules): Add it.
(sc_tests_overriding_macros_on_cmdline): Adjust.
(lint): New, alias for 'maintainer-check', for lazy typists. Idea
backported from the 'maint' branch (Automake 1.13a).
* t/ax/am-test-lib.sh (run_make): New function. Run $MAKE with the
given command-line arguments, handling command-line override of variable
definitions in a smart way (using AM_MAKEFLAGS if a non-GNU make
implementation is detected to be in use).
(useless_vpath_rebuild): Adjust to use 'run_make', to avoid a spurious
maintainer check failure.
(yl_distcheck): Use 'run_make' rather than bare '$MAKE'.
(single_quote, append_single_quoted, is_valid_varname): New auxiliary
function, used, directly or indirectly, by it.
* Many tests: Adjust to avoid the use of "$MAKE -e", and prefer the
use of 'run_make' in few other contexts as well, where it makes sense.
Other minor fixlets while at it.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
|
|
|
84e12c32
|
2013-05-17T13:45:44
|
|
tests: sanitize 'unset' usages
In some shells (e.g., Solaris 10 /bin/ksh, or NetBSD 5.1 /bin/sh),
"unset VAR" returns a non-zero exit status in case the VAR variable
is already unset. This doesn't interact well with our usage of
"set -e" in the testsuite. So far, we've avoided spurious failures
by either explicitly ignoring the exit status from unset:
unset VAR || :
or explicitly ensuring that a variable is set, before trying to
unset it:
VAR=; unset VAR
But we can do better, by aliasing the 'unset' command to a custom
function that will take care of these details for us. This will
avoid us annoying spurious failures in the future, failures that
have already bitten us too much times. For an example, refer to
commit 'v1.12.2-88-g5b1dae5' of 2012-08-05 (tests: avoid tons of
spurious failures on NetBSD).
* t/ax/test-lib.sh (_am_unset): New function.
(unset): New alias to it.
(_am_exit): Adjust comments.
* t/ax/am-test-lib.sh: No need to temporary disable the 'errexit'
shell flag when unsetting variables that are potentially already
unset.
(am_process_requirements): Adjust to remove a now-useless
workaround related to unset.
* t/aclocal-macrodir.tap: Likewise.
* t/aclocal-macrodirs.tap: Likewise.
* t/auxdir-autodetect.sh: Likewise.
* t/ax/am-test-lib.sh: Likewise.
* t/ax/test-lib.sh: Likewise.
* t/check-tests-in-builddir.sh: Likewise.
* t/dist-formats.tap: Likewise.
* t/distcheck-configure-flags-am.sh: Likewise.
* t/distcheck-configure-flags.sh: Likewise.
* t/java-empty-classpath.sh: Likewise.
* t/javaflags.sh: Likewise.
* t/lflags.sh: Likewise.
* t/lflags2.sh: Likewise.
* t/lisp-flags.sh: Likewise.
* t/lisp6.sh: Likewise.
* t/missing-auxfile-stops-makefiles-creation.sh: Likewise.
* t/parallel-am.sh: Likewise.
* t/parallel-am2.sh: Likewise.
* t/parallel-am3.sh: Likewise.
* t/parallel-tests-log-override-recheck.sh: Likewise.
* t/pkg-config-macros.sh: Likewise.
* t/python-missing.sh: Likewise.
* t/python-too-old.sh: Likewise.
* t/python11.sh: Likewise.
* t/self-check-dir.tap: Likewise.
* t/self-check-report.sh: Likewise.
* t/self-check-seq.tap: Likewise.
* t/silent-configsite.sh: Likewise.
* t/suffix6c.sh: Likewise.
* t/tar-override.sh: Likewise.
* t/tests-environment-and-log-compiler.sh: Likewise.
* t/vala-configure.sh: Likewise.
* t/werror3.sh: Likewise.
* t/yflags-cmdline-override.sh: Likewise.
* t/yflags.sh: Likewise.
* t/yflags2.sh: Likewise.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
|
|
|
74017b56
|
2013-05-16T12:18:43
|
|
tests: remove exec bit from all of them ('micro' branch)
It gives the impression that they are directly runnable, as with
"./t/foo.sh", but it has been a while since that was the case. Today,
tests are runnable only through "make check" or "./runtest".
This change is for the 'micro' branch (automake 1.13.2a). It will
soon be followed by similar patches for the 'maint' branch (automake
1.13a) and the 'master' branch (automake 1.99a).
* t/*.sh, t/*.tap: Remove executable bit.
* maint.mk (sc_tests_executable): Remove.
(syntax_check_rules): Adjust.
* gen-testsuite-part: Set permissions of generated tests to
'444' (-r--r--r--), rather than 555 (-r-xr-xr-x).
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
|
|
|
df375ef1
|
2013-04-22T23:37:11
|
|
tests: avoid a spurious failure with the Korn Shell
* t/list-flags.sh: Ensure the EMACS variable is set before unsetting it.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
|
|
af633f5c
|
2013-01-21T13:35:03
|
|
tests: avoid a spurious failure when running inside Emacs
Some versions of Emacs set the environment variable 'EMACS' to 't'
for child processes. Thus, when running from inside Emacs, "$(MAKE) -e"
erroneously allows the 't' to override the one in the Makefile.
* t/lisp-flags.sh: Unset var 'EMACS', fixing the issue.
Copyright-paperwork-exempt: yes
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
|
|
|
7df8b28c
|
2012-12-31T18:18:37
|
|
maint: update copyright year for 2013 (in branch maint)
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
|
|
|
5ddf1007
|
2012-10-27T16:41:39
|
|
tests: prefer including 'test-init.sh' rather than './defs'
This is a follow-up to today's commit v1.12.4-22-g0610fc8,
"tests: prepare to move ./defs to t/ax/test-init.sh"
* All tests: To run the common setup, use the command:
. test-init.sh
instead of the older, "historical" one:
. ./defs || exit 1
Note that the "|| exit 1" wasn't really useful, since the 'errexit'
shell flag is in effect in both './defs' and 'test-init.sh', and all
the known shells that are good enough to run the automake testsuite
do automatically exit with error when a sourced file cannot be found
(at least, they do so in non-interactive mode, which is the only
mode that concerns us in the testsuite).
* t/ax/tap-summary-aux.sh, t/ax/testsuite-summary-checks.sh: Likewise.
* gen-testsuite-part: Do the same in the generated tests.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
|
|
|
56cd2dda
|
2012-08-04T14:56:27
|
|
elisp: honour AM_ELCFLAFS and ELCFLAGS in byte-compilation
* lib/am/lisp.am (.el.elc): Add "$(AM_ELCFLAFS) $(ELCFLAGS)"
to the emacs command line.
* t/lisp-flags.sh: New test.
* t/list-of-tests.mk: Add it.
* doc/automake.texi (Emacs Lisp): Update.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
|