[gzip] Update sources to zlib 1.2.11 This can be tested by building with the Unix development build make setup devel make or by building the freetype-demos programs with meson setup build -Dfreetype2:zlib=internal meson compile -C out and trying to run `ftview` with a `.pcf.gz` font file. * src/gzip/ftgzip.c, src/gzip/rules.mk: Update for new zlib sources. Also remove the temporary fix introduced in commit 6a431038 to work around the fact that the internal sources were too old. * src/gzip/README.freetype: New file describing the origin of the sources and how they were modified. * src/gzip/patches/*: Patch files applied to original sources. * src/gzip/*: Updated zlib sources with the patch file(s) from `src/gzip/patches/` applied, followed by a conversion with zlib's `zlib2ansi` script.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888 889 890 891 892 893 894 895 896 897 898 899 900 901 902 903 904 905 906 907 908 909 910 911 912 913 914 915 916 917 918 919 920 921 922 923 924 925 926 927 928 929 930 931 932 933 934 935 936 937 938 939 940 941 942 943 944 945 946 947 948 949 950 951 952 953 954 955 956 957 958 959 960 961 962 963 964 965 966 967 968 969 970 971 972 973 974 975 976 977 978 979 980 981 982 983 984 985 986 987 988 989 990 991 992 993 994 995 996 997 998 999 1000 1001 1002 1003 1004 1005 1006 1007 1008 1009 1010 1011 1012 1013 1014 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 1025 1026 1027 1028 1029 1030 1031 1032 1033 1034 1035 1036 1037 1038 1039 1040 1041 1042 1043 1044 1045 1046 1047 1048 1049 1050 1051 1052 1053 1054 1055 1056 1057 1058 1059 1060 1061 1062 1063 1064 1065 1066 1067 1068 1069 1070 1071 1072 1073 1074 1075 1076 1077 1078 1079 1080 1081 1082 1083 1084 1085 1086 1087 1088 1089 1090 1091 1092 1093 1094 1095 1096 1097 1098 1099 1100 1101 1102 1103 1104 1105 1106 1107 1108 1109 1110 1111 1112 1113 1114 1115 1116 1117 1118 1119 1120 1121 1122 1123 1124 1125 1126 1127 1128 1129 1130 1131 1132 1133 1134 1135 1136 1137 1138 1139 1140 1141 1142 1143 1144 1145 1146 1147 1148 1149 1150 1151 1152 1153 1154 1155 1156 1157 1158 1159 1160 1161 1162 1163 1164 1165 1166 1167 1168 1169 1170 1171 1172 1173 1174 1175 1176 1177 1178 1179 1180 1181 1182 1183 1184 1185 1186 1187 1188 1189 1190 1191 1192 1193 1194 1195 1196 1197 1198 1199 1200 1201 1202 1203 1204 1205 1206 1207 1208 1209 1210 1211 1212 1213 1214 1215 1216 1217 1218 1219 1220 1221 1222 1223 1224 1225 1226 1227 1228 1229 1230 1231 1232 1233 1234 1235 1236 1237 1238 1239 1240 1241 1242 1243 1244 1245 1246 1247 1248 1249 1250 1251 1252 1253 1254 1255 1256 1257 1258 1259 1260 1261 1262 1263 1264 1265 1266 1267 1268 1269 1270 1271 1272 1273 1274 1275 1276 1277 1278 1279 1280 1281 1282 1283 1284 1285 1286 1287 1288 1289 1290 1291 1292 1293 1294 1295 1296 1297 1298 1299 1300 1301 1302 1303 1304 1305 1306 1307 1308 1309 1310 1311 1312 1313 1314 1315 1316 1317 1318 1319 1320 1321 1322 1323 1324 1325 1326 1327 1328 1329 1330 1331 1332 1333 1334 1335 1336 1337 1338 1339 1340 1341 1342 1343 1344 1345 1346 1347 1348 1349 1350 1351 1352 1353 1354 1355 1356 1357 1358 1359 1360 1361 1362 1363 1364 1365 1366 1367 1368 1369 1370 1371 1372 1373 1374 1375 1376 1377 1378 1379 1380 1381 1382 1383 1384 1385 1386 1387 1388 1389 1390 1391 1392 1393 1394 1395 1396 1397 1398 1399 1400 1401 1402 1403 1404 1405 1406 1407 1408 1409 1410 1411 1412 1413 1414 1415 1416 1417 1418 1419 1420 1421 1422 1423 1424 1425 1426 1427 1428 1429 1430 1431 1432 1433 1434 1435 1436 1437 1438 1439 1440 1441 1442 1443 1444 1445 1446 1447 1448 1449 1450 1451 1452 1453 1454 1455 1456 1457 1458 1459 1460 1461 1462 1463 1464 1465 1466 1467 1468 1469 1470 1471 1472 1473 1474 1475 1476 1477 1478 1479 1480 1481 1482 1483 1484 1485 1486 1487 1488 1489 1490 1491 1492 1493 1494 1495 1496 1497 1498 1499 1500 1501 1502 1503 1504 1505 1506 1507 1508 1509 1510 1511 1512 1513 1514 1515 1516 1517 1518 1519 1520 1521 1522 1523 1524 1525 1526 1527 1528 1529 1530 1531 1532 1533 1534 1535 1536 1537 1538 1539 1540 1541 1542 1543 1544 1545 1546 1547 1548 1549 1550 1551 1552 1553 1554 1555 1556 1557 1558 1559 1560 1561 1562 1563 1564 1565 1566 1567 1568 1569 1570 1571 1572 1573 1574 1575 1576 1577 1578 1579 1580 1581 1582 1583 1584 1585 1586 1587 1588 1589 1590 1591 1592 1593 1594 1595 1596 1597 1598 1599 1600 1601 1602 1603 1604 1605 1606 1607 1608 1609 1610 1611 1612 1613 1614 1615 1616 1617 1618 1619 1620 1621 1622 1623 1624 1625 1626 1627 1628 1629 1630 1631 1632 1633 1634 1635 1636 1637 1638 1639 1640 1641 1642 1643 1644 1645 1646 1647 1648 1649 1650 1651 1652 1653 1654 1655 1656 1657 1658 1659 1660 1661 1662 1663 1664 1665 1666 1667 1668 1669 1670 1671 1672 1673 1674 1675 1676 1677 1678 1679 1680 1681 1682 1683 1684 1685 1686 1687 1688 1689 1690 1691 1692 1693 1694 1695 1696 1697 1698 1699 1700 1701 1702 1703 1704 1705 1706 1707 1708 1709 1710 1711 1712 1713 1714 1715 1716 1717 1718 1719 1720 1721 1722 1723 1724 1725 1726 1727 1728 1729 1730 1731 1732 1733 1734 1735 1736 1737 1738 1739 1740 1741 1742 1743 1744 1745 1746 1747 1748 1749 1750 1751 1752 1753 1754 1755 1756 1757 1758 1759 1760 1761 1762 1763 1764 1765 1766 1767 1768 1769 1770 1771 1772 1773 1774 1775 1776 1777 1778 1779 1780 1781 1782 1783 1784 1785 1786 1787 1788 1789 1790 1791 1792 1793 1794 1795 1796 1797 1798 1799 1800 1801 1802 1803 1804 1805 1806 1807 1808 1809 1810 1811 1812 1813 1814 1815 1816 1817 1818 1819 1820 1821 1822 1823 1824 1825 1826 1827 1828 1829 1830 1831 1832 1833 1834 1835 1836 1837 1838 1839 1840 1841 1842 1843 1844 1845 1846 1847 1848 1849 1850 1851 1852 1853 1854 1855 1856 1857 1858 1859 1860 1861 1862 1863 1864 1865 1866 1867 1868 1869 1870 1871 1872 1873 1874 1875 1876 1877 1878 1879 1880 1881 1882 1883 1884 1885 1886 1887 1888 1889 1890 1891 1892 1893 1894 1895 1896 1897 1898 1899 1900 1901 1902 1903 1904 1905 1906 1907 1908 1909 1910 1911 1912 1913 1914 1915 1916 1917 1918 1919 1920 1921 1922 1923 1924 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1943 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 1986 1987 1988 1989 1990 1991 1992 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025 2026 2027 2028 2029 2030 2031 2032 2033 2034 2035 2036 2037 2038 2039 2040 2041 2042 2043 2044 2045 2046 2047 2048 2049 2050 2051 2052 2053 2054 2055 2056 2057 2058 2059 2060 2061 2062 2063 2064 2065 2066 2067 2068 2069 2070 2071 2072 2073 2074 2075 2076 2077 2078 2079 2080 2081 2082 2083 2084 2085 2086 2087 2088 2089 2090 2091 2092 2093 2094 2095 2096 2097 2098 2099 2100 2101 2102 2103 2104 2105 2106 2107 2108 2109 2110 2111 2112 2113 2114 2115 2116 2117 2118 2119 2120 2121 2122 2123 2124 2125 2126 2127 2128 2129 2130 2131 2132 2133 2134 2135 2136 2137 2138 2139 2140 2141 2142 2143 2144 2145 2146 2147 2148 2149 2150 2151 2152 2153 2154 2155 2156 2157 2158 2159 2160 2161 2162 2163 2164 2165 2166 2167 2168 2169 2170 2171 2172 2173 2174 2175 2176 2177 2178 2179 2180 2181 2182 2183 2184 2185 2186 2187 2188 2189 2190 2191 2192 2193 2194 2195 2196 2197 2198 2199 2200 2201 2202 2203 2204 2205 2206 2207 2208 2209 2210 2211 2212 2213 2214 2215 2216 2217 2218 2219 2220 2221 2222 2223 2224 2225 2226 2227 2228 2229 2230 2231 2232 2233 2234 2235 2236 2237 2238 2239 2240 2241 2242 2243 2244 2245 2246 2247 2248 2249 2250 2251 2252 2253 2254 2255 2256 2257 2258 2259 2260 2261 2262 2263 2264 2265 2266 2267 2268 2269 2270 2271 2272 2273 2274 2275 2276 2277 2278 2279 2280 2281 2282 2283 2284 2285 2286 2287 2288 2289 2290 2291 2292 2293 2294 2295 2296 2297 2298 2299 2300 2301 2302 2303 2304 2305 2306 2307 2308 2309 2310 2311 2312 2313 2314 2315 2316 2317 2318 2319 2320 2321 2322 2323 2324 2325 2326 2327 2328 2329 2330 2331 2332 2333 2334 2335 2336 2337 2338 2339 2340 2341 2342 2343 2344 2345 2346 2347 2348 2349 2350 2351 2352 2353 2354 2355 2356 2357 2358 2359 2360 2361 2362 2363 2364 2365 2366 2367 2368 2369 2370 2371 2372 2373 2374 2375 2376 2377 2378 2379 2380 2381 2382 2383 2384 2385 2386 2387 2388 2389 2390 2391 2392 2393 2394 2395 2396 2397 2398 2399 2400 2401 2402 2403 2404 2405 2406 2407 2408 2409 2410 2411 2412 2413 2414 2415 2416 2417 2418 2419 2420 2421 2422 2423 2424 2425 2426 2427 2428 2429 2430 2431 2432 2433 2434 2435 2436 2437 2438 2439 2440 2441 2442 2443 2444 2445 2446 2447 2448 2449 2450 2451 2452 2453 2454 2455 2456 2457 2458 2459 2460 2461 2462 2463 2464 2465 2466 2467 2468 2469 2470 2471 2472 2473 2474 2475 2476 2477 2478 2479 2480 2481 2482 2483 2484 2485 2486 2487 2488 2489 2490 2491 2492 2493 2494 2495 2496 2497 2498 2499 2500 2501 2502 2503 2504 2505 2506 2507 2508 2509 2510 2511 2512 2513 2514 2515 2516 2517 2518 2519 2520 2521 2522 2523 2524 2525 2526 2527 2528 2529 2530 2531 2532 2533 2534 2535 2536 2537 2538 2539 2540 2541 2542 2543 2544 2545 2546 2547 2548 2549 2550 2551 2552 2553 2554 2555 2556 2557 2558 2559 2560 2561 2562 2563 2564 2565 2566 2567 2568 2569 2570 2571 2572 2573 2574 2575 2576 2577 2578 2579 2580 2581 2582 2583 2584 2585 2586 2587 2588 2589 2590 2591 2592 2593 2594 2595 2596 2597 2598 2599 2600 2601 2602 2603 2604 2605 2606 2607 2608 2609 2610 2611 2612 2613 2614 2615 2616 2617 2618 2619 2620 2621 2622 2623 2624 2625 2626 2627 2628 2629 2630 2631 2632 2633 2634 2635 2636 2637 2638 2639 2640 2641 2642 2643 2644 2645 2646 2647 2648 2649 2650 2651 2652 2653 2654 2655 2656 2657 2658 2659 2660 2661 2662 2663 2664 2665 2666 2667 2668 2669 2670 2671 2672 2673 2674 2675 2676 2677 2678 2679 2680 2681 2682 2683 2684 2685 2686 2687 2688 2689 2690 2691 2692 2693 2694 2695 2696 2697 2698 2699 2700 2701 2702 2703 2704 2705 2706 2707 2708 2709 2710 2711 2712 2713 2714 2715 2716 2717 2718 2719 2720 2721 2722 2723 2724 2725 2726 2727 2728 2729 2730 2731 2732 2733 2734 2735 2736 2737 2738 2739 2740 2741 2742 2743 2744 2745 2746 2747 2748 2749 2750 2751 2752 2753 2754 2755 2756 2757 2758 2759 2760 2761 2762 2763 2764 2765 2766 2767 2768 2769 2770 2771 2772 2773 2774 2775 2776 2777 2778 2779 2780 2781 2782 2783 2784 2785 2786 2787 2788 2789 2790 2791 2792 2793 2794 2795 2796 2797 2798 2799 2800 2801 2802 2803 2804 2805 2806 2807 2808 2809 2810 2811 2812 2813 2814 2815 2816 2817 2818 2819 2820 2821 2822 2823 2824 2825 2826 2827 2828 2829 2830 2831 2832 2833 2834 2835 2836 2837 2838 2839 2840 2841 2842 2843 2844 2845 2846 2847 2848 2849 2850 2851 2852 2853 2854 2855 2856 2857 2858 2859 2860 2861 2862 2863 2864 2865 2866 2867 2868 2869 2870 2871 2872 2873 2874 2875 2876 2877 2878 2879 2880 2881 2882 2883 2884 2885 2886 2887 2888 2889 2890 2891 2892 2893 2894 2895 2896 2897 2898 2899 2900 2901 2902 2903 2904 2905 2906 2907 2908 2909 2910 2911 2912 2913 2914 2915 2916 2917 2918 2919 2920 2921 2922 2923 2924 2925 2926 2927 2928 2929 2930 2931 2932 2933 2934 2935 2936 2937 2938 2939 2940 2941 2942 2943 2944 2945 2946 2947 2948 2949 2950 2951 2952 2953 2954 2955 2956 2957 2958 2959 2960 2961 2962 2963 2964 2965 2966 2967 2968 2969 2970 2971 2972 2973 2974 2975 2976 2977 2978 2979 2980 2981 2982 2983 2984 2985 2986 2987 2988 2989 2990 2991 2992 2993 2994 2995 2996 2997 2998 2999 3000 3001 3002 3003 3004 3005 3006 3007 3008 3009 3010 3011 3012 3013 3014 3015 3016 3017 3018 3019 3020 3021 3022 3023 3024 3025 3026 3027 3028 3029 3030 3031 3032 3033 3034 3035 3036 3037 3038 3039 3040 3041 3042 3043 3044 3045 3046 3047 3048 3049 3050 3051 3052 3053 3054 3055 3056 3057 3058 3059 3060 3061 3062 3063 3064 3065 3066 3067 3068 3069 3070 3071 3072 3073 3074 3075 3076 3077 3078 3079 3080 3081 3082 3083 3084 3085 3086 3087 3088 3089 3090 3091 3092 3093 3094 3095 3096 3097 3098 3099 3100 3101 3102 3103 3104 3105 3106 3107 3108 3109 3110 3111 3112 3113 3114 3115 3116 3117 3118 3119 3120 3121 3122 3123 3124 3125 3126 3127 3128 3129 3130 3131 3132 3133 3134 3135 3136 3137 3138 3139 3140 3141 3142 3143 3144 3145 3146 3147 3148 3149 3150 3151 3152 3153 3154 3155 3156 3157 3158 3159 3160 3161 3162 3163 3164 3165 3166 3167 3168 3169 3170 3171 3172 3173 3174 3175 3176 3177 3178 3179 3180 3181 3182 3183 3184 3185 3186 3187 3188 3189 3190 3191 3192 3193 3194 3195 3196 3197 3198 3199 3200 3201 3202 3203 3204 3205 3206 3207 3208 3209 3210 3211 3212 3213 3214 3215 3216 3217 3218 3219 3220 3221 3222 3223 3224 3225 3226 3227 3228 3229 3230 3231 3232 3233 3234 3235 3236 3237 3238 3239 3240 3241 3242 3243 3244 3245 3246 3247 3248 3249 3250 3251 3252 3253 3254 3255 3256 3257 3258 3259 3260 3261 3262 3263 3264 3265 3266 3267 3268 3269 3270 3271 3272 3273 3274 3275 3276 3277 3278 3279 3280 3281 3282 3283 3284 3285 3286 3287 3288 3289 3290 3291 3292 3293 3294 3295 3296 3297 3298 3299 3300 3301 3302 3303 3304 3305 3306 3307 3308 3309 3310 3311 3312 3313 3314 3315 3316 3317 3318 3319 3320 3321 3322 3323 3324 3325 3326 3327 3328 3329 3330 3331 3332 3333 3334 3335 3336 3337 3338 3339 3340 3341 3342 3343 3344 3345 3346 3347 3348 3349 3350 3351 3352 3353 3354 3355 3356 3357 3358 3359 3360 3361 3362 3363 3364 3365 3366 3367 3368 3369 3370 3371 3372 3373 3374 3375 3376 3377 3378 3379 3380 3381 3382 3383 3384 3385 3386 3387 3388 3389 3390 3391 3392 3393 3394 3395 3396 3397 3398 3399 3400 3401 3402 3403 3404 3405 3406 3407 3408 3409 3410 3411 3412 3413 3414 3415 3416 3417 3418 3419 3420 3421 3422 3423 3424 3425 3426 3427 3428 3429 3430 3431 3432 3433 3434 3435 3436 3437 3438 3439 3440 3441 3442 3443 3444 3445 3446 3447 3448 3449 3450 3451 3452 3453 3454 3455 3456 3457 3458 3459 3460 3461 3462 3463 3464 3465 3466 3467 3468 3469 3470 3471 3472 3473 3474 3475 3476 3477 3478 3479 3480 3481 3482 3483 3484 3485 3486 3487 3488 3489 3490 3491 3492 3493 3494 3495 3496 3497 3498 3499 3500 3501 3502 3503 3504 3505 3506 3507 3508 3509 3510 3511 3512 3513 3514 3515 3516 3517 3518 3519 3520 3521 3522 3523 3524 3525 3526 3527 3528 3529 3530 3531 3532 3533 3534 3535 3536 3537 3538 3539 3540 3541 3542 3543 3544 3545 3546 3547 3548 3549 3550 3551 3552 3553 3554 3555 3556 3557 3558 3559 3560 3561 3562 3563 3564 3565 3566 3567 3568 3569 3570 3571 3572 3573 3574 3575 3576 3577 3578 3579 3580 3581 3582 3583 3584 3585 3586 3587 3588 3589 3590 3591 3592 3593 3594 3595 3596 3597 3598 3599 3600 3601 3602 3603 3604 3605 3606 3607 3608 3609 3610 3611 3612 3613 3614 3615 3616 3617 3618 3619 3620 3621 3622 3623 3624 3625 3626 3627 3628 3629 3630 3631 3632 3633 3634 3635 3636 3637 3638 3639 3640 3641 3642 3643 3644 3645 3646 3647 3648 3649 3650 3651 3652 3653 3654 3655 3656 3657 3658 3659 3660 3661 3662 3663 3664 3665 3666 3667 3668 3669 3670 3671 3672 3673 3674 3675 3676 3677 3678 3679 3680 3681 3682 3683 3684 3685 3686 3687 3688 3689 3690 3691 3692 3693 3694 3695 3696 3697 3698 3699 3700 3701 3702 3703 3704 3705 3706 3707 3708 3709 3710 3711 3712 3713 3714 3715 3716 3717 3718 3719 3720 3721 3722 3723 3724 3725 3726 3727 3728 3729 3730 3731 3732 3733 3734 3735 3736 3737 3738 3739 3740 3741 3742 3743 3744 3745 3746 3747 3748 3749 3750 3751 3752 3753 3754 3755 3756 3757 3758 3759 3760 3761 3762 3763 3764 3765 3766 3767 3768 3769 3770 3771 3772 3773 3774 3775 3776 3777 3778 3779 3780 3781 3782 3783 3784 3785 3786 3787 3788 3789 3790 3791 3792 3793 3794 3795 3796 3797 3798 3799 3800 3801 3802 3803 3804 3805 3806 3807 3808 3809 3810 3811 3812 3813 3814 3815 3816 3817 3818 3819 3820 3821 3822 3823 3824 3825 3826 3827 3828 3829 3830 3831 3832 3833 3834 3835 3836 3837 3838 3839 3840 3841 3842 3843 3844 3845 3846 3847 3848 3849 3850 3851 3852 3853 3854 3855 3856 3857 3858 3859 3860 3861 3862 3863 3864 3865 3866 3867 3868 3869 3870 3871 3872 3873 3874 3875 3876 3877 3878 3879 3880 3881 3882 3883 3884 3885 3886 3887 3888 3889 3890 3891 3892 3893 3894 3895 3896 3897 3898 3899 3900 3901 3902 3903 3904 3905 3906 3907 3908 3909 3910 3911 3912 3913 3914 3915 3916 3917 3918 3919 3920 3921 3922 3923 3924 3925 3926 3927 3928 3929 3930 3931 3932 3933 3934 3935 3936 3937 3938 3939 3940 3941 3942 3943 3944 3945 3946 3947 3948 3949 3950 3951 3952 3953 3954 3955 3956 3957 3958 3959 3960 3961 3962 3963 3964 3965 3966 3967 3968 3969 3970 3971 3972 3973 3974 3975 3976 3977 3978 3979 3980 3981 3982 3983 3984 3985 3986 3987 3988 3989 3990 3991 3992 3993 3994 3995 3996 3997 3998 3999 4000 4001 4002 4003 4004 4005 4006 4007 4008 4009 4010 4011 4012 4013 4014 4015 4016 4017 4018 4019 4020 4021 4022 4023 4024 4025 4026 4027 4028 4029 4030 4031 4032 4033 4034 4035 4036 4037 4038 4039 4040 4041 4042 4043 4044 4045 4046 4047 4048 4049 4050 4051 4052 4053 4054 4055 4056 4057 4058 4059 4060 4061 4062 4063 4064 4065 4066 4067 4068 4069 4070 4071 4072 4073 4074 4075 4076 4077 4078 4079 4080 4081 4082 4083 4084 4085 4086 4087 4088 4089 4090 4091 4092 4093 4094 4095 4096 4097 4098 4099 4100 4101 4102 4103 4104 4105 4106 4107 4108 4109 4110 4111 4112 4113 4114 4115 4116 4117 4118 4119 4120 4121 4122 4123 4124 4125 4126 4127 4128 4129 4130 4131 4132 4133 4134 4135 4136 4137 4138 4139 4140 4141 4142 4143 4144 4145 4146 4147 4148 4149 4150 4151 4152 4153 4154 4155 4156 4157 4158 4159 4160 4161 4162 4163 4164 4165 4166 4167 4168 4169 4170 4171 4172 4173 4174 4175 4176 4177 4178 4179 4180 4181 4182 4183 4184 4185 4186 4187 4188 4189 4190 4191 4192 4193 4194 4195 4196 4197 4198 4199 4200 4201 4202 4203 4204 4205 4206 4207 4208 4209 4210 4211 4212 4213 4214 4215 4216 4217 4218 4219 4220 4221 4222 4223 4224 4225 4226 4227 4228 4229 4230 4231 4232 4233 4234 4235 4236 4237 4238 4239 4240 4241 4242 4243 4244 4245 4246 4247 4248 4249 4250 4251 4252 4253 4254 4255 4256 4257 4258 4259 4260 4261 4262 4263 4264 4265 4266 4267 4268 4269 4270 4271 4272 4273 4274 4275 4276 4277 4278 4279 4280 4281 4282 4283 4284 4285 4286 4287 4288 4289 4290 4291 4292 4293 4294 4295 4296 4297 4298 4299 4300 4301 4302 4303 4304 4305 4306 4307 4308 4309 4310 4311 4312 4313 4314 4315 4316 4317 4318 4319 4320 4321 4322 4323 4324 4325 4326 4327 4328 4329 4330 4331 4332 4333 4334 4335 4336 4337 4338 4339 4340 4341 4342 4343 4344 4345 4346 4347 4348 4349 4350 4351 4352 4353 4354 4355 4356 4357 4358 4359 4360 4361 4362 4363 4364 4365 4366 4367 4368 4369 4370 4371 4372 4373 4374 4375 4376 4377 4378 4379 4380 4381 4382 4383 4384 4385 4386 4387 4388 4389 4390 4391 4392 4393 4394 4395 4396 4397 4398 4399 4400 4401 4402 4403 4404 4405 4406 4407 4408 4409 4410 4411 4412 4413 4414 4415 4416 4417 4418 4419 4420 4421 4422 4423 4424 4425 4426 4427 4428 4429 4430 4431 4432 4433 4434 4435 4436 4437 4438 4439 4440 4441 4442 4443 4444 4445 4446 4447 4448 4449 4450 4451 4452 4453 4454 4455 4456 4457 4458 4459 4460 4461 4462 4463 4464 4465 4466 4467 4468 4469 4470 4471 4472 4473 4474 4475 4476 4477 4478 4479 4480 4481 4482 4483 4484 4485 4486 4487 4488 4489 4490 4491 4492 4493 4494 4495 4496 4497 4498 4499 4500 4501 4502 4503 4504 4505 4506 4507 4508 4509 4510 4511 4512 4513 4514 4515 4516 4517 4518 4519 4520 4521 4522 4523 4524 4525 4526 4527 4528 4529 4530 4531 4532 4533 4534 4535 4536 4537 4538 4539 4540 4541 4542 4543 4544 4545 4546 4547 4548 4549 4550 4551 4552 4553 4554 4555 4556 4557 4558 4559 4560 4561 4562 4563 4564 4565 4566 4567 4568 4569 4570 4571 4572 4573 4574 4575 4576 4577 4578 4579 4580 4581 4582 4583 4584 4585 4586 4587 4588 4589 4590 4591 4592 4593 4594 4595 4596 4597 4598 4599 4600 4601 4602 4603 4604 4605 4606 4607 4608 4609 4610 4611 4612 4613 4614 4615 4616 4617 4618 4619 4620 4621 4622 4623 4624 4625 4626 4627 4628 4629 4630 4631 4632 4633 4634 4635 4636 4637 4638 4639 4640 4641 4642 4643 4644 4645 4646 4647 4648 4649 4650 4651 4652 4653 4654 4655 4656 4657 4658 4659 4660 4661 4662 4663 4664 4665 4666 4667 4668 4669 4670 4671 4672 4673 4674 4675 4676 4677 4678 4679 4680 4681 4682 4683 4684 4685 4686 4687 4688 4689 4690 4691 4692 4693 4694 4695 4696 4697 4698 4699 4700 4701 4702 4703 4704 4705 4706 4707 4708 4709 4710 4711 4712 4713 4714 4715 4716 4717 4718 4719 4720 4721 4722 4723 4724 4725 4726 4727 4728 4729 4730 4731 4732 4733 4734 4735 4736 4737 4738 4739 4740 4741 4742 4743 4744 4745 4746 4747 4748 4749 4750 4751 4752 4753 4754 4755 4756 4757 4758 4759 4760 4761 4762 4763 4764 4765 4766 4767 4768 4769 4770 4771 4772 4773 4774 4775 4776 4777 4778 4779 4780 4781 4782 4783 4784 4785 4786 4787 4788 4789 4790 4791 4792 4793 4794 4795 4796 4797 4798 4799 4800 4801 4802 4803 4804 4805 4806 4807 4808 4809 4810 4811 4812 4813 4814 4815 4816 4817 4818 4819 4820 4821 4822 4823 4824 4825 4826 4827 4828 4829 4830 4831 4832 4833 4834 4835 4836 4837 4838 4839 4840 4841 4842 4843 4844 4845 4846 4847 4848 4849 4850 4851 4852 4853 4854 4855 4856 4857 4858 4859 4860 4861 4862 4863 4864 4865 4866 4867 4868 4869 4870 4871 4872 4873 4874 4875 4876 4877 4878 4879 4880 4881 4882 4883 4884 4885 4886 4887 4888 4889 4890 4891 4892 4893 4894 4895 4896 4897 4898 4899 4900 4901 4902 4903 4904 4905 4906 4907 4908 4909 4910 4911 4912 4913 4914 4915 4916 4917 4918 4919 4920 4921 4922 4923 4924 4925 4926 4927 4928 4929 4930 4931 4932 4933 4934 4935 4936 4937 4938 4939 4940 4941 4942 4943 4944 4945 4946 4947 4948 4949 4950 4951 4952 4953 4954 4955 4956 4957 4958 4959 4960 4961 4962 4963 4964 4965 4966 4967 4968 4969 4970 4971 4972 4973 4974 4975 4976 4977 4978 4979 4980 4981 4982 4983 4984 4985 4986 4987 4988 4989 4990 4991 4992 4993 4994 4995 4996 4997 4998 4999 5000 5001 5002 5003 5004 5005 5006 5007 5008 5009 5010 5011 5012 5013 5014 5015 5016 5017 5018 5019 5020 5021 5022 5023 5024 5025 5026 5027 5028 5029 5030 5031 5032 5033 5034 5035 5036 5037 5038 5039 5040 5041 5042 5043 5044 5045 5046 5047 5048 5049 5050 5051 5052 5053 5054 5055 5056 5057 5058 5059 5060 5061 5062 5063 5064 5065 5066 5067 5068 5069 5070 5071 5072 5073 5074 5075 5076 5077 5078 5079 5080 5081 5082 5083 5084 5085 5086 5087 5088 5089 5090 5091 5092 5093 5094 5095 5096 5097 5098 5099 5100 5101 5102 5103 5104 5105 5106 5107 5108 5109 5110 5111 5112 5113 5114 5115 5116 5117 5118 5119 5120 5121 5122 5123 5124 5125 5126 5127 5128 5129 5130 5131 5132 5133 5134 5135 5136 5137 5138 5139 5140 5141 5142 5143 5144 5145 5146 5147 5148 5149 5150 5151 5152 5153 5154 5155 5156 5157 5158 5159 5160 5161 5162 5163 5164 5165 5166 5167 5168 5169 5170 5171 5172 5173 5174 5175 5176 5177 5178 5179 5180 5181 5182 5183 5184 5185 5186 5187 5188 5189 5190 5191 5192 5193 5194 5195 5196 5197 5198 5199 5200 5201 5202 5203 5204 5205 5206 5207 5208 5209 5210 5211 5212 5213 5214 5215 5216 5217 5218 5219 5220 5221 5222 5223 5224 5225 5226 5227 5228 5229 5230 5231 5232 5233 5234 5235 5236 5237 5238 5239 5240 5241 5242 5243 5244 5245 5246 5247 5248 5249 5250 5251 5252 5253 5254 5255 5256 5257 5258 5259 5260 5261 5262 5263 5264 5265 5266 5267 5268 5269 5270 5271 5272 5273 5274 5275 5276 5277 5278 5279 5280 5281 5282 5283 5284 5285 5286 5287 5288 5289 5290 5291 5292 5293 5294 5295 5296 5297 5298 5299 5300 5301 5302 5303 5304 5305 5306 5307 5308 5309 5310 5311 5312 5313 5314 5315 5316 5317 5318 5319 5320 5321 5322 5323 5324 5325 5326 5327 5328 5329 5330 5331 5332 5333 5334 5335 5336 5337 5338 5339 5340 5341 5342 5343 5344 5345 5346 5347 5348 5349 5350 5351 5352 5353 5354 5355 5356 5357 5358 5359 5360 5361 5362 5363 5364 5365 5366 5367 5368 5369 5370 5371 5372 5373 5374 5375 5376 5377 5378 5379 5380 5381 5382 5383 5384 5385 5386 5387 5388 5389 5390 5391 5392 5393 5394 5395 5396 5397 5398 5399 5400 5401 5402 5403 5404 5405 5406 5407 5408 5409 5410 5411 5412 5413 5414 5415 5416 5417 5418 5419 5420 5421 5422 5423 5424 5425 5426 5427 5428 5429 5430 5431 5432 5433 5434 5435 5436 5437 5438 5439 5440 5441 5442 5443 5444 5445 5446 5447 5448 5449 5450 5451 5452 5453 5454 5455 5456 5457 5458 5459 5460 5461 5462 5463 5464 5465 5466 5467 5468 5469 5470 5471 5472 5473 5474 5475 5476 5477 5478 5479 5480 5481 5482 5483 5484 5485 5486 5487 5488 5489 5490 5491 5492 5493 5494 5495 5496 5497 5498 5499 5500 5501 5502 5503 5504 5505 5506 5507 5508 5509 5510 5511 5512 5513 5514 5515 5516 5517 5518 5519 5520 5521 5522 5523 5524 5525 5526 5527 5528 5529 5530 5531 5532 5533 5534 5535 5536 5537 5538 5539 5540 5541 5542 5543 5544 5545 5546 5547 5548 5549 5550 5551 5552 5553 5554 5555 5556 5557 5558 5559 5560 5561 5562 5563 5564 5565 5566 5567 5568 5569 5570 5571 5572 5573 5574 5575 5576 5577 5578 5579 5580 5581 5582 5583 5584 5585 5586 5587 5588 5589 5590 5591 5592 5593 5594 5595 5596 5597 5598 5599 5600 5601 5602 5603 5604 5605 5606 5607 5608 5609 5610 5611 5612 5613 5614 5615 5616 5617 5618 5619 5620 5621 5622 5623 5624 5625 5626 5627 5628 5629 5630 5631 5632 5633 5634 5635 5636 5637 5638 5639 5640 5641 5642 5643 5644 5645 5646 5647 5648 5649 5650 5651 5652 5653 5654 5655 5656 5657 5658 5659 5660 5661 5662 5663 5664 5665 5666 5667 5668 5669 5670 5671 5672 5673 5674 5675 5676 5677 5678 5679 5680 5681 5682 5683 5684 5685 5686 5687 5688 5689 5690 5691 5692 5693 5694 5695 5696 5697 5698 5699 5700 5701 5702 5703 5704 5705 5706 5707 5708 5709 5710 5711 5712 5713 5714 5715 5716 5717 5718 5719 5720 5721 5722 5723 5724 5725 5726 5727 5728 5729 5730 5731 5732 5733 5734 5735 5736 5737 5738 5739 5740 5741 5742 5743 5744 5745 5746 5747 5748 5749 5750 5751 5752 5753 5754 5755 5756 5757 5758 5759 5760 5761 5762 5763 5764 5765 5766 5767 5768 5769 5770 5771 5772 5773 5774 5775 5776 5777 5778 5779 5780 5781 5782 5783 5784 5785 5786 5787 5788 5789 5790 5791 5792 5793 5794 5795 5796 5797 5798 5799 5800 5801 5802 5803 5804 5805 5806 5807 5808 5809 5810 5811 5812 5813 5814 5815 5816 5817 5818 5819 5820 5821 5822 5823 5824 5825 5826 5827 5828 5829 5830 5831 5832 5833 5834 5835 5836 5837 5838 5839 5840 5841 5842 5843 5844 5845 5846 5847 5848 5849 5850 5851 5852 5853 5854 5855 5856 5857 5858 5859 5860 5861 5862 5863 5864 5865 5866 5867 5868 5869 5870 5871 5872 5873 5874 5875 5876 5877 5878 5879 5880 5881 5882 5883 5884 5885 5886 5887 5888 5889 5890 5891 5892 5893 5894 5895 5896 5897 5898 5899 5900 5901 5902 5903 5904 5905 5906 5907 5908 5909 5910 5911 5912 5913 5914 5915 5916 5917 5918 5919 5920 5921 5922 5923 5924 5925 5926 5927 5928 5929 5930 5931 5932 5933 5934 5935 5936 5937 5938 5939 5940 5941 5942 5943 5944 5945 5946 5947 5948 5949 5950 5951 5952 5953 5954 5955 5956 5957 5958 5959 5960 5961 5962 5963 5964 5965 5966 5967 5968 5969 5970 5971 5972 5973 5974 5975 5976 5977 5978 5979 5980 5981 5982 5983 5984 5985 5986 5987 5988 5989 5990 5991 5992 5993 5994 5995 5996 5997 5998 5999 6000 6001 6002 6003 6004 6005 6006 6007 6008 6009 6010 6011 6012 6013 6014 6015 6016 6017 6018 6019 6020 6021 6022 6023 6024 6025 6026 6027 6028 6029 6030 6031 6032 6033 6034 6035 6036 6037 6038 6039 6040 6041 6042 6043 6044 6045 6046 6047 6048 6049 6050 6051 6052 6053 6054 6055 6056 6057 6058 6059 6060 6061 6062 6063 6064 6065 6066 6067 6068 6069 6070 6071 6072 6073 6074 6075 6076 6077 6078 6079 6080 6081 6082 6083 6084 6085 6086 6087 6088 6089 6090 6091 6092 6093 6094 6095 6096 6097 6098 6099 6100 6101 6102 6103 6104 6105 6106 6107 6108 6109 6110 6111 6112 6113 6114 6115 6116 6117 6118 6119 6120 6121 6122 6123 6124 6125 6126 6127 6128 6129 6130 6131 6132 6133 6134 6135 6136 6137 6138 6139 6140 6141 6142 6143 6144 6145 6146 6147 6148 6149 6150 6151 6152 6153 6154 6155 6156 6157 6158 6159 6160 6161 6162 6163 6164 6165 6166 6167 6168 6169 6170 6171 6172 6173 6174 6175 6176 6177 6178 6179 6180 6181 6182 6183 6184 6185 6186 6187 6188 6189 6190 6191 6192 6193 6194 6195 6196 6197 6198 6199 6200 6201 6202 6203 6204 6205 6206 6207 6208 6209 6210 6211 6212 6213 6214 6215 6216 6217 6218 6219 6220 6221 6222 6223 6224 6225 6226 6227 6228 6229 6230 6231 6232 6233 6234 6235 6236 6237 6238 6239 6240 6241 6242 6243 6244 6245 6246 6247 6248 6249 6250 6251 6252 6253 6254 6255 6256 6257 6258 6259 6260 6261 6262 6263 6264 6265 6266 6267 6268 6269 6270 6271 6272 6273 6274 6275 6276 6277 6278 6279 6280 6281 6282 6283 6284 6285 6286 6287 6288 6289 6290 6291 6292 6293 6294 6295 6296 6297 6298 6299 6300 6301 6302 6303 6304 6305 6306 6307 6308 6309 6310 6311 6312 6313 6314 6315 6316 6317 6318 6319 6320 6321 6322 6323 6324 6325 6326 6327 6328 6329 6330 6331 6332 6333 6334 6335 6336 6337 6338 6339 6340 6341 6342 6343 6344 6345 6346 6347 6348 6349 6350 6351 6352 6353 6354 6355 6356 6357 6358 6359 6360 6361 6362 6363 6364 6365 6366 6367 6368 6369 6370 6371 6372 6373 6374 6375 6376 6377 6378 6379 6380 6381 6382 6383 6384 6385 6386 6387 6388 6389 6390 6391 6392 6393 6394 6395 6396 6397 6398 6399 6400 6401 6402 6403 6404 6405 6406 6407 6408 6409 6410 6411 6412 6413 6414 6415 6416 6417 6418 6419 6420 6421 6422 6423 6424 6425 6426 6427 6428 6429 6430 6431 6432 6433 6434 6435 6436 6437 6438 6439 6440 6441 6442 6443 6444 6445 6446 6447 6448 6449 6450 6451 6452 6453 6454 6455 6456 6457 6458 6459 6460 6461 6462 6463 6464 6465 6466 6467 6468 6469 6470 6471 6472 6473 6474 6475 6476 6477 6478 6479 6480 6481 6482 6483 6484 6485 6486 6487 6488 6489 6490 6491 6492 6493 6494 6495 6496 6497 6498 6499 6500 6501 6502 6503 6504 6505 6506 6507 6508 6509 6510 6511 6512 6513 6514 6515 6516 6517 6518 6519 6520 6521 6522 6523 6524 6525 6526 6527 6528 6529 6530 6531 6532 6533 6534 6535 6536 6537 6538 6539 6540 6541 6542 6543 6544 6545 6546 6547 6548 6549 6550 6551 6552 6553 6554 6555 6556 6557 6558 6559 6560 6561 6562 6563 6564 6565 6566 6567 6568 6569 6570 6571 6572 6573 6574 6575 6576 6577 6578 6579 6580 6581 6582 6583 6584 6585 6586 6587 6588 6589 6590 6591 6592 6593 6594 6595 6596 6597 6598 6599 6600 6601 6602 6603 6604 6605 6606 6607 6608 6609 6610 6611 6612 6613 6614 6615 6616 6617 6618 6619 6620 6621 6622 6623 6624 6625 6626 6627 6628 6629 6630 6631 6632 6633 6634 6635 6636 6637 6638 6639 6640 6641 6642 6643 6644 6645 6646 6647 6648 6649 6650 6651 6652 6653 6654 6655 6656 6657 6658 6659 6660 6661 6662 6663 6664 6665 6666 6667 6668 6669 6670 6671 6672 6673 6674 6675 6676 6677 6678 6679 6680 6681 6682 6683 6684 6685 6686 6687 6688 6689 6690 6691 6692 6693 6694 6695 6696 6697 6698 6699 6700 6701 6702 6703 6704 6705 6706 6707 6708 6709 6710 6711 6712 6713 6714 6715 6716 6717 6718 6719 6720 6721 6722 6723 6724 6725 6726 6727 6728 6729 6730 6731 6732 6733 6734 6735 6736 6737 6738 6739 6740 6741 6742 6743 6744 6745 6746 6747 6748 6749 6750 6751 6752 6753 6754 6755 6756 6757 6758 6759 6760 6761 6762 6763 6764 6765 6766 6767 6768 6769 6770 6771 6772 6773 6774 6775 6776 6777 6778 6779 6780 6781 6782 6783 6784 6785 6786 6787 6788 6789 6790 6791 6792 6793 6794 6795 6796 6797 6798 6799 6800 6801 6802 6803 6804 6805 6806 6807 6808 6809 6810 6811 6812 6813 6814 6815 6816 6817 6818 6819 6820 6821 6822 6823 6824 6825 6826 6827 6828 6829 6830 6831 6832 6833 6834 6835 6836 6837 6838 6839 6840 6841 6842 6843 6844 6845 6846 6847 6848 6849 6850 6851 6852 6853 6854 6855 6856 6857 6858 6859 6860 6861 6862 6863 6864 6865 6866 6867 6868 6869 6870 6871 6872 6873 6874 6875 6876 6877 6878 6879 6880 6881 6882 6883 6884 6885 6886 6887 6888 6889 6890 6891 6892 6893 6894 6895 6896 6897 6898 6899 6900 6901 6902 6903 6904 6905 6906 6907 6908 6909 6910 6911 6912 6913 6914 6915 6916 6917 6918 6919 6920 6921 6922 6923 6924 6925 6926 6927 6928 6929 6930 6931 6932 6933 6934 6935 6936 6937 6938 6939 6940 6941 6942 6943 6944 6945 6946 6947 6948 6949 6950 6951 6952 6953 6954 6955 6956 6957 6958 6959 6960 6961 6962 6963 6964 6965 6966 6967 6968 6969 6970 6971 6972 6973 6974 6975 6976 6977 6978 6979 6980 6981 6982 6983 6984 6985 6986 6987 6988 6989 6990 6991 6992 6993 6994 6995 6996 6997 6998 6999 7000 7001 7002 7003 7004 7005 7006 7007 7008 7009 7010 7011 7012 7013 7014 7015 7016 7017 7018 7019 7020 7021 7022 7023 7024 7025 7026 7027 7028 7029 7030 7031 7032 7033 7034 7035 7036 7037 7038 7039 7040 7041 7042 7043 7044 7045 7046 7047 7048 7049 7050 7051 7052 7053 7054 7055 7056 7057 7058 7059 7060 7061 7062 7063 7064 7065 7066 7067 7068 7069 7070 7071 7072 7073 7074 7075 7076 7077 7078 7079 7080 7081 7082 7083 7084 7085 7086 7087 7088 7089 7090 7091 7092 7093 7094 7095 7096 7097 7098 7099 7100 7101 7102 7103 7104 7105 7106 7107 7108 7109 7110 7111 7112 7113 7114 7115 7116 7117 7118 7119 7120 7121 7122 7123 7124 7125 7126 7127 7128 7129 7130 7131 7132 7133 7134 7135 7136 7137 7138 7139 7140 7141 7142 7143 7144 7145 7146 7147 7148 7149 7150 7151 7152 7153 7154 7155 7156 7157 7158 7159 7160 7161 7162 7163 7164 7165 7166 7167 7168 7169 7170 7171 7172 7173 7174 7175 7176 7177 7178 7179 7180 7181 7182 7183 7184 7185 7186 7187 7188 7189 7190 7191 7192 7193 7194 7195 7196 7197 7198 7199 7200 7201 7202 7203 7204 7205 7206 7207 7208 7209 7210 7211 7212 7213 7214 7215 7216 7217 7218 7219 7220 7221 7222 7223 7224 7225 7226 7227 7228 7229 7230 7231 7232 7233 7234 7235 7236 7237 7238 7239 7240 7241 7242 7243 7244 7245 7246 7247 7248 7249 7250 7251 7252 7253 7254 7255 7256 7257 7258 7259 7260 7261 7262 7263 7264 7265 7266 7267 7268 7269 7270 7271 7272 7273 7274 7275 7276 7277 7278 7279 7280 7281 7282 7283 7284 7285 7286 7287 7288 7289 7290 7291 7292 7293 7294 7295 7296 7297 7298 7299 7300 7301 7302 7303 7304 7305 7306 7307 7308 7309 7310 7311 7312 7313 7314 7315 7316 7317 7318 7319 7320 7321 7322 7323 7324 7325 7326 7327 7328 7329 7330 7331 7332 7333 7334 7335 7336 7337 7338 7339 7340 7341 7342 7343 7344 7345 7346 7347 7348 7349 7350 7351 7352 7353 7354 7355 7356 7357 7358 7359 7360 7361 7362 7363 7364 7365 7366 7367 7368 7369 7370 7371 7372 7373 7374 7375 7376 7377 7378 7379 7380 7381 7382 7383 7384 7385 7386 7387 7388 7389 7390 7391 7392 7393 7394 7395 7396 7397 7398 7399 7400 7401 7402 7403 7404 7405 7406 7407 7408 7409 7410 7411 7412 7413 7414 7415 7416 7417 7418 7419 7420 7421 7422 7423 7424 7425 7426 7427 7428 7429 7430 7431 7432 7433 7434 7435 7436 7437 7438 7439 7440 7441 7442 7443 7444 7445 7446 7447 7448 7449 7450 7451 7452 7453 7454 7455 7456 7457 7458 7459 7460 7461 7462 7463 7464 7465 7466 7467 7468 7469 7470 7471 7472 7473 7474 7475 7476 7477 7478 7479 7480 7481 7482 7483 7484 7485 7486 7487 7488 7489 7490 7491 7492 7493 7494 7495 7496 7497 7498 7499 7500 7501 7502 7503 7504 7505 7506 7507 7508 7509 7510 7511 7512 7513 7514 7515 7516 7517 7518 7519 7520 7521 7522 7523 7524 7525 7526 7527 7528 7529 7530 7531 7532 7533 7534 7535 7536 7537 7538 7539 7540 7541 7542 7543 7544 7545 7546 7547 7548 7549 7550 7551 7552 7553 7554 7555 7556 7557 7558 7559 7560 7561 7562 7563 7564 7565 7566 7567 7568 7569 7570 7571 7572 7573 7574 7575 7576 7577 7578 7579 7580 7581 7582 7583 7584 7585 7586 7587 7588 7589 7590 7591 7592 7593 7594 7595 7596 7597 7598 7599 7600 7601 7602 7603 7604 7605 7606 7607 7608 7609 7610 7611 7612 7613 7614 7615 7616 7617 7618 7619 7620 7621 7622 7623 7624 7625 7626 7627 7628 7629 7630 7631 7632 7633 7634 7635 7636 7637 7638 7639 7640 7641 7642 7643 7644 7645 7646 7647 7648 7649 7650 7651 7652 7653 7654 7655 7656 7657 7658 7659 7660 7661 7662 7663 7664 7665 7666 7667 7668 7669 7670 7671 7672 7673 7674 7675 7676 7677 7678 7679 7680 7681 7682 7683 7684 7685 7686 7687 7688 7689 7690 7691 7692 7693 7694 7695 7696 7697 7698 7699 7700 7701 7702 7703 7704 7705 7706 7707 7708 7709 7710 7711 7712 7713 7714 7715 7716 7717 7718 7719 7720 7721 7722 7723 7724 7725 7726 7727 7728 7729 7730 7731 7732 7733 7734 7735 7736 7737 7738 7739 7740 7741 7742 7743 7744 7745 7746 7747 7748 7749 7750 7751 7752 7753 7754 7755 7756 7757 7758 7759 7760 7761 7762 7763 7764 7765 7766 7767 7768 7769 7770 7771 7772 7773 7774 7775 7776 7777 7778 7779 7780 7781 7782 7783 7784 7785 7786 7787 7788 7789 7790 7791 7792 7793 7794 7795 7796 7797 7798 7799 7800 7801 7802 7803 7804 7805 7806 7807 7808 7809 7810 7811 7812 7813 7814 7815 7816 7817 7818 7819 7820 7821 7822 7823 7824 7825 7826 7827 7828 7829 7830 7831 7832 7833 7834 7835 7836 7837 7838 7839 7840 7841 7842 7843 7844 7845 7846 7847 7848 7849 7850 7851 7852 7853 7854 7855 7856 7857 7858 7859 7860 7861 7862 7863 7864 7865 7866 7867 7868 7869 7870 7871 7872 7873 7874 7875 7876 7877 7878 7879 7880 7881 7882 7883 7884 7885 7886 7887 7888 7889 7890 7891 7892 7893 7894 7895 7896 7897 7898 7899 7900 7901 7902 7903 7904 7905 7906 7907 7908 7909 7910 7911 7912 7913 7914 7915 7916 7917 7918 7919 7920 7921 7922 7923 7924 7925 7926 7927 7928 7929 7930 7931 7932 7933 7934 7935 7936 7937 7938 7939 7940 7941 7942 7943 7944 7945 7946 7947 7948 7949 7950 7951 7952 7953 7954 7955 7956 7957 7958 7959 7960 7961 7962 7963 7964 7965 7966 7967 7968 7969 7970 7971 7972 7973 7974 7975 7976 7977 7978 7979 7980 7981 7982 7983 7984 7985 7986 7987 7988 7989 7990 7991 7992 7993 7994 7995 7996 7997 7998 7999 8000 8001 8002 8003 8004 8005 8006 8007 8008 8009 8010 8011 8012 8013 8014 8015 8016 8017 8018 8019 8020 8021 8022 8023 8024 8025 8026 8027 8028 8029 8030 8031 8032 8033 8034 8035 8036 8037 8038 8039 8040 8041 8042 8043 8044 8045 8046 8047 8048 8049 8050 8051 8052 8053 8054 8055 8056 8057 8058 8059 8060 8061 8062 8063 8064 8065 8066 8067 8068 8069 8070 8071 8072 8073 8074 8075 8076 8077 8078 8079 8080 8081 8082 8083 8084 8085 8086 8087 8088 8089 8090 8091 8092 8093 8094 8095 8096 8097 8098 8099 8100 8101 8102 8103 8104 8105 8106 8107 8108 8109 8110 8111 8112 8113 8114 8115 8116 8117 8118 8119 8120 8121 8122 8123 8124 8125 8126 8127 8128 8129 8130 8131 8132 8133 8134 8135 8136 8137 8138 8139 8140 8141 8142 8143 8144 8145 8146 8147 8148 8149 8150 8151 8152 8153 8154 8155 8156 8157 8158 8159 8160 8161 8162 8163 8164 8165 8166 8167 8168 8169 8170 8171 8172 8173 8174 8175 8176 8177 8178 8179 8180 8181 8182 8183 8184 8185 8186 8187 8188 8189 8190 8191 8192 8193 8194 8195 8196 8197 8198 8199 8200 8201 8202 8203 8204 8205 8206 8207 8208 8209 8210 8211 8212 8213 8214 8215 8216 8217 8218 8219 8220 8221 8222 8223 8224 8225 8226 8227 8228 8229 8230 8231 8232 8233 8234 8235 8236 8237 8238 8239 8240 8241 8242 8243 8244 8245 8246 8247 8248 8249 8250 8251 8252 8253 8254 8255 8256 8257 8258 8259 8260 8261 8262 8263 8264 8265 8266 8267 8268 8269 8270 8271 8272 8273 8274 8275 8276 8277 8278 8279 8280 8281 8282 8283 8284 8285 8286 8287 8288 8289 8290 8291 8292 8293 8294 8295 8296 8297 8298 8299 8300 8301 8302 8303 8304 8305 8306 8307 8308 8309 8310 8311 8312 8313 8314 8315 8316 8317 8318 8319 8320 8321 8322 8323 8324 8325 8326 8327 8328 8329 8330 8331 8332 8333 8334 8335 8336 8337 8338 8339 8340 8341 8342 8343 8344 8345 8346 8347 8348 8349 8350 8351 8352 8353 8354 8355 8356 8357 8358 8359 8360 8361 8362 8363 8364 8365 8366 8367 8368 8369 8370 8371 8372 8373 8374 8375 8376 8377 8378 8379 8380 8381 8382 8383 8384 8385 8386 8387 8388 8389 8390 8391 8392 8393 8394 8395 8396 8397 8398 8399 8400 8401 8402 8403 8404 8405 8406 8407 8408 8409 8410 8411 8412 8413 8414 8415 8416 8417 8418 8419 8420 8421 8422 8423 8424 8425 8426 8427 8428 8429 8430 8431 8432 8433 8434 8435 8436 8437 8438 8439 8440 8441 8442 8443 8444 8445 8446 8447 8448 8449 8450 8451 8452 8453 8454 8455 8456 8457 8458 8459 8460 8461 8462 8463 8464 8465 8466 8467 8468 8469 8470 8471 8472 8473 8474 8475 8476 8477 8478 8479 8480 8481 8482 8483 8484 8485 8486 8487 8488 8489 8490 8491 8492 8493 8494 8495 8496 8497 8498 8499 8500 8501 8502 8503 8504 8505 8506 8507 8508 8509 8510 8511 8512 8513 8514 8515 8516 8517 8518 8519 8520 8521 8522 8523 8524 8525 8526 8527 8528 8529 8530 8531 8532 8533 8534 8535 8536 8537 8538 8539 8540 8541 8542 8543 8544 8545 8546 8547 8548 8549 8550 8551 8552 8553 8554 8555 8556 8557 8558 8559 8560 8561 8562 8563 8564 8565 8566 8567 8568 8569 8570 8571 8572 8573 8574 8575 8576 8577 8578 8579 8580 8581 8582 8583 8584 8585 8586 8587 8588 8589 8590 8591 8592 8593 8594 8595 8596 8597 8598 8599 8600 8601 8602 8603 8604 8605 8606 8607 8608 8609 8610 8611 8612 8613 8614 8615 8616 8617 8618 8619 8620 8621 8622 8623 8624 8625 8626 8627 8628 8629 8630 8631 8632 8633 8634 8635 8636 8637 8638 8639 8640 8641 8642 8643 8644 8645 8646 8647 8648 8649 8650 8651 8652 8653 8654 8655 8656 8657 8658 8659 8660 8661 8662 8663 8664 8665 8666 8667 8668 8669 8670 8671 8672 8673 8674 8675 8676 8677 8678 8679 8680 8681 8682 8683 8684 8685 8686 8687 8688 8689 8690 8691 8692 8693 8694 8695 8696 8697 8698 8699 8700 8701 8702 8703 8704 8705 8706 8707 8708 8709 8710 8711 8712 8713 8714 8715 8716 8717 8718 8719 8720 8721 8722 8723 8724 8725 8726 8727 8728 8729 8730 8731 8732 8733 8734 8735 8736 8737 8738 8739 8740 8741 8742 8743 8744 8745 8746 8747 8748 8749 8750 8751 8752 8753 8754 8755 8756 8757 8758 8759 8760 8761 8762 8763 8764 8765 8766 8767 8768 8769 8770 8771 8772 8773 8774 8775 8776 8777 8778 8779 8780 8781 8782 8783 8784 8785 8786 8787 8788 8789 8790 8791 8792 8793 8794 8795 8796 8797 8798 8799 8800 8801 8802 8803 8804 8805 8806 8807 8808 8809 8810 8811 8812 8813 8814 8815 8816 8817 8818 8819 8820 8821 8822 8823 8824 8825 8826 8827 8828 8829 8830 8831 8832 8833 8834 8835 8836 8837 8838 8839 8840 8841 8842 8843 8844 8845 8846 8847 8848 8849 8850 8851 8852 8853 8854 8855 8856 8857 8858 8859 8860 8861 8862 8863 8864 8865 8866 8867 8868 8869 8870 8871 8872 8873 8874 8875 8876 8877 8878 8879 8880 8881 8882 8883 8884 8885 8886 8887 8888 8889 8890 8891 8892 8893 8894 8895 8896 8897 8898 8899 8900 8901 8902 8903 8904 8905 8906 8907 8908 8909 8910 8911 8912 8913 8914 8915 8916 8917 8918 8919 8920 8921 8922 8923 8924 8925 8926 8927 8928 8929 8930 8931 8932 8933 8934 8935 8936 8937 8938 8939 8940 8941 8942 8943 8944 8945 8946 8947 8948 8949 8950 8951 8952 8953 8954 8955 8956 8957 8958 8959 8960 8961 8962 8963 8964 8965 8966 8967 8968 8969 8970 8971 8972 8973 8974 8975 8976 8977 8978 8979 8980 8981 8982 8983 8984 8985 8986 8987 8988 8989 8990 8991 8992 8993 8994 8995 8996 8997 8998 8999 9000 9001 9002 9003 9004 9005 9006 9007 9008 9009 9010 9011 9012 9013 9014 9015 9016 9017 9018 9019 9020 9021 9022 9023 9024 9025 9026 9027 9028 9029 9030 9031 9032 9033 9034 9035 9036 9037 9038 9039 9040 9041 9042 9043 9044 9045 9046 9047 9048 9049 9050 9051 9052 9053 9054 9055 9056 9057 9058 9059 9060 9061 9062 9063 9064 9065 9066 9067 9068 9069 9070 9071 9072 9073 9074 9075 9076 9077 9078 9079 9080 9081 9082 9083 9084 9085 9086 9087 9088 9089 9090 9091 9092 9093 9094 9095 9096 9097 9098 9099 9100 9101 9102 9103 9104 9105 9106 9107 9108 9109 9110 9111 9112 9113 9114 9115 9116 9117 9118 9119 9120 9121 9122 9123 9124 9125 9126 9127 9128 9129 9130 9131 9132 9133 9134 9135 9136 9137 9138 9139 9140 9141 9142 9143 9144 9145 9146 9147 9148 9149 9150 9151 9152 9153 9154 9155 9156 9157 9158 9159 9160 9161 9162 9163 9164 9165 9166 9167 9168 9169 9170 9171 9172 9173 9174 9175 9176 9177 9178 9179 9180 9181 9182 9183 9184 9185 9186 9187 9188 9189 9190 9191 9192 9193 9194 9195 9196 9197 9198 9199 9200 9201 9202 9203 9204 9205 9206 9207 9208 9209 9210 9211 9212 9213 9214 9215 9216 9217 9218 9219 9220 9221 9222 9223 9224 9225 9226 9227 9228 9229 9230 9231 9232 9233 9234 9235 9236 9237 9238 9239 9240 9241 9242 9243 9244 9245 9246 9247 9248 9249 9250 9251 9252 9253 9254 9255 9256 9257 9258 9259 9260 9261 9262 9263 9264 9265 9266 9267 9268 9269 9270 9271 9272 9273 9274 9275 9276 9277 9278 9279 9280 9281 9282 9283 9284 9285 9286 9287 9288 9289 9290 9291 9292 9293 9294 9295 9296 9297 9298 9299 9300 9301 9302 9303 9304 9305 9306 9307 9308 9309 9310 9311 9312 9313 9314 9315 9316 9317 9318 9319 9320 9321 9322 9323 9324 9325 9326 9327 9328 9329 9330 9331 9332 9333 9334 9335 9336 9337 9338 9339 9340 9341 9342 9343 9344 9345 9346 9347 9348 9349 9350 9351 9352 9353 9354 9355 9356 9357 9358 9359 9360 9361 9362 9363 9364 9365 9366 9367 9368 9369 9370 9371 9372 9373 9374 9375 9376 9377 9378 9379 9380 9381 9382 9383 9384 9385 9386 9387 9388 9389 9390 9391 9392 9393 9394 9395 9396 9397 9398 9399 9400 9401 9402 9403 9404 9405 9406 9407 9408 9409 9410 9411 9412 9413 9414 9415 9416 9417 9418 9419 9420 9421 9422 9423 9424 9425 9426 9427 9428 9429 9430 9431 9432 9433 9434 9435 9436 9437 9438 9439 9440 9441 9442 9443 9444 9445 9446 9447 9448 9449 9450 9451 9452 9453 9454 9455 9456 9457 9458 9459 9460 9461 9462 9463 9464 9465 9466 9467 9468 9469 9470 9471 9472 9473 9474 9475 9476 9477 9478 9479 9480 9481 9482 9483 9484 9485 9486 9487 9488 9489 9490 9491 9492 9493 9494 9495 9496 9497 9498 9499 9500 9501 9502 9503 9504 9505 9506 9507 9508 9509 9510 9511 9512 9513 9514 9515 9516 9517 9518 9519 9520 9521 9522 9523 9524 9525 9526 9527 9528 9529 9530 9531 9532 9533 9534 9535 9536 9537 9538 9539 9540 9541 9542 9543 9544 9545 9546 9547 9548 9549 9550 9551 9552 9553 9554 9555 9556 9557 9558 9559 9560 9561 9562 9563 9564 9565 9566 9567 9568 9569 9570 9571 9572 9573 9574 9575 9576 9577 9578 9579 9580 9581 9582 9583 9584 9585 9586 9587 9588 9589 9590 9591 9592 9593 9594 9595 9596 9597 9598 9599 9600 9601 9602 9603 9604 9605 9606 9607 9608 9609 9610 9611 9612 9613 9614 9615 9616 9617 9618 9619 9620 9621 9622 9623 9624 9625 9626 9627 9628 9629 9630 9631 9632 9633 9634 9635 9636 9637 9638 9639 9640 9641 9642 9643 9644 9645 9646 9647 9648 9649 9650 9651 9652 9653 9654 9655 9656 9657 9658 9659 9660 9661 9662 9663 9664 9665 9666 9667 9668 9669 9670 9671 9672 9673 9674 9675 9676 9677 9678 9679 9680 9681 9682 9683 9684 9685 9686 9687 9688 9689 9690 9691 9692 9693 9694 9695 9696 9697 9698 9699 9700 9701 9702 9703 9704 9705 9706 9707 9708 9709 9710 9711 9712 9713 9714 9715 9716 9717 9718 9719 9720 9721 9722 9723 9724 9725 9726 9727 9728 9729 9730 9731 9732 9733 9734 9735 9736 9737 9738 9739 9740 9741 9742 9743 9744 9745 9746 9747 9748 9749 9750 9751 9752 9753 9754 9755 9756 9757 9758 9759 9760 9761 9762 9763 9764 9765 9766 9767 9768 9769 9770 9771 9772 9773 9774 9775 9776 9777 9778 9779 9780 9781 9782 9783 9784 9785 9786 9787 9788 9789 9790 9791 9792 9793 9794 9795 9796 9797 9798 9799 9800 9801 9802 9803 9804 9805 9806 9807 9808 9809 9810 9811 9812 9813 9814 9815 9816 9817 9818 9819 9820 9821 9822 9823 9824 9825 9826 9827 9828 9829 9830 9831 9832 9833 9834 9835 9836 9837 9838 9839 9840 9841 9842 9843 9844 9845 9846 9847 9848 9849 9850 9851 9852 9853 9854 9855 9856 9857 9858 9859 9860 9861 9862 9863 9864 9865 9866 9867 9868 9869 9870 9871 9872 9873 9874 9875 9876 9877 9878 9879 9880 9881 9882 9883 9884 9885 9886 9887 9888 9889 9890 9891 9892 9893 9894 9895 9896 9897 9898 9899 9900 9901 9902 9903 9904 9905 9906 9907 9908 9909 9910 9911 9912 9913 9914 9915 9916 9917 9918 9919 9920 9921 9922 9923 9924 9925 9926 9927 9928 9929 9930 9931 9932 9933 9934 9935 9936 9937 9938 9939 9940 9941 9942 9943 9944 9945 9946 9947 9948 9949 9950 9951 9952 9953 9954 9955 9956 9957 9958 9959 9960 9961 9962 9963 9964 9965 9966 9967 9968 9969 9970 9971 9972 9973 9974 9975 9976 9977 9978 9979 9980 9981 9982 9983 9984 9985 9986 9987 9988 9989 9990 9991 9992 9993 9994 9995 9996 9997 9998 9999 10000 10001 10002 10003 10004 10005 10006 10007 10008 10009 10010 10011 10012 10013 10014 10015 10016 10017 10018 10019 10020 10021 10022 10023 10024 10025 10026 10027 10028 10029 10030 10031 10032 10033 10034 10035 10036 10037 10038 10039 10040 10041 10042 10043 10044 10045 10046 10047 10048 10049 10050 10051 10052 10053 10054 10055 10056 10057 10058 10059 10060 10061 10062 10063 10064 10065 10066 10067 10068 10069 10070 10071 10072 10073 10074 10075 10076 10077 10078 10079 10080 10081 10082 10083 10084 10085 10086 10087 10088 10089 10090 10091 10092 10093 10094 10095 10096 10097 10098 10099 10100 10101 10102 10103 10104 10105 10106 10107 10108 10109 10110 10111 10112 10113 10114 10115 10116 10117 10118 10119 10120 10121 10122 10123 10124 10125 10126 10127 10128 10129 10130 10131 10132 10133 10134 10135 10136 10137 10138 10139 10140 10141 10142 10143 10144 10145 10146 10147 10148 10149 10150 10151 10152 10153 10154 10155 10156 10157 10158 10159 10160 10161 10162 10163 10164 10165 10166 10167 10168 10169 10170 10171 10172 10173 10174 10175 10176 10177 10178 10179 10180 10181 10182 10183 10184 10185 10186 10187 10188 10189 10190 10191 10192 10193 10194 10195 10196 10197 10198 10199 10200 10201 10202 10203 10204 10205 10206 10207 10208 10209 10210 10211 10212 10213 10214 10215 10216 10217 10218 10219 10220 10221 10222 10223 10224 10225 10226 10227 10228 10229 10230 10231 10232 10233 10234 10235 10236 10237 10238 10239 10240 10241 10242 10243 10244 10245 10246 10247 10248 10249 10250 10251 10252 10253 10254 10255 10256 10257 10258 10259 10260 10261 10262 10263 10264 10265 10266 10267 10268 10269 10270 10271 10272 10273 10274 10275 10276 10277 10278 10279 10280 10281 10282 10283 10284 10285 10286 10287 10288 10289 10290 10291 10292 10293 10294 10295 10296 10297 10298 10299 10300 10301 10302 10303 10304 10305 10306 10307 10308 10309 10310 10311 10312 10313 10314 10315 10316 10317 10318 10319 10320 10321 10322 10323 10324 10325 10326 10327 10328 10329 10330 10331 10332 10333 10334 10335 10336 10337 10338 10339 10340 10341 10342 10343 10344 10345 10346 10347 10348 10349 10350 10351 10352 10353 10354 10355 10356 10357 10358 10359 10360 10361 10362 10363 10364 10365 10366 10367 10368 10369 10370 10371 10372 10373 10374 10375 10376 10377 10378 10379 10380 10381 10382 10383 10384 10385 10386 10387 10388 10389 10390 10391 10392 10393 10394 10395 10396 10397 10398 10399 10400 10401 10402 10403 10404 10405 10406 10407 10408 10409 10410 10411 10412 10413 10414 10415 10416 10417 10418 10419 10420 10421 10422 10423 10424 10425 10426 10427 10428 10429 10430 10431 10432 10433 10434 10435 10436 10437 10438 10439 10440 10441 10442 10443 10444 10445 10446 10447 10448 10449 10450 10451 10452 10453 10454 10455 10456 10457 10458 10459 10460 10461 10462 10463 10464 10465 10466 10467 10468 10469 10470 10471 10472 10473 10474 10475 10476 10477 10478 10479 10480 10481 10482 10483 10484 10485 10486 10487 10488 10489 10490 10491 10492 10493 10494 10495 10496 10497 10498 10499 10500 10501 10502 10503 10504 10505 10506 10507 10508 10509 10510 10511 10512 10513 10514 10515 10516 10517 10518 10519 10520 10521 10522 10523 10524 10525 10526 10527 10528 10529 10530 10531 10532 10533 10534 10535 10536 10537 10538 10539 10540 10541 10542 10543 10544 10545 10546 10547 10548 10549
diff --git a/src/gzip/README.freetype b/src/gzip/README.freetype
new file mode 100644
index 0000000..ce77920
--- /dev/null
+++ b/src/gzip/README.freetype
@@ -0,0 +1,22 @@
+Name: zlib
+Short Name: zlib
+URL: http://zlib.net/
+Version: 1.2.11
+License: see `zlib.h`
+
+Description:
+"A massively spiffy yet delicately unobtrusive compression library."
+
+'zlib' is a free, general-purpose, legally unencumbered lossless
+data-compression library. 'zlib' implements the "deflate"Â compression
+algorithm described by RFC 1951, which combines the LZ77 (Lempel-Ziv)
+algorithm with Huffman coding. zlib also implements the zlib (RFC 1950) and
+gzip (RFC 1952) wrapper formats.
+
+Local Modifications:
+The files in this directory have been prepared as follows.
+
+ - Take the unmodified source code files from the zlib distribution that are
+ included by `ftgzip.c`.
+ - Apply the diff file(s) in the `patches` folder.
+ - Run zlib's `zlib2ansi` script on all `.c` files.
diff --git a/src/gzip/adler32.c b/src/gzip/adler32.c
index c53f9dd..aa032e1 100644
--- a/src/gzip/adler32.c
+++ b/src/gzip/adler32.c
@@ -1,48 +1,192 @@
/* adler32.c -- compute the Adler-32 checksum of a data stream
- * Copyright (C) 1995-2002 Mark Adler
+ * Copyright (C) 1995-2011, 2016 Mark Adler
* For conditions of distribution and use, see copyright notice in zlib.h
*/
/* @(#) $Id$ */
-#include "zlib.h"
+#include "zutil.h"
-#define BASE 65521L /* largest prime smaller than 65536 */
+#ifndef Z_FREETYPE
+local uLong adler32_combine_ OF((uLong adler1, uLong adler2, z_off64_t len2));
+#endif
+
+#define BASE 65521U /* largest prime smaller than 65536 */
#define NMAX 5552
/* NMAX is the largest n such that 255n(n+1)/2 + (n+1)(BASE-1) <= 2^32-1 */
-#define DO1(buf,i) {s1 += buf[i]; s2 += s1;}
+#define DO1(buf,i) {adler += (buf)[i]; sum2 += adler;}
#define DO2(buf,i) DO1(buf,i); DO1(buf,i+1);
#define DO4(buf,i) DO2(buf,i); DO2(buf,i+2);
#define DO8(buf,i) DO4(buf,i); DO4(buf,i+4);
#define DO16(buf) DO8(buf,0); DO8(buf,8);
+/* use NO_DIVIDE if your processor does not do division in hardware --
+ try it both ways to see which is faster */
+#ifdef NO_DIVIDE
+/* note that this assumes BASE is 65521, where 65536 % 65521 == 15
+ (thank you to John Reiser for pointing this out) */
+# define CHOP(a) \
+ do { \
+ unsigned long tmp = a >> 16; \
+ a &= 0xffffUL; \
+ a += (tmp << 4) - tmp; \
+ } while (0)
+# define MOD28(a) \
+ do { \
+ CHOP(a); \
+ if (a >= BASE) a -= BASE; \
+ } while (0)
+# define MOD(a) \
+ do { \
+ CHOP(a); \
+ MOD28(a); \
+ } while (0)
+# define MOD63(a) \
+ do { /* this assumes a is not negative */ \
+ z_off64_t tmp = a >> 32; \
+ a &= 0xffffffffL; \
+ a += (tmp << 8) - (tmp << 5) + tmp; \
+ tmp = a >> 16; \
+ a &= 0xffffL; \
+ a += (tmp << 4) - tmp; \
+ tmp = a >> 16; \
+ a &= 0xffffL; \
+ a += (tmp << 4) - tmp; \
+ if (a >= BASE) a -= BASE; \
+ } while (0)
+#else
+# define MOD(a) a %= BASE
+# define MOD28(a) a %= BASE
+# define MOD63(a) a %= BASE
+#endif
+
/* ========================================================================= */
-ZEXPORT(uLong) adler32( /* adler, buf, len) */
+uLong ZEXPORT adler32_z(
uLong adler,
const Bytef *buf,
- uInt len )
+ z_size_t len)
{
- unsigned long s1 = adler & 0xffff;
- unsigned long s2 = (adler >> 16) & 0xffff;
- int k;
+ unsigned long sum2;
+ unsigned n;
+
+ /* split Adler-32 into component sums */
+ sum2 = (adler >> 16) & 0xffff;
+ adler &= 0xffff;
+
+ /* in case user likes doing a byte at a time, keep it fast */
+ if (len == 1) {
+ adler += buf[0];
+ if (adler >= BASE)
+ adler -= BASE;
+ sum2 += adler;
+ if (sum2 >= BASE)
+ sum2 -= BASE;
+ return adler | (sum2 << 16);
+ }
- if (buf == Z_NULL) return 1L;
+ /* initial Adler-32 value (deferred check for len == 1 speed) */
+ if (buf == Z_NULL)
+ return 1L;
- while (len > 0) {
- k = len < NMAX ? len : NMAX;
- len -= k;
- while (k >= 16) {
+ /* in case short lengths are provided, keep it somewhat fast */
+ if (len < 16) {
+ while (len--) {
+ adler += *buf++;
+ sum2 += adler;
+ }
+ if (adler >= BASE)
+ adler -= BASE;
+ MOD28(sum2); /* only added so many BASE's */
+ return adler | (sum2 << 16);
+ }
+
+ /* do length NMAX blocks -- requires just one modulo operation */
+ while (len >= NMAX) {
+ len -= NMAX;
+ n = NMAX / 16; /* NMAX is divisible by 16 */
+ do {
+ DO16(buf); /* 16 sums unrolled */
+ buf += 16;
+ } while (--n);
+ MOD(adler);
+ MOD(sum2);
+ }
+
+ /* do remaining bytes (less than NMAX, still just one modulo) */
+ if (len) { /* avoid modulos if none remaining */
+ while (len >= 16) {
+ len -= 16;
DO16(buf);
buf += 16;
- k -= 16;
}
- if (k != 0) do {
- s1 += *buf++;
- s2 += s1;
- } while (--k);
- s1 %= BASE;
- s2 %= BASE;
+ while (len--) {
+ adler += *buf++;
+ sum2 += adler;
+ }
+ MOD(adler);
+ MOD(sum2);
}
- return (s2 << 16) | s1;
+
+ /* return recombined sums */
+ return adler | (sum2 << 16);
+}
+
+/* ========================================================================= */
+uLong ZEXPORT adler32(
+ uLong adler,
+ const Bytef *buf,
+ uInt len)
+{
+ return adler32_z(adler, buf, len);
+}
+
+#ifndef Z_FREETYPE
+
+/* ========================================================================= */
+local uLong adler32_combine_(
+ uLong adler1,
+ uLong adler2,
+ z_off64_t len2)
+{
+ unsigned long sum1;
+ unsigned long sum2;
+ unsigned rem;
+
+ /* for negative len, return invalid adler32 as a clue for debugging */
+ if (len2 < 0)
+ return 0xffffffffUL;
+
+ /* the derivation of this formula is left as an exercise for the reader */
+ MOD63(len2); /* assumes len2 >= 0 */
+ rem = (unsigned)len2;
+ sum1 = adler1 & 0xffff;
+ sum2 = rem * sum1;
+ MOD(sum2);
+ sum1 += (adler2 & 0xffff) + BASE - 1;
+ sum2 += ((adler1 >> 16) & 0xffff) + ((adler2 >> 16) & 0xffff) + BASE - rem;
+ if (sum1 >= BASE) sum1 -= BASE;
+ if (sum1 >= BASE) sum1 -= BASE;
+ if (sum2 >= ((unsigned long)BASE << 1)) sum2 -= ((unsigned long)BASE << 1);
+ if (sum2 >= BASE) sum2 -= BASE;
+ return sum1 | (sum2 << 16);
}
+
+/* ========================================================================= */
+uLong ZEXPORT adler32_combine(
+ uLong adler1,
+ uLong adler2,
+ z_off_t len2)
+{
+ return adler32_combine_(adler1, adler2, len2);
+}
+
+uLong ZEXPORT adler32_combine64(
+ uLong adler1,
+ uLong adler2,
+ z_off64_t len2)
+{
+ return adler32_combine_(adler1, adler2, len2);
+}
+
+#endif /* !Z_FREETYPE */
diff --git a/src/gzip/crc32.c b/src/gzip/crc32.c
new file mode 100644
index 0000000..ffced1e
--- /dev/null
+++ b/src/gzip/crc32.c
@@ -0,0 +1,444 @@
+/* crc32.c -- compute the CRC-32 of a data stream
+ * Copyright (C) 1995-2006, 2010, 2011, 2012, 2016 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ *
+ * Thanks to Rodney Brown <rbrown64@csc.com.au> for his contribution of faster
+ * CRC methods: exclusive-oring 32 bits of data at a time, and pre-computing
+ * tables for updating the shift register in one step with three exclusive-ors
+ * instead of four steps with four exclusive-ors. This results in about a
+ * factor of two increase in speed on a Power PC G4 (PPC7455) using gcc -O3.
+ */
+
+/* @(#) $Id$ */
+
+/*
+ Note on the use of DYNAMIC_CRC_TABLE: there is no mutex or semaphore
+ protection on the static variables used to control the first-use generation
+ of the crc tables. Therefore, if you #define DYNAMIC_CRC_TABLE, you should
+ first call get_crc_table() to initialize the tables before allowing more than
+ one thread to use crc32().
+
+ DYNAMIC_CRC_TABLE and MAKECRCH can be #defined to write out crc32.h.
+ */
+
+#ifdef MAKECRCH
+# include <stdio.h>
+# ifndef DYNAMIC_CRC_TABLE
+# define DYNAMIC_CRC_TABLE
+# endif /* !DYNAMIC_CRC_TABLE */
+#endif /* MAKECRCH */
+
+#include "zutil.h" /* for STDC and FAR definitions */
+
+/* Definitions for doing the crc four data bytes at a time. */
+#if !defined(NOBYFOUR) && defined(Z_U4)
+# define BYFOUR
+#endif
+#ifdef BYFOUR
+ local unsigned long crc32_little OF((unsigned long,
+ const unsigned char FAR *, z_size_t));
+ local unsigned long crc32_big OF((unsigned long,
+ const unsigned char FAR *, z_size_t));
+# define TBLS 8
+#else
+# define TBLS 1
+#endif /* BYFOUR */
+
+/* Local functions for crc concatenation */
+local unsigned long gf2_matrix_times OF((unsigned long *mat,
+ unsigned long vec));
+local void gf2_matrix_square OF((unsigned long *square, unsigned long *mat));
+local uLong crc32_combine_ OF((uLong crc1, uLong crc2, z_off64_t len2));
+
+
+#ifdef DYNAMIC_CRC_TABLE
+
+local volatile int crc_table_empty = 1;
+local z_crc_t FAR crc_table[TBLS][256];
+local void make_crc_table OF((void));
+#ifdef MAKECRCH
+ local void write_table OF((FILE *, const z_crc_t FAR *));
+#endif /* MAKECRCH */
+/*
+ Generate tables for a byte-wise 32-bit CRC calculation on the polynomial:
+ x^32+x^26+x^23+x^22+x^16+x^12+x^11+x^10+x^8+x^7+x^5+x^4+x^2+x+1.
+
+ Polynomials over GF(2) are represented in binary, one bit per coefficient,
+ with the lowest powers in the most significant bit. Then adding polynomials
+ is just exclusive-or, and multiplying a polynomial by x is a right shift by
+ one. If we call the above polynomial p, and represent a byte as the
+ polynomial q, also with the lowest power in the most significant bit (so the
+ byte 0xb1 is the polynomial x^7+x^3+x+1), then the CRC is (q*x^32) mod p,
+ where a mod b means the remainder after dividing a by b.
+
+ This calculation is done using the shift-register method of multiplying and
+ taking the remainder. The register is initialized to zero, and for each
+ incoming bit, x^32 is added mod p to the register if the bit is a one (where
+ x^32 mod p is p+x^32 = x^26+...+1), and the register is multiplied mod p by
+ x (which is shifting right by one and adding x^32 mod p if the bit shifted
+ out is a one). We start with the highest power (least significant bit) of
+ q and repeat for all eight bits of q.
+
+ The first table is simply the CRC of all possible eight bit values. This is
+ all the information needed to generate CRCs on data a byte at a time for all
+ combinations of CRC register values and incoming bytes. The remaining tables
+ allow for word-at-a-time CRC calculation for both big-endian and little-
+ endian machines, where a word is four bytes.
+*/
+local void make_crc_table()
+{
+ z_crc_t c;
+ int n, k;
+ z_crc_t poly; /* polynomial exclusive-or pattern */
+ /* terms of polynomial defining this crc (except x^32): */
+ static volatile int first = 1; /* flag to limit concurrent making */
+ static const unsigned char p[] = {0,1,2,4,5,7,8,10,11,12,16,22,23,26};
+
+ /* See if another task is already doing this (not thread-safe, but better
+ than nothing -- significantly reduces duration of vulnerability in
+ case the advice about DYNAMIC_CRC_TABLE is ignored) */
+ if (first) {
+ first = 0;
+
+ /* make exclusive-or pattern from polynomial (0xedb88320UL) */
+ poly = 0;
+ for (n = 0; n < (int)(sizeof(p)/sizeof(unsigned char)); n++)
+ poly |= (z_crc_t)1 << (31 - p[n]);
+
+ /* generate a crc for every 8-bit value */
+ for (n = 0; n < 256; n++) {
+ c = (z_crc_t)n;
+ for (k = 0; k < 8; k++)
+ c = c & 1 ? poly ^ (c >> 1) : c >> 1;
+ crc_table[0][n] = c;
+ }
+
+#ifdef BYFOUR
+ /* generate crc for each value followed by one, two, and three zeros,
+ and then the byte reversal of those as well as the first table */
+ for (n = 0; n < 256; n++) {
+ c = crc_table[0][n];
+ crc_table[4][n] = ZSWAP32(c);
+ for (k = 1; k < 4; k++) {
+ c = crc_table[0][c & 0xff] ^ (c >> 8);
+ crc_table[k][n] = c;
+ crc_table[k + 4][n] = ZSWAP32(c);
+ }
+ }
+#endif /* BYFOUR */
+
+ crc_table_empty = 0;
+ }
+ else { /* not first */
+ /* wait for the other guy to finish (not efficient, but rare) */
+ while (crc_table_empty)
+ ;
+ }
+
+#ifdef MAKECRCH
+ /* write out CRC tables to crc32.h */
+ {
+ FILE *out;
+
+ out = fopen("crc32.h", "w");
+ if (out == NULL) return;
+ fprintf(out, "/* crc32.h -- tables for rapid CRC calculation\n");
+ fprintf(out, " * Generated automatically by crc32.c\n */\n\n");
+ fprintf(out, "local const z_crc_t FAR ");
+ fprintf(out, "crc_table[TBLS][256] =\n{\n {\n");
+ write_table(out, crc_table[0]);
+# ifdef BYFOUR
+ fprintf(out, "#ifdef BYFOUR\n");
+ for (k = 1; k < 8; k++) {
+ fprintf(out, " },\n {\n");
+ write_table(out, crc_table[k]);
+ }
+ fprintf(out, "#endif\n");
+# endif /* BYFOUR */
+ fprintf(out, " }\n};\n");
+ fclose(out);
+ }
+#endif /* MAKECRCH */
+}
+
+#ifdef MAKECRCH
+local void write_table(
+ FILE *out,
+ const z_crc_t FAR *table)
+{
+ int n;
+
+ for (n = 0; n < 256; n++)
+ fprintf(out, "%s0x%08lxUL%s", n % 5 ? "" : " ",
+ (unsigned long)(table[n]),
+ n == 255 ? "\n" : (n % 5 == 4 ? ",\n" : ", "));
+}
+#endif /* MAKECRCH */
+
+#else /* !DYNAMIC_CRC_TABLE */
+/* ========================================================================
+ * Tables of CRC-32s of all single-byte values, made by make_crc_table().
+ */
+#include "crc32.h"
+#endif /* DYNAMIC_CRC_TABLE */
+
+/* =========================================================================
+ * This function can be used by asm versions of crc32()
+ */
+const z_crc_t FAR * ZEXPORT get_crc_table()
+{
+#ifdef DYNAMIC_CRC_TABLE
+ if (crc_table_empty)
+ make_crc_table();
+#endif /* DYNAMIC_CRC_TABLE */
+ return (const z_crc_t FAR *)crc_table;
+}
+
+/* ========================================================================= */
+#undef DO1
+#undef DO8
+#define DO1 crc = crc_table[0][((int)crc ^ (*buf++)) & 0xff] ^ (crc >> 8)
+#define DO8 DO1; DO1; DO1; DO1; DO1; DO1; DO1; DO1
+
+/* ========================================================================= */
+unsigned long ZEXPORT crc32_z(
+ unsigned long crc,
+ const unsigned char FAR *buf,
+ z_size_t len)
+{
+ if (buf == Z_NULL) return 0UL;
+
+#ifdef DYNAMIC_CRC_TABLE
+ if (crc_table_empty)
+ make_crc_table();
+#endif /* DYNAMIC_CRC_TABLE */
+
+#ifdef BYFOUR
+ if (sizeof(void *) == sizeof(ptrdiff_t)) {
+ z_crc_t endian;
+
+ endian = 1;
+ if (*((unsigned char *)(&endian)))
+ return crc32_little(crc, buf, len);
+ else
+ return crc32_big(crc, buf, len);
+ }
+#endif /* BYFOUR */
+ crc = crc ^ 0xffffffffUL;
+ while (len >= 8) {
+ DO8;
+ len -= 8;
+ }
+ if (len) do {
+ DO1;
+ } while (--len);
+ return crc ^ 0xffffffffUL;
+}
+
+/* ========================================================================= */
+unsigned long ZEXPORT crc32(
+ unsigned long crc,
+ const unsigned char FAR *buf,
+ uInt len)
+{
+ return crc32_z(crc, buf, len);
+}
+
+#ifdef BYFOUR
+
+/*
+ This BYFOUR code accesses the passed unsigned char * buffer with a 32-bit
+ integer pointer type. This violates the strict aliasing rule, where a
+ compiler can assume, for optimization purposes, that two pointers to
+ fundamentally different types won't ever point to the same memory. This can
+ manifest as a problem only if one of the pointers is written to. This code
+ only reads from those pointers. So long as this code remains isolated in
+ this compilation unit, there won't be a problem. For this reason, this code
+ should not be copied and pasted into a compilation unit in which other code
+ writes to the buffer that is passed to these routines.
+ */
+
+/* ========================================================================= */
+#define DOLIT4 c ^= *buf4++; \
+ c = crc_table[3][c & 0xff] ^ crc_table[2][(c >> 8) & 0xff] ^ \
+ crc_table[1][(c >> 16) & 0xff] ^ crc_table[0][c >> 24]
+#define DOLIT32 DOLIT4; DOLIT4; DOLIT4; DOLIT4; DOLIT4; DOLIT4; DOLIT4; DOLIT4
+
+/* ========================================================================= */
+local unsigned long crc32_little(
+ unsigned long crc,
+ const unsigned char FAR *buf,
+ z_size_t len)
+{
+ register z_crc_t c;
+ register const z_crc_t FAR *buf4;
+
+ c = (z_crc_t)crc;
+ c = ~c;
+ while (len && ((ptrdiff_t)buf & 3)) {
+ c = crc_table[0][(c ^ *buf++) & 0xff] ^ (c >> 8);
+ len--;
+ }
+
+ buf4 = (const z_crc_t FAR *)(const void FAR *)buf;
+ while (len >= 32) {
+ DOLIT32;
+ len -= 32;
+ }
+ while (len >= 4) {
+ DOLIT4;
+ len -= 4;
+ }
+ buf = (const unsigned char FAR *)buf4;
+
+ if (len) do {
+ c = crc_table[0][(c ^ *buf++) & 0xff] ^ (c >> 8);
+ } while (--len);
+ c = ~c;
+ return (unsigned long)c;
+}
+
+/* ========================================================================= */
+#define DOBIG4 c ^= *buf4++; \
+ c = crc_table[4][c & 0xff] ^ crc_table[5][(c >> 8) & 0xff] ^ \
+ crc_table[6][(c >> 16) & 0xff] ^ crc_table[7][c >> 24]
+#define DOBIG32 DOBIG4; DOBIG4; DOBIG4; DOBIG4; DOBIG4; DOBIG4; DOBIG4; DOBIG4
+
+/* ========================================================================= */
+local unsigned long crc32_big(
+ unsigned long crc,
+ const unsigned char FAR *buf,
+ z_size_t len)
+{
+ register z_crc_t c;
+ register const z_crc_t FAR *buf4;
+
+ c = ZSWAP32((z_crc_t)crc);
+ c = ~c;
+ while (len && ((ptrdiff_t)buf & 3)) {
+ c = crc_table[4][(c >> 24) ^ *buf++] ^ (c << 8);
+ len--;
+ }
+
+ buf4 = (const z_crc_t FAR *)(const void FAR *)buf;
+ while (len >= 32) {
+ DOBIG32;
+ len -= 32;
+ }
+ while (len >= 4) {
+ DOBIG4;
+ len -= 4;
+ }
+ buf = (const unsigned char FAR *)buf4;
+
+ if (len) do {
+ c = crc_table[4][(c >> 24) ^ *buf++] ^ (c << 8);
+ } while (--len);
+ c = ~c;
+ return (unsigned long)(ZSWAP32(c));
+}
+
+#endif /* BYFOUR */
+
+#define GF2_DIM 32 /* dimension of GF(2) vectors (length of CRC) */
+
+/* ========================================================================= */
+local unsigned long gf2_matrix_times(
+ unsigned long *mat,
+ unsigned long vec)
+{
+ unsigned long sum;
+
+ sum = 0;
+ while (vec) {
+ if (vec & 1)
+ sum ^= *mat;
+ vec >>= 1;
+ mat++;
+ }
+ return sum;
+}
+
+/* ========================================================================= */
+local void gf2_matrix_square(
+ unsigned long *square,
+ unsigned long *mat)
+{
+ int n;
+
+ for (n = 0; n < GF2_DIM; n++)
+ square[n] = gf2_matrix_times(mat, mat[n]);
+}
+
+/* ========================================================================= */
+local uLong crc32_combine_(
+ uLong crc1,
+ uLong crc2,
+ z_off64_t len2)
+{
+ int n;
+ unsigned long row;
+ unsigned long even[GF2_DIM]; /* even-power-of-two zeros operator */
+ unsigned long odd[GF2_DIM]; /* odd-power-of-two zeros operator */
+
+ /* degenerate case (also disallow negative lengths) */
+ if (len2 <= 0)
+ return crc1;
+
+ /* put operator for one zero bit in odd */
+ odd[0] = 0xedb88320UL; /* CRC-32 polynomial */
+ row = 1;
+ for (n = 1; n < GF2_DIM; n++) {
+ odd[n] = row;
+ row <<= 1;
+ }
+
+ /* put operator for two zero bits in even */
+ gf2_matrix_square(even, odd);
+
+ /* put operator for four zero bits in odd */
+ gf2_matrix_square(odd, even);
+
+ /* apply len2 zeros to crc1 (first square will put the operator for one
+ zero byte, eight zero bits, in even) */
+ do {
+ /* apply zeros operator for this bit of len2 */
+ gf2_matrix_square(even, odd);
+ if (len2 & 1)
+ crc1 = gf2_matrix_times(even, crc1);
+ len2 >>= 1;
+
+ /* if no more bits set, then done */
+ if (len2 == 0)
+ break;
+
+ /* another iteration of the loop with odd and even swapped */
+ gf2_matrix_square(odd, even);
+ if (len2 & 1)
+ crc1 = gf2_matrix_times(odd, crc1);
+ len2 >>= 1;
+
+ /* if no more bits set, then done */
+ } while (len2 != 0);
+
+ /* return combined crc */
+ crc1 ^= crc2;
+ return crc1;
+}
+
+/* ========================================================================= */
+uLong ZEXPORT crc32_combine(
+ uLong crc1,
+ uLong crc2,
+ z_off_t len2)
+{
+ return crc32_combine_(crc1, crc2, len2);
+}
+
+uLong ZEXPORT crc32_combine64(
+ uLong crc1,
+ uLong crc2,
+ z_off64_t len2)
+{
+ return crc32_combine_(crc1, crc2, len2);
+}
diff --git a/src/gzip/crc32.h b/src/gzip/crc32.h
new file mode 100644
index 0000000..9e0c778
--- /dev/null
+++ b/src/gzip/crc32.h
@@ -0,0 +1,441 @@
+/* crc32.h -- tables for rapid CRC calculation
+ * Generated automatically by crc32.c
+ */
+
+local const z_crc_t FAR crc_table[TBLS][256] =
+{
+ {
+ 0x00000000UL, 0x77073096UL, 0xee0e612cUL, 0x990951baUL, 0x076dc419UL,
+ 0x706af48fUL, 0xe963a535UL, 0x9e6495a3UL, 0x0edb8832UL, 0x79dcb8a4UL,
+ 0xe0d5e91eUL, 0x97d2d988UL, 0x09b64c2bUL, 0x7eb17cbdUL, 0xe7b82d07UL,
+ 0x90bf1d91UL, 0x1db71064UL, 0x6ab020f2UL, 0xf3b97148UL, 0x84be41deUL,
+ 0x1adad47dUL, 0x6ddde4ebUL, 0xf4d4b551UL, 0x83d385c7UL, 0x136c9856UL,
+ 0x646ba8c0UL, 0xfd62f97aUL, 0x8a65c9ecUL, 0x14015c4fUL, 0x63066cd9UL,
+ 0xfa0f3d63UL, 0x8d080df5UL, 0x3b6e20c8UL, 0x4c69105eUL, 0xd56041e4UL,
+ 0xa2677172UL, 0x3c03e4d1UL, 0x4b04d447UL, 0xd20d85fdUL, 0xa50ab56bUL,
+ 0x35b5a8faUL, 0x42b2986cUL, 0xdbbbc9d6UL, 0xacbcf940UL, 0x32d86ce3UL,
+ 0x45df5c75UL, 0xdcd60dcfUL, 0xabd13d59UL, 0x26d930acUL, 0x51de003aUL,
+ 0xc8d75180UL, 0xbfd06116UL, 0x21b4f4b5UL, 0x56b3c423UL, 0xcfba9599UL,
+ 0xb8bda50fUL, 0x2802b89eUL, 0x5f058808UL, 0xc60cd9b2UL, 0xb10be924UL,
+ 0x2f6f7c87UL, 0x58684c11UL, 0xc1611dabUL, 0xb6662d3dUL, 0x76dc4190UL,
+ 0x01db7106UL, 0x98d220bcUL, 0xefd5102aUL, 0x71b18589UL, 0x06b6b51fUL,
+ 0x9fbfe4a5UL, 0xe8b8d433UL, 0x7807c9a2UL, 0x0f00f934UL, 0x9609a88eUL,
+ 0xe10e9818UL, 0x7f6a0dbbUL, 0x086d3d2dUL, 0x91646c97UL, 0xe6635c01UL,
+ 0x6b6b51f4UL, 0x1c6c6162UL, 0x856530d8UL, 0xf262004eUL, 0x6c0695edUL,
+ 0x1b01a57bUL, 0x8208f4c1UL, 0xf50fc457UL, 0x65b0d9c6UL, 0x12b7e950UL,
+ 0x8bbeb8eaUL, 0xfcb9887cUL, 0x62dd1ddfUL, 0x15da2d49UL, 0x8cd37cf3UL,
+ 0xfbd44c65UL, 0x4db26158UL, 0x3ab551ceUL, 0xa3bc0074UL, 0xd4bb30e2UL,
+ 0x4adfa541UL, 0x3dd895d7UL, 0xa4d1c46dUL, 0xd3d6f4fbUL, 0x4369e96aUL,
+ 0x346ed9fcUL, 0xad678846UL, 0xda60b8d0UL, 0x44042d73UL, 0x33031de5UL,
+ 0xaa0a4c5fUL, 0xdd0d7cc9UL, 0x5005713cUL, 0x270241aaUL, 0xbe0b1010UL,
+ 0xc90c2086UL, 0x5768b525UL, 0x206f85b3UL, 0xb966d409UL, 0xce61e49fUL,
+ 0x5edef90eUL, 0x29d9c998UL, 0xb0d09822UL, 0xc7d7a8b4UL, 0x59b33d17UL,
+ 0x2eb40d81UL, 0xb7bd5c3bUL, 0xc0ba6cadUL, 0xedb88320UL, 0x9abfb3b6UL,
+ 0x03b6e20cUL, 0x74b1d29aUL, 0xead54739UL, 0x9dd277afUL, 0x04db2615UL,
+ 0x73dc1683UL, 0xe3630b12UL, 0x94643b84UL, 0x0d6d6a3eUL, 0x7a6a5aa8UL,
+ 0xe40ecf0bUL, 0x9309ff9dUL, 0x0a00ae27UL, 0x7d079eb1UL, 0xf00f9344UL,
+ 0x8708a3d2UL, 0x1e01f268UL, 0x6906c2feUL, 0xf762575dUL, 0x806567cbUL,
+ 0x196c3671UL, 0x6e6b06e7UL, 0xfed41b76UL, 0x89d32be0UL, 0x10da7a5aUL,
+ 0x67dd4accUL, 0xf9b9df6fUL, 0x8ebeeff9UL, 0x17b7be43UL, 0x60b08ed5UL,
+ 0xd6d6a3e8UL, 0xa1d1937eUL, 0x38d8c2c4UL, 0x4fdff252UL, 0xd1bb67f1UL,
+ 0xa6bc5767UL, 0x3fb506ddUL, 0x48b2364bUL, 0xd80d2bdaUL, 0xaf0a1b4cUL,
+ 0x36034af6UL, 0x41047a60UL, 0xdf60efc3UL, 0xa867df55UL, 0x316e8eefUL,
+ 0x4669be79UL, 0xcb61b38cUL, 0xbc66831aUL, 0x256fd2a0UL, 0x5268e236UL,
+ 0xcc0c7795UL, 0xbb0b4703UL, 0x220216b9UL, 0x5505262fUL, 0xc5ba3bbeUL,
+ 0xb2bd0b28UL, 0x2bb45a92UL, 0x5cb36a04UL, 0xc2d7ffa7UL, 0xb5d0cf31UL,
+ 0x2cd99e8bUL, 0x5bdeae1dUL, 0x9b64c2b0UL, 0xec63f226UL, 0x756aa39cUL,
+ 0x026d930aUL, 0x9c0906a9UL, 0xeb0e363fUL, 0x72076785UL, 0x05005713UL,
+ 0x95bf4a82UL, 0xe2b87a14UL, 0x7bb12baeUL, 0x0cb61b38UL, 0x92d28e9bUL,
+ 0xe5d5be0dUL, 0x7cdcefb7UL, 0x0bdbdf21UL, 0x86d3d2d4UL, 0xf1d4e242UL,
+ 0x68ddb3f8UL, 0x1fda836eUL, 0x81be16cdUL, 0xf6b9265bUL, 0x6fb077e1UL,
+ 0x18b74777UL, 0x88085ae6UL, 0xff0f6a70UL, 0x66063bcaUL, 0x11010b5cUL,
+ 0x8f659effUL, 0xf862ae69UL, 0x616bffd3UL, 0x166ccf45UL, 0xa00ae278UL,
+ 0xd70dd2eeUL, 0x4e048354UL, 0x3903b3c2UL, 0xa7672661UL, 0xd06016f7UL,
+ 0x4969474dUL, 0x3e6e77dbUL, 0xaed16a4aUL, 0xd9d65adcUL, 0x40df0b66UL,
+ 0x37d83bf0UL, 0xa9bcae53UL, 0xdebb9ec5UL, 0x47b2cf7fUL, 0x30b5ffe9UL,
+ 0xbdbdf21cUL, 0xcabac28aUL, 0x53b39330UL, 0x24b4a3a6UL, 0xbad03605UL,
+ 0xcdd70693UL, 0x54de5729UL, 0x23d967bfUL, 0xb3667a2eUL, 0xc4614ab8UL,
+ 0x5d681b02UL, 0x2a6f2b94UL, 0xb40bbe37UL, 0xc30c8ea1UL, 0x5a05df1bUL,
+ 0x2d02ef8dUL
+#ifdef BYFOUR
+ },
+ {
+ 0x00000000UL, 0x191b3141UL, 0x32366282UL, 0x2b2d53c3UL, 0x646cc504UL,
+ 0x7d77f445UL, 0x565aa786UL, 0x4f4196c7UL, 0xc8d98a08UL, 0xd1c2bb49UL,
+ 0xfaefe88aUL, 0xe3f4d9cbUL, 0xacb54f0cUL, 0xb5ae7e4dUL, 0x9e832d8eUL,
+ 0x87981ccfUL, 0x4ac21251UL, 0x53d92310UL, 0x78f470d3UL, 0x61ef4192UL,
+ 0x2eaed755UL, 0x37b5e614UL, 0x1c98b5d7UL, 0x05838496UL, 0x821b9859UL,
+ 0x9b00a918UL, 0xb02dfadbUL, 0xa936cb9aUL, 0xe6775d5dUL, 0xff6c6c1cUL,
+ 0xd4413fdfUL, 0xcd5a0e9eUL, 0x958424a2UL, 0x8c9f15e3UL, 0xa7b24620UL,
+ 0xbea97761UL, 0xf1e8e1a6UL, 0xe8f3d0e7UL, 0xc3de8324UL, 0xdac5b265UL,
+ 0x5d5daeaaUL, 0x44469febUL, 0x6f6bcc28UL, 0x7670fd69UL, 0x39316baeUL,
+ 0x202a5aefUL, 0x0b07092cUL, 0x121c386dUL, 0xdf4636f3UL, 0xc65d07b2UL,
+ 0xed705471UL, 0xf46b6530UL, 0xbb2af3f7UL, 0xa231c2b6UL, 0x891c9175UL,
+ 0x9007a034UL, 0x179fbcfbUL, 0x0e848dbaUL, 0x25a9de79UL, 0x3cb2ef38UL,
+ 0x73f379ffUL, 0x6ae848beUL, 0x41c51b7dUL, 0x58de2a3cUL, 0xf0794f05UL,
+ 0xe9627e44UL, 0xc24f2d87UL, 0xdb541cc6UL, 0x94158a01UL, 0x8d0ebb40UL,
+ 0xa623e883UL, 0xbf38d9c2UL, 0x38a0c50dUL, 0x21bbf44cUL, 0x0a96a78fUL,
+ 0x138d96ceUL, 0x5ccc0009UL, 0x45d73148UL, 0x6efa628bUL, 0x77e153caUL,
+ 0xbabb5d54UL, 0xa3a06c15UL, 0x888d3fd6UL, 0x91960e97UL, 0xded79850UL,
+ 0xc7cca911UL, 0xece1fad2UL, 0xf5facb93UL, 0x7262d75cUL, 0x6b79e61dUL,
+ 0x4054b5deUL, 0x594f849fUL, 0x160e1258UL, 0x0f152319UL, 0x243870daUL,
+ 0x3d23419bUL, 0x65fd6ba7UL, 0x7ce65ae6UL, 0x57cb0925UL, 0x4ed03864UL,
+ 0x0191aea3UL, 0x188a9fe2UL, 0x33a7cc21UL, 0x2abcfd60UL, 0xad24e1afUL,
+ 0xb43fd0eeUL, 0x9f12832dUL, 0x8609b26cUL, 0xc94824abUL, 0xd05315eaUL,
+ 0xfb7e4629UL, 0xe2657768UL, 0x2f3f79f6UL, 0x362448b7UL, 0x1d091b74UL,
+ 0x04122a35UL, 0x4b53bcf2UL, 0x52488db3UL, 0x7965de70UL, 0x607eef31UL,
+ 0xe7e6f3feUL, 0xfefdc2bfUL, 0xd5d0917cUL, 0xcccba03dUL, 0x838a36faUL,
+ 0x9a9107bbUL, 0xb1bc5478UL, 0xa8a76539UL, 0x3b83984bUL, 0x2298a90aUL,
+ 0x09b5fac9UL, 0x10aecb88UL, 0x5fef5d4fUL, 0x46f46c0eUL, 0x6dd93fcdUL,
+ 0x74c20e8cUL, 0xf35a1243UL, 0xea412302UL, 0xc16c70c1UL, 0xd8774180UL,
+ 0x9736d747UL, 0x8e2de606UL, 0xa500b5c5UL, 0xbc1b8484UL, 0x71418a1aUL,
+ 0x685abb5bUL, 0x4377e898UL, 0x5a6cd9d9UL, 0x152d4f1eUL, 0x0c367e5fUL,
+ 0x271b2d9cUL, 0x3e001cddUL, 0xb9980012UL, 0xa0833153UL, 0x8bae6290UL,
+ 0x92b553d1UL, 0xddf4c516UL, 0xc4eff457UL, 0xefc2a794UL, 0xf6d996d5UL,
+ 0xae07bce9UL, 0xb71c8da8UL, 0x9c31de6bUL, 0x852aef2aUL, 0xca6b79edUL,
+ 0xd37048acUL, 0xf85d1b6fUL, 0xe1462a2eUL, 0x66de36e1UL, 0x7fc507a0UL,
+ 0x54e85463UL, 0x4df36522UL, 0x02b2f3e5UL, 0x1ba9c2a4UL, 0x30849167UL,
+ 0x299fa026UL, 0xe4c5aeb8UL, 0xfdde9ff9UL, 0xd6f3cc3aUL, 0xcfe8fd7bUL,
+ 0x80a96bbcUL, 0x99b25afdUL, 0xb29f093eUL, 0xab84387fUL, 0x2c1c24b0UL,
+ 0x350715f1UL, 0x1e2a4632UL, 0x07317773UL, 0x4870e1b4UL, 0x516bd0f5UL,
+ 0x7a468336UL, 0x635db277UL, 0xcbfad74eUL, 0xd2e1e60fUL, 0xf9ccb5ccUL,
+ 0xe0d7848dUL, 0xaf96124aUL, 0xb68d230bUL, 0x9da070c8UL, 0x84bb4189UL,
+ 0x03235d46UL, 0x1a386c07UL, 0x31153fc4UL, 0x280e0e85UL, 0x674f9842UL,
+ 0x7e54a903UL, 0x5579fac0UL, 0x4c62cb81UL, 0x8138c51fUL, 0x9823f45eUL,
+ 0xb30ea79dUL, 0xaa1596dcUL, 0xe554001bUL, 0xfc4f315aUL, 0xd7626299UL,
+ 0xce7953d8UL, 0x49e14f17UL, 0x50fa7e56UL, 0x7bd72d95UL, 0x62cc1cd4UL,
+ 0x2d8d8a13UL, 0x3496bb52UL, 0x1fbbe891UL, 0x06a0d9d0UL, 0x5e7ef3ecUL,
+ 0x4765c2adUL, 0x6c48916eUL, 0x7553a02fUL, 0x3a1236e8UL, 0x230907a9UL,
+ 0x0824546aUL, 0x113f652bUL, 0x96a779e4UL, 0x8fbc48a5UL, 0xa4911b66UL,
+ 0xbd8a2a27UL, 0xf2cbbce0UL, 0xebd08da1UL, 0xc0fdde62UL, 0xd9e6ef23UL,
+ 0x14bce1bdUL, 0x0da7d0fcUL, 0x268a833fUL, 0x3f91b27eUL, 0x70d024b9UL,
+ 0x69cb15f8UL, 0x42e6463bUL, 0x5bfd777aUL, 0xdc656bb5UL, 0xc57e5af4UL,
+ 0xee530937UL, 0xf7483876UL, 0xb809aeb1UL, 0xa1129ff0UL, 0x8a3fcc33UL,
+ 0x9324fd72UL
+ },
+ {
+ 0x00000000UL, 0x01c26a37UL, 0x0384d46eUL, 0x0246be59UL, 0x0709a8dcUL,
+ 0x06cbc2ebUL, 0x048d7cb2UL, 0x054f1685UL, 0x0e1351b8UL, 0x0fd13b8fUL,
+ 0x0d9785d6UL, 0x0c55efe1UL, 0x091af964UL, 0x08d89353UL, 0x0a9e2d0aUL,
+ 0x0b5c473dUL, 0x1c26a370UL, 0x1de4c947UL, 0x1fa2771eUL, 0x1e601d29UL,
+ 0x1b2f0bacUL, 0x1aed619bUL, 0x18abdfc2UL, 0x1969b5f5UL, 0x1235f2c8UL,
+ 0x13f798ffUL, 0x11b126a6UL, 0x10734c91UL, 0x153c5a14UL, 0x14fe3023UL,
+ 0x16b88e7aUL, 0x177ae44dUL, 0x384d46e0UL, 0x398f2cd7UL, 0x3bc9928eUL,
+ 0x3a0bf8b9UL, 0x3f44ee3cUL, 0x3e86840bUL, 0x3cc03a52UL, 0x3d025065UL,
+ 0x365e1758UL, 0x379c7d6fUL, 0x35dac336UL, 0x3418a901UL, 0x3157bf84UL,
+ 0x3095d5b3UL, 0x32d36beaUL, 0x331101ddUL, 0x246be590UL, 0x25a98fa7UL,
+ 0x27ef31feUL, 0x262d5bc9UL, 0x23624d4cUL, 0x22a0277bUL, 0x20e69922UL,
+ 0x2124f315UL, 0x2a78b428UL, 0x2bbade1fUL, 0x29fc6046UL, 0x283e0a71UL,
+ 0x2d711cf4UL, 0x2cb376c3UL, 0x2ef5c89aUL, 0x2f37a2adUL, 0x709a8dc0UL,
+ 0x7158e7f7UL, 0x731e59aeUL, 0x72dc3399UL, 0x7793251cUL, 0x76514f2bUL,
+ 0x7417f172UL, 0x75d59b45UL, 0x7e89dc78UL, 0x7f4bb64fUL, 0x7d0d0816UL,
+ 0x7ccf6221UL, 0x798074a4UL, 0x78421e93UL, 0x7a04a0caUL, 0x7bc6cafdUL,
+ 0x6cbc2eb0UL, 0x6d7e4487UL, 0x6f38fadeUL, 0x6efa90e9UL, 0x6bb5866cUL,
+ 0x6a77ec5bUL, 0x68315202UL, 0x69f33835UL, 0x62af7f08UL, 0x636d153fUL,
+ 0x612bab66UL, 0x60e9c151UL, 0x65a6d7d4UL, 0x6464bde3UL, 0x662203baUL,
+ 0x67e0698dUL, 0x48d7cb20UL, 0x4915a117UL, 0x4b531f4eUL, 0x4a917579UL,
+ 0x4fde63fcUL, 0x4e1c09cbUL, 0x4c5ab792UL, 0x4d98dda5UL, 0x46c49a98UL,
+ 0x4706f0afUL, 0x45404ef6UL, 0x448224c1UL, 0x41cd3244UL, 0x400f5873UL,
+ 0x4249e62aUL, 0x438b8c1dUL, 0x54f16850UL, 0x55330267UL, 0x5775bc3eUL,
+ 0x56b7d609UL, 0x53f8c08cUL, 0x523aaabbUL, 0x507c14e2UL, 0x51be7ed5UL,
+ 0x5ae239e8UL, 0x5b2053dfUL, 0x5966ed86UL, 0x58a487b1UL, 0x5deb9134UL,
+ 0x5c29fb03UL, 0x5e6f455aUL, 0x5fad2f6dUL, 0xe1351b80UL, 0xe0f771b7UL,
+ 0xe2b1cfeeUL, 0xe373a5d9UL, 0xe63cb35cUL, 0xe7fed96bUL, 0xe5b86732UL,
+ 0xe47a0d05UL, 0xef264a38UL, 0xeee4200fUL, 0xeca29e56UL, 0xed60f461UL,
+ 0xe82fe2e4UL, 0xe9ed88d3UL, 0xebab368aUL, 0xea695cbdUL, 0xfd13b8f0UL,
+ 0xfcd1d2c7UL, 0xfe976c9eUL, 0xff5506a9UL, 0xfa1a102cUL, 0xfbd87a1bUL,
+ 0xf99ec442UL, 0xf85cae75UL, 0xf300e948UL, 0xf2c2837fUL, 0xf0843d26UL,
+ 0xf1465711UL, 0xf4094194UL, 0xf5cb2ba3UL, 0xf78d95faUL, 0xf64fffcdUL,
+ 0xd9785d60UL, 0xd8ba3757UL, 0xdafc890eUL, 0xdb3ee339UL, 0xde71f5bcUL,
+ 0xdfb39f8bUL, 0xddf521d2UL, 0xdc374be5UL, 0xd76b0cd8UL, 0xd6a966efUL,
+ 0xd4efd8b6UL, 0xd52db281UL, 0xd062a404UL, 0xd1a0ce33UL, 0xd3e6706aUL,
+ 0xd2241a5dUL, 0xc55efe10UL, 0xc49c9427UL, 0xc6da2a7eUL, 0xc7184049UL,
+ 0xc25756ccUL, 0xc3953cfbUL, 0xc1d382a2UL, 0xc011e895UL, 0xcb4dafa8UL,
+ 0xca8fc59fUL, 0xc8c97bc6UL, 0xc90b11f1UL, 0xcc440774UL, 0xcd866d43UL,
+ 0xcfc0d31aUL, 0xce02b92dUL, 0x91af9640UL, 0x906dfc77UL, 0x922b422eUL,
+ 0x93e92819UL, 0x96a63e9cUL, 0x976454abUL, 0x9522eaf2UL, 0x94e080c5UL,
+ 0x9fbcc7f8UL, 0x9e7eadcfUL, 0x9c381396UL, 0x9dfa79a1UL, 0x98b56f24UL,
+ 0x99770513UL, 0x9b31bb4aUL, 0x9af3d17dUL, 0x8d893530UL, 0x8c4b5f07UL,
+ 0x8e0de15eUL, 0x8fcf8b69UL, 0x8a809decUL, 0x8b42f7dbUL, 0x89044982UL,
+ 0x88c623b5UL, 0x839a6488UL, 0x82580ebfUL, 0x801eb0e6UL, 0x81dcdad1UL,
+ 0x8493cc54UL, 0x8551a663UL, 0x8717183aUL, 0x86d5720dUL, 0xa9e2d0a0UL,
+ 0xa820ba97UL, 0xaa6604ceUL, 0xaba46ef9UL, 0xaeeb787cUL, 0xaf29124bUL,
+ 0xad6fac12UL, 0xacadc625UL, 0xa7f18118UL, 0xa633eb2fUL, 0xa4755576UL,
+ 0xa5b73f41UL, 0xa0f829c4UL, 0xa13a43f3UL, 0xa37cfdaaUL, 0xa2be979dUL,
+ 0xb5c473d0UL, 0xb40619e7UL, 0xb640a7beUL, 0xb782cd89UL, 0xb2cddb0cUL,
+ 0xb30fb13bUL, 0xb1490f62UL, 0xb08b6555UL, 0xbbd72268UL, 0xba15485fUL,
+ 0xb853f606UL, 0xb9919c31UL, 0xbcde8ab4UL, 0xbd1ce083UL, 0xbf5a5edaUL,
+ 0xbe9834edUL
+ },
+ {
+ 0x00000000UL, 0xb8bc6765UL, 0xaa09c88bUL, 0x12b5afeeUL, 0x8f629757UL,
+ 0x37def032UL, 0x256b5fdcUL, 0x9dd738b9UL, 0xc5b428efUL, 0x7d084f8aUL,
+ 0x6fbde064UL, 0xd7018701UL, 0x4ad6bfb8UL, 0xf26ad8ddUL, 0xe0df7733UL,
+ 0x58631056UL, 0x5019579fUL, 0xe8a530faUL, 0xfa109f14UL, 0x42acf871UL,
+ 0xdf7bc0c8UL, 0x67c7a7adUL, 0x75720843UL, 0xcdce6f26UL, 0x95ad7f70UL,
+ 0x2d111815UL, 0x3fa4b7fbUL, 0x8718d09eUL, 0x1acfe827UL, 0xa2738f42UL,
+ 0xb0c620acUL, 0x087a47c9UL, 0xa032af3eUL, 0x188ec85bUL, 0x0a3b67b5UL,
+ 0xb28700d0UL, 0x2f503869UL, 0x97ec5f0cUL, 0x8559f0e2UL, 0x3de59787UL,
+ 0x658687d1UL, 0xdd3ae0b4UL, 0xcf8f4f5aUL, 0x7733283fUL, 0xeae41086UL,
+ 0x525877e3UL, 0x40edd80dUL, 0xf851bf68UL, 0xf02bf8a1UL, 0x48979fc4UL,
+ 0x5a22302aUL, 0xe29e574fUL, 0x7f496ff6UL, 0xc7f50893UL, 0xd540a77dUL,
+ 0x6dfcc018UL, 0x359fd04eUL, 0x8d23b72bUL, 0x9f9618c5UL, 0x272a7fa0UL,
+ 0xbafd4719UL, 0x0241207cUL, 0x10f48f92UL, 0xa848e8f7UL, 0x9b14583dUL,
+ 0x23a83f58UL, 0x311d90b6UL, 0x89a1f7d3UL, 0x1476cf6aUL, 0xaccaa80fUL,
+ 0xbe7f07e1UL, 0x06c36084UL, 0x5ea070d2UL, 0xe61c17b7UL, 0xf4a9b859UL,
+ 0x4c15df3cUL, 0xd1c2e785UL, 0x697e80e0UL, 0x7bcb2f0eUL, 0xc377486bUL,
+ 0xcb0d0fa2UL, 0x73b168c7UL, 0x6104c729UL, 0xd9b8a04cUL, 0x446f98f5UL,
+ 0xfcd3ff90UL, 0xee66507eUL, 0x56da371bUL, 0x0eb9274dUL, 0xb6054028UL,
+ 0xa4b0efc6UL, 0x1c0c88a3UL, 0x81dbb01aUL, 0x3967d77fUL, 0x2bd27891UL,
+ 0x936e1ff4UL, 0x3b26f703UL, 0x839a9066UL, 0x912f3f88UL, 0x299358edUL,
+ 0xb4446054UL, 0x0cf80731UL, 0x1e4da8dfUL, 0xa6f1cfbaUL, 0xfe92dfecUL,
+ 0x462eb889UL, 0x549b1767UL, 0xec277002UL, 0x71f048bbUL, 0xc94c2fdeUL,
+ 0xdbf98030UL, 0x6345e755UL, 0x6b3fa09cUL, 0xd383c7f9UL, 0xc1366817UL,
+ 0x798a0f72UL, 0xe45d37cbUL, 0x5ce150aeUL, 0x4e54ff40UL, 0xf6e89825UL,
+ 0xae8b8873UL, 0x1637ef16UL, 0x048240f8UL, 0xbc3e279dUL, 0x21e91f24UL,
+ 0x99557841UL, 0x8be0d7afUL, 0x335cb0caUL, 0xed59b63bUL, 0x55e5d15eUL,
+ 0x47507eb0UL, 0xffec19d5UL, 0x623b216cUL, 0xda874609UL, 0xc832e9e7UL,
+ 0x708e8e82UL, 0x28ed9ed4UL, 0x9051f9b1UL, 0x82e4565fUL, 0x3a58313aUL,
+ 0xa78f0983UL, 0x1f336ee6UL, 0x0d86c108UL, 0xb53aa66dUL, 0xbd40e1a4UL,
+ 0x05fc86c1UL, 0x1749292fUL, 0xaff54e4aUL, 0x322276f3UL, 0x8a9e1196UL,
+ 0x982bbe78UL, 0x2097d91dUL, 0x78f4c94bUL, 0xc048ae2eUL, 0xd2fd01c0UL,
+ 0x6a4166a5UL, 0xf7965e1cUL, 0x4f2a3979UL, 0x5d9f9697UL, 0xe523f1f2UL,
+ 0x4d6b1905UL, 0xf5d77e60UL, 0xe762d18eUL, 0x5fdeb6ebUL, 0xc2098e52UL,
+ 0x7ab5e937UL, 0x680046d9UL, 0xd0bc21bcUL, 0x88df31eaUL, 0x3063568fUL,
+ 0x22d6f961UL, 0x9a6a9e04UL, 0x07bda6bdUL, 0xbf01c1d8UL, 0xadb46e36UL,
+ 0x15080953UL, 0x1d724e9aUL, 0xa5ce29ffUL, 0xb77b8611UL, 0x0fc7e174UL,
+ 0x9210d9cdUL, 0x2aacbea8UL, 0x38191146UL, 0x80a57623UL, 0xd8c66675UL,
+ 0x607a0110UL, 0x72cfaefeUL, 0xca73c99bUL, 0x57a4f122UL, 0xef189647UL,
+ 0xfdad39a9UL, 0x45115eccUL, 0x764dee06UL, 0xcef18963UL, 0xdc44268dUL,
+ 0x64f841e8UL, 0xf92f7951UL, 0x41931e34UL, 0x5326b1daUL, 0xeb9ad6bfUL,
+ 0xb3f9c6e9UL, 0x0b45a18cUL, 0x19f00e62UL, 0xa14c6907UL, 0x3c9b51beUL,
+ 0x842736dbUL, 0x96929935UL, 0x2e2efe50UL, 0x2654b999UL, 0x9ee8defcUL,
+ 0x8c5d7112UL, 0x34e11677UL, 0xa9362eceUL, 0x118a49abUL, 0x033fe645UL,
+ 0xbb838120UL, 0xe3e09176UL, 0x5b5cf613UL, 0x49e959fdUL, 0xf1553e98UL,
+ 0x6c820621UL, 0xd43e6144UL, 0xc68bceaaUL, 0x7e37a9cfUL, 0xd67f4138UL,
+ 0x6ec3265dUL, 0x7c7689b3UL, 0xc4caeed6UL, 0x591dd66fUL, 0xe1a1b10aUL,
+ 0xf3141ee4UL, 0x4ba87981UL, 0x13cb69d7UL, 0xab770eb2UL, 0xb9c2a15cUL,
+ 0x017ec639UL, 0x9ca9fe80UL, 0x241599e5UL, 0x36a0360bUL, 0x8e1c516eUL,
+ 0x866616a7UL, 0x3eda71c2UL, 0x2c6fde2cUL, 0x94d3b949UL, 0x090481f0UL,
+ 0xb1b8e695UL, 0xa30d497bUL, 0x1bb12e1eUL, 0x43d23e48UL, 0xfb6e592dUL,
+ 0xe9dbf6c3UL, 0x516791a6UL, 0xccb0a91fUL, 0x740cce7aUL, 0x66b96194UL,
+ 0xde0506f1UL
+ },
+ {
+ 0x00000000UL, 0x96300777UL, 0x2c610eeeUL, 0xba510999UL, 0x19c46d07UL,
+ 0x8ff46a70UL, 0x35a563e9UL, 0xa395649eUL, 0x3288db0eUL, 0xa4b8dc79UL,
+ 0x1ee9d5e0UL, 0x88d9d297UL, 0x2b4cb609UL, 0xbd7cb17eUL, 0x072db8e7UL,
+ 0x911dbf90UL, 0x6410b71dUL, 0xf220b06aUL, 0x4871b9f3UL, 0xde41be84UL,
+ 0x7dd4da1aUL, 0xebe4dd6dUL, 0x51b5d4f4UL, 0xc785d383UL, 0x56986c13UL,
+ 0xc0a86b64UL, 0x7af962fdUL, 0xecc9658aUL, 0x4f5c0114UL, 0xd96c0663UL,
+ 0x633d0ffaUL, 0xf50d088dUL, 0xc8206e3bUL, 0x5e10694cUL, 0xe44160d5UL,
+ 0x727167a2UL, 0xd1e4033cUL, 0x47d4044bUL, 0xfd850dd2UL, 0x6bb50aa5UL,
+ 0xfaa8b535UL, 0x6c98b242UL, 0xd6c9bbdbUL, 0x40f9bcacUL, 0xe36cd832UL,
+ 0x755cdf45UL, 0xcf0dd6dcUL, 0x593dd1abUL, 0xac30d926UL, 0x3a00de51UL,
+ 0x8051d7c8UL, 0x1661d0bfUL, 0xb5f4b421UL, 0x23c4b356UL, 0x9995bacfUL,
+ 0x0fa5bdb8UL, 0x9eb80228UL, 0x0888055fUL, 0xb2d90cc6UL, 0x24e90bb1UL,
+ 0x877c6f2fUL, 0x114c6858UL, 0xab1d61c1UL, 0x3d2d66b6UL, 0x9041dc76UL,
+ 0x0671db01UL, 0xbc20d298UL, 0x2a10d5efUL, 0x8985b171UL, 0x1fb5b606UL,
+ 0xa5e4bf9fUL, 0x33d4b8e8UL, 0xa2c90778UL, 0x34f9000fUL, 0x8ea80996UL,
+ 0x18980ee1UL, 0xbb0d6a7fUL, 0x2d3d6d08UL, 0x976c6491UL, 0x015c63e6UL,
+ 0xf4516b6bUL, 0x62616c1cUL, 0xd8306585UL, 0x4e0062f2UL, 0xed95066cUL,
+ 0x7ba5011bUL, 0xc1f40882UL, 0x57c40ff5UL, 0xc6d9b065UL, 0x50e9b712UL,
+ 0xeab8be8bUL, 0x7c88b9fcUL, 0xdf1ddd62UL, 0x492dda15UL, 0xf37cd38cUL,
+ 0x654cd4fbUL, 0x5861b24dUL, 0xce51b53aUL, 0x7400bca3UL, 0xe230bbd4UL,
+ 0x41a5df4aUL, 0xd795d83dUL, 0x6dc4d1a4UL, 0xfbf4d6d3UL, 0x6ae96943UL,
+ 0xfcd96e34UL, 0x468867adUL, 0xd0b860daUL, 0x732d0444UL, 0xe51d0333UL,
+ 0x5f4c0aaaUL, 0xc97c0dddUL, 0x3c710550UL, 0xaa410227UL, 0x10100bbeUL,
+ 0x86200cc9UL, 0x25b56857UL, 0xb3856f20UL, 0x09d466b9UL, 0x9fe461ceUL,
+ 0x0ef9de5eUL, 0x98c9d929UL, 0x2298d0b0UL, 0xb4a8d7c7UL, 0x173db359UL,
+ 0x810db42eUL, 0x3b5cbdb7UL, 0xad6cbac0UL, 0x2083b8edUL, 0xb6b3bf9aUL,
+ 0x0ce2b603UL, 0x9ad2b174UL, 0x3947d5eaUL, 0xaf77d29dUL, 0x1526db04UL,
+ 0x8316dc73UL, 0x120b63e3UL, 0x843b6494UL, 0x3e6a6d0dUL, 0xa85a6a7aUL,
+ 0x0bcf0ee4UL, 0x9dff0993UL, 0x27ae000aUL, 0xb19e077dUL, 0x44930ff0UL,
+ 0xd2a30887UL, 0x68f2011eUL, 0xfec20669UL, 0x5d5762f7UL, 0xcb676580UL,
+ 0x71366c19UL, 0xe7066b6eUL, 0x761bd4feUL, 0xe02bd389UL, 0x5a7ada10UL,
+ 0xcc4add67UL, 0x6fdfb9f9UL, 0xf9efbe8eUL, 0x43beb717UL, 0xd58eb060UL,
+ 0xe8a3d6d6UL, 0x7e93d1a1UL, 0xc4c2d838UL, 0x52f2df4fUL, 0xf167bbd1UL,
+ 0x6757bca6UL, 0xdd06b53fUL, 0x4b36b248UL, 0xda2b0dd8UL, 0x4c1b0aafUL,
+ 0xf64a0336UL, 0x607a0441UL, 0xc3ef60dfUL, 0x55df67a8UL, 0xef8e6e31UL,
+ 0x79be6946UL, 0x8cb361cbUL, 0x1a8366bcUL, 0xa0d26f25UL, 0x36e26852UL,
+ 0x95770cccUL, 0x03470bbbUL, 0xb9160222UL, 0x2f260555UL, 0xbe3bbac5UL,
+ 0x280bbdb2UL, 0x925ab42bUL, 0x046ab35cUL, 0xa7ffd7c2UL, 0x31cfd0b5UL,
+ 0x8b9ed92cUL, 0x1daede5bUL, 0xb0c2649bUL, 0x26f263ecUL, 0x9ca36a75UL,
+ 0x0a936d02UL, 0xa906099cUL, 0x3f360eebUL, 0x85670772UL, 0x13570005UL,
+ 0x824abf95UL, 0x147ab8e2UL, 0xae2bb17bUL, 0x381bb60cUL, 0x9b8ed292UL,
+ 0x0dbed5e5UL, 0xb7efdc7cUL, 0x21dfdb0bUL, 0xd4d2d386UL, 0x42e2d4f1UL,
+ 0xf8b3dd68UL, 0x6e83da1fUL, 0xcd16be81UL, 0x5b26b9f6UL, 0xe177b06fUL,
+ 0x7747b718UL, 0xe65a0888UL, 0x706a0fffUL, 0xca3b0666UL, 0x5c0b0111UL,
+ 0xff9e658fUL, 0x69ae62f8UL, 0xd3ff6b61UL, 0x45cf6c16UL, 0x78e20aa0UL,
+ 0xeed20dd7UL, 0x5483044eUL, 0xc2b30339UL, 0x612667a7UL, 0xf71660d0UL,
+ 0x4d476949UL, 0xdb776e3eUL, 0x4a6ad1aeUL, 0xdc5ad6d9UL, 0x660bdf40UL,
+ 0xf03bd837UL, 0x53aebca9UL, 0xc59ebbdeUL, 0x7fcfb247UL, 0xe9ffb530UL,
+ 0x1cf2bdbdUL, 0x8ac2bacaUL, 0x3093b353UL, 0xa6a3b424UL, 0x0536d0baUL,
+ 0x9306d7cdUL, 0x2957de54UL, 0xbf67d923UL, 0x2e7a66b3UL, 0xb84a61c4UL,
+ 0x021b685dUL, 0x942b6f2aUL, 0x37be0bb4UL, 0xa18e0cc3UL, 0x1bdf055aUL,
+ 0x8def022dUL
+ },
+ {
+ 0x00000000UL, 0x41311b19UL, 0x82623632UL, 0xc3532d2bUL, 0x04c56c64UL,
+ 0x45f4777dUL, 0x86a75a56UL, 0xc796414fUL, 0x088ad9c8UL, 0x49bbc2d1UL,
+ 0x8ae8effaUL, 0xcbd9f4e3UL, 0x0c4fb5acUL, 0x4d7eaeb5UL, 0x8e2d839eUL,
+ 0xcf1c9887UL, 0x5112c24aUL, 0x1023d953UL, 0xd370f478UL, 0x9241ef61UL,
+ 0x55d7ae2eUL, 0x14e6b537UL, 0xd7b5981cUL, 0x96848305UL, 0x59981b82UL,
+ 0x18a9009bUL, 0xdbfa2db0UL, 0x9acb36a9UL, 0x5d5d77e6UL, 0x1c6c6cffUL,
+ 0xdf3f41d4UL, 0x9e0e5acdUL, 0xa2248495UL, 0xe3159f8cUL, 0x2046b2a7UL,
+ 0x6177a9beUL, 0xa6e1e8f1UL, 0xe7d0f3e8UL, 0x2483dec3UL, 0x65b2c5daUL,
+ 0xaaae5d5dUL, 0xeb9f4644UL, 0x28cc6b6fUL, 0x69fd7076UL, 0xae6b3139UL,
+ 0xef5a2a20UL, 0x2c09070bUL, 0x6d381c12UL, 0xf33646dfUL, 0xb2075dc6UL,
+ 0x715470edUL, 0x30656bf4UL, 0xf7f32abbUL, 0xb6c231a2UL, 0x75911c89UL,
+ 0x34a00790UL, 0xfbbc9f17UL, 0xba8d840eUL, 0x79dea925UL, 0x38efb23cUL,
+ 0xff79f373UL, 0xbe48e86aUL, 0x7d1bc541UL, 0x3c2ade58UL, 0x054f79f0UL,
+ 0x447e62e9UL, 0x872d4fc2UL, 0xc61c54dbUL, 0x018a1594UL, 0x40bb0e8dUL,
+ 0x83e823a6UL, 0xc2d938bfUL, 0x0dc5a038UL, 0x4cf4bb21UL, 0x8fa7960aUL,
+ 0xce968d13UL, 0x0900cc5cUL, 0x4831d745UL, 0x8b62fa6eUL, 0xca53e177UL,
+ 0x545dbbbaUL, 0x156ca0a3UL, 0xd63f8d88UL, 0x970e9691UL, 0x5098d7deUL,
+ 0x11a9ccc7UL, 0xd2fae1ecUL, 0x93cbfaf5UL, 0x5cd76272UL, 0x1de6796bUL,
+ 0xdeb55440UL, 0x9f844f59UL, 0x58120e16UL, 0x1923150fUL, 0xda703824UL,
+ 0x9b41233dUL, 0xa76bfd65UL, 0xe65ae67cUL, 0x2509cb57UL, 0x6438d04eUL,
+ 0xa3ae9101UL, 0xe29f8a18UL, 0x21cca733UL, 0x60fdbc2aUL, 0xafe124adUL,
+ 0xeed03fb4UL, 0x2d83129fUL, 0x6cb20986UL, 0xab2448c9UL, 0xea1553d0UL,
+ 0x29467efbUL, 0x687765e2UL, 0xf6793f2fUL, 0xb7482436UL, 0x741b091dUL,
+ 0x352a1204UL, 0xf2bc534bUL, 0xb38d4852UL, 0x70de6579UL, 0x31ef7e60UL,
+ 0xfef3e6e7UL, 0xbfc2fdfeUL, 0x7c91d0d5UL, 0x3da0cbccUL, 0xfa368a83UL,
+ 0xbb07919aUL, 0x7854bcb1UL, 0x3965a7a8UL, 0x4b98833bUL, 0x0aa99822UL,
+ 0xc9fab509UL, 0x88cbae10UL, 0x4f5def5fUL, 0x0e6cf446UL, 0xcd3fd96dUL,
+ 0x8c0ec274UL, 0x43125af3UL, 0x022341eaUL, 0xc1706cc1UL, 0x804177d8UL,
+ 0x47d73697UL, 0x06e62d8eUL, 0xc5b500a5UL, 0x84841bbcUL, 0x1a8a4171UL,
+ 0x5bbb5a68UL, 0x98e87743UL, 0xd9d96c5aUL, 0x1e4f2d15UL, 0x5f7e360cUL,
+ 0x9c2d1b27UL, 0xdd1c003eUL, 0x120098b9UL, 0x533183a0UL, 0x9062ae8bUL,
+ 0xd153b592UL, 0x16c5f4ddUL, 0x57f4efc4UL, 0x94a7c2efUL, 0xd596d9f6UL,
+ 0xe9bc07aeUL, 0xa88d1cb7UL, 0x6bde319cUL, 0x2aef2a85UL, 0xed796bcaUL,
+ 0xac4870d3UL, 0x6f1b5df8UL, 0x2e2a46e1UL, 0xe136de66UL, 0xa007c57fUL,
+ 0x6354e854UL, 0x2265f34dUL, 0xe5f3b202UL, 0xa4c2a91bUL, 0x67918430UL,
+ 0x26a09f29UL, 0xb8aec5e4UL, 0xf99fdefdUL, 0x3accf3d6UL, 0x7bfde8cfUL,
+ 0xbc6ba980UL, 0xfd5ab299UL, 0x3e099fb2UL, 0x7f3884abUL, 0xb0241c2cUL,
+ 0xf1150735UL, 0x32462a1eUL, 0x73773107UL, 0xb4e17048UL, 0xf5d06b51UL,
+ 0x3683467aUL, 0x77b25d63UL, 0x4ed7facbUL, 0x0fe6e1d2UL, 0xccb5ccf9UL,
+ 0x8d84d7e0UL, 0x4a1296afUL, 0x0b238db6UL, 0xc870a09dUL, 0x8941bb84UL,
+ 0x465d2303UL, 0x076c381aUL, 0xc43f1531UL, 0x850e0e28UL, 0x42984f67UL,
+ 0x03a9547eUL, 0xc0fa7955UL, 0x81cb624cUL, 0x1fc53881UL, 0x5ef42398UL,
+ 0x9da70eb3UL, 0xdc9615aaUL, 0x1b0054e5UL, 0x5a314ffcUL, 0x996262d7UL,
+ 0xd85379ceUL, 0x174fe149UL, 0x567efa50UL, 0x952dd77bUL, 0xd41ccc62UL,
+ 0x138a8d2dUL, 0x52bb9634UL, 0x91e8bb1fUL, 0xd0d9a006UL, 0xecf37e5eUL,
+ 0xadc26547UL, 0x6e91486cUL, 0x2fa05375UL, 0xe836123aUL, 0xa9070923UL,
+ 0x6a542408UL, 0x2b653f11UL, 0xe479a796UL, 0xa548bc8fUL, 0x661b91a4UL,
+ 0x272a8abdUL, 0xe0bccbf2UL, 0xa18dd0ebUL, 0x62defdc0UL, 0x23efe6d9UL,
+ 0xbde1bc14UL, 0xfcd0a70dUL, 0x3f838a26UL, 0x7eb2913fUL, 0xb924d070UL,
+ 0xf815cb69UL, 0x3b46e642UL, 0x7a77fd5bUL, 0xb56b65dcUL, 0xf45a7ec5UL,
+ 0x370953eeUL, 0x763848f7UL, 0xb1ae09b8UL, 0xf09f12a1UL, 0x33cc3f8aUL,
+ 0x72fd2493UL
+ },
+ {
+ 0x00000000UL, 0x376ac201UL, 0x6ed48403UL, 0x59be4602UL, 0xdca80907UL,
+ 0xebc2cb06UL, 0xb27c8d04UL, 0x85164f05UL, 0xb851130eUL, 0x8f3bd10fUL,
+ 0xd685970dUL, 0xe1ef550cUL, 0x64f91a09UL, 0x5393d808UL, 0x0a2d9e0aUL,
+ 0x3d475c0bUL, 0x70a3261cUL, 0x47c9e41dUL, 0x1e77a21fUL, 0x291d601eUL,
+ 0xac0b2f1bUL, 0x9b61ed1aUL, 0xc2dfab18UL, 0xf5b56919UL, 0xc8f23512UL,
+ 0xff98f713UL, 0xa626b111UL, 0x914c7310UL, 0x145a3c15UL, 0x2330fe14UL,
+ 0x7a8eb816UL, 0x4de47a17UL, 0xe0464d38UL, 0xd72c8f39UL, 0x8e92c93bUL,
+ 0xb9f80b3aUL, 0x3cee443fUL, 0x0b84863eUL, 0x523ac03cUL, 0x6550023dUL,
+ 0x58175e36UL, 0x6f7d9c37UL, 0x36c3da35UL, 0x01a91834UL, 0x84bf5731UL,
+ 0xb3d59530UL, 0xea6bd332UL, 0xdd011133UL, 0x90e56b24UL, 0xa78fa925UL,
+ 0xfe31ef27UL, 0xc95b2d26UL, 0x4c4d6223UL, 0x7b27a022UL, 0x2299e620UL,
+ 0x15f32421UL, 0x28b4782aUL, 0x1fdeba2bUL, 0x4660fc29UL, 0x710a3e28UL,
+ 0xf41c712dUL, 0xc376b32cUL, 0x9ac8f52eUL, 0xada2372fUL, 0xc08d9a70UL,
+ 0xf7e75871UL, 0xae591e73UL, 0x9933dc72UL, 0x1c259377UL, 0x2b4f5176UL,
+ 0x72f11774UL, 0x459bd575UL, 0x78dc897eUL, 0x4fb64b7fUL, 0x16080d7dUL,
+ 0x2162cf7cUL, 0xa4748079UL, 0x931e4278UL, 0xcaa0047aUL, 0xfdcac67bUL,
+ 0xb02ebc6cUL, 0x87447e6dUL, 0xdefa386fUL, 0xe990fa6eUL, 0x6c86b56bUL,
+ 0x5bec776aUL, 0x02523168UL, 0x3538f369UL, 0x087faf62UL, 0x3f156d63UL,
+ 0x66ab2b61UL, 0x51c1e960UL, 0xd4d7a665UL, 0xe3bd6464UL, 0xba032266UL,
+ 0x8d69e067UL, 0x20cbd748UL, 0x17a11549UL, 0x4e1f534bUL, 0x7975914aUL,
+ 0xfc63de4fUL, 0xcb091c4eUL, 0x92b75a4cUL, 0xa5dd984dUL, 0x989ac446UL,
+ 0xaff00647UL, 0xf64e4045UL, 0xc1248244UL, 0x4432cd41UL, 0x73580f40UL,
+ 0x2ae64942UL, 0x1d8c8b43UL, 0x5068f154UL, 0x67023355UL, 0x3ebc7557UL,
+ 0x09d6b756UL, 0x8cc0f853UL, 0xbbaa3a52UL, 0xe2147c50UL, 0xd57ebe51UL,
+ 0xe839e25aUL, 0xdf53205bUL, 0x86ed6659UL, 0xb187a458UL, 0x3491eb5dUL,
+ 0x03fb295cUL, 0x5a456f5eUL, 0x6d2fad5fUL, 0x801b35e1UL, 0xb771f7e0UL,
+ 0xeecfb1e2UL, 0xd9a573e3UL, 0x5cb33ce6UL, 0x6bd9fee7UL, 0x3267b8e5UL,
+ 0x050d7ae4UL, 0x384a26efUL, 0x0f20e4eeUL, 0x569ea2ecUL, 0x61f460edUL,
+ 0xe4e22fe8UL, 0xd388ede9UL, 0x8a36abebUL, 0xbd5c69eaUL, 0xf0b813fdUL,
+ 0xc7d2d1fcUL, 0x9e6c97feUL, 0xa90655ffUL, 0x2c101afaUL, 0x1b7ad8fbUL,
+ 0x42c49ef9UL, 0x75ae5cf8UL, 0x48e900f3UL, 0x7f83c2f2UL, 0x263d84f0UL,
+ 0x115746f1UL, 0x944109f4UL, 0xa32bcbf5UL, 0xfa958df7UL, 0xcdff4ff6UL,
+ 0x605d78d9UL, 0x5737bad8UL, 0x0e89fcdaUL, 0x39e33edbUL, 0xbcf571deUL,
+ 0x8b9fb3dfUL, 0xd221f5ddUL, 0xe54b37dcUL, 0xd80c6bd7UL, 0xef66a9d6UL,
+ 0xb6d8efd4UL, 0x81b22dd5UL, 0x04a462d0UL, 0x33cea0d1UL, 0x6a70e6d3UL,
+ 0x5d1a24d2UL, 0x10fe5ec5UL, 0x27949cc4UL, 0x7e2adac6UL, 0x494018c7UL,
+ 0xcc5657c2UL, 0xfb3c95c3UL, 0xa282d3c1UL, 0x95e811c0UL, 0xa8af4dcbUL,
+ 0x9fc58fcaUL, 0xc67bc9c8UL, 0xf1110bc9UL, 0x740744ccUL, 0x436d86cdUL,
+ 0x1ad3c0cfUL, 0x2db902ceUL, 0x4096af91UL, 0x77fc6d90UL, 0x2e422b92UL,
+ 0x1928e993UL, 0x9c3ea696UL, 0xab546497UL, 0xf2ea2295UL, 0xc580e094UL,
+ 0xf8c7bc9fUL, 0xcfad7e9eUL, 0x9613389cUL, 0xa179fa9dUL, 0x246fb598UL,
+ 0x13057799UL, 0x4abb319bUL, 0x7dd1f39aUL, 0x3035898dUL, 0x075f4b8cUL,
+ 0x5ee10d8eUL, 0x698bcf8fUL, 0xec9d808aUL, 0xdbf7428bUL, 0x82490489UL,
+ 0xb523c688UL, 0x88649a83UL, 0xbf0e5882UL, 0xe6b01e80UL, 0xd1dadc81UL,
+ 0x54cc9384UL, 0x63a65185UL, 0x3a181787UL, 0x0d72d586UL, 0xa0d0e2a9UL,
+ 0x97ba20a8UL, 0xce0466aaUL, 0xf96ea4abUL, 0x7c78ebaeUL, 0x4b1229afUL,
+ 0x12ac6fadUL, 0x25c6adacUL, 0x1881f1a7UL, 0x2feb33a6UL, 0x765575a4UL,
+ 0x413fb7a5UL, 0xc429f8a0UL, 0xf3433aa1UL, 0xaafd7ca3UL, 0x9d97bea2UL,
+ 0xd073c4b5UL, 0xe71906b4UL, 0xbea740b6UL, 0x89cd82b7UL, 0x0cdbcdb2UL,
+ 0x3bb10fb3UL, 0x620f49b1UL, 0x55658bb0UL, 0x6822d7bbUL, 0x5f4815baUL,
+ 0x06f653b8UL, 0x319c91b9UL, 0xb48adebcUL, 0x83e01cbdUL, 0xda5e5abfUL,
+ 0xed3498beUL
+ },
+ {
+ 0x00000000UL, 0x6567bcb8UL, 0x8bc809aaUL, 0xeeafb512UL, 0x5797628fUL,
+ 0x32f0de37UL, 0xdc5f6b25UL, 0xb938d79dUL, 0xef28b4c5UL, 0x8a4f087dUL,
+ 0x64e0bd6fUL, 0x018701d7UL, 0xb8bfd64aUL, 0xddd86af2UL, 0x3377dfe0UL,
+ 0x56106358UL, 0x9f571950UL, 0xfa30a5e8UL, 0x149f10faUL, 0x71f8ac42UL,
+ 0xc8c07bdfUL, 0xada7c767UL, 0x43087275UL, 0x266fcecdUL, 0x707fad95UL,
+ 0x1518112dUL, 0xfbb7a43fUL, 0x9ed01887UL, 0x27e8cf1aUL, 0x428f73a2UL,
+ 0xac20c6b0UL, 0xc9477a08UL, 0x3eaf32a0UL, 0x5bc88e18UL, 0xb5673b0aUL,
+ 0xd00087b2UL, 0x6938502fUL, 0x0c5fec97UL, 0xe2f05985UL, 0x8797e53dUL,
+ 0xd1878665UL, 0xb4e03addUL, 0x5a4f8fcfUL, 0x3f283377UL, 0x8610e4eaUL,
+ 0xe3775852UL, 0x0dd8ed40UL, 0x68bf51f8UL, 0xa1f82bf0UL, 0xc49f9748UL,
+ 0x2a30225aUL, 0x4f579ee2UL, 0xf66f497fUL, 0x9308f5c7UL, 0x7da740d5UL,
+ 0x18c0fc6dUL, 0x4ed09f35UL, 0x2bb7238dUL, 0xc518969fUL, 0xa07f2a27UL,
+ 0x1947fdbaUL, 0x7c204102UL, 0x928ff410UL, 0xf7e848a8UL, 0x3d58149bUL,
+ 0x583fa823UL, 0xb6901d31UL, 0xd3f7a189UL, 0x6acf7614UL, 0x0fa8caacUL,
+ 0xe1077fbeUL, 0x8460c306UL, 0xd270a05eUL, 0xb7171ce6UL, 0x59b8a9f4UL,
+ 0x3cdf154cUL, 0x85e7c2d1UL, 0xe0807e69UL, 0x0e2fcb7bUL, 0x6b4877c3UL,
+ 0xa20f0dcbUL, 0xc768b173UL, 0x29c70461UL, 0x4ca0b8d9UL, 0xf5986f44UL,
+ 0x90ffd3fcUL, 0x7e5066eeUL, 0x1b37da56UL, 0x4d27b90eUL, 0x284005b6UL,
+ 0xc6efb0a4UL, 0xa3880c1cUL, 0x1ab0db81UL, 0x7fd76739UL, 0x9178d22bUL,
+ 0xf41f6e93UL, 0x03f7263bUL, 0x66909a83UL, 0x883f2f91UL, 0xed589329UL,
+ 0x546044b4UL, 0x3107f80cUL, 0xdfa84d1eUL, 0xbacff1a6UL, 0xecdf92feUL,
+ 0x89b82e46UL, 0x67179b54UL, 0x027027ecUL, 0xbb48f071UL, 0xde2f4cc9UL,
+ 0x3080f9dbUL, 0x55e74563UL, 0x9ca03f6bUL, 0xf9c783d3UL, 0x176836c1UL,
+ 0x720f8a79UL, 0xcb375de4UL, 0xae50e15cUL, 0x40ff544eUL, 0x2598e8f6UL,
+ 0x73888baeUL, 0x16ef3716UL, 0xf8408204UL, 0x9d273ebcUL, 0x241fe921UL,
+ 0x41785599UL, 0xafd7e08bUL, 0xcab05c33UL, 0x3bb659edUL, 0x5ed1e555UL,
+ 0xb07e5047UL, 0xd519ecffUL, 0x6c213b62UL, 0x094687daUL, 0xe7e932c8UL,
+ 0x828e8e70UL, 0xd49eed28UL, 0xb1f95190UL, 0x5f56e482UL, 0x3a31583aUL,
+ 0x83098fa7UL, 0xe66e331fUL, 0x08c1860dUL, 0x6da63ab5UL, 0xa4e140bdUL,
+ 0xc186fc05UL, 0x2f294917UL, 0x4a4ef5afUL, 0xf3762232UL, 0x96119e8aUL,
+ 0x78be2b98UL, 0x1dd99720UL, 0x4bc9f478UL, 0x2eae48c0UL, 0xc001fdd2UL,
+ 0xa566416aUL, 0x1c5e96f7UL, 0x79392a4fUL, 0x97969f5dUL, 0xf2f123e5UL,
+ 0x05196b4dUL, 0x607ed7f5UL, 0x8ed162e7UL, 0xebb6de5fUL, 0x528e09c2UL,
+ 0x37e9b57aUL, 0xd9460068UL, 0xbc21bcd0UL, 0xea31df88UL, 0x8f566330UL,
+ 0x61f9d622UL, 0x049e6a9aUL, 0xbda6bd07UL, 0xd8c101bfUL, 0x366eb4adUL,
+ 0x53090815UL, 0x9a4e721dUL, 0xff29cea5UL, 0x11867bb7UL, 0x74e1c70fUL,
+ 0xcdd91092UL, 0xa8beac2aUL, 0x46111938UL, 0x2376a580UL, 0x7566c6d8UL,
+ 0x10017a60UL, 0xfeaecf72UL, 0x9bc973caUL, 0x22f1a457UL, 0x479618efUL,
+ 0xa939adfdUL, 0xcc5e1145UL, 0x06ee4d76UL, 0x6389f1ceUL, 0x8d2644dcUL,
+ 0xe841f864UL, 0x51792ff9UL, 0x341e9341UL, 0xdab12653UL, 0xbfd69aebUL,
+ 0xe9c6f9b3UL, 0x8ca1450bUL, 0x620ef019UL, 0x07694ca1UL, 0xbe519b3cUL,
+ 0xdb362784UL, 0x35999296UL, 0x50fe2e2eUL, 0x99b95426UL, 0xfcdee89eUL,
+ 0x12715d8cUL, 0x7716e134UL, 0xce2e36a9UL, 0xab498a11UL, 0x45e63f03UL,
+ 0x208183bbUL, 0x7691e0e3UL, 0x13f65c5bUL, 0xfd59e949UL, 0x983e55f1UL,
+ 0x2106826cUL, 0x44613ed4UL, 0xaace8bc6UL, 0xcfa9377eUL, 0x38417fd6UL,
+ 0x5d26c36eUL, 0xb389767cUL, 0xd6eecac4UL, 0x6fd61d59UL, 0x0ab1a1e1UL,
+ 0xe41e14f3UL, 0x8179a84bUL, 0xd769cb13UL, 0xb20e77abUL, 0x5ca1c2b9UL,
+ 0x39c67e01UL, 0x80fea99cUL, 0xe5991524UL, 0x0b36a036UL, 0x6e511c8eUL,
+ 0xa7166686UL, 0xc271da3eUL, 0x2cde6f2cUL, 0x49b9d394UL, 0xf0810409UL,
+ 0x95e6b8b1UL, 0x7b490da3UL, 0x1e2eb11bUL, 0x483ed243UL, 0x2d596efbUL,
+ 0xc3f6dbe9UL, 0xa6916751UL, 0x1fa9b0ccUL, 0x7ace0c74UL, 0x9461b966UL,
+ 0xf10605deUL
+#endif
+ }
+};
diff --git a/src/gzip/ftgzip.c b/src/gzip/ftgzip.c
index 8f98a7d..e803000 100644
--- a/src/gzip/ftgzip.c
+++ b/src/gzip/ftgzip.c
@@ -69,10 +69,21 @@
/* */
/* so that configuration with `FT_CONFIG_OPTION_SYSTEM_ZLIB' might */
/* include the wrong `zconf.h' file, leading to errors. */
-#include "zlib.h"
-#undef SLOW
-#define SLOW 1 /* we can't use asm-optimized sources here! */
+ /* `HAVE_HIDDEN` should be defined if */
+ /* */
+ /* __attribute__((visibility("hidden"))) */
+ /* */
+ /* is supported by the compiler, which prevents internal symbols from */
+ /* being exported by the library. */
+#if defined( __GNUC__ ) || defined( __clang__ )
+#define HAVE_HIDDEN 1
+#define ZEXPORT
+#define ZEXTERN static
+#endif
+
+#define Z_SOLO 1
+#define Z_FREETYPE 1
#if defined( _MSC_VER ) /* Visual C++ (and Intel C++) */
/* We disable the warning `conversion from XXX to YYY, */
@@ -83,24 +94,23 @@
#pragma warning( disable : 4244 )
#endif /* _MSC_VER */
- /* Urgh. `inflate_mask' must not be declared twice -- C++ doesn't like
- this. We temporarily disable it and load all necessary header files. */
-#define NO_INFLATE_MASK
-#include "zutil.h"
-#include "inftrees.h"
-#include "infblock.h"
-#include "infcodes.h"
-#include "infutil.h"
-#undef NO_INFLATE_MASK
-
- /* infutil.c must be included before infcodes.c */
+#if defined( __GNUC__ )
+#pragma GCC diagnostic push
+#pragma GCC diagnostic ignored "-Wstrict-prototypes"
+#pragma GCC diagnostic ignored "-Wimplicit-fallthrough"
+#pragma GCC diagnostic ignored "-Wredundant-decls"
+#endif
+
#include "zutil.c"
-#include "inftrees.c"
-#include "infutil.c"
-#include "infcodes.c"
-#include "infblock.c"
+#include "inffast.c"
#include "inflate.c"
+#include "inftrees.c"
#include "adler32.c"
+#include "crc32.c"
+
+#if defined( __GNUC__ )
+#pragma GCC diagnostic pop
+#endif
#if defined( _MSC_VER )
#pragma warning( pop )
@@ -150,7 +160,7 @@
#if !defined( FT_CONFIG_OPTION_SYSTEM_ZLIB ) && !defined( USE_ZLIB_ZCALLOC )
- local voidpf
+ voidpf ZLIB_INTERNAL
zcalloc ( voidpf opaque,
unsigned items,
unsigned size )
@@ -158,7 +168,8 @@
return ft_gzip_alloc( opaque, items, size );
}
- local void
+
+ void ZLIB_INTERNAL
zcfree( voidpf opaque,
voidpf ptr )
{
@@ -751,16 +762,7 @@
stream.zfree = ft_gzip_free;
stream.opaque = memory;
- /* This is a temporary fix and will be removed once the internal
- * copy of zlib is updated to the newest version. The `|32' flag
- * is only supported in the new versions of zlib to enable gzip
- * encoded header.
- */
-#ifdef FT_CONFIG_OPTION_SYSTEM_ZLIB
err = inflateInit2( &stream, MAX_WBITS|32 );
-#else
- err = inflateInit2( &stream, MAX_WBITS );
-#endif
if ( err != Z_OK )
return FT_THROW( Invalid_Argument );
diff --git a/src/gzip/ftzconf.h b/src/gzip/ftzconf.h
index 3abf0ba..5e1d68a 100644
--- a/src/gzip/ftzconf.h
+++ b/src/gzip/ftzconf.h
@@ -1,109 +1,255 @@
/* zconf.h -- configuration of the zlib compression library
- * Copyright (C) 1995-2002 Jean-loup Gailly.
+ * Copyright (C) 1995-2016 Jean-loup Gailly, Mark Adler
* For conditions of distribution and use, see copyright notice in zlib.h
*/
/* @(#) $Id$ */
-#ifndef _ZCONF_H
-#define _ZCONF_H
+#ifndef ZCONF_H
+#define ZCONF_H
/*
* If you *really* need a unique prefix for all types and library functions,
* compile with -DZ_PREFIX. The "standard" zlib should be compiled without it.
+ * Even better than compiling with -DZ_PREFIX would be to use configure to set
+ * this permanently in zconf.h using "./configure --zprefix".
*/
-#ifdef Z_PREFIX
-# define deflateInit_ z_deflateInit_
-# define deflate z_deflate
-# define deflateEnd z_deflateEnd
-# define inflateInit_ z_inflateInit_
-# define inflate z_inflate
-# define inflateEnd z_inflateEnd
-# define deflateInit2_ z_deflateInit2_
-# define deflateSetDictionary z_deflateSetDictionary
-# define deflateCopy z_deflateCopy
-# define deflateReset z_deflateReset
-# define deflateParams z_deflateParams
-# define inflateInit2_ z_inflateInit2_
-# define inflateSetDictionary z_inflateSetDictionary
-# define inflateSync z_inflateSync
-# define inflateSyncPoint z_inflateSyncPoint
-# define inflateReset z_inflateReset
-# define compress z_compress
-# define compress2 z_compress2
-# define uncompress z_uncompress
-# define adler32 z_adler32
-# define crc32 z_crc32
-# define get_crc_table z_get_crc_table
-
-# define Byte z_Byte
-# define uInt z_uInt
-# define uLong z_uLong
-# define Bytef z_Bytef
-# define charf z_charf
-# define intf z_intf
-# define uIntf z_uIntf
-# define uLongf z_uLongf
-# define voidpf z_voidpf
-# define voidp z_voidp
-#endif
-
-#if (defined(_WIN32) || defined(__WIN32__)) && !defined(WIN32)
-# define WIN32
-#endif
-#if defined(__GNUC__) || defined(WIN32) || defined(__386__) || defined(i386)
-# ifndef __32BIT__
-# define __32BIT__
+#ifdef Z_PREFIX /* may be set to #if 1 by ./configure */
+# define Z_PREFIX_SET
+
+/* all linked symbols and init macros */
+# define _dist_code z__dist_code
+# define _length_code z__length_code
+# define _tr_align z__tr_align
+# define _tr_flush_bits z__tr_flush_bits
+# define _tr_flush_block z__tr_flush_block
+# define _tr_init z__tr_init
+# define _tr_stored_block z__tr_stored_block
+# define _tr_tally z__tr_tally
+# define adler32 z_adler32
+# define adler32_combine z_adler32_combine
+# define adler32_combine64 z_adler32_combine64
+# define adler32_z z_adler32_z
+# ifndef Z_SOLO
+# define compress z_compress
+# define compress2 z_compress2
+# define compressBound z_compressBound
+# endif
+# define crc32 z_crc32
+# define crc32_combine z_crc32_combine
+# define crc32_combine64 z_crc32_combine64
+# define crc32_z z_crc32_z
+# define deflate z_deflate
+# define deflateBound z_deflateBound
+# define deflateCopy z_deflateCopy
+# define deflateEnd z_deflateEnd
+# define deflateGetDictionary z_deflateGetDictionary
+# define deflateInit z_deflateInit
+# define deflateInit2 z_deflateInit2
+# define deflateInit2_ z_deflateInit2_
+# define deflateInit_ z_deflateInit_
+# define deflateParams z_deflateParams
+# define deflatePending z_deflatePending
+# define deflatePrime z_deflatePrime
+# define deflateReset z_deflateReset
+# define deflateResetKeep z_deflateResetKeep
+# define deflateSetDictionary z_deflateSetDictionary
+# define deflateSetHeader z_deflateSetHeader
+# define deflateTune z_deflateTune
+# define deflate_copyright z_deflate_copyright
+# define get_crc_table z_get_crc_table
+# ifndef Z_SOLO
+# define gz_error z_gz_error
+# define gz_intmax z_gz_intmax
+# define gz_strwinerror z_gz_strwinerror
+# define gzbuffer z_gzbuffer
+# define gzclearerr z_gzclearerr
+# define gzclose z_gzclose
+# define gzclose_r z_gzclose_r
+# define gzclose_w z_gzclose_w
+# define gzdirect z_gzdirect
+# define gzdopen z_gzdopen
+# define gzeof z_gzeof
+# define gzerror z_gzerror
+# define gzflush z_gzflush
+# define gzfread z_gzfread
+# define gzfwrite z_gzfwrite
+# define gzgetc z_gzgetc
+# define gzgetc_ z_gzgetc_
+# define gzgets z_gzgets
+# define gzoffset z_gzoffset
+# define gzoffset64 z_gzoffset64
+# define gzopen z_gzopen
+# define gzopen64 z_gzopen64
+# ifdef _WIN32
+# define gzopen_w z_gzopen_w
+# endif
+# define gzprintf z_gzprintf
+# define gzputc z_gzputc
+# define gzputs z_gzputs
+# define gzread z_gzread
+# define gzrewind z_gzrewind
+# define gzseek z_gzseek
+# define gzseek64 z_gzseek64
+# define gzsetparams z_gzsetparams
+# define gztell z_gztell
+# define gztell64 z_gztell64
+# define gzungetc z_gzungetc
+# define gzvprintf z_gzvprintf
+# define gzwrite z_gzwrite
+# endif
+# define inflate z_inflate
+# define inflateBack z_inflateBack
+# define inflateBackEnd z_inflateBackEnd
+# define inflateBackInit z_inflateBackInit
+# define inflateBackInit_ z_inflateBackInit_
+# define inflateCodesUsed z_inflateCodesUsed
+# define inflateCopy z_inflateCopy
+# define inflateEnd z_inflateEnd
+# define inflateGetDictionary z_inflateGetDictionary
+# define inflateGetHeader z_inflateGetHeader
+# define inflateInit z_inflateInit
+# define inflateInit2 z_inflateInit2
+# define inflateInit2_ z_inflateInit2_
+# define inflateInit_ z_inflateInit_
+# define inflateMark z_inflateMark
+# define inflatePrime z_inflatePrime
+# define inflateReset z_inflateReset
+# define inflateReset2 z_inflateReset2
+# define inflateResetKeep z_inflateResetKeep
+# define inflateSetDictionary z_inflateSetDictionary
+# define inflateSync z_inflateSync
+# define inflateSyncPoint z_inflateSyncPoint
+# define inflateUndermine z_inflateUndermine
+# define inflateValidate z_inflateValidate
+# define inflate_copyright z_inflate_copyright
+# define inflate_fast z_inflate_fast
+# define inflate_table z_inflate_table
+# ifndef Z_SOLO
+# define uncompress z_uncompress
+# define uncompress2 z_uncompress2
+# endif
+# define zError z_zError
+# ifndef Z_SOLO
+# define zcalloc z_zcalloc
+# define zcfree z_zcfree
+# endif
+# define zlibCompileFlags z_zlibCompileFlags
+# define zlibVersion z_zlibVersion
+
+/* all zlib typedefs in zlib.h and zconf.h */
+# define Byte z_Byte
+# define Bytef z_Bytef
+# define alloc_func z_alloc_func
+# define charf z_charf
+# define free_func z_free_func
+# ifndef Z_SOLO
+# define gzFile z_gzFile
# endif
+# define gz_header z_gz_header
+# define gz_headerp z_gz_headerp
+# define in_func z_in_func
+# define intf z_intf
+# define out_func z_out_func
+# define uInt z_uInt
+# define uIntf z_uIntf
+# define uLong z_uLong
+# define uLongf z_uLongf
+# define voidp z_voidp
+# define voidpc z_voidpc
+# define voidpf z_voidpf
+
+/* all zlib structs in zlib.h and zconf.h */
+# define gz_header_s z_gz_header_s
+# define internal_state z_internal_state
+
#endif
+
#if defined(__MSDOS__) && !defined(MSDOS)
# define MSDOS
#endif
-
-/* WinCE doesn't have errno.h */
-#ifdef _WIN32_WCE
-# define NO_ERRNO_H
+#if (defined(OS_2) || defined(__OS2__)) && !defined(OS2)
+# define OS2
+#endif
+#if defined(_WINDOWS) && !defined(WINDOWS)
+# define WINDOWS
+#endif
+#if defined(_WIN32) || defined(_WIN32_WCE) || defined(__WIN32__)
+# ifndef WIN32
+# define WIN32
+# endif
+#endif
+#if (defined(MSDOS) || defined(OS2) || defined(WINDOWS)) && !defined(WIN32)
+# if !defined(__GNUC__) && !defined(__FLAT__) && !defined(__386__)
+# ifndef SYS16BIT
+# define SYS16BIT
+# endif
+# endif
#endif
-
/*
* Compile with -DMAXSEG_64K if the alloc function cannot allocate more
* than 64k bytes at a time (needed on systems with 16-bit int).
*/
-#if defined(MSDOS) && !defined(__32BIT__)
+#ifdef SYS16BIT
# define MAXSEG_64K
#endif
#ifdef MSDOS
# define UNALIGNED_OK
#endif
-#if (defined(MSDOS) || defined(_WINDOWS) || defined(WIN32)) && !defined(STDC)
-# define STDC
-#endif
-#if defined(__STDC__) || defined(__cplusplus) || defined(__OS2__)
+#ifdef __STDC_VERSION__
# ifndef STDC
# define STDC
# endif
+# if __STDC_VERSION__ >= 199901L
+# ifndef STDC99
+# define STDC99
+# endif
+# endif
+#endif
+#if !defined(STDC) && (defined(__STDC__) || defined(__cplusplus))
+# define STDC
+#endif
+#if !defined(STDC) && (defined(__GNUC__) || defined(__BORLANDC__))
+# define STDC
+#endif
+#if !defined(STDC) && (defined(MSDOS) || defined(WINDOWS) || defined(WIN32))
+# define STDC
+#endif
+#if !defined(STDC) && (defined(OS2) || defined(__HOS_AIX__))
+# define STDC
+#endif
+
+#if defined(__OS400__) && !defined(STDC) /* iSeries (formerly AS/400). */
+# define STDC
#endif
#ifndef STDC
# ifndef const /* cannot use !defined(STDC) && !defined(const) on Mac */
-# define const
+# define const /* note: need a more gentle solution here */
# endif
#endif
-/* Some Mac compilers merge all .h files incorrectly: */
-#if defined(__MWERKS__) || defined(applec) ||defined(THINK_C) ||defined(__SC__)
-# define NO_DUMMY_DECL
-#endif
-
-/* Old Borland C and LCC incorrectly complains about missing returns: */
-#if defined(__BORLANDC__) && (__BORLANDC__ < 0x500)
-# define NEED_DUMMY_RETURN
+#if defined(ZLIB_CONST) && !defined(z_const)
+# define z_const const
+#else
+# define z_const
#endif
-#if defined(__LCC__)
-# define NEED_DUMMY_RETURN
+#ifdef Z_SOLO
+ typedef unsigned long z_size_t;
+#else
+# define z_longlong long long
+# if defined(NO_SIZE_T)
+ typedef unsigned NO_SIZE_T z_size_t;
+# elif defined(STDC)
+# include <stddef.h>
+ typedef size_t z_size_t;
+# else
+ typedef unsigned long z_size_t;
+# endif
+# undef z_longlong
#endif
/* Maximum value for memLevel in deflateInit2 */
@@ -133,7 +279,7 @@
Of course this will generally degrade compression (there's no free lunch).
The memory requirements for inflate are (in bytes) 1 << windowBits
- that is, 32K for windowBits=15 (default value) plus a few kilobytes
+ that is, 32K for windowBits=15 (default value) plus about 7 kilobytes
for small objects.
*/
@@ -147,75 +293,101 @@
# endif
#endif
+#ifndef Z_ARG /* function prototypes for stdarg */
+# if defined(STDC) || defined(Z_HAVE_STDARG_H)
+# define Z_ARG(args) args
+# else
+# define Z_ARG(args) ()
+# endif
+#endif
+
/* The following definitions for FAR are needed only for MSDOS mixed
* model programming (small or medium model with some far allocations).
* This was tested only with MSC; for other MSDOS compilers you may have
* to define NO_MEMCPY in zutil.h. If you don't need the mixed model,
* just define FAR to be empty.
*/
-#if (defined(M_I86SM) || defined(M_I86MM)) && !defined(__32BIT__)
- /* MSC small or medium model */
-# define SMALL_MEDIUM
-# ifdef _MSC_VER
-# define FAR _far
-# else
-# define FAR far
+#ifdef SYS16BIT
+# if defined(M_I86SM) || defined(M_I86MM)
+ /* MSC small or medium model */
+# define SMALL_MEDIUM
+# ifdef _MSC_VER
+# define FAR _far
+# else
+# define FAR far
+# endif
# endif
-#endif
-#if defined(__BORLANDC__) && (defined(__SMALL__) || defined(__MEDIUM__))
-# ifndef __32BIT__
+# if (defined(__SMALL__) || defined(__MEDIUM__))
+ /* Turbo C small or medium model */
# define SMALL_MEDIUM
-# define FAR _far
+# ifdef __BORLANDC__
+# define FAR _far
+# else
+# define FAR far
+# endif
# endif
#endif
-/* Compile with -DZLIB_DLL for Windows DLL support */
-#if defined(ZLIB_DLL)
-# if defined(_WINDOWS) || defined(WINDOWS)
+#if defined(WINDOWS) || defined(WIN32)
+ /* If building or using zlib as a DLL, define ZLIB_DLL.
+ * This is not mandatory, but it offers a little performance increase.
+ */
+# ifdef ZLIB_DLL
+# if defined(WIN32) && (!defined(__BORLANDC__) || (__BORLANDC__ >= 0x500))
+# ifdef ZLIB_INTERNAL
+# define ZEXTERN extern __declspec(dllexport)
+# else
+# define ZEXTERN extern __declspec(dllimport)
+# endif
+# endif
+# endif /* ZLIB_DLL */
+ /* If building or using zlib with the WINAPI/WINAPIV calling convention,
+ * define ZLIB_WINAPI.
+ * Caution: the standard ZLIB1.DLL is NOT compiled using ZLIB_WINAPI.
+ */
+# ifdef ZLIB_WINAPI
# ifdef FAR
# undef FAR
# endif
# include <windows.h>
-# define ZEXPORT(x) x WINAPI
+ /* No need for _export, use ZLIB.DEF instead. */
+ /* For complete Windows compatibility, use WINAPI, not __stdcall. */
+# define ZEXPORT WINAPI
# ifdef WIN32
-# define ZEXPORTVA(x) x WINAPIV
+# define ZEXPORTVA WINAPIV
# else
-# define ZEXPORTVA(x) x FAR _cdecl _export
+# define ZEXPORTVA FAR CDECL
# endif
# endif
-# if defined (__BORLANDC__)
-# if (__BORLANDC__ >= 0x0500) && defined (WIN32)
-# include <windows.h>
-# define ZEXPORT(x) x __declspec(dllexport) WINAPI
-# define ZEXPORTRVA(x) x __declspec(dllexport) WINAPIV
+#endif
+
+#if defined (__BEOS__)
+# ifdef ZLIB_DLL
+# ifdef ZLIB_INTERNAL
+# define ZEXPORT __declspec(dllexport)
+# define ZEXPORTVA __declspec(dllexport)
# else
-# if defined (_Windows) && defined (__DLL__)
-# define ZEXPORT(x) x _export
-# define ZEXPORTVA(x) x _export
-# endif
+# define ZEXPORT __declspec(dllimport)
+# define ZEXPORTVA __declspec(dllimport)
# endif
# endif
#endif
-
+#ifndef ZEXTERN
+# define ZEXTERN extern
+#endif
#ifndef ZEXPORT
-# define ZEXPORT(x) static x
+# define ZEXPORT
#endif
#ifndef ZEXPORTVA
-# define ZEXPORTVA(x) static x
-#endif
-#ifndef ZEXTERN
-# define ZEXTERN(x) static x
-#endif
-#ifndef ZEXTERNDEF
-# define ZEXTERNDEF(x) static x
+# define ZEXPORTVA
#endif
#ifndef FAR
-# define FAR
+# define FAR
#endif
-#if !defined(MACOS) && !defined(TARGET_OS_MAC)
+#if !defined(__MACTYPES__)
typedef unsigned char Byte; /* 8 bits */
#endif
typedef unsigned int uInt; /* 16 bits or more */
@@ -233,52 +405,130 @@ typedef uInt FAR uIntf;
typedef uLong FAR uLongf;
#ifdef STDC
- typedef void FAR *voidpf;
- typedef void *voidp;
+ typedef void const *voidpc;
+ typedef void FAR *voidpf;
+ typedef void *voidp;
+#else
+ typedef Byte const *voidpc;
+ typedef Byte FAR *voidpf;
+ typedef Byte *voidp;
+#endif
+
+#if !defined(Z_U4) && !defined(Z_SOLO) && defined(STDC)
+# include <limits.h>
+# if (UINT_MAX == 0xffffffffUL)
+# define Z_U4 unsigned
+# elif (ULONG_MAX == 0xffffffffUL)
+# define Z_U4 unsigned long
+# elif (USHRT_MAX == 0xffffffffUL)
+# define Z_U4 unsigned short
+# endif
+#endif
+
+#ifdef Z_U4
+ typedef Z_U4 z_crc_t;
#else
- typedef Byte FAR *voidpf;
- typedef Byte *voidp;
+ typedef unsigned long z_crc_t;
+#endif
+
+#ifdef HAVE_UNISTD_H /* may be set to #if 1 by ./configure */
+# define Z_HAVE_UNISTD_H
#endif
-#ifdef HAVE_UNISTD_H
-# include <sys/types.h> /* for off_t */
-# include <unistd.h> /* for SEEK_* and off_t */
-# define z_off_t off_t
+#ifdef HAVE_STDARG_H /* may be set to #if 1 by ./configure */
+# define Z_HAVE_STDARG_H
#endif
-#ifndef SEEK_SET
+
+#ifdef STDC
+# ifndef Z_SOLO
+# include <sys/types.h> /* for off_t */
+# endif
+#endif
+
+#if defined(STDC) || defined(Z_HAVE_STDARG_H)
+# ifndef Z_SOLO
+# include <stdarg.h> /* for va_list */
+# endif
+#endif
+
+#ifdef _WIN32
+# ifndef Z_SOLO
+# include <stddef.h> /* for wchar_t */
+# endif
+#endif
+
+/* a little trick to accommodate both "#define _LARGEFILE64_SOURCE" and
+ * "#define _LARGEFILE64_SOURCE 1" as requesting 64-bit operations, (even
+ * though the former does not conform to the LFS document), but considering
+ * both "#undef _LARGEFILE64_SOURCE" and "#define _LARGEFILE64_SOURCE 0" as
+ * equivalently requesting no 64-bit operations
+ */
+#if defined(_LARGEFILE64_SOURCE) && -_LARGEFILE64_SOURCE - -1 == 1
+# undef _LARGEFILE64_SOURCE
+#endif
+
+#if defined(__WATCOMC__) && !defined(Z_HAVE_UNISTD_H)
+# define Z_HAVE_UNISTD_H
+#endif
+#ifndef Z_SOLO
+# if defined(Z_HAVE_UNISTD_H) || defined(_LARGEFILE64_SOURCE)
+# include <unistd.h> /* for SEEK_*, off_t, and _LFS64_LARGEFILE */
+# ifdef VMS
+# include <unixio.h> /* for off_t */
+# endif
+# ifndef z_off_t
+# define z_off_t off_t
+# endif
+# endif
+#endif
+
+#if defined(_LFS64_LARGEFILE) && _LFS64_LARGEFILE-0
+# define Z_LFS64
+#endif
+
+#if defined(_LARGEFILE64_SOURCE) && defined(Z_LFS64)
+# define Z_LARGE64
+#endif
+
+#if defined(_FILE_OFFSET_BITS) && _FILE_OFFSET_BITS-0 == 64 && defined(Z_LFS64)
+# define Z_WANT64
+#endif
+
+#if !defined(SEEK_SET) && !defined(Z_SOLO)
# define SEEK_SET 0 /* Seek from beginning of file. */
# define SEEK_CUR 1 /* Seek from current position. */
# define SEEK_END 2 /* Set file pointer to EOF plus "offset" */
#endif
+
#ifndef z_off_t
-# define z_off_t long
+# define z_off_t long
+#endif
+
+#if !defined(_WIN32) && defined(Z_LARGE64)
+# define z_off64_t off64_t
+#else
+# if defined(_WIN32) && !defined(__GNUC__) && !defined(Z_SOLO)
+# define z_off64_t __int64
+# else
+# define z_off64_t z_off_t
+# endif
#endif
/* MVS linker does not support external names larger than 8 bytes */
#if defined(__MVS__)
-# pragma map(deflateInit_,"DEIN")
-# pragma map(deflateInit2_,"DEIN2")
-# pragma map(deflateEnd,"DEEND")
-# pragma map(inflateInit_,"ININ")
-# pragma map(inflateInit2_,"ININ2")
-# pragma map(inflateEnd,"INEND")
-# pragma map(inflateSync,"INSY")
-# pragma map(inflateSetDictionary,"INSEDI")
-# pragma map(inflate_blocks,"INBL")
-# pragma map(inflate_blocks_new,"INBLNE")
-# pragma map(inflate_blocks_free,"INBLFR")
-# pragma map(inflate_blocks_reset,"INBLRE")
-# pragma map(inflate_codes_free,"INCOFR")
-# pragma map(inflate_codes,"INCO")
-# pragma map(inflate_fast,"INFA")
-# pragma map(inflate_flush,"INFLU")
-# pragma map(inflate_mask,"INMA")
-# pragma map(inflate_set_dictionary,"INSEDI2")
-# pragma map(inflate_copyright,"INCOPY")
-# pragma map(inflate_trees_bits,"INTRBI")
-# pragma map(inflate_trees_dynamic,"INTRDY")
-# pragma map(inflate_trees_fixed,"INTRFI")
-# pragma map(inflate_trees_free,"INTRFR")
-#endif
-
-#endif /* _ZCONF_H */
+ #pragma map(deflateInit_,"DEIN")
+ #pragma map(deflateInit2_,"DEIN2")
+ #pragma map(deflateEnd,"DEEND")
+ #pragma map(deflateBound,"DEBND")
+ #pragma map(inflateInit_,"ININ")
+ #pragma map(inflateInit2_,"ININ2")
+ #pragma map(inflateEnd,"INEND")
+ #pragma map(inflateSync,"INSY")
+ #pragma map(inflateSetDictionary,"INSEDI")
+ #pragma map(compressBound,"CMBND")
+ #pragma map(inflate_table,"INTABL")
+ #pragma map(inflate_fast,"INFA")
+ #pragma map(inflate_copyright,"INCOPY")
+#endif
+
+#endif /* ZCONF_H */
diff --git a/src/gzip/gzguts.h b/src/gzip/gzguts.h
new file mode 100644
index 0000000..a27f389
--- /dev/null
+++ b/src/gzip/gzguts.h
@@ -0,0 +1,218 @@
+/* gzguts.h -- zlib internal header definitions for gz* operations
+ * Copyright (C) 2004, 2005, 2010, 2011, 2012, 2013, 2016 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+#ifdef _LARGEFILE64_SOURCE
+# ifndef _LARGEFILE_SOURCE
+# define _LARGEFILE_SOURCE 1
+# endif
+# ifdef _FILE_OFFSET_BITS
+# undef _FILE_OFFSET_BITS
+# endif
+#endif
+
+#ifdef HAVE_HIDDEN
+# define ZLIB_INTERNAL __attribute__((visibility ("hidden")))
+#else
+# define ZLIB_INTERNAL
+#endif
+
+#include <stdio.h>
+#include "zlib.h"
+#ifdef STDC
+# include <string.h>
+# include <stdlib.h>
+# include <limits.h>
+#endif
+
+#ifndef _POSIX_SOURCE
+# define _POSIX_SOURCE
+#endif
+#include <fcntl.h>
+
+#ifdef _WIN32
+# include <stddef.h>
+#endif
+
+#if defined(__TURBOC__) || defined(_MSC_VER) || defined(_WIN32)
+# include <io.h>
+#endif
+
+#if defined(_WIN32) || defined(__CYGWIN__)
+# define WIDECHAR
+#endif
+
+#ifdef WINAPI_FAMILY
+# define open _open
+# define read _read
+# define write _write
+# define close _close
+#endif
+
+#ifdef NO_DEFLATE /* for compatibility with old definition */
+# define NO_GZCOMPRESS
+#endif
+
+#if defined(STDC99) || (defined(__TURBOC__) && __TURBOC__ >= 0x550)
+# ifndef HAVE_VSNPRINTF
+# define HAVE_VSNPRINTF
+# endif
+#endif
+
+#if defined(__CYGWIN__)
+# ifndef HAVE_VSNPRINTF
+# define HAVE_VSNPRINTF
+# endif
+#endif
+
+#if defined(MSDOS) && defined(__BORLANDC__) && (BORLANDC > 0x410)
+# ifndef HAVE_VSNPRINTF
+# define HAVE_VSNPRINTF
+# endif
+#endif
+
+#ifndef HAVE_VSNPRINTF
+# ifdef MSDOS
+/* vsnprintf may exist on some MS-DOS compilers (DJGPP?),
+ but for now we just assume it doesn't. */
+# define NO_vsnprintf
+# endif
+# ifdef __TURBOC__
+# define NO_vsnprintf
+# endif
+# ifdef WIN32
+/* In Win32, vsnprintf is available as the "non-ANSI" _vsnprintf. */
+# if !defined(vsnprintf) && !defined(NO_vsnprintf)
+# if !defined(_MSC_VER) || ( defined(_MSC_VER) && _MSC_VER < 1500 )
+# define vsnprintf _vsnprintf
+# endif
+# endif
+# endif
+# ifdef __SASC
+# define NO_vsnprintf
+# endif
+# ifdef VMS
+# define NO_vsnprintf
+# endif
+# ifdef __OS400__
+# define NO_vsnprintf
+# endif
+# ifdef __MVS__
+# define NO_vsnprintf
+# endif
+#endif
+
+/* unlike snprintf (which is required in C99), _snprintf does not guarantee
+ null termination of the result -- however this is only used in gzlib.c where
+ the result is assured to fit in the space provided */
+#if defined(_MSC_VER) && _MSC_VER < 1900
+# define snprintf _snprintf
+#endif
+
+#ifndef local
+# define local static
+#endif
+/* since "static" is used to mean two completely different things in C, we
+ define "local" for the non-static meaning of "static", for readability
+ (compile with -Dlocal if your debugger can't find static symbols) */
+
+/* gz* functions always use library allocation functions */
+#ifndef STDC
+ extern voidp malloc OF((uInt size));
+ extern void free OF((voidpf ptr));
+#endif
+
+/* get errno and strerror definition */
+#if defined UNDER_CE
+# include <windows.h>
+# define zstrerror() gz_strwinerror((DWORD)GetLastError())
+#else
+# ifndef NO_STRERROR
+# include <errno.h>
+# define zstrerror() strerror(errno)
+# else
+# define zstrerror() "stdio error (consult errno)"
+# endif
+#endif
+
+/* provide prototypes for these when building zlib without LFS */
+#if !defined(_LARGEFILE64_SOURCE) || _LFS64_LARGEFILE-0 == 0
+ ZEXTERN gzFile ZEXPORT gzopen64 OF((const char *, const char *));
+ ZEXTERN z_off64_t ZEXPORT gzseek64 OF((gzFile, z_off64_t, int));
+ ZEXTERN z_off64_t ZEXPORT gztell64 OF((gzFile));
+ ZEXTERN z_off64_t ZEXPORT gzoffset64 OF((gzFile));
+#endif
+
+/* default memLevel */
+#if MAX_MEM_LEVEL >= 8
+# define DEF_MEM_LEVEL 8
+#else
+# define DEF_MEM_LEVEL MAX_MEM_LEVEL
+#endif
+
+/* default i/o buffer size -- double this for output when reading (this and
+ twice this must be able to fit in an unsigned type) */
+#define GZBUFSIZE 8192
+
+/* gzip modes, also provide a little integrity check on the passed structure */
+#define GZ_NONE 0
+#define GZ_READ 7247
+#define GZ_WRITE 31153
+#define GZ_APPEND 1 /* mode set to GZ_WRITE after the file is opened */
+
+/* values for gz_state how */
+#define LOOK 0 /* look for a gzip header */
+#define COPY__ 1 /* copy input directly */
+#define GZIP 2 /* decompress a gzip stream */
+
+/* internal gzip file state data structure */
+typedef struct {
+ /* exposed contents for gzgetc() macro */
+ struct gzFile_s x; /* "x" for exposed */
+ /* x.have: number of bytes available at x.next */
+ /* x.next: next output data to deliver or write */
+ /* x.pos: current position in uncompressed data */
+ /* used for both reading and writing */
+ int mode; /* see gzip modes above */
+ int fd; /* file descriptor */
+ char *path; /* path or fd for error messages */
+ unsigned size; /* buffer size, zero if not allocated yet */
+ unsigned want; /* requested buffer size, default is GZBUFSIZE */
+ unsigned char *in; /* input buffer (double-sized when writing) */
+ unsigned char *out; /* output buffer (double-sized when reading) */
+ int direct; /* 0 if processing gzip, 1 if transparent */
+ /* just for reading */
+ int how; /* 0: get header, 1: copy, 2: decompress */
+ z_off64_t start; /* where the gzip data started, for rewinding */
+ int eof; /* true if end of input file reached */
+ int past; /* true if read requested past end */
+ /* just for writing */
+ int level; /* compression level */
+ int strategy; /* compression strategy */
+ /* seek request */
+ z_off64_t skip; /* amount to skip (already rewound if backwards) */
+ int seek; /* true if seek request pending */
+ /* error information */
+ int err; /* error code */
+ char *msg; /* error message */
+ /* zlib inflate or deflate stream */
+ z_stream strm; /* stream structure in-place (not a pointer) */
+} gz_state;
+typedef gz_state FAR *gz_statep;
+
+/* shared functions */
+void ZLIB_INTERNAL gz_error OF((gz_statep, int, const char *));
+#if defined UNDER_CE
+char ZLIB_INTERNAL *gz_strwinerror OF((DWORD error));
+#endif
+
+/* GT_OFF(x), where x is an unsigned value, is true if x > maximum z_off64_t
+ value -- needed when comparing unsigned to z_off64_t, which is signed
+ (possible z_off64_t types off_t, off64_t, and long are all signed) */
+#ifdef INT_MAX
+# define GT_OFF(x) (sizeof(int) == sizeof(z_off64_t) && (x) > INT_MAX)
+#else
+unsigned ZLIB_INTERNAL gz_intmax OF((void));
+# define GT_OFF(x) (sizeof(int) == sizeof(z_off64_t) && (x) > gz_intmax())
+#endif
diff --git a/src/gzip/infback.c b/src/gzip/infback.c
new file mode 100644
index 0000000..e3470aa
--- /dev/null
+++ b/src/gzip/infback.c
@@ -0,0 +1,640 @@
+/* infback.c -- inflate using a call-back interface
+ * Copyright (C) 1995-2016 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/*
+ This code is largely copied from inflate.c. Normally either infback.o or
+ inflate.o would be linked into an application--not both. The interface
+ with inffast.c is retained so that optimized assembler-coded versions of
+ inflate_fast() can be used with either inflate.c or infback.c.
+ */
+
+#include "zutil.h"
+#include "inftrees.h"
+#include "inflate.h"
+#include "inffast.h"
+
+/* function prototypes */
+local void fixedtables OF((struct inflate_state FAR *state));
+
+/*
+ strm provides memory allocation functions in zalloc and zfree, or
+ Z_NULL to use the library memory allocation functions.
+
+ windowBits is in the range 8..15, and window is a user-supplied
+ window and output buffer that is 2**windowBits bytes.
+ */
+int ZEXPORT inflateBackInit_(
+ z_streamp strm,
+ int windowBits,
+ unsigned char FAR *window,
+ const char *version,
+ int stream_size)
+{
+ struct inflate_state FAR *state;
+
+ if (version == Z_NULL || version[0] != ZLIB_VERSION[0] ||
+ stream_size != (int)(sizeof(z_stream)))
+ return Z_VERSION_ERROR;
+ if (strm == Z_NULL || window == Z_NULL ||
+ windowBits < 8 || windowBits > 15)
+ return Z_STREAM_ERROR;
+ strm->msg = Z_NULL; /* in case we return an error */
+ if (strm->zalloc == (alloc_func)0) {
+#ifdef Z_SOLO
+ return Z_STREAM_ERROR;
+#else
+ strm->zalloc = zcalloc;
+ strm->opaque = (voidpf)0;
+#endif
+ }
+ if (strm->zfree == (free_func)0)
+#ifdef Z_SOLO
+ return Z_STREAM_ERROR;
+#else
+ strm->zfree = zcfree;
+#endif
+ state = (struct inflate_state FAR *)ZALLOC(strm, 1,
+ sizeof(struct inflate_state));
+ if (state == Z_NULL) return Z_MEM_ERROR;
+ Tracev((stderr, "inflate: allocated\n"));
+ strm->state = (struct internal_state FAR *)state;
+ state->dmax = 32768U;
+ state->wbits = (uInt)windowBits;
+ state->wsize = 1U << windowBits;
+ state->window = window;
+ state->wnext = 0;
+ state->whave = 0;
+ return Z_OK;
+}
+
+/*
+ Return state with length and distance decoding tables and index sizes set to
+ fixed code decoding. Normally this returns fixed tables from inffixed.h.
+ If BUILDFIXED is defined, then instead this routine builds the tables the
+ first time it's called, and returns those tables the first time and
+ thereafter. This reduces the size of the code by about 2K bytes, in
+ exchange for a little execution time. However, BUILDFIXED should not be
+ used for threaded applications, since the rewriting of the tables and virgin
+ may not be thread-safe.
+ */
+local void fixedtables(
+ struct inflate_state FAR *state)
+{
+#ifdef BUILDFIXED
+ static int virgin = 1;
+ static code *lenfix, *distfix;
+ static code fixed[544];
+
+ /* build fixed huffman tables if first call (may not be thread safe) */
+ if (virgin) {
+ unsigned sym, bits;
+ static code *next;
+
+ /* literal/length table */
+ sym = 0;
+ while (sym < 144) state->lens[sym++] = 8;
+ while (sym < 256) state->lens[sym++] = 9;
+ while (sym < 280) state->lens[sym++] = 7;
+ while (sym < 288) state->lens[sym++] = 8;
+ next = fixed;
+ lenfix = next;
+ bits = 9;
+ inflate_table(LENS, state->lens, 288, &(next), &(bits), state->work);
+
+ /* distance table */
+ sym = 0;
+ while (sym < 32) state->lens[sym++] = 5;
+ distfix = next;
+ bits = 5;
+ inflate_table(DISTS, state->lens, 32, &(next), &(bits), state->work);
+
+ /* do this just once */
+ virgin = 0;
+ }
+#else /* !BUILDFIXED */
+# include "inffixed.h"
+#endif /* BUILDFIXED */
+ state->lencode = lenfix;
+ state->lenbits = 9;
+ state->distcode = distfix;
+ state->distbits = 5;
+}
+
+/* Macros for inflateBack(): */
+
+/* Load returned state from inflate_fast() */
+#define LOAD() \
+ do { \
+ put = strm->next_out; \
+ left = strm->avail_out; \
+ next = strm->next_in; \
+ have = strm->avail_in; \
+ hold = state->hold; \
+ bits = state->bits; \
+ } while (0)
+
+/* Set state from registers for inflate_fast() */
+#define RESTORE() \
+ do { \
+ strm->next_out = put; \
+ strm->avail_out = left; \
+ strm->next_in = next; \
+ strm->avail_in = have; \
+ state->hold = hold; \
+ state->bits = bits; \
+ } while (0)
+
+/* Clear the input bit accumulator */
+#define INITBITS() \
+ do { \
+ hold = 0; \
+ bits = 0; \
+ } while (0)
+
+/* Assure that some input is available. If input is requested, but denied,
+ then return a Z_BUF_ERROR from inflateBack(). */
+#define PULL() \
+ do { \
+ if (have == 0) { \
+ have = in(in_desc, &next); \
+ if (have == 0) { \
+ next = Z_NULL; \
+ ret = Z_BUF_ERROR; \
+ goto inf_leave; \
+ } \
+ } \
+ } while (0)
+
+/* Get a byte of input into the bit accumulator, or return from inflateBack()
+ with an error if there is no input available. */
+#define PULLBYTE() \
+ do { \
+ PULL(); \
+ have--; \
+ hold += (unsigned long)(*next++) << bits; \
+ bits += 8; \
+ } while (0)
+
+/* Assure that there are at least n bits in the bit accumulator. If there is
+ not enough available input to do that, then return from inflateBack() with
+ an error. */
+#define NEEDBITS(n) \
+ do { \
+ while (bits < (unsigned)(n)) \
+ PULLBYTE(); \
+ } while (0)
+
+/* Return the low n bits of the bit accumulator (n < 16) */
+#define BITS(n) \
+ ((unsigned)hold & ((1U << (n)) - 1))
+
+/* Remove n bits from the bit accumulator */
+#define DROPBITS(n) \
+ do { \
+ hold >>= (n); \
+ bits -= (unsigned)(n); \
+ } while (0)
+
+/* Remove zero to seven bits as needed to go to a byte boundary */
+#define BYTEBITS() \
+ do { \
+ hold >>= bits & 7; \
+ bits -= bits & 7; \
+ } while (0)
+
+/* Assure that some output space is available, by writing out the window
+ if it's full. If the write fails, return from inflateBack() with a
+ Z_BUF_ERROR. */
+#define ROOM() \
+ do { \
+ if (left == 0) { \
+ put = state->window; \
+ left = state->wsize; \
+ state->whave = left; \
+ if (out(out_desc, put, left)) { \
+ ret = Z_BUF_ERROR; \
+ goto inf_leave; \
+ } \
+ } \
+ } while (0)
+
+/*
+ strm provides the memory allocation functions and window buffer on input,
+ and provides information on the unused input on return. For Z_DATA_ERROR
+ returns, strm will also provide an error message.
+
+ in() and out() are the call-back input and output functions. When
+ inflateBack() needs more input, it calls in(). When inflateBack() has
+ filled the window with output, or when it completes with data in the
+ window, it calls out() to write out the data. The application must not
+ change the provided input until in() is called again or inflateBack()
+ returns. The application must not change the window/output buffer until
+ inflateBack() returns.
+
+ in() and out() are called with a descriptor parameter provided in the
+ inflateBack() call. This parameter can be a structure that provides the
+ information required to do the read or write, as well as accumulated
+ information on the input and output such as totals and check values.
+
+ in() should return zero on failure. out() should return non-zero on
+ failure. If either in() or out() fails, than inflateBack() returns a
+ Z_BUF_ERROR. strm->next_in can be checked for Z_NULL to see whether it
+ was in() or out() that caused in the error. Otherwise, inflateBack()
+ returns Z_STREAM_END on success, Z_DATA_ERROR for an deflate format
+ error, or Z_MEM_ERROR if it could not allocate memory for the state.
+ inflateBack() can also return Z_STREAM_ERROR if the input parameters
+ are not correct, i.e. strm is Z_NULL or the state was not initialized.
+ */
+int ZEXPORT inflateBack(
+ z_streamp strm,
+ in_func in,
+ void FAR *in_desc,
+ out_func out,
+ void FAR *out_desc)
+{
+ struct inflate_state FAR *state;
+ z_const unsigned char FAR *next; /* next input */
+ unsigned char FAR *put; /* next output */
+ unsigned have, left; /* available input and output */
+ unsigned long hold; /* bit buffer */
+ unsigned bits; /* bits in bit buffer */
+ unsigned copy; /* number of stored or match bytes to copy */
+ unsigned char FAR *from; /* where to copy match bytes from */
+ code here; /* current decoding table entry */
+ code last; /* parent table entry */
+ unsigned len; /* length to copy for repeats, bits to drop */
+ int ret; /* return code */
+ static const unsigned short order[19] = /* permutation of code lengths */
+ {16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15};
+
+ /* Check that the strm exists and that the state was initialized */
+ if (strm == Z_NULL || strm->state == Z_NULL)
+ return Z_STREAM_ERROR;
+ state = (struct inflate_state FAR *)strm->state;
+
+ /* Reset the state */
+ strm->msg = Z_NULL;
+ state->mode = TYPE;
+ state->last = 0;
+ state->whave = 0;
+ next = strm->next_in;
+ have = next != Z_NULL ? strm->avail_in : 0;
+ hold = 0;
+ bits = 0;
+ put = state->window;
+ left = state->wsize;
+
+ /* Inflate until end of block marked as last */
+ for (;;)
+ switch (state->mode) {
+ case TYPE:
+ /* determine and dispatch block type */
+ if (state->last) {
+ BYTEBITS();
+ state->mode = DONE;
+ break;
+ }
+ NEEDBITS(3);
+ state->last = BITS(1);
+ DROPBITS(1);
+ switch (BITS(2)) {
+ case 0: /* stored block */
+ Tracev((stderr, "inflate: stored block%s\n",
+ state->last ? " (last)" : ""));
+ state->mode = STORED;
+ break;
+ case 1: /* fixed block */
+ fixedtables(state);
+ Tracev((stderr, "inflate: fixed codes block%s\n",
+ state->last ? " (last)" : ""));
+ state->mode = LEN; /* decode codes */
+ break;
+ case 2: /* dynamic block */
+ Tracev((stderr, "inflate: dynamic codes block%s\n",
+ state->last ? " (last)" : ""));
+ state->mode = TABLE;
+ break;
+ case 3:
+ strm->msg = (char *)"invalid block type";
+ state->mode = BAD;
+ }
+ DROPBITS(2);
+ break;
+
+ case STORED:
+ /* get and verify stored block length */
+ BYTEBITS(); /* go to byte boundary */
+ NEEDBITS(32);
+ if ((hold & 0xffff) != ((hold >> 16) ^ 0xffff)) {
+ strm->msg = (char *)"invalid stored block lengths";
+ state->mode = BAD;
+ break;
+ }
+ state->length = (unsigned)hold & 0xffff;
+ Tracev((stderr, "inflate: stored length %u\n",
+ state->length));
+ INITBITS();
+
+ /* copy stored block from input to output */
+ while (state->length != 0) {
+ copy = state->length;
+ PULL();
+ ROOM();
+ if (copy > have) copy = have;
+ if (copy > left) copy = left;
+ zmemcpy(put, next, copy);
+ have -= copy;
+ next += copy;
+ left -= copy;
+ put += copy;
+ state->length -= copy;
+ }
+ Tracev((stderr, "inflate: stored end\n"));
+ state->mode = TYPE;
+ break;
+
+ case TABLE:
+ /* get dynamic table entries descriptor */
+ NEEDBITS(14);
+ state->nlen = BITS(5) + 257;
+ DROPBITS(5);
+ state->ndist = BITS(5) + 1;
+ DROPBITS(5);
+ state->ncode = BITS(4) + 4;
+ DROPBITS(4);
+#ifndef PKZIP_BUG_WORKAROUND
+ if (state->nlen > 286 || state->ndist > 30) {
+ strm->msg = (char *)"too many length or distance symbols";
+ state->mode = BAD;
+ break;
+ }
+#endif
+ Tracev((stderr, "inflate: table sizes ok\n"));
+
+ /* get code length code lengths (not a typo) */
+ state->have = 0;
+ while (state->have < state->ncode) {
+ NEEDBITS(3);
+ state->lens[order[state->have++]] = (unsigned short)BITS(3);
+ DROPBITS(3);
+ }
+ while (state->have < 19)
+ state->lens[order[state->have++]] = 0;
+ state->next = state->codes;
+ state->lencode = (code const FAR *)(state->next);
+ state->lenbits = 7;
+ ret = inflate_table(CODES, state->lens, 19, &(state->next),
+ &(state->lenbits), state->work);
+ if (ret) {
+ strm->msg = (char *)"invalid code lengths set";
+ state->mode = BAD;
+ break;
+ }
+ Tracev((stderr, "inflate: code lengths ok\n"));
+
+ /* get length and distance code code lengths */
+ state->have = 0;
+ while (state->have < state->nlen + state->ndist) {
+ for (;;) {
+ here = state->lencode[BITS(state->lenbits)];
+ if ((unsigned)(here.bits) <= bits) break;
+ PULLBYTE();
+ }
+ if (here.val < 16) {
+ DROPBITS(here.bits);
+ state->lens[state->have++] = here.val;
+ }
+ else {
+ if (here.val == 16) {
+ NEEDBITS(here.bits + 2);
+ DROPBITS(here.bits);
+ if (state->have == 0) {
+ strm->msg = (char *)"invalid bit length repeat";
+ state->mode = BAD;
+ break;
+ }
+ len = (unsigned)(state->lens[state->have - 1]);
+ copy = 3 + BITS(2);
+ DROPBITS(2);
+ }
+ else if (here.val == 17) {
+ NEEDBITS(here.bits + 3);
+ DROPBITS(here.bits);
+ len = 0;
+ copy = 3 + BITS(3);
+ DROPBITS(3);
+ }
+ else {
+ NEEDBITS(here.bits + 7);
+ DROPBITS(here.bits);
+ len = 0;
+ copy = 11 + BITS(7);
+ DROPBITS(7);
+ }
+ if (state->have + copy > state->nlen + state->ndist) {
+ strm->msg = (char *)"invalid bit length repeat";
+ state->mode = BAD;
+ break;
+ }
+ while (copy--)
+ state->lens[state->have++] = (unsigned short)len;
+ }
+ }
+
+ /* handle error breaks in while */
+ if (state->mode == BAD) break;
+
+ /* check for end-of-block code (better have one) */
+ if (state->lens[256] == 0) {
+ strm->msg = (char *)"invalid code -- missing end-of-block";
+ state->mode = BAD;
+ break;
+ }
+
+ /* build code tables -- note: do not change the lenbits or distbits
+ values here (9 and 6) without reading the comments in inftrees.h
+ concerning the ENOUGH constants, which depend on those values */
+ state->next = state->codes;
+ state->lencode = (code const FAR *)(state->next);
+ state->lenbits = 9;
+ ret = inflate_table(LENS, state->lens, state->nlen, &(state->next),
+ &(state->lenbits), state->work);
+ if (ret) {
+ strm->msg = (char *)"invalid literal/lengths set";
+ state->mode = BAD;
+ break;
+ }
+ state->distcode = (code const FAR *)(state->next);
+ state->distbits = 6;
+ ret = inflate_table(DISTS, state->lens + state->nlen, state->ndist,
+ &(state->next), &(state->distbits), state->work);
+ if (ret) {
+ strm->msg = (char *)"invalid distances set";
+ state->mode = BAD;
+ break;
+ }
+ Tracev((stderr, "inflate: codes ok\n"));
+ state->mode = LEN;
+
+ case LEN:
+ /* use inflate_fast() if we have enough input and output */
+ if (have >= 6 && left >= 258) {
+ RESTORE();
+ if (state->whave < state->wsize)
+ state->whave = state->wsize - left;
+ inflate_fast(strm, state->wsize);
+ LOAD();
+ break;
+ }
+
+ /* get a literal, length, or end-of-block code */
+ for (;;) {
+ here = state->lencode[BITS(state->lenbits)];
+ if ((unsigned)(here.bits) <= bits) break;
+ PULLBYTE();
+ }
+ if (here.op && (here.op & 0xf0) == 0) {
+ last = here;
+ for (;;) {
+ here = state->lencode[last.val +
+ (BITS(last.bits + last.op) >> last.bits)];
+ if ((unsigned)(last.bits + here.bits) <= bits) break;
+ PULLBYTE();
+ }
+ DROPBITS(last.bits);
+ }
+ DROPBITS(here.bits);
+ state->length = (unsigned)here.val;
+
+ /* process literal */
+ if (here.op == 0) {
+ Tracevv((stderr, here.val >= 0x20 && here.val < 0x7f ?
+ "inflate: literal '%c'\n" :
+ "inflate: literal 0x%02x\n", here.val));
+ ROOM();
+ *put++ = (unsigned char)(state->length);
+ left--;
+ state->mode = LEN;
+ break;
+ }
+
+ /* process end of block */
+ if (here.op & 32) {
+ Tracevv((stderr, "inflate: end of block\n"));
+ state->mode = TYPE;
+ break;
+ }
+
+ /* invalid code */
+ if (here.op & 64) {
+ strm->msg = (char *)"invalid literal/length code";
+ state->mode = BAD;
+ break;
+ }
+
+ /* length code -- get extra bits, if any */
+ state->extra = (unsigned)(here.op) & 15;
+ if (state->extra != 0) {
+ NEEDBITS(state->extra);
+ state->length += BITS(state->extra);
+ DROPBITS(state->extra);
+ }
+ Tracevv((stderr, "inflate: length %u\n", state->length));
+
+ /* get distance code */
+ for (;;) {
+ here = state->distcode[BITS(state->distbits)];
+ if ((unsigned)(here.bits) <= bits) break;
+ PULLBYTE();
+ }
+ if ((here.op & 0xf0) == 0) {
+ last = here;
+ for (;;) {
+ here = state->distcode[last.val +
+ (BITS(last.bits + last.op) >> last.bits)];
+ if ((unsigned)(last.bits + here.bits) <= bits) break;
+ PULLBYTE();
+ }
+ DROPBITS(last.bits);
+ }
+ DROPBITS(here.bits);
+ if (here.op & 64) {
+ strm->msg = (char *)"invalid distance code";
+ state->mode = BAD;
+ break;
+ }
+ state->offset = (unsigned)here.val;
+
+ /* get distance extra bits, if any */
+ state->extra = (unsigned)(here.op) & 15;
+ if (state->extra != 0) {
+ NEEDBITS(state->extra);
+ state->offset += BITS(state->extra);
+ DROPBITS(state->extra);
+ }
+ if (state->offset > state->wsize - (state->whave < state->wsize ?
+ left : 0)) {
+ strm->msg = (char *)"invalid distance too far back";
+ state->mode = BAD;
+ break;
+ }
+ Tracevv((stderr, "inflate: distance %u\n", state->offset));
+
+ /* copy match from window to output */
+ do {
+ ROOM();
+ copy = state->wsize - state->offset;
+ if (copy < left) {
+ from = put + copy;
+ copy = left - copy;
+ }
+ else {
+ from = put - state->offset;
+ copy = left;
+ }
+ if (copy > state->length) copy = state->length;
+ state->length -= copy;
+ left -= copy;
+ do {
+ *put++ = *from++;
+ } while (--copy);
+ } while (state->length != 0);
+ break;
+
+ case DONE:
+ /* inflate stream terminated properly -- write leftover output */
+ ret = Z_STREAM_END;
+ if (left < state->wsize) {
+ if (out(out_desc, state->window, state->wsize - left))
+ ret = Z_BUF_ERROR;
+ }
+ goto inf_leave;
+
+ case BAD:
+ ret = Z_DATA_ERROR;
+ goto inf_leave;
+
+ default: /* can't happen, but makes compilers happy */
+ ret = Z_STREAM_ERROR;
+ goto inf_leave;
+ }
+
+ /* Return unused input */
+ inf_leave:
+ strm->next_in = next;
+ strm->avail_in = have;
+ return ret;
+}
+
+int ZEXPORT inflateBackEnd(
+ z_streamp strm)
+{
+ if (strm == Z_NULL || strm->state == Z_NULL || strm->zfree == (free_func)0)
+ return Z_STREAM_ERROR;
+ ZFREE(strm, strm->state);
+ strm->state = Z_NULL;
+ Tracev((stderr, "inflate: end\n"));
+ return Z_OK;
+}
diff --git a/src/gzip/infblock.c b/src/gzip/infblock.c
deleted file mode 100644
index 2b4f0c2..0000000
--- a/src/gzip/infblock.c
+++ /dev/null
@@ -1,392 +0,0 @@
-/* infblock.c -- interpret and process block types to last block
- * Copyright (C) 1995-2002 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-#include "zutil.h"
-#include "infblock.h"
-#include "inftrees.h"
-#include "infcodes.h"
-#include "infutil.h"
-
-
-/* simplify the use of the inflate_huft type with some defines */
-#define exop word.what.Exop
-#define bits word.what.Bits
-
-/* Table for deflate from PKZIP's appnote.txt. */
-local const uInt border[] = { /* Order of the bit length code lengths */
- 16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15};
-
-/*
- Notes beyond the 1.93a appnote.txt:
-
- 1. Distance pointers never point before the beginning of the output
- stream.
- 2. Distance pointers can point back across blocks, up to 32k away.
- 3. There is an implied maximum of 7 bits for the bit length table and
- 15 bits for the actual data.
- 4. If only one code exists, then it is encoded using one bit. (Zero
- would be more efficient, but perhaps a little confusing.) If two
- codes exist, they are coded using one bit each (0 and 1).
- 5. There is no way of sending zero distance codes--a dummy must be
- sent if there are none. (History: a pre 2.0 version of PKZIP would
- store blocks with no distance codes, but this was discovered to be
- too harsh a criterion.) Valid only for 1.93a. 2.04c does allow
- zero distance codes, which is sent as one code of zero bits in
- length.
- 6. There are up to 286 literal/length codes. Code 256 represents the
- end-of-block. Note however that the static length tree defines
- 288 codes just to fill out the Huffman codes. Codes 286 and 287
- cannot be used though, since there is no length base or extra bits
- defined for them. Similarily, there are up to 30 distance codes.
- However, static trees define 32 codes (all 5 bits) to fill out the
- Huffman codes, but the last two had better not show up in the data.
- 7. Unzip can check dynamic Huffman blocks for complete code sets.
- The exception is that a single code would not be complete (see #4).
- 8. The five bits following the block type is really the number of
- literal codes sent minus 257.
- 9. Length codes 8,16,16 are interpreted as 13 length codes of 8 bits
- (1+6+6). Therefore, to output three times the length, you output
- three codes (1+1+1), whereas to output four times the same length,
- you only need two codes (1+3). Hmm.
- 10. In the tree reconstruction algorithm, Code = Code + Increment
- only if BitLength(i) is not zero. (Pretty obvious.)
- 11. Correction: 4 Bits: # of Bit Length codes - 4 (4 - 19)
- 12. Note: length code 284 can represent 227-258, but length code 285
- really is 258. The last length deserves its own, short code
- since it gets used a lot in very redundant files. The length
- 258 is special since 258 - 3 (the min match length) is 255.
- 13. The literal/length and distance code bit lengths are read as a
- single stream of lengths. It is possible (and advantageous) for
- a repeat code (16, 17, or 18) to go across the boundary between
- the two sets of lengths.
- */
-
-
-local void inflate_blocks_reset( /* s, z, c) */
-inflate_blocks_statef *s,
-z_streamp z,
-uLongf *c )
-{
- if (c != Z_NULL)
- *c = s->check;
- if (s->mode == BTREE || s->mode == DTREE)
- ZFREE(z, s->sub.trees.blens);
- if (s->mode == CODES)
- inflate_codes_free(s->sub.decode.codes, z);
- s->mode = TYPE;
- s->bitk = 0;
- s->bitb = 0;
- s->read = s->write = s->window;
- if (s->checkfn != Z_NULL)
- z->adler = s->check = (*s->checkfn)(0L, (const Bytef *)Z_NULL, 0);
- Tracev((stderr, "inflate: blocks reset\n"));
-}
-
-
-local inflate_blocks_statef *inflate_blocks_new( /* z, c, w) */
-z_streamp z,
-check_func c,
-uInt w )
-{
- inflate_blocks_statef *s;
-
- if ((s = (inflate_blocks_statef *)ZALLOC
- (z,1,sizeof(struct inflate_blocks_state))) == Z_NULL)
- return s;
- if ((s->hufts =
- (inflate_huft *)ZALLOC(z, sizeof(inflate_huft), MANY)) == Z_NULL)
- {
- ZFREE(z, s);
- return Z_NULL;
- }
- if ((s->window = (Bytef *)ZALLOC(z, 1, w)) == Z_NULL)
- {
- ZFREE(z, s->hufts);
- ZFREE(z, s);
- return Z_NULL;
- }
- s->end = s->window + w;
- s->checkfn = c;
- s->mode = TYPE;
- Tracev((stderr, "inflate: blocks allocated\n"));
- inflate_blocks_reset(s, z, Z_NULL);
- return s;
-}
-
-
-local int inflate_blocks( /* s, z, r) */
-inflate_blocks_statef *s,
-z_streamp z,
-int r )
-{
- uInt t; /* temporary storage */
- uLong b; /* bit buffer */
- uInt k; /* bits in bit buffer */
- Bytef *p; /* input data pointer */
- uInt n; /* bytes available there */
- Bytef *q; /* output window write pointer */
- uInt m; /* bytes to end of window or read pointer */
-
- /* copy input/output information to locals (UPDATE macro restores) */
- LOAD
-
- /* process input based on current state */
- while (1) switch (s->mode)
- {
- case TYPE:
- NEEDBITS(3)
- t = (uInt)b & 7;
- s->last = t & 1;
- switch (t >> 1)
- {
- case 0: /* stored */
- Tracev((stderr, "inflate: stored block%s\n",
- s->last ? " (last)" : ""));
- DUMPBITS(3)
- t = k & 7; /* go to byte boundary */
- DUMPBITS(t)
- s->mode = LENS; /* get length of stored block */
- break;
- case 1: /* fixed */
- Tracev((stderr, "inflate: fixed codes block%s\n",
- s->last ? " (last)" : ""));
- {
- uInt bl, bd;
- inflate_huft *tl, *td;
-
- inflate_trees_fixed(&bl, &bd, (const inflate_huft**)&tl,
- (const inflate_huft**)&td, z);
- s->sub.decode.codes = inflate_codes_new(bl, bd, tl, td, z);
- if (s->sub.decode.codes == Z_NULL)
- {
- r = Z_MEM_ERROR;
- LEAVE
- }
- }
- DUMPBITS(3)
- s->mode = CODES;
- break;
- case 2: /* dynamic */
- Tracev((stderr, "inflate: dynamic codes block%s\n",
- s->last ? " (last)" : ""));
- DUMPBITS(3)
- s->mode = TABLE;
- break;
- case 3: /* illegal */
- DUMPBITS(3)
- s->mode = BAD;
- z->msg = (char*)"invalid block type";
- r = Z_DATA_ERROR;
- LEAVE
- }
- break;
- case LENS:
- NEEDBITS(32)
- if ((((~b) >> 16) & 0xffff) != (b & 0xffff))
- {
- s->mode = BAD;
- z->msg = (char*)"invalid stored block lengths";
- r = Z_DATA_ERROR;
- LEAVE
- }
- s->sub.left = (uInt)b & 0xffff;
- b = k = 0; /* dump bits */
- Tracev((stderr, "inflate: stored length %u\n", s->sub.left));
- s->mode = s->sub.left ? STORED : (s->last ? DRY : TYPE);
- break;
- case STORED:
- if (n == 0)
- LEAVE
- NEEDOUT
- t = s->sub.left;
- if (t > n) t = n;
- if (t > m) t = m;
- zmemcpy(q, p, t);
- p += t; n -= t;
- q += t; m -= t;
- if ((s->sub.left -= t) != 0)
- break;
- Tracev((stderr, "inflate: stored end, %lu total out\n",
- z->total_out + (q >= s->read ? q - s->read :
- (s->end - s->read) + (q - s->window))));
- s->mode = s->last ? DRY : TYPE;
- break;
- case TABLE:
- NEEDBITS(14)
- s->sub.trees.table = t = (uInt)b & 0x3fff;
-#ifndef PKZIP_BUG_WORKAROUND
- if ((t & 0x1f) > 29 || ((t >> 5) & 0x1f) > 29)
- {
- s->mode = BAD;
- z->msg = (char*)"too many length or distance symbols";
- r = Z_DATA_ERROR;
- LEAVE
- }
-#endif
- t = 258 + (t & 0x1f) + ((t >> 5) & 0x1f);
- if ((s->sub.trees.blens = (uIntf*)ZALLOC(z, t, sizeof(uInt))) == Z_NULL)
- {
- r = Z_MEM_ERROR;
- LEAVE
- }
- DUMPBITS(14)
- s->sub.trees.index = 0;
- Tracev((stderr, "inflate: table sizes ok\n"));
- s->mode = BTREE;
- /* fall through */
- case BTREE:
- while (s->sub.trees.index < 4 + (s->sub.trees.table >> 10))
- {
- NEEDBITS(3)
- s->sub.trees.blens[border[s->sub.trees.index++]] = (uInt)b & 7;
- DUMPBITS(3)
- }
- while (s->sub.trees.index < 19)
- s->sub.trees.blens[border[s->sub.trees.index++]] = 0;
- s->sub.trees.bb = 7;
- t = inflate_trees_bits(s->sub.trees.blens, &s->sub.trees.bb,
- &s->sub.trees.tb, s->hufts, z);
- if (t != Z_OK)
- {
- r = t;
- if (r == Z_DATA_ERROR)
- {
- ZFREE(z, s->sub.trees.blens);
- s->mode = BAD;
- }
- LEAVE
- }
- s->sub.trees.index = 0;
- Tracev((stderr, "inflate: bits tree ok\n"));
- s->mode = DTREE;
- /* fall through */
- case DTREE:
- while (t = s->sub.trees.table,
- s->sub.trees.index < 258 + (t & 0x1f) + ((t >> 5) & 0x1f))
- {
- inflate_huft *h;
- uInt i, j, c;
-
- t = s->sub.trees.bb;
- NEEDBITS(t)
- h = s->sub.trees.tb + ((uInt)b & inflate_mask[t]);
- t = h->bits;
- c = h->base;
- if (c < 16)
- {
- DUMPBITS(t)
- s->sub.trees.blens[s->sub.trees.index++] = c;
- }
- else /* c == 16..18 */
- {
- i = c == 18 ? 7 : c - 14;
- j = c == 18 ? 11 : 3;
- NEEDBITS(t + i)
- DUMPBITS(t)
- j += (uInt)b & inflate_mask[i];
- DUMPBITS(i)
- i = s->sub.trees.index;
- t = s->sub.trees.table;
- if (i + j > 258 + (t & 0x1f) + ((t >> 5) & 0x1f) ||
- (c == 16 && i < 1))
- {
- ZFREE(z, s->sub.trees.blens);
- s->mode = BAD;
- z->msg = (char*)"invalid bit length repeat";
- r = Z_DATA_ERROR;
- LEAVE
- }
- c = c == 16 ? s->sub.trees.blens[i - 1] : 0;
- do {
- s->sub.trees.blens[i++] = c;
- } while (--j);
- s->sub.trees.index = i;
- }
- }
- s->sub.trees.tb = Z_NULL;
- {
- uInt bl, bd;
- inflate_huft *tl, *td;
- inflate_codes_statef *c;
-
- bl = 9; /* must be <= 9 for lookahead assumptions */
- bd = 6; /* must be <= 9 for lookahead assumptions */
- t = s->sub.trees.table;
- t = inflate_trees_dynamic(257 + (t & 0x1f), 1 + ((t >> 5) & 0x1f),
- s->sub.trees.blens, &bl, &bd, &tl, &td,
- s->hufts, z);
- if (t != Z_OK)
- {
- if (t == (uInt)Z_DATA_ERROR)
- {
- ZFREE(z, s->sub.trees.blens);
- s->mode = BAD;
- }
- r = t;
- LEAVE
- }
- Tracev((stderr, "inflate: trees ok\n"));
- if ((c = inflate_codes_new(bl, bd, tl, td, z)) == Z_NULL)
- {
- r = Z_MEM_ERROR;
- LEAVE
- }
- s->sub.decode.codes = c;
- }
- ZFREE(z, s->sub.trees.blens);
- s->mode = CODES;
- /* fall through */
- case CODES:
- UPDATE
- if ((r = inflate_codes(s, z, r)) != Z_STREAM_END)
- return inflate_flush(s, z, r);
- r = Z_OK;
- inflate_codes_free(s->sub.decode.codes, z);
- LOAD
- Tracev((stderr, "inflate: codes end, %lu total out\n",
- z->total_out + (q >= s->read ? q - s->read :
- (s->end - s->read) + (q - s->window))));
- if (!s->last)
- {
- s->mode = TYPE;
- break;
- }
- s->mode = DRY;
- /* fall through */
- case DRY:
- FLUSH
- if (s->read != s->write)
- LEAVE
- s->mode = DONE;
- /* fall through */
- case DONE:
- r = Z_STREAM_END;
- LEAVE
- case BAD:
- r = Z_DATA_ERROR;
- LEAVE
- default:
- r = Z_STREAM_ERROR;
- LEAVE
- }
-#ifdef NEED_DUMMY_RETURN
- return 0;
-#endif
-}
-
-
-local int inflate_blocks_free( /* s, z) */
-inflate_blocks_statef *s,
-z_streamp z )
-{
- inflate_blocks_reset(s, z, Z_NULL);
- ZFREE(z, s->window);
- ZFREE(z, s->hufts);
- ZFREE(z, s);
- Tracev((stderr, "inflate: blocks freed\n"));
- return Z_OK;
-}
-
-
diff --git a/src/gzip/infblock.h b/src/gzip/infblock.h
deleted file mode 100644
index c2535a1..0000000
--- a/src/gzip/infblock.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/* infblock.h -- header to use infblock.c
- * Copyright (C) 1995-2002 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* WARNING: this file should *not* be used by applications. It is
- part of the implementation of the compression library and is
- subject to change. Applications should only use zlib.h.
- */
-
-#ifndef _INFBLOCK_H
-#define _INFBLOCK_H
-
-struct inflate_blocks_state;
-typedef struct inflate_blocks_state FAR inflate_blocks_statef;
-
-local inflate_blocks_statef * inflate_blocks_new OF((
- z_streamp z,
- check_func c, /* check function */
- uInt w)); /* window size */
-
-local int inflate_blocks OF((
- inflate_blocks_statef *,
- z_streamp ,
- int)); /* initial return code */
-
-local void inflate_blocks_reset OF((
- inflate_blocks_statef *,
- z_streamp ,
- uLongf *)); /* check value on output */
-
-local int inflate_blocks_free OF((
- inflate_blocks_statef *,
- z_streamp));
-
-#endif /* _INFBLOCK_H */
diff --git a/src/gzip/infcodes.c b/src/gzip/infcodes.c
deleted file mode 100644
index ba30654..0000000
--- a/src/gzip/infcodes.c
+++ /dev/null
@@ -1,254 +0,0 @@
-/* infcodes.c -- process literals and length/distance pairs
- * Copyright (C) 1995-2002 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-#include "zutil.h"
-#include "inftrees.h"
-#include "infblock.h"
-#include "infcodes.h"
-#include "infutil.h"
-
-/* simplify the use of the inflate_huft type with some defines */
-#define exop word.what.Exop
-#define bits word.what.Bits
-
-typedef enum { /* waiting for "i:"=input, "o:"=output, "x:"=nothing */
- START, /* x: set up for LEN */
- LEN, /* i: get length/literal/eob next */
- LENEXT, /* i: getting length extra (have base) */
- DIST, /* i: get distance next */
- DISTEXT, /* i: getting distance extra */
- COPY, /* o: copying bytes in window, waiting for space */
- LIT, /* o: got literal, waiting for output space */
- WASH, /* o: got eob, possibly still output waiting */
- END, /* x: got eob and all data flushed */
- BADCODE} /* x: got error */
-inflate_codes_mode;
-
-/* inflate codes private state */
-struct inflate_codes_state {
-
- /* mode */
- inflate_codes_mode mode; /* current inflate_codes mode */
-
- /* mode dependent information */
- uInt len;
- union {
- struct {
- inflate_huft *tree; /* pointer into tree */
- uInt need; /* bits needed */
- } code; /* if LEN or DIST, where in tree */
- uInt lit; /* if LIT, literal */
- struct {
- uInt get; /* bits to get for extra */
- uInt dist; /* distance back to copy from */
- } copy; /* if EXT or COPY, where and how much */
- } sub; /* submode */
-
- /* mode independent information */
- Byte lbits; /* ltree bits decoded per branch */
- Byte dbits; /* dtree bits decoder per branch */
- inflate_huft *ltree; /* literal/length/eob tree */
- inflate_huft *dtree; /* distance tree */
-
-};
-
-
-local inflate_codes_statef *inflate_codes_new( /* bl, bd, tl, td, z) */
-uInt bl, uInt bd,
-inflate_huft *tl,
-inflate_huft *td, /* need separate declaration for Borland C++ */
-z_streamp z )
-{
- inflate_codes_statef *c;
-
- if ((c = (inflate_codes_statef *)
- ZALLOC(z,1,sizeof(struct inflate_codes_state))) != Z_NULL)
- {
- c->mode = START;
- c->lbits = (Byte)bl;
- c->dbits = (Byte)bd;
- c->ltree = tl;
- c->dtree = td;
- Tracev((stderr, "inflate: codes new\n"));
- }
- return c;
-}
-
-
-local int inflate_codes( /* s, z, r) */
-inflate_blocks_statef *s,
-z_streamp z,
-int r )
-{
- uInt j; /* temporary storage */
- inflate_huft *t; /* temporary pointer */
- uInt e; /* extra bits or operation */
- uLong b; /* bit buffer */
- uInt k; /* bits in bit buffer */
- Bytef *p; /* input data pointer */
- uInt n; /* bytes available there */
- Bytef *q; /* output window write pointer */
- uInt m; /* bytes to end of window or read pointer */
- Bytef *f; /* pointer to copy strings from */
- inflate_codes_statef *c = s->sub.decode.codes; /* codes state */
-
- /* copy input/output information to locals (UPDATE macro restores) */
- LOAD
-
- /* process input and output based on current state */
- while (1) switch (c->mode)
- { /* waiting for "i:"=input, "o:"=output, "x:"=nothing */
- case START: /* x: set up for LEN */
-#ifndef SLOW
- if (m >= 258 && n >= 10)
- {
- UPDATE
- r = inflate_fast(c->lbits, c->dbits, c->ltree, c->dtree, s, z);
- LOAD
- if (r != Z_OK)
- {
- c->mode = r == Z_STREAM_END ? WASH : BADCODE;
- break;
- }
- }
-#endif /* !SLOW */
- c->sub.code.need = c->lbits;
- c->sub.code.tree = c->ltree;
- c->mode = LEN;
- /* fall through */
- case LEN: /* i: get length/literal/eob next */
- j = c->sub.code.need;
- NEEDBITS(j)
- t = c->sub.code.tree + ((uInt)b & inflate_mask[j]);
- DUMPBITS(t->bits)
- e = (uInt)(t->exop);
- if (e == 0) /* literal */
- {
- c->sub.lit = t->base;
- Tracevv((stderr, t->base >= 0x20 && t->base < 0x7f ?
- "inflate: literal '%c'\n" :
- "inflate: literal 0x%02x\n", t->base));
- c->mode = LIT;
- break;
- }
- if (e & 16) /* length */
- {
- c->sub.copy.get = e & 15;
- c->len = t->base;
- c->mode = LENEXT;
- break;
- }
- if ((e & 64) == 0) /* next table */
- {
- c->sub.code.need = e;
- c->sub.code.tree = t + t->base;
- break;
- }
- if (e & 32) /* end of block */
- {
- Tracevv((stderr, "inflate: end of block\n"));
- c->mode = WASH;
- break;
- }
- c->mode = BADCODE; /* invalid code */
- z->msg = (char*)"invalid literal/length code";
- r = Z_DATA_ERROR;
- LEAVE
- case LENEXT: /* i: getting length extra (have base) */
- j = c->sub.copy.get;
- NEEDBITS(j)
- c->len += (uInt)b & inflate_mask[j];
- DUMPBITS(j)
- c->sub.code.need = c->dbits;
- c->sub.code.tree = c->dtree;
- Tracevv((stderr, "inflate: length %u\n", c->len));
- c->mode = DIST;
- /* fall through */
- case DIST: /* i: get distance next */
- j = c->sub.code.need;
- NEEDBITS(j)
- t = c->sub.code.tree + ((uInt)b & inflate_mask[j]);
- DUMPBITS(t->bits)
- e = (uInt)(t->exop);
- if (e & 16) /* distance */
- {
- c->sub.copy.get = e & 15;
- c->sub.copy.dist = t->base;
- c->mode = DISTEXT;
- break;
- }
- if ((e & 64) == 0) /* next table */
- {
- c->sub.code.need = e;
- c->sub.code.tree = t + t->base;
- break;
- }
- c->mode = BADCODE; /* invalid code */
- z->msg = (char*)"invalid distance code";
- r = Z_DATA_ERROR;
- LEAVE
- case DISTEXT: /* i: getting distance extra */
- j = c->sub.copy.get;
- NEEDBITS(j)
- c->sub.copy.dist += (uInt)b & inflate_mask[j];
- DUMPBITS(j)
- Tracevv((stderr, "inflate: distance %u\n", c->sub.copy.dist));
- c->mode = COPY;
- /* fall through */
- case COPY: /* o: copying bytes in window, waiting for space */
- f = q - c->sub.copy.dist;
- while (f < s->window) /* modulo window size-"while" instead */
- f += s->end - s->window; /* of "if" handles invalid distances */
- while (c->len)
- {
- NEEDOUT
- OUTBYTE(*f++)
- if (f == s->end)
- f = s->window;
- c->len--;
- }
- c->mode = START;
- break;
- case LIT: /* o: got literal, waiting for output space */
- NEEDOUT
- OUTBYTE(c->sub.lit)
- c->mode = START;
- break;
- case WASH: /* o: got eob, possibly more output */
- if (k > 7) /* return unused byte, if any */
- {
- Assert(k < 16, "inflate_codes grabbed too many bytes")
- k -= 8;
- n++;
- p--; /* can always return one */
- }
- FLUSH
- if (s->read != s->write)
- LEAVE
- c->mode = END;
- /* fall through */
- case END:
- r = Z_STREAM_END;
- LEAVE
- case BADCODE: /* x: got error */
- r = Z_DATA_ERROR;
- LEAVE
- default:
- r = Z_STREAM_ERROR;
- LEAVE
- }
-#ifdef NEED_DUMMY_RETURN
- return Z_STREAM_ERROR; /* Some dumb compilers complain without this */
-#endif
-}
-
-
-local void inflate_codes_free( /* c, z) */
-inflate_codes_statef *c,
-z_streamp z )
-{
- ZFREE(z, c);
- Tracev((stderr, "inflate: codes free\n"));
-}
diff --git a/src/gzip/infcodes.h b/src/gzip/infcodes.h
deleted file mode 100644
index 154d7f8..0000000
--- a/src/gzip/infcodes.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/* infcodes.h -- header to use infcodes.c
- * Copyright (C) 1995-2002 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* WARNING: this file should *not* be used by applications. It is
- part of the implementation of the compression library and is
- subject to change. Applications should only use zlib.h.
- */
-
-#ifndef _INFCODES_H
-#define _INFCODES_H
-
-struct inflate_codes_state;
-typedef struct inflate_codes_state FAR inflate_codes_statef;
-
-local inflate_codes_statef *inflate_codes_new OF((
- uInt, uInt,
- inflate_huft *, inflate_huft *,
- z_streamp ));
-
-local int inflate_codes OF((
- inflate_blocks_statef *,
- z_streamp ,
- int));
-
-local void inflate_codes_free OF((
- inflate_codes_statef *,
- z_streamp ));
-
-#endif /* _INFCODES_H */
diff --git a/src/gzip/inffast.c b/src/gzip/inffast.c
new file mode 100644
index 0000000..1583181
--- /dev/null
+++ b/src/gzip/inffast.c
@@ -0,0 +1,323 @@
+/* inffast.c -- fast decoding
+ * Copyright (C) 1995-2017 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+#include "zutil.h"
+#include "inftrees.h"
+#include "inflate.h"
+#include "inffast.h"
+
+#ifdef ASMINF
+# pragma message("Assembler code may have bugs -- use at your own risk")
+#else
+
+/*
+ Decode literal, length, and distance codes and write out the resulting
+ literal and match bytes until either not enough input or output is
+ available, an end-of-block is encountered, or a data error is encountered.
+ When large enough input and output buffers are supplied to inflate(), for
+ example, a 16K input buffer and a 64K output buffer, more than 95% of the
+ inflate execution time is spent in this routine.
+
+ Entry assumptions:
+
+ state->mode == LEN
+ strm->avail_in >= 6
+ strm->avail_out >= 258
+ start >= strm->avail_out
+ state->bits < 8
+
+ On return, state->mode is one of:
+
+ LEN -- ran out of enough output space or enough available input
+ TYPE -- reached end of block code, inflate() to interpret next block
+ BAD -- error in block data
+
+ Notes:
+
+ - The maximum input bits used by a length/distance pair is 15 bits for the
+ length code, 5 bits for the length extra, 15 bits for the distance code,
+ and 13 bits for the distance extra. This totals 48 bits, or six bytes.
+ Therefore if strm->avail_in >= 6, then there is enough input to avoid
+ checking for available input while decoding.
+
+ - The maximum bytes that a single length/distance pair can output is 258
+ bytes, which is the maximum length that can be coded. inflate_fast()
+ requires strm->avail_out >= 258 for each loop to avoid checking for
+ output space.
+ */
+void ZLIB_INTERNAL inflate_fast(
+ z_streamp strm,
+ unsigned start)
+{
+ struct inflate_state FAR *state;
+ z_const unsigned char FAR *in; /* local strm->next_in */
+ z_const unsigned char FAR *last; /* have enough input while in < last */
+ unsigned char FAR *out; /* local strm->next_out */
+ unsigned char FAR *beg; /* inflate()'s initial strm->next_out */
+ unsigned char FAR *end; /* while out < end, enough space available */
+#ifdef INFLATE_STRICT
+ unsigned dmax; /* maximum distance from zlib header */
+#endif
+ unsigned wsize; /* window size or zero if not using window */
+ unsigned whave; /* valid bytes in the window */
+ unsigned wnext; /* window write index */
+ unsigned char FAR *window; /* allocated sliding window, if wsize != 0 */
+ unsigned long hold; /* local strm->hold */
+ unsigned bits; /* local strm->bits */
+ code const FAR *lcode; /* local strm->lencode */
+ code const FAR *dcode; /* local strm->distcode */
+ unsigned lmask; /* mask for first level of length codes */
+ unsigned dmask; /* mask for first level of distance codes */
+ code here; /* retrieved table entry */
+ unsigned op; /* code bits, operation, extra bits, or */
+ /* window position, window bytes to copy */
+ unsigned len; /* match length, unused bytes */
+ unsigned dist; /* match distance */
+ unsigned char FAR *from; /* where to copy match from */
+
+ /* copy state to local variables */
+ state = (struct inflate_state FAR *)strm->state;
+ in = strm->next_in;
+ last = in + (strm->avail_in - 5);
+ out = strm->next_out;
+ beg = out - (start - strm->avail_out);
+ end = out + (strm->avail_out - 257);
+#ifdef INFLATE_STRICT
+ dmax = state->dmax;
+#endif
+ wsize = state->wsize;
+ whave = state->whave;
+ wnext = state->wnext;
+ window = state->window;
+ hold = state->hold;
+ bits = state->bits;
+ lcode = state->lencode;
+ dcode = state->distcode;
+ lmask = (1U << state->lenbits) - 1;
+ dmask = (1U << state->distbits) - 1;
+
+ /* decode literals and length/distances until end-of-block or not enough
+ input data or output space */
+ do {
+ if (bits < 15) {
+ hold += (unsigned long)(*in++) << bits;
+ bits += 8;
+ hold += (unsigned long)(*in++) << bits;
+ bits += 8;
+ }
+ here = lcode[hold & lmask];
+ dolen:
+ op = (unsigned)(here.bits);
+ hold >>= op;
+ bits -= op;
+ op = (unsigned)(here.op);
+ if (op == 0) { /* literal */
+ Tracevv((stderr, here.val >= 0x20 && here.val < 0x7f ?
+ "inflate: literal '%c'\n" :
+ "inflate: literal 0x%02x\n", here.val));
+ *out++ = (unsigned char)(here.val);
+ }
+ else if (op & 16) { /* length base */
+ len = (unsigned)(here.val);
+ op &= 15; /* number of extra bits */
+ if (op) {
+ if (bits < op) {
+ hold += (unsigned long)(*in++) << bits;
+ bits += 8;
+ }
+ len += (unsigned)hold & ((1U << op) - 1);
+ hold >>= op;
+ bits -= op;
+ }
+ Tracevv((stderr, "inflate: length %u\n", len));
+ if (bits < 15) {
+ hold += (unsigned long)(*in++) << bits;
+ bits += 8;
+ hold += (unsigned long)(*in++) << bits;
+ bits += 8;
+ }
+ here = dcode[hold & dmask];
+ dodist:
+ op = (unsigned)(here.bits);
+ hold >>= op;
+ bits -= op;
+ op = (unsigned)(here.op);
+ if (op & 16) { /* distance base */
+ dist = (unsigned)(here.val);
+ op &= 15; /* number of extra bits */
+ if (bits < op) {
+ hold += (unsigned long)(*in++) << bits;
+ bits += 8;
+ if (bits < op) {
+ hold += (unsigned long)(*in++) << bits;
+ bits += 8;
+ }
+ }
+ dist += (unsigned)hold & ((1U << op) - 1);
+#ifdef INFLATE_STRICT
+ if (dist > dmax) {
+ strm->msg = (char *)"invalid distance too far back";
+ state->mode = BAD;
+ break;
+ }
+#endif
+ hold >>= op;
+ bits -= op;
+ Tracevv((stderr, "inflate: distance %u\n", dist));
+ op = (unsigned)(out - beg); /* max distance in output */
+ if (dist > op) { /* see if copy from window */
+ op = dist - op; /* distance back in window */
+ if (op > whave) {
+ if (state->sane) {
+ strm->msg =
+ (char *)"invalid distance too far back";
+ state->mode = BAD;
+ break;
+ }
+#ifdef INFLATE_ALLOW_INVALID_DISTANCE_TOOFAR_ARRR
+ if (len <= op - whave) {
+ do {
+ *out++ = 0;
+ } while (--len);
+ continue;
+ }
+ len -= op - whave;
+ do {
+ *out++ = 0;
+ } while (--op > whave);
+ if (op == 0) {
+ from = out - dist;
+ do {
+ *out++ = *from++;
+ } while (--len);
+ continue;
+ }
+#endif
+ }
+ from = window;
+ if (wnext == 0) { /* very common case */
+ from += wsize - op;
+ if (op < len) { /* some from window */
+ len -= op;
+ do {
+ *out++ = *from++;
+ } while (--op);
+ from = out - dist; /* rest from output */
+ }
+ }
+ else if (wnext < op) { /* wrap around window */
+ from += wsize + wnext - op;
+ op -= wnext;
+ if (op < len) { /* some from end of window */
+ len -= op;
+ do {
+ *out++ = *from++;
+ } while (--op);
+ from = window;
+ if (wnext < len) { /* some from start of window */
+ op = wnext;
+ len -= op;
+ do {
+ *out++ = *from++;
+ } while (--op);
+ from = out - dist; /* rest from output */
+ }
+ }
+ }
+ else { /* contiguous in window */
+ from += wnext - op;
+ if (op < len) { /* some from window */
+ len -= op;
+ do {
+ *out++ = *from++;
+ } while (--op);
+ from = out - dist; /* rest from output */
+ }
+ }
+ while (len > 2) {
+ *out++ = *from++;
+ *out++ = *from++;
+ *out++ = *from++;
+ len -= 3;
+ }
+ if (len) {
+ *out++ = *from++;
+ if (len > 1)
+ *out++ = *from++;
+ }
+ }
+ else {
+ from = out - dist; /* copy direct from output */
+ do { /* minimum length is three */
+ *out++ = *from++;
+ *out++ = *from++;
+ *out++ = *from++;
+ len -= 3;
+ } while (len > 2);
+ if (len) {
+ *out++ = *from++;
+ if (len > 1)
+ *out++ = *from++;
+ }
+ }
+ }
+ else if ((op & 64) == 0) { /* 2nd level distance code */
+ here = dcode[here.val + (hold & ((1U << op) - 1))];
+ goto dodist;
+ }
+ else {
+ strm->msg = (char *)"invalid distance code";
+ state->mode = BAD;
+ break;
+ }
+ }
+ else if ((op & 64) == 0) { /* 2nd level length code */
+ here = lcode[here.val + (hold & ((1U << op) - 1))];
+ goto dolen;
+ }
+ else if (op & 32) { /* end-of-block */
+ Tracevv((stderr, "inflate: end of block\n"));
+ state->mode = TYPE;
+ break;
+ }
+ else {
+ strm->msg = (char *)"invalid literal/length code";
+ state->mode = BAD;
+ break;
+ }
+ } while (in < last && out < end);
+
+ /* return unused bytes (on entry, bits < 8, so in won't go too far back) */
+ len = bits >> 3;
+ in -= len;
+ bits -= len << 3;
+ hold &= (1U << bits) - 1;
+
+ /* update state and return */
+ strm->next_in = in;
+ strm->next_out = out;
+ strm->avail_in = (unsigned)(in < last ? 5 + (last - in) : 5 - (in - last));
+ strm->avail_out = (unsigned)(out < end ?
+ 257 + (end - out) : 257 - (out - end));
+ state->hold = hold;
+ state->bits = bits;
+ return;
+}
+
+/*
+ inflate_fast() speedups that turned out slower (on a PowerPC G3 750CXe):
+ - Using bit fields for code structure
+ - Different op definition to avoid & for extra bits (do & for table bits)
+ - Three separate decoding do-loops for direct, window, and wnext == 0
+ - Special case for distance > 1 copies to do overlapped load and store copy
+ - Explicit branch predictions (based on measured branch probabilities)
+ - Deferring match copy and interspersed it with decoding subsequent codes
+ - Swapping literal/length else
+ - Swapping window/direct else
+ - Larger unrolled copy loops (three is about right)
+ - Moving len -= 3 statement into middle of loop
+ */
+
+#endif /* !ASMINF */
diff --git a/src/gzip/inffast.h b/src/gzip/inffast.h
new file mode 100644
index 0000000..e5c1aa4
--- /dev/null
+++ b/src/gzip/inffast.h
@@ -0,0 +1,11 @@
+/* inffast.h -- header to use inffast.c
+ * Copyright (C) 1995-2003, 2010 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* WARNING: this file should *not* be used by applications. It is
+ part of the implementation of the compression library and is
+ subject to change. Applications should only use zlib.h.
+ */
+
+void ZLIB_INTERNAL inflate_fast OF((z_streamp strm, unsigned start));
diff --git a/src/gzip/inffixed.h b/src/gzip/inffixed.h
index 4d4760e..d628327 100644
--- a/src/gzip/inffixed.h
+++ b/src/gzip/inffixed.h
@@ -1,151 +1,94 @@
-/* inffixed.h -- table for decoding fixed codes
- * Generated automatically by the maketree.c program
- */
+ /* inffixed.h -- table for decoding fixed codes
+ * Generated automatically by makefixed().
+ */
-/* WARNING: this file should *not* be used by applications. It is
- part of the implementation of the compression library and is
- subject to change. Applications should only use zlib.h.
- */
+ /* WARNING: this file should *not* be used by applications.
+ It is part of the implementation of this library and is
+ subject to change. Applications should only use zlib.h.
+ */
-local const uInt fixed_bl = 9;
-local const uInt fixed_bd = 5;
-local const inflate_huft fixed_tl[] = {
- {{{96,7}},256}, {{{0,8}},80}, {{{0,8}},16}, {{{84,8}},115},
- {{{82,7}},31}, {{{0,8}},112}, {{{0,8}},48}, {{{0,9}},192},
- {{{80,7}},10}, {{{0,8}},96}, {{{0,8}},32}, {{{0,9}},160},
- {{{0,8}},0}, {{{0,8}},128}, {{{0,8}},64}, {{{0,9}},224},
- {{{80,7}},6}, {{{0,8}},88}, {{{0,8}},24}, {{{0,9}},144},
- {{{83,7}},59}, {{{0,8}},120}, {{{0,8}},56}, {{{0,9}},208},
- {{{81,7}},17}, {{{0,8}},104}, {{{0,8}},40}, {{{0,9}},176},
- {{{0,8}},8}, {{{0,8}},136}, {{{0,8}},72}, {{{0,9}},240},
- {{{80,7}},4}, {{{0,8}},84}, {{{0,8}},20}, {{{85,8}},227},
- {{{83,7}},43}, {{{0,8}},116}, {{{0,8}},52}, {{{0,9}},200},
- {{{81,7}},13}, {{{0,8}},100}, {{{0,8}},36}, {{{0,9}},168},
- {{{0,8}},4}, {{{0,8}},132}, {{{0,8}},68}, {{{0,9}},232},
- {{{80,7}},8}, {{{0,8}},92}, {{{0,8}},28}, {{{0,9}},152},
- {{{84,7}},83}, {{{0,8}},124}, {{{0,8}},60}, {{{0,9}},216},
- {{{82,7}},23}, {{{0,8}},108}, {{{0,8}},44}, {{{0,9}},184},
- {{{0,8}},12}, {{{0,8}},140}, {{{0,8}},76}, {{{0,9}},248},
- {{{80,7}},3}, {{{0,8}},82}, {{{0,8}},18}, {{{85,8}},163},
- {{{83,7}},35}, {{{0,8}},114}, {{{0,8}},50}, {{{0,9}},196},
- {{{81,7}},11}, {{{0,8}},98}, {{{0,8}},34}, {{{0,9}},164},
- {{{0,8}},2}, {{{0,8}},130}, {{{0,8}},66}, {{{0,9}},228},
- {{{80,7}},7}, {{{0,8}},90}, {{{0,8}},26}, {{{0,9}},148},
- {{{84,7}},67}, {{{0,8}},122}, {{{0,8}},58}, {{{0,9}},212},
- {{{82,7}},19}, {{{0,8}},106}, {{{0,8}},42}, {{{0,9}},180},
- {{{0,8}},10}, {{{0,8}},138}, {{{0,8}},74}, {{{0,9}},244},
- {{{80,7}},5}, {{{0,8}},86}, {{{0,8}},22}, {{{192,8}},0},
- {{{83,7}},51}, {{{0,8}},118}, {{{0,8}},54}, {{{0,9}},204},
- {{{81,7}},15}, {{{0,8}},102}, {{{0,8}},38}, {{{0,9}},172},
- {{{0,8}},6}, {{{0,8}},134}, {{{0,8}},70}, {{{0,9}},236},
- {{{80,7}},9}, {{{0,8}},94}, {{{0,8}},30}, {{{0,9}},156},
- {{{84,7}},99}, {{{0,8}},126}, {{{0,8}},62}, {{{0,9}},220},
- {{{82,7}},27}, {{{0,8}},110}, {{{0,8}},46}, {{{0,9}},188},
- {{{0,8}},14}, {{{0,8}},142}, {{{0,8}},78}, {{{0,9}},252},
- {{{96,7}},256}, {{{0,8}},81}, {{{0,8}},17}, {{{85,8}},131},
- {{{82,7}},31}, {{{0,8}},113}, {{{0,8}},49}, {{{0,9}},194},
- {{{80,7}},10}, {{{0,8}},97}, {{{0,8}},33}, {{{0,9}},162},
- {{{0,8}},1}, {{{0,8}},129}, {{{0,8}},65}, {{{0,9}},226},
- {{{80,7}},6}, {{{0,8}},89}, {{{0,8}},25}, {{{0,9}},146},
- {{{83,7}},59}, {{{0,8}},121}, {{{0,8}},57}, {{{0,9}},210},
- {{{81,7}},17}, {{{0,8}},105}, {{{0,8}},41}, {{{0,9}},178},
- {{{0,8}},9}, {{{0,8}},137}, {{{0,8}},73}, {{{0,9}},242},
- {{{80,7}},4}, {{{0,8}},85}, {{{0,8}},21}, {{{80,8}},258},
- {{{83,7}},43}, {{{0,8}},117}, {{{0,8}},53}, {{{0,9}},202},
- {{{81,7}},13}, {{{0,8}},101}, {{{0,8}},37}, {{{0,9}},170},
- {{{0,8}},5}, {{{0,8}},133}, {{{0,8}},69}, {{{0,9}},234},
- {{{80,7}},8}, {{{0,8}},93}, {{{0,8}},29}, {{{0,9}},154},
- {{{84,7}},83}, {{{0,8}},125}, {{{0,8}},61}, {{{0,9}},218},
- {{{82,7}},23}, {{{0,8}},109}, {{{0,8}},45}, {{{0,9}},186},
- {{{0,8}},13}, {{{0,8}},141}, {{{0,8}},77}, {{{0,9}},250},
- {{{80,7}},3}, {{{0,8}},83}, {{{0,8}},19}, {{{85,8}},195},
- {{{83,7}},35}, {{{0,8}},115}, {{{0,8}},51}, {{{0,9}},198},
- {{{81,7}},11}, {{{0,8}},99}, {{{0,8}},35}, {{{0,9}},166},
- {{{0,8}},3}, {{{0,8}},131}, {{{0,8}},67}, {{{0,9}},230},
- {{{80,7}},7}, {{{0,8}},91}, {{{0,8}},27}, {{{0,9}},150},
- {{{84,7}},67}, {{{0,8}},123}, {{{0,8}},59}, {{{0,9}},214},
- {{{82,7}},19}, {{{0,8}},107}, {{{0,8}},43}, {{{0,9}},182},
- {{{0,8}},11}, {{{0,8}},139}, {{{0,8}},75}, {{{0,9}},246},
- {{{80,7}},5}, {{{0,8}},87}, {{{0,8}},23}, {{{192,8}},0},
- {{{83,7}},51}, {{{0,8}},119}, {{{0,8}},55}, {{{0,9}},206},
- {{{81,7}},15}, {{{0,8}},103}, {{{0,8}},39}, {{{0,9}},174},
- {{{0,8}},7}, {{{0,8}},135}, {{{0,8}},71}, {{{0,9}},238},
- {{{80,7}},9}, {{{0,8}},95}, {{{0,8}},31}, {{{0,9}},158},
- {{{84,7}},99}, {{{0,8}},127}, {{{0,8}},63}, {{{0,9}},222},
- {{{82,7}},27}, {{{0,8}},111}, {{{0,8}},47}, {{{0,9}},190},
- {{{0,8}},15}, {{{0,8}},143}, {{{0,8}},79}, {{{0,9}},254},
- {{{96,7}},256}, {{{0,8}},80}, {{{0,8}},16}, {{{84,8}},115},
- {{{82,7}},31}, {{{0,8}},112}, {{{0,8}},48}, {{{0,9}},193},
- {{{80,7}},10}, {{{0,8}},96}, {{{0,8}},32}, {{{0,9}},161},
- {{{0,8}},0}, {{{0,8}},128}, {{{0,8}},64}, {{{0,9}},225},
- {{{80,7}},6}, {{{0,8}},88}, {{{0,8}},24}, {{{0,9}},145},
- {{{83,7}},59}, {{{0,8}},120}, {{{0,8}},56}, {{{0,9}},209},
- {{{81,7}},17}, {{{0,8}},104}, {{{0,8}},40}, {{{0,9}},177},
- {{{0,8}},8}, {{{0,8}},136}, {{{0,8}},72}, {{{0,9}},241},
- {{{80,7}},4}, {{{0,8}},84}, {{{0,8}},20}, {{{85,8}},227},
- {{{83,7}},43}, {{{0,8}},116}, {{{0,8}},52}, {{{0,9}},201},
- {{{81,7}},13}, {{{0,8}},100}, {{{0,8}},36}, {{{0,9}},169},
- {{{0,8}},4}, {{{0,8}},132}, {{{0,8}},68}, {{{0,9}},233},
- {{{80,7}},8}, {{{0,8}},92}, {{{0,8}},28}, {{{0,9}},153},
- {{{84,7}},83}, {{{0,8}},124}, {{{0,8}},60}, {{{0,9}},217},
- {{{82,7}},23}, {{{0,8}},108}, {{{0,8}},44}, {{{0,9}},185},
- {{{0,8}},12}, {{{0,8}},140}, {{{0,8}},76}, {{{0,9}},249},
- {{{80,7}},3}, {{{0,8}},82}, {{{0,8}},18}, {{{85,8}},163},
- {{{83,7}},35}, {{{0,8}},114}, {{{0,8}},50}, {{{0,9}},197},
- {{{81,7}},11}, {{{0,8}},98}, {{{0,8}},34}, {{{0,9}},165},
- {{{0,8}},2}, {{{0,8}},130}, {{{0,8}},66}, {{{0,9}},229},
- {{{80,7}},7}, {{{0,8}},90}, {{{0,8}},26}, {{{0,9}},149},
- {{{84,7}},67}, {{{0,8}},122}, {{{0,8}},58}, {{{0,9}},213},
- {{{82,7}},19}, {{{0,8}},106}, {{{0,8}},42}, {{{0,9}},181},
- {{{0,8}},10}, {{{0,8}},138}, {{{0,8}},74}, {{{0,9}},245},
- {{{80,7}},5}, {{{0,8}},86}, {{{0,8}},22}, {{{192,8}},0},
- {{{83,7}},51}, {{{0,8}},118}, {{{0,8}},54}, {{{0,9}},205},
- {{{81,7}},15}, {{{0,8}},102}, {{{0,8}},38}, {{{0,9}},173},
- {{{0,8}},6}, {{{0,8}},134}, {{{0,8}},70}, {{{0,9}},237},
- {{{80,7}},9}, {{{0,8}},94}, {{{0,8}},30}, {{{0,9}},157},
- {{{84,7}},99}, {{{0,8}},126}, {{{0,8}},62}, {{{0,9}},221},
- {{{82,7}},27}, {{{0,8}},110}, {{{0,8}},46}, {{{0,9}},189},
- {{{0,8}},14}, {{{0,8}},142}, {{{0,8}},78}, {{{0,9}},253},
- {{{96,7}},256}, {{{0,8}},81}, {{{0,8}},17}, {{{85,8}},131},
- {{{82,7}},31}, {{{0,8}},113}, {{{0,8}},49}, {{{0,9}},195},
- {{{80,7}},10}, {{{0,8}},97}, {{{0,8}},33}, {{{0,9}},163},
- {{{0,8}},1}, {{{0,8}},129}, {{{0,8}},65}, {{{0,9}},227},
- {{{80,7}},6}, {{{0,8}},89}, {{{0,8}},25}, {{{0,9}},147},
- {{{83,7}},59}, {{{0,8}},121}, {{{0,8}},57}, {{{0,9}},211},
- {{{81,7}},17}, {{{0,8}},105}, {{{0,8}},41}, {{{0,9}},179},
- {{{0,8}},9}, {{{0,8}},137}, {{{0,8}},73}, {{{0,9}},243},
- {{{80,7}},4}, {{{0,8}},85}, {{{0,8}},21}, {{{80,8}},258},
- {{{83,7}},43}, {{{0,8}},117}, {{{0,8}},53}, {{{0,9}},203},
- {{{81,7}},13}, {{{0,8}},101}, {{{0,8}},37}, {{{0,9}},171},
- {{{0,8}},5}, {{{0,8}},133}, {{{0,8}},69}, {{{0,9}},235},
- {{{80,7}},8}, {{{0,8}},93}, {{{0,8}},29}, {{{0,9}},155},
- {{{84,7}},83}, {{{0,8}},125}, {{{0,8}},61}, {{{0,9}},219},
- {{{82,7}},23}, {{{0,8}},109}, {{{0,8}},45}, {{{0,9}},187},
- {{{0,8}},13}, {{{0,8}},141}, {{{0,8}},77}, {{{0,9}},251},
- {{{80,7}},3}, {{{0,8}},83}, {{{0,8}},19}, {{{85,8}},195},
- {{{83,7}},35}, {{{0,8}},115}, {{{0,8}},51}, {{{0,9}},199},
- {{{81,7}},11}, {{{0,8}},99}, {{{0,8}},35}, {{{0,9}},167},
- {{{0,8}},3}, {{{0,8}},131}, {{{0,8}},67}, {{{0,9}},231},
- {{{80,7}},7}, {{{0,8}},91}, {{{0,8}},27}, {{{0,9}},151},
- {{{84,7}},67}, {{{0,8}},123}, {{{0,8}},59}, {{{0,9}},215},
- {{{82,7}},19}, {{{0,8}},107}, {{{0,8}},43}, {{{0,9}},183},
- {{{0,8}},11}, {{{0,8}},139}, {{{0,8}},75}, {{{0,9}},247},
- {{{80,7}},5}, {{{0,8}},87}, {{{0,8}},23}, {{{192,8}},0},
- {{{83,7}},51}, {{{0,8}},119}, {{{0,8}},55}, {{{0,9}},207},
- {{{81,7}},15}, {{{0,8}},103}, {{{0,8}},39}, {{{0,9}},175},
- {{{0,8}},7}, {{{0,8}},135}, {{{0,8}},71}, {{{0,9}},239},
- {{{80,7}},9}, {{{0,8}},95}, {{{0,8}},31}, {{{0,9}},159},
- {{{84,7}},99}, {{{0,8}},127}, {{{0,8}},63}, {{{0,9}},223},
- {{{82,7}},27}, {{{0,8}},111}, {{{0,8}},47}, {{{0,9}},191},
- {{{0,8}},15}, {{{0,8}},143}, {{{0,8}},79}, {{{0,9}},255}
- };
-local const inflate_huft fixed_td[] = {
- {{{80,5}},1}, {{{87,5}},257}, {{{83,5}},17}, {{{91,5}},4097},
- {{{81,5}},5}, {{{89,5}},1025}, {{{85,5}},65}, {{{93,5}},16385},
- {{{80,5}},3}, {{{88,5}},513}, {{{84,5}},33}, {{{92,5}},8193},
- {{{82,5}},9}, {{{90,5}},2049}, {{{86,5}},129}, {{{192,5}},24577},
- {{{80,5}},2}, {{{87,5}},385}, {{{83,5}},25}, {{{91,5}},6145},
- {{{81,5}},7}, {{{89,5}},1537}, {{{85,5}},97}, {{{93,5}},24577},
- {{{80,5}},4}, {{{88,5}},769}, {{{84,5}},49}, {{{92,5}},12289},
- {{{82,5}},13}, {{{90,5}},3073}, {{{86,5}},193}, {{{192,5}},24577}
- };
+ static const code lenfix[512] = {
+ {96,7,0},{0,8,80},{0,8,16},{20,8,115},{18,7,31},{0,8,112},{0,8,48},
+ {0,9,192},{16,7,10},{0,8,96},{0,8,32},{0,9,160},{0,8,0},{0,8,128},
+ {0,8,64},{0,9,224},{16,7,6},{0,8,88},{0,8,24},{0,9,144},{19,7,59},
+ {0,8,120},{0,8,56},{0,9,208},{17,7,17},{0,8,104},{0,8,40},{0,9,176},
+ {0,8,8},{0,8,136},{0,8,72},{0,9,240},{16,7,4},{0,8,84},{0,8,20},
+ {21,8,227},{19,7,43},{0,8,116},{0,8,52},{0,9,200},{17,7,13},{0,8,100},
+ {0,8,36},{0,9,168},{0,8,4},{0,8,132},{0,8,68},{0,9,232},{16,7,8},
+ {0,8,92},{0,8,28},{0,9,152},{20,7,83},{0,8,124},{0,8,60},{0,9,216},
+ {18,7,23},{0,8,108},{0,8,44},{0,9,184},{0,8,12},{0,8,140},{0,8,76},
+ {0,9,248},{16,7,3},{0,8,82},{0,8,18},{21,8,163},{19,7,35},{0,8,114},
+ {0,8,50},{0,9,196},{17,7,11},{0,8,98},{0,8,34},{0,9,164},{0,8,2},
+ {0,8,130},{0,8,66},{0,9,228},{16,7,7},{0,8,90},{0,8,26},{0,9,148},
+ {20,7,67},{0,8,122},{0,8,58},{0,9,212},{18,7,19},{0,8,106},{0,8,42},
+ {0,9,180},{0,8,10},{0,8,138},{0,8,74},{0,9,244},{16,7,5},{0,8,86},
+ {0,8,22},{64,8,0},{19,7,51},{0,8,118},{0,8,54},{0,9,204},{17,7,15},
+ {0,8,102},{0,8,38},{0,9,172},{0,8,6},{0,8,134},{0,8,70},{0,9,236},
+ {16,7,9},{0,8,94},{0,8,30},{0,9,156},{20,7,99},{0,8,126},{0,8,62},
+ {0,9,220},{18,7,27},{0,8,110},{0,8,46},{0,9,188},{0,8,14},{0,8,142},
+ {0,8,78},{0,9,252},{96,7,0},{0,8,81},{0,8,17},{21,8,131},{18,7,31},
+ {0,8,113},{0,8,49},{0,9,194},{16,7,10},{0,8,97},{0,8,33},{0,9,162},
+ {0,8,1},{0,8,129},{0,8,65},{0,9,226},{16,7,6},{0,8,89},{0,8,25},
+ {0,9,146},{19,7,59},{0,8,121},{0,8,57},{0,9,210},{17,7,17},{0,8,105},
+ {0,8,41},{0,9,178},{0,8,9},{0,8,137},{0,8,73},{0,9,242},{16,7,4},
+ {0,8,85},{0,8,21},{16,8,258},{19,7,43},{0,8,117},{0,8,53},{0,9,202},
+ {17,7,13},{0,8,101},{0,8,37},{0,9,170},{0,8,5},{0,8,133},{0,8,69},
+ {0,9,234},{16,7,8},{0,8,93},{0,8,29},{0,9,154},{20,7,83},{0,8,125},
+ {0,8,61},{0,9,218},{18,7,23},{0,8,109},{0,8,45},{0,9,186},{0,8,13},
+ {0,8,141},{0,8,77},{0,9,250},{16,7,3},{0,8,83},{0,8,19},{21,8,195},
+ {19,7,35},{0,8,115},{0,8,51},{0,9,198},{17,7,11},{0,8,99},{0,8,35},
+ {0,9,166},{0,8,3},{0,8,131},{0,8,67},{0,9,230},{16,7,7},{0,8,91},
+ {0,8,27},{0,9,150},{20,7,67},{0,8,123},{0,8,59},{0,9,214},{18,7,19},
+ {0,8,107},{0,8,43},{0,9,182},{0,8,11},{0,8,139},{0,8,75},{0,9,246},
+ {16,7,5},{0,8,87},{0,8,23},{64,8,0},{19,7,51},{0,8,119},{0,8,55},
+ {0,9,206},{17,7,15},{0,8,103},{0,8,39},{0,9,174},{0,8,7},{0,8,135},
+ {0,8,71},{0,9,238},{16,7,9},{0,8,95},{0,8,31},{0,9,158},{20,7,99},
+ {0,8,127},{0,8,63},{0,9,222},{18,7,27},{0,8,111},{0,8,47},{0,9,190},
+ {0,8,15},{0,8,143},{0,8,79},{0,9,254},{96,7,0},{0,8,80},{0,8,16},
+ {20,8,115},{18,7,31},{0,8,112},{0,8,48},{0,9,193},{16,7,10},{0,8,96},
+ {0,8,32},{0,9,161},{0,8,0},{0,8,128},{0,8,64},{0,9,225},{16,7,6},
+ {0,8,88},{0,8,24},{0,9,145},{19,7,59},{0,8,120},{0,8,56},{0,9,209},
+ {17,7,17},{0,8,104},{0,8,40},{0,9,177},{0,8,8},{0,8,136},{0,8,72},
+ {0,9,241},{16,7,4},{0,8,84},{0,8,20},{21,8,227},{19,7,43},{0,8,116},
+ {0,8,52},{0,9,201},{17,7,13},{0,8,100},{0,8,36},{0,9,169},{0,8,4},
+ {0,8,132},{0,8,68},{0,9,233},{16,7,8},{0,8,92},{0,8,28},{0,9,153},
+ {20,7,83},{0,8,124},{0,8,60},{0,9,217},{18,7,23},{0,8,108},{0,8,44},
+ {0,9,185},{0,8,12},{0,8,140},{0,8,76},{0,9,249},{16,7,3},{0,8,82},
+ {0,8,18},{21,8,163},{19,7,35},{0,8,114},{0,8,50},{0,9,197},{17,7,11},
+ {0,8,98},{0,8,34},{0,9,165},{0,8,2},{0,8,130},{0,8,66},{0,9,229},
+ {16,7,7},{0,8,90},{0,8,26},{0,9,149},{20,7,67},{0,8,122},{0,8,58},
+ {0,9,213},{18,7,19},{0,8,106},{0,8,42},{0,9,181},{0,8,10},{0,8,138},
+ {0,8,74},{0,9,245},{16,7,5},{0,8,86},{0,8,22},{64,8,0},{19,7,51},
+ {0,8,118},{0,8,54},{0,9,205},{17,7,15},{0,8,102},{0,8,38},{0,9,173},
+ {0,8,6},{0,8,134},{0,8,70},{0,9,237},{16,7,9},{0,8,94},{0,8,30},
+ {0,9,157},{20,7,99},{0,8,126},{0,8,62},{0,9,221},{18,7,27},{0,8,110},
+ {0,8,46},{0,9,189},{0,8,14},{0,8,142},{0,8,78},{0,9,253},{96,7,0},
+ {0,8,81},{0,8,17},{21,8,131},{18,7,31},{0,8,113},{0,8,49},{0,9,195},
+ {16,7,10},{0,8,97},{0,8,33},{0,9,163},{0,8,1},{0,8,129},{0,8,65},
+ {0,9,227},{16,7,6},{0,8,89},{0,8,25},{0,9,147},{19,7,59},{0,8,121},
+ {0,8,57},{0,9,211},{17,7,17},{0,8,105},{0,8,41},{0,9,179},{0,8,9},
+ {0,8,137},{0,8,73},{0,9,243},{16,7,4},{0,8,85},{0,8,21},{16,8,258},
+ {19,7,43},{0,8,117},{0,8,53},{0,9,203},{17,7,13},{0,8,101},{0,8,37},
+ {0,9,171},{0,8,5},{0,8,133},{0,8,69},{0,9,235},{16,7,8},{0,8,93},
+ {0,8,29},{0,9,155},{20,7,83},{0,8,125},{0,8,61},{0,9,219},{18,7,23},
+ {0,8,109},{0,8,45},{0,9,187},{0,8,13},{0,8,141},{0,8,77},{0,9,251},
+ {16,7,3},{0,8,83},{0,8,19},{21,8,195},{19,7,35},{0,8,115},{0,8,51},
+ {0,9,199},{17,7,11},{0,8,99},{0,8,35},{0,9,167},{0,8,3},{0,8,131},
+ {0,8,67},{0,9,231},{16,7,7},{0,8,91},{0,8,27},{0,9,151},{20,7,67},
+ {0,8,123},{0,8,59},{0,9,215},{18,7,19},{0,8,107},{0,8,43},{0,9,183},
+ {0,8,11},{0,8,139},{0,8,75},{0,9,247},{16,7,5},{0,8,87},{0,8,23},
+ {64,8,0},{19,7,51},{0,8,119},{0,8,55},{0,9,207},{17,7,15},{0,8,103},
+ {0,8,39},{0,9,175},{0,8,7},{0,8,135},{0,8,71},{0,9,239},{16,7,9},
+ {0,8,95},{0,8,31},{0,9,159},{20,7,99},{0,8,127},{0,8,63},{0,9,223},
+ {18,7,27},{0,8,111},{0,8,47},{0,9,191},{0,8,15},{0,8,143},{0,8,79},
+ {0,9,255}
+ };
+
+ static const code distfix[32] = {
+ {16,5,1},{23,5,257},{19,5,17},{27,5,4097},{17,5,5},{25,5,1025},
+ {21,5,65},{29,5,16385},{16,5,3},{24,5,513},{20,5,33},{28,5,8193},
+ {18,5,9},{26,5,2049},{22,5,129},{64,5,0},{16,5,2},{23,5,385},
+ {19,5,25},{27,5,6145},{17,5,7},{25,5,1537},{21,5,97},{29,5,24577},
+ {16,5,4},{24,5,769},{20,5,49},{28,5,12289},{18,5,13},{26,5,3073},
+ {22,5,193},{64,5,0}
+ };
diff --git a/src/gzip/inflate.c b/src/gzip/inflate.c
index 95e2653..7387e6f 100644
--- a/src/gzip/inflate.c
+++ b/src/gzip/inflate.c
@@ -1,283 +1,1579 @@
-/* inflate.c -- zlib interface to inflate modules
- * Copyright (C) 1995-2002 Mark Adler
+/* inflate.c -- zlib decompression
+ * Copyright (C) 1995-2016 Mark Adler
* For conditions of distribution and use, see copyright notice in zlib.h
*/
+/*
+ * Change history:
+ *
+ * 1.2.beta0 24 Nov 2002
+ * - First version -- complete rewrite of inflate to simplify code, avoid
+ * creation of window when not needed, minimize use of window when it is
+ * needed, make inffast.c even faster, implement gzip decoding, and to
+ * improve code readability and style over the previous zlib inflate code
+ *
+ * 1.2.beta1 25 Nov 2002
+ * - Use pointers for available input and output checking in inffast.c
+ * - Remove input and output counters in inffast.c
+ * - Change inffast.c entry and loop from avail_in >= 7 to >= 6
+ * - Remove unnecessary second byte pull from length extra in inffast.c
+ * - Unroll direct copy to three copies per loop in inffast.c
+ *
+ * 1.2.beta2 4 Dec 2002
+ * - Change external routine names to reduce potential conflicts
+ * - Correct filename to inffixed.h for fixed tables in inflate.c
+ * - Make hbuf[] unsigned char to match parameter type in inflate.c
+ * - Change strm->next_out[-state->offset] to *(strm->next_out - state->offset)
+ * to avoid negation problem on Alphas (64 bit) in inflate.c
+ *
+ * 1.2.beta3 22 Dec 2002
+ * - Add comments on state->bits assertion in inffast.c
+ * - Add comments on op field in inftrees.h
+ * - Fix bug in reuse of allocated window after inflateReset()
+ * - Remove bit fields--back to byte structure for speed
+ * - Remove distance extra == 0 check in inflate_fast()--only helps for lengths
+ * - Change post-increments to pre-increments in inflate_fast(), PPC biased?
+ * - Add compile time option, POSTINC, to use post-increments instead (Intel?)
+ * - Make MATCH copy in inflate() much faster for when inflate_fast() not used
+ * - Use local copies of stream next and avail values, as well as local bit
+ * buffer and bit count in inflate()--for speed when inflate_fast() not used
+ *
+ * 1.2.beta4 1 Jan 2003
+ * - Split ptr - 257 statements in inflate_table() to avoid compiler warnings
+ * - Move a comment on output buffer sizes from inffast.c to inflate.c
+ * - Add comments in inffast.c to introduce the inflate_fast() routine
+ * - Rearrange window copies in inflate_fast() for speed and simplification
+ * - Unroll last copy for window match in inflate_fast()
+ * - Use local copies of window variables in inflate_fast() for speed
+ * - Pull out common wnext == 0 case for speed in inflate_fast()
+ * - Make op and len in inflate_fast() unsigned for consistency
+ * - Add FAR to lcode and dcode declarations in inflate_fast()
+ * - Simplified bad distance check in inflate_fast()
+ * - Added inflateBackInit(), inflateBack(), and inflateBackEnd() in new
+ * source file infback.c to provide a call-back interface to inflate for
+ * programs like gzip and unzip -- uses window as output buffer to avoid
+ * window copying
+ *
+ * 1.2.beta5 1 Jan 2003
+ * - Improved inflateBack() interface to allow the caller to provide initial
+ * input in strm.
+ * - Fixed stored blocks bug in inflateBack()
+ *
+ * 1.2.beta6 4 Jan 2003
+ * - Added comments in inffast.c on effectiveness of POSTINC
+ * - Typecasting all around to reduce compiler warnings
+ * - Changed loops from while (1) or do {} while (1) to for (;;), again to
+ * make compilers happy
+ * - Changed type of window in inflateBackInit() to unsigned char *
+ *
+ * 1.2.beta7 27 Jan 2003
+ * - Changed many types to unsigned or unsigned short to avoid warnings
+ * - Added inflateCopy() function
+ *
+ * 1.2.0 9 Mar 2003
+ * - Changed inflateBack() interface to provide separate opaque descriptors
+ * for the in() and out() functions
+ * - Changed inflateBack() argument and in_func typedef to swap the length
+ * and buffer address return values for the input function
+ * - Check next_in and next_out for Z_NULL on entry to inflate()
+ *
+ * The history for versions after 1.2.0 are in ChangeLog in zlib distribution.
+ */
+
#include "zutil.h"
-#include "infblock.h"
-
-#define DONE INFLATE_DONE
-#define BAD INFLATE_BAD
-
-typedef enum {
- METHOD, /* waiting for method byte */
- FLAG, /* waiting for flag byte */
- DICT4, /* four dictionary check bytes to go */
- DICT3, /* three dictionary check bytes to go */
- DICT2, /* two dictionary check bytes to go */
- DICT1, /* one dictionary check byte to go */
- DICT0, /* waiting for inflateSetDictionary */
- BLOCKS, /* decompressing blocks */
- CHECK4, /* four check bytes to go */
- CHECK3, /* three check bytes to go */
- CHECK2, /* two check bytes to go */
- CHECK1, /* one check byte to go */
- DONE, /* finished check, done */
- BAD} /* got an error--stay here */
-inflate_mode;
-
-/* inflate private state */
-struct internal_state {
-
- /* mode */
- inflate_mode mode; /* current inflate mode */
-
- /* mode dependent information */
- union {
- uInt method; /* if FLAGS, method byte */
- struct {
- uLong was; /* computed check value */
- uLong need; /* stream check value */
- } check; /* if CHECK, check values to compare */
- uInt marker; /* if BAD, inflateSync's marker bytes count */
- } sub; /* submode */
-
- /* mode independent information */
- int nowrap; /* flag for no wrapper */
- uInt wbits; /* log2(window size) (8..15, defaults to 15) */
- inflate_blocks_statef
- *blocks; /* current inflate_blocks state */
-
-};
-
-
-ZEXPORT(int) inflateReset( /* z) */
-z_streamp z )
+#include "inftrees.h"
+#include "inflate.h"
+#include "inffast.h"
+
+#ifdef MAKEFIXED
+# ifndef BUILDFIXED
+# define BUILDFIXED
+# endif
+#endif
+
+/* function prototypes */
+local int inflateStateCheck OF((z_streamp strm));
+local void fixedtables OF((struct inflate_state FAR *state));
+local int updatewindow OF((z_streamp strm, const unsigned char FAR *end,
+ unsigned copy));
+#ifdef BUILDFIXED
+ void makefixed OF((void));
+#endif
+#ifndef Z_FREETYPE
+local unsigned syncsearch OF((unsigned FAR *have, const unsigned char FAR *buf,
+ unsigned len));
+#endif
+
+local int inflateStateCheck(
+ z_streamp strm)
{
- if (z == Z_NULL || z->state == Z_NULL)
- return Z_STREAM_ERROR;
- z->total_in = z->total_out = 0;
- z->msg = Z_NULL;
- z->state->mode = z->state->nowrap ? BLOCKS : METHOD;
- inflate_blocks_reset(z->state->blocks, z, Z_NULL);
- Tracev((stderr, "inflate: reset\n"));
- return Z_OK;
+ struct inflate_state FAR *state;
+ if (strm == Z_NULL ||
+ strm->zalloc == (alloc_func)0 || strm->zfree == (free_func)0)
+ return 1;
+ state = (struct inflate_state FAR *)strm->state;
+ if (state == Z_NULL || state->strm != strm ||
+ state->mode < HEAD || state->mode > SYNC)
+ return 1;
+ return 0;
}
+int ZEXPORT inflateResetKeep(
+ z_streamp strm)
+{
+ struct inflate_state FAR *state;
+
+ if (inflateStateCheck(strm)) return Z_STREAM_ERROR;
+ state = (struct inflate_state FAR *)strm->state;
+ strm->total_in = strm->total_out = state->total = 0;
+ strm->msg = Z_NULL;
+ if (state->wrap) /* to support ill-conceived Java test suite */
+ strm->adler = state->wrap & 1;
+ state->mode = HEAD;
+ state->last = 0;
+ state->havedict = 0;
+ state->dmax = 32768U;
+ state->head = Z_NULL;
+ state->hold = 0;
+ state->bits = 0;
+ state->lencode = state->distcode = state->next = state->codes;
+ state->sane = 1;
+ state->back = -1;
+ Tracev((stderr, "inflate: reset\n"));
+ return Z_OK;
+}
-ZEXPORT(int) inflateEnd( /* z) */
-z_streamp z )
+int ZEXPORT inflateReset(
+ z_streamp strm)
{
- if (z == Z_NULL || z->state == Z_NULL || z->zfree == Z_NULL)
- return Z_STREAM_ERROR;
- if (z->state->blocks != Z_NULL)
- inflate_blocks_free(z->state->blocks, z);
- ZFREE(z, z->state);
- z->state = Z_NULL;
- Tracev((stderr, "inflate: end\n"));
- return Z_OK;
+ struct inflate_state FAR *state;
+
+ if (inflateStateCheck(strm)) return Z_STREAM_ERROR;
+ state = (struct inflate_state FAR *)strm->state;
+ state->wsize = 0;
+ state->whave = 0;
+ state->wnext = 0;
+ return inflateResetKeep(strm);
}
+int ZEXPORT inflateReset2(
+ z_streamp strm,
+ int windowBits)
+{
+ int wrap;
+ struct inflate_state FAR *state;
+
+ /* get the state */
+ if (inflateStateCheck(strm)) return Z_STREAM_ERROR;
+ state = (struct inflate_state FAR *)strm->state;
+
+ /* extract wrap request from windowBits parameter */
+ if (windowBits < 0) {
+ wrap = 0;
+ windowBits = -windowBits;
+ }
+ else {
+ wrap = (windowBits >> 4) + 5;
+#ifdef GUNZIP
+ if (windowBits < 48)
+ windowBits &= 15;
+#endif
+ }
+
+ /* set number of window bits, free window if different */
+ if (windowBits && (windowBits < 8 || windowBits > 15))
+ return Z_STREAM_ERROR;
+ if (state->window != Z_NULL && state->wbits != (unsigned)windowBits) {
+ ZFREE(strm, state->window);
+ state->window = Z_NULL;
+ }
+
+ /* update state and reset the rest of it */
+ state->wrap = wrap;
+ state->wbits = (unsigned)windowBits;
+ return inflateReset(strm);
+}
-ZEXPORT(int) inflateInit2_( /* z, w, version, stream_size) */
-z_streamp z,
-int w,
-const char *version,
-int stream_size )
+int ZEXPORT inflateInit2_(
+ z_streamp strm,
+ int windowBits,
+ const char *version,
+ int stream_size)
{
- if (version == Z_NULL || version[0] != ZLIB_VERSION[0] ||
- stream_size != sizeof(z_stream))
- return Z_VERSION_ERROR;
-
- /* initialize state */
- if (z == Z_NULL)
- return Z_STREAM_ERROR;
- z->msg = Z_NULL;
- if (z->zalloc == Z_NULL)
- {
- z->zalloc = zcalloc;
- z->opaque = (voidpf)0;
- }
- if (z->zfree == Z_NULL) z->zfree = zcfree;
- if ((z->state = (struct internal_state FAR *)
- ZALLOC(z,1,sizeof(struct internal_state))) == Z_NULL)
- return Z_MEM_ERROR;
- z->state->blocks = Z_NULL;
-
- /* handle undocumented nowrap option (no zlib header or check) */
- z->state->nowrap = 0;
- if (w < 0)
- {
- w = - w;
- z->state->nowrap = 1;
- }
-
- /* set window size */
- if (w < 8 || w > 15)
- {
- inflateEnd(z);
- return Z_STREAM_ERROR;
- }
- z->state->wbits = (uInt)w;
-
- /* create inflate_blocks state */
- if ((z->state->blocks =
- inflate_blocks_new(z, z->state->nowrap ? Z_NULL : adler32, (uInt)1 << w))
- == Z_NULL)
- {
- inflateEnd(z);
- return Z_MEM_ERROR;
- }
- Tracev((stderr, "inflate: allocated\n"));
-
- /* reset state */
- inflateReset(z);
- return Z_OK;
+ int ret;
+ struct inflate_state FAR *state;
+
+ if (version == Z_NULL || version[0] != ZLIB_VERSION[0] ||
+ stream_size != (int)(sizeof(z_stream)))
+ return Z_VERSION_ERROR;
+ if (strm == Z_NULL) return Z_STREAM_ERROR;
+ strm->msg = Z_NULL; /* in case we return an error */
+ if (strm->zalloc == (alloc_func)0) {
+#ifdef Z_SOLO
+ return Z_STREAM_ERROR;
+#else
+ strm->zalloc = zcalloc;
+ strm->opaque = (voidpf)0;
+#endif
+ }
+ if (strm->zfree == (free_func)0)
+#ifdef Z_SOLO
+ return Z_STREAM_ERROR;
+#else
+ strm->zfree = zcfree;
+#endif
+ state = (struct inflate_state FAR *)
+ ZALLOC(strm, 1, sizeof(struct inflate_state));
+ if (state == Z_NULL) return Z_MEM_ERROR;
+ Tracev((stderr, "inflate: allocated\n"));
+ strm->state = (struct internal_state FAR *)state;
+ state->strm = strm;
+ state->window = Z_NULL;
+ state->mode = HEAD; /* to pass state test in inflateReset2() */
+ ret = inflateReset2(strm, windowBits);
+ if (ret != Z_OK) {
+ ZFREE(strm, state);
+ strm->state = Z_NULL;
+ }
+ return ret;
}
+int ZEXPORT inflateInit_(
+ z_streamp strm,
+ const char *version,
+ int stream_size)
+{
+ return inflateInit2_(strm, DEF_WBITS, version, stream_size);
+}
+#ifndef Z_FREETYPE
-#undef NEEDBYTE
-#define NEEDBYTE {if(z->avail_in==0)return r;r=f;}
+int ZEXPORT inflatePrime(
+ z_streamp strm,
+ int bits,
+ int value)
+{
+ struct inflate_state FAR *state;
-#undef NEXTBYTE
-#define NEXTBYTE (z->avail_in--,z->total_in++,*z->next_in++)
+ if (inflateStateCheck(strm)) return Z_STREAM_ERROR;
+ state = (struct inflate_state FAR *)strm->state;
+ if (bits < 0) {
+ state->hold = 0;
+ state->bits = 0;
+ return Z_OK;
+ }
+ if (bits > 16 || state->bits + (uInt)bits > 32) return Z_STREAM_ERROR;
+ value &= (1L << bits) - 1;
+ state->hold += (unsigned)value << state->bits;
+ state->bits += (uInt)bits;
+ return Z_OK;
+}
+#endif /* Z_FREETYPE */
-ZEXPORT(int) inflate( /* z, f) */
-z_streamp z,
-int f )
+/*
+ Return state with length and distance decoding tables and index sizes set to
+ fixed code decoding. Normally this returns fixed tables from inffixed.h.
+ If BUILDFIXED is defined, then instead this routine builds the tables the
+ first time it's called, and returns those tables the first time and
+ thereafter. This reduces the size of the code by about 2K bytes, in
+ exchange for a little execution time. However, BUILDFIXED should not be
+ used for threaded applications, since the rewriting of the tables and virgin
+ may not be thread-safe.
+ */
+local void fixedtables(
+ struct inflate_state FAR *state)
{
- int r;
- uInt b;
-
- if (z == Z_NULL || z->state == Z_NULL || z->next_in == Z_NULL)
- return Z_STREAM_ERROR;
- f = f == Z_FINISH ? Z_BUF_ERROR : Z_OK;
- r = Z_BUF_ERROR;
- while (1) switch (z->state->mode)
- {
- case METHOD:
- NEEDBYTE
- if (((z->state->sub.method = NEXTBYTE) & 0xf) != Z_DEFLATED)
- {
- z->state->mode = BAD;
- z->msg = (char*)"unknown compression method";
- z->state->sub.marker = 5; /* can't try inflateSync */
- break;
- }
- if ((z->state->sub.method >> 4) + 8 > z->state->wbits)
- {
- z->state->mode = BAD;
- z->msg = (char*)"invalid window size";
- z->state->sub.marker = 5; /* can't try inflateSync */
- break;
- }
- z->state->mode = FLAG;
- /* fall through */
- case FLAG:
- NEEDBYTE
- b = NEXTBYTE;
- if (((z->state->sub.method << 8) + b) % 31)
- {
- z->state->mode = BAD;
- z->msg = (char*)"incorrect header check";
- z->state->sub.marker = 5; /* can't try inflateSync */
- break;
- }
- Tracev((stderr, "inflate: zlib header ok\n"));
- if (!(b & PRESET_DICT))
- {
- z->state->mode = BLOCKS;
- break;
- }
- z->state->mode = DICT4;
- /* fall through */
- case DICT4:
- NEEDBYTE
- z->state->sub.check.need = (uLong)NEXTBYTE << 24;
- z->state->mode = DICT3;
- /* fall through */
- case DICT3:
- NEEDBYTE
- z->state->sub.check.need += (uLong)NEXTBYTE << 16;
- z->state->mode = DICT2;
- /* fall through */
- case DICT2:
- NEEDBYTE
- z->state->sub.check.need += (uLong)NEXTBYTE << 8;
- z->state->mode = DICT1;
- /* fall through */
- case DICT1:
- NEEDBYTE
- z->state->sub.check.need += (uLong)NEXTBYTE;
- z->adler = z->state->sub.check.need;
- z->state->mode = DICT0;
- return Z_NEED_DICT;
- case DICT0:
- z->state->mode = BAD;
- z->msg = (char*)"need dictionary";
- z->state->sub.marker = 0; /* can try inflateSync */
- return Z_STREAM_ERROR;
- case BLOCKS:
- r = inflate_blocks(z->state->blocks, z, r);
- if (r == Z_DATA_ERROR)
- {
- z->state->mode = BAD;
- z->state->sub.marker = 0; /* can try inflateSync */
- break;
- }
- if (r == Z_OK)
- r = f;
- if (r != Z_STREAM_END)
- return r;
- r = f;
- inflate_blocks_reset(z->state->blocks, z, &z->state->sub.check.was);
- if (z->state->nowrap)
- {
- z->state->mode = DONE;
- break;
- }
- z->state->mode = CHECK4;
- /* fall through */
- case CHECK4:
- NEEDBYTE
- z->state->sub.check.need = (uLong)NEXTBYTE << 24;
- z->state->mode = CHECK3;
- /* fall through */
- case CHECK3:
- NEEDBYTE
- z->state->sub.check.need += (uLong)NEXTBYTE << 16;
- z->state->mode = CHECK2;
- /* fall through */
- case CHECK2:
- NEEDBYTE
- z->state->sub.check.need += (uLong)NEXTBYTE << 8;
- z->state->mode = CHECK1;
- /* fall through */
- case CHECK1:
- NEEDBYTE
- z->state->sub.check.need += (uLong)NEXTBYTE;
-
- if (z->state->sub.check.was != z->state->sub.check.need)
- {
- z->state->mode = BAD;
- z->msg = (char*)"incorrect data check";
- z->state->sub.marker = 5; /* can't try inflateSync */
+#ifdef BUILDFIXED
+ static int virgin = 1;
+ static code *lenfix, *distfix;
+ static code fixed[544];
+
+ /* build fixed huffman tables if first call (may not be thread safe) */
+ if (virgin) {
+ unsigned sym, bits;
+ static code *next;
+
+ /* literal/length table */
+ sym = 0;
+ while (sym < 144) state->lens[sym++] = 8;
+ while (sym < 256) state->lens[sym++] = 9;
+ while (sym < 280) state->lens[sym++] = 7;
+ while (sym < 288) state->lens[sym++] = 8;
+ next = fixed;
+ lenfix = next;
+ bits = 9;
+ inflate_table(LENS, state->lens, 288, &(next), &(bits), state->work);
+
+ /* distance table */
+ sym = 0;
+ while (sym < 32) state->lens[sym++] = 5;
+ distfix = next;
+ bits = 5;
+ inflate_table(DISTS, state->lens, 32, &(next), &(bits), state->work);
+
+ /* do this just once */
+ virgin = 0;
+ }
+#else /* !BUILDFIXED */
+# include "inffixed.h"
+#endif /* BUILDFIXED */
+ state->lencode = lenfix;
+ state->lenbits = 9;
+ state->distcode = distfix;
+ state->distbits = 5;
+}
+
+#ifdef MAKEFIXED
+#include <stdio.h>
+
+/*
+ Write out the inffixed.h that is #include'd above. Defining MAKEFIXED also
+ defines BUILDFIXED, so the tables are built on the fly. makefixed() writes
+ those tables to stdout, which would be piped to inffixed.h. A small program
+ can simply call makefixed to do this:
+
+ void makefixed(void);
+
+ int main(void)
+ {
+ makefixed();
+ return 0;
+ }
+
+ Then that can be linked with zlib built with MAKEFIXED defined and run:
+
+ a.out > inffixed.h
+ */
+void makefixed()
+{
+ unsigned low, size;
+ struct inflate_state state;
+
+ fixedtables(&state);
+ puts(" /* inffixed.h -- table for decoding fixed codes");
+ puts(" * Generated automatically by makefixed().");
+ puts(" */");
+ puts("");
+ puts(" /* WARNING: this file should *not* be used by applications.");
+ puts(" It is part of the implementation of this library and is");
+ puts(" subject to change. Applications should only use zlib.h.");
+ puts(" */");
+ puts("");
+ size = 1U << 9;
+ printf(" static const code lenfix[%u] = {", size);
+ low = 0;
+ for (;;) {
+ if ((low % 7) == 0) printf("\n ");
+ printf("{%u,%u,%d}", (low & 127) == 99 ? 64 : state.lencode[low].op,
+ state.lencode[low].bits, state.lencode[low].val);
+ if (++low == size) break;
+ putchar(',');
+ }
+ puts("\n };");
+ size = 1U << 5;
+ printf("\n static const code distfix[%u] = {", size);
+ low = 0;
+ for (;;) {
+ if ((low % 6) == 0) printf("\n ");
+ printf("{%u,%u,%d}", state.distcode[low].op, state.distcode[low].bits,
+ state.distcode[low].val);
+ if (++low == size) break;
+ putchar(',');
+ }
+ puts("\n };");
+}
+#endif /* MAKEFIXED */
+
+/*
+ Update the window with the last wsize (normally 32K) bytes written before
+ returning. If window does not exist yet, create it. This is only called
+ when a window is already in use, or when output has been written during this
+ inflate call, but the end of the deflate stream has not been reached yet.
+ It is also called to create a window for dictionary data when a dictionary
+ is loaded.
+
+ Providing output buffers larger than 32K to inflate() should provide a speed
+ advantage, since only the last 32K of output is copied to the sliding window
+ upon return from inflate(), and since all distances after the first 32K of
+ output will fall in the output data, making match copies simpler and faster.
+ The advantage may be dependent on the size of the processor's data caches.
+ */
+local int updatewindow(
+ z_streamp strm,
+ const Bytef *end,
+ unsigned copy)
+{
+ struct inflate_state FAR *state;
+ unsigned dist;
+
+ state = (struct inflate_state FAR *)strm->state;
+
+ /* if it hasn't been done already, allocate space for the window */
+ if (state->window == Z_NULL) {
+ state->window = (unsigned char FAR *)
+ ZALLOC(strm, 1U << state->wbits,
+ sizeof(unsigned char));
+ if (state->window == Z_NULL) return 1;
+ }
+
+ /* if window not in use yet, initialize */
+ if (state->wsize == 0) {
+ state->wsize = 1U << state->wbits;
+ state->wnext = 0;
+ state->whave = 0;
+ }
+
+ /* copy state->wsize or less output bytes into the circular window */
+ if (copy >= state->wsize) {
+ zmemcpy(state->window, end - state->wsize, state->wsize);
+ state->wnext = 0;
+ state->whave = state->wsize;
+ }
+ else {
+ dist = state->wsize - state->wnext;
+ if (dist > copy) dist = copy;
+ zmemcpy(state->window + state->wnext, end - copy, dist);
+ copy -= dist;
+ if (copy) {
+ zmemcpy(state->window, end - copy, copy);
+ state->wnext = copy;
+ state->whave = state->wsize;
+ }
+ else {
+ state->wnext += dist;
+ if (state->wnext == state->wsize) state->wnext = 0;
+ if (state->whave < state->wsize) state->whave += dist;
+ }
+ }
+ return 0;
+}
+
+/* Macros for inflate(): */
+
+/* check function to use adler32() for zlib or crc32() for gzip */
+#ifdef GUNZIP
+# define UPDATE(check, buf, len) \
+ (state->flags ? crc32(check, buf, len) : adler32(check, buf, len))
+#else
+# define UPDATE(check, buf, len) adler32(check, buf, len)
+#endif
+
+/* check macros for header crc */
+#ifdef GUNZIP
+# define CRC2(check, word) \
+ do { \
+ hbuf[0] = (unsigned char)(word); \
+ hbuf[1] = (unsigned char)((word) >> 8); \
+ check = crc32(check, hbuf, 2); \
+ } while (0)
+
+# define CRC4(check, word) \
+ do { \
+ hbuf[0] = (unsigned char)(word); \
+ hbuf[1] = (unsigned char)((word) >> 8); \
+ hbuf[2] = (unsigned char)((word) >> 16); \
+ hbuf[3] = (unsigned char)((word) >> 24); \
+ check = crc32(check, hbuf, 4); \
+ } while (0)
+#endif
+
+/* Load registers with state in inflate() for speed */
+#define LOAD() \
+ do { \
+ put = strm->next_out; \
+ left = strm->avail_out; \
+ next = strm->next_in; \
+ have = strm->avail_in; \
+ hold = state->hold; \
+ bits = state->bits; \
+ } while (0)
+
+/* Restore state from registers in inflate() */
+#define RESTORE() \
+ do { \
+ strm->next_out = put; \
+ strm->avail_out = left; \
+ strm->next_in = next; \
+ strm->avail_in = have; \
+ state->hold = hold; \
+ state->bits = bits; \
+ } while (0)
+
+/* Clear the input bit accumulator */
+#define INITBITS() \
+ do { \
+ hold = 0; \
+ bits = 0; \
+ } while (0)
+
+/* Get a byte of input into the bit accumulator, or return from inflate()
+ if there is no input available. */
+#define PULLBYTE() \
+ do { \
+ if (have == 0) goto inf_leave; \
+ have--; \
+ hold += (unsigned long)(*next++) << bits; \
+ bits += 8; \
+ } while (0)
+
+/* Assure that there are at least n bits in the bit accumulator. If there is
+ not enough available input to do that, then return from inflate(). */
+#define NEEDBITS(n) \
+ do { \
+ while (bits < (unsigned)(n)) \
+ PULLBYTE(); \
+ } while (0)
+
+/* Return the low n bits of the bit accumulator (n < 16) */
+#define BITS(n) \
+ ((unsigned)hold & ((1U << (n)) - 1))
+
+/* Remove n bits from the bit accumulator */
+#define DROPBITS(n) \
+ do { \
+ hold >>= (n); \
+ bits -= (unsigned)(n); \
+ } while (0)
+
+/* Remove zero to seven bits as needed to go to a byte boundary */
+#define BYTEBITS() \
+ do { \
+ hold >>= bits & 7; \
+ bits -= bits & 7; \
+ } while (0)
+
+/*
+ inflate() uses a state machine to process as much input data and generate as
+ much output data as possible before returning. The state machine is
+ structured roughly as follows:
+
+ for (;;) switch (state) {
+ ...
+ case STATEn:
+ if (not enough input data or output space to make progress)
+ return;
+ ... make progress ...
+ state = STATEm;
break;
- }
- Tracev((stderr, "inflate: zlib check ok\n"));
- z->state->mode = DONE;
- /* fall through */
- case DONE:
- return Z_STREAM_END;
- case BAD:
- return Z_DATA_ERROR;
- default:
- return Z_STREAM_ERROR;
- }
-#ifdef NEED_DUMMY_RETURN
- return Z_STREAM_ERROR; /* Some dumb compilers complain without this */
+ ...
+ }
+
+ so when inflate() is called again, the same case is attempted again, and
+ if the appropriate resources are provided, the machine proceeds to the
+ next state. The NEEDBITS() macro is usually the way the state evaluates
+ whether it can proceed or should return. NEEDBITS() does the return if
+ the requested bits are not available. The typical use of the BITS macros
+ is:
+
+ NEEDBITS(n);
+ ... do something with BITS(n) ...
+ DROPBITS(n);
+
+ where NEEDBITS(n) either returns from inflate() if there isn't enough
+ input left to load n bits into the accumulator, or it continues. BITS(n)
+ gives the low n bits in the accumulator. When done, DROPBITS(n) drops
+ the low n bits off the accumulator. INITBITS() clears the accumulator
+ and sets the number of available bits to zero. BYTEBITS() discards just
+ enough bits to put the accumulator on a byte boundary. After BYTEBITS()
+ and a NEEDBITS(8), then BITS(8) would return the next byte in the stream.
+
+ NEEDBITS(n) uses PULLBYTE() to get an available byte of input, or to return
+ if there is no input available. The decoding of variable length codes uses
+ PULLBYTE() directly in order to pull just enough bytes to decode the next
+ code, and no more.
+
+ Some states loop until they get enough input, making sure that enough
+ state information is maintained to continue the loop where it left off
+ if NEEDBITS() returns in the loop. For example, want, need, and keep
+ would all have to actually be part of the saved state in case NEEDBITS()
+ returns:
+
+ case STATEw:
+ while (want < need) {
+ NEEDBITS(n);
+ keep[want++] = BITS(n);
+ DROPBITS(n);
+ }
+ state = STATEx;
+ case STATEx:
+
+ As shown above, if the next state is also the next case, then the break
+ is omitted.
+
+ A state may also return if there is not enough output space available to
+ complete that state. Those states are copying stored data, writing a
+ literal byte, and copying a matching string.
+
+ When returning, a "goto inf_leave" is used to update the total counters,
+ update the check value, and determine whether any progress has been made
+ during that inflate() call in order to return the proper return code.
+ Progress is defined as a change in either strm->avail_in or strm->avail_out.
+ When there is a window, goto inf_leave will update the window with the last
+ output written. If a goto inf_leave occurs in the middle of decompression
+ and there is no window currently, goto inf_leave will create one and copy
+ output to the window for the next call of inflate().
+
+ In this implementation, the flush parameter of inflate() only affects the
+ return code (per zlib.h). inflate() always writes as much as possible to
+ strm->next_out, given the space available and the provided input--the effect
+ documented in zlib.h of Z_SYNC_FLUSH. Furthermore, inflate() always defers
+ the allocation of and copying into a sliding window until necessary, which
+ provides the effect documented in zlib.h for Z_FINISH when the entire input
+ stream available. So the only thing the flush parameter actually does is:
+ when flush is set to Z_FINISH, inflate() cannot return Z_OK. Instead it
+ will return Z_BUF_ERROR if it has not reached the end of the stream.
+ */
+
+int ZEXPORT inflate(
+ z_streamp strm,
+ int flush)
+{
+ struct inflate_state FAR *state;
+ z_const unsigned char FAR *next; /* next input */
+ unsigned char FAR *put; /* next output */
+ unsigned have, left; /* available input and output */
+ unsigned long hold; /* bit buffer */
+ unsigned bits; /* bits in bit buffer */
+ unsigned in, out; /* save starting available input and output */
+ unsigned copy; /* number of stored or match bytes to copy */
+ unsigned char FAR *from; /* where to copy match bytes from */
+ code here; /* current decoding table entry */
+ code last; /* parent table entry */
+ unsigned len; /* length to copy for repeats, bits to drop */
+ int ret; /* return code */
+#ifdef GUNZIP
+ unsigned char hbuf[4]; /* buffer for gzip header crc calculation */
#endif
+ static const unsigned short order[19] = /* permutation of code lengths */
+ {16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15};
+
+ if (inflateStateCheck(strm) || strm->next_out == Z_NULL ||
+ (strm->next_in == Z_NULL && strm->avail_in != 0))
+ return Z_STREAM_ERROR;
+
+ state = (struct inflate_state FAR *)strm->state;
+ if (state->mode == TYPE) state->mode = TYPEDO; /* skip check */
+ LOAD();
+ in = have;
+ out = left;
+ ret = Z_OK;
+ for (;;)
+ switch (state->mode) {
+ case HEAD:
+ if (state->wrap == 0) {
+ state->mode = TYPEDO;
+ break;
+ }
+ NEEDBITS(16);
+#ifdef GUNZIP
+ if ((state->wrap & 2) && hold == 0x8b1f) { /* gzip header */
+ if (state->wbits == 0)
+ state->wbits = 15;
+ state->check = crc32(0L, Z_NULL, 0);
+ CRC2(state->check, hold);
+ INITBITS();
+ state->mode = FLAGS;
+ break;
+ }
+ state->flags = 0; /* expect zlib header */
+ if (state->head != Z_NULL)
+ state->head->done = -1;
+ if (!(state->wrap & 1) || /* check if zlib header allowed */
+#else
+ if (
+#endif
+ ((BITS(8) << 8) + (hold >> 8)) % 31) {
+ strm->msg = (char *)"incorrect header check";
+ state->mode = BAD;
+ break;
+ }
+ if (BITS(4) != Z_DEFLATED) {
+ strm->msg = (char *)"unknown compression method";
+ state->mode = BAD;
+ break;
+ }
+ DROPBITS(4);
+ len = BITS(4) + 8;
+ if (state->wbits == 0)
+ state->wbits = len;
+ if (len > 15 || len > state->wbits) {
+ strm->msg = (char *)"invalid window size";
+ state->mode = BAD;
+ break;
+ }
+ state->dmax = 1U << len;
+ Tracev((stderr, "inflate: zlib header ok\n"));
+ strm->adler = state->check = adler32(0L, Z_NULL, 0);
+ state->mode = hold & 0x200 ? DICTID : TYPE;
+ INITBITS();
+ break;
+#ifdef GUNZIP
+ case FLAGS:
+ NEEDBITS(16);
+ state->flags = (int)(hold);
+ if ((state->flags & 0xff) != Z_DEFLATED) {
+ strm->msg = (char *)"unknown compression method";
+ state->mode = BAD;
+ break;
+ }
+ if (state->flags & 0xe000) {
+ strm->msg = (char *)"unknown header flags set";
+ state->mode = BAD;
+ break;
+ }
+ if (state->head != Z_NULL)
+ state->head->text = (int)((hold >> 8) & 1);
+ if ((state->flags & 0x0200) && (state->wrap & 4))
+ CRC2(state->check, hold);
+ INITBITS();
+ state->mode = TIME;
+ case TIME:
+ NEEDBITS(32);
+ if (state->head != Z_NULL)
+ state->head->time = hold;
+ if ((state->flags & 0x0200) && (state->wrap & 4))
+ CRC4(state->check, hold);
+ INITBITS();
+ state->mode = OS;
+ case OS:
+ NEEDBITS(16);
+ if (state->head != Z_NULL) {
+ state->head->xflags = (int)(hold & 0xff);
+ state->head->os = (int)(hold >> 8);
+ }
+ if ((state->flags & 0x0200) && (state->wrap & 4))
+ CRC2(state->check, hold);
+ INITBITS();
+ state->mode = EXLEN;
+ case EXLEN:
+ if (state->flags & 0x0400) {
+ NEEDBITS(16);
+ state->length = (unsigned)(hold);
+ if (state->head != Z_NULL)
+ state->head->extra_len = (unsigned)hold;
+ if ((state->flags & 0x0200) && (state->wrap & 4))
+ CRC2(state->check, hold);
+ INITBITS();
+ }
+ else if (state->head != Z_NULL)
+ state->head->extra = Z_NULL;
+ state->mode = EXTRA;
+ case EXTRA:
+ if (state->flags & 0x0400) {
+ copy = state->length;
+ if (copy > have) copy = have;
+ if (copy) {
+ if (state->head != Z_NULL &&
+ state->head->extra != Z_NULL) {
+ len = state->head->extra_len - state->length;
+ zmemcpy(state->head->extra + len, next,
+ len + copy > state->head->extra_max ?
+ state->head->extra_max - len : copy);
+ }
+ if ((state->flags & 0x0200) && (state->wrap & 4))
+ state->check = crc32(state->check, next, copy);
+ have -= copy;
+ next += copy;
+ state->length -= copy;
+ }
+ if (state->length) goto inf_leave;
+ }
+ state->length = 0;
+ state->mode = NAME;
+ case NAME:
+ if (state->flags & 0x0800) {
+ if (have == 0) goto inf_leave;
+ copy = 0;
+ do {
+ len = (unsigned)(next[copy++]);
+ if (state->head != Z_NULL &&
+ state->head->name != Z_NULL &&
+ state->length < state->head->name_max)
+ state->head->name[state->length++] = (Bytef)len;
+ } while (len && copy < have);
+ if ((state->flags & 0x0200) && (state->wrap & 4))
+ state->check = crc32(state->check, next, copy);
+ have -= copy;
+ next += copy;
+ if (len) goto inf_leave;
+ }
+ else if (state->head != Z_NULL)
+ state->head->name = Z_NULL;
+ state->length = 0;
+ state->mode = COMMENT;
+ case COMMENT:
+ if (state->flags & 0x1000) {
+ if (have == 0) goto inf_leave;
+ copy = 0;
+ do {
+ len = (unsigned)(next[copy++]);
+ if (state->head != Z_NULL &&
+ state->head->comment != Z_NULL &&
+ state->length < state->head->comm_max)
+ state->head->comment[state->length++] = (Bytef)len;
+ } while (len && copy < have);
+ if ((state->flags & 0x0200) && (state->wrap & 4))
+ state->check = crc32(state->check, next, copy);
+ have -= copy;
+ next += copy;
+ if (len) goto inf_leave;
+ }
+ else if (state->head != Z_NULL)
+ state->head->comment = Z_NULL;
+ state->mode = HCRC;
+ case HCRC:
+ if (state->flags & 0x0200) {
+ NEEDBITS(16);
+ if ((state->wrap & 4) && hold != (state->check & 0xffff)) {
+ strm->msg = (char *)"header crc mismatch";
+ state->mode = BAD;
+ break;
+ }
+ INITBITS();
+ }
+ if (state->head != Z_NULL) {
+ state->head->hcrc = (int)((state->flags >> 9) & 1);
+ state->head->done = 1;
+ }
+ strm->adler = state->check = crc32(0L, Z_NULL, 0);
+ state->mode = TYPE;
+ break;
+#endif
+ case DICTID:
+ NEEDBITS(32);
+ strm->adler = state->check = ZSWAP32(hold);
+ INITBITS();
+ state->mode = DICT;
+ case DICT:
+ if (state->havedict == 0) {
+ RESTORE();
+ return Z_NEED_DICT;
+ }
+ strm->adler = state->check = adler32(0L, Z_NULL, 0);
+ state->mode = TYPE;
+ case TYPE:
+ if (flush == Z_BLOCK || flush == Z_TREES) goto inf_leave;
+ case TYPEDO:
+ if (state->last) {
+ BYTEBITS();
+ state->mode = CHECK;
+ break;
+ }
+ NEEDBITS(3);
+ state->last = BITS(1);
+ DROPBITS(1);
+ switch (BITS(2)) {
+ case 0: /* stored block */
+ Tracev((stderr, "inflate: stored block%s\n",
+ state->last ? " (last)" : ""));
+ state->mode = STORED;
+ break;
+ case 1: /* fixed block */
+ fixedtables(state);
+ Tracev((stderr, "inflate: fixed codes block%s\n",
+ state->last ? " (last)" : ""));
+ state->mode = LEN_; /* decode codes */
+ if (flush == Z_TREES) {
+ DROPBITS(2);
+ goto inf_leave;
+ }
+ break;
+ case 2: /* dynamic block */
+ Tracev((stderr, "inflate: dynamic codes block%s\n",
+ state->last ? " (last)" : ""));
+ state->mode = TABLE;
+ break;
+ case 3:
+ strm->msg = (char *)"invalid block type";
+ state->mode = BAD;
+ }
+ DROPBITS(2);
+ break;
+ case STORED:
+ BYTEBITS(); /* go to byte boundary */
+ NEEDBITS(32);
+ if ((hold & 0xffff) != ((hold >> 16) ^ 0xffff)) {
+ strm->msg = (char *)"invalid stored block lengths";
+ state->mode = BAD;
+ break;
+ }
+ state->length = (unsigned)hold & 0xffff;
+ Tracev((stderr, "inflate: stored length %u\n",
+ state->length));
+ INITBITS();
+ state->mode = COPY_;
+ if (flush == Z_TREES) goto inf_leave;
+ case COPY_:
+ state->mode = COPY;
+ case COPY:
+ copy = state->length;
+ if (copy) {
+ if (copy > have) copy = have;
+ if (copy > left) copy = left;
+ if (copy == 0) goto inf_leave;
+ zmemcpy(put, next, copy);
+ have -= copy;
+ next += copy;
+ left -= copy;
+ put += copy;
+ state->length -= copy;
+ break;
+ }
+ Tracev((stderr, "inflate: stored end\n"));
+ state->mode = TYPE;
+ break;
+ case TABLE:
+ NEEDBITS(14);
+ state->nlen = BITS(5) + 257;
+ DROPBITS(5);
+ state->ndist = BITS(5) + 1;
+ DROPBITS(5);
+ state->ncode = BITS(4) + 4;
+ DROPBITS(4);
+#ifndef PKZIP_BUG_WORKAROUND
+ if (state->nlen > 286 || state->ndist > 30) {
+ strm->msg = (char *)"too many length or distance symbols";
+ state->mode = BAD;
+ break;
+ }
+#endif
+ Tracev((stderr, "inflate: table sizes ok\n"));
+ state->have = 0;
+ state->mode = LENLENS;
+ case LENLENS:
+ while (state->have < state->ncode) {
+ NEEDBITS(3);
+ state->lens[order[state->have++]] = (unsigned short)BITS(3);
+ DROPBITS(3);
+ }
+ while (state->have < 19)
+ state->lens[order[state->have++]] = 0;
+ state->next = state->codes;
+ state->lencode = (const code FAR *)(state->next);
+ state->lenbits = 7;
+ ret = inflate_table(CODES, state->lens, 19, &(state->next),
+ &(state->lenbits), state->work);
+ if (ret) {
+ strm->msg = (char *)"invalid code lengths set";
+ state->mode = BAD;
+ break;
+ }
+ Tracev((stderr, "inflate: code lengths ok\n"));
+ state->have = 0;
+ state->mode = CODELENS;
+ case CODELENS:
+ while (state->have < state->nlen + state->ndist) {
+ for (;;) {
+ here = state->lencode[BITS(state->lenbits)];
+ if ((unsigned)(here.bits) <= bits) break;
+ PULLBYTE();
+ }
+ if (here.val < 16) {
+ DROPBITS(here.bits);
+ state->lens[state->have++] = here.val;
+ }
+ else {
+ if (here.val == 16) {
+ NEEDBITS(here.bits + 2);
+ DROPBITS(here.bits);
+ if (state->have == 0) {
+ strm->msg = (char *)"invalid bit length repeat";
+ state->mode = BAD;
+ break;
+ }
+ len = state->lens[state->have - 1];
+ copy = 3 + BITS(2);
+ DROPBITS(2);
+ }
+ else if (here.val == 17) {
+ NEEDBITS(here.bits + 3);
+ DROPBITS(here.bits);
+ len = 0;
+ copy = 3 + BITS(3);
+ DROPBITS(3);
+ }
+ else {
+ NEEDBITS(here.bits + 7);
+ DROPBITS(here.bits);
+ len = 0;
+ copy = 11 + BITS(7);
+ DROPBITS(7);
+ }
+ if (state->have + copy > state->nlen + state->ndist) {
+ strm->msg = (char *)"invalid bit length repeat";
+ state->mode = BAD;
+ break;
+ }
+ while (copy--)
+ state->lens[state->have++] = (unsigned short)len;
+ }
+ }
+
+ /* handle error breaks in while */
+ if (state->mode == BAD) break;
+
+ /* check for end-of-block code (better have one) */
+ if (state->lens[256] == 0) {
+ strm->msg = (char *)"invalid code -- missing end-of-block";
+ state->mode = BAD;
+ break;
+ }
+
+ /* build code tables -- note: do not change the lenbits or distbits
+ values here (9 and 6) without reading the comments in inftrees.h
+ concerning the ENOUGH constants, which depend on those values */
+ state->next = state->codes;
+ state->lencode = (const code FAR *)(state->next);
+ state->lenbits = 9;
+ ret = inflate_table(LENS, state->lens, state->nlen, &(state->next),
+ &(state->lenbits), state->work);
+ if (ret) {
+ strm->msg = (char *)"invalid literal/lengths set";
+ state->mode = BAD;
+ break;
+ }
+ state->distcode = (const code FAR *)(state->next);
+ state->distbits = 6;
+ ret = inflate_table(DISTS, state->lens + state->nlen, state->ndist,
+ &(state->next), &(state->distbits), state->work);
+ if (ret) {
+ strm->msg = (char *)"invalid distances set";
+ state->mode = BAD;
+ break;
+ }
+ Tracev((stderr, "inflate: codes ok\n"));
+ state->mode = LEN_;
+ if (flush == Z_TREES) goto inf_leave;
+ case LEN_:
+ state->mode = LEN;
+ case LEN:
+ if (have >= 6 && left >= 258) {
+ RESTORE();
+ inflate_fast(strm, out);
+ LOAD();
+ if (state->mode == TYPE)
+ state->back = -1;
+ break;
+ }
+ state->back = 0;
+ for (;;) {
+ here = state->lencode[BITS(state->lenbits)];
+ if ((unsigned)(here.bits) <= bits) break;
+ PULLBYTE();
+ }
+ if (here.op && (here.op & 0xf0) == 0) {
+ last = here;
+ for (;;) {
+ here = state->lencode[last.val +
+ (BITS(last.bits + last.op) >> last.bits)];
+ if ((unsigned)(last.bits + here.bits) <= bits) break;
+ PULLBYTE();
+ }
+ DROPBITS(last.bits);
+ state->back += last.bits;
+ }
+ DROPBITS(here.bits);
+ state->back += here.bits;
+ state->length = (unsigned)here.val;
+ if ((int)(here.op) == 0) {
+ Tracevv((stderr, here.val >= 0x20 && here.val < 0x7f ?
+ "inflate: literal '%c'\n" :
+ "inflate: literal 0x%02x\n", here.val));
+ state->mode = LIT;
+ break;
+ }
+ if (here.op & 32) {
+ Tracevv((stderr, "inflate: end of block\n"));
+ state->back = -1;
+ state->mode = TYPE;
+ break;
+ }
+ if (here.op & 64) {
+ strm->msg = (char *)"invalid literal/length code";
+ state->mode = BAD;
+ break;
+ }
+ state->extra = (unsigned)(here.op) & 15;
+ state->mode = LENEXT;
+ case LENEXT:
+ if (state->extra) {
+ NEEDBITS(state->extra);
+ state->length += BITS(state->extra);
+ DROPBITS(state->extra);
+ state->back += state->extra;
+ }
+ Tracevv((stderr, "inflate: length %u\n", state->length));
+ state->was = state->length;
+ state->mode = DIST;
+ case DIST:
+ for (;;) {
+ here = state->distcode[BITS(state->distbits)];
+ if ((unsigned)(here.bits) <= bits) break;
+ PULLBYTE();
+ }
+ if ((here.op & 0xf0) == 0) {
+ last = here;
+ for (;;) {
+ here = state->distcode[last.val +
+ (BITS(last.bits + last.op) >> last.bits)];
+ if ((unsigned)(last.bits + here.bits) <= bits) break;
+ PULLBYTE();
+ }
+ DROPBITS(last.bits);
+ state->back += last.bits;
+ }
+ DROPBITS(here.bits);
+ state->back += here.bits;
+ if (here.op & 64) {
+ strm->msg = (char *)"invalid distance code";
+ state->mode = BAD;
+ break;
+ }
+ state->offset = (unsigned)here.val;
+ state->extra = (unsigned)(here.op) & 15;
+ state->mode = DISTEXT;
+ case DISTEXT:
+ if (state->extra) {
+ NEEDBITS(state->extra);
+ state->offset += BITS(state->extra);
+ DROPBITS(state->extra);
+ state->back += state->extra;
+ }
+#ifdef INFLATE_STRICT
+ if (state->offset > state->dmax) {
+ strm->msg = (char *)"invalid distance too far back";
+ state->mode = BAD;
+ break;
+ }
+#endif
+ Tracevv((stderr, "inflate: distance %u\n", state->offset));
+ state->mode = MATCH;
+ case MATCH:
+ if (left == 0) goto inf_leave;
+ copy = out - left;
+ if (state->offset > copy) { /* copy from window */
+ copy = state->offset - copy;
+ if (copy > state->whave) {
+ if (state->sane) {
+ strm->msg = (char *)"invalid distance too far back";
+ state->mode = BAD;
+ break;
+ }
+#ifdef INFLATE_ALLOW_INVALID_DISTANCE_TOOFAR_ARRR
+ Trace((stderr, "inflate.c too far\n"));
+ copy -= state->whave;
+ if (copy > state->length) copy = state->length;
+ if (copy > left) copy = left;
+ left -= copy;
+ state->length -= copy;
+ do {
+ *put++ = 0;
+ } while (--copy);
+ if (state->length == 0) state->mode = LEN;
+ break;
+#endif
+ }
+ if (copy > state->wnext) {
+ copy -= state->wnext;
+ from = state->window + (state->wsize - copy);
+ }
+ else
+ from = state->window + (state->wnext - copy);
+ if (copy > state->length) copy = state->length;
+ }
+ else { /* copy from output */
+ from = put - state->offset;
+ copy = state->length;
+ }
+ if (copy > left) copy = left;
+ left -= copy;
+ state->length -= copy;
+ do {
+ *put++ = *from++;
+ } while (--copy);
+ if (state->length == 0) state->mode = LEN;
+ break;
+ case LIT:
+ if (left == 0) goto inf_leave;
+ *put++ = (unsigned char)(state->length);
+ left--;
+ state->mode = LEN;
+ break;
+ case CHECK:
+ if (state->wrap) {
+ NEEDBITS(32);
+ out -= left;
+ strm->total_out += out;
+ state->total += out;
+ if ((state->wrap & 4) && out)
+ strm->adler = state->check =
+ UPDATE(state->check, put - out, out);
+ out = left;
+ if ((state->wrap & 4) && (
+#ifdef GUNZIP
+ state->flags ? hold :
+#endif
+ ZSWAP32(hold)) != state->check) {
+ strm->msg = (char *)"incorrect data check";
+ state->mode = BAD;
+ break;
+ }
+ INITBITS();
+ Tracev((stderr, "inflate: check matches trailer\n"));
+ }
+#ifdef GUNZIP
+ state->mode = LENGTH;
+ case LENGTH:
+ if (state->wrap && state->flags) {
+ NEEDBITS(32);
+ if (hold != (state->total & 0xffffffffUL)) {
+ strm->msg = (char *)"incorrect length check";
+ state->mode = BAD;
+ break;
+ }
+ INITBITS();
+ Tracev((stderr, "inflate: length matches trailer\n"));
+ }
+#endif
+ state->mode = DONE;
+ case DONE:
+ ret = Z_STREAM_END;
+ goto inf_leave;
+ case BAD:
+ ret = Z_DATA_ERROR;
+ goto inf_leave;
+ case MEM:
+ return Z_MEM_ERROR;
+ case SYNC:
+ default:
+ return Z_STREAM_ERROR;
+ }
+
+ /*
+ Return from inflate(), updating the total counts and the check value.
+ If there was no progress during the inflate() call, return a buffer
+ error. Call updatewindow() to create and/or update the window state.
+ Note: a memory error from inflate() is non-recoverable.
+ */
+ inf_leave:
+ RESTORE();
+ if (state->wsize || (out != strm->avail_out && state->mode < BAD &&
+ (state->mode < CHECK || flush != Z_FINISH)))
+ if (updatewindow(strm, strm->next_out, out - strm->avail_out)) {
+ state->mode = MEM;
+ return Z_MEM_ERROR;
+ }
+ in -= strm->avail_in;
+ out -= strm->avail_out;
+ strm->total_in += in;
+ strm->total_out += out;
+ state->total += out;
+ if ((state->wrap & 4) && out)
+ strm->adler = state->check =
+ UPDATE(state->check, strm->next_out - out, out);
+ strm->data_type = (int)state->bits + (state->last ? 64 : 0) +
+ (state->mode == TYPE ? 128 : 0) +
+ (state->mode == LEN_ || state->mode == COPY_ ? 256 : 0);
+ if (((in == 0 && out == 0) || flush == Z_FINISH) && ret == Z_OK)
+ ret = Z_BUF_ERROR;
+ return ret;
+}
+
+int ZEXPORT inflateEnd(
+ z_streamp strm)
+{
+ struct inflate_state FAR *state;
+ if (inflateStateCheck(strm))
+ return Z_STREAM_ERROR;
+ state = (struct inflate_state FAR *)strm->state;
+ if (state->window != Z_NULL) ZFREE(strm, state->window);
+ ZFREE(strm, strm->state);
+ strm->state = Z_NULL;
+ Tracev((stderr, "inflate: end\n"));
+ return Z_OK;
+}
+
+#ifndef Z_FREETYPE
+
+int ZEXPORT inflateGetDictionary(
+ z_streamp strm,
+ Bytef *dictionary,
+ uInt *dictLength)
+{
+ struct inflate_state FAR *state;
+
+ /* check state */
+ if (inflateStateCheck(strm)) return Z_STREAM_ERROR;
+ state = (struct inflate_state FAR *)strm->state;
+
+ /* copy dictionary */
+ if (state->whave && dictionary != Z_NULL) {
+ zmemcpy(dictionary, state->window + state->wnext,
+ state->whave - state->wnext);
+ zmemcpy(dictionary + state->whave - state->wnext,
+ state->window, state->wnext);
+ }
+ if (dictLength != Z_NULL)
+ *dictLength = state->whave;
+ return Z_OK;
+}
+
+int ZEXPORT inflateSetDictionary(
+ z_streamp strm,
+ const Bytef *dictionary,
+ uInt dictLength)
+{
+ struct inflate_state FAR *state;
+ unsigned long dictid;
+ int ret;
+
+ /* check state */
+ if (inflateStateCheck(strm)) return Z_STREAM_ERROR;
+ state = (struct inflate_state FAR *)strm->state;
+ if (state->wrap != 0 && state->mode != DICT)
+ return Z_STREAM_ERROR;
+
+ /* check for correct dictionary identifier */
+ if (state->mode == DICT) {
+ dictid = adler32(0L, Z_NULL, 0);
+ dictid = adler32(dictid, dictionary, dictLength);
+ if (dictid != state->check)
+ return Z_DATA_ERROR;
+ }
+
+ /* copy dictionary to window using updatewindow(), which will amend the
+ existing dictionary if appropriate */
+ ret = updatewindow(strm, dictionary + dictLength, dictLength);
+ if (ret) {
+ state->mode = MEM;
+ return Z_MEM_ERROR;
+ }
+ state->havedict = 1;
+ Tracev((stderr, "inflate: dictionary set\n"));
+ return Z_OK;
+}
+
+int ZEXPORT inflateGetHeader(
+ z_streamp strm,
+ gz_headerp head)
+{
+ struct inflate_state FAR *state;
+
+ /* check state */
+ if (inflateStateCheck(strm)) return Z_STREAM_ERROR;
+ state = (struct inflate_state FAR *)strm->state;
+ if ((state->wrap & 2) == 0) return Z_STREAM_ERROR;
+
+ /* save header structure */
+ state->head = head;
+ head->done = 0;
+ return Z_OK;
+}
+
+/*
+ Search buf[0..len-1] for the pattern: 0, 0, 0xff, 0xff. Return when found
+ or when out of input. When called, *have is the number of pattern bytes
+ found in order so far, in 0..3. On return *have is updated to the new
+ state. If on return *have equals four, then the pattern was found and the
+ return value is how many bytes were read including the last byte of the
+ pattern. If *have is less than four, then the pattern has not been found
+ yet and the return value is len. In the latter case, syncsearch() can be
+ called again with more data and the *have state. *have is initialized to
+ zero for the first call.
+ */
+local unsigned syncsearch(
+ unsigned FAR *have,
+ const unsigned char FAR *buf,
+ unsigned len)
+{
+ unsigned got;
+ unsigned next;
+
+ got = *have;
+ next = 0;
+ while (next < len && got < 4) {
+ if ((int)(buf[next]) == (got < 2 ? 0 : 0xff))
+ got++;
+ else if (buf[next])
+ got = 0;
+ else
+ got = 4 - got;
+ next++;
+ }
+ *have = got;
+ return next;
+}
+
+int ZEXPORT inflateSync(
+ z_streamp strm)
+{
+ unsigned len; /* number of bytes to look at or looked at */
+ unsigned long in, out; /* temporary to save total_in and total_out */
+ unsigned char buf[4]; /* to restore bit buffer to byte string */
+ struct inflate_state FAR *state;
+
+ /* check parameters */
+ if (inflateStateCheck(strm)) return Z_STREAM_ERROR;
+ state = (struct inflate_state FAR *)strm->state;
+ if (strm->avail_in == 0 && state->bits < 8) return Z_BUF_ERROR;
+
+ /* if first time, start search in bit buffer */
+ if (state->mode != SYNC) {
+ state->mode = SYNC;
+ state->hold <<= state->bits & 7;
+ state->bits -= state->bits & 7;
+ len = 0;
+ while (state->bits >= 8) {
+ buf[len++] = (unsigned char)(state->hold);
+ state->hold >>= 8;
+ state->bits -= 8;
+ }
+ state->have = 0;
+ syncsearch(&(state->have), buf, len);
+ }
+
+ /* search available input */
+ len = syncsearch(&(state->have), strm->next_in, strm->avail_in);
+ strm->avail_in -= len;
+ strm->next_in += len;
+ strm->total_in += len;
+
+ /* return no joy or set up to restart inflate() on a new block */
+ if (state->have != 4) return Z_DATA_ERROR;
+ in = strm->total_in; out = strm->total_out;
+ inflateReset(strm);
+ strm->total_in = in; strm->total_out = out;
+ state->mode = TYPE;
+ return Z_OK;
+}
+
+#endif /* !Z_FREETYPE */
+
+/*
+ Returns true if inflate is currently at the end of a block generated by
+ Z_SYNC_FLUSH or Z_FULL_FLUSH. This function is used by one PPP
+ implementation to provide an additional safety check. PPP uses
+ Z_SYNC_FLUSH but removes the length bytes of the resulting empty stored
+ block. When decompressing, PPP checks that at the end of input packet,
+ inflate is waiting for these length bytes.
+ */
+int ZEXPORT inflateSyncPoint(
+ z_streamp strm)
+{
+ struct inflate_state FAR *state;
+
+ if (inflateStateCheck(strm)) return Z_STREAM_ERROR;
+ state = (struct inflate_state FAR *)strm->state;
+ return state->mode == STORED && state->bits == 0;
+}
+
+#if !Z_FREETYPE
+
+int ZEXPORT inflateCopy(
+ z_streamp dest,
+ z_streamp source)
+{
+ struct inflate_state FAR *state;
+ struct inflate_state FAR *copy;
+ unsigned char FAR *window;
+ unsigned wsize;
+
+ /* check input */
+ if (inflateStateCheck(source) || dest == Z_NULL)
+ return Z_STREAM_ERROR;
+ state = (struct inflate_state FAR *)source->state;
+
+ /* allocate space */
+ copy = (struct inflate_state FAR *)
+ ZALLOC(source, 1, sizeof(struct inflate_state));
+ if (copy == Z_NULL) return Z_MEM_ERROR;
+ window = Z_NULL;
+ if (state->window != Z_NULL) {
+ window = (unsigned char FAR *)
+ ZALLOC(source, 1U << state->wbits, sizeof(unsigned char));
+ if (window == Z_NULL) {
+ ZFREE(source, copy);
+ return Z_MEM_ERROR;
+ }
+ }
+
+ /* copy state */
+ zmemcpy((voidpf)dest, (voidpf)source, sizeof(z_stream));
+ zmemcpy((voidpf)copy, (voidpf)state, sizeof(struct inflate_state));
+ copy->strm = dest;
+ if (state->lencode >= state->codes &&
+ state->lencode <= state->codes + ENOUGH - 1) {
+ copy->lencode = copy->codes + (state->lencode - state->codes);
+ copy->distcode = copy->codes + (state->distcode - state->codes);
+ }
+ copy->next = copy->codes + (state->next - state->codes);
+ if (window != Z_NULL) {
+ wsize = 1U << state->wbits;
+ zmemcpy(window, state->window, wsize);
+ }
+ copy->window = window;
+ dest->state = (struct internal_state FAR *)copy;
+ return Z_OK;
+}
+
+#endif /* !Z_FREETYPE */
+
+int ZEXPORT inflateUndermine(
+ z_streamp strm,
+ int subvert)
+{
+ struct inflate_state FAR *state;
+
+ if (inflateStateCheck(strm)) return Z_STREAM_ERROR;
+ state = (struct inflate_state FAR *)strm->state;
+#ifdef INFLATE_ALLOW_INVALID_DISTANCE_TOOFAR_ARRR
+ state->sane = !subvert;
+ return Z_OK;
+#else
+ (void)subvert;
+ state->sane = 1;
+ return Z_DATA_ERROR;
+#endif
+}
+
+int ZEXPORT inflateValidate(
+ z_streamp strm,
+ int check)
+{
+ struct inflate_state FAR *state;
+
+ if (inflateStateCheck(strm)) return Z_STREAM_ERROR;
+ state = (struct inflate_state FAR *)strm->state;
+ if (check)
+ state->wrap |= 4;
+ else
+ state->wrap &= ~4;
+ return Z_OK;
+}
+
+#ifndef Z_FREETYPE
+
+long ZEXPORT inflateMark(
+ z_streamp strm)
+{
+ struct inflate_state FAR *state;
+
+ if (inflateStateCheck(strm))
+ return -(1L << 16);
+ state = (struct inflate_state FAR *)strm->state;
+ return (long)(((unsigned long)((long)state->back)) << 16) +
+ (state->mode == COPY ? state->length :
+ (state->mode == MATCH ? state->was - state->length : 0));
+}
+
+unsigned long ZEXPORT inflateCodesUsed(
+ z_streamp strm)
+{
+ struct inflate_state FAR *state;
+ if (inflateStateCheck(strm)) return (unsigned long)-1;
+ state = (struct inflate_state FAR *)strm->state;
+ return (unsigned long)(state->next - state->codes);
}
+#endif /* !Z_FREETYPE */
diff --git a/src/gzip/inflate.h b/src/gzip/inflate.h
new file mode 100644
index 0000000..92ea758
--- /dev/null
+++ b/src/gzip/inflate.h
@@ -0,0 +1,130 @@
+/* inflate.h -- internal inflate state definition
+ * Copyright (C) 1995-2016 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+#ifndef INFLATE_H
+#define INFLATE_H
+
+/* WARNING: this file should *not* be used by applications. It is
+ part of the implementation of the compression library and is
+ subject to change. Applications should only use zlib.h.
+ */
+
+/* define NO_GZIP when compiling if you want to disable gzip header and
+ trailer decoding by inflate(). NO_GZIP would be used to avoid linking in
+ the crc code when it is not needed. For shared libraries, gzip decoding
+ should be left enabled. */
+#ifndef NO_GZIP
+# define GUNZIP
+#endif
+
+/* Possible inflate modes between inflate() calls */
+typedef enum {
+ HEAD = 16180, /* i: waiting for magic header */
+ FLAGS, /* i: waiting for method and flags (gzip) */
+ TIME, /* i: waiting for modification time (gzip) */
+ OS, /* i: waiting for extra flags and operating system (gzip) */
+ EXLEN, /* i: waiting for extra length (gzip) */
+ EXTRA, /* i: waiting for extra bytes (gzip) */
+ NAME, /* i: waiting for end of file name (gzip) */
+ COMMENT, /* i: waiting for end of comment (gzip) */
+ HCRC, /* i: waiting for header crc (gzip) */
+ DICTID, /* i: waiting for dictionary check value */
+ DICT, /* waiting for inflateSetDictionary() call */
+ TYPE, /* i: waiting for type bits, including last-flag bit */
+ TYPEDO, /* i: same, but skip check to exit inflate on new block */
+ STORED, /* i: waiting for stored size (length and complement) */
+ COPY_, /* i/o: same as COPY below, but only first time in */
+ COPY, /* i/o: waiting for input or output to copy stored block */
+ TABLE, /* i: waiting for dynamic block table lengths */
+ LENLENS, /* i: waiting for code length code lengths */
+ CODELENS, /* i: waiting for length/lit and distance code lengths */
+ LEN_, /* i: same as LEN below, but only first time in */
+ LEN, /* i: waiting for length/lit/eob code */
+ LENEXT, /* i: waiting for length extra bits */
+ DIST, /* i: waiting for distance code */
+ DISTEXT, /* i: waiting for distance extra bits */
+ MATCH, /* o: waiting for output space to copy string */
+ LIT, /* o: waiting for output space to write literal */
+ CHECK, /* i: waiting for 32-bit check value */
+ LENGTH, /* i: waiting for 32-bit length (gzip) */
+ DONE, /* finished check, done -- remain here until reset */
+ BAD, /* got a data error -- remain here until reset */
+ MEM, /* got an inflate() memory error -- remain here until reset */
+ SYNC /* looking for synchronization bytes to restart inflate() */
+} inflate_mode;
+
+/*
+ State transitions between above modes -
+
+ (most modes can go to BAD or MEM on error -- not shown for clarity)
+
+ Process header:
+ HEAD -> (gzip) or (zlib) or (raw)
+ (gzip) -> FLAGS -> TIME -> OS -> EXLEN -> EXTRA -> NAME -> COMMENT ->
+ HCRC -> TYPE
+ (zlib) -> DICTID or TYPE
+ DICTID -> DICT -> TYPE
+ (raw) -> TYPEDO
+ Read deflate blocks:
+ TYPE -> TYPEDO -> STORED or TABLE or LEN_ or CHECK
+ STORED -> COPY_ -> COPY -> TYPE
+ TABLE -> LENLENS -> CODELENS -> LEN_
+ LEN_ -> LEN
+ Read deflate codes in fixed or dynamic block:
+ LEN -> LENEXT or LIT or TYPE
+ LENEXT -> DIST -> DISTEXT -> MATCH -> LEN
+ LIT -> LEN
+ Process trailer:
+ CHECK -> LENGTH -> DONE
+ */
+
+/* State maintained between inflate() calls -- approximately 7K bytes, not
+ including the allocated sliding window, which is up to 32K bytes. */
+struct inflate_state {
+ z_streamp strm; /* pointer back to this zlib stream */
+ inflate_mode mode; /* current inflate mode */
+ int last; /* true if processing last block */
+ int wrap; /* bit 0 true for zlib, bit 1 true for gzip,
+ bit 2 true to validate check value */
+ int havedict; /* true if dictionary provided */
+ int flags; /* gzip header method and flags (0 if zlib) */
+ unsigned dmax; /* zlib header max distance (INFLATE_STRICT) */
+ unsigned long check; /* protected copy of check value */
+ unsigned long total; /* protected copy of output count */
+ gz_headerp head; /* where to save gzip header information */
+ /* sliding window */
+ unsigned wbits; /* log base 2 of requested window size */
+ unsigned wsize; /* window size or zero if not using window */
+ unsigned whave; /* valid bytes in the window */
+ unsigned wnext; /* window write index */
+ unsigned char FAR *window; /* allocated sliding window, if needed */
+ /* bit accumulator */
+ unsigned long hold; /* input bit accumulator */
+ unsigned bits; /* number of bits in "in" */
+ /* for string and stored block copying */
+ unsigned length; /* literal or length of data to copy */
+ unsigned offset; /* distance back to copy string from */
+ /* for table and code decoding */
+ unsigned extra; /* extra bits needed */
+ /* fixed and dynamic code tables */
+ code const FAR *lencode; /* starting table for length/literal codes */
+ code const FAR *distcode; /* starting table for distance codes */
+ unsigned lenbits; /* index bits for lencode */
+ unsigned distbits; /* index bits for distcode */
+ /* dynamic table building */
+ unsigned ncode; /* number of code length code lengths */
+ unsigned nlen; /* number of length code lengths */
+ unsigned ndist; /* number of distance code lengths */
+ unsigned have; /* number of code lengths in lens[] */
+ code FAR *next; /* next available space in codes[] */
+ unsigned short lens[320]; /* temporary storage for code lengths */
+ unsigned short work[288]; /* work area for code table building */
+ code codes[ENOUGH]; /* space for code tables */
+ int sane; /* if false, allow invalid distance too far */
+ int back; /* bits back of last unprocessed length/lit */
+ unsigned was; /* initial length of match */
+};
+
+#endif /* INFLATE_H */
diff --git a/src/gzip/inftrees.c b/src/gzip/inftrees.c
index 56f52b1..c917e3d 100644
--- a/src/gzip/inftrees.c
+++ b/src/gzip/inftrees.c
@@ -1,20 +1,15 @@
/* inftrees.c -- generate Huffman trees for efficient decoding
- * Copyright (C) 1995-2002 Mark Adler
+ * Copyright (C) 1995-2017 Mark Adler
* For conditions of distribution and use, see copyright notice in zlib.h
*/
#include "zutil.h"
#include "inftrees.h"
-#if !defined(BUILDFIXED) && !defined(STDC)
-# define BUILDFIXED /* non ANSI compilers may not accept inffixed.h */
-#endif
+#define MAXBITS 15
-
-#if 0
-local const char inflate_copyright[] =
- " inflate 1.1.4 Copyright 1995-2002 Mark Adler ";
-#endif
+const char inflate_copyright[] =
+ " inflate 1.2.11 Copyright 1995-2017 Mark Adler ";
/*
If you use the zlib library in a product, an acknowledgment is welcome
in the documentation of your product. If for some reason you cannot
@@ -22,447 +17,288 @@ local const char inflate_copyright[] =
copyright string in the executable of your product.
*/
-/* simplify the use of the inflate_huft type with some defines */
-#define exop word.what.Exop
-#define bits word.what.Bits
-
-
-local int huft_build OF((
- uIntf *, /* code lengths in bits */
- uInt, /* number of codes */
- uInt, /* number of "simple" codes */
- const uIntf *, /* list of base values for non-simple codes */
- const uIntf *, /* list of extra bits for non-simple codes */
- inflate_huft * FAR*,/* result: starting table */
- uIntf *, /* maximum lookup bits (returns actual) */
- inflate_huft *, /* space for trees */
- uInt *, /* hufts used in space */
- uIntf * )); /* space for values */
-
-/* Tables for deflate from PKZIP's appnote.txt. */
-local const uInt cplens[31] = { /* Copy lengths for literal codes 257..285 */
+/*
+ Build a set of tables to decode the provided canonical Huffman code.
+ The code lengths are lens[0..codes-1]. The result starts at *table,
+ whose indices are 0..2^bits-1. work is a writable array of at least
+ lens shorts, which is used as a work area. type is the type of code
+ to be generated, CODES, LENS, or DISTS. On return, zero is success,
+ -1 is an invalid code, and +1 means that ENOUGH isn't enough. table
+ on return points to the next available entry's address. bits is the
+ requested root table index bits, and on return it is the actual root
+ table index bits. It will differ if the request is greater than the
+ longest code or if it is less than the shortest code.
+ */
+int ZLIB_INTERNAL inflate_table(
+ codetype type,
+ unsigned short FAR *lens,
+ unsigned codes,
+ code FAR * FAR *table,
+ unsigned FAR *bits,
+ unsigned short FAR *work)
+{
+ unsigned len; /* a code's length in bits */
+ unsigned sym; /* index of code symbols */
+ unsigned min, max; /* minimum and maximum code lengths */
+ unsigned root; /* number of index bits for root table */
+ unsigned curr; /* number of index bits for current table */
+ unsigned drop; /* code bits to drop for sub-table */
+ int left; /* number of prefix codes available */
+ unsigned used; /* code entries in table used */
+ unsigned huff; /* Huffman code */
+ unsigned incr; /* for incrementing code, index */
+ unsigned fill; /* index for replicating entries */
+ unsigned low; /* low bits for current root entry */
+ unsigned mask; /* mask for low root bits */
+ code here; /* table entry for duplication */
+ code FAR *next; /* next available space in table */
+ const unsigned short FAR *base; /* base value table to use */
+ const unsigned short FAR *extra; /* extra bits table to use */
+ unsigned match; /* use base and extra for symbol >= match */
+ unsigned short count[MAXBITS+1]; /* number of codes of each length */
+ unsigned short offs[MAXBITS+1]; /* offsets in table for each length */
+ static const unsigned short lbase[31] = { /* Length codes 257..285 base */
3, 4, 5, 6, 7, 8, 9, 10, 11, 13, 15, 17, 19, 23, 27, 31,
35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258, 0, 0};
- /* see note #13 above about 258 */
-local const uInt cplext[31] = { /* Extra bits for literal codes 257..285 */
- 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 2, 2, 2, 2,
- 3, 3, 3, 3, 4, 4, 4, 4, 5, 5, 5, 5, 0, 112, 112}; /* 112==invalid */
-local const uInt cpdist[30] = { /* Copy offsets for distance codes 0..29 */
+ static const unsigned short lext[31] = { /* Length codes 257..285 extra */
+ 16, 16, 16, 16, 16, 16, 16, 16, 17, 17, 17, 17, 18, 18, 18, 18,
+ 19, 19, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 16, 77, 202};
+ static const unsigned short dbase[32] = { /* Distance codes 0..29 base */
1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193,
257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145,
- 8193, 12289, 16385, 24577};
-local const uInt cpdext[30] = { /* Extra bits for distance codes */
- 0, 0, 0, 0, 1, 1, 2, 2, 3, 3, 4, 4, 5, 5, 6, 6,
- 7, 7, 8, 8, 9, 9, 10, 10, 11, 11,
- 12, 12, 13, 13};
-
-/*
- Huffman code decoding is performed using a multi-level table lookup.
- The fastest way to decode is to simply build a lookup table whose
- size is determined by the longest code. However, the time it takes
- to build this table can also be a factor if the data being decoded
- is not very long. The most common codes are necessarily the
- shortest codes, so those codes dominate the decoding time, and hence
- the speed. The idea is you can have a shorter table that decodes the
- shorter, more probable codes, and then point to subsidiary tables for
- the longer codes. The time it costs to decode the longer codes is
- then traded against the time it takes to make longer tables.
-
- This results of this trade are in the variables lbits and dbits
- below. lbits is the number of bits the first level table for literal/
- length codes can decode in one step, and dbits is the same thing for
- the distance codes. Subsequent tables are also less than or equal to
- those sizes. These values may be adjusted either when all of the
- codes are shorter than that, in which case the longest code length in
- bits is used, or when the shortest code is *longer* than the requested
- table size, in which case the length of the shortest code in bits is
- used.
-
- There are two different values for the two tables, since they code a
- different number of possibilities each. The literal/length table
- codes 286 possible values, or in a flat code, a little over eight
- bits. The distance table codes 30 possible values, or a little less
- than five bits, flat. The optimum values for speed end up being
- about one bit more than those, so lbits is 8+1 and dbits is 5+1.
- The optimum values may differ though from machine to machine, and
- possibly even between compilers. Your mileage may vary.
- */
-
-
-/* If BMAX needs to be larger than 16, then h and x[] should be uLong. */
-#define BMAX 15 /* maximum bit length of any code */
-
-local int huft_build( /* b, n, s, d, e, t, m, hp, hn, v) */
-uIntf *b, /* code lengths in bits (all assumed <= BMAX) */
-uInt n, /* number of codes (assumed <= 288) */
-uInt s, /* number of simple-valued codes (0..s-1) */
-const uIntf *d, /* list of base values for non-simple codes */
-const uIntf *e, /* list of extra bits for non-simple codes */
-inflate_huft * FAR *t, /* result: starting table */
-uIntf *m, /* maximum lookup bits, returns actual */
-inflate_huft *hp, /* space for trees */
-uInt *hn, /* hufts used in space */
-uIntf *v /* working area: values in order of bit length */
-/* Given a list of code lengths and a maximum table size, make a set of
- tables to decode that set of codes. Return Z_OK on success, Z_BUF_ERROR
- if the given code set is incomplete (the tables are still built in this
- case), or Z_DATA_ERROR if the input is invalid. */
-)
-{
+ 8193, 12289, 16385, 24577, 0, 0};
+ static const unsigned short dext[32] = { /* Distance codes 0..29 extra */
+ 16, 16, 16, 16, 17, 17, 18, 18, 19, 19, 20, 20, 21, 21, 22, 22,
+ 23, 23, 24, 24, 25, 25, 26, 26, 27, 27,
+ 28, 28, 29, 29, 64, 64};
+
+ /*
+ Process a set of code lengths to create a canonical Huffman code. The
+ code lengths are lens[0..codes-1]. Each length corresponds to the
+ symbols 0..codes-1. The Huffman code is generated by first sorting the
+ symbols by length from short to long, and retaining the symbol order
+ for codes with equal lengths. Then the code starts with all zero bits
+ for the first code of the shortest length, and the codes are integer
+ increments for the same length, and zeros are appended as the length
+ increases. For the deflate format, these bits are stored backwards
+ from their more natural integer increment ordering, and so when the
+ decoding tables are built in the large loop below, the integer codes
+ are incremented backwards.
+
+ This routine assumes, but does not check, that all of the entries in
+ lens[] are in the range 0..MAXBITS. The caller must assure this.
+ 1..MAXBITS is interpreted as that code length. zero means that that
+ symbol does not occur in this code.
+
+ The codes are sorted by computing a count of codes for each length,
+ creating from that a table of starting indices for each length in the
+ sorted table, and then entering the symbols in order in the sorted
+ table. The sorted table is work[], with that space being provided by
+ the caller.
+
+ The length counts are used for other purposes as well, i.e. finding
+ the minimum and maximum length codes, determining if there are any
+ codes at all, checking for a valid set of lengths, and looking ahead
+ at length counts to determine sub-table sizes when building the
+ decoding tables.
+ */
+
+ /* accumulate lengths for codes (assumes lens[] all in 0..MAXBITS) */
+ for (len = 0; len <= MAXBITS; len++)
+ count[len] = 0;
+ for (sym = 0; sym < codes; sym++)
+ count[lens[sym]]++;
+
+ /* bound code lengths, force root to be within code lengths */
+ root = *bits;
+ for (max = MAXBITS; max >= 1; max--)
+ if (count[max] != 0) break;
+ if (root > max) root = max;
+ if (max == 0) { /* no symbols to code at all */
+ here.op = (unsigned char)64; /* invalid code marker */
+ here.bits = (unsigned char)1;
+ here.val = (unsigned short)0;
+ *(*table)++ = here; /* make a table to force an error */
+ *(*table)++ = here;
+ *bits = 1;
+ return 0; /* no symbols, but wait for decoding to report error */
+ }
+ for (min = 1; min < max; min++)
+ if (count[min] != 0) break;
+ if (root < min) root = min;
+
+ /* check for an over-subscribed or incomplete set of lengths */
+ left = 1;
+ for (len = 1; len <= MAXBITS; len++) {
+ left <<= 1;
+ left -= count[len];
+ if (left < 0) return -1; /* over-subscribed */
+ }
+ if (left > 0 && (type == CODES || max != 1))
+ return -1; /* incomplete set */
+
+ /* generate offsets into symbol table for each length for sorting */
+ offs[1] = 0;
+ for (len = 1; len < MAXBITS; len++)
+ offs[len + 1] = offs[len] + count[len];
+
+ /* sort symbols by length, by symbol order within each length */
+ for (sym = 0; sym < codes; sym++)
+ if (lens[sym] != 0) work[offs[lens[sym]]++] = (unsigned short)sym;
+
+ /*
+ Create and fill in decoding tables. In this loop, the table being
+ filled is at next and has curr index bits. The code being used is huff
+ with length len. That code is converted to an index by dropping drop
+ bits off of the bottom. For codes where len is less than drop + curr,
+ those top drop + curr - len bits are incremented through all values to
+ fill the table with replicated entries.
+
+ root is the number of index bits for the root table. When len exceeds
+ root, sub-tables are created pointed to by the root entry with an index
+ of the low root bits of huff. This is saved in low to check for when a
+ new sub-table should be started. drop is zero when the root table is
+ being filled, and drop is root when sub-tables are being filled.
+
+ When a new sub-table is needed, it is necessary to look ahead in the
+ code lengths to determine what size sub-table is needed. The length
+ counts are used for this, and so count[] is decremented as codes are
+ entered in the tables.
+
+ used keeps track of how many table entries have been allocated from the
+ provided *table space. It is checked for LENS and DIST tables against
+ the constants ENOUGH_LENS and ENOUGH_DISTS to guard against changes in
+ the initial root table size constants. See the comments in inftrees.h
+ for more information.
+
+ sym increments through all symbols, and the loop terminates when
+ all codes of length max, i.e. all codes, have been processed. This
+ routine permits incomplete codes, so another loop after this one fills
+ in the rest of the decoding tables with invalid code markers.
+ */
+
+ /* set up for code type */
+ switch (type) {
+ case CODES:
+ base = extra = work; /* dummy value--not used */
+ match = 20;
+ break;
+ case LENS:
+ base = lbase;
+ extra = lext;
+ match = 257;
+ break;
+ default: /* DISTS */
+ base = dbase;
+ extra = dext;
+ match = 0;
+ }
- uInt a; /* counter for codes of length k */
- uInt c[BMAX+1]; /* bit length count table */
- uInt f; /* i repeats in table every f entries */
- int g; /* maximum code length */
- int h; /* table level */
- uInt i; /* counter, current code */
- uInt j; /* counter */
- int k; /* number of bits in current code */
- int l; /* bits per table (returned in m) */
- uInt mask; /* (1 << w) - 1, to avoid cc -O bug on HP */
- uIntf *p; /* pointer into c[], b[], or v[] */
- inflate_huft *q; /* points to current table */
- struct inflate_huft_s r; /* table entry for structure assignment */
- inflate_huft *u[BMAX]; /* table stack */
- int w; /* bits before this table == (l * h) */
- uInt x[BMAX+1]; /* bit offsets, then code stack */
- uIntf *xp; /* pointer into x */
- int y; /* number of dummy codes added */
- uInt z; /* number of entries in current table */
-
-
- /* Make compiler happy */
- r.base = 0;
-
- /* Generate counts for each bit length */
- p = c;
-#define C0 *p++ = 0;
-#define C2 C0 C0 C0 C0
-#define C4 C2 C2 C2 C2
- C4 /* clear c[]--assume BMAX+1 is 16 */
- p = b; i = n;
- do {
- c[*p++]++; /* assume all entries <= BMAX */
- } while (--i);
- if (c[0] == n) /* null input--all zero length codes */
- {
- *t = (inflate_huft *)Z_NULL;
- *m = 0;
- return Z_OK;
- }
-
-
- /* Find minimum and maximum length, bound *m by those */
- l = *m;
- for (j = 1; j <= BMAX; j++)
- if (c[j])
- break;
- k = j; /* minimum code length */
- if ((uInt)l < j)
- l = j;
- for (i = BMAX; i; i--)
- if (c[i])
- break;
- g = i; /* maximum code length */
- if ((uInt)l > i)
- l = i;
- *m = l;
-
-
- /* Adjust last length count to fill out codes, if needed */
- for (y = 1 << j; j < i; j++, y <<= 1)
- if ((y -= c[j]) < 0)
- return Z_DATA_ERROR;
- if ((y -= c[i]) < 0)
- return Z_DATA_ERROR;
- c[i] += y;
-
-
- /* Generate starting offsets into the value table for each length */
- x[1] = j = 0;
- p = c + 1; xp = x + 2;
- while (--i) { /* note that i == g from above */
- *xp++ = (j += *p++);
- }
-
-
- /* Make a table of values in order of bit lengths */
- p = b; i = 0;
- do {
- if ((j = *p++) != 0)
- v[x[j]++] = i;
- } while (++i < n);
- n = x[g]; /* set n to length of v */
-
-
- /* Generate the Huffman codes and for each, make the table entries */
- x[0] = i = 0; /* first Huffman code is zero */
- p = v; /* grab values in bit order */
- h = -1; /* no tables yet--level -1 */
- w = -l; /* bits decoded == (l * h) */
- u[0] = (inflate_huft *)Z_NULL; /* just to keep compilers happy */
- q = (inflate_huft *)Z_NULL; /* ditto */
- z = 0; /* ditto */
-
- /* go through the bit lengths (k already is bits in shortest code) */
- for (; k <= g; k++)
- {
- a = c[k];
- while (a--)
- {
- /* here i is the Huffman code of length k bits for value *p */
- /* make tables up to required level */
- while (k > w + l)
- {
- h++;
- w += l; /* previous table always l bits */
-
- /* compute minimum size table less than or equal to l bits */
- z = g - w;
- z = z > (uInt)l ? (uInt)l : z; /* table size upper limit */
- if ((f = 1 << (j = k - w)) > a + 1) /* try a k-w bit table */
- { /* too few codes for k-w bit table */
- f -= a + 1; /* deduct codes from patterns left */
- xp = c + k;
- if (j < z)
- while (++j < z) /* try smaller tables up to z bits */
- {
- if ((f <<= 1) <= *++xp)
- break; /* enough codes to use up j bits */
- f -= *xp; /* else deduct codes from patterns */
- }
+ /* initialize state for loop */
+ huff = 0; /* starting code */
+ sym = 0; /* starting code symbol */
+ len = min; /* starting code length */
+ next = *table; /* current table to fill in */
+ curr = root; /* current table index bits */
+ drop = 0; /* current bits to drop from code for index */
+ low = (unsigned)(-1); /* trigger new sub-table when len > root */
+ used = 1U << root; /* use root table entries */
+ mask = used - 1; /* mask for comparing low */
+
+ /* check available table space */
+ if ((type == LENS && used > ENOUGH_LENS) ||
+ (type == DISTS && used > ENOUGH_DISTS))
+ return 1;
+
+ /* process all codes and make table entries */
+ for (;;) {
+ /* create table entry */
+ here.bits = (unsigned char)(len - drop);
+ if (work[sym] + 1U < match) {
+ here.op = (unsigned char)0;
+ here.val = work[sym];
}
- z = 1 << j; /* table entries for j-bit table */
-
- /* allocate new table */
- if (*hn + z > MANY) /* (note: doesn't matter for fixed) */
- return Z_DATA_ERROR; /* overflow of MANY */
- u[h] = q = hp + *hn;
- *hn += z;
-
- /* connect to last table, if there is one */
- if (h)
- {
- x[h] = i; /* save pattern for backing up */
- r.bits = (Byte)l; /* bits to dump before this table */
- r.exop = (Byte)j; /* bits in this table */
- j = i >> (w - l);
- r.base = (uInt)(q - u[h-1] - j); /* offset to this table */
- u[h-1][j] = r; /* connect to last table */
+ else if (work[sym] >= match) {
+ here.op = (unsigned char)(extra[work[sym] - match]);
+ here.val = base[work[sym] - match];
+ }
+ else {
+ here.op = (unsigned char)(32 + 64); /* end of block */
+ here.val = 0;
}
- else
- *t = q; /* first table is returned result */
- }
-
- /* set up table entry in r */
- r.bits = (Byte)(k - w);
- if (p >= v + n)
- r.exop = 128 + 64; /* out of values--invalid code */
- else if (*p < s)
- {
- r.exop = (Byte)(*p < 256 ? 0 : 32 + 64); /* 256 is end-of-block */
- r.base = *p++; /* simple code is just the value */
- }
- else
- {
- r.exop = (Byte)(e[*p - s] + 16 + 64);/* non-simple--look up in lists */
- r.base = d[*p++ - s];
- }
-
- /* fill code-like entries with r */
- f = 1 << (k - w);
- for (j = i >> w; j < z; j += f)
- q[j] = r;
-
- /* backwards increment the k-bit code i */
- for (j = 1 << (k - 1); i & j; j >>= 1)
- i ^= j;
- i ^= j;
-
- /* backup over finished tables */
- mask = (1 << w) - 1; /* needed on HP, cc -O bug */
- while ((i & mask) != x[h])
- {
- h--; /* don't need to update q */
- w -= l;
- mask = (1 << w) - 1;
- }
- }
- }
-
-
- /* Return Z_BUF_ERROR if we were given an incomplete table */
- return y != 0 && g != 1 ? Z_BUF_ERROR : Z_OK;
-}
+ /* replicate for those indices with low len bits equal to huff */
+ incr = 1U << (len - drop);
+ fill = 1U << curr;
+ min = fill; /* save offset to next table */
+ do {
+ fill -= incr;
+ next[(huff >> drop) + fill] = here;
+ } while (fill != 0);
+
+ /* backwards increment the len-bit code huff */
+ incr = 1U << (len - 1);
+ while (huff & incr)
+ incr >>= 1;
+ if (incr != 0) {
+ huff &= incr - 1;
+ huff += incr;
+ }
+ else
+ huff = 0;
-local int inflate_trees_bits( /* c, bb, tb, hp, z) */
-uIntf *c, /* 19 code lengths */
-uIntf *bb, /* bits tree desired/actual depth */
-inflate_huft * FAR *tb, /* bits tree result */
-inflate_huft *hp, /* space for trees */
-z_streamp z /* for messages */
-)
-{
- int r;
- uInt hn = 0; /* hufts used in space */
- uIntf *v; /* work area for huft_build */
-
- if ((v = (uIntf*)ZALLOC(z, 19, sizeof(uInt))) == Z_NULL)
- return Z_MEM_ERROR;
- r = huft_build(c, 19, 19, (uIntf*)Z_NULL, (uIntf*)Z_NULL,
- tb, bb, hp, &hn, v);
- if (r == Z_DATA_ERROR)
- z->msg = (char*)"oversubscribed dynamic bit lengths tree";
- else if (r == Z_BUF_ERROR || *bb == 0)
- {
- z->msg = (char*)"incomplete dynamic bit lengths tree";
- r = Z_DATA_ERROR;
- }
- ZFREE(z, v);
- return r;
-}
+ /* go to next symbol, update count, len */
+ sym++;
+ if (--(count[len]) == 0) {
+ if (len == max) break;
+ len = lens[work[sym]];
+ }
+ /* create new sub-table if needed */
+ if (len > root && (huff & mask) != low) {
+ /* if first time, transition to sub-tables */
+ if (drop == 0)
+ drop = root;
+
+ /* increment past last table */
+ next += min; /* here min is 1 << curr */
+
+ /* determine length of next table */
+ curr = len - drop;
+ left = (int)(1 << curr);
+ while (curr + drop < max) {
+ left -= count[curr + drop];
+ if (left <= 0) break;
+ curr++;
+ left <<= 1;
+ }
-local int inflate_trees_dynamic( /* nl, nd, c, bl, bd, tl, td, hp, z) */
-uInt nl, /* number of literal/length codes */
-uInt nd, /* number of distance codes */
-uIntf *c, /* that many (total) code lengths */
-uIntf *bl, /* literal desired/actual bit depth */
-uIntf *bd, /* distance desired/actual bit depth */
-inflate_huft * FAR *tl, /* literal/length tree result */
-inflate_huft * FAR *td, /* distance tree result */
-inflate_huft *hp, /* space for trees */
-z_streamp z /* for messages */
-)
-{
- int r;
- uInt hn = 0; /* hufts used in space */
- uIntf *v; /* work area for huft_build */
-
- /* allocate work area */
- if ((v = (uIntf*)ZALLOC(z, 288, sizeof(uInt))) == Z_NULL)
- return Z_MEM_ERROR;
-
- /* build literal/length tree */
- r = huft_build(c, nl, 257, cplens, cplext, tl, bl, hp, &hn, v);
- if (r != Z_OK || *bl == 0)
- {
- if (r == Z_DATA_ERROR)
- z->msg = (char*)"oversubscribed literal/length tree";
- else if (r != Z_MEM_ERROR)
- {
- z->msg = (char*)"incomplete literal/length tree";
- r = Z_DATA_ERROR;
- }
- ZFREE(z, v);
- return r;
- }
-
- /* build distance tree */
- r = huft_build(c + nl, nd, 0, cpdist, cpdext, td, bd, hp, &hn, v);
- if (r != Z_OK || (*bd == 0 && nl > 257))
- {
- if (r == Z_DATA_ERROR)
- z->msg = (char*)"oversubscribed distance tree";
- else if (r == Z_BUF_ERROR) {
-#if 0
- {
-#endif
-#ifdef PKZIP_BUG_WORKAROUND
- r = Z_OK;
- }
-#else
- z->msg = (char*)"incomplete distance tree";
- r = Z_DATA_ERROR;
- }
- else if (r != Z_MEM_ERROR)
- {
- z->msg = (char*)"empty distance tree with lengths";
- r = Z_DATA_ERROR;
+ /* check for enough space */
+ used += 1U << curr;
+ if ((type == LENS && used > ENOUGH_LENS) ||
+ (type == DISTS && used > ENOUGH_DISTS))
+ return 1;
+
+ /* point entry in root table to sub-table */
+ low = huff & mask;
+ (*table)[low].op = (unsigned char)curr;
+ (*table)[low].bits = (unsigned char)root;
+ (*table)[low].val = (unsigned short)(next - *table);
+ }
}
- ZFREE(z, v);
- return r;
-#endif
- }
-
- /* done */
- ZFREE(z, v);
- return Z_OK;
-}
-
-/* build fixed tables only once--keep them here */
-#ifdef BUILDFIXED
-local int fixed_built = 0;
-#define FIXEDH 544 /* number of hufts used by fixed tables */
-local inflate_huft fixed_mem[FIXEDH];
-local uInt fixed_bl;
-local uInt fixed_bd;
-local inflate_huft *fixed_tl;
-local inflate_huft *fixed_td;
-#else
-#include "inffixed.h"
-#endif
-
-
-local int inflate_trees_fixed( /* bl, bd, tl, td, z) */
-uIntf *bl, /* literal desired/actual bit depth */
-uIntf *bd, /* distance desired/actual bit depth */
-const inflate_huft * FAR *tl, /* literal/length tree result */
-const inflate_huft * FAR *td, /* distance tree result */
-z_streamp z /* for memory allocation */
-)
-{
-#ifdef BUILDFIXED
- /* build fixed tables if not already */
- if (!fixed_built)
- {
- int k; /* temporary variable */
- uInt f = 0; /* number of hufts used in fixed_mem */
- uIntf *c; /* length list for huft_build */
- uIntf *v; /* work area for huft_build */
-
- /* allocate memory */
- if ((c = (uIntf*)ZALLOC(z, 288, sizeof(uInt))) == Z_NULL)
- return Z_MEM_ERROR;
- if ((v = (uIntf*)ZALLOC(z, 288, sizeof(uInt))) == Z_NULL)
- {
- ZFREE(z, c);
- return Z_MEM_ERROR;
+ /* fill in remaining table entry if code is incomplete (guaranteed to have
+ at most one remaining entry, since if the code is incomplete, the
+ maximum code length that was allowed to get this far is one bit) */
+ if (huff != 0) {
+ here.op = (unsigned char)64; /* invalid code marker */
+ here.bits = (unsigned char)(len - drop);
+ here.val = (unsigned short)0;
+ next[huff] = here;
}
- /* literal table */
- for (k = 0; k < 144; k++)
- c[k] = 8;
- for (; k < 256; k++)
- c[k] = 9;
- for (; k < 280; k++)
- c[k] = 7;
- for (; k < 288; k++)
- c[k] = 8;
- fixed_bl = 9;
- huft_build(c, 288, 257, cplens, cplext, &fixed_tl, &fixed_bl,
- fixed_mem, &f, v);
-
- /* distance table */
- for (k = 0; k < 30; k++)
- c[k] = 5;
- fixed_bd = 5;
- huft_build(c, 30, 0, cpdist, cpdext, &fixed_td, &fixed_bd,
- fixed_mem, &f, v);
-
- /* done */
- ZFREE(z, v);
- ZFREE(z, c);
- fixed_built = 1;
- }
-#else
- FT_UNUSED(z);
-#endif
- *bl = fixed_bl;
- *bd = fixed_bd;
- *tl = fixed_tl;
- *td = fixed_td;
- return Z_OK;
+ /* set return parameters */
+ *table += used;
+ *bits = root;
+ return 0;
}
diff --git a/src/gzip/inftrees.h b/src/gzip/inftrees.h
index 07bf2aa..c94eb78 100644
--- a/src/gzip/inftrees.h
+++ b/src/gzip/inftrees.h
@@ -1,63 +1,67 @@
/* inftrees.h -- header to use inftrees.c
- * Copyright (C) 1995-2002 Mark Adler
+ * Copyright (C) 1995-2005, 2010 Mark Adler
* For conditions of distribution and use, see copyright notice in zlib.h
*/
+#ifndef INFTREES_H
+#define INFTREES_H
+
/* WARNING: this file should *not* be used by applications. It is
part of the implementation of the compression library and is
subject to change. Applications should only use zlib.h.
*/
-/* Huffman code lookup table entry--this entry is four bytes for machines
- that have 16-bit pointers (e.g. PC's in the small or medium model). */
-
-#ifndef _INFTREES_H
-#define _INFTREES_H
-
-typedef struct inflate_huft_s FAR inflate_huft;
-
-struct inflate_huft_s {
- union {
- struct {
- Byte Exop; /* number of extra bits or operation */
- Byte Bits; /* number of bits in this code or subcode */
- } what;
- uInt pad; /* pad structure to a power of 2 (4 bytes for */
- } word; /* 16-bit, 8 bytes for 32-bit int's) */
- uInt base; /* literal, length base, distance base,
- or table offset */
-};
-
-/* Maximum size of dynamic tree. The maximum found in a long but non-
- exhaustive search was 1004 huft structures (850 for length/literals
- and 154 for distances, the latter actually the result of an
- exhaustive search). The actual maximum is not known, but the
- value below is more than safe. */
-#define MANY 1440
-
-local int inflate_trees_bits OF((
- uIntf *, /* 19 code lengths */
- uIntf *, /* bits tree desired/actual depth */
- inflate_huft * FAR *, /* bits tree result */
- inflate_huft *, /* space for trees */
- z_streamp)); /* for messages */
-
-local int inflate_trees_dynamic OF((
- uInt, /* number of literal/length codes */
- uInt, /* number of distance codes */
- uIntf *, /* that many (total) code lengths */
- uIntf *, /* literal desired/actual bit depth */
- uIntf *, /* distance desired/actual bit depth */
- inflate_huft * FAR *, /* literal/length tree result */
- inflate_huft * FAR *, /* distance tree result */
- inflate_huft *, /* space for trees */
- z_streamp)); /* for messages */
-
-local int inflate_trees_fixed OF((
- uIntf *, /* literal desired/actual bit depth */
- uIntf *, /* distance desired/actual bit depth */
- const inflate_huft * FAR *, /* literal/length tree result */
- const inflate_huft * FAR *, /* distance tree result */
- z_streamp)); /* for memory allocation */
-
-#endif /* _INFTREES_H */
+/* Structure for decoding tables. Each entry provides either the
+ information needed to do the operation requested by the code that
+ indexed that table entry, or it provides a pointer to another
+ table that indexes more bits of the code. op indicates whether
+ the entry is a pointer to another table, a literal, a length or
+ distance, an end-of-block, or an invalid code. For a table
+ pointer, the low four bits of op is the number of index bits of
+ that table. For a length or distance, the low four bits of op
+ is the number of extra bits to get after the code. bits is
+ the number of bits in this code or part of the code to drop off
+ of the bit buffer. val is the actual byte to output in the case
+ of a literal, the base length or distance, or the offset from
+ the current table to the next table. Each entry is four bytes. */
+typedef struct {
+ unsigned char op; /* operation, extra bits, table bits */
+ unsigned char bits; /* bits in this part of the code */
+ unsigned short val; /* offset in table or code value */
+} code;
+
+/* op values as set by inflate_table():
+ 00000000 - literal
+ 0000tttt - table link, tttt != 0 is the number of table index bits
+ 0001eeee - length or distance, eeee is the number of extra bits
+ 01100000 - end of block
+ 01000000 - invalid code
+ */
+
+/* Maximum size of the dynamic table. The maximum number of code structures is
+ 1444, which is the sum of 852 for literal/length codes and 592 for distance
+ codes. These values were found by exhaustive searches using the program
+ examples/enough.c found in the zlib distribtution. The arguments to that
+ program are the number of symbols, the initial root table size, and the
+ maximum bit length of a code. "enough 286 9 15" for literal/length codes
+ returns returns 852, and "enough 30 6 15" for distance codes returns 592.
+ The initial root table size (9 or 6) is found in the fifth argument of the
+ inflate_table() calls in inflate.c and infback.c. If the root table size is
+ changed, then these maximum sizes would be need to be recalculated and
+ updated. */
+#define ENOUGH_LENS 852
+#define ENOUGH_DISTS 592
+#define ENOUGH (ENOUGH_LENS+ENOUGH_DISTS)
+
+/* Type of code to build for inflate_table() */
+typedef enum {
+ CODES,
+ LENS,
+ DISTS
+} codetype;
+
+int ZLIB_INTERNAL inflate_table OF((codetype type, unsigned short FAR *lens,
+ unsigned codes, code FAR * FAR *table,
+ unsigned FAR *bits, unsigned short FAR *work));
+
+#endif /* INFTREES_H_ */
diff --git a/src/gzip/infutil.c b/src/gzip/infutil.c
deleted file mode 100644
index 6087b40..0000000
--- a/src/gzip/infutil.c
+++ /dev/null
@@ -1,86 +0,0 @@
-/* inflate_util.c -- data and routines common to blocks and codes
- * Copyright (C) 1995-2002 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-#include "zutil.h"
-#include "infblock.h"
-#include "inftrees.h"
-#include "infcodes.h"
-#include "infutil.h"
-
-
-/* And'ing with mask[n] masks the lower n bits */
-local const uInt inflate_mask[17] = {
- 0x0000,
- 0x0001, 0x0003, 0x0007, 0x000f, 0x001f, 0x003f, 0x007f, 0x00ff,
- 0x01ff, 0x03ff, 0x07ff, 0x0fff, 0x1fff, 0x3fff, 0x7fff, 0xffff
-};
-
-
-/* copy as much as possible from the sliding window to the output area */
-local int inflate_flush( /* s, z, r) */
-inflate_blocks_statef *s,
-z_streamp z,
-int r )
-{
- uInt n;
- Bytef *p;
- Bytef *q;
-
- /* local copies of source and destination pointers */
- p = z->next_out;
- q = s->read;
-
- /* compute number of bytes to copy as far as end of window */
- n = (uInt)((q <= s->write ? s->write : s->end) - q);
- if (n > z->avail_out) n = z->avail_out;
- if (n && r == Z_BUF_ERROR) r = Z_OK;
-
- /* update counters */
- z->avail_out -= n;
- z->total_out += n;
-
- /* update check information */
- if (s->checkfn != Z_NULL)
- z->adler = s->check = (*s->checkfn)(s->check, q, n);
-
- /* copy as far as end of window */
- zmemcpy(p, q, n);
- p += n;
- q += n;
-
- /* see if more to copy at beginning of window */
- if (q == s->end)
- {
- /* wrap pointers */
- q = s->window;
- if (s->write == s->end)
- s->write = s->window;
-
- /* compute bytes to copy */
- n = (uInt)(s->write - q);
- if (n > z->avail_out) n = z->avail_out;
- if (n && r == Z_BUF_ERROR) r = Z_OK;
-
- /* update counters */
- z->avail_out -= n;
- z->total_out += n;
-
- /* update check information */
- if (s->checkfn != Z_NULL)
- z->adler = s->check = (*s->checkfn)(s->check, q, n);
-
- /* copy */
- zmemcpy(p, q, n);
- p += n;
- q += n;
- }
-
- /* update pointers */
- z->next_out = p;
- s->read = q;
-
- /* done */
- return r;
-}
diff --git a/src/gzip/infutil.h b/src/gzip/infutil.h
deleted file mode 100644
index cdf18b4..0000000
--- a/src/gzip/infutil.h
+++ /dev/null
@@ -1,98 +0,0 @@
-/* infutil.h -- types and macros common to blocks and codes
- * Copyright (C) 1995-2002 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* WARNING: this file should *not* be used by applications. It is
- part of the implementation of the compression library and is
- subject to change. Applications should only use zlib.h.
- */
-
-#ifndef _INFUTIL_H
-#define _INFUTIL_H
-
-typedef enum {
- TYPE, /* get type bits (3, including end bit) */
- LENS, /* get lengths for stored */
- STORED, /* processing stored block */
- TABLE, /* get table lengths */
- BTREE, /* get bit lengths tree for a dynamic block */
- DTREE, /* get length, distance trees for a dynamic block */
- CODES, /* processing fixed or dynamic block */
- DRY, /* output remaining window bytes */
- DONE, /* finished last block, done */
- BAD} /* got a data error--stuck here */
-inflate_block_mode;
-
-/* inflate blocks semi-private state */
-struct inflate_blocks_state {
-
- /* mode */
- inflate_block_mode mode; /* current inflate_block mode */
-
- /* mode dependent information */
- union {
- uInt left; /* if STORED, bytes left to copy */
- struct {
- uInt table; /* table lengths (14 bits) */
- uInt index; /* index into blens (or border) */
- uIntf *blens; /* bit lengths of codes */
- uInt bb; /* bit length tree depth */
- inflate_huft *tb; /* bit length decoding tree */
- } trees; /* if DTREE, decoding info for trees */
- struct {
- inflate_codes_statef
- *codes;
- } decode; /* if CODES, current state */
- } sub; /* submode */
- uInt last; /* true if this block is the last block */
-
- /* mode independent information */
- uInt bitk; /* bits in bit buffer */
- uLong bitb; /* bit buffer */
- inflate_huft *hufts; /* single malloc for tree space */
- Bytef *window; /* sliding window */
- Bytef *end; /* one byte after sliding window */
- Bytef *read; /* window read pointer */
- Bytef *write; /* window write pointer */
- check_func checkfn; /* check function */
- uLong check; /* check on output */
-
-};
-
-
-/* defines for inflate input/output */
-/* update pointers and return */
-#define UPDBITS {s->bitb=b;s->bitk=k;}
-#define UPDIN {z->avail_in=n;z->total_in+=p-z->next_in;z->next_in=p;}
-#define UPDOUT {s->write=q;}
-#define UPDATE {UPDBITS UPDIN UPDOUT}
-#define LEAVE {UPDATE return inflate_flush(s,z,r);}
-/* get bytes and bits */
-#define LOADIN {p=z->next_in;n=z->avail_in;b=s->bitb;k=s->bitk;}
-#define NEEDBYTE {if(n)r=Z_OK;else LEAVE}
-#define NEXTBYTE (n--,*p++)
-#define NEEDBITS(j) {while(k<(j)){NEEDBYTE;b|=((uLong)NEXTBYTE)<<k;k+=8;}}
-#define DUMPBITS(j) {b>>=(j);k-=(j);}
-/* output bytes */
-#define WAVAIL (uInt)(q<s->read?s->read-q-1:s->end-q)
-#define LOADOUT {q=s->write;m=(uInt)WAVAIL;}
-#define WRAP {if(q==s->end&&s->read!=s->window){q=s->window;m=(uInt)WAVAIL;}}
-#define FLUSH {UPDOUT r=inflate_flush(s,z,r); LOADOUT}
-#define NEEDOUT {if(m==0){WRAP if(m==0){FLUSH WRAP if(m==0) LEAVE}}r=Z_OK;}
-#define OUTBYTE(a) {*q++=(Byte)(a);m--;}
-/* load local pointers */
-#define LOAD {LOADIN LOADOUT}
-
-/* masks for lower bits (size given to avoid silly warnings with Visual C++) */
-#ifndef NO_INFLATE_MASK
-local const uInt inflate_mask[17];
-#endif
-
-/* copy as much as possible from the sliding window to the output area */
-local int inflate_flush OF((
- inflate_blocks_statef *,
- z_streamp ,
- int));
-
-#endif
diff --git a/src/gzip/patches/0001-zlib-Fix-zlib-sources-to-compile-for-FreeType.patch b/src/gzip/patches/0001-zlib-Fix-zlib-sources-to-compile-for-FreeType.patch
new file mode 100644
index 0000000..385baa7
--- /dev/null
+++ b/src/gzip/patches/0001-zlib-Fix-zlib-sources-to-compile-for-FreeType.patch
@@ -0,0 +1,419 @@
+From 2977ff0df909f939517e9857943938ff84201a26 Mon Sep 17 00:00:00 2001
+From: David Turner <david@freetype.org>
+Date: Wed, 18 Aug 2021 00:17:35 +0200
+Subject: [zlib] Fix zlib sources to compile for FreeType
+
+Fix misc zlib sources to ensure that they do not issue compiler
+warnings when they are compiled as part of src/gzip/ftgzip.c.
+
+* src/gzip/adler32.c: Do not define unused functions when Z_FREETYPE
+ is set.
+
+* src/gzip/crc32.c: Undefined DO1 and DO8 macros that are already
+ defined in adler32.c.
+
+* src/gzip/gzguts.h: Rename COPY macro to COPY__ since COPY and
+ COPY_ conflict with enum values with the same name in
+ zlib.h.
+
+* src/gzip/inflate.c, src/gzip/adler32.c: Omit unused function
+ declarations when Z_FREETYPE is defined.
+
+* src/gzip/zlib.h: Include "ftzconf.h" instead of "zconf.h" to
+ avoid conflicts with system-installed headers. Omit unused
+ function declarations when Z_FREETYPE is defined.
+
+* src/gzip/zutil.h: Use ft_memxxx() functions instead of memxxx().
+ Omit unused function declarations when Z_FREETYPE is defined.
+
+* src/gzip/inflate.h, src/gzip/inftrees.h: Add header guard macros
+ to prevent compiler errors.
+---
+ src/gzip/adler32.c | 6 ++++++
+ src/gzip/crc32.c | 2 ++
+ src/gzip/gzguts.h | 2 +-
+ src/gzip/inflate.c | 18 ++++++++++++++++++
+ src/gzip/inflate.h | 5 +++++
+ src/gzip/inftrees.h | 5 +++++
+ src/gzip/zlib.h | 39 ++++++++++++++++++++++++++++++++++++---
+ src/gzip/zutil.h | 10 +++++++---
+ 8 files changed, 80 insertions(+), 7 deletions(-)
+
+diff --git a/src/gzip/adler32.c b/src/gzip/adler32.c
+index d0be4380a..a8242ba13 100644
+--- a/src/gzip/adler32.c
++++ b/src/gzip/adler32.c
+@@ -7,7 +7,9 @@
+
+ #include "zutil.h"
+
++#ifndef Z_FREETYPE
+ local uLong adler32_combine_ OF((uLong adler1, uLong adler2, z_off64_t len2));
++#endif
+
+ #define BASE 65521U /* largest prime smaller than 65536 */
+ #define NMAX 5552
+@@ -139,6 +141,8 @@ uLong ZEXPORT adler32(adler, buf, len)
+ return adler32_z(adler, buf, len);
+ }
+
++#ifndef Z_FREETYPE
++
+ /* ========================================================================= */
+ local uLong adler32_combine_(adler1, adler2, len2)
+ uLong adler1;
+@@ -184,3 +188,5 @@ uLong ZEXPORT adler32_combine64(adler1, adler2, len2)
+ {
+ return adler32_combine_(adler1, adler2, len2);
+ }
++
++#endif /* !Z_FREETYPE */
+diff --git a/src/gzip/crc32.c b/src/gzip/crc32.c
+index 9580440c0..d67663a4e 100644
+--- a/src/gzip/crc32.c
++++ b/src/gzip/crc32.c
+@@ -195,6 +195,8 @@ const z_crc_t FAR * ZEXPORT get_crc_table()
+ }
+
+ /* ========================================================================= */
++#undef DO1
++#undef DO8
+ #define DO1 crc = crc_table[0][((int)crc ^ (*buf++)) & 0xff] ^ (crc >> 8)
+ #define DO8 DO1; DO1; DO1; DO1; DO1; DO1; DO1; DO1
+
+diff --git a/src/gzip/gzguts.h b/src/gzip/gzguts.h
+index 990a4d251..a27f38998 100644
+--- a/src/gzip/gzguts.h
++++ b/src/gzip/gzguts.h
+@@ -163,7 +163,7 @@
+
+ /* values for gz_state how */
+ #define LOOK 0 /* look for a gzip header */
+-#define COPY 1 /* copy input directly */
++#define COPY__ 1 /* copy input directly */
+ #define GZIP 2 /* decompress a gzip stream */
+
+ /* internal gzip file state data structure */
+diff --git a/src/gzip/inflate.c b/src/gzip/inflate.c
+index ac333e8c2..fa61003ce 100644
+--- a/src/gzip/inflate.c
++++ b/src/gzip/inflate.c
+@@ -99,8 +99,10 @@ local int updatewindow OF((z_streamp strm, const unsigned char FAR *end,
+ #ifdef BUILDFIXED
+ void makefixed OF((void));
+ #endif
++#ifndef Z_FREETYPE
+ local unsigned syncsearch OF((unsigned FAR *have, const unsigned char FAR *buf,
+ unsigned len));
++#endif
+
+ local int inflateStateCheck(strm)
+ z_streamp strm;
+@@ -244,6 +246,8 @@ int stream_size;
+ return inflateInit2_(strm, DEF_WBITS, version, stream_size);
+ }
+
++#ifndef Z_FREETYPE
++
+ int ZEXPORT inflatePrime(strm, bits, value)
+ z_streamp strm;
+ int bits;
+@@ -265,6 +269,8 @@ int value;
+ return Z_OK;
+ }
+
++#endif /* Z_FREETYPE */
++
+ /*
+ Return state with length and distance decoding tables and index sizes set to
+ fixed code decoding. Normally this returns fixed tables from inffixed.h.
+@@ -1288,6 +1294,8 @@ z_streamp strm;
+ return Z_OK;
+ }
+
++#ifndef Z_FREETYPE
++
+ int ZEXPORT inflateGetDictionary(strm, dictionary, dictLength)
+ z_streamp strm;
+ Bytef *dictionary;
+@@ -1440,6 +1448,8 @@ z_streamp strm;
+ return Z_OK;
+ }
+
++#endif /* !Z_FREETYPE */
++
+ /*
+ Returns true if inflate is currently at the end of a block generated by
+ Z_SYNC_FLUSH or Z_FULL_FLUSH. This function is used by one PPP
+@@ -1458,6 +1468,8 @@ z_streamp strm;
+ return state->mode == STORED && state->bits == 0;
+ }
+
++#if !Z_FREETYPE
++
+ int ZEXPORT inflateCopy(dest, source)
+ z_streamp dest;
+ z_streamp source;
+@@ -1505,6 +1517,8 @@ z_streamp source;
+ return Z_OK;
+ }
+
++#endif /* !Z_FREETYPE */
++
+ int ZEXPORT inflateUndermine(strm, subvert)
+ z_streamp strm;
+ int subvert;
+@@ -1538,6 +1552,8 @@ int check;
+ return Z_OK;
+ }
+
++#ifndef Z_FREETYPE
++
+ long ZEXPORT inflateMark(strm)
+ z_streamp strm;
+ {
+@@ -1559,3 +1575,5 @@ z_streamp strm;
+ state = (struct inflate_state FAR *)strm->state;
+ return (unsigned long)(state->next - state->codes);
+ }
++
++#endif /* !Z_FREETYPE */
+diff --git a/src/gzip/inflate.h b/src/gzip/inflate.h
+index a46cce6b6..92ea758e2 100644
+--- a/src/gzip/inflate.h
++++ b/src/gzip/inflate.h
+@@ -3,6 +3,9 @@
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
++#ifndef INFLATE_H
++#define INFLATE_H
++
+ /* WARNING: this file should *not* be used by applications. It is
+ part of the implementation of the compression library and is
+ subject to change. Applications should only use zlib.h.
+@@ -123,3 +126,5 @@ struct inflate_state {
+ int back; /* bits back of last unprocessed length/lit */
+ unsigned was; /* initial length of match */
+ };
++
++#endif /* INFLATE_H */
+diff --git a/src/gzip/inftrees.h b/src/gzip/inftrees.h
+index baa53a0b1..c94eb78b5 100644
+--- a/src/gzip/inftrees.h
++++ b/src/gzip/inftrees.h
+@@ -3,6 +3,9 @@
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
++#ifndef INFTREES_H
++#define INFTREES_H
++
+ /* WARNING: this file should *not* be used by applications. It is
+ part of the implementation of the compression library and is
+ subject to change. Applications should only use zlib.h.
+@@ -60,3 +63,5 @@ typedef enum {
+ int ZLIB_INTERNAL inflate_table OF((codetype type, unsigned short FAR *lens,
+ unsigned codes, code FAR * FAR *table,
+ unsigned FAR *bits, unsigned short FAR *work));
++
++#endif /* INFTREES_H_ */
+diff --git a/src/gzip/zlib.h b/src/gzip/zlib.h
+index f09cdaf1e..ff5ae736d 100644
+--- a/src/gzip/zlib.h
++++ b/src/gzip/zlib.h
+@@ -31,7 +31,7 @@
+ #ifndef ZLIB_H
+ #define ZLIB_H
+
+-#include "zconf.h"
++#include "ftzconf.h"
+
+ #ifdef __cplusplus
+ extern "C" {
+@@ -211,6 +211,8 @@ typedef gz_header FAR *gz_headerp;
+
+ #define Z_NULL 0 /* for initializing zalloc, zfree, opaque */
+
++#ifndef Z_FREETYPE
++
+ #define zlib_version zlibVersion()
+ /* for compatibility with versions < 1.0.2 */
+
+@@ -246,7 +248,6 @@ ZEXTERN int ZEXPORT deflateInit OF((z_streamp strm, int level));
+ this will be done by deflate().
+ */
+
+-
+ ZEXTERN int ZEXPORT deflate OF((z_streamp strm, int flush));
+ /*
+ deflate compresses as much data as possible, and stops when the input
+@@ -373,6 +374,7 @@ ZEXTERN int ZEXPORT deflateEnd OF((z_streamp strm));
+ deallocated).
+ */
+
++#endif /* !Z_FREETYPE */
+
+ /*
+ ZEXTERN int ZEXPORT inflateInit OF((z_streamp strm));
+@@ -534,6 +536,8 @@ ZEXTERN int ZEXPORT inflateEnd OF((z_streamp strm));
+ The following functions are needed only in some special applications.
+ */
+
++#ifndef Z_FREETYPE
++
+ /*
+ ZEXTERN int ZEXPORT deflateInit2 OF((z_streamp strm,
+ int level,
+@@ -954,6 +958,8 @@ ZEXTERN int ZEXPORT inflateCopy OF((z_streamp dest,
+ destination.
+ */
+
++#endif /* !Z_FREETYPE */
++
+ ZEXTERN int ZEXPORT inflateReset OF((z_streamp strm));
+ /*
+ This function is equivalent to inflateEnd followed by inflateInit,
+@@ -978,6 +984,8 @@ ZEXTERN int ZEXPORT inflateReset2 OF((z_streamp strm,
+ the windowBits parameter is invalid.
+ */
+
++#ifndef Z_FREETYPE
++
+ ZEXTERN int ZEXPORT inflatePrime OF((z_streamp strm,
+ int bits,
+ int value));
+@@ -1067,6 +1075,8 @@ ZEXTERN int ZEXPORT inflateGetHeader OF((z_streamp strm,
+ stream state was inconsistent.
+ */
+
++#endif /* !Z_FREETYPE */
++
+ /*
+ ZEXTERN int ZEXPORT inflateBackInit OF((z_streamp strm, int windowBits,
+ unsigned char FAR *window));
+@@ -1093,6 +1103,8 @@ typedef unsigned (*in_func) OF((void FAR *,
+ z_const unsigned char FAR * FAR *));
+ typedef int (*out_func) OF((void FAR *, unsigned char FAR *, unsigned));
+
++#ifndef Z_FREETYPE
++
+ ZEXTERN int ZEXPORT inflateBack OF((z_streamp strm,
+ in_func in, void FAR *in_desc,
+ out_func out, void FAR *out_desc));
+@@ -1212,6 +1224,8 @@ ZEXTERN uLong ZEXPORT zlibCompileFlags OF((void));
+ 27-31: 0 (reserved)
+ */
+
++#endif /* !Z_FREETYPE */
++
+ #ifndef Z_SOLO
+
+ /* utility functions */
+@@ -1739,6 +1753,8 @@ ZEXTERN uLong ZEXPORT crc32 OF((uLong crc, const Bytef *buf, uInt len));
+ if (crc != original_crc) error();
+ */
+
++#ifndef Z_FREETYPE
++
+ ZEXTERN uLong ZEXPORT crc32_z OF((uLong adler, const Bytef *buf,
+ z_size_t len));
+ /*
+@@ -1755,7 +1771,6 @@ ZEXTERN uLong ZEXPORT crc32_combine OF((uLong crc1, uLong crc2, z_off_t len2));
+ len2.
+ */
+
+-
+ /* various hacks, don't look :) */
+
+ /* deflateInit and inflateInit are macros to allow checking the zlib version
+@@ -1763,6 +1778,7 @@ ZEXTERN uLong ZEXPORT crc32_combine OF((uLong crc1, uLong crc2, z_off_t len2));
+ */
+ ZEXTERN int ZEXPORT deflateInit_ OF((z_streamp strm, int level,
+ const char *version, int stream_size));
++
+ ZEXTERN int ZEXPORT inflateInit_ OF((z_streamp strm,
+ const char *version, int stream_size));
+ ZEXTERN int ZEXPORT deflateInit2_ OF((z_streamp strm, int level, int method,
+@@ -1805,6 +1821,19 @@ ZEXTERN int ZEXPORT inflateBackInit_ OF((z_streamp strm, int windowBits,
+ ZLIB_VERSION, (int)sizeof(z_stream))
+ #endif
+
++#else /* Z_FREETYPE */
++
++
++ZEXTERN int ZEXPORT inflateInit2_ OF((z_streamp strm, int windowBits,
++ const char *version, int stream_size));
++
++# define inflateInit2(strm, windowBits) \
++ inflateInit2_((strm), (windowBits), ZLIB_VERSION, \
++ (int)sizeof(z_stream))
++
++#endif /* Z_FREETYPE */
++
++
+ #ifndef Z_SOLO
+
+ /* gzgetc() macro and its supporting function and exposed data structure. Note
+@@ -1879,12 +1908,15 @@ ZEXTERN int ZEXPORT gzgetc_ OF((gzFile file)); /* backward compatibility */
+
+ #else /* Z_SOLO */
+
++#ifndef Z_FREETYPE
+ ZEXTERN uLong ZEXPORT adler32_combine OF((uLong, uLong, z_off_t));
+ ZEXTERN uLong ZEXPORT crc32_combine OF((uLong, uLong, z_off_t));
++#endif
+
+ #endif /* !Z_SOLO */
+
+ /* undocumented functions */
++#ifndef Z_FREETYPE
+ ZEXTERN const char * ZEXPORT zError OF((int));
+ ZEXTERN int ZEXPORT inflateSyncPoint OF((z_streamp));
+ ZEXTERN const z_crc_t FAR * ZEXPORT get_crc_table OF((void));
+@@ -1904,6 +1936,7 @@ ZEXTERN int ZEXPORTVA gzvprintf Z_ARG((gzFile file,
+ va_list va));
+ # endif
+ #endif
++#endif /* !Z_FREETYPE */
+
+ #ifdef __cplusplus
+ }
+diff --git a/src/gzip/zutil.h b/src/gzip/zutil.h
+index b079ea6a8..a38573878 100644
+--- a/src/gzip/zutil.h
++++ b/src/gzip/zutil.h
+@@ -185,6 +185,8 @@ extern z_const char * const z_errmsg[10]; /* indexed by 2-zlib_error */
+ #pragma warn -8066
+ #endif
+
++#ifndef Z_FREETYPE
++
+ /* provide prototypes for these when building zlib without LFS */
+ #if !defined(_WIN32) && \
+ (!defined(_LARGEFILE64_SOURCE) || _LFS64_LARGEFILE-0 == 0)
+@@ -192,6 +194,8 @@ extern z_const char * const z_errmsg[10]; /* indexed by 2-zlib_error */
+ ZEXTERN uLong ZEXPORT crc32_combine64 OF((uLong, uLong, z_off_t));
+ #endif
+
++#endif /* !Z_FREETYPE */
++
+ /* common defaults */
+
+ #ifndef OS_CODE
+@@ -223,9 +227,9 @@ extern z_const char * const z_errmsg[10]; /* indexed by 2-zlib_error */
+ # define zmemcmp _fmemcmp
+ # define zmemzero(dest, len) _fmemset(dest, 0, len)
+ # else
+-# define zmemcpy memcpy
+-# define zmemcmp memcmp
+-# define zmemzero(dest, len) memset(dest, 0, len)
++# define zmemcpy ft_memcpy
++# define zmemcmp ft_memcmp
++# define zmemzero(dest, len) ft_memset(dest, 0, len)
+ # endif
+ #else
+ void ZLIB_INTERNAL zmemcpy OF((Bytef* dest, const Bytef* source, uInt len));
+--
+2.30.2
+
diff --git a/src/gzip/rules.mk b/src/gzip/rules.mk
index 1a90ae8..e4de3c4 100644
--- a/src/gzip/rules.mk
+++ b/src/gzip/rules.mk
@@ -40,17 +40,17 @@ endif
# unconditionally.
#
GZIP_DRV_SRCS := $(GZIP_DIR)/adler32.c \
+ $(GZIP_DIR)/crc32.c \
+ $(GZIP_DIR)/crc32.h \
$(GZIP_DIR)/ftzconf.h \
- $(GZIP_DIR)/infblock.c \
- $(GZIP_DIR)/infblock.h \
- $(GZIP_DIR)/infcodes.c \
- $(GZIP_DIR)/infcodes.h \
+ $(GZIP_DIR)/infback.c \
+ $(GZIP_DIR)/inffast.c \
+ $(GZIP_DIR)/inffast.h \
$(GZIP_DIR)/inffixed.h \
$(GZIP_DIR)/inflate.c \
+ $(GZIP_DIR)/inflate.h \
$(GZIP_DIR)/inftrees.c \
$(GZIP_DIR)/inftrees.h \
- $(GZIP_DIR)/infutil.c \
- $(GZIP_DIR)/infutil.h \
$(GZIP_DIR)/zlib.h \
$(GZIP_DIR)/zutil.c \
$(GZIP_DIR)/zutil.h
diff --git a/src/gzip/zlib.h b/src/gzip/zlib.h
index a4e82c6..ff5ae73 100644
--- a/src/gzip/zlib.h
+++ b/src/gzip/zlib.h
@@ -1,7 +1,7 @@
/* zlib.h -- interface of the 'zlib' general purpose compression library
- version 1.1.4, March 11th, 2002
+ version 1.2.11, January 15th, 2017
- Copyright (C) 1995-2002 Jean-loup Gailly and Mark Adler
+ Copyright (C) 1995-2017 Jean-loup Gailly and Mark Adler
This software is provided 'as-is', without any express or implied
warranty. In no event will the authors be held liable for any damages
@@ -24,12 +24,12 @@
The data format used by the zlib library is described by RFCs (Request for
- Comments) 1950 to 1952 in the files ftp://ds.internic.net/rfc/rfc1950.txt
- (zlib format), rfc1951.txt (deflate format) and rfc1952.txt (gzip format).
+ Comments) 1950 to 1952 in the files http://tools.ietf.org/html/rfc1950
+ (zlib format), rfc1951 (deflate format) and rfc1952 (gzip format).
*/
-#ifndef _ZLIB_H
-#define _ZLIB_H
+#ifndef ZLIB_H
+#define ZLIB_H
#include "ftzconf.h"
@@ -37,27 +37,45 @@
extern "C" {
#endif
-#define ZLIB_VERSION "1.1.4"
+#define ZLIB_VERSION "1.2.11"
+#define ZLIB_VERNUM 0x12b0
+#define ZLIB_VER_MAJOR 1
+#define ZLIB_VER_MINOR 2
+#define ZLIB_VER_REVISION 11
+#define ZLIB_VER_SUBREVISION 0
/*
- The 'zlib' compression library provides in-memory compression and
- decompression functions, including integrity checks of the uncompressed
- data. This version of the library supports only one compression method
- (deflation) but other algorithms will be added later and will have the same
- stream interface.
-
- Compression can be done in a single step if the buffers are large
- enough (for example if an input file is mmap'ed), or can be done by
- repeated calls of the compression function. In the latter case, the
- application must provide more input and/or consume the output
+ The 'zlib' compression library provides in-memory compression and
+ decompression functions, including integrity checks of the uncompressed data.
+ This version of the library supports only one compression method (deflation)
+ but other algorithms will be added later and will have the same stream
+ interface.
+
+ Compression can be done in a single step if the buffers are large enough,
+ or can be done by repeated calls of the compression function. In the latter
+ case, the application must provide more input and/or consume the output
(providing more output space) before each call.
- The library also supports reading and writing files in gzip (.gz) format
- with an interface similar to that of stdio.
+ The compressed data format used by default by the in-memory functions is
+ the zlib format, which is a zlib wrapper documented in RFC 1950, wrapped
+ around a deflate stream, which is itself documented in RFC 1951.
+
+ The library also supports reading and writing files in gzip (.gz) format
+ with an interface similar to that of stdio using the functions that start
+ with "gz". The gzip format is different from the zlib format. gzip is a
+ gzip wrapper, documented in RFC 1952, wrapped around a deflate stream.
+
+ This library can optionally read and write gzip and raw deflate streams in
+ memory as well.
- The library does not install any signal handler. The decoder checks
- the consistency of the compressed data, so the library should never
- crash even in case of corrupted input.
+ The zlib format was designed to be compact and fast for use in memory
+ and on communications channels. The gzip format was designed for single-
+ file compression on file systems, has a larger header than zlib to maintain
+ directory information, and uses a different, slower check method than zlib.
+
+ The library does not install any signal handler. The decoder checks
+ the consistency of the compressed data, so the library should never crash
+ even in the case of corrupted input.
*/
typedef voidpf (*alloc_func) OF((voidpf opaque, uInt items, uInt size));
@@ -66,68 +84,95 @@ typedef void (*free_func) OF((voidpf opaque, voidpf address));
struct internal_state;
typedef struct z_stream_s {
- Bytef *next_in; /* next input byte */
+ z_const Bytef *next_in; /* next input byte */
uInt avail_in; /* number of bytes available at next_in */
- uLong total_in; /* total nb of input bytes read so far */
+ uLong total_in; /* total number of input bytes read so far */
- Bytef *next_out; /* next output byte should be put there */
+ Bytef *next_out; /* next output byte will go here */
uInt avail_out; /* remaining free space at next_out */
- uLong total_out; /* total nb of bytes output so far */
+ uLong total_out; /* total number of bytes output so far */
- char *msg; /* last error message, NULL if no error */
+ z_const char *msg; /* last error message, NULL if no error */
struct internal_state FAR *state; /* not visible by applications */
alloc_func zalloc; /* used to allocate the internal state */
free_func zfree; /* used to free the internal state */
voidpf opaque; /* private data object passed to zalloc and zfree */
- int data_type; /* best guess about the data type: ascii or binary */
- uLong adler; /* adler32 value of the uncompressed data */
+ int data_type; /* best guess about the data type: binary or text
+ for deflate, or the decoding state for inflate */
+ uLong adler; /* Adler-32 or CRC-32 value of the uncompressed data */
uLong reserved; /* reserved for future use */
} z_stream;
typedef z_stream FAR *z_streamp;
/*
- The application must update next_in and avail_in when avail_in has
- dropped to zero. It must update next_out and avail_out when avail_out
- has dropped to zero. The application must initialize zalloc, zfree and
- opaque before calling the init function. All other fields are set by the
- compression library and must not be updated by the application.
+ gzip header information passed to and from zlib routines. See RFC 1952
+ for more details on the meanings of these fields.
+*/
+typedef struct gz_header_s {
+ int text; /* true if compressed data believed to be text */
+ uLong time; /* modification time */
+ int xflags; /* extra flags (not used when writing a gzip file) */
+ int os; /* operating system */
+ Bytef *extra; /* pointer to extra field or Z_NULL if none */
+ uInt extra_len; /* extra field length (valid if extra != Z_NULL) */
+ uInt extra_max; /* space at extra (only when reading header) */
+ Bytef *name; /* pointer to zero-terminated file name or Z_NULL */
+ uInt name_max; /* space at name (only when reading header) */
+ Bytef *comment; /* pointer to zero-terminated comment or Z_NULL */
+ uInt comm_max; /* space at comment (only when reading header) */
+ int hcrc; /* true if there was or will be a header crc */
+ int done; /* true when done reading gzip header (not used
+ when writing a gzip file) */
+} gz_header;
+
+typedef gz_header FAR *gz_headerp;
- The opaque value provided by the application will be passed as the first
- parameter for calls of zalloc and zfree. This can be useful for custom
- memory management. The compression library attaches no meaning to the
+/*
+ The application must update next_in and avail_in when avail_in has dropped
+ to zero. It must update next_out and avail_out when avail_out has dropped
+ to zero. The application must initialize zalloc, zfree and opaque before
+ calling the init function. All other fields are set by the compression
+ library and must not be updated by the application.
+
+ The opaque value provided by the application will be passed as the first
+ parameter for calls of zalloc and zfree. This can be useful for custom
+ memory management. The compression library attaches no meaning to the
opaque value.
- zalloc must return Z_NULL if there is not enough memory for the object.
+ zalloc must return Z_NULL if there is not enough memory for the object.
If zlib is used in a multi-threaded application, zalloc and zfree must be
- thread safe.
-
- On 16-bit systems, the functions zalloc and zfree must be able to allocate
- exactly 65536 bytes, but will not be required to allocate more than this
- if the symbol MAXSEG_64K is defined (see zconf.h). WARNING: On MSDOS,
- pointers returned by zalloc for objects of exactly 65536 bytes *must*
- have their offset normalized to zero. The default allocation function
- provided by this library ensures this (see zutil.c). To reduce memory
- requirements and avoid any allocation of 64K objects, at the expense of
- compression ratio, compile the library with -DMAX_WBITS=14 (see zconf.h).
-
- The fields total_in and total_out can be used for statistics or
- progress reports. After compression, total_in holds the total size of
- the uncompressed data and may be saved for use in the decompressor
- (particularly if the decompressor wants to decompress everything in
- a single step).
+ thread safe. In that case, zlib is thread-safe. When zalloc and zfree are
+ Z_NULL on entry to the initialization function, they are set to internal
+ routines that use the standard library functions malloc() and free().
+
+ On 16-bit systems, the functions zalloc and zfree must be able to allocate
+ exactly 65536 bytes, but will not be required to allocate more than this if
+ the symbol MAXSEG_64K is defined (see zconf.h). WARNING: On MSDOS, pointers
+ returned by zalloc for objects of exactly 65536 bytes *must* have their
+ offset normalized to zero. The default allocation function provided by this
+ library ensures this (see zutil.c). To reduce memory requirements and avoid
+ any allocation of 64K objects, at the expense of compression ratio, compile
+ the library with -DMAX_WBITS=14 (see zconf.h).
+
+ The fields total_in and total_out can be used for statistics or progress
+ reports. After compression, total_in holds the total size of the
+ uncompressed data and may be saved for use by the decompressor (particularly
+ if the decompressor wants to decompress everything in a single step).
*/
/* constants */
#define Z_NO_FLUSH 0
-#define Z_PARTIAL_FLUSH 1 /* will be removed, use Z_SYNC_FLUSH instead */
+#define Z_PARTIAL_FLUSH 1
#define Z_SYNC_FLUSH 2
#define Z_FULL_FLUSH 3
#define Z_FINISH 4
-/* Allowed flush values; see deflate() below for details */
+#define Z_BLOCK 5
+#define Z_TREES 6
+/* Allowed flush values; see deflate() and inflate() below for details */
#define Z_OK 0
#define Z_STREAM_END 1
@@ -138,8 +183,8 @@ typedef z_stream FAR *z_streamp;
#define Z_MEM_ERROR (-4)
#define Z_BUF_ERROR (-5)
#define Z_VERSION_ERROR (-6)
-/* Return codes for the compression/decompression functions. Negative
- * values are errors, positive values are used for special but normal events.
+/* Return codes for the compression/decompression functions. Negative values
+ * are errors, positive values are used for special but normal events.
*/
#define Z_NO_COMPRESSION 0
@@ -150,636 +195,1520 @@ typedef z_stream FAR *z_streamp;
#define Z_FILTERED 1
#define Z_HUFFMAN_ONLY 2
+#define Z_RLE 3
+#define Z_FIXED 4
#define Z_DEFAULT_STRATEGY 0
/* compression strategy; see deflateInit2() below for details */
#define Z_BINARY 0
-#define Z_ASCII 1
+#define Z_TEXT 1
+#define Z_ASCII Z_TEXT /* for compatibility with 1.2.2 and earlier */
#define Z_UNKNOWN 2
-/* Possible values of the data_type field */
+/* Possible values of the data_type field for deflate() */
#define Z_DEFLATED 8
/* The deflate compression method (the only one supported in this version) */
#define Z_NULL 0 /* for initializing zalloc, zfree, opaque */
+#ifndef Z_FREETYPE
+
+#define zlib_version zlibVersion()
+/* for compatibility with versions < 1.0.2 */
+
/* basic functions */
+ZEXTERN const char * ZEXPORT zlibVersion OF((void));
/* The application can compare zlibVersion and ZLIB_VERSION for consistency.
- If the first character differs, the library code actually used is
- not compatible with the zlib.h header file used by the application.
- This check is automatically made by deflateInit and inflateInit.
+ If the first character differs, the library code actually used is not
+ compatible with the zlib.h header file used by the application. This check
+ is automatically made by deflateInit and inflateInit.
*/
/*
-ZEXTERN(int) deflateInit OF((z_streamp strm, int level));
+ZEXTERN int ZEXPORT deflateInit OF((z_streamp strm, int level));
- Initializes the internal stream state for compression. The fields
- zalloc, zfree and opaque must be initialized before by the caller.
- If zalloc and zfree are set to Z_NULL, deflateInit updates them to
- use default allocation functions.
+ Initializes the internal stream state for compression. The fields
+ zalloc, zfree and opaque must be initialized before by the caller. If
+ zalloc and zfree are set to Z_NULL, deflateInit updates them to use default
+ allocation functions.
The compression level must be Z_DEFAULT_COMPRESSION, or between 0 and 9:
- 1 gives best speed, 9 gives best compression, 0 gives no compression at
- all (the input data is simply copied a block at a time).
- Z_DEFAULT_COMPRESSION requests a default compromise between speed and
- compression (currently equivalent to level 6).
+ 1 gives best speed, 9 gives best compression, 0 gives no compression at all
+ (the input data is simply copied a block at a time). Z_DEFAULT_COMPRESSION
+ requests a default compromise between speed and compression (currently
+ equivalent to level 6).
- deflateInit returns Z_OK if success, Z_MEM_ERROR if there was not
- enough memory, Z_STREAM_ERROR if level is not a valid compression level,
+ deflateInit returns Z_OK if success, Z_MEM_ERROR if there was not enough
+ memory, Z_STREAM_ERROR if level is not a valid compression level, or
Z_VERSION_ERROR if the zlib library version (zlib_version) is incompatible
- with the version assumed by the caller (ZLIB_VERSION).
- msg is set to null if there is no error message. deflateInit does not
- perform any compression: this will be done by deflate().
+ with the version assumed by the caller (ZLIB_VERSION). msg is set to null
+ if there is no error message. deflateInit does not perform any compression:
+ this will be done by deflate().
*/
-
+ZEXTERN int ZEXPORT deflate OF((z_streamp strm, int flush));
/*
deflate compresses as much data as possible, and stops when the input
- buffer becomes empty or the output buffer becomes full. It may introduce some
- output latency (reading input without producing any output) except when
+ buffer becomes empty or the output buffer becomes full. It may introduce
+ some output latency (reading input without producing any output) except when
forced to flush.
- The detailed semantics are as follows. deflate performs one or both of the
+ The detailed semantics are as follows. deflate performs one or both of the
following actions:
- Compress more input starting at next_in and update next_in and avail_in
- accordingly. If not all input can be processed (because there is not
+ accordingly. If not all input can be processed (because there is not
enough room in the output buffer), next_in and avail_in are updated and
processing will resume at this point for the next call of deflate().
- - Provide more output starting at next_out and update next_out and avail_out
- accordingly. This action is forced if the parameter flush is non zero.
+ - Generate more output starting at next_out and update next_out and avail_out
+ accordingly. This action is forced if the parameter flush is non zero.
Forcing flush frequently degrades the compression ratio, so this parameter
- should be set only when necessary (in interactive applications).
- Some output may be provided even if flush is not set.
-
- Before the call of deflate(), the application should ensure that at least
- one of the actions is possible, by providing more input and/or consuming
- more output, and updating avail_in or avail_out accordingly; avail_out
- should never be zero before the call. The application can consume the
- compressed output when it wants, for example when the output buffer is full
- (avail_out == 0), or after each call of deflate(). If deflate returns Z_OK
- and with zero avail_out, it must be called again after making room in the
- output buffer because there might be more output pending.
+ should be set only when necessary. Some output may be provided even if
+ flush is zero.
+
+ Before the call of deflate(), the application should ensure that at least
+ one of the actions is possible, by providing more input and/or consuming more
+ output, and updating avail_in or avail_out accordingly; avail_out should
+ never be zero before the call. The application can consume the compressed
+ output when it wants, for example when the output buffer is full (avail_out
+ == 0), or after each call of deflate(). If deflate returns Z_OK and with
+ zero avail_out, it must be called again after making room in the output
+ buffer because there might be more output pending. See deflatePending(),
+ which can be used if desired to determine whether or not there is more ouput
+ in that case.
+
+ Normally the parameter flush is set to Z_NO_FLUSH, which allows deflate to
+ decide how much data to accumulate before producing output, in order to
+ maximize compression.
If the parameter flush is set to Z_SYNC_FLUSH, all pending output is
flushed to the output buffer and the output is aligned on a byte boundary, so
- that the decompressor can get all input data available so far. (In particular
- avail_in is zero after the call if enough output space has been provided
- before the call.) Flushing may degrade compression for some compression
- algorithms and so it should be used only when necessary.
+ that the decompressor can get all input data available so far. (In
+ particular avail_in is zero after the call if enough output space has been
+ provided before the call.) Flushing may degrade compression for some
+ compression algorithms and so it should be used only when necessary. This
+ completes the current deflate block and follows it with an empty stored block
+ that is three bits plus filler bits to the next byte, followed by four bytes
+ (00 00 ff ff).
+
+ If flush is set to Z_PARTIAL_FLUSH, all pending output is flushed to the
+ output buffer, but the output is not aligned to a byte boundary. All of the
+ input data so far will be available to the decompressor, as for Z_SYNC_FLUSH.
+ This completes the current deflate block and follows it with an empty fixed
+ codes block that is 10 bits long. This assures that enough bytes are output
+ in order for the decompressor to finish the block before the empty fixed
+ codes block.
+
+ If flush is set to Z_BLOCK, a deflate block is completed and emitted, as
+ for Z_SYNC_FLUSH, but the output is not aligned on a byte boundary, and up to
+ seven bits of the current block are held to be written as the next byte after
+ the next deflate block is completed. In this case, the decompressor may not
+ be provided enough bits at this point in order to complete decompression of
+ the data provided so far to the compressor. It may need to wait for the next
+ block to be emitted. This is for advanced applications that need to control
+ the emission of deflate blocks.
If flush is set to Z_FULL_FLUSH, all output is flushed as with
Z_SYNC_FLUSH, and the compression state is reset so that decompression can
restart from this point if previous compressed data has been damaged or if
- random access is desired. Using Z_FULL_FLUSH too often can seriously degrade
- the compression.
+ random access is desired. Using Z_FULL_FLUSH too often can seriously degrade
+ compression.
If deflate returns with avail_out == 0, this function must be called again
with the same value of the flush parameter and more output space (updated
avail_out), until the flush is complete (deflate returns with non-zero
- avail_out).
+ avail_out). In the case of a Z_FULL_FLUSH or Z_SYNC_FLUSH, make sure that
+ avail_out is greater than six to avoid repeated flush markers due to
+ avail_out == 0 on return.
If the parameter flush is set to Z_FINISH, pending input is processed,
- pending output is flushed and deflate returns with Z_STREAM_END if there
- was enough output space; if deflate returns with Z_OK, this function must be
- called again with Z_FINISH and more output space (updated avail_out) but no
- more input data, until it returns with Z_STREAM_END or an error. After
- deflate has returned Z_STREAM_END, the only possible operations on the
- stream are deflateReset or deflateEnd.
-
- Z_FINISH can be used immediately after deflateInit if all the compression
- is to be done in a single step. In this case, avail_out must be at least
- 0.1% larger than avail_in plus 12 bytes. If deflate does not return
- Z_STREAM_END, then it must be called again as described above.
-
- deflate() sets strm->adler to the adler32 checksum of all input read
- so far (that is, total_in bytes).
-
- deflate() may update data_type if it can make a good guess about
- the input data type (Z_ASCII or Z_BINARY). In doubt, the data is considered
- binary. This field is only for information purposes and does not affect
- the compression algorithm in any manner.
+ pending output is flushed and deflate returns with Z_STREAM_END if there was
+ enough output space. If deflate returns with Z_OK or Z_BUF_ERROR, this
+ function must be called again with Z_FINISH and more output space (updated
+ avail_out) but no more input data, until it returns with Z_STREAM_END or an
+ error. After deflate has returned Z_STREAM_END, the only possible operations
+ on the stream are deflateReset or deflateEnd.
+
+ Z_FINISH can be used in the first deflate call after deflateInit if all the
+ compression is to be done in a single step. In order to complete in one
+ call, avail_out must be at least the value returned by deflateBound (see
+ below). Then deflate is guaranteed to return Z_STREAM_END. If not enough
+ output space is provided, deflate will not return Z_STREAM_END, and it must
+ be called again as described above.
+
+ deflate() sets strm->adler to the Adler-32 checksum of all input read
+ so far (that is, total_in bytes). If a gzip stream is being generated, then
+ strm->adler will be the CRC-32 checksum of the input read so far. (See
+ deflateInit2 below.)
+
+ deflate() may update strm->data_type if it can make a good guess about
+ the input data type (Z_BINARY or Z_TEXT). If in doubt, the data is
+ considered binary. This field is only for information purposes and does not
+ affect the compression algorithm in any manner.
deflate() returns Z_OK if some progress has been made (more input
processed or more output produced), Z_STREAM_END if all input has been
consumed and all output has been produced (only when flush is set to
Z_FINISH), Z_STREAM_ERROR if the stream state was inconsistent (for example
- if next_in or next_out was NULL), Z_BUF_ERROR if no progress is possible
- (for example avail_in or avail_out was zero).
+ if next_in or next_out was Z_NULL or the state was inadvertently written over
+ by the application), or Z_BUF_ERROR if no progress is possible (for example
+ avail_in or avail_out was zero). Note that Z_BUF_ERROR is not fatal, and
+ deflate() can be called again with more input and more output space to
+ continue compressing.
*/
+ZEXTERN int ZEXPORT deflateEnd OF((z_streamp strm));
/*
All dynamically allocated data structures for this stream are freed.
- This function discards any unprocessed input and does not flush any
- pending output.
+ This function discards any unprocessed input and does not flush any pending
+ output.
deflateEnd returns Z_OK if success, Z_STREAM_ERROR if the
stream state was inconsistent, Z_DATA_ERROR if the stream was freed
- prematurely (some input or output was discarded). In the error case,
- msg may be set but then points to a static string (which must not be
+ prematurely (some input or output was discarded). In the error case, msg
+ may be set but then points to a static string (which must not be
deallocated).
*/
+#endif /* !Z_FREETYPE */
/*
-ZEXTERN(int) inflateInit OF((z_streamp strm));
+ZEXTERN int ZEXPORT inflateInit OF((z_streamp strm));
- Initializes the internal stream state for decompression. The fields
+ Initializes the internal stream state for decompression. The fields
next_in, avail_in, zalloc, zfree and opaque must be initialized before by
- the caller. If next_in is not Z_NULL and avail_in is large enough (the exact
- value depends on the compression method), inflateInit determines the
- compression method from the zlib header and allocates all data structures
- accordingly; otherwise the allocation will be deferred to the first call of
- inflate. If zalloc and zfree are set to Z_NULL, inflateInit updates them to
- use default allocation functions.
+ the caller. In the current version of inflate, the provided input is not
+ read or consumed. The allocation of a sliding window will be deferred to
+ the first call of inflate (if the decompression does not complete on the
+ first call). If zalloc and zfree are set to Z_NULL, inflateInit updates
+ them to use default allocation functions.
inflateInit returns Z_OK if success, Z_MEM_ERROR if there was not enough
memory, Z_VERSION_ERROR if the zlib library version is incompatible with the
- version assumed by the caller. msg is set to null if there is no error
- message. inflateInit does not perform any decompression apart from reading
- the zlib header if present: this will be done by inflate(). (So next_in and
- avail_in may be modified, but next_out and avail_out are unchanged.)
+ version assumed by the caller, or Z_STREAM_ERROR if the parameters are
+ invalid, such as a null pointer to the structure. msg is set to null if
+ there is no error message. inflateInit does not perform any decompression.
+ Actual decompression will be done by inflate(). So next_in, and avail_in,
+ next_out, and avail_out are unused and unchanged. The current
+ implementation of inflateInit() does not process any header information --
+ that is deferred until inflate() is called.
*/
-ZEXTERN(int) inflate OF((z_streamp strm, int flush));
+ZEXTERN int ZEXPORT inflate OF((z_streamp strm, int flush));
/*
inflate decompresses as much data as possible, and stops when the input
- buffer becomes empty or the output buffer becomes full. It may some
- introduce some output latency (reading input without producing any output)
- except when forced to flush.
+ buffer becomes empty or the output buffer becomes full. It may introduce
+ some output latency (reading input without producing any output) except when
+ forced to flush.
- The detailed semantics are as follows. inflate performs one or both of the
+ The detailed semantics are as follows. inflate performs one or both of the
following actions:
- Decompress more input starting at next_in and update next_in and avail_in
- accordingly. If not all input can be processed (because there is not
- enough room in the output buffer), next_in is updated and processing
- will resume at this point for the next call of inflate().
-
- - Provide more output starting at next_out and update next_out and avail_out
- accordingly. inflate() provides as much output as possible, until there
- is no more input data or no more space in the output buffer (see below
- about the flush parameter).
-
- Before the call of inflate(), the application should ensure that at least
- one of the actions is possible, by providing more input and/or consuming
- more output, and updating the next_* and avail_* values accordingly.
- The application can consume the uncompressed output when it wants, for
- example when the output buffer is full (avail_out == 0), or after each
- call of inflate(). If inflate returns Z_OK and with zero avail_out, it
- must be called again after making room in the output buffer because there
- might be more output pending.
-
- If the parameter flush is set to Z_SYNC_FLUSH, inflate flushes as much
- output as possible to the output buffer. The flushing behavior of inflate is
- not specified for values of the flush parameter other than Z_SYNC_FLUSH
- and Z_FINISH, but the current implementation actually flushes as much output
- as possible anyway.
+ accordingly. If not all input can be processed (because there is not
+ enough room in the output buffer), then next_in and avail_in are updated
+ accordingly, and processing will resume at this point for the next call of
+ inflate().
+
+ - Generate more output starting at next_out and update next_out and avail_out
+ accordingly. inflate() provides as much output as possible, until there is
+ no more input data or no more space in the output buffer (see below about
+ the flush parameter).
+
+ Before the call of inflate(), the application should ensure that at least
+ one of the actions is possible, by providing more input and/or consuming more
+ output, and updating the next_* and avail_* values accordingly. If the
+ caller of inflate() does not provide both available input and available
+ output space, it is possible that there will be no progress made. The
+ application can consume the uncompressed output when it wants, for example
+ when the output buffer is full (avail_out == 0), or after each call of
+ inflate(). If inflate returns Z_OK and with zero avail_out, it must be
+ called again after making room in the output buffer because there might be
+ more output pending.
+
+ The flush parameter of inflate() can be Z_NO_FLUSH, Z_SYNC_FLUSH, Z_FINISH,
+ Z_BLOCK, or Z_TREES. Z_SYNC_FLUSH requests that inflate() flush as much
+ output as possible to the output buffer. Z_BLOCK requests that inflate()
+ stop if and when it gets to the next deflate block boundary. When decoding
+ the zlib or gzip format, this will cause inflate() to return immediately
+ after the header and before the first block. When doing a raw inflate,
+ inflate() will go ahead and process the first block, and will return when it
+ gets to the end of that block, or when it runs out of data.
+
+ The Z_BLOCK option assists in appending to or combining deflate streams.
+ To assist in this, on return inflate() always sets strm->data_type to the
+ number of unused bits in the last byte taken from strm->next_in, plus 64 if
+ inflate() is currently decoding the last block in the deflate stream, plus
+ 128 if inflate() returned immediately after decoding an end-of-block code or
+ decoding the complete header up to just before the first byte of the deflate
+ stream. The end-of-block will not be indicated until all of the uncompressed
+ data from that block has been written to strm->next_out. The number of
+ unused bits may in general be greater than seven, except when bit 7 of
+ data_type is set, in which case the number of unused bits will be less than
+ eight. data_type is set as noted here every time inflate() returns for all
+ flush options, and so can be used to determine the amount of currently
+ consumed input in bits.
+
+ The Z_TREES option behaves as Z_BLOCK does, but it also returns when the
+ end of each deflate block header is reached, before any actual data in that
+ block is decoded. This allows the caller to determine the length of the
+ deflate block header for later use in random access within a deflate block.
+ 256 is added to the value of strm->data_type when inflate() returns
+ immediately after reaching the end of the deflate block header.
inflate() should normally be called until it returns Z_STREAM_END or an
- error. However if all decompression is to be performed in a single step
- (a single call of inflate), the parameter flush should be set to
- Z_FINISH. In this case all pending input is processed and all pending
- output is flushed; avail_out must be large enough to hold all the
- uncompressed data. (The size of the uncompressed data may have been saved
- by the compressor for this purpose.) The next operation on this stream must
- be inflateEnd to deallocate the decompression state. The use of Z_FINISH
- is never required, but can be used to inform inflate that a faster routine
- may be used for the single inflate() call.
-
- If a preset dictionary is needed at this point (see inflateSetDictionary
- below), inflate sets strm-adler to the adler32 checksum of the
- dictionary chosen by the compressor and returns Z_NEED_DICT; otherwise
- it sets strm->adler to the adler32 checksum of all output produced
- so far (that is, total_out bytes) and returns Z_OK, Z_STREAM_END or
- an error code as described below. At the end of the stream, inflate()
- checks that its computed adler32 checksum is equal to that saved by the
- compressor and returns Z_STREAM_END only if the checksum is correct.
+ error. However if all decompression is to be performed in a single step (a
+ single call of inflate), the parameter flush should be set to Z_FINISH. In
+ this case all pending input is processed and all pending output is flushed;
+ avail_out must be large enough to hold all of the uncompressed data for the
+ operation to complete. (The size of the uncompressed data may have been
+ saved by the compressor for this purpose.) The use of Z_FINISH is not
+ required to perform an inflation in one step. However it may be used to
+ inform inflate that a faster approach can be used for the single inflate()
+ call. Z_FINISH also informs inflate to not maintain a sliding window if the
+ stream completes, which reduces inflate's memory footprint. If the stream
+ does not complete, either because not all of the stream is provided or not
+ enough output space is provided, then a sliding window will be allocated and
+ inflate() can be called again to continue the operation as if Z_NO_FLUSH had
+ been used.
+
+ In this implementation, inflate() always flushes as much output as
+ possible to the output buffer, and always uses the faster approach on the
+ first call. So the effects of the flush parameter in this implementation are
+ on the return value of inflate() as noted below, when inflate() returns early
+ when Z_BLOCK or Z_TREES is used, and when inflate() avoids the allocation of
+ memory for a sliding window when Z_FINISH is used.
+
+ If a preset dictionary is needed after this call (see inflateSetDictionary
+ below), inflate sets strm->adler to the Adler-32 checksum of the dictionary
+ chosen by the compressor and returns Z_NEED_DICT; otherwise it sets
+ strm->adler to the Adler-32 checksum of all output produced so far (that is,
+ total_out bytes) and returns Z_OK, Z_STREAM_END or an error code as described
+ below. At the end of the stream, inflate() checks that its computed Adler-32
+ checksum is equal to that saved by the compressor and returns Z_STREAM_END
+ only if the checksum is correct.
+
+ inflate() can decompress and check either zlib-wrapped or gzip-wrapped
+ deflate data. The header type is detected automatically, if requested when
+ initializing with inflateInit2(). Any information contained in the gzip
+ header is not retained unless inflateGetHeader() is used. When processing
+ gzip-wrapped deflate data, strm->adler32 is set to the CRC-32 of the output
+ produced so far. The CRC-32 is checked against the gzip trailer, as is the
+ uncompressed length, modulo 2^32.
inflate() returns Z_OK if some progress has been made (more input processed
or more output produced), Z_STREAM_END if the end of the compressed data has
been reached and all uncompressed output has been produced, Z_NEED_DICT if a
preset dictionary is needed at this point, Z_DATA_ERROR if the input data was
- corrupted (input stream not conforming to the zlib format or incorrect
- adler32 checksum), Z_STREAM_ERROR if the stream structure was inconsistent
- (for example if next_in or next_out was NULL), Z_MEM_ERROR if there was not
- enough memory, Z_BUF_ERROR if no progress is possible or if there was not
- enough room in the output buffer when Z_FINISH is used. In the Z_DATA_ERROR
- case, the application may then call inflateSync to look for a good
- compression block.
+ corrupted (input stream not conforming to the zlib format or incorrect check
+ value, in which case strm->msg points to a string with a more specific
+ error), Z_STREAM_ERROR if the stream structure was inconsistent (for example
+ next_in or next_out was Z_NULL, or the state was inadvertently written over
+ by the application), Z_MEM_ERROR if there was not enough memory, Z_BUF_ERROR
+ if no progress was possible or if there was not enough room in the output
+ buffer when Z_FINISH is used. Note that Z_BUF_ERROR is not fatal, and
+ inflate() can be called again with more input and more output space to
+ continue decompressing. If Z_DATA_ERROR is returned, the application may
+ then call inflateSync() to look for a good compression block if a partial
+ recovery of the data is to be attempted.
*/
-ZEXTERN(int) inflateEnd OF((z_streamp strm));
+ZEXTERN int ZEXPORT inflateEnd OF((z_streamp strm));
/*
All dynamically allocated data structures for this stream are freed.
- This function discards any unprocessed input and does not flush any
- pending output.
+ This function discards any unprocessed input and does not flush any pending
+ output.
- inflateEnd returns Z_OK if success, Z_STREAM_ERROR if the stream state
- was inconsistent. In the error case, msg may be set but then points to a
- static string (which must not be deallocated).
+ inflateEnd returns Z_OK if success, or Z_STREAM_ERROR if the stream state
+ was inconsistent.
*/
+
/* Advanced functions */
/*
The following functions are needed only in some special applications.
*/
+#ifndef Z_FREETYPE
+
/*
-ZEXTERN(int) deflateInit2 OF((z_streamp strm,
+ZEXTERN int ZEXPORT deflateInit2 OF((z_streamp strm,
int level,
int method,
int windowBits,
int memLevel,
int strategy));
- This is another version of deflateInit with more compression options. The
- fields next_in, zalloc, zfree and opaque must be initialized before by
- the caller.
+ This is another version of deflateInit with more compression options. The
+ fields next_in, zalloc, zfree and opaque must be initialized before by the
+ caller.
- The method parameter is the compression method. It must be Z_DEFLATED in
+ The method parameter is the compression method. It must be Z_DEFLATED in
this version of the library.
The windowBits parameter is the base two logarithm of the window size
(the size of the history buffer). It should be in the range 8..15 for this
- version of the library. Larger values of this parameter result in better
- compression at the expense of memory usage. The default value is 15 if
+ version of the library. Larger values of this parameter result in better
+ compression at the expense of memory usage. The default value is 15 if
deflateInit is used instead.
+ For the current implementation of deflate(), a windowBits value of 8 (a
+ window size of 256 bytes) is not supported. As a result, a request for 8
+ will result in 9 (a 512-byte window). In that case, providing 8 to
+ inflateInit2() will result in an error when the zlib header with 9 is
+ checked against the initialization of inflate(). The remedy is to not use 8
+ with deflateInit2() with this initialization, or at least in that case use 9
+ with inflateInit2().
+
+ windowBits can also be -8..-15 for raw deflate. In this case, -windowBits
+ determines the window size. deflate() will then generate raw deflate data
+ with no zlib header or trailer, and will not compute a check value.
+
+ windowBits can also be greater than 15 for optional gzip encoding. Add
+ 16 to windowBits to write a simple gzip header and trailer around the
+ compressed data instead of a zlib wrapper. The gzip header will have no
+ file name, no extra data, no comment, no modification time (set to zero), no
+ header crc, and the operating system will be set to the appropriate value,
+ if the operating system was determined at compile time. If a gzip stream is
+ being written, strm->adler is a CRC-32 instead of an Adler-32.
+
+ For raw deflate or gzip encoding, a request for a 256-byte window is
+ rejected as invalid, since only the zlib header provides a means of
+ transmitting the window size to the decompressor.
+
The memLevel parameter specifies how much memory should be allocated
- for the internal compression state. memLevel=1 uses minimum memory but
- is slow and reduces compression ratio; memLevel=9 uses maximum memory
- for optimal speed. The default value is 8. See zconf.h for total memory
- usage as a function of windowBits and memLevel.
+ for the internal compression state. memLevel=1 uses minimum memory but is
+ slow and reduces compression ratio; memLevel=9 uses maximum memory for
+ optimal speed. The default value is 8. See zconf.h for total memory usage
+ as a function of windowBits and memLevel.
- The strategy parameter is used to tune the compression algorithm. Use the
+ The strategy parameter is used to tune the compression algorithm. Use the
value Z_DEFAULT_STRATEGY for normal data, Z_FILTERED for data produced by a
- filter (or predictor), or Z_HUFFMAN_ONLY to force Huffman encoding only (no
- string match). Filtered data consists mostly of small values with a
- somewhat random distribution. In this case, the compression algorithm is
- tuned to compress them better. The effect of Z_FILTERED is to force more
- Huffman coding and less string matching; it is somewhat intermediate
- between Z_DEFAULT and Z_HUFFMAN_ONLY. The strategy parameter only affects
- the compression ratio but not the correctness of the compressed output even
- if it is not set appropriately.
-
- deflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
- memory, Z_STREAM_ERROR if a parameter is invalid (such as an invalid
- method). msg is set to null if there is no error message. deflateInit2 does
- not perform any compression: this will be done by deflate().
+ filter (or predictor), Z_HUFFMAN_ONLY to force Huffman encoding only (no
+ string match), or Z_RLE to limit match distances to one (run-length
+ encoding). Filtered data consists mostly of small values with a somewhat
+ random distribution. In this case, the compression algorithm is tuned to
+ compress them better. The effect of Z_FILTERED is to force more Huffman
+ coding and less string matching; it is somewhat intermediate between
+ Z_DEFAULT_STRATEGY and Z_HUFFMAN_ONLY. Z_RLE is designed to be almost as
+ fast as Z_HUFFMAN_ONLY, but give better compression for PNG image data. The
+ strategy parameter only affects the compression ratio but not the
+ correctness of the compressed output even if it is not set appropriately.
+ Z_FIXED prevents the use of dynamic Huffman codes, allowing for a simpler
+ decoder for special applications.
+
+ deflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
+ memory, Z_STREAM_ERROR if any parameter is invalid (such as an invalid
+ method), or Z_VERSION_ERROR if the zlib library version (zlib_version) is
+ incompatible with the version assumed by the caller (ZLIB_VERSION). msg is
+ set to null if there is no error message. deflateInit2 does not perform any
+ compression: this will be done by deflate().
*/
+ZEXTERN int ZEXPORT deflateSetDictionary OF((z_streamp strm,
+ const Bytef *dictionary,
+ uInt dictLength));
/*
Initializes the compression dictionary from the given byte sequence
- without producing any compressed output. This function must be called
- immediately after deflateInit, deflateInit2 or deflateReset, before any
- call of deflate. The compressor and decompressor must use exactly the same
- dictionary (see inflateSetDictionary).
+ without producing any compressed output. When using the zlib format, this
+ function must be called immediately after deflateInit, deflateInit2 or
+ deflateReset, and before any call of deflate. When doing raw deflate, this
+ function must be called either before any call of deflate, or immediately
+ after the completion of a deflate block, i.e. after all input has been
+ consumed and all output has been delivered when using any of the flush
+ options Z_BLOCK, Z_PARTIAL_FLUSH, Z_SYNC_FLUSH, or Z_FULL_FLUSH. The
+ compressor and decompressor must use exactly the same dictionary (see
+ inflateSetDictionary).
The dictionary should consist of strings (byte sequences) that are likely
to be encountered later in the data to be compressed, with the most commonly
- used strings preferably put towards the end of the dictionary. Using a
+ used strings preferably put towards the end of the dictionary. Using a
dictionary is most useful when the data to be compressed is short and can be
predicted with good accuracy; the data can then be compressed better than
with the default empty dictionary.
Depending on the size of the compression data structures selected by
deflateInit or deflateInit2, a part of the dictionary may in effect be
- discarded, for example if the dictionary is larger than the window size in
- deflate or deflate2. Thus the strings most likely to be useful should be
- put at the end of the dictionary, not at the front.
+ discarded, for example if the dictionary is larger than the window size
+ provided in deflateInit or deflateInit2. Thus the strings most likely to be
+ useful should be put at the end of the dictionary, not at the front. In
+ addition, the current implementation of deflate will use at most the window
+ size minus 262 bytes of the provided dictionary.
- Upon return of this function, strm->adler is set to the Adler32 value
+ Upon return of this function, strm->adler is set to the Adler-32 value
of the dictionary; the decompressor may later use this value to determine
- which dictionary has been used by the compressor. (The Adler32 value
+ which dictionary has been used by the compressor. (The Adler-32 value
applies to the whole dictionary even if only a subset of the dictionary is
- actually used by the compressor.)
+ actually used by the compressor.) If a raw deflate was requested, then the
+ Adler-32 value is not computed and strm->adler is not set.
deflateSetDictionary returns Z_OK if success, or Z_STREAM_ERROR if a
- parameter is invalid (such as NULL dictionary) or the stream state is
+ parameter is invalid (e.g. dictionary being Z_NULL) or the stream state is
inconsistent (for example if deflate has already been called for this stream
- or if the compression method is bsort). deflateSetDictionary does not
- perform any compression: this will be done by deflate().
+ or if not at a block boundary for raw deflate). deflateSetDictionary does
+ not perform any compression: this will be done by deflate().
+*/
+
+ZEXTERN int ZEXPORT deflateGetDictionary OF((z_streamp strm,
+ Bytef *dictionary,
+ uInt *dictLength));
+/*
+ Returns the sliding dictionary being maintained by deflate. dictLength is
+ set to the number of bytes in the dictionary, and that many bytes are copied
+ to dictionary. dictionary must have enough space, where 32768 bytes is
+ always enough. If deflateGetDictionary() is called with dictionary equal to
+ Z_NULL, then only the dictionary length is returned, and nothing is copied.
+ Similary, if dictLength is Z_NULL, then it is not set.
+
+ deflateGetDictionary() may return a length less than the window size, even
+ when more than the window size in input has been provided. It may return up
+ to 258 bytes less in that case, due to how zlib's implementation of deflate
+ manages the sliding window and lookahead for matches, where matches can be
+ up to 258 bytes long. If the application needs the last window-size bytes of
+ input, then that would need to be saved by the application outside of zlib.
+
+ deflateGetDictionary returns Z_OK on success, or Z_STREAM_ERROR if the
+ stream state is inconsistent.
*/
+ZEXTERN int ZEXPORT deflateCopy OF((z_streamp dest,
+ z_streamp source));
/*
Sets the destination stream as a complete copy of the source stream.
This function can be useful when several compression strategies will be
tried, for example when there are several ways of pre-processing the input
- data with a filter. The streams that will be discarded should then be freed
+ data with a filter. The streams that will be discarded should then be freed
by calling deflateEnd. Note that deflateCopy duplicates the internal
- compression state which can be quite large, so this strategy is slow and
- can consume lots of memory.
+ compression state which can be quite large, so this strategy is slow and can
+ consume lots of memory.
deflateCopy returns Z_OK if success, Z_MEM_ERROR if there was not
enough memory, Z_STREAM_ERROR if the source stream state was inconsistent
- (such as zalloc being NULL). msg is left unchanged in both source and
+ (such as zalloc being Z_NULL). msg is left unchanged in both source and
destination.
*/
+ZEXTERN int ZEXPORT deflateReset OF((z_streamp strm));
/*
- This function is equivalent to deflateEnd followed by deflateInit,
- but does not free and reallocate all the internal compression state.
- The stream will keep the same compression level and any other attributes
- that may have been set by deflateInit2.
+ This function is equivalent to deflateEnd followed by deflateInit, but
+ does not free and reallocate the internal compression state. The stream
+ will leave the compression level and any other attributes that may have been
+ set unchanged.
- deflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source
- stream state was inconsistent (such as zalloc or state being NULL).
+ deflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source
+ stream state was inconsistent (such as zalloc or state being Z_NULL).
*/
+ZEXTERN int ZEXPORT deflateParams OF((z_streamp strm,
+ int level,
+ int strategy));
/*
Dynamically update the compression level and compression strategy. The
- interpretation of level and strategy is as in deflateInit2. This can be
+ interpretation of level and strategy is as in deflateInit2(). This can be
used to switch between compression and straight copy of the input data, or
- to switch to a different kind of input data requiring a different
- strategy. If the compression level is changed, the input available so far
- is compressed with the old level (and may be flushed); the new level will
- take effect only at the next call of deflate().
+ to switch to a different kind of input data requiring a different strategy.
+ If the compression approach (which is a function of the level) or the
+ strategy is changed, and if any input has been consumed in a previous
+ deflate() call, then the input available so far is compressed with the old
+ level and strategy using deflate(strm, Z_BLOCK). There are three approaches
+ for the compression levels 0, 1..3, and 4..9 respectively. The new level
+ and strategy will take effect at the next call of deflate().
+
+ If a deflate(strm, Z_BLOCK) is performed by deflateParams(), and it does
+ not have enough output space to complete, then the parameter change will not
+ take effect. In this case, deflateParams() can be called again with the
+ same parameters and more output space to try again.
+
+ In order to assure a change in the parameters on the first try, the
+ deflate stream should be flushed using deflate() with Z_BLOCK or other flush
+ request until strm.avail_out is not zero, before calling deflateParams().
+ Then no more input data should be provided before the deflateParams() call.
+ If this is done, the old level and strategy will be applied to the data
+ compressed before deflateParams(), and the new level and strategy will be
+ applied to the the data compressed after deflateParams().
+
+ deflateParams returns Z_OK on success, Z_STREAM_ERROR if the source stream
+ state was inconsistent or if a parameter was invalid, or Z_BUF_ERROR if
+ there was not enough output space to complete the compression of the
+ available input data before a change in the strategy or approach. Note that
+ in the case of a Z_BUF_ERROR, the parameters are not changed. A return
+ value of Z_BUF_ERROR is not fatal, in which case deflateParams() can be
+ retried with more output space.
+*/
+
+ZEXTERN int ZEXPORT deflateTune OF((z_streamp strm,
+ int good_length,
+ int max_lazy,
+ int nice_length,
+ int max_chain));
+/*
+ Fine tune deflate's internal compression parameters. This should only be
+ used by someone who understands the algorithm used by zlib's deflate for
+ searching for the best matching string, and even then only by the most
+ fanatic optimizer trying to squeeze out the last compressed bit for their
+ specific input data. Read the deflate.c source code for the meaning of the
+ max_lazy, good_length, nice_length, and max_chain parameters.
+
+ deflateTune() can be called after deflateInit() or deflateInit2(), and
+ returns Z_OK on success, or Z_STREAM_ERROR for an invalid deflate stream.
+ */
+
+ZEXTERN uLong ZEXPORT deflateBound OF((z_streamp strm,
+ uLong sourceLen));
+/*
+ deflateBound() returns an upper bound on the compressed size after
+ deflation of sourceLen bytes. It must be called after deflateInit() or
+ deflateInit2(), and after deflateSetHeader(), if used. This would be used
+ to allocate an output buffer for deflation in a single pass, and so would be
+ called before deflate(). If that first deflate() call is provided the
+ sourceLen input bytes, an output buffer allocated to the size returned by
+ deflateBound(), and the flush value Z_FINISH, then deflate() is guaranteed
+ to return Z_STREAM_END. Note that it is possible for the compressed size to
+ be larger than the value returned by deflateBound() if flush options other
+ than Z_FINISH or Z_NO_FLUSH are used.
+*/
+
+ZEXTERN int ZEXPORT deflatePending OF((z_streamp strm,
+ unsigned *pending,
+ int *bits));
+/*
+ deflatePending() returns the number of bytes and bits of output that have
+ been generated, but not yet provided in the available output. The bytes not
+ provided would be due to the available output space having being consumed.
+ The number of bits of output not provided are between 0 and 7, where they
+ await more bits to join them in order to fill out a full byte. If pending
+ or bits are Z_NULL, then those values are not set.
+
+ deflatePending returns Z_OK if success, or Z_STREAM_ERROR if the source
+ stream state was inconsistent.
+ */
- Before the call of deflateParams, the stream state must be set as for
- a call of deflate(), since the currently available input may have to
- be compressed and flushed. In particular, strm->avail_out must be non-zero.
+ZEXTERN int ZEXPORT deflatePrime OF((z_streamp strm,
+ int bits,
+ int value));
+/*
+ deflatePrime() inserts bits in the deflate output stream. The intent
+ is that this function is used to start off the deflate output with the bits
+ leftover from a previous deflate stream when appending to it. As such, this
+ function can only be used for raw deflate, and must be used before the first
+ deflate() call after a deflateInit2() or deflateReset(). bits must be less
+ than or equal to 16, and that many of the least significant bits of value
+ will be inserted in the output.
+
+ deflatePrime returns Z_OK if success, Z_BUF_ERROR if there was not enough
+ room in the internal buffer to insert the bits, or Z_STREAM_ERROR if the
+ source stream state was inconsistent.
+*/
- deflateParams returns Z_OK if success, Z_STREAM_ERROR if the source
- stream state was inconsistent or if a parameter was invalid, Z_BUF_ERROR
- if strm->avail_out was zero.
+ZEXTERN int ZEXPORT deflateSetHeader OF((z_streamp strm,
+ gz_headerp head));
+/*
+ deflateSetHeader() provides gzip header information for when a gzip
+ stream is requested by deflateInit2(). deflateSetHeader() may be called
+ after deflateInit2() or deflateReset() and before the first call of
+ deflate(). The text, time, os, extra field, name, and comment information
+ in the provided gz_header structure are written to the gzip header (xflag is
+ ignored -- the extra flags are set according to the compression level). The
+ caller must assure that, if not Z_NULL, name and comment are terminated with
+ a zero byte, and that if extra is not Z_NULL, that extra_len bytes are
+ available there. If hcrc is true, a gzip header crc is included. Note that
+ the current versions of the command-line version of gzip (up through version
+ 1.3.x) do not support header crc's, and will report that it is a "multi-part
+ gzip file" and give up.
+
+ If deflateSetHeader is not used, the default gzip header has text false,
+ the time set to zero, and os set to 255, with no extra, name, or comment
+ fields. The gzip header is returned to the default state by deflateReset().
+
+ deflateSetHeader returns Z_OK if success, or Z_STREAM_ERROR if the source
+ stream state was inconsistent.
*/
/*
-ZEXTERN(int) inflateInit2 OF((z_streamp strm,
+ZEXTERN int ZEXPORT inflateInit2 OF((z_streamp strm,
int windowBits));
- This is another version of inflateInit with an extra parameter. The
+ This is another version of inflateInit with an extra parameter. The
fields next_in, avail_in, zalloc, zfree and opaque must be initialized
before by the caller.
The windowBits parameter is the base two logarithm of the maximum window
size (the size of the history buffer). It should be in the range 8..15 for
- this version of the library. The default value is 15 if inflateInit is used
- instead. If a compressed stream with a larger window size is given as
- input, inflate() will return with the error code Z_DATA_ERROR instead of
- trying to allocate a larger window.
-
- inflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
- memory, Z_STREAM_ERROR if a parameter is invalid (such as a negative
- memLevel). msg is set to null if there is no error message. inflateInit2
- does not perform any decompression apart from reading the zlib header if
- present: this will be done by inflate(). (So next_in and avail_in may be
- modified, but next_out and avail_out are unchanged.)
+ this version of the library. The default value is 15 if inflateInit is used
+ instead. windowBits must be greater than or equal to the windowBits value
+ provided to deflateInit2() while compressing, or it must be equal to 15 if
+ deflateInit2() was not used. If a compressed stream with a larger window
+ size is given as input, inflate() will return with the error code
+ Z_DATA_ERROR instead of trying to allocate a larger window.
+
+ windowBits can also be zero to request that inflate use the window size in
+ the zlib header of the compressed stream.
+
+ windowBits can also be -8..-15 for raw inflate. In this case, -windowBits
+ determines the window size. inflate() will then process raw deflate data,
+ not looking for a zlib or gzip header, not generating a check value, and not
+ looking for any check values for comparison at the end of the stream. This
+ is for use with other formats that use the deflate compressed data format
+ such as zip. Those formats provide their own check values. If a custom
+ format is developed using the raw deflate format for compressed data, it is
+ recommended that a check value such as an Adler-32 or a CRC-32 be applied to
+ the uncompressed data as is done in the zlib, gzip, and zip formats. For
+ most applications, the zlib format should be used as is. Note that comments
+ above on the use in deflateInit2() applies to the magnitude of windowBits.
+
+ windowBits can also be greater than 15 for optional gzip decoding. Add
+ 32 to windowBits to enable zlib and gzip decoding with automatic header
+ detection, or add 16 to decode only the gzip format (the zlib format will
+ return a Z_DATA_ERROR). If a gzip stream is being decoded, strm->adler is a
+ CRC-32 instead of an Adler-32. Unlike the gunzip utility and gzread() (see
+ below), inflate() will not automatically decode concatenated gzip streams.
+ inflate() will return Z_STREAM_END at the end of the gzip stream. The state
+ would need to be reset to continue decoding a subsequent gzip stream.
+
+ inflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
+ memory, Z_VERSION_ERROR if the zlib library version is incompatible with the
+ version assumed by the caller, or Z_STREAM_ERROR if the parameters are
+ invalid, such as a null pointer to the structure. msg is set to null if
+ there is no error message. inflateInit2 does not perform any decompression
+ apart from possibly reading the zlib header if present: actual decompression
+ will be done by inflate(). (So next_in and avail_in may be modified, but
+ next_out and avail_out are unused and unchanged.) The current implementation
+ of inflateInit2() does not process any header information -- that is
+ deferred until inflate() is called.
*/
+ZEXTERN int ZEXPORT inflateSetDictionary OF((z_streamp strm,
+ const Bytef *dictionary,
+ uInt dictLength));
/*
Initializes the decompression dictionary from the given uncompressed byte
- sequence. This function must be called immediately after a call of inflate
- if this call returned Z_NEED_DICT. The dictionary chosen by the compressor
- can be determined from the Adler32 value returned by this call of
- inflate. The compressor and decompressor must use exactly the same
- dictionary (see deflateSetDictionary).
+ sequence. This function must be called immediately after a call of inflate,
+ if that call returned Z_NEED_DICT. The dictionary chosen by the compressor
+ can be determined from the Adler-32 value returned by that call of inflate.
+ The compressor and decompressor must use exactly the same dictionary (see
+ deflateSetDictionary). For raw inflate, this function can be called at any
+ time to set the dictionary. If the provided dictionary is smaller than the
+ window and there is already data in the window, then the provided dictionary
+ will amend what's there. The application must insure that the dictionary
+ that was used for compression is provided.
inflateSetDictionary returns Z_OK if success, Z_STREAM_ERROR if a
- parameter is invalid (such as NULL dictionary) or the stream state is
+ parameter is invalid (e.g. dictionary being Z_NULL) or the stream state is
inconsistent, Z_DATA_ERROR if the given dictionary doesn't match the
- expected one (incorrect Adler32 value). inflateSetDictionary does not
+ expected one (incorrect Adler-32 value). inflateSetDictionary does not
perform any decompression: this will be done by subsequent calls of
inflate().
*/
+ZEXTERN int ZEXPORT inflateGetDictionary OF((z_streamp strm,
+ Bytef *dictionary,
+ uInt *dictLength));
+/*
+ Returns the sliding dictionary being maintained by inflate. dictLength is
+ set to the number of bytes in the dictionary, and that many bytes are copied
+ to dictionary. dictionary must have enough space, where 32768 bytes is
+ always enough. If inflateGetDictionary() is called with dictionary equal to
+ Z_NULL, then only the dictionary length is returned, and nothing is copied.
+ Similary, if dictLength is Z_NULL, then it is not set.
+
+ inflateGetDictionary returns Z_OK on success, or Z_STREAM_ERROR if the
+ stream state is inconsistent.
+*/
+
+ZEXTERN int ZEXPORT inflateSync OF((z_streamp strm));
+/*
+ Skips invalid compressed data until a possible full flush point (see above
+ for the description of deflate with Z_FULL_FLUSH) can be found, or until all
+ available input is skipped. No output is provided.
+
+ inflateSync searches for a 00 00 FF FF pattern in the compressed data.
+ All full flush points have this pattern, but not all occurrences of this
+ pattern are full flush points.
+
+ inflateSync returns Z_OK if a possible full flush point has been found,
+ Z_BUF_ERROR if no more input was provided, Z_DATA_ERROR if no flush point
+ has been found, or Z_STREAM_ERROR if the stream structure was inconsistent.
+ In the success case, the application may save the current current value of
+ total_in which indicates where valid compressed data was found. In the
+ error case, the application may repeatedly call inflateSync, providing more
+ input each time, until success or end of the input data.
+*/
+
+ZEXTERN int ZEXPORT inflateCopy OF((z_streamp dest,
+ z_streamp source));
/*
- Skips invalid compressed data until a full flush point (see above the
- description of deflate with Z_FULL_FLUSH) can be found, or until all
- available input is skipped. No output is provided.
+ Sets the destination stream as a complete copy of the source stream.
+
+ This function can be useful when randomly accessing a large stream. The
+ first pass through the stream can periodically record the inflate state,
+ allowing restarting inflate at those points when randomly accessing the
+ stream.
- inflateSync returns Z_OK if a full flush point has been found, Z_BUF_ERROR
- if no more input was provided, Z_DATA_ERROR if no flush point has been found,
- or Z_STREAM_ERROR if the stream structure was inconsistent. In the success
- case, the application may save the current value of total_in which
- indicates where valid compressed data was found. In the error case, the
- application may repeatedly call inflateSync, providing more input each time,
- until success or end of the input data.
+ inflateCopy returns Z_OK if success, Z_MEM_ERROR if there was not
+ enough memory, Z_STREAM_ERROR if the source stream state was inconsistent
+ (such as zalloc being Z_NULL). msg is left unchanged in both source and
+ destination.
*/
-ZEXTERN(int) inflateReset OF((z_streamp strm));
+#endif /* !Z_FREETYPE */
+
+ZEXTERN int ZEXPORT inflateReset OF((z_streamp strm));
/*
This function is equivalent to inflateEnd followed by inflateInit,
- but does not free and reallocate all the internal decompression state.
- The stream will keep attributes that may have been set by inflateInit2.
+ but does not free and reallocate the internal decompression state. The
+ stream will keep attributes that may have been set by inflateInit2.
+
+ inflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source
+ stream state was inconsistent (such as zalloc or state being Z_NULL).
+*/
+
+ZEXTERN int ZEXPORT inflateReset2 OF((z_streamp strm,
+ int windowBits));
+/*
+ This function is the same as inflateReset, but it also permits changing
+ the wrap and window size requests. The windowBits parameter is interpreted
+ the same as it is for inflateInit2. If the window size is changed, then the
+ memory allocated for the window is freed, and the window will be reallocated
+ by inflate() if needed.
+
+ inflateReset2 returns Z_OK if success, or Z_STREAM_ERROR if the source
+ stream state was inconsistent (such as zalloc or state being Z_NULL), or if
+ the windowBits parameter is invalid.
+*/
+
+#ifndef Z_FREETYPE
+
+ZEXTERN int ZEXPORT inflatePrime OF((z_streamp strm,
+ int bits,
+ int value));
+/*
+ This function inserts bits in the inflate input stream. The intent is
+ that this function is used to start inflating at a bit position in the
+ middle of a byte. The provided bits will be used before any bytes are used
+ from next_in. This function should only be used with raw inflate, and
+ should be used before the first inflate() call after inflateInit2() or
+ inflateReset(). bits must be less than or equal to 16, and that many of the
+ least significant bits of value will be inserted in the input.
+
+ If bits is negative, then the input stream bit buffer is emptied. Then
+ inflatePrime() can be called again to put bits in the buffer. This is used
+ to clear out bits leftover after feeding inflate a block description prior
+ to feeding inflate codes.
+
+ inflatePrime returns Z_OK if success, or Z_STREAM_ERROR if the source
+ stream state was inconsistent.
+*/
+
+ZEXTERN long ZEXPORT inflateMark OF((z_streamp strm));
+/*
+ This function returns two values, one in the lower 16 bits of the return
+ value, and the other in the remaining upper bits, obtained by shifting the
+ return value down 16 bits. If the upper value is -1 and the lower value is
+ zero, then inflate() is currently decoding information outside of a block.
+ If the upper value is -1 and the lower value is non-zero, then inflate is in
+ the middle of a stored block, with the lower value equaling the number of
+ bytes from the input remaining to copy. If the upper value is not -1, then
+ it is the number of bits back from the current bit position in the input of
+ the code (literal or length/distance pair) currently being processed. In
+ that case the lower value is the number of bytes already emitted for that
+ code.
+
+ A code is being processed if inflate is waiting for more input to complete
+ decoding of the code, or if it has completed decoding but is waiting for
+ more output space to write the literal or match data.
+
+ inflateMark() is used to mark locations in the input data for random
+ access, which may be at bit positions, and to note those cases where the
+ output of a code may span boundaries of random access blocks. The current
+ location in the input stream can be determined from avail_in and data_type
+ as noted in the description for the Z_BLOCK flush parameter for inflate.
+
+ inflateMark returns the value noted above, or -65536 if the provided
+ source stream state was inconsistent.
+*/
+
+ZEXTERN int ZEXPORT inflateGetHeader OF((z_streamp strm,
+ gz_headerp head));
+/*
+ inflateGetHeader() requests that gzip header information be stored in the
+ provided gz_header structure. inflateGetHeader() may be called after
+ inflateInit2() or inflateReset(), and before the first call of inflate().
+ As inflate() processes the gzip stream, head->done is zero until the header
+ is completed, at which time head->done is set to one. If a zlib stream is
+ being decoded, then head->done is set to -1 to indicate that there will be
+ no gzip header information forthcoming. Note that Z_BLOCK or Z_TREES can be
+ used to force inflate() to return immediately after header processing is
+ complete and before any actual data is decompressed.
+
+ The text, time, xflags, and os fields are filled in with the gzip header
+ contents. hcrc is set to true if there is a header CRC. (The header CRC
+ was valid if done is set to one.) If extra is not Z_NULL, then extra_max
+ contains the maximum number of bytes to write to extra. Once done is true,
+ extra_len contains the actual extra field length, and extra contains the
+ extra field, or that field truncated if extra_max is less than extra_len.
+ If name is not Z_NULL, then up to name_max characters are written there,
+ terminated with a zero unless the length is greater than name_max. If
+ comment is not Z_NULL, then up to comm_max characters are written there,
+ terminated with a zero unless the length is greater than comm_max. When any
+ of extra, name, or comment are not Z_NULL and the respective field is not
+ present in the header, then that field is set to Z_NULL to signal its
+ absence. This allows the use of deflateSetHeader() with the returned
+ structure to duplicate the header. However if those fields are set to
+ allocated memory, then the application will need to save those pointers
+ elsewhere so that they can be eventually freed.
+
+ If inflateGetHeader is not used, then the header information is simply
+ discarded. The header is always checked for validity, including the header
+ CRC if present. inflateReset() will reset the process to discard the header
+ information. The application would need to call inflateGetHeader() again to
+ retrieve the header from the next gzip stream.
+
+ inflateGetHeader returns Z_OK if success, or Z_STREAM_ERROR if the source
+ stream state was inconsistent.
+*/
+
+#endif /* !Z_FREETYPE */
+
+/*
+ZEXTERN int ZEXPORT inflateBackInit OF((z_streamp strm, int windowBits,
+ unsigned char FAR *window));
+
+ Initialize the internal stream state for decompression using inflateBack()
+ calls. The fields zalloc, zfree and opaque in strm must be initialized
+ before the call. If zalloc and zfree are Z_NULL, then the default library-
+ derived memory allocation routines are used. windowBits is the base two
+ logarithm of the window size, in the range 8..15. window is a caller
+ supplied buffer of that size. Except for special applications where it is
+ assured that deflate was used with small window sizes, windowBits must be 15
+ and a 32K byte window must be supplied to be able to decompress general
+ deflate streams.
+
+ See inflateBack() for the usage of these routines.
+
+ inflateBackInit will return Z_OK on success, Z_STREAM_ERROR if any of
+ the parameters are invalid, Z_MEM_ERROR if the internal state could not be
+ allocated, or Z_VERSION_ERROR if the version of the library does not match
+ the version of the header file.
+*/
+
+typedef unsigned (*in_func) OF((void FAR *,
+ z_const unsigned char FAR * FAR *));
+typedef int (*out_func) OF((void FAR *, unsigned char FAR *, unsigned));
+
+#ifndef Z_FREETYPE
+
+ZEXTERN int ZEXPORT inflateBack OF((z_streamp strm,
+ in_func in, void FAR *in_desc,
+ out_func out, void FAR *out_desc));
+/*
+ inflateBack() does a raw inflate with a single call using a call-back
+ interface for input and output. This is potentially more efficient than
+ inflate() for file i/o applications, in that it avoids copying between the
+ output and the sliding window by simply making the window itself the output
+ buffer. inflate() can be faster on modern CPUs when used with large
+ buffers. inflateBack() trusts the application to not change the output
+ buffer passed by the output function, at least until inflateBack() returns.
+
+ inflateBackInit() must be called first to allocate the internal state
+ and to initialize the state with the user-provided window buffer.
+ inflateBack() may then be used multiple times to inflate a complete, raw
+ deflate stream with each call. inflateBackEnd() is then called to free the
+ allocated state.
+
+ A raw deflate stream is one with no zlib or gzip header or trailer.
+ This routine would normally be used in a utility that reads zip or gzip
+ files and writes out uncompressed files. The utility would decode the
+ header and process the trailer on its own, hence this routine expects only
+ the raw deflate stream to decompress. This is different from the default
+ behavior of inflate(), which expects a zlib header and trailer around the
+ deflate stream.
+
+ inflateBack() uses two subroutines supplied by the caller that are then
+ called by inflateBack() for input and output. inflateBack() calls those
+ routines until it reads a complete deflate stream and writes out all of the
+ uncompressed data, or until it encounters an error. The function's
+ parameters and return types are defined above in the in_func and out_func
+ typedefs. inflateBack() will call in(in_desc, &buf) which should return the
+ number of bytes of provided input, and a pointer to that input in buf. If
+ there is no input available, in() must return zero -- buf is ignored in that
+ case -- and inflateBack() will return a buffer error. inflateBack() will
+ call out(out_desc, buf, len) to write the uncompressed data buf[0..len-1].
+ out() should return zero on success, or non-zero on failure. If out()
+ returns non-zero, inflateBack() will return with an error. Neither in() nor
+ out() are permitted to change the contents of the window provided to
+ inflateBackInit(), which is also the buffer that out() uses to write from.
+ The length written by out() will be at most the window size. Any non-zero
+ amount of input may be provided by in().
+
+ For convenience, inflateBack() can be provided input on the first call by
+ setting strm->next_in and strm->avail_in. If that input is exhausted, then
+ in() will be called. Therefore strm->next_in must be initialized before
+ calling inflateBack(). If strm->next_in is Z_NULL, then in() will be called
+ immediately for input. If strm->next_in is not Z_NULL, then strm->avail_in
+ must also be initialized, and then if strm->avail_in is not zero, input will
+ initially be taken from strm->next_in[0 .. strm->avail_in - 1].
+
+ The in_desc and out_desc parameters of inflateBack() is passed as the
+ first parameter of in() and out() respectively when they are called. These
+ descriptors can be optionally used to pass any information that the caller-
+ supplied in() and out() functions need to do their job.
+
+ On return, inflateBack() will set strm->next_in and strm->avail_in to
+ pass back any unused input that was provided by the last in() call. The
+ return values of inflateBack() can be Z_STREAM_END on success, Z_BUF_ERROR
+ if in() or out() returned an error, Z_DATA_ERROR if there was a format error
+ in the deflate stream (in which case strm->msg is set to indicate the nature
+ of the error), or Z_STREAM_ERROR if the stream was not properly initialized.
+ In the case of Z_BUF_ERROR, an input or output error can be distinguished
+ using strm->next_in which will be Z_NULL only if in() returned an error. If
+ strm->next_in is not Z_NULL, then the Z_BUF_ERROR was due to out() returning
+ non-zero. (in() will always be called before out(), so strm->next_in is
+ assured to be defined if out() returns non-zero.) Note that inflateBack()
+ cannot return Z_OK.
+*/
- inflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source
- stream state was inconsistent (such as zalloc or state being NULL).
+ZEXTERN int ZEXPORT inflateBackEnd OF((z_streamp strm));
+/*
+ All memory allocated by inflateBackInit() is freed.
+
+ inflateBackEnd() returns Z_OK on success, or Z_STREAM_ERROR if the stream
+ state was inconsistent.
*/
+ZEXTERN uLong ZEXPORT zlibCompileFlags OF((void));
+/* Return flags indicating compile-time options.
+
+ Type sizes, two bits each, 00 = 16 bits, 01 = 32, 10 = 64, 11 = other:
+ 1.0: size of uInt
+ 3.2: size of uLong
+ 5.4: size of voidpf (pointer)
+ 7.6: size of z_off_t
+
+ Compiler, assembler, and debug options:
+ 8: ZLIB_DEBUG
+ 9: ASMV or ASMINF -- use ASM code
+ 10: ZLIB_WINAPI -- exported functions use the WINAPI calling convention
+ 11: 0 (reserved)
+
+ One-time table building (smaller code, but not thread-safe if true):
+ 12: BUILDFIXED -- build static block decoding tables when needed
+ 13: DYNAMIC_CRC_TABLE -- build CRC calculation tables when needed
+ 14,15: 0 (reserved)
+
+ Library content (indicates missing functionality):
+ 16: NO_GZCOMPRESS -- gz* functions cannot compress (to avoid linking
+ deflate code when not needed)
+ 17: NO_GZIP -- deflate can't write gzip streams, and inflate can't detect
+ and decode gzip streams (to avoid linking crc code)
+ 18-19: 0 (reserved)
+
+ Operation variations (changes in library functionality):
+ 20: PKZIP_BUG_WORKAROUND -- slightly more permissive inflate
+ 21: FASTEST -- deflate algorithm with only one, lowest compression level
+ 22,23: 0 (reserved)
+
+ The sprintf variant used by gzprintf (zero is best):
+ 24: 0 = vs*, 1 = s* -- 1 means limited to 20 arguments after the format
+ 25: 0 = *nprintf, 1 = *printf -- 1 means gzprintf() not secure!
+ 26: 0 = returns value, 1 = void -- 1 means inferred string length returned
+
+ Remainder:
+ 27-31: 0 (reserved)
+ */
+
+#endif /* !Z_FREETYPE */
+
+#ifndef Z_SOLO
/* utility functions */
/*
- The following utility functions are implemented on top of the
- basic stream-oriented functions. To simplify the interface, some
- default options are assumed (compression level and memory usage,
- standard memory allocation functions). The source code of these
- utility functions can easily be modified if you need special options.
+ The following utility functions are implemented on top of the basic
+ stream-oriented functions. To simplify the interface, some default options
+ are assumed (compression level and memory usage, standard memory allocation
+ functions). The source code of these utility functions can be modified if
+ you need special options.
*/
+ZEXTERN int ZEXPORT compress OF((Bytef *dest, uLongf *destLen,
+ const Bytef *source, uLong sourceLen));
/*
Compresses the source buffer into the destination buffer. sourceLen is
- the byte length of the source buffer. Upon entry, destLen is the total
- size of the destination buffer, which must be at least 0.1% larger than
- sourceLen plus 12 bytes. Upon exit, destLen is the actual size of the
- compressed buffer.
- This function can be used to compress a whole file at once if the
- input file is mmap'ed.
+ the byte length of the source buffer. Upon entry, destLen is the total size
+ of the destination buffer, which must be at least the value returned by
+ compressBound(sourceLen). Upon exit, destLen is the actual size of the
+ compressed data. compress() is equivalent to compress2() with a level
+ parameter of Z_DEFAULT_COMPRESSION.
+
compress returns Z_OK if success, Z_MEM_ERROR if there was not
enough memory, Z_BUF_ERROR if there was not enough room in the output
buffer.
*/
+ZEXTERN int ZEXPORT compress2 OF((Bytef *dest, uLongf *destLen,
+ const Bytef *source, uLong sourceLen,
+ int level));
/*
- Compresses the source buffer into the destination buffer. The level
+ Compresses the source buffer into the destination buffer. The level
parameter has the same meaning as in deflateInit. sourceLen is the byte
- length of the source buffer. Upon entry, destLen is the total size of the
- destination buffer, which must be at least 0.1% larger than sourceLen plus
- 12 bytes. Upon exit, destLen is the actual size of the compressed buffer.
+ length of the source buffer. Upon entry, destLen is the total size of the
+ destination buffer, which must be at least the value returned by
+ compressBound(sourceLen). Upon exit, destLen is the actual size of the
+ compressed data.
compress2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
memory, Z_BUF_ERROR if there was not enough room in the output buffer,
Z_STREAM_ERROR if the level parameter is invalid.
*/
+ZEXTERN uLong ZEXPORT compressBound OF((uLong sourceLen));
+/*
+ compressBound() returns an upper bound on the compressed size after
+ compress() or compress2() on sourceLen bytes. It would be used before a
+ compress() or compress2() call to allocate the destination buffer.
+*/
+
+ZEXTERN int ZEXPORT uncompress OF((Bytef *dest, uLongf *destLen,
+ const Bytef *source, uLong sourceLen));
/*
Decompresses the source buffer into the destination buffer. sourceLen is
- the byte length of the source buffer. Upon entry, destLen is the total
- size of the destination buffer, which must be large enough to hold the
- entire uncompressed data. (The size of the uncompressed data must have
- been saved previously by the compressor and transmitted to the decompressor
- by some mechanism outside the scope of this compression library.)
- Upon exit, destLen is the actual size of the compressed buffer.
- This function can be used to decompress a whole file at once if the
- input file is mmap'ed.
+ the byte length of the source buffer. Upon entry, destLen is the total size
+ of the destination buffer, which must be large enough to hold the entire
+ uncompressed data. (The size of the uncompressed data must have been saved
+ previously by the compressor and transmitted to the decompressor by some
+ mechanism outside the scope of this compression library.) Upon exit, destLen
+ is the actual size of the uncompressed data.
uncompress returns Z_OK if success, Z_MEM_ERROR if there was not
enough memory, Z_BUF_ERROR if there was not enough room in the output
- buffer, or Z_DATA_ERROR if the input data was corrupted.
+ buffer, or Z_DATA_ERROR if the input data was corrupted or incomplete. In
+ the case where there is not enough room, uncompress() will fill the output
+ buffer with the uncompressed data up to that point.
+*/
+
+ZEXTERN int ZEXPORT uncompress2 OF((Bytef *dest, uLongf *destLen,
+ const Bytef *source, uLong *sourceLen));
+/*
+ Same as uncompress, except that sourceLen is a pointer, where the
+ length of the source is *sourceLen. On return, *sourceLen is the number of
+ source bytes consumed.
+*/
+
+ /* gzip file access functions */
+
+/*
+ This library supports reading and writing files in gzip (.gz) format with
+ an interface similar to that of stdio, using the functions that start with
+ "gz". The gzip format is different from the zlib format. gzip is a gzip
+ wrapper, documented in RFC 1952, wrapped around a deflate stream.
*/
+typedef struct gzFile_s *gzFile; /* semi-opaque gzip file descriptor */
/*
- Opens a gzip (.gz) file for reading or writing. The mode parameter
- is as in fopen ("rb" or "wb") but can also include a compression level
- ("wb9") or a strategy: 'f' for filtered data as in "wb6f", 'h' for
- Huffman only compression as in "wb1h". (See the description
- of deflateInit2 for more information about the strategy parameter.)
+ZEXTERN gzFile ZEXPORT gzopen OF((const char *path, const char *mode));
+
+ Opens a gzip (.gz) file for reading or writing. The mode parameter is as
+ in fopen ("rb" or "wb") but can also include a compression level ("wb9") or
+ a strategy: 'f' for filtered data as in "wb6f", 'h' for Huffman-only
+ compression as in "wb1h", 'R' for run-length encoding as in "wb1R", or 'F'
+ for fixed code compression as in "wb9F". (See the description of
+ deflateInit2 for more information about the strategy parameter.) 'T' will
+ request transparent writing or appending with no compression and not using
+ the gzip format.
+
+ "a" can be used instead of "w" to request that the gzip stream that will
+ be written be appended to the file. "+" will result in an error, since
+ reading and writing to the same gzip file is not supported. The addition of
+ "x" when writing will create the file exclusively, which fails if the file
+ already exists. On systems that support it, the addition of "e" when
+ reading or writing will set the flag to close the file on an execve() call.
+
+ These functions, as well as gzip, will read and decode a sequence of gzip
+ streams in a file. The append function of gzopen() can be used to create
+ such a file. (Also see gzflush() for another way to do this.) When
+ appending, gzopen does not test whether the file begins with a gzip stream,
+ nor does it look for the end of the gzip streams to begin appending. gzopen
+ will simply append a gzip stream to the existing file.
gzopen can be used to read a file which is not in gzip format; in this
- case gzread will directly read from the file without decompression.
+ case gzread will directly read from the file without decompression. When
+ reading, this will be detected automatically by looking for the magic two-
+ byte gzip header.
+
+ gzopen returns NULL if the file could not be opened, if there was
+ insufficient memory to allocate the gzFile state, or if an invalid mode was
+ specified (an 'r', 'w', or 'a' was not provided, or '+' was provided).
+ errno can be checked to determine if the reason gzopen failed was that the
+ file could not be opened.
+*/
+
+ZEXTERN gzFile ZEXPORT gzdopen OF((int fd, const char *mode));
+/*
+ gzdopen associates a gzFile with the file descriptor fd. File descriptors
+ are obtained from calls like open, dup, creat, pipe or fileno (if the file
+ has been previously opened with fopen). The mode parameter is as in gzopen.
+
+ The next call of gzclose on the returned gzFile will also close the file
+ descriptor fd, just like fclose(fdopen(fd, mode)) closes the file descriptor
+ fd. If you want to keep fd open, use fd = dup(fd_keep); gz = gzdopen(fd,
+ mode);. The duplicated descriptor should be saved to avoid a leak, since
+ gzdopen does not close fd if it fails. If you are using fileno() to get the
+ file descriptor from a FILE *, then you will have to use dup() to avoid
+ double-close()ing the file descriptor. Both gzclose() and fclose() will
+ close the associated file descriptor, so they need to have different file
+ descriptors.
+
+ gzdopen returns NULL if there was insufficient memory to allocate the
+ gzFile state, if an invalid mode was specified (an 'r', 'w', or 'a' was not
+ provided, or '+' was provided), or if fd is -1. The file descriptor is not
+ used until the next gz* read, write, seek, or close operation, so gzdopen
+ will not detect if fd is invalid (unless fd is -1).
+*/
- gzopen returns NULL if the file could not be opened or if there was
- insufficient memory to allocate the (de)compression state; errno
- can be checked to distinguish the two cases (if errno is zero, the
- zlib error is Z_MEM_ERROR). */
+ZEXTERN int ZEXPORT gzbuffer OF((gzFile file, unsigned size));
+/*
+ Set the internal buffer size used by this library's functions. The
+ default buffer size is 8192 bytes. This function must be called after
+ gzopen() or gzdopen(), and before any other calls that read or write the
+ file. The buffer memory allocation is always deferred to the first read or
+ write. Three times that size in buffer space is allocated. A larger buffer
+ size of, for example, 64K or 128K bytes will noticeably increase the speed
+ of decompression (reading).
+
+ The new buffer size also affects the maximum length for gzprintf().
+
+ gzbuffer() returns 0 on success, or -1 on failure, such as being called
+ too late.
+*/
+ZEXTERN int ZEXPORT gzsetparams OF((gzFile file, int level, int strategy));
/*
- gzdopen() associates a gzFile with the file descriptor fd. File
- descriptors are obtained from calls like open, dup, creat, pipe or
- fileno (in the file has been previously opened with fopen).
- The mode parameter is as in gzopen.
- The next call of gzclose on the returned gzFile will also close the
- file descriptor fd, just like fclose(fdopen(fd), mode) closes the file
- descriptor fd. If you want to keep fd open, use gzdopen(dup(fd), mode).
- gzdopen returns NULL if there was insufficient memory to allocate
- the (de)compression state.
+ Dynamically update the compression level or strategy. See the description
+ of deflateInit2 for the meaning of these parameters. Previously provided
+ data is flushed before the parameter change.
+
+ gzsetparams returns Z_OK if success, Z_STREAM_ERROR if the file was not
+ opened for writing, Z_ERRNO if there is an error writing the flushed data,
+ or Z_MEM_ERROR if there is a memory allocation error.
*/
+ZEXTERN int ZEXPORT gzread OF((gzFile file, voidp buf, unsigned len));
/*
- Dynamically update the compression level or strategy. See the description
- of deflateInit2 for the meaning of these parameters.
- gzsetparams returns Z_OK if success, or Z_STREAM_ERROR if the file was not
- opened for writing.
+ Reads the given number of uncompressed bytes from the compressed file. If
+ the input file is not in gzip format, gzread copies the given number of
+ bytes into the buffer directly from the file.
+
+ After reaching the end of a gzip stream in the input, gzread will continue
+ to read, looking for another gzip stream. Any number of gzip streams may be
+ concatenated in the input file, and will all be decompressed by gzread().
+ If something other than a gzip stream is encountered after a gzip stream,
+ that remaining trailing garbage is ignored (and no error is returned).
+
+ gzread can be used to read a gzip file that is being concurrently written.
+ Upon reaching the end of the input, gzread will return with the available
+ data. If the error code returned by gzerror is Z_OK or Z_BUF_ERROR, then
+ gzclearerr can be used to clear the end of file indicator in order to permit
+ gzread to be tried again. Z_OK indicates that a gzip stream was completed
+ on the last gzread. Z_BUF_ERROR indicates that the input file ended in the
+ middle of a gzip stream. Note that gzread does not return -1 in the event
+ of an incomplete gzip stream. This error is deferred until gzclose(), which
+ will return Z_BUF_ERROR if the last gzread ended in the middle of a gzip
+ stream. Alternatively, gzerror can be used before gzclose to detect this
+ case.
+
+ gzread returns the number of uncompressed bytes actually read, less than
+ len for end of file, or -1 for error. If len is too large to fit in an int,
+ then nothing is read, -1 is returned, and the error state is set to
+ Z_STREAM_ERROR.
*/
+ZEXTERN z_size_t ZEXPORT gzfread OF((voidp buf, z_size_t size, z_size_t nitems,
+ gzFile file));
/*
- Reads the given number of uncompressed bytes from the compressed file.
- If the input file was not in gzip format, gzread copies the given number
- of bytes into the buffer.
- gzread returns the number of uncompressed bytes actually read (0 for
- end of file, -1 for error). */
+ Read up to nitems items of size size from file to buf, otherwise operating
+ as gzread() does. This duplicates the interface of stdio's fread(), with
+ size_t request and return types. If the library defines size_t, then
+ z_size_t is identical to size_t. If not, then z_size_t is an unsigned
+ integer type that can contain a pointer.
+
+ gzfread() returns the number of full items read of size size, or zero if
+ the end of the file was reached and a full item could not be read, or if
+ there was an error. gzerror() must be consulted if zero is returned in
+ order to determine if there was an error. If the multiplication of size and
+ nitems overflows, i.e. the product does not fit in a z_size_t, then nothing
+ is read, zero is returned, and the error state is set to Z_STREAM_ERROR.
+
+ In the event that the end of file is reached and only a partial item is
+ available at the end, i.e. the remaining uncompressed data length is not a
+ multiple of size, then the final partial item is nevetheless read into buf
+ and the end-of-file flag is set. The length of the partial item read is not
+ provided, but could be inferred from the result of gztell(). This behavior
+ is the same as the behavior of fread() implementations in common libraries,
+ but it prevents the direct use of gzfread() to read a concurrently written
+ file, reseting and retrying on end-of-file, when size is not 1.
+*/
+ZEXTERN int ZEXPORT gzwrite OF((gzFile file,
+ voidpc buf, unsigned len));
/*
Writes the given number of uncompressed bytes into the compressed file.
- gzwrite returns the number of uncompressed bytes actually written
- (0 in case of error).
+ gzwrite returns the number of uncompressed bytes written or 0 in case of
+ error.
+*/
+
+ZEXTERN z_size_t ZEXPORT gzfwrite OF((voidpc buf, z_size_t size,
+ z_size_t nitems, gzFile file));
+/*
+ gzfwrite() writes nitems items of size size from buf to file, duplicating
+ the interface of stdio's fwrite(), with size_t request and return types. If
+ the library defines size_t, then z_size_t is identical to size_t. If not,
+ then z_size_t is an unsigned integer type that can contain a pointer.
+
+ gzfwrite() returns the number of full items written of size size, or zero
+ if there was an error. If the multiplication of size and nitems overflows,
+ i.e. the product does not fit in a z_size_t, then nothing is written, zero
+ is returned, and the error state is set to Z_STREAM_ERROR.
*/
+ZEXTERN int ZEXPORTVA gzprintf Z_ARG((gzFile file, const char *format, ...));
/*
- Converts, formats, and writes the args to the compressed file under
- control of the format string, as in fprintf. gzprintf returns the number of
- uncompressed bytes actually written (0 in case of error).
+ Converts, formats, and writes the arguments to the compressed file under
+ control of the format string, as in fprintf. gzprintf returns the number of
+ uncompressed bytes actually written, or a negative zlib error code in case
+ of error. The number of uncompressed bytes written is limited to 8191, or
+ one less than the buffer size given to gzbuffer(). The caller should assure
+ that this limit is not exceeded. If it is exceeded, then gzprintf() will
+ return an error (0) with nothing written. In this case, there may also be a
+ buffer overflow with unpredictable consequences, which is possible only if
+ zlib was compiled with the insecure functions sprintf() or vsprintf()
+ because the secure snprintf() or vsnprintf() functions were not available.
+ This can be determined using zlibCompileFlags().
*/
+ZEXTERN int ZEXPORT gzputs OF((gzFile file, const char *s));
/*
- Writes the given null-terminated string to the compressed file, excluding
+ Writes the given null-terminated string to the compressed file, excluding
the terminating null character.
- gzputs returns the number of characters written, or -1 in case of error.
+
+ gzputs returns the number of characters written, or -1 in case of error.
+*/
+
+ZEXTERN char * ZEXPORT gzgets OF((gzFile file, char *buf, int len));
+/*
+ Reads bytes from the compressed file until len-1 characters are read, or a
+ newline character is read and transferred to buf, or an end-of-file
+ condition is encountered. If any characters are read or if len == 1, the
+ string is terminated with a null character. If no characters are read due
+ to an end-of-file or len < 1, then the buffer is left untouched.
+
+ gzgets returns buf which is a null-terminated string, or it returns NULL
+ for end-of-file or in case of error. If there was an error, the contents at
+ buf are indeterminate.
*/
+ZEXTERN int ZEXPORT gzputc OF((gzFile file, int c));
/*
- Reads bytes from the compressed file until len-1 characters are read, or
- a newline character is read and transferred to buf, or an end-of-file
- condition is encountered. The string is then terminated with a null
- character.
- gzgets returns buf, or Z_NULL in case of error.
+ Writes c, converted to an unsigned char, into the compressed file. gzputc
+ returns the value that was written, or -1 in case of error.
*/
+ZEXTERN int ZEXPORT gzgetc OF((gzFile file));
/*
- Writes c, converted to an unsigned char, into the compressed file.
- gzputc returns the value that was written, or -1 in case of error.
+ Reads one byte from the compressed file. gzgetc returns this byte or -1
+ in case of end of file or error. This is implemented as a macro for speed.
+ As such, it does not do all of the checking the other functions do. I.e.
+ it does not check to see if file is NULL, nor whether the structure file
+ points to has been clobbered or not.
*/
+ZEXTERN int ZEXPORT gzungetc OF((int c, gzFile file));
/*
- Reads one byte from the compressed file. gzgetc returns this byte
- or -1 in case of end of file or error.
+ Push one character back onto the stream to be read as the first character
+ on the next read. At least one character of push-back is allowed.
+ gzungetc() returns the character pushed, or -1 on failure. gzungetc() will
+ fail if c is -1, and may fail if a character has been pushed but not read
+ yet. If gzungetc is used immediately after gzopen or gzdopen, at least the
+ output buffer size of pushed characters is allowed. (See gzbuffer above.)
+ The pushed character will be discarded if the stream is repositioned with
+ gzseek() or gzrewind().
*/
+ZEXTERN int ZEXPORT gzflush OF((gzFile file, int flush));
/*
- Flushes all pending output into the compressed file. The parameter
- flush is as in the deflate() function. The return value is the zlib
- error number (see function gzerror below). gzflush returns Z_OK if
- the flush parameter is Z_FINISH and all output could be flushed.
- gzflush should be called only when strictly necessary because it can
- degrade compression.
+ Flushes all pending output into the compressed file. The parameter flush
+ is as in the deflate() function. The return value is the zlib error number
+ (see function gzerror below). gzflush is only permitted when writing.
+
+ If the flush parameter is Z_FINISH, the remaining data is written and the
+ gzip stream is completed in the output. If gzwrite() is called again, a new
+ gzip stream will be started in the output. gzread() is able to read such
+ concatenated gzip streams.
+
+ gzflush should be called only when strictly necessary because it will
+ degrade compression if called too often.
*/
/*
- Sets the starting position for the next gzread or gzwrite on the
- given compressed file. The offset represents a number of bytes in the
- uncompressed data stream. The whence parameter is defined as in lseek(2);
+ZEXTERN z_off_t ZEXPORT gzseek OF((gzFile file,
+ z_off_t offset, int whence));
+
+ Sets the starting position for the next gzread or gzwrite on the given
+ compressed file. The offset represents a number of bytes in the
+ uncompressed data stream. The whence parameter is defined as in lseek(2);
the value SEEK_END is not supported.
+
If the file is opened for reading, this function is emulated but can be
- extremely slow. If the file is opened for writing, only forward seeks are
+ extremely slow. If the file is opened for writing, only forward seeks are
supported; gzseek then compresses a sequence of zeroes up to the new
starting position.
- gzseek returns the resulting offset location as measured in bytes from
+ gzseek returns the resulting offset location as measured in bytes from
the beginning of the uncompressed stream, or -1 in case of error, in
particular if the file is opened for writing and the new starting position
would be before the current position.
*/
+ZEXTERN int ZEXPORT gzrewind OF((gzFile file));
/*
Rewinds the given file. This function is supported only for reading.
- gzrewind(file) is equivalent to (int)gzseek(file, 0L, SEEK_SET)
+ gzrewind(file) is equivalent to (int)gzseek(file, 0L, SEEK_SET)
+*/
+
+/*
+ZEXTERN z_off_t ZEXPORT gztell OF((gzFile file));
+
+ Returns the starting position for the next gzread or gzwrite on the given
+ compressed file. This position represents a number of bytes in the
+ uncompressed data stream, and is zero when starting, even if appending or
+ reading a gzip stream from the middle of a file using gzdopen().
+
+ gztell(file) is equivalent to gzseek(file, 0L, SEEK_CUR)
*/
/*
- Returns the starting position for the next gzread or gzwrite on the
- given compressed file. This position represents a number of bytes in the
- uncompressed data stream.
+ZEXTERN z_off_t ZEXPORT gzoffset OF((gzFile file));
- gztell(file) is equivalent to gzseek(file, 0L, SEEK_CUR)
+ Returns the current offset in the file being read or written. This offset
+ includes the count of bytes that precede the gzip stream, for example when
+ appending or when using gzdopen() for reading. When reading, the offset
+ does not include as yet unused buffered input. This information can be used
+ for a progress indicator. On error, gzoffset() returns -1.
*/
+ZEXTERN int ZEXPORT gzeof OF((gzFile file));
/*
- Returns 1 when EOF has previously been detected reading the given
- input stream, otherwise zero.
+ Returns true (1) if the end-of-file indicator has been set while reading,
+ false (0) otherwise. Note that the end-of-file indicator is set only if the
+ read tried to go past the end of the input, but came up short. Therefore,
+ just like feof(), gzeof() may return false even if there is no more data to
+ read, in the event that the last read request was for the exact number of
+ bytes remaining in the input file. This will happen if the input file size
+ is an exact multiple of the buffer size.
+
+ If gzeof() returns true, then the read functions will return no more data,
+ unless the end-of-file indicator is reset by gzclearerr() and the input file
+ has grown since the previous end of file was detected.
*/
+ZEXTERN int ZEXPORT gzdirect OF((gzFile file));
/*
- Flushes all pending output if necessary, closes the compressed file
- and deallocates all the (de)compression state. The return value is the zlib
- error number (see function gzerror below).
+ Returns true (1) if file is being copied directly while reading, or false
+ (0) if file is a gzip stream being decompressed.
+
+ If the input file is empty, gzdirect() will return true, since the input
+ does not contain a gzip stream.
+
+ If gzdirect() is used immediately after gzopen() or gzdopen() it will
+ cause buffers to be allocated to allow reading the file to determine if it
+ is a gzip file. Therefore if gzbuffer() is used, it should be called before
+ gzdirect().
+
+ When writing, gzdirect() returns true (1) if transparent writing was
+ requested ("wT" for the gzopen() mode), or false (0) otherwise. (Note:
+ gzdirect() is not needed when writing. Transparent writing must be
+ explicitly requested, so the application already knows the answer. When
+ linking statically, using gzdirect() will include all of the zlib code for
+ gzip file reading and decompression, which may not be desired.)
*/
+ZEXTERN int ZEXPORT gzclose OF((gzFile file));
/*
- Returns the error message for the last error which occurred on the
- given compressed file. errnum is set to zlib error number. If an
- error occurred in the file system and not in the compression library,
- errnum is set to Z_ERRNO and the application may consult errno
- to get the exact error code.
+ Flushes all pending output if necessary, closes the compressed file and
+ deallocates the (de)compression state. Note that once file is closed, you
+ cannot call gzerror with file, since its structures have been deallocated.
+ gzclose must not be called more than once on the same file, just as free
+ must not be called more than once on the same allocation.
+
+ gzclose will return Z_STREAM_ERROR if file is not valid, Z_ERRNO on a
+ file operation error, Z_MEM_ERROR if out of memory, Z_BUF_ERROR if the
+ last read ended in the middle of a gzip stream, or Z_OK on success.
*/
+ZEXTERN int ZEXPORT gzclose_r OF((gzFile file));
+ZEXTERN int ZEXPORT gzclose_w OF((gzFile file));
+/*
+ Same as gzclose(), but gzclose_r() is only for use when reading, and
+ gzclose_w() is only for use when writing or appending. The advantage to
+ using these instead of gzclose() is that they avoid linking in zlib
+ compression or decompression code that is not used when only reading or only
+ writing respectively. If gzclose() is used, then both compression and
+ decompression code will be included the application when linking to a static
+ zlib library.
+*/
+
+ZEXTERN const char * ZEXPORT gzerror OF((gzFile file, int *errnum));
+/*
+ Returns the error message for the last error which occurred on the given
+ compressed file. errnum is set to zlib error number. If an error occurred
+ in the file system and not in the compression library, errnum is set to
+ Z_ERRNO and the application may consult errno to get the exact error code.
+
+ The application must not modify the returned string. Future calls to
+ this function may invalidate the previously returned string. If file is
+ closed, then the string previously returned by gzerror will no longer be
+ available.
+
+ gzerror() should be used to distinguish errors from end-of-file for those
+ functions above that do not distinguish those cases in their return values.
+*/
+
+ZEXTERN void ZEXPORT gzclearerr OF((gzFile file));
+/*
+ Clears the error and end-of-file flags for file. This is analogous to the
+ clearerr() function in stdio. This is useful for continuing to read a gzip
+ file that is being written concurrently.
+*/
+
+#endif /* !Z_SOLO */
+
/* checksum functions */
/*
These functions are not related to compression but are exported
- anyway because they might be useful in applications using the
- compression library.
+ anyway because they might be useful in applications using the compression
+ library.
*/
-ZEXTERN(uLong) adler32 OF((uLong adler, const Bytef *buf, uInt len));
-
+ZEXTERN uLong ZEXPORT adler32 OF((uLong adler, const Bytef *buf, uInt len));
/*
Update a running Adler-32 checksum with the bytes buf[0..len-1] and
- return the updated checksum. If buf is NULL, this function returns
- the required initial value for the checksum.
- An Adler-32 checksum is almost as reliable as a CRC32 but can be computed
- much faster. Usage example:
+ return the updated checksum. If buf is Z_NULL, this function returns the
+ required initial value for the checksum.
+
+ An Adler-32 checksum is almost as reliable as a CRC-32 but can be computed
+ much faster.
+
+ Usage example:
uLong adler = adler32(0L, Z_NULL, 0);
@@ -789,11 +1718,31 @@ ZEXTERN(uLong) adler32 OF((uLong adler, const Bytef *buf, uInt len));
if (adler != original_adler) error();
*/
+ZEXTERN uLong ZEXPORT adler32_z OF((uLong adler, const Bytef *buf,
+ z_size_t len));
+/*
+ Same as adler32(), but with a size_t length.
+*/
+
+/*
+ZEXTERN uLong ZEXPORT adler32_combine OF((uLong adler1, uLong adler2,
+ z_off_t len2));
+
+ Combine two Adler-32 checksums into one. For two sequences of bytes, seq1
+ and seq2 with lengths len1 and len2, Adler-32 checksums were calculated for
+ each, adler1 and adler2. adler32_combine() returns the Adler-32 checksum of
+ seq1 and seq2 concatenated, requiring only adler1, adler2, and len2. Note
+ that the z_off_t type (like off_t) is a signed integer. If len2 is
+ negative, the result has no meaning or utility.
+*/
+
+ZEXTERN uLong ZEXPORT crc32 OF((uLong crc, const Bytef *buf, uInt len));
/*
- Update a running crc with the bytes buf[0..len-1] and return the updated
- crc. If buf is NULL, this function returns the required initial value
- for the crc. Pre- and post-conditioning (one's complement) is performed
- within this function so it shouldn't be done by the application.
+ Update a running CRC-32 with the bytes buf[0..len-1] and return the
+ updated CRC-32. If buf is Z_NULL, this function returns the required
+ initial value for the crc. Pre- and post-conditioning (one's complement) is
+ performed within this function so it shouldn't be done by the application.
+
Usage example:
uLong crc = crc32(0L, Z_NULL, 0);
@@ -804,27 +1753,193 @@ ZEXTERN(uLong) adler32 OF((uLong adler, const Bytef *buf, uInt len));
if (crc != original_crc) error();
*/
+#ifndef Z_FREETYPE
+
+ZEXTERN uLong ZEXPORT crc32_z OF((uLong adler, const Bytef *buf,
+ z_size_t len));
+/*
+ Same as crc32(), but with a size_t length.
+*/
+
+/*
+ZEXTERN uLong ZEXPORT crc32_combine OF((uLong crc1, uLong crc2, z_off_t len2));
+
+ Combine two CRC-32 check values into one. For two sequences of bytes,
+ seq1 and seq2 with lengths len1 and len2, CRC-32 check values were
+ calculated for each, crc1 and crc2. crc32_combine() returns the CRC-32
+ check value of seq1 and seq2 concatenated, requiring only crc1, crc2, and
+ len2.
+*/
/* various hacks, don't look :) */
/* deflateInit and inflateInit are macros to allow checking the zlib version
* and the compiler's view of z_stream:
*/
-ZEXTERN(int) inflateInit2_ OF((z_streamp strm, int windowBits,
+ZEXTERN int ZEXPORT deflateInit_ OF((z_streamp strm, int level,
+ const char *version, int stream_size));
+
+ZEXTERN int ZEXPORT inflateInit_ OF((z_streamp strm,
+ const char *version, int stream_size));
+ZEXTERN int ZEXPORT deflateInit2_ OF((z_streamp strm, int level, int method,
+ int windowBits, int memLevel,
+ int strategy, const char *version,
+ int stream_size));
+ZEXTERN int ZEXPORT inflateInit2_ OF((z_streamp strm, int windowBits,
+ const char *version, int stream_size));
+ZEXTERN int ZEXPORT inflateBackInit_ OF((z_streamp strm, int windowBits,
+ unsigned char FAR *window,
+ const char *version,
+ int stream_size));
+#ifdef Z_PREFIX_SET
+# define z_deflateInit(strm, level) \
+ deflateInit_((strm), (level), ZLIB_VERSION, (int)sizeof(z_stream))
+# define z_inflateInit(strm) \
+ inflateInit_((strm), ZLIB_VERSION, (int)sizeof(z_stream))
+# define z_deflateInit2(strm, level, method, windowBits, memLevel, strategy) \
+ deflateInit2_((strm),(level),(method),(windowBits),(memLevel),\
+ (strategy), ZLIB_VERSION, (int)sizeof(z_stream))
+# define z_inflateInit2(strm, windowBits) \
+ inflateInit2_((strm), (windowBits), ZLIB_VERSION, \
+ (int)sizeof(z_stream))
+# define z_inflateBackInit(strm, windowBits, window) \
+ inflateBackInit_((strm), (windowBits), (window), \
+ ZLIB_VERSION, (int)sizeof(z_stream))
+#else
+# define deflateInit(strm, level) \
+ deflateInit_((strm), (level), ZLIB_VERSION, (int)sizeof(z_stream))
+# define inflateInit(strm) \
+ inflateInit_((strm), ZLIB_VERSION, (int)sizeof(z_stream))
+# define deflateInit2(strm, level, method, windowBits, memLevel, strategy) \
+ deflateInit2_((strm),(level),(method),(windowBits),(memLevel),\
+ (strategy), ZLIB_VERSION, (int)sizeof(z_stream))
+# define inflateInit2(strm, windowBits) \
+ inflateInit2_((strm), (windowBits), ZLIB_VERSION, \
+ (int)sizeof(z_stream))
+# define inflateBackInit(strm, windowBits, window) \
+ inflateBackInit_((strm), (windowBits), (window), \
+ ZLIB_VERSION, (int)sizeof(z_stream))
+#endif
+
+#else /* Z_FREETYPE */
+
+
+ZEXTERN int ZEXPORT inflateInit2_ OF((z_streamp strm, int windowBits,
const char *version, int stream_size));
-#define deflateInit(strm, level) \
- deflateInit_((strm), (level), ZLIB_VERSION, sizeof(z_stream))
-#define inflateInit(strm) \
- inflateInit_((strm), ZLIB_VERSION, sizeof(z_stream))
-#define deflateInit2(strm, level, method, windowBits, memLevel, strategy) \
- deflateInit2_((strm),(level),(method),(windowBits),(memLevel),\
- (strategy), ZLIB_VERSION, sizeof(z_stream))
-#define inflateInit2(strm, windowBits) \
- inflateInit2_((strm), (windowBits), ZLIB_VERSION, sizeof(z_stream))
+# define inflateInit2(strm, windowBits) \
+ inflateInit2_((strm), (windowBits), ZLIB_VERSION, \
+ (int)sizeof(z_stream))
+
+#endif /* Z_FREETYPE */
+
+
+#ifndef Z_SOLO
+
+/* gzgetc() macro and its supporting function and exposed data structure. Note
+ * that the real internal state is much larger than the exposed structure.
+ * This abbreviated structure exposes just enough for the gzgetc() macro. The
+ * user should not mess with these exposed elements, since their names or
+ * behavior could change in the future, perhaps even capriciously. They can
+ * only be used by the gzgetc() macro. You have been warned.
+ */
+struct gzFile_s {
+ unsigned have;
+ unsigned char *next;
+ z_off64_t pos;
+};
+ZEXTERN int ZEXPORT gzgetc_ OF((gzFile file)); /* backward compatibility */
+#ifdef Z_PREFIX_SET
+# undef z_gzgetc
+# define z_gzgetc(g) \
+ ((g)->have ? ((g)->have--, (g)->pos++, *((g)->next)++) : (gzgetc)(g))
+#else
+# define gzgetc(g) \
+ ((g)->have ? ((g)->have--, (g)->pos++, *((g)->next)++) : (gzgetc)(g))
+#endif
+
+/* provide 64-bit offset functions if _LARGEFILE64_SOURCE defined, and/or
+ * change the regular functions to 64 bits if _FILE_OFFSET_BITS is 64 (if
+ * both are true, the application gets the *64 functions, and the regular
+ * functions are changed to 64 bits) -- in case these are set on systems
+ * without large file support, _LFS64_LARGEFILE must also be true
+ */
+#ifdef Z_LARGE64
+ ZEXTERN gzFile ZEXPORT gzopen64 OF((const char *, const char *));
+ ZEXTERN z_off64_t ZEXPORT gzseek64 OF((gzFile, z_off64_t, int));
+ ZEXTERN z_off64_t ZEXPORT gztell64 OF((gzFile));
+ ZEXTERN z_off64_t ZEXPORT gzoffset64 OF((gzFile));
+ ZEXTERN uLong ZEXPORT adler32_combine64 OF((uLong, uLong, z_off64_t));
+ ZEXTERN uLong ZEXPORT crc32_combine64 OF((uLong, uLong, z_off64_t));
+#endif
+
+#if !defined(ZLIB_INTERNAL) && defined(Z_WANT64)
+# ifdef Z_PREFIX_SET
+# define z_gzopen z_gzopen64
+# define z_gzseek z_gzseek64
+# define z_gztell z_gztell64
+# define z_gzoffset z_gzoffset64
+# define z_adler32_combine z_adler32_combine64
+# define z_crc32_combine z_crc32_combine64
+# else
+# define gzopen gzopen64
+# define gzseek gzseek64
+# define gztell gztell64
+# define gzoffset gzoffset64
+# define adler32_combine adler32_combine64
+# define crc32_combine crc32_combine64
+# endif
+# ifndef Z_LARGE64
+ ZEXTERN gzFile ZEXPORT gzopen64 OF((const char *, const char *));
+ ZEXTERN z_off_t ZEXPORT gzseek64 OF((gzFile, z_off_t, int));
+ ZEXTERN z_off_t ZEXPORT gztell64 OF((gzFile));
+ ZEXTERN z_off_t ZEXPORT gzoffset64 OF((gzFile));
+ ZEXTERN uLong ZEXPORT adler32_combine64 OF((uLong, uLong, z_off_t));
+ ZEXTERN uLong ZEXPORT crc32_combine64 OF((uLong, uLong, z_off_t));
+# endif
+#else
+ ZEXTERN gzFile ZEXPORT gzopen OF((const char *, const char *));
+ ZEXTERN z_off_t ZEXPORT gzseek OF((gzFile, z_off_t, int));
+ ZEXTERN z_off_t ZEXPORT gztell OF((gzFile));
+ ZEXTERN z_off_t ZEXPORT gzoffset OF((gzFile));
+ ZEXTERN uLong ZEXPORT adler32_combine OF((uLong, uLong, z_off_t));
+ ZEXTERN uLong ZEXPORT crc32_combine OF((uLong, uLong, z_off_t));
+#endif
+
+#else /* Z_SOLO */
+
+#ifndef Z_FREETYPE
+ ZEXTERN uLong ZEXPORT adler32_combine OF((uLong, uLong, z_off_t));
+ ZEXTERN uLong ZEXPORT crc32_combine OF((uLong, uLong, z_off_t));
+#endif
+
+#endif /* !Z_SOLO */
+
+/* undocumented functions */
+#ifndef Z_FREETYPE
+ZEXTERN const char * ZEXPORT zError OF((int));
+ZEXTERN int ZEXPORT inflateSyncPoint OF((z_streamp));
+ZEXTERN const z_crc_t FAR * ZEXPORT get_crc_table OF((void));
+ZEXTERN int ZEXPORT inflateUndermine OF((z_streamp, int));
+ZEXTERN int ZEXPORT inflateValidate OF((z_streamp, int));
+ZEXTERN unsigned long ZEXPORT inflateCodesUsed OF ((z_streamp));
+ZEXTERN int ZEXPORT inflateResetKeep OF((z_streamp));
+ZEXTERN int ZEXPORT deflateResetKeep OF((z_streamp));
+#if (defined(_WIN32) || defined(__CYGWIN__)) && !defined(Z_SOLO)
+ZEXTERN gzFile ZEXPORT gzopen_w OF((const wchar_t *path,
+ const char *mode));
+#endif
+#if defined(STDC) || defined(Z_HAVE_STDARG_H)
+# ifndef Z_SOLO
+ZEXTERN int ZEXPORTVA gzvprintf Z_ARG((gzFile file,
+ const char *format,
+ va_list va));
+# endif
+#endif
+#endif /* !Z_FREETYPE */
#ifdef __cplusplus
}
#endif
-#endif /* _ZLIB_H */
+#endif /* ZLIB_H */
diff --git a/src/gzip/zutil.c b/src/gzip/zutil.c
index 7ad0c1f..ff06651 100644
--- a/src/gzip/zutil.c
+++ b/src/gzip/zutil.c
@@ -1,23 +1,155 @@
/* zutil.c -- target dependent utility functions for the compression library
- * Copyright (C) 1995-2002 Jean-loup Gailly.
+ * Copyright (C) 1995-2017 Jean-loup Gailly
* For conditions of distribution and use, see copyright notice in zlib.h
*/
/* @(#) $Id$ */
#include "zutil.h"
+#ifndef Z_SOLO
+# include "gzguts.h"
+#endif
-#ifndef STDC
-extern void exit OF((int));
+z_const char * const z_errmsg[10] = {
+ (z_const char *)"need dictionary", /* Z_NEED_DICT 2 */
+ (z_const char *)"stream end", /* Z_STREAM_END 1 */
+ (z_const char *)"", /* Z_OK 0 */
+ (z_const char *)"file error", /* Z_ERRNO (-1) */
+ (z_const char *)"stream error", /* Z_STREAM_ERROR (-2) */
+ (z_const char *)"data error", /* Z_DATA_ERROR (-3) */
+ (z_const char *)"insufficient memory", /* Z_MEM_ERROR (-4) */
+ (z_const char *)"buffer error", /* Z_BUF_ERROR (-5) */
+ (z_const char *)"incompatible version",/* Z_VERSION_ERROR (-6) */
+ (z_const char *)""
+};
+
+
+const char * ZEXPORT zlibVersion()
+{
+ return ZLIB_VERSION;
+}
+
+uLong ZEXPORT zlibCompileFlags()
+{
+ uLong flags;
+
+ flags = 0;
+ switch ((int)(sizeof(uInt))) {
+ case 2: break;
+ case 4: flags += 1; break;
+ case 8: flags += 2; break;
+ default: flags += 3;
+ }
+ switch ((int)(sizeof(uLong))) {
+ case 2: break;
+ case 4: flags += 1 << 2; break;
+ case 8: flags += 2 << 2; break;
+ default: flags += 3 << 2;
+ }
+ switch ((int)(sizeof(voidpf))) {
+ case 2: break;
+ case 4: flags += 1 << 4; break;
+ case 8: flags += 2 << 4; break;
+ default: flags += 3 << 4;
+ }
+ switch ((int)(sizeof(z_off_t))) {
+ case 2: break;
+ case 4: flags += 1 << 6; break;
+ case 8: flags += 2 << 6; break;
+ default: flags += 3 << 6;
+ }
+#ifdef ZLIB_DEBUG
+ flags += 1 << 8;
+#endif
+#if defined(ASMV) || defined(ASMINF)
+ flags += 1 << 9;
+#endif
+#ifdef ZLIB_WINAPI
+ flags += 1 << 10;
+#endif
+#ifdef BUILDFIXED
+ flags += 1 << 12;
+#endif
+#ifdef DYNAMIC_CRC_TABLE
+ flags += 1 << 13;
+#endif
+#ifdef NO_GZCOMPRESS
+ flags += 1L << 16;
+#endif
+#ifdef NO_GZIP
+ flags += 1L << 17;
+#endif
+#ifdef PKZIP_BUG_WORKAROUND
+ flags += 1L << 20;
+#endif
+#ifdef FASTEST
+ flags += 1L << 21;
+#endif
+#if defined(STDC) || defined(Z_HAVE_STDARG_H)
+# ifdef NO_vsnprintf
+ flags += 1L << 25;
+# ifdef HAS_vsprintf_void
+ flags += 1L << 26;
+# endif
+# else
+# ifdef HAS_vsnprintf_void
+ flags += 1L << 26;
+# endif
+# endif
+#else
+ flags += 1L << 24;
+# ifdef NO_snprintf
+ flags += 1L << 25;
+# ifdef HAS_sprintf_void
+ flags += 1L << 26;
+# endif
+# else
+# ifdef HAS_snprintf_void
+ flags += 1L << 26;
+# endif
+# endif
+#endif
+ return flags;
+}
+
+#ifdef ZLIB_DEBUG
+#include <stdlib.h>
+# ifndef verbose
+# define verbose 0
+# endif
+int ZLIB_INTERNAL z_verbose = verbose;
+
+void ZLIB_INTERNAL z_error (
+ char *m)
+{
+ fprintf(stderr, "%s\n", m);
+ exit(1);
+}
#endif
+/* exported to allow conversion of error code to string for compress() and
+ * uncompress()
+ */
+const char * ZEXPORT zError(
+ int err)
+{
+ return ERR_MSG(err);
+}
+
+#if defined(_WIN32_WCE)
+ /* The Microsoft C Run-Time Library for Windows CE doesn't have
+ * errno. We define it as a global variable to simplify porting.
+ * Its value is always 0 and should not be used.
+ */
+ int errno = 0;
+#endif
#ifndef HAVE_MEMCPY
-void zmemcpy(dest, source, len)
- Bytef* dest;
- const Bytef* source;
- uInt len;
+void ZLIB_INTERNAL zmemcpy(
+ Bytef* dest,
+ const Bytef* source,
+ uInt len)
{
if (len == 0) return;
do {
@@ -25,10 +157,10 @@ void zmemcpy(dest, source, len)
} while (--len != 0);
}
-int zmemcmp(s1, s2, len)
- const Bytef* s1;
- const Bytef* s2;
- uInt len;
+int ZLIB_INTERNAL zmemcmp(
+ const Bytef* s1,
+ const Bytef* s2,
+ uInt len)
{
uInt j;
@@ -38,9 +170,9 @@ int zmemcmp(s1, s2, len)
return 0;
}
-void zmemzero(dest, len)
- Bytef* dest;
- uInt len;
+void ZLIB_INTERNAL zmemzero(
+ Bytef* dest,
+ uInt len)
{
if (len == 0) return;
do {
@@ -49,11 +181,13 @@ void zmemzero(dest, len)
}
#endif
-#if defined( MSDOS ) && defined( __TURBOC__ ) && !defined( MY_ZCALLOC )
-#if (defined( __BORLANDC__) || !defined(SMALL_MEDIUM)) && !defined(__32BIT__)
-/* Small and medium model in Turbo C are for now limited to near allocation
- * with reduced MAX_WBITS and MAX_MEM_LEVEL
- */
+#ifndef Z_SOLO
+
+#ifdef SYS16BIT
+
+#ifdef __TURBOC__
+/* Turbo C in 16-bit mode */
+
# define MY_ZCALLOC
/* Turbo C malloc() does not allow dynamic allocation of 64K bytes
@@ -80,11 +214,13 @@ local ptr_table table[MAX_PTR];
* a protected system like OS/2. Use Microsoft C instead.
*/
-voidpf zcalloc (voidpf opaque, unsigned items, unsigned size)
+voidpf ZLIB_INTERNAL zcalloc (voidpf opaque, unsigned items, unsigned size)
{
- voidpf buf = opaque; /* just to make some compilers happy */
+ voidpf buf;
ulg bsize = (ulg)items*size;
+ (void)opaque;
+
/* If we allocate less than 65520 bytes, we assume that farmalloc
* will return a usable pointer which doesn't have to be normalized.
*/
@@ -104,9 +240,12 @@ voidpf zcalloc (voidpf opaque, unsigned items, unsigned size)
return buf;
}
-void zcfree (voidpf opaque, voidpf ptr)
+void ZLIB_INTERNAL zcfree (voidpf opaque, voidpf ptr)
{
int n;
+
+ (void)opaque;
+
if (*(ush*)&ptr != 0) { /* object < 64K */
farfree(ptr);
return;
@@ -122,14 +261,13 @@ void zcfree (voidpf opaque, voidpf ptr)
next_ptr--;
return;
}
- ptr = opaque; /* just to make some compilers happy */
Assert(0, "zcfree: ptr not found");
}
-#endif
-#endif /* MSDOS && __TURBOC__ */
+
+#endif /* __TURBOC__ */
-#if defined(M_I86) && !defined(__32BIT__) && !defined( MY_ZCALLOC )
+#ifdef M_I86
/* Microsoft C in 16-bit mode */
# define MY_ZCALLOC
@@ -139,43 +277,49 @@ void zcfree (voidpf opaque, voidpf ptr)
# define _hfree hfree
#endif
-voidpf zcalloc (voidpf opaque, unsigned items, unsigned size)
+voidpf ZLIB_INTERNAL zcalloc (voidpf opaque, uInt items, uInt size)
{
- if (opaque) opaque = 0; /* to make compiler happy */
+ (void)opaque;
return _halloc((long)items, size);
}
-void zcfree (voidpf opaque, voidpf ptr)
+void ZLIB_INTERNAL zcfree (voidpf opaque, voidpf ptr)
{
- if (opaque) opaque = 0; /* to make compiler happy */
+ (void)opaque;
_hfree(ptr);
}
-#endif /* MSC */
+#endif /* M_I86 */
+
+#endif /* SYS16BIT */
#ifndef MY_ZCALLOC /* Any system without a special alloc function */
#ifndef STDC
-extern voidp ft_scalloc OF((uInt items, uInt size));
-extern void ft_sfree OF((voidpf ptr));
+extern voidp malloc OF((uInt size));
+extern voidp calloc OF((uInt items, uInt size));
+extern void free OF((voidpf ptr));
#endif
-voidpf zcalloc (opaque, items, size)
- voidpf opaque;
- unsigned items;
- unsigned size;
+voidpf ZLIB_INTERNAL zcalloc (
+ voidpf opaque,
+ unsigned items,
+ unsigned size)
{
- if (opaque) items += size - size; /* make compiler happy */
- return (voidpf)ft_scalloc(items, size);
+ (void)opaque;
+ return sizeof(uInt) > 2 ? (voidpf)malloc(items * size) :
+ (voidpf)calloc(items, size);
}
-void zcfree (opaque, ptr)
- voidpf opaque;
- voidpf ptr;
+void ZLIB_INTERNAL zcfree (
+ voidpf opaque,
+ voidpf ptr)
{
- ft_sfree(ptr);
- if (opaque) return; /* make compiler happy */
+ (void)opaque;
+ free(ptr);
}
#endif /* MY_ZCALLOC */
+
+#endif /* !Z_SOLO */
diff --git a/src/gzip/zutil.h b/src/gzip/zutil.h
index c9688cd..a385738 100644
--- a/src/gzip/zutil.h
+++ b/src/gzip/zutil.h
@@ -1,5 +1,5 @@
/* zutil.h -- internal interface and configuration of the compression library
- * Copyright (C) 1995-2002 Jean-loup Gailly.
+ * Copyright (C) 1995-2016 Jean-loup Gailly, Mark Adler
* For conditions of distribution and use, see copyright notice in zlib.h
*/
@@ -10,26 +10,35 @@
/* @(#) $Id$ */
-#ifndef _Z_UTIL_H
-#define _Z_UTIL_H
+#ifndef ZUTIL_H
+#define ZUTIL_H
+
+#ifdef HAVE_HIDDEN
+# define ZLIB_INTERNAL __attribute__((visibility ("hidden")))
+#else
+# define ZLIB_INTERNAL
+#endif
#include "zlib.h"
-#ifdef STDC
-# include <stddef.h>
+#if defined(STDC) && !defined(Z_SOLO)
+# if !(defined(_WIN32_WCE) && defined(_MSC_VER))
+# include <stddef.h>
+# endif
# include <string.h>
# include <stdlib.h>
#endif
-#ifdef NO_ERRNO_H
- extern int errno;
-#else
-# include <errno.h>
+
+#ifdef Z_SOLO
+ typedef long ptrdiff_t; /* guess -- will be caught if guess is wrong */
#endif
#ifndef local
# define local static
#endif
-/* compile with -Dlocal if your debugger can't find static symbols */
+/* since "static" is used to mean two completely different things in C, we
+ define "local" for the non-static meaning of "static", for readability
+ (compile with -Dlocal if your debugger can't find static symbols) */
typedef unsigned char uch;
typedef uch FAR uchf;
@@ -37,9 +46,13 @@ typedef unsigned short ush;
typedef ush FAR ushf;
typedef unsigned long ulg;
+extern z_const char * const z_errmsg[10]; /* indexed by 2-zlib_error */
+/* (size given to avoid silly warnings with Visual C++) */
+
+#define ERR_MSG(err) z_errmsg[Z_NEED_DICT-(err)]
#define ERR_RETURN(strm,err) \
- return (strm->msg = (char*)ERR_MSG(err), (err))
+ return (strm->msg = ERR_MSG(err), (err))
/* To be used only when the state is known to be valid */
/* common constants */
@@ -69,90 +82,133 @@ typedef unsigned long ulg;
/* target dependencies */
-#ifdef MSDOS
+#if defined(MSDOS) || (defined(WINDOWS) && !defined(WIN32))
# define OS_CODE 0x00
-# if defined(__TURBOC__) || defined(__BORLANDC__)
-# if(__STDC__ == 1) && (defined(__LARGE__) || defined(__COMPACT__))
- /* Allow compilation with ANSI keywords only enabled */
- void _Cdecl farfree( void *block );
- void *_Cdecl farmalloc( unsigned long nbytes );
-# else
-# include <alloc.h>
+# ifndef Z_SOLO
+# if defined(__TURBOC__) || defined(__BORLANDC__)
+# if (__STDC__ == 1) && (defined(__LARGE__) || defined(__COMPACT__))
+ /* Allow compilation with ANSI keywords only enabled */
+ void _Cdecl farfree( void *block );
+ void *_Cdecl farmalloc( unsigned long nbytes );
+# else
+# include <alloc.h>
+# endif
+# else /* MSC or DJGPP */
+# include <malloc.h>
# endif
-# else /* MSC or DJGPP */
# endif
#endif
-#ifdef OS2
-# define OS_CODE 0x06
-#endif
-
-#ifdef WIN32 /* Window 95 & Windows NT */
-# define OS_CODE 0x0b
+#ifdef AMIGA
+# define OS_CODE 1
#endif
#if defined(VAXC) || defined(VMS)
-# define OS_CODE 0x02
+# define OS_CODE 2
# define F_OPEN(name, mode) \
- ft_fopen((name), (mode), "mbc=60", "ctx=stm", "rfm=fix", "mrs=512")
+ fopen((name), (mode), "mbc=60", "ctx=stm", "rfm=fix", "mrs=512")
#endif
-#ifdef AMIGA
-# define OS_CODE 0x01
+#ifdef __370__
+# if __TARGET_LIB__ < 0x20000000
+# define OS_CODE 4
+# elif __TARGET_LIB__ < 0x40000000
+# define OS_CODE 11
+# else
+# define OS_CODE 8
+# endif
#endif
#if defined(ATARI) || defined(atarist)
-# define OS_CODE 0x05
+# define OS_CODE 5
+#endif
+
+#ifdef OS2
+# define OS_CODE 6
+# if defined(M_I86) && !defined(Z_SOLO)
+# include <malloc.h>
+# endif
#endif
#if defined(MACOS) || defined(TARGET_OS_MAC)
-# define OS_CODE 0x07
-# if defined(__MWERKS__) && __dest_os != __be_os && __dest_os != __win32_os
-# include <unix.h> /* for fdopen */
-# else
-# ifndef fdopen
-# define fdopen(fd,mode) NULL /* No fdopen() */
+# define OS_CODE 7
+# ifndef Z_SOLO
+# if defined(__MWERKS__) && __dest_os != __be_os && __dest_os != __win32_os
+# include <unix.h> /* for fdopen */
+# else
+# ifndef fdopen
+# define fdopen(fd,mode) NULL /* No fdopen() */
+# endif
# endif
# endif
#endif
-#ifdef __50SERIES /* Prime/PRIMOS */
-# define OS_CODE 0x0F
+#ifdef __acorn
+# define OS_CODE 13
#endif
-#ifdef TOPS20
-# define OS_CODE 0x0a
+#if defined(WIN32) && !defined(__CYGWIN__)
+# define OS_CODE 10
+#endif
+
+#ifdef _BEOS_
+# define OS_CODE 16
+#endif
+
+#ifdef __TOS_OS400__
+# define OS_CODE 18
+#endif
+
+#ifdef __APPLE__
+# define OS_CODE 19
#endif
#if defined(_BEOS_) || defined(RISCOS)
# define fdopen(fd,mode) NULL /* No fdopen() */
#endif
-#if (defined(_MSC_VER) && (_MSC_VER > 600))
-# define fdopen(fd,type) _fdopen(fd,type)
+#if (defined(_MSC_VER) && (_MSC_VER > 600)) && !defined __INTERIX
+# if defined(_WIN32_WCE)
+# define fdopen(fd,mode) NULL /* No fdopen() */
+# ifndef _PTRDIFF_T_DEFINED
+ typedef int ptrdiff_t;
+# define _PTRDIFF_T_DEFINED
+# endif
+# else
+# define fdopen(fd,type) _fdopen(fd,type)
+# endif
+#endif
+
+#if defined(__BORLANDC__) && !defined(MSDOS)
+ #pragma warn -8004
+ #pragma warn -8008
+ #pragma warn -8066
#endif
+#ifndef Z_FREETYPE
+
+/* provide prototypes for these when building zlib without LFS */
+#if !defined(_WIN32) && \
+ (!defined(_LARGEFILE64_SOURCE) || _LFS64_LARGEFILE-0 == 0)
+ ZEXTERN uLong ZEXPORT adler32_combine64 OF((uLong, uLong, z_off_t));
+ ZEXTERN uLong ZEXPORT crc32_combine64 OF((uLong, uLong, z_off_t));
+#endif
- /* Common defaults */
+#endif /* !Z_FREETYPE */
+
+ /* common defaults */
#ifndef OS_CODE
-# define OS_CODE 0x03 /* assume Unix */
+# define OS_CODE 3 /* assume Unix */
#endif
#ifndef F_OPEN
-# define F_OPEN(name, mode) ft_fopen((name), (mode))
+# define F_OPEN(name, mode) fopen((name), (mode))
#endif
/* functions */
-#ifdef HAVE_STRERROR
- extern char *strerror OF((int));
-# define zstrerror(errnum) strerror(errnum)
-#else
-# define zstrerror(errnum) ""
-#endif
-
-#if defined(pyr)
+#if defined(pyr) || defined(Z_SOLO)
# define NO_MEMCPY
#endif
#if defined(SMALL_MEDIUM) && !defined(_MSC_VER) && !defined(__SC__)
@@ -176,16 +232,16 @@ typedef unsigned long ulg;
# define zmemzero(dest, len) ft_memset(dest, 0, len)
# endif
#else
- extern void zmemcpy OF((Bytef* dest, const Bytef* source, uInt len));
- extern int zmemcmp OF((const Bytef* s1, const Bytef* s2, uInt len));
- extern void zmemzero OF((Bytef* dest, uInt len));
+ void ZLIB_INTERNAL zmemcpy OF((Bytef* dest, const Bytef* source, uInt len));
+ int ZLIB_INTERNAL zmemcmp OF((const Bytef* s1, const Bytef* s2, uInt len));
+ void ZLIB_INTERNAL zmemzero OF((Bytef* dest, uInt len));
#endif
/* Diagnostic functions */
-#ifdef DEBUG
+#ifdef ZLIB_DEBUG
# include <stdio.h>
- extern int z_verbose;
- extern void z_error OF((char *m));
+ extern int ZLIB_INTERNAL z_verbose;
+ extern void ZLIB_INTERNAL z_error OF((char *m));
# define Assert(cond,msg) {if(!(cond)) z_error(msg);}
# define Trace(x) {if (z_verbose>=0) fprintf x ;}
# define Tracev(x) {if (z_verbose>0) fprintf x ;}
@@ -201,15 +257,19 @@ typedef unsigned long ulg;
# define Tracecv(c,x)
#endif
-
-typedef uLong (*check_func) OF((uLong check, const Bytef *buf,
- uInt len));
-local voidpf zcalloc OF((voidpf opaque, unsigned items, unsigned size));
-local void zcfree OF((voidpf opaque, voidpf ptr));
+#ifndef Z_SOLO
+ voidpf ZLIB_INTERNAL zcalloc OF((voidpf opaque, unsigned items,
+ unsigned size));
+ void ZLIB_INTERNAL zcfree OF((voidpf opaque, voidpf ptr));
+#endif
#define ZALLOC(strm, items, size) \
(*((strm)->zalloc))((strm)->opaque, (items), (size))
#define ZFREE(strm, addr) (*((strm)->zfree))((strm)->opaque, (voidpf)(addr))
#define TRY_FREE(s, p) {if (p) ZFREE(s, p);}
-#endif /* _Z_UTIL_H */
+/* Reverse the bytes in a 32-bit value */
+#define ZSWAP32(q) ((((q) >> 24) & 0xff) + (((q) >> 8) & 0xff00) + \
+ (((q) & 0xff00) << 8) + (((q) & 0xff) << 24))
+
+#endif /* ZUTIL_H */