kmx git

Commit	Date	Message
bd5ae400	2000-07-05T04:32:02	Run g++ on the FreeType library. This should make the use of code in C++ programs easier: Renamed FT_WordXX to FT_UIntXX. Changed a lot of void* to FT_Byte* if related to i/o streams -- FreeType always accesses streams byte-wise, so this makes sense IMHO. Added a lot of #ifdef __cplusplus to header files (and removed a few). Other minor syntax fixes (mostly casts). Replaced the variable `private' with `private_dict' -- `private' is reserved in C++.
c6a92202	2000-07-04T18:12:13	various clean-ups: - using FT_UNUSED instead of UNUSED - using FT_LONG64 and FT_INT64 instead of LONG64 & INT64 - using FT_SIZEOF_INT & FT_SIZEOF_LONG instead of... - removed the #ifdefs that used SIZEOF_INT, instead we now use FT_Int32 and FT_UInt32 when needed to support 32-bits quantity correctly on 64-bits systems..
11735fe3	2000-07-01T14:08:31	A small fix from Tom.
f9ca2bb5	2000-06-30T23:12:55	managed to re-design entirely the API in <freetype/ftglyph.h> It is now really the "glyph factory" that Stefan was probably dreaming about.. fixed some recent formatting errors from Werner ;-) cleaned up the demonstration programs from most of the rust that they had, though I'm sure someone is going to re-format them really soon !! "ftstring" now uses the new ftglyph.h API, and is now faster and smaller.. yep..
ac39ecdc	2000-06-30T22:24:36	Formatting... Fixing incorrect scaling of vertical advance width.
5ae831c1	2000-06-30T01:31:22	changes used to implement the auto-hinting support
32b85e67	2000-06-29T21:48:58	various bug fixes in the postscript font drivers (mainly they added one un-necessary point to each contour..)
deb4e983	2000-06-29T03:14:25	Formatting... Preprocessor lines now always start the line. Improved error handling in `base' module. Fixed a out-of-bounds error in ttgload.
728da1c8	2000-06-27T23:21:51	changed file names and some functions names to avoid conflicts with the "type1" driver.
c3128615	2000-06-23T05:02:13	bugfixes in the Type1 drivers
5b58f5e3	2000-06-23T04:19:36	fixed *top++ bug present in type1/t1gload.c as well
d0079e66	2000-06-23T00:07:06	improved the Type1 drivers to deal with the case where the lenIV field is set to -1 to indicate unencoded charstrings fixed some source code to prevent a compiler bug on IRIX fixed the module version's in the "type1z" driver
f0df85ba	2000-06-22T00:17:42	- MAJOR INTERNAL REDESIGN: A lot of internal modifications have been performed lately on the source in order to provide the following enhancements: - more generic module support: The FT_Module type is now defined to represent a handle to a given module. The file <freetype/ftmodule.h> contains the FT_Module_Class definition, as well as the module-loading public API The FT_Driver type is still defined, and still represents a pointer to a font driver. Note that FT_Add_Driver is replaced by FT_Add_Module, FT_Get_Driver by FT_Get_Module, etc.. - support for generic glyph image types: The FT_Renderer type is a pointer to a module used to perform various operations on glyph image. Each renderer is capable of handling images in a single format (e.g. ft_glyph_format_outline). Its functions are used to: - transform an glyph image - render a glyph image into a bitmap - return the control box (dimensions) of a given glyph image The scan converters "ftraster.c" and "ftgrays.c" have been moved to the new directory "src/renderer", and are used to provide two default renderer modules. One corresponds to the "standard" scan-converter, the other to the "smooth" one. The current renderer can be set through the new function FT_Set_Renderer. The old raster-related function FT_Set_Raster, FT_Get_Raster and FT_Set_Raster_Mode have now disappeared, in favor of the new: FT_Get_Renderer FT_Set_Renderer see the file <freetype/ftrender.h> for more details.. These changes were necessary to properly support different scalable formats in the future, like bi-color glyphs, etc.. - glyph loader object: A new internal object, called a 'glyph loader' has been introduced in the base layer. It is used by all scalable format font drivers to load glyphs and composites. This object has been created to reduce the code size of each driver, as each one of them basically re-implemented its functionality. See <freetype/internal/ftobjs.h> and the FT_GlyphLoader type for more information.. - FT_GlyphSlot had new fields: In order to support extended features (see below), the FT_GlyphSlot structure has a few new fields: linearHoriAdvance: this field gives the linearly scaled (i.e. scaled but unhinted) advance width for the glyph, expressed as a 16.16 fixed pixel value. This is useful to perform WYSIWYG text. linearVertAdvance: this field gives the linearly scaled advance height for the glyph (relevant in vertical glyph layouts only). This is useful to perform WYSIWYG text. Note that the two above field replace the removed "metrics2" field in the glyph slot. advance: this field is a vector that gives the transformed advance for the glyph. By default, it corresponds to the advance width, unless FT_LOAD_VERTICAL_LAYOUT was specified when calling FT_Load_Glyph or FT_Load_Char bitmap_left: this field gives the distance in integer pixels from the current pen position to the left-most pixel of a glyph image WHEN IT IS A BITMAP. It is only valid when the "format" field is set to "ft_glyph_format_bitmap", for example, after calling the new function FT_Render_Glyph. bitmap_top: this field gives the distance in integer pixels from the current pen position (located on the baseline) to the top-most pixel of the glyph image WHEN IT IS A BITMAP. Positive values correspond to upwards Y. loader: this is a new private field for the glyph slot. Client applications should not touch it.. - support for transforms and direct rendering in FT_Load_Glyph: Most of the functionality found in <freetype/ftglyph.h> has been moved to the core library. Hence, the following: - a transform can be specified for a face through FT_Set_Transform. this transform is applied by FT_Load_Glyph to scalable glyph images (i.e. NOT TO BITMAPS) before the function returns, unless the bit flag FT_LOAD_IGNORE_TRANSFORM was set in the load flags.. - once a glyph image has been loaded, it can be directly converted to a bitmap by using the new FT_Render_Glyph function. Note that this function takes the glyph image from the glyph slot, and converts it to a bitmap whose properties are returned in "face.glyph.bitmap", "face.glyph.bitmap_left" and "face.glyph.bitmap_top". The original native image might be lost after the conversion. - when using the new bit flag FT_LOAD_RENDER, the FT_Load_Glyph and FT_Load_Char functions will call FT_Render_Glyph automatically when needed.
f9b8dec4	2000-06-16T19:34:52	major reformatting of the modules source code in order to get rid of most of the basic types redefinitions (i.e. FT_Int instead of "FT_Int", etc..) The format-specific prefixs like "TT_", "T1_", "T2_" & 'CID_" are now only used in relevant structures.. fixed Werner's fix to t2gload.c :-) other small bug fixes
78575dc0	2000-06-12T19:36:41	A lot of formatting. Added more tracing levels. More Makefile fixes. Minor other changes.
e35cac66	2000-06-11T03:46:57	A complete revision of FreeType 2's GNU makefiles (of the library): Tons of unnecessary stuff have been removed; only the essential rules have been retained. The source files now depend on all header files in include/freetype, include/freetype/config, and include/freetype/internal. This is not optimal, I know, and I'll try to improve this, but it is better than before (namely no dependencies on `internal'). FTDEBUG_SRC has been added (similar to FTSYS_SRC) -- I don't know exactly whether this is really useful, but it doesn't harm. There is now more documentation in the makefiles itself. io-frames.html: Use of <th>, <code>, and <var> for better tagging. Reactivating of FT_DEBUG_LEVEL_xxx macros. Added a lot of #include directives to make `multi' builds possible -- note that currently the modules cid, t1, and t1z have clashing structures and functions which means that you can only use one of these three modules for a multi build. Added some missing function declarations to (local) header files. Renamed some T1_Open_Face() to CID_Open_Face() in the cid module -- a lot of other functions should be renamed also... Replaced many FT_xxx stuff with T1_xxx in t1z driver -- this isn't finished yet... Fixed FT_Free() to allow a NULL pointer without an assertion (this has always been a valid assumption in FreeType, at least in FT 1.x). A lot of other, minor fixes (mostly documentation).
6cef627d	2000-06-07T20:06:54	added code to correctly scale global metrics
e1d5dd78	2000-06-07T04:48:12	Moved all *errors.h header files to include/freetype/internal for consistency. Removed unused error message.
04aa800c	2000-06-01T03:27:48	added a CID-keyed font driver in "src/cid" fixed two bugs in the smooth renderer
5413644b	2000-05-26T17:52:06	added a new demonstration program called "ftmulti" to demonstrate the multiple masters support fixed a few bugs
11187206	2000-05-26T17:13:23	finalised the multiple masters support fixed some nasty little bugs too
7c388ba4	2000-05-26T02:07:40	added support for multiple master fonts in "type1z". It is now working, but there is no way currently to change the default weight vector (tested with custom vectors though). Note that you should remove the "type1" driver from the module list to be able to test it..
1c9a1cab	2000-05-24T21:12:02	important modifications to the Type1z driver these are used to prepare for multiple master fonts
1fb6eea7	2000-05-24T00:31:14	EXPORT_DEF renamed to FT_EXPORT_DEF + reformating/spacing
f5dcdd5c	2000-05-23T22:16:27	minor fix to the Type1 driver(s) to apply the font matrix when necessary..
e49ab25c	2000-05-16T23:44:38	formatting - removed trailing spaces
c30aea98	2000-05-12T15:01:18	another massive changes in order to completely avoid compiler warnings with GCC + "-ansi -pedantic -Wall -W" and LCC. Also fixed the compilation of "type1z" with Win32-LCC (its pre-processor is broken !!) Updated the BUILD document too
bfe2f98f	2000-05-12T12:17:15	a new massive grunt work. Redefined the EXPORT_DEF, EXPORT_FUNC, BASE_DEF and BASE_FUNC macros to let them take an argument.. This is needed to compile the library as a DLL on some platforms that have different compiler conventions..
4f2c5544	2000-05-12T10:19:41	additional changes, this time in order to pass extra parameters to font drivers when creating a new face object. The FT_Open_Args structure has been changed to simplify its use and allow generic parameters too..
efce08d6	2000-05-11T18:23:52	major re-organisation of the FreeType 2 directory hierarchy
4d3e5639	2000-05-05T12:33:23	closed most of the memory leaks in the Type 1 driver(s) this is required before any serious work to implement multiple masters
d50941dc	2000-05-05T01:36:56	fixed a compilation problem that occurred with the LCC C pre-processor. really minor
d186a361	2000-05-02T17:41:41	various updates to reduce the compilation warnings
9a9315fa	2000-05-02T10:59:01	changes to reflect the new files include/tttables.h include/t1tables.h
d8723b4f	2000-04-14T11:29:14	fixed another small bug. The metrics were not computed correctly..
1216e434	2000-04-14T11:22:17	fixed a small bug that prevented the loading of certain fonts that use the DOS linefeed convention.., including the newest XFree86 4.0 B&H Type 1 fonts !!
82942cc2	2000-03-30T08:43:03	simple fix required by the auto-hinting module (sets the ft_outline_reverse_fill bit_flag)
ed7f62ac	2000-03-28T11:19:28	support for FT_LOAD_NO_RECURSE needed by the auto-hinter
5ae477c4	2000-03-17T11:51:33	Added prototype for T1_Done_Parser()
a6415244	2000-03-13T14:25:00	updated documentation for Beta 4
7f7aadf4	2000-03-13T12:57:27	finished moving all configuration macros to "config/ftoption.h"
3246efed	2000-03-13T12:12:46	first step towards moving all configuration options to the single "config/ftoption.h"
7f615aef	2000-03-13T11:49:20	renamed all outlines functions to the FT_Outline_<action> syntax..
41dbcbf6	2000-03-09T11:46:25	reformatting, changing the FT_Outline structure: - "flags" have been renamed to "tags" - "outline_flags" have been renamed to "flags" Look for more re-formatting today..
0f99ddda	2000-03-06T13:23:32	changed the structure of FT_Outline in order to pack all outline flags in a single integer.. Changed the rest of the library and demo programs accordingly..
9d76a8d6	2000-03-06T09:51:19	a few fixes to get rid of unwanted compile-time warnings
febe3fbe	2000-03-05T01:14:19	A first check of FT2's Make system. Many smaller and larger bugs have been fixed: . Removing unused variables. . detect.mk files now must provide $(CONFIG_FILE) and not $(CONFIG_RULE). . ansi.mk will now be really used as a fallback if the detect mechanism fails. . ANSIFLAGS will now be really used (fixing a typo). . `make clean' now works (again two typos). . Detection of gcc on Unix has been fixed (using the `-v' option instead of `--version'). . `make devel' now works (on Unix). . Fixing again a bug in demos/graph/x11/rules.mk to allow multiple use of `-L' compiler options. . $(BASE_H) now contains a few more header files. As usual, a lot of formatting (not finished yet).
ca13392d	2000-03-01T13:24:38	a few changes to really compile font drivers in independent single objects..
e595014a	2000-02-29T17:14:02	simple minor fix in t1afm.h/t1afm.c
9c84887d	2000-02-28T11:32:54	remaining fixes from Just
7b63d2ea	2000-02-28T11:25:01	fixed a bug that prevented the reading of AFM files..
d16a4b81	2000-02-15T12:56:44	removed obsolete hinter source code
95bec282	2000-02-15T12:55:57	updated version of the experimental Type 1 driver (this thing now works even better than the "regular" driver, but is much smaller). Provides no hinter !!
dbe4872b	2000-02-14T16:45:40	removed obsolete source file
0dd34348	2000-02-02T12:20:53	The Type 1 experimental driver was updated - small reduction of the code size of "t1encode.c" - removed the hinter (not useful with the upcoming auto-hinter..) - updated "t1load.c" to reduce warnings with Visual C++ - considerably changed the glyph loader (it is simpler) Beware, this code is still experimental, and is _not_ debugged. I don't even guarantee that it works for now - David
2dfb5aca	2000-01-27T14:02:04	added a new experimental Type 1 driver. This version sports several improvements compared to "src/type1". Briefly : - the postscript-like interpreter is now gone. We now perform pattern-matching to load our font content. The resultant code is much faster, smaller, and easier to maintain. For a more detailed description, see the comments at the start of "src/type1z/t1objs.c" - the glyph loader will be greatly simplified really soon, and the clumsy hinter will be ditched in favor of a more general auto-hinting module (when we get one). The goal is to strip down the Type1 driver to about 15-20 Kb. This is still an experimental version. It is added to the repository for archiving. You should not try to use it for now (it won't work because some crucial parts are _knowingly_ ignored for now !). Note that the "old" type1 driver will probably move to the "demos/src" directory, in order to show how one can replace one given font driver at runtime (and to provide the functionality of the "t1dump" program).

bd5ae400

2000-07-05T04:32:02

Run g++ on the FreeType library. This should make the use of code in C++ programs easier: Renamed FT_WordXX to FT_UIntXX. Changed a lot of void* to FT_Byte* if related to i/o streams -- FreeType always accesses streams byte-wise, so this makes sense IMHO. Added a lot of #ifdef __cplusplus to header files (and removed a few). Other minor syntax fixes (mostly casts). Replaced the variable `private' with `private_dict' -- `private' is reserved in C++.

c6a92202

2000-07-04T18:12:13

various clean-ups: - using FT_UNUSED instead of UNUSED - using FT_LONG64 and FT_INT64 instead of LONG64 & INT64 - using FT_SIZEOF_INT & FT_SIZEOF_LONG instead of... - removed the #ifdefs that used SIZEOF_INT, instead we now use FT_Int32 and FT_UInt32 when needed to support 32-bits quantity correctly on 64-bits systems..

11735fe3

2000-07-01T14:08:31

A small fix from Tom.

f9ca2bb5

2000-06-30T23:12:55

managed to re-design entirely the API in <freetype/ftglyph.h> It is now really the "glyph factory" that Stefan was probably dreaming about.. fixed some recent formatting errors from Werner ;-) cleaned up the demonstration programs from most of the rust that they had, though I'm sure someone is going to re-format them really soon !! "ftstring" now uses the new ftglyph.h API, and is now faster and smaller.. yep..

ac39ecdc

2000-06-30T22:24:36

Formatting... Fixing incorrect scaling of vertical advance width.

5ae831c1

2000-06-30T01:31:22

changes used to implement the auto-hinting support

32b85e67

2000-06-29T21:48:58

various bug fixes in the postscript font drivers (mainly they added one un-necessary point to each contour..)

deb4e983

2000-06-29T03:14:25

Formatting... Preprocessor lines now always start the line. Improved error handling in `base' module. Fixed a out-of-bounds error in ttgload.

728da1c8

2000-06-27T23:21:51

changed file names and some functions names to avoid conflicts with the "type1" driver.

c3128615

2000-06-23T05:02:13

bugfixes in the Type1 drivers

5b58f5e3

2000-06-23T04:19:36

fixed *top++ bug present in type1/t1gload.c as well

d0079e66

2000-06-23T00:07:06

improved the Type1 drivers to deal with the case where the lenIV field is set to -1 to indicate unencoded charstrings fixed some source code to prevent a compiler bug on IRIX fixed the module version's in the "type1z" driver

f0df85ba

2000-06-22T00:17:42

- MAJOR INTERNAL REDESIGN: A lot of internal modifications have been performed lately on the source in order to provide the following enhancements: - more generic module support: The FT_Module type is now defined to represent a handle to a given module. The file <freetype/ftmodule.h> contains the FT_Module_Class definition, as well as the module-loading public API The FT_Driver type is still defined, and still represents a pointer to a font driver. Note that FT_Add_Driver is replaced by FT_Add_Module, FT_Get_Driver by FT_Get_Module, etc.. - support for generic glyph image types: The FT_Renderer type is a pointer to a module used to perform various operations on glyph image. Each renderer is capable of handling images in a single format (e.g. ft_glyph_format_outline). Its functions are used to: - transform an glyph image - render a glyph image into a bitmap - return the control box (dimensions) of a given glyph image The scan converters "ftraster.c" and "ftgrays.c" have been moved to the new directory "src/renderer", and are used to provide two default renderer modules. One corresponds to the "standard" scan-converter, the other to the "smooth" one. The current renderer can be set through the new function FT_Set_Renderer. The old raster-related function FT_Set_Raster, FT_Get_Raster and FT_Set_Raster_Mode have now disappeared, in favor of the new: FT_Get_Renderer FT_Set_Renderer see the file <freetype/ftrender.h> for more details.. These changes were necessary to properly support different scalable formats in the future, like bi-color glyphs, etc.. - glyph loader object: A new internal object, called a 'glyph loader' has been introduced in the base layer. It is used by all scalable format font drivers to load glyphs and composites. This object has been created to reduce the code size of each driver, as each one of them basically re-implemented its functionality. See <freetype/internal/ftobjs.h> and the FT_GlyphLoader type for more information.. - FT_GlyphSlot had new fields: In order to support extended features (see below), the FT_GlyphSlot structure has a few new fields: linearHoriAdvance: this field gives the linearly scaled (i.e. scaled but unhinted) advance width for the glyph, expressed as a 16.16 fixed pixel value. This is useful to perform WYSIWYG text. linearVertAdvance: this field gives the linearly scaled advance height for the glyph (relevant in vertical glyph layouts only). This is useful to perform WYSIWYG text. Note that the two above field replace the removed "metrics2" field in the glyph slot. advance: this field is a vector that gives the transformed advance for the glyph. By default, it corresponds to the advance width, unless FT_LOAD_VERTICAL_LAYOUT was specified when calling FT_Load_Glyph or FT_Load_Char bitmap_left: this field gives the distance in integer pixels from the current pen position to the left-most pixel of a glyph image WHEN IT IS A BITMAP. It is only valid when the "format" field is set to "ft_glyph_format_bitmap", for example, after calling the new function FT_Render_Glyph. bitmap_top: this field gives the distance in integer pixels from the current pen position (located on the baseline) to the top-most pixel of the glyph image WHEN IT IS A BITMAP. Positive values correspond to upwards Y. loader: this is a new private field for the glyph slot. Client applications should not touch it.. - support for transforms and direct rendering in FT_Load_Glyph: Most of the functionality found in <freetype/ftglyph.h> has been moved to the core library. Hence, the following: - a transform can be specified for a face through FT_Set_Transform. this transform is applied by FT_Load_Glyph to scalable glyph images (i.e. NOT TO BITMAPS) before the function returns, unless the bit flag FT_LOAD_IGNORE_TRANSFORM was set in the load flags.. - once a glyph image has been loaded, it can be directly converted to a bitmap by using the new FT_Render_Glyph function. Note that this function takes the glyph image from the glyph slot, and converts it to a bitmap whose properties are returned in "face.glyph.bitmap", "face.glyph.bitmap_left" and "face.glyph.bitmap_top". The original native image might be lost after the conversion. - when using the new bit flag FT_LOAD_RENDER, the FT_Load_Glyph and FT_Load_Char functions will call FT_Render_Glyph automatically when needed.

f9b8dec4

2000-06-16T19:34:52

major reformatting of the modules source code in order to get rid of most of the basic types redefinitions (i.e. FT_Int instead of "FT_Int", etc..) The format-specific prefixs like "TT_", "T1_", "T2_" & 'CID_" are now only used in relevant structures.. fixed Werner's fix to t2gload.c :-) other small bug fixes

78575dc0

2000-06-12T19:36:41

A lot of formatting. Added more tracing levels. More Makefile fixes. Minor other changes.

e35cac66

2000-06-11T03:46:57

A complete revision of FreeType 2's GNU makefiles (of the library): Tons of unnecessary stuff have been removed; only the essential rules have been retained. The source files now depend on all header files in include/freetype, include/freetype/config, and include/freetype/internal. This is not optimal, I know, and I'll try to improve this, but it is better than before (namely no dependencies on `internal'). FTDEBUG_SRC has been added (similar to FTSYS_SRC) -- I don't know exactly whether this is really useful, but it doesn't harm. There is now more documentation in the makefiles itself. io-frames.html: Use of <th>, <code>, and <var> for better tagging. Reactivating of FT_DEBUG_LEVEL_xxx macros. Added a lot of #include directives to make `multi' builds possible -- note that currently the modules cid, t1, and t1z have clashing structures and functions which means that you can only use one of these three modules for a multi build. Added some missing function declarations to (local) header files. Renamed some T1_Open_Face() to CID_Open_Face() in the cid module -- a lot of other functions should be renamed also... Replaced many FT_xxx stuff with T1_xxx in t1z driver -- this isn't finished yet... Fixed FT_Free() to allow a NULL pointer without an assertion (this has always been a valid assumption in FreeType, at least in FT 1.x). A lot of other, minor fixes (mostly documentation).

6cef627d

2000-06-07T20:06:54

added code to correctly scale global metrics

e1d5dd78

2000-06-07T04:48:12

Moved all *errors.h header files to include/freetype/internal for consistency. Removed unused error message.

04aa800c

2000-06-01T03:27:48

added a CID-keyed font driver in "src/cid" fixed two bugs in the smooth renderer

5413644b

2000-05-26T17:52:06

added a new demonstration program called "ftmulti" to demonstrate the multiple masters support fixed a few bugs

11187206

2000-05-26T17:13:23

finalised the multiple masters support fixed some nasty little bugs too

7c388ba4

2000-05-26T02:07:40

added support for multiple master fonts in "type1z". It is now working, but there is no way currently to change the default weight vector (tested with custom vectors though). Note that you should remove the "type1" driver from the module list to be able to test it..

1c9a1cab

2000-05-24T21:12:02

important modifications to the Type1z driver these are used to prepare for multiple master fonts

1fb6eea7

2000-05-24T00:31:14

EXPORT_DEF renamed to FT_EXPORT_DEF + reformating/spacing

f5dcdd5c

2000-05-23T22:16:27

minor fix to the Type1 driver(s) to apply the font matrix when necessary..

e49ab25c

2000-05-16T23:44:38

formatting - removed trailing spaces

c30aea98

2000-05-12T15:01:18

another massive changes in order to completely avoid compiler warnings with GCC + "-ansi -pedantic -Wall -W" and LCC. Also fixed the compilation of "type1z" with Win32-LCC (its pre-processor is broken !!) Updated the BUILD document too

bfe2f98f

2000-05-12T12:17:15

a new massive grunt work. Redefined the EXPORT_DEF, EXPORT_FUNC, BASE_DEF and BASE_FUNC macros to let them take an argument.. This is needed to compile the library as a DLL on some platforms that have different compiler conventions..

4f2c5544

2000-05-12T10:19:41

additional changes, this time in order to pass extra parameters to font drivers when creating a new face object. The FT_Open_Args structure has been changed to simplify its use and allow generic parameters too..

efce08d6

2000-05-11T18:23:52

major re-organisation of the FreeType 2 directory hierarchy

4d3e5639

2000-05-05T12:33:23

closed most of the memory leaks in the Type 1 driver(s) this is required before any serious work to implement multiple masters

d50941dc

2000-05-05T01:36:56

fixed a compilation problem that occurred with the LCC C pre-processor. really minor

d186a361

2000-05-02T17:41:41

various updates to reduce the compilation warnings

9a9315fa

2000-05-02T10:59:01

changes to reflect the new files include/tttables.h include/t1tables.h

d8723b4f

2000-04-14T11:29:14

fixed another small bug. The metrics were not computed correctly..

1216e434

2000-04-14T11:22:17

fixed a small bug that prevented the loading of certain fonts that use the DOS linefeed convention.., including the newest XFree86 4.0 B&H Type 1 fonts !!

82942cc2

2000-03-30T08:43:03

simple fix required by the auto-hinting module (sets the ft_outline_reverse_fill bit_flag)

ed7f62ac

2000-03-28T11:19:28

support for FT_LOAD_NO_RECURSE needed by the auto-hinter

5ae477c4

2000-03-17T11:51:33

Added prototype for T1_Done_Parser()

a6415244

2000-03-13T14:25:00

updated documentation for Beta 4

7f7aadf4

2000-03-13T12:57:27

finished moving all configuration macros to "config/ftoption.h"

3246efed

2000-03-13T12:12:46

first step towards moving all configuration options to the single "config/ftoption.h"

7f615aef

2000-03-13T11:49:20

renamed all outlines functions to the FT_Outline_<action> syntax..

41dbcbf6

2000-03-09T11:46:25

reformatting, changing the FT_Outline structure: - "flags" have been renamed to "tags" - "outline_flags" have been renamed to "flags" Look for more re-formatting today..

0f99ddda

2000-03-06T13:23:32

changed the structure of FT_Outline in order to pack all outline flags in a single integer.. Changed the rest of the library and demo programs accordingly..

9d76a8d6

2000-03-06T09:51:19

a few fixes to get rid of unwanted compile-time warnings

febe3fbe

2000-03-05T01:14:19

A first check of FT2's Make system. Many smaller and larger bugs have been fixed: . Removing unused variables. . detect.mk files now must provide $(CONFIG_FILE) and not $(CONFIG_RULE). . ansi.mk will now be really used as a fallback if the detect mechanism fails. . ANSIFLAGS will now be really used (fixing a typo). . `make clean' now works (again two typos). . Detection of gcc on Unix has been fixed (using the `-v' option instead of `--version'). . `make devel' now works (on Unix). . Fixing *again* a bug in demos/graph/x11/rules.mk to allow multiple use of `-L' compiler options. . $(BASE_H) now contains a few more header files. As usual, a lot of formatting (not finished yet).

ca13392d

2000-03-01T13:24:38

a few changes to really compile font drivers in independent single objects..

e595014a

2000-02-29T17:14:02

simple minor fix in t1afm.h/t1afm.c

9c84887d

2000-02-28T11:32:54

remaining fixes from Just

7b63d2ea

2000-02-28T11:25:01

fixed a bug that prevented the reading of AFM files..

d16a4b81

2000-02-15T12:56:44

removed obsolete hinter source code

95bec282

2000-02-15T12:55:57

updated version of the experimental Type 1 driver (this thing now works even better than the "regular" driver, but is much smaller). Provides no hinter !!

dbe4872b

2000-02-14T16:45:40

removed obsolete source file

0dd34348

2000-02-02T12:20:53

The Type 1 experimental driver was updated - small reduction of the code size of "t1encode.c" - removed the hinter (not useful with the upcoming auto-hinter..) - updated "t1load.c" to reduce warnings with Visual C++ - considerably changed the glyph loader (it is simpler) Beware, this code is still experimental, and is _not_ debugged. I don't even guarantee that it works for now - David

2dfb5aca

2000-01-27T14:02:04

added a new experimental Type 1 driver. This version sports several improvements compared to "src/type1". Briefly : - the postscript-like interpreter is now gone. We now perform pattern-matching to load our font content. The resultant code is much faster, smaller, and easier to maintain. For a more detailed description, see the comments at the start of "src/type1z/t1objs.c" - the glyph loader will be greatly simplified really soon, and the clumsy hinter will be ditched in favor of a more general auto-hinting module (when we get one). The goal is to strip down the Type1 driver to about 15-20 Kb. This is still an experimental version. It is added to the repository for archiving. You should not try to use it for now (it won't work because some crucial parts are _knowingly_ ignored for now !). Note that the "old" type1 driver will probably move to the "demos/src" directory, in order to show how one can replace one given font driver at runtime (and to provide the functionality of the "t1dump" program).

kc3-lang/freetype/src/type1z

src/type1z

Log