kmx git

Commit	Date	Message
d3c8e064	2000-12-04T22:53:55	- updating the header inclusion scheme to use <ft2build.h> by default.. - created "builds/devel" to hold developer builds options for both Win32 and Unix - fixed a bug in the winfonts driver, where the glyph image format wasn't set correctly..
b1aabf4c	2000-11-30T23:48:22	- added support for the free command-line Borland C++ compiler in the "builds" directory - modified a few files because BCC32 didn't like certain comparisons (UInt compared with a UShort, apparently the UShort is promoted to an Int) - updated the INSTALL file to include IDE compilation, prevent against BSD Make, and clarify the use of "make setup" (instead of "make") for build configuration
f1ca2344	2000-11-29T15:18:54	* src/sfnt/sfdriver.c: Include ttsbit.h and ttpost.h only conditionally. * src/truetype/ttdriver.c (Set_Char_Sizes, Set_Pixel_Sizes): Set `size->strike_index' only conditionally. * src/type1/t1driver.c, src/type1/t1objs.c: Include t1afm.h only conditionally. * src/winfonts/winfnt.h: Move all type definitions to... * src/include/freetype/internal/fnttypes.h: New file. * src/winfonts/winfnt.c: Use it. * include/freetype/internal/ftdebug.h: Replaced FT_CAT and FT_XCAT with a direct solution (which also satifies picky compilers).
34e52707	2000-11-13T16:58:01	Formatting; removing tabs.
200a1a41	2000-11-13T07:31:21	In function TT_Load_Generic_Header, change tracing output to indicate if a `bhed' or `head' table is being read. In function TT_LookUp_Table, change tracing output to indicate success or failure of table loading, and place output on one line.
e0bd0c01	2000-11-13T07:26:31	In function SFNT_Load_Face, set has_outline to true only if the font has a `CFF ' or `glyf' table.
90a03301	2000-11-07T17:21:11	All function comments are now removed from source files (and moved to the header files if necessary). Some minor fixes to have `make multi' run successfully (with gcc and g++). Fixing compiler warnings.
4b68007b	2000-11-07T06:30:29	Complementing David's changes with formatting, adding documentation, etc. More `*'-convention formatting, adding the `a' resp. `an' prefix to variables.
f96594fa	2000-11-06T23:07:51	integrated Yamano-Uchi changes to the base source code. However, I've made a few modifications: - there is no new field named "driver" in "FT_SizeRec" - the new fields in "TT_SizeRec" are: strike_index :: value 0xFFFF means "no sbit strike selected" strike_metrics :: the FT_Size_Metrics structure corresponding to the currently selected strike - the code in "ttload.c" has been somewhat cleaned up too thanks a lot, Y-U !! - David
dc72aff4	2000-11-04T08:33:38	Finishing David's latest changes (there were some errors in it).
54e75749	2000-11-04T02:52:02	defining new types to hold "internal" fields of public objects: FT_Face_Internal, FT_Size_Internal, FT_Slot_Internal these contain some fields that may change between releases of FreeType, without affecting the size of FT_FaceRec, FT_SizeRec, FT_GlyphSlotRec, etc.., which means that drivers wouldn't need to be recompiled if we only add new fields to an internal structure.. I plan to hack a few things related to the auto-hinter and I need this move to ensure that we will not break binary compatibility between 2.0 and 2.1 :-) - David
76a5f623	2000-11-04T01:55:49	major reformatting of the sources: FT_EXPORT_DEF => FT_EXPORT FT_EXPORT_FUNC => FT_EXPORT_DEF BASE_DEF => FT_BASE BASE_FUNC => FT_BASE_DEF LOCAL_DEF => FT_LOCAL LOCAL_FUNC => FT_LOCAL_DEF LOCAL_FUNC_X => FT_CALLBACK_DEF LOCAL_DEF_X => FT_CALLBACK_TABLE FT_CPLUSPLUS => FT_CALLBACK_TABLE_DEF
e4b32a5d	2000-10-31T20:42:18	Removing trailing whitespace.
ddbb8e7b	2000-10-26T10:04:16	Some formatting. Fixed some data types/added header files to remove compiler warnings. Added trivial input data check to FT_Outline_Get_BBox(). Fixed type1z -> type1 file inclusions.
47a5f41d	2000-10-17T03:38:43	Added copyright messages to all Makefiles. Added documentation to FT_Get_Sfnt_* stuff (in ftnames.[ch]) minor other doc fixes
1a2908bb	2000-09-21T14:10:23	Added support for (3,0) pid/eid.
21a27ee3	2000-09-01T14:36:39	Fixed a long outstanding bug with an incorrect offset for reading post tables.
4a5c142a	2000-08-29T18:37:25	Minor fixes.
5878a6d2	2000-08-29T16:03:01	a fix to the computation of the font "text height" (i.e. the baseline-to-baseline distance). Unfortunately, we cannot rely on the OS/2 fields, like sTypoAscender or usWinAscent to compute it. Rather, we only look at the horizontal header's content. In case the "line gap" is set to 0, we compute the text height as 115% of the ascender+descender value.. (this percentage is based on the values found in many Windows fonts).
24d7024c	2000-08-17T01:09:06	added draft "psaux" code the t1 driver now reads the complete font matrix and applies it (some fonts do not work properly without hinting though...)
9a814fab	2000-08-06T19:48:47	Yamano-uchi added support for SFNT-wrapped CID bitmap font files (with minor modifications from WL).
29a90e26	2000-08-03T00:03:08	Updating unix/ftconfig.in to recent config/ftconfig.h changes. More C++ fixes: Introducing LOCAL_FUNC_X for local functions used in function pointers (there are no local anonymous functions in C++) and FT_CPLUSPLUS (instead of FT_EXPORT_VAR) to define linkage of structures which contain function pointers.
3a89c2a4	2000-08-01T17:05:20	Removing FT_MAKE_OPTION_SINGLE_LIBRARY_OBJECT. It has never worked. Instead, define BASE_DEF() and BASE_FUNC() similarly to FT_EXPORT_DEF() and FT_EXPORT_FUNC(), respectively, allowing the programmer to define proper types and/or export lists for multiple DLLs if necessary (e.g. ftbase.dll -- standalone, fttype1.dll -- needs ftbase.dll, etc.). The library is finally compiling and linking natively with a C++ compiler!
c713d924	2000-08-01T13:17:04	Added #ifdef's for C++ to all header files.
b1dd3535	2000-07-31T22:51:00	Added autoconf tests FT_MUNMAP_DECL and FT_MUNMAP_PARAM to fix some devils. Updating unix/ftsystem.c accordingly. More warning fixes.
e72c9fec	2000-07-31T18:59:02	Simplifying the FIELD_* and FRAME_* macros. Before calling these macros, you should #define FT_STRUCTURE to the structure which will be filled. Replaced FT_FIELD_REF with FT_FIELD_SIZE, FT_FIELD_SIZE_DELTA, and FT_FIELD_OFFSET to make the code more readable; additionally, it should be more portable because we no longer cast a pointer to an FT_UShort (which e.g. fails with Sun's C++ compiler) but computes the difference between two pointers which is guaranteed to work. Fixing warnings (and C++ errors) while using Sun's latest cc and CC incarnations. Most of them are related to variable shadowing.
d060a75b	2000-07-20T06:57:41	Formatting. Rudimentary support for autoconf (still using GNU make) Say `make unix'.
6930b45f	2000-07-19T17:13:03	- introduced FT_Get_Glyph_Name (see freetype.h) to access individual glyph names. Changed some drivers to support it through a new interface named "glyph_name". - introduced FT_Get_Sfnt_Name (see ftnames.h) to access the SFNT name table in a TrueType/OpenType file..
e1bbc017	2000-07-19T06:25:56	Formatting. Fixing documentation.
c8f9cf37	2000-07-19T02:59:31	Formatting.
49bd4f05	2000-07-12T16:57:37	removed some warnings with Visual C++ that prevented compilation
7fa51b55	2000-07-08T19:51:42	Formatting. Adding some trivial error checking. Adding/Fixing tracing levels.
a90663f5	2000-07-08T00:41:13	vast clean-up of the sources in order to allow flat directory compilation (by defining the FT_FLAT_COMPILE macro at compile time..) moved "freetype2/BUILD" to "freetype2/docs/BUILD"
bd5ae400	2000-07-05T04:32:02	Run g++ on the FreeType library. This should make the use of code in C++ programs easier: Renamed FT_WordXX to FT_UIntXX. Changed a lot of void* to FT_Byte* if related to i/o streams -- FreeType always accesses streams byte-wise, so this makes sense IMHO. Added a lot of #ifdef __cplusplus to header files (and removed a few). Other minor syntax fixes (mostly casts). Replaced the variable `private' with `private_dict' -- `private' is reserved in C++.
c6a92202	2000-07-04T18:12:13	various clean-ups: - using FT_UNUSED instead of UNUSED - using FT_LONG64 and FT_INT64 instead of LONG64 & INT64 - using FT_SIZEOF_INT & FT_SIZEOF_LONG instead of... - removed the #ifdefs that used SIZEOF_INT, instead we now use FT_Int32 and FT_UInt32 when needed to support 32-bits quantity correctly on 64-bits systems..
aa8c7da0	2000-07-04T03:37:18	Don't use -lefence in the demo Makefile. Added C++ guards in ftmodule.h Fix error check in ftglyph.c Formatting; adding copyrights; fixing documentation
d18388e4	2000-07-03T15:00:49	fixed a few 64-bit related bugs in "sfnt/ttload.c" and "base/ftstream.c" Note that "TT_PCLT" was incorrectly defined in <freetype/tttables.h>
fbeb41d9	2000-07-02T00:27:53	Formatting. Adding copyright notices. Removing an unnecessary file (smooth.h).
a8bbc267	2000-07-01T14:06:46	Formatting as usual... Adding trivial argument checking to some functions. Added dynamic driver interface to cidriver. Minor `version' fixes for macfont and psnames modules. Removed unnecessary files
cc9fc49c	2000-06-30T06:21:26	Formatting... Applying some fixes from Tom.
32b85e67	2000-06-29T21:48:58	various bug fixes in the postscript font drivers (mainly they added one un-necessary point to each contour..)
deb4e983	2000-06-29T03:14:25	Formatting... Preprocessor lines now always start the line. Improved error handling in `base' module. Fixed a out-of-bounds error in ttgload.
9d636b6d	2000-06-27T23:32:27	various cleanups to reduce compiler warnings + support for CID-keyed fonts in the CFF driver (still some unexpected bugs though..)
a929ba9b	2000-06-25T06:47:11	applying formatting again
f0df85ba	2000-06-22T00:17:42	- MAJOR INTERNAL REDESIGN: A lot of internal modifications have been performed lately on the source in order to provide the following enhancements: - more generic module support: The FT_Module type is now defined to represent a handle to a given module. The file <freetype/ftmodule.h> contains the FT_Module_Class definition, as well as the module-loading public API The FT_Driver type is still defined, and still represents a pointer to a font driver. Note that FT_Add_Driver is replaced by FT_Add_Module, FT_Get_Driver by FT_Get_Module, etc.. - support for generic glyph image types: The FT_Renderer type is a pointer to a module used to perform various operations on glyph image. Each renderer is capable of handling images in a single format (e.g. ft_glyph_format_outline). Its functions are used to: - transform an glyph image - render a glyph image into a bitmap - return the control box (dimensions) of a given glyph image The scan converters "ftraster.c" and "ftgrays.c" have been moved to the new directory "src/renderer", and are used to provide two default renderer modules. One corresponds to the "standard" scan-converter, the other to the "smooth" one. The current renderer can be set through the new function FT_Set_Renderer. The old raster-related function FT_Set_Raster, FT_Get_Raster and FT_Set_Raster_Mode have now disappeared, in favor of the new: FT_Get_Renderer FT_Set_Renderer see the file <freetype/ftrender.h> for more details.. These changes were necessary to properly support different scalable formats in the future, like bi-color glyphs, etc.. - glyph loader object: A new internal object, called a 'glyph loader' has been introduced in the base layer. It is used by all scalable format font drivers to load glyphs and composites. This object has been created to reduce the code size of each driver, as each one of them basically re-implemented its functionality. See <freetype/internal/ftobjs.h> and the FT_GlyphLoader type for more information.. - FT_GlyphSlot had new fields: In order to support extended features (see below), the FT_GlyphSlot structure has a few new fields: linearHoriAdvance: this field gives the linearly scaled (i.e. scaled but unhinted) advance width for the glyph, expressed as a 16.16 fixed pixel value. This is useful to perform WYSIWYG text. linearVertAdvance: this field gives the linearly scaled advance height for the glyph (relevant in vertical glyph layouts only). This is useful to perform WYSIWYG text. Note that the two above field replace the removed "metrics2" field in the glyph slot. advance: this field is a vector that gives the transformed advance for the glyph. By default, it corresponds to the advance width, unless FT_LOAD_VERTICAL_LAYOUT was specified when calling FT_Load_Glyph or FT_Load_Char bitmap_left: this field gives the distance in integer pixels from the current pen position to the left-most pixel of a glyph image WHEN IT IS A BITMAP. It is only valid when the "format" field is set to "ft_glyph_format_bitmap", for example, after calling the new function FT_Render_Glyph. bitmap_top: this field gives the distance in integer pixels from the current pen position (located on the baseline) to the top-most pixel of the glyph image WHEN IT IS A BITMAP. Positive values correspond to upwards Y. loader: this is a new private field for the glyph slot. Client applications should not touch it.. - support for transforms and direct rendering in FT_Load_Glyph: Most of the functionality found in <freetype/ftglyph.h> has been moved to the core library. Hence, the following: - a transform can be specified for a face through FT_Set_Transform. this transform is applied by FT_Load_Glyph to scalable glyph images (i.e. NOT TO BITMAPS) before the function returns, unless the bit flag FT_LOAD_IGNORE_TRANSFORM was set in the load flags.. - once a glyph image has been loaded, it can be directly converted to a bitmap by using the new FT_Render_Glyph function. Note that this function takes the glyph image from the glyph slot, and converts it to a bitmap whose properties are returned in "face.glyph.bitmap", "face.glyph.bitmap_left" and "face.glyph.bitmap_top". The original native image might be lost after the conversion. - when using the new bit flag FT_LOAD_RENDER, the FT_Load_Glyph and FT_Load_Char functions will call FT_Render_Glyph automatically when needed.
9ca2af38	2000-06-21T03:03:28	A new formatting orgy. Added some `#if 0' to completely disable the CID AFM stuff. In case this is not correct please fix.
f9b8dec4	2000-06-16T19:34:52	major reformatting of the modules source code in order to get rid of most of the basic types redefinitions (i.e. FT_Int instead of "FT_Int", etc..) The format-specific prefixs like "TT_", "T1_", "T2_" & 'CID_" are now only used in relevant structures.. fixed Werner's fix to t2gload.c :-) other small bug fixes
7a4fda88	2000-06-13T23:21:00	The next round of formatting, checking documentation, etc.
78575dc0	2000-06-12T19:36:41	A lot of formatting. Added more tracing levels. More Makefile fixes. Minor other changes.
e35cac66	2000-06-11T03:46:57	A complete revision of FreeType 2's GNU makefiles (of the library): Tons of unnecessary stuff have been removed; only the essential rules have been retained. The source files now depend on all header files in include/freetype, include/freetype/config, and include/freetype/internal. This is not optimal, I know, and I'll try to improve this, but it is better than before (namely no dependencies on `internal'). FTDEBUG_SRC has been added (similar to FTSYS_SRC) -- I don't know exactly whether this is really useful, but it doesn't harm. There is now more documentation in the makefiles itself. io-frames.html: Use of <th>, <code>, and <var> for better tagging. Reactivating of FT_DEBUG_LEVEL_xxx macros. Added a lot of #include directives to make `multi' builds possible -- note that currently the modules cid, t1, and t1z have clashing structures and functions which means that you can only use one of these three modules for a multi build. Added some missing function declarations to (local) header files. Renamed some T1_Open_Face() to CID_Open_Face() in the cid module -- a lot of other functions should be renamed also... Replaced many FT_xxx stuff with T1_xxx in t1z driver -- this isn't finished yet... Fixed FT_Free() to allow a NULL pointer without an assertion (this has always been a valid assumption in FreeType, at least in FT 1.x). A lot of other, minor fixes (mostly documentation).
b770a4ab	2000-06-07T20:06:18	bug fix, suggested by Tor Lillqvist
e1d5dd78	2000-06-07T04:48:12	Moved all *errors.h header files to include/freetype/internal for consistency. Removed unused error message.
61bd4b9d	2000-06-07T00:00:08	Added FT_FRAME_SKIP_xxx to skip fields. More use of READ_Fields() in ttsbit.c Other minor fixes.
1c0d4acb	2000-06-06T20:41:48	Fine-tuned a lot of tracing levels to make them more functional with ftview. Added a lot of \n to tracing messages. Fixed a serious bug in loading SBit offsets (missing parentheses around a xxx ? yyy : zzz construct). Replaced most GET_xxx() functions with calls to READ_Frame() in ttsbit.c
920d41e0	2000-06-05T14:32:32	Removing trailing whitespace.
4e6dd858	2000-06-05T05:26:15	freetype.h: Adding ft_encoding_xxx values for some CJK encodings. Fixing copyright notice on many files. Changed some tracing levels. A lot of formatting, fixing documentation etc. as usual.
56177261	2000-06-03T21:59:44	ftview now has two new options: -d activates debugging, and -l sets the trace level. Since FT2 is still beta, I've activated the FT_DEBUG_xxx macros by default. To make reasonable output, I've changed some TRACEx macros to other levels.
3581d064	2000-06-01T03:26:58	changed the SFNT format check to make it less strict. A certain number of TrueType fonts have invalid values in the SFNT header..
b1677a87	2000-05-29T20:37:41	changed the SFNT driver slightly to add more robust checking based on the "search_rang", etc.., fields of the sfnt header.. This avoids problems (like certain Type 1 multiple masters incorrectly recognized as trueType files)..
241e151e	2000-05-28T17:15:37	oops, forgot to commit these files
2e421319	2000-05-26T22:13:17	moved a lot of things from the TrueType driver to the SFNT module (whose interface has changed, by the way) This allows even more code re-use between TrueType and OpenType formats..
11187206	2000-05-26T17:13:23	finalised the multiple masters support fixed some nasty little bugs too
1fb6eea7	2000-05-24T00:31:14	EXPORT_DEF renamed to FT_EXPORT_DEF + reformating/spacing
5e4c2cb3	2000-05-22T16:25:14	fixed some header files inclusions added C++ stubs to public header files
51179f0a	2000-05-18T16:18:05	some fixes for 64-bit systems. Mainly changed some FT_TRACE calls to use %p instead of %lx when dumping a pointer address
109fcf60	2000-05-17T23:35:37	fixed the sbit loader (src/base/sfnt/ttsbit.c) introduced a new load flag (FT_LOAD_CROP_BITMAP) used to indicate that we want embedded bitmaps to be cropped.. Thanks a lot to Yamano-uchi, Hidetoshi
e49ab25c	2000-05-16T23:44:38	formatting - removed trailing spaces
c60c61c6	2000-05-12T15:26:58	fixed a potential memory leak when loading embedded bitmaps
c30aea98	2000-05-12T15:01:18	another massive changes in order to completely avoid compiler warnings with GCC + "-ansi -pedantic -Wall -W" and LCC. Also fixed the compilation of "type1z" with Win32-LCC (its pre-processor is broken !!) Updated the BUILD document too
bfe2f98f	2000-05-12T12:17:15	a new massive grunt work. Redefined the EXPORT_DEF, EXPORT_FUNC, BASE_DEF and BASE_FUNC macros to let them take an argument.. This is needed to compile the library as a DLL on some platforms that have different compiler conventions..
2561b245	2000-05-11T18:47:39	I knew the first CVS commit wouldn't be good :o) Here, the build system seems to be cured now.. (I'll need to try it on Unix too though..)
efce08d6	2000-05-11T18:23:52	major re-organisation of the FreeType 2 directory hierarchy
d186a361	2000-05-02T17:41:41	various updates to reduce the compilation warnings
1119baee	2000-05-02T11:01:49	added support for version 2 of the OS/2 table five additional fields (see OT Spec 1.2)
14d340ce	2000-03-17T23:33:07	fixed a _really_ stupid bugs in the TrueType Collection loading !!
7f7aadf4	2000-03-13T12:57:27	finished moving all configuration macros to "config/ftoption.h"
3246efed	2000-03-13T12:12:46	first step towards moving all configuration options to the single "config/ftoption.h"
e98e4af7	2000-03-06T17:01:07	fixed a nasty bug that occured with CMAP format 4..
febe3fbe	2000-03-05T01:14:19	A first check of FT2's Make system. Many smaller and larger bugs have been fixed: . Removing unused variables. . detect.mk files now must provide $(CONFIG_FILE) and not $(CONFIG_RULE). . ansi.mk will now be really used as a fallback if the detect mechanism fails. . ANSIFLAGS will now be really used (fixing a typo). . `make clean' now works (again two typos). . Detection of gcc on Unix has been fixed (using the `-v' option instead of `--version'). . `make devel' now works (on Unix). . Fixing again a bug in demos/graph/x11/rules.mk to allow multiple use of `-L' compiler options. . $(BASE_H) now contains a few more header files. As usual, a lot of formatting (not finished yet).
ca13392d	2000-03-01T13:24:38	a few changes to really compile font drivers in independent single objects..
63cb46dd	2000-02-22T13:34:26	simple fixes
a56489e0	2000-02-13T13:41:56	The code has been updated to use the finite-state table loader in "ftstream" (when the macro READ_FIELDS) is defined. This is experimental..
33263421	2000-02-13T13:38:45	formatting
7433655c	2000-02-10T19:14:48	Some changes. The SFNT driver is able to return Postscript glyph names even when the "psnames" module is not used..
c3122c98	2000-02-10T19:11:30	added some comments
d42c68e8	2000-01-27T13:56:02	many new small, but important, changes there: - modified the interface of the "sfnt" module. There is now a function called "load_format_tag", and another called "load_directory". The first one is in charge of returning the 4-byte tag located at the beginning of a given font file. It understand TrueType collections and parses them automatically The second loads the table directory that is located just after the format tag. This is useful, because the "SFNT" storage scheme can be used by several distinct formats, each with its own format tag. The TrueType driver now checks the format tag in "src/truetype/ttobjs.c" - made some changes to "src/shared/t1types.h" to clearly separate the Type 1 font content from the rest of the T1_Face structure. This will be useful when adding the CFF/Type2 driver that will be able to reuse the "T1_Font" structure within a "TT_Font" one (which really describes a SFNT-based font file). Some changes in "src/type1" were thus performed to reflect this. Note that the current type1 driver will be discontinued in a distant future. More on this later..
3ba47068	2000-01-17T11:25:57	some updates to the "rules.mk" files. Basically, we now use "$(FT_COMPILE)" instead of "$(FT_CC)" in order to compile the library. $(FT_COMPILE) uses the $(ANSI_FLAGS) variable used to define ANSI-compliance flags for the current compiler. It is used to compile the library exclusively (some demo programs will _not_ compile properly with these flags set).
40b4ef1e	2000-01-12T22:44:03	Remove double increment of charmap.
10effdf6	1999-12-29T00:22:24	Added the rules files `module.mk' to "sfnt", "truetype" and "type1" to reflect the new modules/drivers list management performed through the file `freetype2/config/modules.mk' Changed the driver header files to reflect the new modules/drivers list management. We get rid, at last, of the infamous pre-processor tricks used to build the list at compile time. `src/base/ftinit.c' is also modified to reflect the changes..
d2b1f357	1999-12-16T23:11:37	Initial revision

d3c8e064

2000-12-04T22:53:55

- updating the header inclusion scheme to use <ft2build.h> by default.. - created "builds/devel" to hold developer builds options for both Win32 and Unix - fixed a bug in the winfonts driver, where the glyph image format wasn't set correctly..

b1aabf4c

2000-11-30T23:48:22

- added support for the free command-line Borland C++ compiler in the "builds" directory - modified a few files because BCC32 didn't like certain comparisons (UInt compared with a UShort, apparently the UShort is promoted to an Int) - updated the INSTALL file to include IDE compilation, prevent against BSD Make, and clarify the use of "make setup" (instead of "make") for build configuration

f1ca2344

2000-11-29T15:18:54

* src/sfnt/sfdriver.c: Include ttsbit.h and ttpost.h only conditionally. * src/truetype/ttdriver.c (Set_Char_Sizes, Set_Pixel_Sizes): Set `size->strike_index' only conditionally. * src/type1/t1driver.c, src/type1/t1objs.c: Include t1afm.h only conditionally. * src/winfonts/winfnt.h: Move all type definitions to... * src/include/freetype/internal/fnttypes.h: New file. * src/winfonts/winfnt.c: Use it. * include/freetype/internal/ftdebug.h: Replaced FT_CAT and FT_XCAT with a direct solution (which also satifies picky compilers).

34e52707

2000-11-13T16:58:01

Formatting; removing tabs.

200a1a41

2000-11-13T07:31:21

In function TT_Load_Generic_Header, change tracing output to indicate if a `bhed' or `head' table is being read. In function TT_LookUp_Table, change tracing output to indicate success or failure of table loading, and place output on one line.

e0bd0c01

2000-11-13T07:26:31

In function SFNT_Load_Face, set has_outline to true only if the font has a `CFF ' or `glyf' table.

90a03301

2000-11-07T17:21:11

All function comments are now removed from source files (and moved to the header files if necessary). Some minor fixes to have `make multi' run successfully (with gcc and g++). Fixing compiler warnings.

4b68007b

2000-11-07T06:30:29

Complementing David's changes with formatting, adding documentation, etc. More `*'-convention formatting, adding the `a' resp. `an' prefix to variables.

f96594fa

2000-11-06T23:07:51

integrated Yamano-Uchi changes to the base source code. However, I've made a few modifications: - there is no new field named "driver" in "FT_SizeRec" - the new fields in "TT_SizeRec" are: strike_index :: value 0xFFFF means "no sbit strike selected" strike_metrics :: the FT_Size_Metrics structure corresponding to the currently selected strike - the code in "ttload.c" has been somewhat cleaned up too thanks a lot, Y-U !! - David

dc72aff4

2000-11-04T08:33:38

Finishing David's latest changes (there were some errors in it).

54e75749

2000-11-04T02:52:02

defining new types to hold "internal" fields of public objects: FT_Face_Internal, FT_Size_Internal, FT_Slot_Internal these contain some fields that may change between releases of FreeType, without affecting the size of FT_FaceRec, FT_SizeRec, FT_GlyphSlotRec, etc.., which means that drivers wouldn't need to be recompiled if we only add new fields to an internal structure.. I plan to hack a few things related to the auto-hinter and I need this move to ensure that we will not break binary compatibility between 2.0 and 2.1 :-) - David

76a5f623

2000-11-04T01:55:49

major reformatting of the sources: FT_EXPORT_DEF => FT_EXPORT FT_EXPORT_FUNC => FT_EXPORT_DEF BASE_DEF => FT_BASE BASE_FUNC => FT_BASE_DEF LOCAL_DEF => FT_LOCAL LOCAL_FUNC => FT_LOCAL_DEF LOCAL_FUNC_X => FT_CALLBACK_DEF LOCAL_DEF_X => FT_CALLBACK_TABLE FT_CPLUSPLUS => FT_CALLBACK_TABLE_DEF

e4b32a5d

2000-10-31T20:42:18

Removing trailing whitespace.

ddbb8e7b

2000-10-26T10:04:16

Some formatting. Fixed some data types/added header files to remove compiler warnings. Added trivial input data check to FT_Outline_Get_BBox(). Fixed type1z -> type1 file inclusions.

47a5f41d

2000-10-17T03:38:43

Added copyright messages to all Makefiles. Added documentation to FT_Get_Sfnt_* stuff (in ftnames.[ch]) minor other doc fixes

1a2908bb

2000-09-21T14:10:23

Added support for (3,0) pid/eid.

21a27ee3

2000-09-01T14:36:39

Fixed a long outstanding bug with an incorrect offset for reading post tables.

4a5c142a

2000-08-29T18:37:25

Minor fixes.

5878a6d2

2000-08-29T16:03:01

a fix to the computation of the font "text height" (i.e. the baseline-to-baseline distance). Unfortunately, we cannot rely on the OS/2 fields, like sTypoAscender or usWinAscent to compute it. Rather, we only look at the horizontal header's content. In case the "line gap" is set to 0, we compute the text height as 115% of the ascender+descender value.. (this percentage is based on the values found in many Windows fonts).

24d7024c

2000-08-17T01:09:06

added draft "psaux" code the t1 driver now reads the complete font matrix and applies it (some fonts do not work properly without hinting though...)

9a814fab

2000-08-06T19:48:47

Yamano-uchi added support for SFNT-wrapped CID bitmap font files (with minor modifications from WL).

29a90e26

2000-08-03T00:03:08

Updating unix/ftconfig.in to recent config/ftconfig.h changes. More C++ fixes: Introducing LOCAL_FUNC_X for local functions used in function pointers (there are no local anonymous functions in C++) and FT_CPLUSPLUS (instead of FT_EXPORT_VAR) to define linkage of structures which contain function pointers.

3a89c2a4

2000-08-01T17:05:20

Removing FT_MAKE_OPTION_SINGLE_LIBRARY_OBJECT. It has never worked. Instead, define BASE_DEF() and BASE_FUNC() similarly to FT_EXPORT_DEF() and FT_EXPORT_FUNC(), respectively, allowing the programmer to define proper types and/or export lists for multiple DLLs if necessary (e.g. ftbase.dll -- standalone, fttype1.dll -- needs ftbase.dll, etc.). The library is finally compiling and linking natively with a C++ compiler!

c713d924

2000-08-01T13:17:04

Added #ifdef's for C++ to all header files.

b1dd3535

2000-07-31T22:51:00

Added autoconf tests FT_MUNMAP_DECL and FT_MUNMAP_PARAM to fix some devils. Updating unix/ftsystem.c accordingly. More warning fixes.

e72c9fec

2000-07-31T18:59:02

Simplifying the FIELD_* and FRAME_* macros. Before calling these macros, you should #define FT_STRUCTURE to the structure which will be filled. Replaced FT_FIELD_REF with FT_FIELD_SIZE, FT_FIELD_SIZE_DELTA, and FT_FIELD_OFFSET to make the code more readable; additionally, it should be more portable because we no longer cast a pointer to an FT_UShort (which e.g. fails with Sun's C++ compiler) but computes the difference between two pointers which is guaranteed to work. Fixing warnings (and C++ errors) while using Sun's latest cc and CC incarnations. Most of them are related to variable shadowing.

d060a75b

2000-07-20T06:57:41

Formatting. Rudimentary support for autoconf (still using GNU make) Say `make unix'.

6930b45f

2000-07-19T17:13:03

- introduced FT_Get_Glyph_Name (see freetype.h) to access individual glyph names. Changed some drivers to support it through a new interface named "glyph_name". - introduced FT_Get_Sfnt_Name (see ftnames.h) to access the SFNT name table in a TrueType/OpenType file..

e1bbc017

2000-07-19T06:25:56

Formatting. Fixing documentation.

c8f9cf37

2000-07-19T02:59:31

Formatting.

49bd4f05

2000-07-12T16:57:37

removed some warnings with Visual C++ that prevented compilation

7fa51b55

2000-07-08T19:51:42

Formatting. Adding some trivial error checking. Adding/Fixing tracing levels.

a90663f5

2000-07-08T00:41:13

vast clean-up of the sources in order to allow flat directory compilation (by defining the FT_FLAT_COMPILE macro at compile time..) moved "freetype2/BUILD" to "freetype2/docs/BUILD"

bd5ae400

2000-07-05T04:32:02

Run g++ on the FreeType library. This should make the use of code in C++ programs easier: Renamed FT_WordXX to FT_UIntXX. Changed a lot of void* to FT_Byte* if related to i/o streams -- FreeType always accesses streams byte-wise, so this makes sense IMHO. Added a lot of #ifdef __cplusplus to header files (and removed a few). Other minor syntax fixes (mostly casts). Replaced the variable `private' with `private_dict' -- `private' is reserved in C++.

c6a92202

2000-07-04T18:12:13

various clean-ups: - using FT_UNUSED instead of UNUSED - using FT_LONG64 and FT_INT64 instead of LONG64 & INT64 - using FT_SIZEOF_INT & FT_SIZEOF_LONG instead of... - removed the #ifdefs that used SIZEOF_INT, instead we now use FT_Int32 and FT_UInt32 when needed to support 32-bits quantity correctly on 64-bits systems..

aa8c7da0

2000-07-04T03:37:18

Don't use -lefence in the demo Makefile. Added C++ guards in ftmodule.h Fix error check in ftglyph.c Formatting; adding copyrights; fixing documentation

d18388e4

2000-07-03T15:00:49

fixed a few 64-bit related bugs in "sfnt/ttload.c" and "base/ftstream.c" Note that "TT_PCLT" was incorrectly defined in <freetype/tttables.h>

fbeb41d9

2000-07-02T00:27:53

Formatting. Adding copyright notices. Removing an unnecessary file (smooth.h).

a8bbc267

2000-07-01T14:06:46

Formatting as usual... Adding trivial argument checking to some functions. Added dynamic driver interface to cidriver. Minor `version' fixes for macfont and psnames modules. Removed unnecessary files

cc9fc49c

2000-06-30T06:21:26

Formatting... Applying some fixes from Tom.

32b85e67

2000-06-29T21:48:58

various bug fixes in the postscript font drivers (mainly they added one un-necessary point to each contour..)

deb4e983

2000-06-29T03:14:25

Formatting... Preprocessor lines now always start the line. Improved error handling in `base' module. Fixed a out-of-bounds error in ttgload.

9d636b6d

2000-06-27T23:32:27

various cleanups to reduce compiler warnings + support for CID-keyed fonts in the CFF driver (still some unexpected bugs though..)

a929ba9b

2000-06-25T06:47:11

applying formatting again

f0df85ba

2000-06-22T00:17:42

- MAJOR INTERNAL REDESIGN: A lot of internal modifications have been performed lately on the source in order to provide the following enhancements: - more generic module support: The FT_Module type is now defined to represent a handle to a given module. The file <freetype/ftmodule.h> contains the FT_Module_Class definition, as well as the module-loading public API The FT_Driver type is still defined, and still represents a pointer to a font driver. Note that FT_Add_Driver is replaced by FT_Add_Module, FT_Get_Driver by FT_Get_Module, etc.. - support for generic glyph image types: The FT_Renderer type is a pointer to a module used to perform various operations on glyph image. Each renderer is capable of handling images in a single format (e.g. ft_glyph_format_outline). Its functions are used to: - transform an glyph image - render a glyph image into a bitmap - return the control box (dimensions) of a given glyph image The scan converters "ftraster.c" and "ftgrays.c" have been moved to the new directory "src/renderer", and are used to provide two default renderer modules. One corresponds to the "standard" scan-converter, the other to the "smooth" one. The current renderer can be set through the new function FT_Set_Renderer. The old raster-related function FT_Set_Raster, FT_Get_Raster and FT_Set_Raster_Mode have now disappeared, in favor of the new: FT_Get_Renderer FT_Set_Renderer see the file <freetype/ftrender.h> for more details.. These changes were necessary to properly support different scalable formats in the future, like bi-color glyphs, etc.. - glyph loader object: A new internal object, called a 'glyph loader' has been introduced in the base layer. It is used by all scalable format font drivers to load glyphs and composites. This object has been created to reduce the code size of each driver, as each one of them basically re-implemented its functionality. See <freetype/internal/ftobjs.h> and the FT_GlyphLoader type for more information.. - FT_GlyphSlot had new fields: In order to support extended features (see below), the FT_GlyphSlot structure has a few new fields: linearHoriAdvance: this field gives the linearly scaled (i.e. scaled but unhinted) advance width for the glyph, expressed as a 16.16 fixed pixel value. This is useful to perform WYSIWYG text. linearVertAdvance: this field gives the linearly scaled advance height for the glyph (relevant in vertical glyph layouts only). This is useful to perform WYSIWYG text. Note that the two above field replace the removed "metrics2" field in the glyph slot. advance: this field is a vector that gives the transformed advance for the glyph. By default, it corresponds to the advance width, unless FT_LOAD_VERTICAL_LAYOUT was specified when calling FT_Load_Glyph or FT_Load_Char bitmap_left: this field gives the distance in integer pixels from the current pen position to the left-most pixel of a glyph image WHEN IT IS A BITMAP. It is only valid when the "format" field is set to "ft_glyph_format_bitmap", for example, after calling the new function FT_Render_Glyph. bitmap_top: this field gives the distance in integer pixels from the current pen position (located on the baseline) to the top-most pixel of the glyph image WHEN IT IS A BITMAP. Positive values correspond to upwards Y. loader: this is a new private field for the glyph slot. Client applications should not touch it.. - support for transforms and direct rendering in FT_Load_Glyph: Most of the functionality found in <freetype/ftglyph.h> has been moved to the core library. Hence, the following: - a transform can be specified for a face through FT_Set_Transform. this transform is applied by FT_Load_Glyph to scalable glyph images (i.e. NOT TO BITMAPS) before the function returns, unless the bit flag FT_LOAD_IGNORE_TRANSFORM was set in the load flags.. - once a glyph image has been loaded, it can be directly converted to a bitmap by using the new FT_Render_Glyph function. Note that this function takes the glyph image from the glyph slot, and converts it to a bitmap whose properties are returned in "face.glyph.bitmap", "face.glyph.bitmap_left" and "face.glyph.bitmap_top". The original native image might be lost after the conversion. - when using the new bit flag FT_LOAD_RENDER, the FT_Load_Glyph and FT_Load_Char functions will call FT_Render_Glyph automatically when needed.

9ca2af38

2000-06-21T03:03:28

A new formatting orgy. Added some `#if 0' to completely disable the CID AFM stuff. In case this is not correct please fix.

f9b8dec4

2000-06-16T19:34:52

major reformatting of the modules source code in order to get rid of most of the basic types redefinitions (i.e. FT_Int instead of "FT_Int", etc..) The format-specific prefixs like "TT_", "T1_", "T2_" & 'CID_" are now only used in relevant structures.. fixed Werner's fix to t2gload.c :-) other small bug fixes

7a4fda88

2000-06-13T23:21:00

The next round of formatting, checking documentation, etc.

78575dc0

2000-06-12T19:36:41

A lot of formatting. Added more tracing levels. More Makefile fixes. Minor other changes.

e35cac66

2000-06-11T03:46:57

A complete revision of FreeType 2's GNU makefiles (of the library): Tons of unnecessary stuff have been removed; only the essential rules have been retained. The source files now depend on all header files in include/freetype, include/freetype/config, and include/freetype/internal. This is not optimal, I know, and I'll try to improve this, but it is better than before (namely no dependencies on `internal'). FTDEBUG_SRC has been added (similar to FTSYS_SRC) -- I don't know exactly whether this is really useful, but it doesn't harm. There is now more documentation in the makefiles itself. io-frames.html: Use of <th>, <code>, and <var> for better tagging. Reactivating of FT_DEBUG_LEVEL_xxx macros. Added a lot of #include directives to make `multi' builds possible -- note that currently the modules cid, t1, and t1z have clashing structures and functions which means that you can only use one of these three modules for a multi build. Added some missing function declarations to (local) header files. Renamed some T1_Open_Face() to CID_Open_Face() in the cid module -- a lot of other functions should be renamed also... Replaced many FT_xxx stuff with T1_xxx in t1z driver -- this isn't finished yet... Fixed FT_Free() to allow a NULL pointer without an assertion (this has always been a valid assumption in FreeType, at least in FT 1.x). A lot of other, minor fixes (mostly documentation).

b770a4ab

2000-06-07T20:06:18

bug fix, suggested by Tor Lillqvist

e1d5dd78

2000-06-07T04:48:12

Moved all *errors.h header files to include/freetype/internal for consistency. Removed unused error message.

61bd4b9d

2000-06-07T00:00:08

Added FT_FRAME_SKIP_xxx to skip fields. More use of READ_Fields() in ttsbit.c Other minor fixes.

1c0d4acb

2000-06-06T20:41:48

Fine-tuned a lot of tracing levels to make them more functional with ftview. Added a lot of \n to tracing messages. Fixed a serious bug in loading SBit offsets (missing parentheses around a xxx ? yyy : zzz construct). Replaced most GET_xxx() functions with calls to READ_Frame() in ttsbit.c

920d41e0

2000-06-05T14:32:32

Removing trailing whitespace.

4e6dd858

2000-06-05T05:26:15

freetype.h: Adding ft_encoding_xxx values for some CJK encodings. Fixing copyright notice on many files. Changed some tracing levels. A lot of formatting, fixing documentation etc. as usual.

56177261

2000-06-03T21:59:44

ftview now has two new options: -d activates debugging, and -l sets the trace level. Since FT2 is still beta, I've activated the FT_DEBUG_xxx macros by default. To make reasonable output, I've changed some TRACEx macros to other levels.

3581d064

2000-06-01T03:26:58

changed the SFNT format check to make it less strict. A certain number of TrueType fonts have invalid values in the SFNT header..

b1677a87

2000-05-29T20:37:41

changed the SFNT driver slightly to add more robust checking based on the "search_rang", etc.., fields of the sfnt header.. This avoids problems (like certain Type 1 multiple masters incorrectly recognized as trueType files)..

241e151e

2000-05-28T17:15:37

oops, forgot to commit these files

2e421319

2000-05-26T22:13:17

moved a lot of things from the TrueType driver to the SFNT module (whose interface has changed, by the way) This allows even more code re-use between TrueType and OpenType formats..

11187206

2000-05-26T17:13:23

finalised the multiple masters support fixed some nasty little bugs too

1fb6eea7

2000-05-24T00:31:14

EXPORT_DEF renamed to FT_EXPORT_DEF + reformating/spacing

5e4c2cb3

2000-05-22T16:25:14

fixed some header files inclusions added C++ stubs to public header files

51179f0a

2000-05-18T16:18:05

some fixes for 64-bit systems. Mainly changed some FT_TRACE calls to use %p instead of %lx when dumping a pointer address

109fcf60

2000-05-17T23:35:37

fixed the sbit loader (src/base/sfnt/ttsbit.c) introduced a new load flag (FT_LOAD_CROP_BITMAP) used to indicate that we want embedded bitmaps to be cropped.. Thanks a lot to Yamano-uchi, Hidetoshi

e49ab25c

2000-05-16T23:44:38

formatting - removed trailing spaces

c60c61c6

2000-05-12T15:26:58

fixed a potential memory leak when loading embedded bitmaps

c30aea98

2000-05-12T15:01:18

another massive changes in order to completely avoid compiler warnings with GCC + "-ansi -pedantic -Wall -W" and LCC. Also fixed the compilation of "type1z" with Win32-LCC (its pre-processor is broken !!) Updated the BUILD document too

bfe2f98f

2000-05-12T12:17:15

a new massive grunt work. Redefined the EXPORT_DEF, EXPORT_FUNC, BASE_DEF and BASE_FUNC macros to let them take an argument.. This is needed to compile the library as a DLL on some platforms that have different compiler conventions..

2561b245

2000-05-11T18:47:39

I knew the first CVS commit wouldn't be good :o) Here, the build system seems to be cured now.. (I'll need to try it on Unix too though..)

efce08d6

2000-05-11T18:23:52

major re-organisation of the FreeType 2 directory hierarchy

d186a361

2000-05-02T17:41:41

various updates to reduce the compilation warnings

1119baee

2000-05-02T11:01:49

added support for version 2 of the OS/2 table five additional fields (see OT Spec 1.2)

14d340ce

2000-03-17T23:33:07

fixed a _really_ stupid bugs in the TrueType Collection loading !!

7f7aadf4

2000-03-13T12:57:27

finished moving all configuration macros to "config/ftoption.h"

3246efed

2000-03-13T12:12:46

first step towards moving all configuration options to the single "config/ftoption.h"

e98e4af7

2000-03-06T17:01:07

fixed a nasty bug that occured with CMAP format 4..

febe3fbe

2000-03-05T01:14:19

A first check of FT2's Make system. Many smaller and larger bugs have been fixed: . Removing unused variables. . detect.mk files now must provide $(CONFIG_FILE) and not $(CONFIG_RULE). . ansi.mk will now be really used as a fallback if the detect mechanism fails. . ANSIFLAGS will now be really used (fixing a typo). . `make clean' now works (again two typos). . Detection of gcc on Unix has been fixed (using the `-v' option instead of `--version'). . `make devel' now works (on Unix). . Fixing *again* a bug in demos/graph/x11/rules.mk to allow multiple use of `-L' compiler options. . $(BASE_H) now contains a few more header files. As usual, a lot of formatting (not finished yet).

ca13392d

2000-03-01T13:24:38

a few changes to really compile font drivers in independent single objects..

63cb46dd

2000-02-22T13:34:26

simple fixes

a56489e0

2000-02-13T13:41:56

The code has been updated to use the finite-state table loader in "ftstream" (when the macro READ_FIELDS) is defined. This is experimental..

33263421

2000-02-13T13:38:45

formatting

7433655c

2000-02-10T19:14:48

Some changes. The SFNT driver is able to return Postscript glyph names even when the "psnames" module is not used..

c3122c98

2000-02-10T19:11:30

added some comments

d42c68e8

2000-01-27T13:56:02

many new small, but important, changes there: - modified the interface of the "sfnt" module. There is now a function called "load_format_tag", and another called "load_directory". The first one is in charge of returning the 4-byte tag located at the beginning of a given font file. It understand TrueType collections and parses them automatically The second loads the table directory that is located just after the format tag. This is useful, because the "SFNT" storage scheme can be used by several distinct formats, each with its own format tag. The TrueType driver now checks the format tag in "src/truetype/ttobjs.c" - made some changes to "src/shared/t1types.h" to clearly separate the Type 1 font content from the rest of the T1_Face structure. This will be useful when adding the CFF/Type2 driver that will be able to reuse the "T1_Font" structure within a "TT_Font" one (which really describes a SFNT-based font file). Some changes in "src/type1" were thus performed to reflect this. Note that the current type1 driver will be discontinued in a distant future. More on this later..

3ba47068

2000-01-17T11:25:57

some updates to the "rules.mk" files. Basically, we now use "$(FT_COMPILE)" instead of "$(FT_CC)" in order to compile the library. $(FT_COMPILE) uses the $(ANSI_FLAGS) variable used to define ANSI-compliance flags for the current compiler. It is used to compile the library exclusively (some demo programs will _not_ compile properly with these flags set).

40b4ef1e

2000-01-12T22:44:03

Remove double increment of charmap.

10effdf6

1999-12-29T00:22:24

Added the rules files `module.mk' to "sfnt", "truetype" and "type1" to reflect the new modules/drivers list management performed through the file `freetype2/config/modules.mk' Changed the driver header files to reflect the new modules/drivers list management. We get rid, at last, of the infamous pre-processor tricks used to build the list at compile time. `src/base/ftinit.c' is also modified to reflect the changes..

d2b1f357

1999-12-16T23:11:37

Initial revision

kc3-lang/freetype/src/sfnt

src/sfnt

Log