|
b1aabf4c
|
2000-11-30T23:48:22
|
|
- added support for the free command-line Borland C++ compiler
in the "builds" directory
- modified a few files because BCC32 didn't like certain comparisons
(UInt compared with a UShort, apparently the UShort is promoted to
an Int)
- updated the INSTALL file to include IDE compilation, prevent against
BSD Make, and clarify the use of "make setup" (instead of "make")
for build configuration
|
|
4b68007b
|
2000-11-07T06:30:29
|
|
Complementing David's changes with formatting, adding documentation, etc.
More `*'-convention formatting, adding the `a' resp. `an' prefix to
variables.
|
|
|
f96594fa
|
2000-11-06T23:07:51
|
|
integrated Yamano-Uchi changes to the base source code. However,
I've made a few modifications:
- there is no new field named "driver" in "FT_SizeRec"
- the new fields in "TT_SizeRec" are:
strike_index :: value 0xFFFF means "no sbit strike selected"
strike_metrics :: the FT_Size_Metrics structure corresponding to
the currently selected strike
- the code in "ttload.c" has been somewhat cleaned up too
thanks a lot, Y-U !!
- David
|
|
|
76a5f623
|
2000-11-04T01:55:49
|
|
major reformatting of the sources:
FT_EXPORT_DEF => FT_EXPORT
FT_EXPORT_FUNC => FT_EXPORT_DEF
BASE_DEF => FT_BASE
BASE_FUNC => FT_BASE_DEF
LOCAL_DEF => FT_LOCAL
LOCAL_FUNC => FT_LOCAL_DEF
LOCAL_FUNC_X => FT_CALLBACK_DEF
LOCAL_DEF_X => FT_CALLBACK_TABLE
FT_CPLUSPLUS => FT_CALLBACK_TABLE_DEF
|
|
|
9a814fab
|
2000-08-06T19:48:47
|
|
Yamano-uchi added support for SFNT-wrapped CID bitmap font files (with
minor modifications from WL).
|
|
|
b1dd3535
|
2000-07-31T22:51:00
|
|
Added autoconf tests FT_MUNMAP_DECL and FT_MUNMAP_PARAM to fix some devils.
Updating unix/ftsystem.c accordingly.
More warning fixes.
|
|
|
e72c9fec
|
2000-07-31T18:59:02
|
|
Simplifying the FIELD_* and FRAME_* macros. Before calling these macros,
you should #define FT_STRUCTURE to the structure which will be filled.
Replaced FT_FIELD_REF with FT_FIELD_SIZE, FT_FIELD_SIZE_DELTA, and
FT_FIELD_OFFSET to make the code more readable; additionally, it should be
more portable because we no longer cast a pointer to an FT_UShort (which
e.g. fails with Sun's C++ compiler) but computes the difference between two
pointers which is guaranteed to work.
Fixing warnings (and C++ errors) while using Sun's latest cc and CC
incarnations. Most of them are related to variable shadowing.
|
|
|
7fa51b55
|
2000-07-08T19:51:42
|
|
Formatting.
Adding some trivial error checking.
Adding/Fixing tracing levels.
|
|
|
a90663f5
|
2000-07-08T00:41:13
|
|
vast clean-up of the sources in order to allow flat
directory compilation (by defining the FT_FLAT_COMPILE
macro at compile time..)
moved "freetype2/BUILD" to "freetype2/docs/BUILD"
|
|
|
fbeb41d9
|
2000-07-02T00:27:53
|
|
Formatting.
Adding copyright notices.
Removing an unnecessary file (smooth.h).
|
|
|
a929ba9b
|
2000-06-25T06:47:11
|
|
applying formatting again
|
|
|
f0df85ba
|
2000-06-22T00:17:42
|
|
- MAJOR INTERNAL REDESIGN:
A lot of internal modifications have been performed lately on the
source in order to provide the following enhancements:
- more generic module support:
The FT_Module type is now defined to represent a handle to a given
module. The file <freetype/ftmodule.h> contains the FT_Module_Class
definition, as well as the module-loading public API
The FT_Driver type is still defined, and still represents a pointer
to a font driver. Note that FT_Add_Driver is replaced by FT_Add_Module,
FT_Get_Driver by FT_Get_Module, etc..
- support for generic glyph image types:
The FT_Renderer type is a pointer to a module used to perform various
operations on glyph image.
Each renderer is capable of handling images in a single format
(e.g. ft_glyph_format_outline). Its functions are used to:
- transform an glyph image
- render a glyph image into a bitmap
- return the control box (dimensions) of a given glyph image
The scan converters "ftraster.c" and "ftgrays.c" have been moved
to the new directory "src/renderer", and are used to provide two
default renderer modules.
One corresponds to the "standard" scan-converter, the other to the
"smooth" one.
The current renderer can be set through the new function
FT_Set_Renderer.
The old raster-related function FT_Set_Raster, FT_Get_Raster and
FT_Set_Raster_Mode have now disappeared, in favor of the new:
FT_Get_Renderer
FT_Set_Renderer
see the file <freetype/ftrender.h> for more details..
These changes were necessary to properly support different scalable
formats in the future, like bi-color glyphs, etc..
- glyph loader object:
A new internal object, called a 'glyph loader' has been introduced
in the base layer. It is used by all scalable format font drivers
to load glyphs and composites.
This object has been created to reduce the code size of each driver,
as each one of them basically re-implemented its functionality.
See <freetype/internal/ftobjs.h> and the FT_GlyphLoader type for
more information..
- FT_GlyphSlot had new fields:
In order to support extended features (see below), the FT_GlyphSlot
structure has a few new fields:
linearHoriAdvance: this field gives the linearly scaled (i.e.
scaled but unhinted) advance width for the glyph,
expressed as a 16.16 fixed pixel value. This
is useful to perform WYSIWYG text.
linearVertAdvance: this field gives the linearly scaled advance
height for the glyph (relevant in vertical glyph
layouts only). This is useful to perform
WYSIWYG text.
Note that the two above field replace the removed "metrics2" field
in the glyph slot.
advance: this field is a vector that gives the transformed
advance for the glyph. By default, it corresponds
to the advance width, unless FT_LOAD_VERTICAL_LAYOUT
was specified when calling FT_Load_Glyph or FT_Load_Char
bitmap_left: this field gives the distance in integer pixels from
the current pen position to the left-most pixel of
a glyph image WHEN IT IS A BITMAP. It is only valid
when the "format" field is set to
"ft_glyph_format_bitmap", for example, after calling
the new function FT_Render_Glyph.
bitmap_top: this field gives the distance in integer pixels from
the current pen position (located on the baseline) to
the top-most pixel of the glyph image WHEN IT IS A
BITMAP. Positive values correspond to upwards Y.
loader: this is a new private field for the glyph slot. Client
applications should not touch it..
- support for transforms and direct rendering in FT_Load_Glyph:
Most of the functionality found in <freetype/ftglyph.h> has been
moved to the core library. Hence, the following:
- a transform can be specified for a face through FT_Set_Transform.
this transform is applied by FT_Load_Glyph to scalable glyph images
(i.e. NOT TO BITMAPS) before the function returns, unless the
bit flag FT_LOAD_IGNORE_TRANSFORM was set in the load flags..
- once a glyph image has been loaded, it can be directly converted to
a bitmap by using the new FT_Render_Glyph function. Note that this
function takes the glyph image from the glyph slot, and converts
it to a bitmap whose properties are returned in "face.glyph.bitmap",
"face.glyph.bitmap_left" and "face.glyph.bitmap_top". The original
native image might be lost after the conversion.
- when using the new bit flag FT_LOAD_RENDER, the FT_Load_Glyph
and FT_Load_Char functions will call FT_Render_Glyph automatically
when needed.
|
|
|
9ca2af38
|
2000-06-21T03:03:28
|
|
A new formatting orgy.
Added some `#if 0' to completely disable the CID AFM stuff. In case this is
not correct please fix.
|
|
|
f9b8dec4
|
2000-06-16T19:34:52
|
|
major reformatting of the modules source code in order to get
rid of most of the basic types redefinitions (i.e. FT_Int instead
of "FT_Int", etc..)
The format-specific prefixs like "TT_", "T1_", "T2_" & 'CID_"
are now only used in relevant structures..
fixed Werner's fix to t2gload.c :-)
other small bug fixes
|
|
|
7a4fda88
|
2000-06-13T23:21:00
|
|
The next round of formatting, checking documentation, etc.
|
|
|
78575dc0
|
2000-06-12T19:36:41
|
|
A lot of formatting.
Added more tracing levels.
More Makefile fixes.
Minor other changes.
|
|
|
e1d5dd78
|
2000-06-07T04:48:12
|
|
Moved all *errors.h header files to include/freetype/internal for
consistency.
Removed unused error message.
|
|
|
61bd4b9d
|
2000-06-07T00:00:08
|
|
Added FT_FRAME_SKIP_xxx to skip fields.
More use of READ_Fields() in ttsbit.c
Other minor fixes.
|
|
|
1c0d4acb
|
2000-06-06T20:41:48
|
|
Fine-tuned a lot of tracing levels to make them more functional with ftview.
Added a lot of \n to tracing messages.
Fixed a serious bug in loading SBit offsets (missing parentheses around a
xxx ? yyy : zzz construct).
Replaced most GET_xxx() functions with calls to READ_Frame() in ttsbit.c
|
|
|
920d41e0
|
2000-06-05T14:32:32
|
|
Removing trailing whitespace.
|
|
|
109fcf60
|
2000-05-17T23:35:37
|
|
fixed the sbit loader (src/base/sfnt/ttsbit.c)
introduced a new load flag (FT_LOAD_CROP_BITMAP) used
to indicate that we want embedded bitmaps to be cropped..
Thanks a lot to Yamano-uchi, Hidetoshi
|
|
|
e49ab25c
|
2000-05-16T23:44:38
|
|
formatting - removed trailing spaces
|
|
|
c60c61c6
|
2000-05-12T15:26:58
|
|
fixed a potential memory leak when loading embedded bitmaps
|
|
|
c30aea98
|
2000-05-12T15:01:18
|
|
another massive changes in order to completely avoid
compiler warnings with GCC + "-ansi -pedantic -Wall -W"
and LCC.
Also fixed the compilation of "type1z" with Win32-LCC
(its pre-processor is broken !!)
Updated the BUILD document too
|
|
|
efce08d6
|
2000-05-11T18:23:52
|
|
major re-organisation of the FreeType 2 directory hierarchy
|
|
|
d2b1f357
|
1999-12-16T23:11:37
|
|
Initial revision
|