|
b7b163cb
|
2002-03-31T18:48:24
|
|
* src/sfnt/ttcmap.c: 16bit fixes (0xFFFF -> 0xFFFFU).
* src/sfnt/ttcmap0.c: 16bit fixes.
(TT_Build_CMaps): Simplify debug messages.
(tt_cmap12_char_next): Fix offset.
* src/sfnt/ttload.c (TT_Load_Names, TT_Load_CMap): Fix debug
messages.
(TT_Load_OS2): 16bit fix.
|
|
e459d742
|
2002-03-22T13:52:37
|
|
* include/freetype/internal/ftmemory.h, and a lot of other files !!:
changed the names of memory macros. Examples:
MEM_Set => FT_MEM_SET
MEM_Copy => FT_MEM_COPY
MEM_Move => FT_MEM_MOVE
ALLOC => FT_ALLOC
FREE => FT_FREE
REALLOC = >FT_REALLOC
FT_NEW was introduced to allocate a new object from a _typed_
pointer..
note that ALLOC_ARRAY and REALLOC_ARRAY have been replaced
by FT_NEW_ARRAY and FT_RENEW_ARRAY which take _typed_ pointer
arguments.
This results in _lots_ of sources being changed, but makes the
code more generic and less error-prone..
|
|
a890c29c
|
2002-03-22T12:55:23
|
|
* include/freetype/internal/ftstream.h,
src/base/ftstream.c, src/cff/cffload.c, src/pcf/pcfread.c,
src/sfnt/ttcmap.c, src/sfnt/ttcmap0.c, src/sfnt/ttload.c,
src/sfnt/ttpost.c, src/sfnt/ttsbit.c,
src/truetype/ttgload.c, src/truetype/ttpload.c,
src/winfonts/winfnt.c:
changed the definitions of stream macros. Examples:
NEXT_Byte => FT_NEXT_BYTE
NEXT_Short => FT_NEXT_SHORT
NEXT_UShortLE => FT_NEXT_USHORT_LE
READ_Short => FT_READ_SHORT
GET_Long => FT_GET_LONG
etc..
also introduced the FT_PEEK_XXXX functions..
|
|
7d3a2642
|
2002-03-20T10:49:31
|
|
* renaming stream macros. Examples:
FILE_Skip => FT_STREAM_SKIP
FILE_Read => FT_STREAM_READ
ACCESS_Frame => FT_FRAME_ENTER
FORGET_Frame => FT_FRAME_EXIT
etc...
|
|
b5713c54
|
2002-03-14T11:26:29
|
|
* include/freetype/internal/psglobals.h (removed),
include/freetype/internal/pshints.h,
src/pshinter/pshglob.h: removing obsolete file
* include/freetype/internal/tttypes.h,
include/freetype/internal/sfnt.h,
src/base/ftnames.c, src/cff/cffdrivr.c,
src/sfnt/*.c, src/truetype/*.c: updated SFNT/TrueType type
definitions
|
|
bc82f1bb
|
2002-03-01T02:26:22
|
|
* include/freetype/ftconfig.h: changed FT_LOCAL xxxx to FT_LOCAL( xxxx )
everywhere in the source. Sames goes for FT_LOCAL_DEF xxxx translated
into FT_LOCAL_DEF( xxxxx )
|
|
cae232d4
|
2002-02-06T11:22:01
|
|
removing compiler warnings
|
|
0f7c2f1a
|
2002-02-04T20:55:58
|
|
Adding the function `FT_Get_Next_Char', doing the obvious thing
w.r.t. the selected charmap.
* include/freetype/freetype.h: Add prototype.
* include/freetype/internal/ftdriver.h: Add `FTDriver_getNextChar'
typedef.
(FT_Driver_Class): Use it.
* include/freetype/internal/psnames.h: Add `PS_Next_Unicode_Func'
typedef.
(PSNames_Interface): Use it.
* include/freetype/internal/tttypes.h: Add `TT_CharNext_Func'
typedef.
(TT_CMapTable): Use it.
* src/base/ftobjs.c (FT_Get_Next_Char): New function, implementing
high-level API.
* src/cff/cffdrivr.c (cff_get_next_char): New function.
(cff_driver_class): Add it.
* src/cid/cidriver.c (Cid_Get_Next_Char): New function.
(t1cid_driver_class): Add it.
* src/pcf/pcfdriver.c (PCF_Get_Next_Char): New function.
(pcf_driver_class): Add it.
* src/psnames/psmodule.c (PS_Next_Unicode): New function.
(psnames_interface): Add it.
* src/sfnt/ttcmap.c (code_to_next0, code_to_next2, code_to_next4,
code_to_next6, code_to_next_8_12, code_to_next_10): New auxiliary
functions.
(TT_CharMap_Load): Use them.
* src/truetype/ttdriver.c (Get_Next_Char): New function.
(tt_driver_class): Add it.
* src/type1/t1driver.c (Get_Next_Char): New function.
(t1_driver_class): Add it.
* src/winfnt/winfnt.c (FNT_Get_Next_Char): New function.
(winfnt_driver_class): Add it.
* src/pcf/pcfread.c (pcf_load_font): For now, report Unicode for
Unicode and Latin 1 encodings.
|
|
20abe742
|
2001-09-10T13:11:52
|
|
* src/sfnt/ttcmap.c (code_to_index2): Handle code values with
hi-byte == 0 correctly.
* builds/link-std.mk ($(PROJECT_LIBRARY)): Fix typo.
|
|
5dea4443
|
2001-08-13T11:44:29
|
|
Updating to OpenType 1.3.
* include/freetype/internal/tttypes.h (TT_CMap0, TT_CMap2, TT_CMap4,
TT_CMap6): Adding field `language'.
(TT_CMapTable): Removing field `language'.
Type of `length' field changed to FT_ULong.
Adding fields for cmaps format 8, 10, and 12.
(TT_CMapGroup): New auxiliary structure.
(TT_CMap8_12, TT_CMap10): New structures.
* include/freetype/tttables.h (TT_HoriHeader, TT_VertHeader):
Removed last element of `Reserved' array.
* include/freetype/ttnameid.h (TT_PLATFORM_CUSTOM, TT_MS_ID_UCS_4,
TT_NAME_ID_CID_FINDFONT_NAME): New macros.
* src/sfnt/ttcmap.c (TT_CharMap_Load): Updated loading of `language'
field to the new structures.
Fixed freeing of arrays in case of unsuccessful loads.
Added support for loading format 8, 10, and 12 cmaps.
(TT_CharMap_Free): Added support for freeing format 8, 10, and 12
cmaps.
(code_to_index4): Small improvement.
(code_to_index6): Ditto.
(code_to_index8_12, code_to_index10): New functions.
* src/sfnt/ttload.c (TT_Load_Metrics_Header): Updated to new
structure.
(TT_Load_CMap): Ditto.
* src/sfnt/sfobjs.c (tt_encodings): Add MS UCS4 table (before MS
Unicode).
* src/type1/t1driver.c (t1_get_name_index): Fix compiler warning.
|
|
415235df
|
2001-06-28T17:49:10
|
|
finishing function header formatting
updating copyrights
|
|
52005c30
|
2001-06-27T23:25:46
|
|
formatting
|
|
dee78134
|
2001-06-27T09:26:46
|
|
* include/freetype/ftconfig.h, src/*/*.c: changed the definition and
uses of the FT_CALLBACK_DEF macro in order to support 16-bit compilers
|
|
8eb0353f
|
2001-06-19T23:03:41
|
|
Formatting.
|
|
8edbcabc
|
2001-06-19T08:28:24
|
|
- updated doc for FT_New_Memory_Face
- removed lots of compiler warnings in lint-style
warning modes (/W4 with Visual C++)
|
|
1f7f0e87
|
2001-06-06T17:30:41
|
|
Complete redesign of error codes. Please check ftmoderr.h for more
details.
* include/freetype/internal/cfferrs.h,
include/freetype/internal/tterrors.h,
include/freetype/internal/t1errors.h: Removed. Replaced with files
local to the module. All extra error codes have been moved to
`fterrors.h'.
* src/sfnt/ttpost.h: Move error codes to `fterrors.h'.
* src/autohint/aherrors.h, src/cache/ftcerror.h, src/cff/cfferrs.h,
src/cid/ciderrs.h, src/pcf/pcferror.h, src/psaux/psauxerr.h,
src/psnames/psnamerr.h, src/raster/rasterrs.h, src/sfnt/sferrors.h,
src/smooth/ftsmerrs.h, src/truetype/tterrors.h,
src/type1/t1errors.h, src/winfonts/fnterrs.h: New files defining the
error names for the module it belongs to.
* include/freetype/ftmoderr.h: New file, defining the module error
offsets. Its structure is similar to `fterrors.h'.
* include/freetype/fterrors.h (FT_NOERRORDEF): New macro.
(FT_ERRORDEF): Redefined to use module error offsets.
All internal error codes are now public; unused error codes have
been removed, some are new.
* include/freetype/config/ftheader.h (FT_MODULE_ERRORS_H): New
macro.
* include/freetype/config/ftoption.h
(FT_CONFIG_OPTION_USE_MODULE_ERRORS): New macro.
All other source files have been updated to use the new error codes;
some already existing (internal) error codes local to a module have
been renamed to give them the same name as in the base module.
All make files have been updated to include the local error files.
* src/cid/cidtokens.h: Replaced with...
* src/cid/cidtoken.h: This file for 8+3 consistency.
* src/raster/ftraster.c: Use macros for header file names.
|
|
8d3a401f
|
2001-03-20T11:14:24
|
|
* builds/*/*-def.mk: changed the objects directory from "obj" to "objs"
* include/freetype/config/ftheader.h: removed obsolete macros like
FT_SOURCE_FILE, etc.. and added cache-specific macro definitions that
were previously defined in <freetype/ftcache.h>. Added comments to be
included in a new API Reference section.
* src/*/*: removed the use of FT_SOURCE_FILE, etc.. now, each component
needs to added its own directory to the include path at compile time.
Modified all "rules.mk" and "descrip.mms" accordingly..
|
|
914b289f
|
2001-03-10T17:07:42
|
|
* src/*/*.c: Added many casts to make code more 64bit-safe.
|
|
170c0d4c
|
2000-12-13T19:55:11
|
|
* include/freetype/config/ft2build.h,
include/freetype/internal/internal.h: fixed header inclusion macros
to use direct definitions. This is the only way to do these things
in a portable way :-( The rest of the code should follow shortly
though everything compiles now..
* builds/compiler/intelc.mk, builds/compiler/watcom.mk,
builds/win32/detect.mk: added support for the Intel C/C++ compiler,
as well as _preliminary_ (read: doesn't work !!) support for Watcom.
Also added a new setup target. Type "make setup list" for a list
of supported command-line compilers on Win32..
|
|
d5c1b27d
|
2000-12-12T22:28:12
|
|
* include/freetype/config/ft2build.h (FT2_ROOT, FT2_CONFIG_ROOT):
Removed. ANSI C doesn't (explicitly) allow macro expansion in
arguments using `##'.
(FT2_PUBLIC_FILE, FT2_CONFIG_FILE, FT2_INTERNAL_FILE): Use directory
names directly. Make them configurable. Use `##' to strip leading
and trailing spaces from arguments.
* builds/unix/ft2unix.h: Adapted.
* src/base/ftsystem.c (ft_alloc, ft_realloc, ft_free, ft_io_stream,
ft_close_stream): Use FT_CALLBACK_DEF.
* builds/unix/ftsystem.c: Use new header scheme.
(FT_Done_Memory): Use free() from FT_Memory structure.
* src/base/ftinit.c, src/base/ftmac.c: Header scheme fixes.
* include/freetype/config/ft2build.h (FT2_CONFIG_ROOT,
FT2_PUBLIC_FILE, FT2_CONFIG_FILE, FT2_INTERNAL_FILE,
FT_SOURCE_FILE): Use `##' operator to be really ANSI C compliant.
|
|
cc069beb
|
2000-12-08T16:17:16
|
|
cleanups
|
|
19ed8afe
|
2000-12-08T02:42:29
|
|
- updated all source files to adhere to the new inclusion scheme
- the CFF loader now loads the encodings and charset tables
though doesn't use them for now
|
|
b1aabf4c
|
2000-11-30T23:48:22
|
|
- added support for the free command-line Borland C++ compiler
in the "builds" directory
- modified a few files because BCC32 didn't like certain comparisons
(UInt compared with a UShort, apparently the UShort is promoted to
an Int)
- updated the INSTALL file to include IDE compilation, prevent against
BSD Make, and clarify the use of "make setup" (instead of "make")
for build configuration
|
|
dc72aff4
|
2000-11-04T08:33:38
|
|
Finishing David's latest changes (there were some errors in it).
|
|
76a5f623
|
2000-11-04T01:55:49
|
|
major reformatting of the sources:
FT_EXPORT_DEF => FT_EXPORT
FT_EXPORT_FUNC => FT_EXPORT_DEF
BASE_DEF => FT_BASE
BASE_FUNC => FT_BASE_DEF
LOCAL_DEF => FT_LOCAL
LOCAL_FUNC => FT_LOCAL_DEF
LOCAL_FUNC_X => FT_CALLBACK_DEF
LOCAL_DEF_X => FT_CALLBACK_TABLE
FT_CPLUSPLUS => FT_CALLBACK_TABLE_DEF
|
|
29a90e26
|
2000-08-03T00:03:08
|
|
Updating unix/ftconfig.in to recent config/ftconfig.h changes.
More C++ fixes: Introducing LOCAL_FUNC_X for local functions used in
function pointers (there are no local anonymous functions in C++) and
FT_CPLUSPLUS (instead of FT_EXPORT_VAR) to define linkage of structures
which contain function pointers.
|
|
7fa51b55
|
2000-07-08T19:51:42
|
|
Formatting.
Adding some trivial error checking.
Adding/Fixing tracing levels.
|
|
a90663f5
|
2000-07-08T00:41:13
|
|
vast clean-up of the sources in order to allow flat
directory compilation (by defining the FT_FLAT_COMPILE
macro at compile time..)
moved "freetype2/BUILD" to "freetype2/docs/BUILD"
|
|
bd5ae400
|
2000-07-05T04:32:02
|
|
Run g++ on the FreeType library. This should make the use of code in
C++ programs easier:
Renamed FT_WordXX to FT_UIntXX.
Changed a lot of void* to FT_Byte* if related to i/o streams -- FreeType
always accesses streams byte-wise, so this makes sense IMHO.
Added a lot of #ifdef __cplusplus to header files (and removed a few).
Other minor syntax fixes (mostly casts).
Replaced the variable `private' with `private_dict' -- `private' is
reserved in C++.
|
|
fbeb41d9
|
2000-07-02T00:27:53
|
|
Formatting.
Adding copyright notices.
Removing an unnecessary file (smooth.h).
|
|
a929ba9b
|
2000-06-25T06:47:11
|
|
applying formatting again
|
|
f0df85ba
|
2000-06-22T00:17:42
|
|
- MAJOR INTERNAL REDESIGN:
A lot of internal modifications have been performed lately on the
source in order to provide the following enhancements:
- more generic module support:
The FT_Module type is now defined to represent a handle to a given
module. The file <freetype/ftmodule.h> contains the FT_Module_Class
definition, as well as the module-loading public API
The FT_Driver type is still defined, and still represents a pointer
to a font driver. Note that FT_Add_Driver is replaced by FT_Add_Module,
FT_Get_Driver by FT_Get_Module, etc..
- support for generic glyph image types:
The FT_Renderer type is a pointer to a module used to perform various
operations on glyph image.
Each renderer is capable of handling images in a single format
(e.g. ft_glyph_format_outline). Its functions are used to:
- transform an glyph image
- render a glyph image into a bitmap
- return the control box (dimensions) of a given glyph image
The scan converters "ftraster.c" and "ftgrays.c" have been moved
to the new directory "src/renderer", and are used to provide two
default renderer modules.
One corresponds to the "standard" scan-converter, the other to the
"smooth" one.
The current renderer can be set through the new function
FT_Set_Renderer.
The old raster-related function FT_Set_Raster, FT_Get_Raster and
FT_Set_Raster_Mode have now disappeared, in favor of the new:
FT_Get_Renderer
FT_Set_Renderer
see the file <freetype/ftrender.h> for more details..
These changes were necessary to properly support different scalable
formats in the future, like bi-color glyphs, etc..
- glyph loader object:
A new internal object, called a 'glyph loader' has been introduced
in the base layer. It is used by all scalable format font drivers
to load glyphs and composites.
This object has been created to reduce the code size of each driver,
as each one of them basically re-implemented its functionality.
See <freetype/internal/ftobjs.h> and the FT_GlyphLoader type for
more information..
- FT_GlyphSlot had new fields:
In order to support extended features (see below), the FT_GlyphSlot
structure has a few new fields:
linearHoriAdvance: this field gives the linearly scaled (i.e.
scaled but unhinted) advance width for the glyph,
expressed as a 16.16 fixed pixel value. This
is useful to perform WYSIWYG text.
linearVertAdvance: this field gives the linearly scaled advance
height for the glyph (relevant in vertical glyph
layouts only). This is useful to perform
WYSIWYG text.
Note that the two above field replace the removed "metrics2" field
in the glyph slot.
advance: this field is a vector that gives the transformed
advance for the glyph. By default, it corresponds
to the advance width, unless FT_LOAD_VERTICAL_LAYOUT
was specified when calling FT_Load_Glyph or FT_Load_Char
bitmap_left: this field gives the distance in integer pixels from
the current pen position to the left-most pixel of
a glyph image WHEN IT IS A BITMAP. It is only valid
when the "format" field is set to
"ft_glyph_format_bitmap", for example, after calling
the new function FT_Render_Glyph.
bitmap_top: this field gives the distance in integer pixels from
the current pen position (located on the baseline) to
the top-most pixel of the glyph image WHEN IT IS A
BITMAP. Positive values correspond to upwards Y.
loader: this is a new private field for the glyph slot. Client
applications should not touch it..
- support for transforms and direct rendering in FT_Load_Glyph:
Most of the functionality found in <freetype/ftglyph.h> has been
moved to the core library. Hence, the following:
- a transform can be specified for a face through FT_Set_Transform.
this transform is applied by FT_Load_Glyph to scalable glyph images
(i.e. NOT TO BITMAPS) before the function returns, unless the
bit flag FT_LOAD_IGNORE_TRANSFORM was set in the load flags..
- once a glyph image has been loaded, it can be directly converted to
a bitmap by using the new FT_Render_Glyph function. Note that this
function takes the glyph image from the glyph slot, and converts
it to a bitmap whose properties are returned in "face.glyph.bitmap",
"face.glyph.bitmap_left" and "face.glyph.bitmap_top". The original
native image might be lost after the conversion.
- when using the new bit flag FT_LOAD_RENDER, the FT_Load_Glyph
and FT_Load_Char functions will call FT_Render_Glyph automatically
when needed.
|
|
9ca2af38
|
2000-06-21T03:03:28
|
|
A new formatting orgy.
Added some `#if 0' to completely disable the CID AFM stuff. In case this is
not correct please fix.
|
|
f9b8dec4
|
2000-06-16T19:34:52
|
|
major reformatting of the modules source code in order to get
rid of most of the basic types redefinitions (i.e. FT_Int instead
of "FT_Int", etc..)
The format-specific prefixs like "TT_", "T1_", "T2_" & 'CID_"
are now only used in relevant structures..
fixed Werner's fix to t2gload.c :-)
other small bug fixes
|
|
e35cac66
|
2000-06-11T03:46:57
|
|
A complete revision of FreeType 2's GNU makefiles (of the library):
Tons of unnecessary stuff have been removed; only the essential rules
have been retained.
The source files now depend on all header files in include/freetype,
include/freetype/config, and include/freetype/internal. This is not
optimal, I know, and I'll try to improve this, but it is better than
before (namely no dependencies on `internal').
FTDEBUG_SRC has been added (similar to FTSYS_SRC) -- I don't know
exactly whether this is really useful, but it doesn't harm.
There is now more documentation in the makefiles itself.
io-frames.html: Use of <th>, <code>, and <var> for better tagging.
Reactivating of FT_DEBUG_LEVEL_xxx macros.
Added a lot of #include directives to make `multi' builds possible -- note
that currently the modules cid, t1, and t1z have clashing structures and
functions which means that you can only use one of these three modules for a
multi build.
Added some missing function declarations to (local) header files.
Renamed some T1_Open_Face() to CID_Open_Face() in the cid module -- a lot
of other functions should be renamed also...
Replaced many FT_xxx stuff with T1_xxx in t1z driver -- this isn't finished
yet...
Fixed FT_Free() to allow a NULL pointer without an assertion (this has
always been a valid assumption in FreeType, at least in FT 1.x).
A lot of other, minor fixes (mostly documentation).
|
|
b770a4ab
|
2000-06-07T20:06:18
|
|
bug fix, suggested by Tor Lillqvist
|
|
61bd4b9d
|
2000-06-07T00:00:08
|
|
Added FT_FRAME_SKIP_xxx to skip fields.
More use of READ_Fields() in ttsbit.c
Other minor fixes.
|
|
920d41e0
|
2000-06-05T14:32:32
|
|
Removing trailing whitespace.
|
|
4e6dd858
|
2000-06-05T05:26:15
|
|
freetype.h: Adding ft_encoding_xxx values for some CJK encodings.
Fixing copyright notice on many files.
Changed some tracing levels.
A lot of formatting, fixing documentation etc. as usual.
|
|
b1677a87
|
2000-05-29T20:37:41
|
|
changed the SFNT driver slightly to add more robust
checking based on the "search_rang", etc.., fields of
the sfnt header..
This avoids problems (like certain Type 1 multiple masters
incorrectly recognized as trueType files)..
|
|
2e421319
|
2000-05-26T22:13:17
|
|
moved a lot of things from the TrueType driver to the SFNT
module (whose interface has changed, by the way)
This allows even more code re-use between TrueType and
OpenType formats..
|
|
e49ab25c
|
2000-05-16T23:44:38
|
|
formatting - removed trailing spaces
|
|
efce08d6
|
2000-05-11T18:23:52
|
|
major re-organisation of the FreeType 2 directory hierarchy
|
|
e98e4af7
|
2000-03-06T17:01:07
|
|
fixed a nasty bug that occured with CMAP format 4..
|
|
d2b1f357
|
1999-12-16T23:11:37
|
|
Initial revision
|