kmx git

Commit	Date	Message
766b822f	2009-09-12T23:15:17	[raster] Fix 5-levels grayscale output. This was broken since version 2.3.0. * src/raster/ftraster.c (count_table): Use pre-2.3.0 values (which were then computed dynamically). (Vertical_Gray_Sweep_Step): Updated. (ft_black_render): Initialize `worker->gray_lines' (problem found by valgrind). (FT_RASTER_OPTION_ANTI_ALIASING, DEBUG_RASTER): Dont' #undef, just comment out.
0d02317f	2009-07-09T09:21:46	[ftraster] Make it compile again with -D_STANDALONE_. * src/raster/ftraster.c [_STANDALONE_]: Define FT_CONFIG_STANDARD_LIBRARY_H. Include `string.h'. Don't include `rastpic.h'. Define FT_DEFINE_RASTER_FUNCS.
858abbed	2009-06-26T06:15:41	For warning messages, replace FT_ERROR with FT_TRACE0. FT_ERROR is now used only if a function produces a non-zero `error' value. Formatting, improving and harmonizing debug strings.
82622131	2009-06-18T15:48:21	Whitespace & documentation improvements.
72271140	2009-06-18T15:42:52	Fix B/W rasterization of subglyphs with different drop-out modes. Normally, the SCANMODE instruction (if present) to set the drop-out mode in a TrueType font is located in the `prep' table only and thus valid for all glyphs. However, there are fonts like `pala.ttf' which additionally contain this instruction in the hinting code of some glyphs (but not all). As a result it can happen that a composite glyph needs multiple drop-out modes for its subglyphs since the rendering state gets reset for each subglyph. FreeType collects the hinted outlines from all subglyphs, then it sends the data to the rasterizer. It also sends the drop-out mode -- after hinting has been applied -- and here is the error: It sends the drop-out mode of the last subglyph only; drop-out modes of all other subglyphs are lost. This patch fixes the problem; it adds a second, alternative mechanism to pass the drop-out mode: For each contour, the rasterizer now checks the first `tags' array element. If bit 2 is set, bits 5-7 contain the contour's drop-out mode, overriding the global drop-out mode. * include/freetype/ftimage.h (FT_CURVE_TAG_HAS_SCANMODE): New macro. * src/truetype/ttgload.c (TT_Hint_Glyph): Store drop-out mode in `tags[0]'. * src/raster/ftraster.c (Flow_Up, Overshoot_Top, Overshoot_Bottom): Use bits 3-5 instead of 0-2. (New_Profile): Set the drop-out mode in the profile's `flags' field. (Decompose_Curve): Check `tags[0]' and set `dropOutControl' if necessary. (Vertical_Sweep_Drop, Horizontal_Sweep_Drop, Horizontal_Gray_Sweep_Drop, Draw_Sweep): Use the profile's drop-out mode.
42206ad8	2009-06-16T15:14:21	Improve scan conversion rules 4 and 6. Two new constraints are introduced to better identify a `stub' -- a concept which is only vaguely described in the OpenType specification. The old code was too rigorous and suppressed more pixel than it should. . The intersection of the two profiles with the scanline is less than a half pixel. Code related to this was already present in the sources but has been commented out. . The endpoint of the original contour forming a profile has a distance (`overshoot') less than half a pixel to the scanline. Note that the two additional conditions fix almost all differences to the Windows rasterizer, but some problematic cases remain. * src/raster/ftraster.c (Overshoot_Top, Overshoot_Bottom): New macros for the `flags' field in the `TProfile' structure. (IS_BOTTOM_OVERSHOOT, IS_TOP_OVERSHOOT): New macros. (New_Profile, End_Profile): Pass overshoot flag as an argument and set it accordingly. Update callers. (Vertical_Sweep_Drop, Horizontal_Sweep_Drop): Implement the two new constraints.
0409ef32	2009-06-11T17:32:31	Increase precision for B/W rasterizer. * src/raster/ftraster.c (Set_High_Precision): Add two more bits to the precision. This corrects rendering of some small glyphs, for example, glyph `xi' in verdana.ttf at 13 ppem. Testing with ftbench on my GNU/Linux box I don't see a performance degradation.
2f2b780e	2009-06-07T08:29:30	Simplify math. Suggested by Alexei Podtelezhnikov <apodtele@gmail.com>. * src/raster/ftraster.c (Vertical_Sweep_Drop, Horizontal_Sweep_Drop, Horizontal_Gray_Sweep_Drop): Do it.
90c699af	2009-06-05T10:37:15	Preparation for fixing scan conversion rules 4 and 6. * src/raster/ftraster.c (TFlow): Replace enumeration with... (Flow_Up): This macro. (TProfile): Replace `flow' member with `flags' bit field. Update all affected code.
cbdba615	2009-06-03T08:53:47	Typo, formatting.
19fbc576	2009-05-22T09:20:25	Improve b/w rasterizer. Problem reported by Krzysztof Kotlenga <pocek@users.sf.net>. * src/raster/raster.c (Vertical_Sweep_Drop, Horizontal_Sweep_Drop, Horizontal_Gray_Sweep_Drop): For smart drop-out mode, if intersections are equally distant relative to next pixel center, select the left pixel, not the right one.
05609509	2009-04-05T18:16:13	Position Independent Code (PIC) support in raster renderer. * src/raster/ftrend1.h declare ft_raster1_renderer_class and ft_raster5_renderer_class using macros from ftrender.h, when FT_CONFIG_OPTION_PIC is defined create and destroy functions will be declared. * src/smooth/ftrend1.c when FT_CONFIG_OPTION_PIC is defined ft_raster1_renderer_class and ft_raster5_renderer_class structs will have functions to init or create and destroy them instead of being allocated in the global scope. Macros will be used from rastpic.h in order to access ft_standard_raster from the pic_container (allocated in ftraster.c). In ft_raster1_render when PIC is enabled, the last letter of module_name is used to verfy the renderer class rather than the class pointer. * src/raster/ftraster.c when FT_CONFIG_OPTION_PIC is defined ft_standard_raster struct will have function to init it instead of being allocated in the global scope. New Files: * src/raster/rastpic.h declare struct to hold PIC globals for raster renderer and macros to access them. * src/raster/rastpic.c implement functions to allocate, destroy and initialize PIC globals for raster renderer. * src/raster/raster.c add new file to build: rastpic.c. * src/raster/jamfile add new files to FT2_MULTI build: rastpic.c.
b66efefd	2009-03-12T08:07:49	Fix some FreeType Coverity issues as reported for Ghostscript. * src/base/ftobjs.c (FT_New_Face, FT_New_Memory_Face): Initialize `args.stream' (#3874, #3875). (open_face_PS_from_sfnt_stream): Improve error management (#3786). * src/base/ftmm.c (ft_face_get_mm_service): Fix check of `aservice' (#3870). * src/base/ftstroke.c (ft_stroke_border_get_counts): Remove dead code (#3790). * src/base/ftrfork.c (raccess_guess_apple_generic): Check error value of `FT_Stream_Skip' (#3784). * src/type1/t1gload.c (T1_Load_Glyph): Check `size' before accessing it (#3872) * src/pcf/pcfdrivr.c (PCF_Glyph_Load): Check `face' before accessing it (#3871). * src/pcf/pcfread.c (pcf_get_metrics): Handle return value of `pcf_get_metric' (#3789, #3782). (pcf_get_properties): Use FT_STREAM_SKIP (#3783). * src/cache/ftcmanag.c (FTC_Manager_RegisterCache): Fix check of `acache' (#3797) * src/cff/cffdrivr.c (cff_ps_get_font_info): Fix check of `cff' (#3796). * src/cff/cffgload.c (cff_decoder_prepare): Check `size' (#3795). * src/cff/cffload.c (cff_index_get_pointers): Add comment (#3794). * src/bdf/bdflib.c (_bdf_add_property): Check `fp->value.atom' (#3793). (_bdf_parse_start): Add comment (#3792). * src/raster/ftraster.c (Finalize_Profile_Table): Check `ras.fProfile' (#3791). * src/sfnt/ttsbit.c (Load_SBit_Image): Use FT_STREAM_SKIP (#3785). * src/gzip/ftgzip.c (ft_gzip_get_uncompressed_size): Properly ignore seek error (#3781).
f47acf2b	2009-01-12T20:11:14	Avoid compiler warnings. * /: s/do ; while ( 0 )/do { } while ( 0 )/. Reported by Sean McBride <sean@rogue-research.com>.
174b8de3	2008-10-12T11:47:29	* src/sfnt/sfobjs.c (sfnt_load_face): Fix computation of `underline_position'. * docs/CHANGES: Updated. Formatting, minor editing.
71b8f3f2	2008-07-04T07:22:06	* src/raster/ftraster.c (Draw_Sweep): If span is smaller than one pixel, only check for dropouts if neither start nor end point lies on a pixel center. This fixes Savannah bug #23762.
a741c6f2	2008-06-27T06:58:48	* src/raster/ftraster.c (Vertical_Sweep_Drop, Horizontal_Sweep_Drop, Horizontal_Gray_Sweep_Drop): Test for intersections which degenerate to a single point can be ignored; this has been confirmed by Greg Hitchcock from Microsoft. (This was commented out code.)
ce8853af	2008-06-24T11:19:03	* src/truetype/ttinterp. (Ins_SCANTYPE): Don't check rendering mode. * src/raster/ftraster.c (Render_Glyph, Render_Gray_Glyph, Draw_Sweep): No-dropout mode is value 2, not value 0. (Draw_Sweep): Really skip dropout handling for no-dropout mode.
5df5dbb7	2008-06-22T13:40:08	Enable access to the various dropout rules of the B&W rasterizer. Pass dropout rules from the TT bytecode interpreter to the rasterizer; temporarily this is enabled only if `USE_SCAN_CONVERSION_RULES' is defined. * include/freetype/ftimage.h (FT_OUTLINE_SMART_DROPOUTS, FT_OUTLINE_EXCLUDE_STUBS): New flags for for FT_Outline. * src/raster/ftraster.c (Vertical_Sweep_Drop, Horizontal_Sweep_Drop, Horizontal_Gray_Sweep_Drop): Use same mode numbers as given in the OpenType specification. Fix mode 4 computation. (Render_Glyph, Render_Gray_Glyph): Handle new outline flags. * src/truetype/ttgload.c (TT_Load_Glyph) [USE_SCAN_CONVERSION_RULES]: Convert scan conversion mode to FT_OUTLINE_XXX flags. * src/truetype/ttinterp.c (Ins_SCANCTRL): Enable ppem check.
c9381318	2008-05-25T12:19:34	* src/raster/ftraster.c (fc_black_render): Return 0 when we are trying to render into a zero-width/height bitmap, not an error code.
1ddd1b76	2008-01-16T06:58:54	* src/raster/ftraster.c (ft_black_render): Check `outline' before using it. Reported by Allan Yang.
eca1f279	2008-01-12T07:46:09	* src/raster/ftraster.c (FT_CONFIG_OPTION_5_GRAY_LEVELS): Remove. * src/raster/ftraster.c (ft_black_init) [FT_RASTER_OPTION_ANTI_ALIASING]: Fix compilation.
39c91ad4	2007-07-28T05:40:40	* src/raster/ftraster.c (count_table): Make it conditional. * src/base/ftobjs.c (FT_New_Library): Check FT_RENDER_POOL_SIZE with a preprocessor statement.
6e87ed9f	2007-01-26T22:18:56	Spelling fixes from Alexei.
4ea0a7f0	2007-01-05T09:03:31	formatting, minor doc fixes, copyright years
38d1002b	2007-01-04T18:50:12	* src/raster/ftraster.c: removing dynamically generated "count_table", and replace it with a constant array of bytes
8a2c7f8f	2007-01-04T18:33:12	* src/raster/ftraster.c, src/smooth/ftgrays.c: small optimization, the rasterizers now uses the render pool to store their state during scanline convertion. this saves about 6 KB of heap space for each FT_Library instance
8ae1dceb	2005-05-20T06:22:20	* include/freetype/ftimage.h (FT_Raster_Params), include/freetype/ftoutln.h (FT_Outline_Translate, FT_Outline_Transform), src/base/ftoutln.c (FT_Outline_Translate, FT_Outline_Transform): Decorate parameters with `const' where appropriate. Update all callers. * src/raster/ftraster.c (ft_black_reset), src/smooth/ftgrays.c (gray_raster_reset): Remove `const' from `pool_base' argument.
f9fccbee	2005-05-19T07:20:24	* src/raster/ftmisc.h: New file. Only needed if ftraster.c is compiled as stand-alone. * src/raster/ftraster.c: Add comment how to compile as stand-alone. s/FT_CONFIG_OPTION_STATIC_RASTER/FT_STATIC_RASTER/. s/TT_STATIC_RASTER/FT_STATIC_RASTER/. [_STANDALONE_]: Include ftimage.h and ftmisc.h. (FT_TRACE1, FT_TRACE6, ft_memset, FT_MEM_ZERO): Define conditionally. (Render_Glyph, Render_Gray_Glyph): Return Raster_Err_None (or Raster_Err_Unsupported). (ft_black_new) [_STANDALONE_]: Fix type of `the_raster'. (ft_black_init, ft_black_reset, ft_black_set_mode, ft_black_render): Use `ras', not `raster'. (ft_black_done): Use FT_UNUSED_RASTER. (Horizontal_Sweep_Init, Horizontal_Sweep_Step, Horizontal_Gray_Sweep_Span): Use FT_UNUSED_RASTER. * docs/CHANGES: Updated.
ce235eaf	2005-05-17T20:35:23	* builds/win32/visualc/freetype.vcproj: Updated. Exclude debug info for `Release' versions to reduce library size. * src/base/ftobjs.c (FT_Open_Face): Make it work as documented, this is, ignore `aface' completely if face_index < 0. Reported by David Osborn <spam@habitualhiatus.com>. * include/freetype/ftimage.h (FT_Outline_MoveToFunc, FT_Outline_LineTo_Func, FT_Outline_ConicToFunc, FT_Outline_CubicToFunc), src/smooth/ftgrays.c (gray_render_conic, gray_render_cubic, gray_move_to, gray_line_to, gray_conic_to, gray_cubic_to, gray_render_span, gray_sweep): Decorate parameters with `const' where appropriate.
fa420250	2005-05-11T20:04:35	* include/freetype/ftimage.h (FT_Raster_RenderFunc), include/freetype/ftrender.h (FT_Glyph_TransformFunc, FT_Renderer_Render_Func, FT_Renderer_TransformFunc), src/base/ftglyph.c (ft_outline_glyph_transform), src/raster/ftrend1.c (ft_raster1_transform, ft_raster1_render), src/smooth/ftgrays.c (FT_Outline_Decompose, gray_raster_render), src/smooth/ftsmooth.c (ft_smooth_transform, ft_smooth_render_generic, ft_smooth_render, ft_smooth_render_lcd, ft_smooth_render_lcd_v): Decorate parameters with `const' where appropriate. * src/raster/ftraster.c (RASTER_RENDER_POOL): Removed. Obsolete. (ft_black_render): Decorate parameters with `const' where appropriate. * src/sfnt/ttcmap.c (tt_cmap4_set_range): Fix typo (FT_PEEK_SHORT -> FT_PEEK_USHORT) which caused crashes. Reported by Ismail Donmez <ismail@kde.org.tr>.
c01c9042	2005-04-14T16:03:15	* include/freetype/freetype.h (FT_Vector_Transform), include/freetype/ftimage.h (FT_Raster_Params), include/freetype/ftoutln.h, src/base/ftoutln.c (FT_Outline_Get_CBox, FT_Outline_Copy, FT_Outline_Transform, FT_Vector_Transform, FT_Outline_Get_Bitmap), src/raster/ftraster.c (ft_black_render), src/smooth/ftgrays.c (gray_raster_render): Decorate parameters with `const' where appropriate. * src/sfnt/ttsbit0.c (tt_sbit_decoder_load_image): Fix arguments to call of tt_sbit_decoder_load_bitmap.
e5bcbf95	2005-04-01T23:57:31	Add comment about hard-coded dropout mode.
fefd8742	2004-06-12T13:21:20	* docs/CHANGES: Updated. Minor clean-ups.
8530a228	2004-06-09T20:18:35	* include/freetype/freetype.h (FT_Glyph_Metrics, FT_GlyphSlotRec), src/autofit/afloader.c, src/autohint/ahhint.c: moved the definition of 'lsb_delta' and 'rsb_delta' from FT_GlyphMetrics to FT_GlyphSlotRec. The old location did BREAK BINARY COMPATIBILITY of the library !! * src/sfnt/sfobjs.c: removing compiler warning
73861976	2003-06-05T04:31:05	* include/freetype/internal/ftdriver.h, include/freetype/internal/ftobjs.h, include/freetype/internal/psaux.h, src/cid/cidgload.c, src/psaux/psobjs.c, src/psaux/t1decode.c, src/psaux/psobjs.h, src/pshinter/pshrec.c, src/pshinter/pshalgo.c, src/psnames/psmodule.c, src/raster/ftraster.c, src/sfnt/sfobjs.c, src/smooth/ftgrays.c, src/smooth/ftsmooth.c, src/truetype/ttobjs.c, src/truetype/ttdriver.c, src/truetype/ttgload.c, src/type1/t1afm.c, src/type1/t1gload.c, src/type1/t1gload.h, src/type1/t1load.c, src/type1/t1objs.c, src/type42/t42parse.c, src/type42/t42parse.h: Many casts and slight argument type changes to make it work with a 16bit compiler.
51daa4fe	2003-05-18T22:40:11	* src/raster/ftraster.c (Insert_Y_Turn): Fix overflow test. * include/freetype/config/ftoption.h [FT_CONFIG_OPTION_MAC_FONTS]: New macro. * src/base/ftobjs.c: Use it to control mac font support on non-mac platforms. Implement partial support of Mac fonts on non-Mac platforms. * src/base/ftobjs.c (memory_stream_close, new_memory_stream, open_face_from_buffer, Mac_Read_POST_Resource, Mac_Read_sfnt_Resource, IsMacResource, IsMacBinary, load_mac_face) [!FT_MACINTOSH]: New functions. (FT_Open_Face) [!FT_MACINTOSH]: Use load_mac_face. * src/base/ftobjs.c (FT_Load_Glyph): Scale linear advance width only if FT_FACE_FLAG_SCALABLE is set (otherwise we have a division by zero since FNT and friends don't define `face->units_per_EM').
68e9f927	2002-09-27T11:09:23	* src/sfnt/ttpost.c (load_post_names, tt_face_free_ps_names, tt_face_get_ps_name): Replace switch statement with if clauses to make it more portable. * src/cff/cffobjs.c (cff_face_init): Ditto. * include/freetype/ftmodule.h (FT_Module_Class): Use `FT_Long' for `module_size'. * include/freetype/ftrender.h (FT_Glyph_Class_): Use `FT_Long' for `glyph_size'. * src/base/ftobjs.c (FT_Render_Glyph): Change second parameter to `FT_Render_Mode'. (FT_Render_Glyph_Internal): Change third parameter to `FT_Render_Mode'. * src/base/ftglyph.c (FT_Glyph_To_Bitmap): Change second parameter to `FT_Render_Mode'. * src/raster/ftrend1.c (ft_raster1_render): Change third parameter to `FT_Render_Mode'. * src/smooth/ftsmooth.c (ft_smooth_render, ft_smooth_render_lcd, ft_smooth_render_lcd_v): Ditto. (ft_smooth_render_generic): Change third and fifth parameter to `FT_Render_Mode'. * include/freetype/freetype.h, include/freetype/internal/ftobjs.h, include/freetype/ftglyph.h: Updated. * src/cff/cffdrivr.c (Load_Glyph), src/pcf/pcfdriver.c (PCF_Glyph_Load), src/pfr/pfrobjs.c (pfr_slot_load), src/winfonts/winfnt.c (FNT_Load_Glyph), src/t42/t42objs.c (T42_GlyphSlot_Load), src/bdf/bdfdrivr.c (BDF_Glyph_Load): Change fourth parameter to `FT_Int32'. * src/pfr/pfrobjs.c (pfr_face_init): Add two missing parameters and declare them as unused. * src/cid/cidparse.h (CID_Parser): Use FT_Long for `postscript_len'. * src/psnames/psnames.h (PS_Unicode_Value_Func): Change return value to FT_UInt32. * src/psnames/psmodule.c (ps_unicode_value, ps_build_unicode_table): Updated accordingly. * src/cff/cffdrivr.c (Get_Kerning): Use FT_Long for `middle'. (cff_get_glyph_name): Use cast for result of ft_strlen. * src/cff/cffparse.c (cff_parse_real): User cast for assigning `exp'. * src/cff/cffload.c (cff_index_get_pointers): Use FT_ULong for some local variables. (cff_charset_load, cff_encoding_load): Use casts to FT_UInt for some switch statements. (cff_font_load): Use cast in call to CFF_Load_FD_Select. * src/cff/cffobjs.c (cff_size_init): Use more casts. (cff_face_init): Use FT_Int32 for `flags'. * src/cff/cffgload.c (cff_operator_seac): Use cast for assigning `adx' and `ady'. (cff_decoder_parse_charstrings): Use FT_ULong for third parameter. Use more casts. * src/cff/cffcmap.c (cff_cmap_unicode_init): Use cast for `count'. * src/cid/cidload.c (cid_read_subrs): Use FT_ULong for `len'. * src/cid/cidgload.c (cid_load_glyph): Add missing cast for `cid_get_offset'. * src/psaux/t1decode.c (t1_decoder_parse_charstrings) <18>: Use cast for `num_points'. (t1_decoder_init): Use cast for assigning `decoder->num_glyphs'. * src/base/ftdebug.c (ft_debug_init): Use FT_Int. * include/freetype/internal/ftdriver.h (FT_Slot_LoadFunc): Use `FT_Int32' for fourth parameter. * src/base/ftobjs.c (open_face): Use cast for calling clazz->init_face. * src/raster/ftraster.c (Set_High_Precision): Use `1' instead of `1L'. (Finalize_Profile_Table, Line_Up, ft_black_init): Use casts. * src/raster/ftrend1.c (ft_raster1_render): Ditto. * src/sfnt/sfnt_dir_check: Compare `magic' with unsigned long constant. * builds/amiga/include/freetype/config/ftmodule.h: Updated.
b08fe2dc	2002-08-27T20:20:29	* massive re-formatting changes to many, many source files. I don't want to list them all here. The operations performed were all logical transformations of the sources: - trying to convert all enums and constants to CAPITALIZED_STYLE, with #define definitions like #define my_old_constants MY_NEW_CONSTANT - big, big update of the documentation comments * include/freetype/freetype.h, src/base/ftobjs.c, src/smooth/ftsmooth.c, include/freetype/ftimage.h: adding support for LCD-optimized rendering though the new constants/enums: FT_RENDER_MODE_LCD, FT_RENDER_MODE_LCD_V FT_PIXEL_MODE_LCD, FT_PIXEL_MODE_LCD_V this is still work in progress, don't expect everything to work correctly though most of the features have been implemented. * adding new FT_LOAD_XXX flags, used to specify both hinting and rendering targets: FT_LOAD_TARGET_NORMAL :: anti-aliased hinting & rendering FT_LOAD_TARGET_MONO :: monochrome bitmaps FT_LOAD_TARGET_LCD :: horizontal RGB/BGR decimated hinting & rendering FT_LOAD_TARGET_LCD_V :: vertical RGB/BGR decimated hinting & rendering note that FT_LOAD_TARGET_NORMAL is 0, which means that the default behaviour of the font engine is _unchanged_.
3c403e4c	2002-08-06T21:47:40	Some formatting. * src/cff/cffcmap.c: Remove compiler warnings. * src/cache/ftccache.c, src/cache/ftccache.i, src/pfr/pfrload.c, src/pfr/pfrgload.c: s/index/idx/. * src/cff/cffload.c: s/select/fdselect/. * src/raster/ftraster.c: s/wait/waiting/.
b3d5e9cf	2002-07-28T05:05:24	s/ft_memset/FT_MEM_SET/. s/FT_MEM_SET/FT_MEM_ZERO/ where appropriate.
9ca7a157	2002-04-30T14:26:49	* src/base/ftmac.c (p2c_str): Removed. (file_spec_from_path) [TARGET_API_MAC_CARBON]: Added support for OS X. (is_dfont) [TARGET_API_MAC_CARBON]: Define only for OS X. Handle `nameLen' <= 6 also. (parse_fond): Remove unused variable `name_table'. Use functionality of old p2c_str directly. Add safety checks. (read_lwfn): Initialize `size_p'. Check for size_p == NULL. (new_memory_stream, open_face_from_buffer): Updated to FreeType 2.1. (FT_New_Face_From_LWFN): Remove unused variable `memory'. Remove some dead code. (FT_New_Face_From_SFNT): Remove unused variable `stream'. (FT_New_Face_From_dfont) [TARGET_API_MAC_CARBON]: Define only for OS X. (FT_New_Face_From_FOND): Remove unused variable `error'. (ResourceForkSize): New function. (FT_New_Face): Use it. Handle empty resource forks. Conditionalize some code for OS X. Add code to call normal loader as a fallback. Some more variable renames to avoid troubles on the Mac. * src/raster/ftraster.c: s/Unknown\|Ascending\|Descending\|Flat/\1_State/. * src/smooth/ftgrays.c: s/TScan/TCoord/. Other changes for the Mac. * include/freetype/config/ftconfig.h: Define FT_MACINTOSH for Mac platforms. * src/base/ftobjs.c: s/macintosh/FT_MACINTOSH/. * src/raster/ftrend1.c (ft_raster1_render): Make `pitch' always an even number.
94ffae52	2002-04-14T00:54:32	* src/cff/cffgload.c (CFF_Parse_CharStrings): s/rand/Rand/ to avoid compiler warning. formatting/fixing ChangeLog
d15bc0d1	2002-04-12T09:31:48	* README.UNX: updated the Unix-specific quick-compilation guide to warn about the GNU Make requirement at compile time.. * include/freetype/config/ftstdlib.h, include/freetype/config/ftconfig.h, include/freetype/config/ftheader.h, include/freetype/internal/ftmemory.h, include/freetype/internal/ftobjs.h, src/autohint/ahoptim.c, src/base/ftdbgmem.c, src/base/ftdebug.c, src/base/ftmac.c, src/base/ftobjs.c, src/base/ftsystem.c, src/cache/ftcimage.c, src/cache/ftcsbits.c, src/cff/cffdriver.c, src/cff/cffload.c, src/cff/cffobjs.c, src/cid/cidload.c, src/cid/cidparse.c, src/cid/cidriver.c, src/pcf/pcfdriver.c, src/pcf/pcfread.c, src/psaux/t1cmap.c, src/psaux/t1decode.c, src/pshinter/pshalgo1.c, src/pshinter/pshalgo2.c, src/pshinter/pshrec.c, src/psnames/psmodule.c, src/raster/ftraster.c, src/sfnt/sfdriver.c, src/sfnt/ttload.c, src/sfnt/ttpost.c, src/smooth/ftgrays.c, src/type1/t1afm.c, src/type1/t1driver.c, src/type1/t1gload.c, src/type1/t1load.c, src/type1/t1objs.c, src/type1/t1parse.c: added the new configuration file "ftstdlib.h" used to define aliases for all ISO C library functions used by the engine (e.g. strlen, qsort, setjmp, etc...) this eases the porting of FreeType 2 to exotic environments like XFree86 modules/extensions.. also removed many #include <string.h>, #include <stdlib.h>, etc... from the engine's sources where they're not needed..
b7b163cb	2002-03-31T18:48:24	* src/sfnt/ttcmap.c: 16bit fixes (0xFFFF -> 0xFFFFU). * src/sfnt/ttcmap0.c: 16bit fixes. (TT_Build_CMaps): Simplify debug messages. (tt_cmap12_char_next): Fix offset. * src/sfnt/ttload.c (TT_Load_Names, TT_Load_CMap): Fix debug messages. (TT_Load_OS2): 16bit fix.
e459d742	2002-03-22T13:52:37	* include/freetype/internal/ftmemory.h, and a lot of other files !!: changed the names of memory macros. Examples: MEM_Set => FT_MEM_SET MEM_Copy => FT_MEM_COPY MEM_Move => FT_MEM_MOVE ALLOC => FT_ALLOC FREE => FT_FREE REALLOC = >FT_REALLOC FT_NEW was introduced to allocate a new object from a _typed_ pointer.. note that ALLOC_ARRAY and REALLOC_ARRAY have been replaced by FT_NEW_ARRAY and FT_RENEW_ARRAY which take _typed_ pointer arguments. This results in _lots_ of sources being changed, but makes the code more generic and less error-prone..
bc82f1bb	2002-03-01T02:26:22	* include/freetype/ftconfig.h: changed FT_LOCAL xxxx to FT_LOCAL( xxxx ) everywhere in the source. Sames goes for FT_LOCAL_DEF xxxx translated into FT_LOCAL_DEF( xxxxx )
c3b21608	2001-12-05T01:22:05	Formatting. Cleaning up of ChangeLog. * docs/license.txt: s/X Windows/X Window System/. * src/raster/ftraster.c: Fix definition condition of MEM_Set(). * src/smooth/ftgrays.c (M_Y): Change value to 192. * src/base/ftdbgmem.c (ft_mem_table_destroy): Fix printf() parameter. Remove unused variable. * src/cache/ftcimage.c (ftc_image_node_init, ftc_image_node_compare): Remove unused variables. * src/cache/ftcsbits.c (ftc_sbit_node_weight): Remove unused variable. * src/raster/ftraster.c (MEM_Set): Move definition down to avoid compiler warning. * src/autohint/ahhint.c (ah_hinter_hint_edges): Use UNUSED() to avoid compiler warnings. * src/pcf/pcfread.c (tableNames): Use `const'. (pcf_read_TOC): Change counter name to avoid compiler warning. Use `const'. * src/pshinter/pshrec.c (ps_hints_close): Remove redundant declaration. * src/pshinter/pshalgo1.c (psh1_hint_table_init): Rename variables to avoid shadowing. * src/pshinter/pshalgo2.c (psh2_hint_table_activate_mask): Ditto. * src/type1/t1objs.h: Remove double declarations of `T1_Size_Init()' and `T1_Size_Done()'.
5a1de37e	2001-10-24T07:32:55	replaced liberal uses of "memset" by the "MEM_Set" macro call (some platforms don't provide this ANSI function !!) some changes to "ftsystem.c" implementations in order to use the new memory debugger on Unix, VMS and Amiga too !!
ea5a981c	2001-10-17T14:29:51	minimal optimisation submitted by Graham Asher
415235df	2001-06-28T17:49:10	finishing function header formatting updating copyrights
52005c30	2001-06-27T23:25:46	formatting
8eb0353f	2001-06-19T23:03:41	Formatting.
8edbcabc	2001-06-19T08:28:24	- updated doc for FT_New_Memory_Face - removed lots of compiler warnings in lint-style warning modes (/W4 with Visual C++)
1f7f0e87	2001-06-06T17:30:41	Complete redesign of error codes. Please check ftmoderr.h for more details. * include/freetype/internal/cfferrs.h, include/freetype/internal/tterrors.h, include/freetype/internal/t1errors.h: Removed. Replaced with files local to the module. All extra error codes have been moved to `fterrors.h'. * src/sfnt/ttpost.h: Move error codes to `fterrors.h'. * src/autohint/aherrors.h, src/cache/ftcerror.h, src/cff/cfferrs.h, src/cid/ciderrs.h, src/pcf/pcferror.h, src/psaux/psauxerr.h, src/psnames/psnamerr.h, src/raster/rasterrs.h, src/sfnt/sferrors.h, src/smooth/ftsmerrs.h, src/truetype/tterrors.h, src/type1/t1errors.h, src/winfonts/fnterrs.h: New files defining the error names for the module it belongs to. * include/freetype/ftmoderr.h: New file, defining the module error offsets. Its structure is similar to `fterrors.h'. * include/freetype/fterrors.h (FT_NOERRORDEF): New macro. (FT_ERRORDEF): Redefined to use module error offsets. All internal error codes are now public; unused error codes have been removed, some are new. * include/freetype/config/ftheader.h (FT_MODULE_ERRORS_H): New macro. * include/freetype/config/ftoption.h (FT_CONFIG_OPTION_USE_MODULE_ERRORS): New macro. All other source files have been updated to use the new error codes; some already existing (internal) error codes local to a module have been renamed to give them the same name as in the base module. All make files have been updated to include the local error files. * src/cid/cidtokens.h: Replaced with... * src/cid/cidtoken.h: This file for 8+3 consistency. * src/raster/ftraster.c: Use macros for header file names.
caf72cd6	2001-04-25T18:11:16	* src/base/ftbbox.c (BBox_Cubic_Check): rewrote function to use direct computations with 16.16 values instead of sub-divisions. It is now slower, but proves a point :-) * src/raster/ftraster.c, src/smooth/ftgrays.c, src/base/ftbbox.c : fixed the bezier stack depths.. * src/base/ftcalc.c (FT_MulFix): minor rounding fix * builds/beos : added BeOS-specific files to the old build system (no changes were necessary to support BeOS in the Jamfile though)
8d3a401f	2001-03-20T11:14:24	* builds//-def.mk: changed the objects directory from "obj" to "objs" * include/freetype/config/ftheader.h: removed obsolete macros like FT_SOURCE_FILE, etc.. and added cache-specific macro definitions that were previously defined in <freetype/ftcache.h>. Added comments to be included in a new API Reference section. * src//: removed the use of FT_SOURCE_FILE, etc.. now, each component needs to added its own directory to the include path at compile time. Modified all "rules.mk" and "descrip.mms" accordingly..
914b289f	2001-03-10T17:07:42	* src//.c: Added many casts to make code more 64bit-safe.
1eb9a43a	2000-12-14T21:24:27	fixed small bug (no need to test target pixmap in direct rendering mode)
170c0d4c	2000-12-13T19:55:11	* include/freetype/config/ft2build.h, include/freetype/internal/internal.h: fixed header inclusion macros to use direct definitions. This is the only way to do these things in a portable way :-( The rest of the code should follow shortly though everything compiles now.. * builds/compiler/intelc.mk, builds/compiler/watcom.mk, builds/win32/detect.mk: added support for the Intel C/C++ compiler, as well as _preliminary_ (read: doesn't work !!) support for Watcom. Also added a new setup target. Type "make setup list" for a list of supported command-line compilers on Win32..
d5c1b27d	2000-12-12T22:28:12	* include/freetype/config/ft2build.h (FT2_ROOT, FT2_CONFIG_ROOT): Removed. ANSI C doesn't (explicitly) allow macro expansion in arguments using `##'. (FT2_PUBLIC_FILE, FT2_CONFIG_FILE, FT2_INTERNAL_FILE): Use directory names directly. Make them configurable. Use `##' to strip leading and trailing spaces from arguments. * builds/unix/ft2unix.h: Adapted. * src/base/ftsystem.c (ft_alloc, ft_realloc, ft_free, ft_io_stream, ft_close_stream): Use FT_CALLBACK_DEF. * builds/unix/ftsystem.c: Use new header scheme. (FT_Done_Memory): Use free() from FT_Memory structure. * src/base/ftinit.c, src/base/ftmac.c: Header scheme fixes. * include/freetype/config/ft2build.h (FT2_CONFIG_ROOT, FT2_PUBLIC_FILE, FT2_CONFIG_FILE, FT2_INTERNAL_FILE, FT_SOURCE_FILE): Use `##' operator to be really ANSI C compliant.
19ed8afe	2000-12-08T02:42:29	- updated all source files to adhere to the new inclusion scheme - the CFF loader now loads the encodings and charset tables though doesn't use them for now
76a5f623	2000-11-04T01:55:49	major reformatting of the sources: FT_EXPORT_DEF => FT_EXPORT FT_EXPORT_FUNC => FT_EXPORT_DEF BASE_DEF => FT_BASE BASE_FUNC => FT_BASE_DEF LOCAL_DEF => FT_LOCAL LOCAL_FUNC => FT_LOCAL_DEF LOCAL_FUNC_X => FT_CALLBACK_DEF LOCAL_DEF_X => FT_CALLBACK_TABLE FT_CPLUSPLUS => FT_CALLBACK_TABLE_DEF
a4e2894e	2000-10-26T00:30:33	simple renaming of directories: "type1z" -> "type1" "raster1" -> "raster" note that I didn't rename all files. We'll have to endure the "z1..." crazyness unless we perform a _big_ sed on the sources :-)

766b822f

2009-09-12T23:15:17

[raster] Fix 5-levels grayscale output. This was broken since version 2.3.0. * src/raster/ftraster.c (count_table): Use pre-2.3.0 values (which were then computed dynamically). (Vertical_Gray_Sweep_Step): Updated. (ft_black_render): Initialize `worker->gray_lines' (problem found by valgrind). (FT_RASTER_OPTION_ANTI_ALIASING, DEBUG_RASTER): Dont' #undef, just comment out.

0d02317f

2009-07-09T09:21:46

[ftraster] Make it compile again with -D_STANDALONE_. * src/raster/ftraster.c [_STANDALONE_]: Define FT_CONFIG_STANDARD_LIBRARY_H. Include `string.h'. Don't include `rastpic.h'. Define FT_DEFINE_RASTER_FUNCS.

858abbed

2009-06-26T06:15:41

For warning messages, replace FT_ERROR with FT_TRACE0. FT_ERROR is now used only if a function produces a non-zero `error' value. Formatting, improving and harmonizing debug strings.

82622131

2009-06-18T15:48:21

Whitespace & documentation improvements.

72271140

2009-06-18T15:42:52

Fix B/W rasterization of subglyphs with different drop-out modes. Normally, the SCANMODE instruction (if present) to set the drop-out mode in a TrueType font is located in the `prep' table only and thus valid for all glyphs. However, there are fonts like `pala.ttf' which additionally contain this instruction in the hinting code of some glyphs (but not all). As a result it can happen that a composite glyph needs multiple drop-out modes for its subglyphs since the rendering state gets reset for each subglyph. FreeType collects the hinted outlines from all subglyphs, then it sends the data to the rasterizer. It also sends the drop-out mode -- after hinting has been applied -- and here is the error: It sends the drop-out mode of the last subglyph only; drop-out modes of all other subglyphs are lost. This patch fixes the problem; it adds a second, alternative mechanism to pass the drop-out mode: For each contour, the rasterizer now checks the first `tags' array element. If bit 2 is set, bits 5-7 contain the contour's drop-out mode, overriding the global drop-out mode. * include/freetype/ftimage.h (FT_CURVE_TAG_HAS_SCANMODE): New macro. * src/truetype/ttgload.c (TT_Hint_Glyph): Store drop-out mode in `tags[0]'. * src/raster/ftraster.c (Flow_Up, Overshoot_Top, Overshoot_Bottom): Use bits 3-5 instead of 0-2. (New_Profile): Set the drop-out mode in the profile's `flags' field. (Decompose_Curve): Check `tags[0]' and set `dropOutControl' if necessary. (Vertical_Sweep_Drop, Horizontal_Sweep_Drop, Horizontal_Gray_Sweep_Drop, Draw_Sweep): Use the profile's drop-out mode.

42206ad8

2009-06-16T15:14:21

Improve scan conversion rules 4 and 6. Two new constraints are introduced to better identify a `stub' -- a concept which is only vaguely described in the OpenType specification. The old code was too rigorous and suppressed more pixel than it should. . The intersection of the two profiles with the scanline is less than a half pixel. Code related to this was already present in the sources but has been commented out. . The endpoint of the original contour forming a profile has a distance (`overshoot') less than half a pixel to the scanline. Note that the two additional conditions fix almost all differences to the Windows rasterizer, but some problematic cases remain. * src/raster/ftraster.c (Overshoot_Top, Overshoot_Bottom): New macros for the `flags' field in the `TProfile' structure. (IS_BOTTOM_OVERSHOOT, IS_TOP_OVERSHOOT): New macros. (New_Profile, End_Profile): Pass overshoot flag as an argument and set it accordingly. Update callers. (Vertical_Sweep_Drop, Horizontal_Sweep_Drop): Implement the two new constraints.

0409ef32

2009-06-11T17:32:31

Increase precision for B/W rasterizer. * src/raster/ftraster.c (Set_High_Precision): Add two more bits to the precision. This corrects rendering of some small glyphs, for example, glyph `xi' in verdana.ttf at 13 ppem. Testing with ftbench on my GNU/Linux box I don't see a performance degradation.

2f2b780e

2009-06-07T08:29:30

Simplify math. Suggested by Alexei Podtelezhnikov <apodtele@gmail.com>. * src/raster/ftraster.c (Vertical_Sweep_Drop, Horizontal_Sweep_Drop, Horizontal_Gray_Sweep_Drop): Do it.

90c699af

2009-06-05T10:37:15

Preparation for fixing scan conversion rules 4 and 6. * src/raster/ftraster.c (TFlow): Replace enumeration with... (Flow_Up): This macro. (TProfile): Replace `flow' member with `flags' bit field. Update all affected code.

cbdba615

2009-06-03T08:53:47

Typo, formatting.

19fbc576

2009-05-22T09:20:25

Improve b/w rasterizer. Problem reported by Krzysztof Kotlenga <pocek@users.sf.net>. * src/raster/raster.c (Vertical_Sweep_Drop, Horizontal_Sweep_Drop, Horizontal_Gray_Sweep_Drop): For smart drop-out mode, if intersections are equally distant relative to next pixel center, select the left pixel, not the right one.

05609509

2009-04-05T18:16:13

Position Independent Code (PIC) support in raster renderer. * src/raster/ftrend1.h declare ft_raster1_renderer_class and ft_raster5_renderer_class using macros from ftrender.h, when FT_CONFIG_OPTION_PIC is defined create and destroy functions will be declared. * src/smooth/ftrend1.c when FT_CONFIG_OPTION_PIC is defined ft_raster1_renderer_class and ft_raster5_renderer_class structs will have functions to init or create and destroy them instead of being allocated in the global scope. Macros will be used from rastpic.h in order to access ft_standard_raster from the pic_container (allocated in ftraster.c). In ft_raster1_render when PIC is enabled, the last letter of module_name is used to verfy the renderer class rather than the class pointer. * src/raster/ftraster.c when FT_CONFIG_OPTION_PIC is defined ft_standard_raster struct will have function to init it instead of being allocated in the global scope. New Files: * src/raster/rastpic.h declare struct to hold PIC globals for raster renderer and macros to access them. * src/raster/rastpic.c implement functions to allocate, destroy and initialize PIC globals for raster renderer. * src/raster/raster.c add new file to build: rastpic.c. * src/raster/jamfile add new files to FT2_MULTI build: rastpic.c.

b66efefd

2009-03-12T08:07:49

Fix some FreeType Coverity issues as reported for Ghostscript. * src/base/ftobjs.c (FT_New_Face, FT_New_Memory_Face): Initialize `args.stream' (#3874, #3875). (open_face_PS_from_sfnt_stream): Improve error management (#3786). * src/base/ftmm.c (ft_face_get_mm_service): Fix check of `aservice' (#3870). * src/base/ftstroke.c (ft_stroke_border_get_counts): Remove dead code (#3790). * src/base/ftrfork.c (raccess_guess_apple_generic): Check error value of `FT_Stream_Skip' (#3784). * src/type1/t1gload.c (T1_Load_Glyph): Check `size' before accessing it (#3872) * src/pcf/pcfdrivr.c (PCF_Glyph_Load): Check `face' before accessing it (#3871). * src/pcf/pcfread.c (pcf_get_metrics): Handle return value of `pcf_get_metric' (#3789, #3782). (pcf_get_properties): Use FT_STREAM_SKIP (#3783). * src/cache/ftcmanag.c (FTC_Manager_RegisterCache): Fix check of `acache' (#3797) * src/cff/cffdrivr.c (cff_ps_get_font_info): Fix check of `cff' (#3796). * src/cff/cffgload.c (cff_decoder_prepare): Check `size' (#3795). * src/cff/cffload.c (cff_index_get_pointers): Add comment (#3794). * src/bdf/bdflib.c (_bdf_add_property): Check `fp->value.atom' (#3793). (_bdf_parse_start): Add comment (#3792). * src/raster/ftraster.c (Finalize_Profile_Table): Check `ras.fProfile' (#3791). * src/sfnt/ttsbit.c (Load_SBit_Image): Use FT_STREAM_SKIP (#3785). * src/gzip/ftgzip.c (ft_gzip_get_uncompressed_size): Properly ignore seek error (#3781).

f47acf2b

2009-01-12T20:11:14

Avoid compiler warnings. * */*: s/do ; while ( 0 )/do { } while ( 0 )/. Reported by Sean McBride <sean@rogue-research.com>.

174b8de3

2008-10-12T11:47:29

* src/sfnt/sfobjs.c (sfnt_load_face): Fix computation of `underline_position'. * docs/CHANGES: Updated. Formatting, minor editing.

71b8f3f2

2008-07-04T07:22:06

* src/raster/ftraster.c (Draw_Sweep): If span is smaller than one pixel, only check for dropouts if neither start nor end point lies on a pixel center. This fixes Savannah bug #23762.

a741c6f2

2008-06-27T06:58:48

* src/raster/ftraster.c (Vertical_Sweep_Drop, Horizontal_Sweep_Drop, Horizontal_Gray_Sweep_Drop): Test for intersections which degenerate to a single point can be ignored; this has been confirmed by Greg Hitchcock from Microsoft. (This was commented out code.)

ce8853af

2008-06-24T11:19:03

* src/truetype/ttinterp. (Ins_SCANTYPE): Don't check rendering mode. * src/raster/ftraster.c (Render_Glyph, Render_Gray_Glyph, Draw_Sweep): No-dropout mode is value 2, not value 0. (Draw_Sweep): Really skip dropout handling for no-dropout mode.

5df5dbb7

2008-06-22T13:40:08

Enable access to the various dropout rules of the B&W rasterizer. Pass dropout rules from the TT bytecode interpreter to the rasterizer; temporarily this is enabled only if `USE_SCAN_CONVERSION_RULES' is defined. * include/freetype/ftimage.h (FT_OUTLINE_SMART_DROPOUTS, FT_OUTLINE_EXCLUDE_STUBS): New flags for for FT_Outline. * src/raster/ftraster.c (Vertical_Sweep_Drop, Horizontal_Sweep_Drop, Horizontal_Gray_Sweep_Drop): Use same mode numbers as given in the OpenType specification. Fix mode 4 computation. (Render_Glyph, Render_Gray_Glyph): Handle new outline flags. * src/truetype/ttgload.c (TT_Load_Glyph) [USE_SCAN_CONVERSION_RULES]: Convert scan conversion mode to FT_OUTLINE_XXX flags. * src/truetype/ttinterp.c (Ins_SCANCTRL): Enable ppem check.

c9381318

2008-05-25T12:19:34

* src/raster/ftraster.c (fc_black_render): Return 0 when we are trying to render into a zero-width/height bitmap, not an error code.

1ddd1b76

2008-01-16T06:58:54

* src/raster/ftraster.c (ft_black_render): Check `outline' before using it. Reported by Allan Yang.

eca1f279

2008-01-12T07:46:09

* src/raster/ftraster.c (FT_CONFIG_OPTION_5_GRAY_LEVELS): Remove. * src/raster/ftraster.c (ft_black_init) [FT_RASTER_OPTION_ANTI_ALIASING]: Fix compilation.

39c91ad4

2007-07-28T05:40:40

* src/raster/ftraster.c (count_table): Make it conditional. * src/base/ftobjs.c (FT_New_Library): Check FT_RENDER_POOL_SIZE with a preprocessor statement.

6e87ed9f

2007-01-26T22:18:56

Spelling fixes from Alexei.

4ea0a7f0

2007-01-05T09:03:31

formatting, minor doc fixes, copyright years

38d1002b

2007-01-04T18:50:12

* src/raster/ftraster.c: removing dynamically generated "count_table", and replace it with a constant array of bytes

8a2c7f8f

2007-01-04T18:33:12

* src/raster/ftraster.c, src/smooth/ftgrays.c: small optimization, the rasterizers now uses the render pool to store their state during scanline convertion. this saves about 6 KB of heap space for each FT_Library instance

8ae1dceb

2005-05-20T06:22:20

* include/freetype/ftimage.h (FT_Raster_Params), include/freetype/ftoutln.h (FT_Outline_Translate, FT_Outline_Transform), src/base/ftoutln.c (FT_Outline_Translate, FT_Outline_Transform): Decorate parameters with `const' where appropriate. Update all callers. * src/raster/ftraster.c (ft_black_reset), src/smooth/ftgrays.c (gray_raster_reset): Remove `const' from `pool_base' argument.

f9fccbee

2005-05-19T07:20:24

* src/raster/ftmisc.h: New file. Only needed if ftraster.c is compiled as stand-alone. * src/raster/ftraster.c: Add comment how to compile as stand-alone. s/FT_CONFIG_OPTION_STATIC_RASTER/FT_STATIC_RASTER/. s/TT_STATIC_RASTER/FT_STATIC_RASTER/. [_STANDALONE_]: Include ftimage.h and ftmisc.h. (FT_TRACE1, FT_TRACE6, ft_memset, FT_MEM_ZERO): Define conditionally. (Render_Glyph, Render_Gray_Glyph): Return Raster_Err_None (or Raster_Err_Unsupported). (ft_black_new) [_STANDALONE_]: Fix type of `the_raster'. (ft_black_init, ft_black_reset, ft_black_set_mode, ft_black_render): Use `ras', not `raster'. (ft_black_done): Use FT_UNUSED_RASTER. (Horizontal_Sweep_Init, Horizontal_Sweep_Step, Horizontal_Gray_Sweep_Span): Use FT_UNUSED_RASTER. * docs/CHANGES: Updated.

ce235eaf

2005-05-17T20:35:23

* builds/win32/visualc/freetype.vcproj: Updated. Exclude debug info for `Release' versions to reduce library size. * src/base/ftobjs.c (FT_Open_Face): Make it work as documented, this is, ignore `aface' completely if face_index < 0. Reported by David Osborn <spam@habitualhiatus.com>. * include/freetype/ftimage.h (FT_Outline_MoveToFunc, FT_Outline_LineTo_Func, FT_Outline_ConicToFunc, FT_Outline_CubicToFunc), src/smooth/ftgrays.c (gray_render_conic, gray_render_cubic, gray_move_to, gray_line_to, gray_conic_to, gray_cubic_to, gray_render_span, gray_sweep): Decorate parameters with `const' where appropriate.

fa420250

2005-05-11T20:04:35

* include/freetype/ftimage.h (FT_Raster_RenderFunc), include/freetype/ftrender.h (FT_Glyph_TransformFunc, FT_Renderer_Render_Func, FT_Renderer_TransformFunc), src/base/ftglyph.c (ft_outline_glyph_transform), src/raster/ftrend1.c (ft_raster1_transform, ft_raster1_render), src/smooth/ftgrays.c (FT_Outline_Decompose, gray_raster_render), src/smooth/ftsmooth.c (ft_smooth_transform, ft_smooth_render_generic, ft_smooth_render, ft_smooth_render_lcd, ft_smooth_render_lcd_v): Decorate parameters with `const' where appropriate. * src/raster/ftraster.c (RASTER_RENDER_POOL): Removed. Obsolete. (ft_black_render): Decorate parameters with `const' where appropriate. * src/sfnt/ttcmap.c (tt_cmap4_set_range): Fix typo (FT_PEEK_SHORT -> FT_PEEK_USHORT) which caused crashes. Reported by Ismail Donmez <ismail@kde.org.tr>.

c01c9042

2005-04-14T16:03:15

* include/freetype/freetype.h (FT_Vector_Transform), include/freetype/ftimage.h (FT_Raster_Params), include/freetype/ftoutln.h, src/base/ftoutln.c (FT_Outline_Get_CBox, FT_Outline_Copy, FT_Outline_Transform, FT_Vector_Transform, FT_Outline_Get_Bitmap), src/raster/ftraster.c (ft_black_render), src/smooth/ftgrays.c (gray_raster_render): Decorate parameters with `const' where appropriate. * src/sfnt/ttsbit0.c (tt_sbit_decoder_load_image): Fix arguments to call of tt_sbit_decoder_load_bitmap.

e5bcbf95

2005-04-01T23:57:31

Add comment about hard-coded dropout mode.

fefd8742

2004-06-12T13:21:20

* docs/CHANGES: Updated. Minor clean-ups.

8530a228

2004-06-09T20:18:35

* include/freetype/freetype.h (FT_Glyph_Metrics, FT_GlyphSlotRec), src/autofit/afloader.c, src/autohint/ahhint.c: moved the definition of 'lsb_delta' and 'rsb_delta' from FT_GlyphMetrics to FT_GlyphSlotRec. The old location did BREAK BINARY COMPATIBILITY of the library !! * src/sfnt/sfobjs.c: removing compiler warning

73861976

2003-06-05T04:31:05

* include/freetype/internal/ftdriver.h, include/freetype/internal/ftobjs.h, include/freetype/internal/psaux.h, src/cid/cidgload.c, src/psaux/psobjs.c, src/psaux/t1decode.c, src/psaux/psobjs.h, src/pshinter/pshrec.c, src/pshinter/pshalgo.c, src/psnames/psmodule.c, src/raster/ftraster.c, src/sfnt/sfobjs.c, src/smooth/ftgrays.c, src/smooth/ftsmooth.c, src/truetype/ttobjs.c, src/truetype/ttdriver.c, src/truetype/ttgload.c, src/type1/t1afm.c, src/type1/t1gload.c, src/type1/t1gload.h, src/type1/t1load.c, src/type1/t1objs.c, src/type42/t42parse.c, src/type42/t42parse.h: Many casts and slight argument type changes to make it work with a 16bit compiler.

51daa4fe

2003-05-18T22:40:11

* src/raster/ftraster.c (Insert_Y_Turn): Fix overflow test. * include/freetype/config/ftoption.h [FT_CONFIG_OPTION_MAC_FONTS]: New macro. * src/base/ftobjs.c: Use it to control mac font support on non-mac platforms. Implement partial support of Mac fonts on non-Mac platforms. * src/base/ftobjs.c (memory_stream_close, new_memory_stream, open_face_from_buffer, Mac_Read_POST_Resource, Mac_Read_sfnt_Resource, IsMacResource, IsMacBinary, load_mac_face) [!FT_MACINTOSH]: New functions. (FT_Open_Face) [!FT_MACINTOSH]: Use load_mac_face. * src/base/ftobjs.c (FT_Load_Glyph): Scale linear advance width only if FT_FACE_FLAG_SCALABLE is set (otherwise we have a division by zero since FNT and friends don't define `face->units_per_EM').

68e9f927

2002-09-27T11:09:23

* src/sfnt/ttpost.c (load_post_names, tt_face_free_ps_names, tt_face_get_ps_name): Replace switch statement with if clauses to make it more portable. * src/cff/cffobjs.c (cff_face_init): Ditto. * include/freetype/ftmodule.h (FT_Module_Class): Use `FT_Long' for `module_size'. * include/freetype/ftrender.h (FT_Glyph_Class_): Use `FT_Long' for `glyph_size'. * src/base/ftobjs.c (FT_Render_Glyph): Change second parameter to `FT_Render_Mode'. (FT_Render_Glyph_Internal): Change third parameter to `FT_Render_Mode'. * src/base/ftglyph.c (FT_Glyph_To_Bitmap): Change second parameter to `FT_Render_Mode'. * src/raster/ftrend1.c (ft_raster1_render): Change third parameter to `FT_Render_Mode'. * src/smooth/ftsmooth.c (ft_smooth_render, ft_smooth_render_lcd, ft_smooth_render_lcd_v): Ditto. (ft_smooth_render_generic): Change third and fifth parameter to `FT_Render_Mode'. * include/freetype/freetype.h, include/freetype/internal/ftobjs.h, include/freetype/ftglyph.h: Updated. * src/cff/cffdrivr.c (Load_Glyph), src/pcf/pcfdriver.c (PCF_Glyph_Load), src/pfr/pfrobjs.c (pfr_slot_load), src/winfonts/winfnt.c (FNT_Load_Glyph), src/t42/t42objs.c (T42_GlyphSlot_Load), src/bdf/bdfdrivr.c (BDF_Glyph_Load): Change fourth parameter to `FT_Int32'. * src/pfr/pfrobjs.c (pfr_face_init): Add two missing parameters and declare them as unused. * src/cid/cidparse.h (CID_Parser): Use FT_Long for `postscript_len'. * src/psnames/psnames.h (PS_Unicode_Value_Func): Change return value to FT_UInt32. * src/psnames/psmodule.c (ps_unicode_value, ps_build_unicode_table): Updated accordingly. * src/cff/cffdrivr.c (Get_Kerning): Use FT_Long for `middle'. (cff_get_glyph_name): Use cast for result of ft_strlen. * src/cff/cffparse.c (cff_parse_real): User cast for assigning `exp'. * src/cff/cffload.c (cff_index_get_pointers): Use FT_ULong for some local variables. (cff_charset_load, cff_encoding_load): Use casts to FT_UInt for some switch statements. (cff_font_load): Use cast in call to CFF_Load_FD_Select. * src/cff/cffobjs.c (cff_size_init): Use more casts. (cff_face_init): Use FT_Int32 for `flags'. * src/cff/cffgload.c (cff_operator_seac): Use cast for assigning `adx' and `ady'. (cff_decoder_parse_charstrings): Use FT_ULong for third parameter. Use more casts. * src/cff/cffcmap.c (cff_cmap_unicode_init): Use cast for `count'. * src/cid/cidload.c (cid_read_subrs): Use FT_ULong for `len'. * src/cid/cidgload.c (cid_load_glyph): Add missing cast for `cid_get_offset'. * src/psaux/t1decode.c (t1_decoder_parse_charstrings) <18>: Use cast for `num_points'. (t1_decoder_init): Use cast for assigning `decoder->num_glyphs'. * src/base/ftdebug.c (ft_debug_init): Use FT_Int. * include/freetype/internal/ftdriver.h (FT_Slot_LoadFunc): Use `FT_Int32' for fourth parameter. * src/base/ftobjs.c (open_face): Use cast for calling clazz->init_face. * src/raster/ftraster.c (Set_High_Precision): Use `1' instead of `1L'. (Finalize_Profile_Table, Line_Up, ft_black_init): Use casts. * src/raster/ftrend1.c (ft_raster1_render): Ditto. * src/sfnt/sfnt_dir_check: Compare `magic' with unsigned long constant. * builds/amiga/include/freetype/config/ftmodule.h: Updated.

b08fe2dc

2002-08-27T20:20:29

* massive re-formatting changes to many, many source files. I don't want to list them all here. The operations performed were all logical transformations of the sources: - trying to convert all enums and constants to CAPITALIZED_STYLE, with #define definitions like #define my_old_constants MY_NEW_CONSTANT - big, big update of the documentation comments * include/freetype/freetype.h, src/base/ftobjs.c, src/smooth/ftsmooth.c, include/freetype/ftimage.h: adding support for LCD-optimized rendering though the new constants/enums: FT_RENDER_MODE_LCD, FT_RENDER_MODE_LCD_V FT_PIXEL_MODE_LCD, FT_PIXEL_MODE_LCD_V this is still work in progress, don't expect everything to work correctly though most of the features have been implemented. * adding new FT_LOAD_XXX flags, used to specify both hinting and rendering targets: FT_LOAD_TARGET_NORMAL :: anti-aliased hinting & rendering FT_LOAD_TARGET_MONO :: monochrome bitmaps FT_LOAD_TARGET_LCD :: horizontal RGB/BGR decimated hinting & rendering FT_LOAD_TARGET_LCD_V :: vertical RGB/BGR decimated hinting & rendering note that FT_LOAD_TARGET_NORMAL is 0, which means that the default behaviour of the font engine is _unchanged_.

3c403e4c

2002-08-06T21:47:40

Some formatting. * src/cff/cffcmap.c: Remove compiler warnings. * src/cache/ftccache.c, src/cache/ftccache.i, src/pfr/pfrload.c, src/pfr/pfrgload.c: s/index/idx/. * src/cff/cffload.c: s/select/fdselect/. * src/raster/ftraster.c: s/wait/waiting/.

b3d5e9cf

2002-07-28T05:05:24

s/ft_memset/FT_MEM_SET/. s/FT_MEM_SET/FT_MEM_ZERO/ where appropriate.

9ca7a157

2002-04-30T14:26:49

* src/base/ftmac.c (p2c_str): Removed. (file_spec_from_path) [TARGET_API_MAC_CARBON]: Added support for OS X. (is_dfont) [TARGET_API_MAC_CARBON]: Define only for OS X. Handle `nameLen' <= 6 also. (parse_fond): Remove unused variable `name_table'. Use functionality of old p2c_str directly. Add safety checks. (read_lwfn): Initialize `size_p'. Check for size_p == NULL. (new_memory_stream, open_face_from_buffer): Updated to FreeType 2.1. (FT_New_Face_From_LWFN): Remove unused variable `memory'. Remove some dead code. (FT_New_Face_From_SFNT): Remove unused variable `stream'. (FT_New_Face_From_dfont) [TARGET_API_MAC_CARBON]: Define only for OS X. (FT_New_Face_From_FOND): Remove unused variable `error'. (ResourceForkSize): New function. (FT_New_Face): Use it. Handle empty resource forks. Conditionalize some code for OS X. Add code to call normal loader as a fallback. Some more variable renames to avoid troubles on the Mac. * src/raster/ftraster.c: s/Unknown|Ascending|Descending|Flat/\1_State/. * src/smooth/ftgrays.c: s/TScan/TCoord/. Other changes for the Mac. * include/freetype/config/ftconfig.h: Define FT_MACINTOSH for Mac platforms. * src/base/ftobjs.c: s/macintosh/FT_MACINTOSH/. * src/raster/ftrend1.c (ft_raster1_render): Make `pitch' always an even number.

94ffae52

2002-04-14T00:54:32

* src/cff/cffgload.c (CFF_Parse_CharStrings): s/rand/Rand/ to avoid compiler warning. formatting/fixing ChangeLog

d15bc0d1

2002-04-12T09:31:48

* README.UNX: updated the Unix-specific quick-compilation guide to warn about the GNU Make requirement at compile time.. * include/freetype/config/ftstdlib.h, include/freetype/config/ftconfig.h, include/freetype/config/ftheader.h, include/freetype/internal/ftmemory.h, include/freetype/internal/ftobjs.h, src/autohint/ahoptim.c, src/base/ftdbgmem.c, src/base/ftdebug.c, src/base/ftmac.c, src/base/ftobjs.c, src/base/ftsystem.c, src/cache/ftcimage.c, src/cache/ftcsbits.c, src/cff/cffdriver.c, src/cff/cffload.c, src/cff/cffobjs.c, src/cid/cidload.c, src/cid/cidparse.c, src/cid/cidriver.c, src/pcf/pcfdriver.c, src/pcf/pcfread.c, src/psaux/t1cmap.c, src/psaux/t1decode.c, src/pshinter/pshalgo1.c, src/pshinter/pshalgo2.c, src/pshinter/pshrec.c, src/psnames/psmodule.c, src/raster/ftraster.c, src/sfnt/sfdriver.c, src/sfnt/ttload.c, src/sfnt/ttpost.c, src/smooth/ftgrays.c, src/type1/t1afm.c, src/type1/t1driver.c, src/type1/t1gload.c, src/type1/t1load.c, src/type1/t1objs.c, src/type1/t1parse.c: added the new configuration file "ftstdlib.h" used to define aliases for all ISO C library functions used by the engine (e.g. strlen, qsort, setjmp, etc...) this eases the porting of FreeType 2 to exotic environments like XFree86 modules/extensions.. also removed many #include <string.h>, #include <stdlib.h>, etc... from the engine's sources where they're not needed..

b7b163cb

2002-03-31T18:48:24

* src/sfnt/ttcmap.c: 16bit fixes (0xFFFF -> 0xFFFFU). * src/sfnt/ttcmap0.c: 16bit fixes. (TT_Build_CMaps): Simplify debug messages. (tt_cmap12_char_next): Fix offset. * src/sfnt/ttload.c (TT_Load_Names, TT_Load_CMap): Fix debug messages. (TT_Load_OS2): 16bit fix.

e459d742

2002-03-22T13:52:37

* include/freetype/internal/ftmemory.h, and a lot of other files !!: changed the names of memory macros. Examples: MEM_Set => FT_MEM_SET MEM_Copy => FT_MEM_COPY MEM_Move => FT_MEM_MOVE ALLOC => FT_ALLOC FREE => FT_FREE REALLOC = >FT_REALLOC FT_NEW was introduced to allocate a new object from a _typed_ pointer.. note that ALLOC_ARRAY and REALLOC_ARRAY have been replaced by FT_NEW_ARRAY and FT_RENEW_ARRAY which take _typed_ pointer arguments. This results in _lots_ of sources being changed, but makes the code more generic and less error-prone..

bc82f1bb

2002-03-01T02:26:22

* include/freetype/ftconfig.h: changed FT_LOCAL xxxx to FT_LOCAL( xxxx ) everywhere in the source. Sames goes for FT_LOCAL_DEF xxxx translated into FT_LOCAL_DEF( xxxxx )

c3b21608

2001-12-05T01:22:05

Formatting. Cleaning up of ChangeLog. * docs/license.txt: s/X Windows/X Window System/. * src/raster/ftraster.c: Fix definition condition of MEM_Set(). * src/smooth/ftgrays.c (M_Y): Change value to 192. * src/base/ftdbgmem.c (ft_mem_table_destroy): Fix printf() parameter. Remove unused variable. * src/cache/ftcimage.c (ftc_image_node_init, ftc_image_node_compare): Remove unused variables. * src/cache/ftcsbits.c (ftc_sbit_node_weight): Remove unused variable. * src/raster/ftraster.c (MEM_Set): Move definition down to avoid compiler warning. * src/autohint/ahhint.c (ah_hinter_hint_edges): Use UNUSED() to avoid compiler warnings. * src/pcf/pcfread.c (tableNames): Use `const'. (pcf_read_TOC): Change counter name to avoid compiler warning. Use `const'. * src/pshinter/pshrec.c (ps_hints_close): Remove redundant declaration. * src/pshinter/pshalgo1.c (psh1_hint_table_init): Rename variables to avoid shadowing. * src/pshinter/pshalgo2.c (psh2_hint_table_activate_mask): Ditto. * src/type1/t1objs.h: Remove double declarations of `T1_Size_Init()' and `T1_Size_Done()'.

5a1de37e

2001-10-24T07:32:55

replaced liberal uses of "memset" by the "MEM_Set" macro call (some platforms don't provide this ANSI function !!) some changes to "ftsystem.c" implementations in order to use the new memory debugger on Unix, VMS and Amiga too !!

ea5a981c

2001-10-17T14:29:51

minimal optimisation submitted by Graham Asher

415235df

2001-06-28T17:49:10

finishing function header formatting updating copyrights

52005c30

2001-06-27T23:25:46

formatting

8eb0353f

2001-06-19T23:03:41

Formatting.

8edbcabc

2001-06-19T08:28:24

- updated doc for FT_New_Memory_Face - removed lots of compiler warnings in lint-style warning modes (/W4 with Visual C++)

1f7f0e87

2001-06-06T17:30:41

Complete redesign of error codes. Please check ftmoderr.h for more details. * include/freetype/internal/cfferrs.h, include/freetype/internal/tterrors.h, include/freetype/internal/t1errors.h: Removed. Replaced with files local to the module. All extra error codes have been moved to `fterrors.h'. * src/sfnt/ttpost.h: Move error codes to `fterrors.h'. * src/autohint/aherrors.h, src/cache/ftcerror.h, src/cff/cfferrs.h, src/cid/ciderrs.h, src/pcf/pcferror.h, src/psaux/psauxerr.h, src/psnames/psnamerr.h, src/raster/rasterrs.h, src/sfnt/sferrors.h, src/smooth/ftsmerrs.h, src/truetype/tterrors.h, src/type1/t1errors.h, src/winfonts/fnterrs.h: New files defining the error names for the module it belongs to. * include/freetype/ftmoderr.h: New file, defining the module error offsets. Its structure is similar to `fterrors.h'. * include/freetype/fterrors.h (FT_NOERRORDEF): New macro. (FT_ERRORDEF): Redefined to use module error offsets. All internal error codes are now public; unused error codes have been removed, some are new. * include/freetype/config/ftheader.h (FT_MODULE_ERRORS_H): New macro. * include/freetype/config/ftoption.h (FT_CONFIG_OPTION_USE_MODULE_ERRORS): New macro. All other source files have been updated to use the new error codes; some already existing (internal) error codes local to a module have been renamed to give them the same name as in the base module. All make files have been updated to include the local error files. * src/cid/cidtokens.h: Replaced with... * src/cid/cidtoken.h: This file for 8+3 consistency. * src/raster/ftraster.c: Use macros for header file names.

caf72cd6

2001-04-25T18:11:16

* src/base/ftbbox.c (BBox_Cubic_Check): rewrote function to use direct computations with 16.16 values instead of sub-divisions. It is now slower, but proves a point :-) * src/raster/ftraster.c, src/smooth/ftgrays.c, src/base/ftbbox.c : fixed the bezier stack depths.. * src/base/ftcalc.c (FT_MulFix): minor rounding fix * builds/beos : added BeOS-specific files to the old build system (no changes were necessary to support BeOS in the Jamfile though)

8d3a401f

2001-03-20T11:14:24

* builds/*/*-def.mk: changed the objects directory from "obj" to "objs" * include/freetype/config/ftheader.h: removed obsolete macros like FT_SOURCE_FILE, etc.. and added cache-specific macro definitions that were previously defined in <freetype/ftcache.h>. Added comments to be included in a new API Reference section. * src/*/*: removed the use of FT_SOURCE_FILE, etc.. now, each component needs to added its own directory to the include path at compile time. Modified all "rules.mk" and "descrip.mms" accordingly..

914b289f

2001-03-10T17:07:42

* src/*/*.c: Added many casts to make code more 64bit-safe.

1eb9a43a

2000-12-14T21:24:27

fixed small bug (no need to test target pixmap in direct rendering mode)

170c0d4c

2000-12-13T19:55:11

* include/freetype/config/ft2build.h, include/freetype/internal/internal.h: fixed header inclusion macros to use direct definitions. This is the only way to do these things in a portable way :-( The rest of the code should follow shortly though everything compiles now.. * builds/compiler/intelc.mk, builds/compiler/watcom.mk, builds/win32/detect.mk: added support for the Intel C/C++ compiler, as well as _preliminary_ (read: doesn't work !!) support for Watcom. Also added a new setup target. Type "make setup list" for a list of supported command-line compilers on Win32..

d5c1b27d

2000-12-12T22:28:12

* include/freetype/config/ft2build.h (FT2_ROOT, FT2_CONFIG_ROOT): Removed. ANSI C doesn't (explicitly) allow macro expansion in arguments using `##'. (FT2_PUBLIC_FILE, FT2_CONFIG_FILE, FT2_INTERNAL_FILE): Use directory names directly. Make them configurable. Use `##' to strip leading and trailing spaces from arguments. * builds/unix/ft2unix.h: Adapted. * src/base/ftsystem.c (ft_alloc, ft_realloc, ft_free, ft_io_stream, ft_close_stream): Use FT_CALLBACK_DEF. * builds/unix/ftsystem.c: Use new header scheme. (FT_Done_Memory): Use free() from FT_Memory structure. * src/base/ftinit.c, src/base/ftmac.c: Header scheme fixes. * include/freetype/config/ft2build.h (FT2_CONFIG_ROOT, FT2_PUBLIC_FILE, FT2_CONFIG_FILE, FT2_INTERNAL_FILE, FT_SOURCE_FILE): Use `##' operator to be really ANSI C compliant.

19ed8afe

2000-12-08T02:42:29

- updated all source files to adhere to the new inclusion scheme - the CFF loader now loads the encodings and charset tables though doesn't use them for now

76a5f623

2000-11-04T01:55:49

major reformatting of the sources: FT_EXPORT_DEF => FT_EXPORT FT_EXPORT_FUNC => FT_EXPORT_DEF BASE_DEF => FT_BASE BASE_FUNC => FT_BASE_DEF LOCAL_DEF => FT_LOCAL LOCAL_FUNC => FT_LOCAL_DEF LOCAL_FUNC_X => FT_CALLBACK_DEF LOCAL_DEF_X => FT_CALLBACK_TABLE FT_CPLUSPLUS => FT_CALLBACK_TABLE_DEF

a4e2894e

2000-10-26T00:30:33

simple renaming of directories: "type1z" -> "type1" "raster1" -> "raster" note that I didn't rename all files. We'll have to endure the "z1..." crazyness unless we perform a _big_ sed on the sources :-)

kc3-lang/freetype/src/raster/ftraster.c

src/raster/ftraster.c

Log