kmx git

Commit	Date	Message
e161ee44	2000-07-10T22:03:10	fixed a bug that caused invalid clipping of monochrome bitmaps when they were blitted on the left edge of an 8-bit pixmap..
b48a6094	2000-07-09T19:15:30	Formatting. Moving some internal structures and constants from freetype.h to ftobjs.h. Finally removing FT_LOAD_ANTI_ALIAS. Cleaning up all error codes. Only the used ones have survived :-) Removed unused FT_MAX_GLYPH_FORMATS constant. T2 error codes are now in the range 0x500-0x5FF (instead of `TrueDoc'). Some minor improvements of error return values. Finally fixing error code values in ftraster and ftgrays to be compliant with all other FT error codes.
7fa51b55	2000-07-08T19:51:42	Formatting. Adding some trivial error checking. Adding/Fixing tracing levels.
a90663f5	2000-07-08T00:41:13	vast clean-up of the sources in order to allow flat directory compilation (by defining the FT_FLAT_COMPILE macro at compile time..) moved "freetype2/BUILD" to "freetype2/docs/BUILD"
c6a92202	2000-07-04T18:12:13	various clean-ups: - using FT_UNUSED instead of UNUSED - using FT_LONG64 and FT_INT64 instead of LONG64 & INT64 - using FT_SIZEOF_INT & FT_SIZEOF_LONG instead of... - removed the #ifdefs that used SIZEOF_INT, instead we now use FT_Int32 and FT_UInt32 when needed to support 32-bits quantity correctly on 64-bits systems..
768c9561	2000-07-03T07:09:09	Formatting. Fixing some tracing messages.
f9ca2bb5	2000-06-30T23:12:55	managed to re-design entirely the API in <freetype/ftglyph.h> It is now really the "glyph factory" that Stefan was probably dreaming about.. fixed some recent formatting errors from Werner ;-) cleaned up the demonstration programs from most of the rust that they had, though I'm sure someone is going to re-format them really soon !! "ftstring" now uses the new ftglyph.h API, and is now faster and smaller.. yep..
ac39ecdc	2000-06-30T22:24:36	Formatting... Fixing incorrect scaling of vertical advance width.
cc9fc49c	2000-06-30T06:21:26	Formatting... Applying some fixes from Tom.
5ae831c1	2000-06-30T01:31:22	changes used to implement the auto-hinting support
32b85e67	2000-06-29T21:48:58	various bug fixes in the postscript font drivers (mainly they added one un-necessary point to each contour..)
7ed5a057	2000-06-27T23:23:22	small bugfix
a929ba9b	2000-06-25T06:47:11	applying formatting again
7802d466	2000-06-23T04:18:55	*top++-bug was not a compiler bug, therefore the comment about the affected compiler was misleading and has been removed
d0079e66	2000-06-23T00:07:06	improved the Type1 drivers to deal with the case where the lenIV field is set to -1 to indicate unencoded charstrings fixed some source code to prevent a compiler bug on IRIX fixed the module version's in the "type1z" driver
e82a82af	2000-06-22T00:26:11	small bugfix in the "seac" code
f0df85ba	2000-06-22T00:17:42	- MAJOR INTERNAL REDESIGN: A lot of internal modifications have been performed lately on the source in order to provide the following enhancements: - more generic module support: The FT_Module type is now defined to represent a handle to a given module. The file <freetype/ftmodule.h> contains the FT_Module_Class definition, as well as the module-loading public API The FT_Driver type is still defined, and still represents a pointer to a font driver. Note that FT_Add_Driver is replaced by FT_Add_Module, FT_Get_Driver by FT_Get_Module, etc.. - support for generic glyph image types: The FT_Renderer type is a pointer to a module used to perform various operations on glyph image. Each renderer is capable of handling images in a single format (e.g. ft_glyph_format_outline). Its functions are used to: - transform an glyph image - render a glyph image into a bitmap - return the control box (dimensions) of a given glyph image The scan converters "ftraster.c" and "ftgrays.c" have been moved to the new directory "src/renderer", and are used to provide two default renderer modules. One corresponds to the "standard" scan-converter, the other to the "smooth" one. The current renderer can be set through the new function FT_Set_Renderer. The old raster-related function FT_Set_Raster, FT_Get_Raster and FT_Set_Raster_Mode have now disappeared, in favor of the new: FT_Get_Renderer FT_Set_Renderer see the file <freetype/ftrender.h> for more details.. These changes were necessary to properly support different scalable formats in the future, like bi-color glyphs, etc.. - glyph loader object: A new internal object, called a 'glyph loader' has been introduced in the base layer. It is used by all scalable format font drivers to load glyphs and composites. This object has been created to reduce the code size of each driver, as each one of them basically re-implemented its functionality. See <freetype/internal/ftobjs.h> and the FT_GlyphLoader type for more information.. - FT_GlyphSlot had new fields: In order to support extended features (see below), the FT_GlyphSlot structure has a few new fields: linearHoriAdvance: this field gives the linearly scaled (i.e. scaled but unhinted) advance width for the glyph, expressed as a 16.16 fixed pixel value. This is useful to perform WYSIWYG text. linearVertAdvance: this field gives the linearly scaled advance height for the glyph (relevant in vertical glyph layouts only). This is useful to perform WYSIWYG text. Note that the two above field replace the removed "metrics2" field in the glyph slot. advance: this field is a vector that gives the transformed advance for the glyph. By default, it corresponds to the advance width, unless FT_LOAD_VERTICAL_LAYOUT was specified when calling FT_Load_Glyph or FT_Load_Char bitmap_left: this field gives the distance in integer pixels from the current pen position to the left-most pixel of a glyph image WHEN IT IS A BITMAP. It is only valid when the "format" field is set to "ft_glyph_format_bitmap", for example, after calling the new function FT_Render_Glyph. bitmap_top: this field gives the distance in integer pixels from the current pen position (located on the baseline) to the top-most pixel of the glyph image WHEN IT IS A BITMAP. Positive values correspond to upwards Y. loader: this is a new private field for the glyph slot. Client applications should not touch it.. - support for transforms and direct rendering in FT_Load_Glyph: Most of the functionality found in <freetype/ftglyph.h> has been moved to the core library. Hence, the following: - a transform can be specified for a face through FT_Set_Transform. this transform is applied by FT_Load_Glyph to scalable glyph images (i.e. NOT TO BITMAPS) before the function returns, unless the bit flag FT_LOAD_IGNORE_TRANSFORM was set in the load flags.. - once a glyph image has been loaded, it can be directly converted to a bitmap by using the new FT_Render_Glyph function. Note that this function takes the glyph image from the glyph slot, and converts it to a bitmap whose properties are returned in "face.glyph.bitmap", "face.glyph.bitmap_left" and "face.glyph.bitmap_top". The original native image might be lost after the conversion. - when using the new bit flag FT_LOAD_RENDER, the FT_Load_Glyph and FT_Load_Char functions will call FT_Render_Glyph automatically when needed.
9ca2af38	2000-06-21T03:03:28	A new formatting orgy. Added some `#if 0' to completely disable the CID AFM stuff. In case this is not correct please fix.
f9b8dec4	2000-06-16T19:34:52	major reformatting of the modules source code in order to get rid of most of the basic types redefinitions (i.e. FT_Int instead of "FT_Int", etc..) The format-specific prefixs like "TT_", "T1_", "T2_" & 'CID_" are now only used in relevant structures.. fixed Werner's fix to t2gload.c :-) other small bug fixes
3d99f796	2000-06-07T23:06:10	finally fixed that crazy Type 1 hinter.. it still sucks though .. ;-)
f5dcdd5c	2000-05-23T22:16:27	minor fix to the Type1 driver(s) to apply the font matrix when necessary..
e49ab25c	2000-05-16T23:44:38	formatting - removed trailing spaces
c30aea98	2000-05-12T15:01:18	another massive changes in order to completely avoid compiler warnings with GCC + "-ansi -pedantic -Wall -W" and LCC. Also fixed the compilation of "type1z" with Win32-LCC (its pre-processor is broken !!) Updated the BUILD document too
bfe2f98f	2000-05-12T12:17:15	a new massive grunt work. Redefined the EXPORT_DEF, EXPORT_FUNC, BASE_DEF and BASE_FUNC macros to let them take an argument.. This is needed to compile the library as a DLL on some platforms that have different compiler conventions..
efce08d6	2000-05-11T18:23:52	major re-organisation of the FreeType 2 directory hierarchy
82942cc2	2000-03-30T08:43:03	simple fix required by the auto-hinting module (sets the ft_outline_reverse_fill bit_flag)
ed7f62ac	2000-03-28T11:19:28	support for FT_LOAD_NO_RECURSE needed by the auto-hinter
7f615aef	2000-03-13T11:49:20	renamed all outlines functions to the FT_Outline_<action> syntax..
41dbcbf6	2000-03-09T11:46:25	reformatting, changing the FT_Outline structure: - "flags" have been renamed to "tags" - "outline_flags" have been renamed to "flags" Look for more re-formatting today..
0f99ddda	2000-03-06T13:23:32	changed the structure of FT_Outline in order to pack all outline flags in a single integer.. Changed the rest of the library and demo programs accordingly..
3188a3a1	2000-02-13T13:34:18	Sorry, forgot some changes needed to get rid of t1encode.[hc]. Here they come..
1ab77fdf	2000-02-10T18:08:17	some updates to make everything compile clean
51d4e28d	2000-02-10T13:11:43	New version of the Type 1 driver. Generates a Unicode charmap on the fly through the "psnames" module.. Now, we only need to support afm/pfm files (and maybe multiple masters) to call this driver finished !!
76bbd579	2000-01-27T13:35:16	the T1_Face definition changed slightly to clearly separate the Type 1 font content from the rest. This implied some changes to the following files.
d2b1f357	1999-12-16T23:11:37	Initial revision

e161ee44

2000-07-10T22:03:10

fixed a bug that caused invalid clipping of monochrome bitmaps when they were blitted on the left edge of an 8-bit pixmap..

b48a6094

2000-07-09T19:15:30

Formatting. Moving some internal structures and constants from freetype.h to ftobjs.h. Finally removing FT_LOAD_ANTI_ALIAS. Cleaning up all error codes. Only the used ones have survived :-) Removed unused FT_MAX_GLYPH_FORMATS constant. T2 error codes are now in the range 0x500-0x5FF (instead of `TrueDoc'). Some minor improvements of error return values. Finally fixing error code values in ftraster and ftgrays to be compliant with all other FT error codes.

7fa51b55

2000-07-08T19:51:42

Formatting. Adding some trivial error checking. Adding/Fixing tracing levels.

a90663f5

2000-07-08T00:41:13

vast clean-up of the sources in order to allow flat directory compilation (by defining the FT_FLAT_COMPILE macro at compile time..) moved "freetype2/BUILD" to "freetype2/docs/BUILD"

c6a92202

2000-07-04T18:12:13

various clean-ups: - using FT_UNUSED instead of UNUSED - using FT_LONG64 and FT_INT64 instead of LONG64 & INT64 - using FT_SIZEOF_INT & FT_SIZEOF_LONG instead of... - removed the #ifdefs that used SIZEOF_INT, instead we now use FT_Int32 and FT_UInt32 when needed to support 32-bits quantity correctly on 64-bits systems..

768c9561

2000-07-03T07:09:09

Formatting. Fixing some tracing messages.

f9ca2bb5

2000-06-30T23:12:55

managed to re-design entirely the API in <freetype/ftglyph.h> It is now really the "glyph factory" that Stefan was probably dreaming about.. fixed some recent formatting errors from Werner ;-) cleaned up the demonstration programs from most of the rust that they had, though I'm sure someone is going to re-format them really soon !! "ftstring" now uses the new ftglyph.h API, and is now faster and smaller.. yep..

ac39ecdc

2000-06-30T22:24:36

Formatting... Fixing incorrect scaling of vertical advance width.

cc9fc49c

2000-06-30T06:21:26

Formatting... Applying some fixes from Tom.

5ae831c1

2000-06-30T01:31:22

changes used to implement the auto-hinting support

32b85e67

2000-06-29T21:48:58

various bug fixes in the postscript font drivers (mainly they added one un-necessary point to each contour..)

7ed5a057

2000-06-27T23:23:22

small bugfix

a929ba9b

2000-06-25T06:47:11

applying formatting again

7802d466

2000-06-23T04:18:55

*top++-bug was not a compiler bug, therefore the comment about the affected compiler was misleading and has been removed

d0079e66

2000-06-23T00:07:06

improved the Type1 drivers to deal with the case where the lenIV field is set to -1 to indicate unencoded charstrings fixed some source code to prevent a compiler bug on IRIX fixed the module version's in the "type1z" driver

e82a82af

2000-06-22T00:26:11

small bugfix in the "seac" code

f0df85ba

2000-06-22T00:17:42

- MAJOR INTERNAL REDESIGN: A lot of internal modifications have been performed lately on the source in order to provide the following enhancements: - more generic module support: The FT_Module type is now defined to represent a handle to a given module. The file <freetype/ftmodule.h> contains the FT_Module_Class definition, as well as the module-loading public API The FT_Driver type is still defined, and still represents a pointer to a font driver. Note that FT_Add_Driver is replaced by FT_Add_Module, FT_Get_Driver by FT_Get_Module, etc.. - support for generic glyph image types: The FT_Renderer type is a pointer to a module used to perform various operations on glyph image. Each renderer is capable of handling images in a single format (e.g. ft_glyph_format_outline). Its functions are used to: - transform an glyph image - render a glyph image into a bitmap - return the control box (dimensions) of a given glyph image The scan converters "ftraster.c" and "ftgrays.c" have been moved to the new directory "src/renderer", and are used to provide two default renderer modules. One corresponds to the "standard" scan-converter, the other to the "smooth" one. The current renderer can be set through the new function FT_Set_Renderer. The old raster-related function FT_Set_Raster, FT_Get_Raster and FT_Set_Raster_Mode have now disappeared, in favor of the new: FT_Get_Renderer FT_Set_Renderer see the file <freetype/ftrender.h> for more details.. These changes were necessary to properly support different scalable formats in the future, like bi-color glyphs, etc.. - glyph loader object: A new internal object, called a 'glyph loader' has been introduced in the base layer. It is used by all scalable format font drivers to load glyphs and composites. This object has been created to reduce the code size of each driver, as each one of them basically re-implemented its functionality. See <freetype/internal/ftobjs.h> and the FT_GlyphLoader type for more information.. - FT_GlyphSlot had new fields: In order to support extended features (see below), the FT_GlyphSlot structure has a few new fields: linearHoriAdvance: this field gives the linearly scaled (i.e. scaled but unhinted) advance width for the glyph, expressed as a 16.16 fixed pixel value. This is useful to perform WYSIWYG text. linearVertAdvance: this field gives the linearly scaled advance height for the glyph (relevant in vertical glyph layouts only). This is useful to perform WYSIWYG text. Note that the two above field replace the removed "metrics2" field in the glyph slot. advance: this field is a vector that gives the transformed advance for the glyph. By default, it corresponds to the advance width, unless FT_LOAD_VERTICAL_LAYOUT was specified when calling FT_Load_Glyph or FT_Load_Char bitmap_left: this field gives the distance in integer pixels from the current pen position to the left-most pixel of a glyph image WHEN IT IS A BITMAP. It is only valid when the "format" field is set to "ft_glyph_format_bitmap", for example, after calling the new function FT_Render_Glyph. bitmap_top: this field gives the distance in integer pixels from the current pen position (located on the baseline) to the top-most pixel of the glyph image WHEN IT IS A BITMAP. Positive values correspond to upwards Y. loader: this is a new private field for the glyph slot. Client applications should not touch it.. - support for transforms and direct rendering in FT_Load_Glyph: Most of the functionality found in <freetype/ftglyph.h> has been moved to the core library. Hence, the following: - a transform can be specified for a face through FT_Set_Transform. this transform is applied by FT_Load_Glyph to scalable glyph images (i.e. NOT TO BITMAPS) before the function returns, unless the bit flag FT_LOAD_IGNORE_TRANSFORM was set in the load flags.. - once a glyph image has been loaded, it can be directly converted to a bitmap by using the new FT_Render_Glyph function. Note that this function takes the glyph image from the glyph slot, and converts it to a bitmap whose properties are returned in "face.glyph.bitmap", "face.glyph.bitmap_left" and "face.glyph.bitmap_top". The original native image might be lost after the conversion. - when using the new bit flag FT_LOAD_RENDER, the FT_Load_Glyph and FT_Load_Char functions will call FT_Render_Glyph automatically when needed.

9ca2af38

2000-06-21T03:03:28

A new formatting orgy. Added some `#if 0' to completely disable the CID AFM stuff. In case this is not correct please fix.

f9b8dec4

2000-06-16T19:34:52

major reformatting of the modules source code in order to get rid of most of the basic types redefinitions (i.e. FT_Int instead of "FT_Int", etc..) The format-specific prefixs like "TT_", "T1_", "T2_" & 'CID_" are now only used in relevant structures.. fixed Werner's fix to t2gload.c :-) other small bug fixes

3d99f796

2000-06-07T23:06:10

finally fixed that crazy Type 1 hinter.. it still sucks though .. ;-)

f5dcdd5c

2000-05-23T22:16:27

minor fix to the Type1 driver(s) to apply the font matrix when necessary..

e49ab25c

2000-05-16T23:44:38

formatting - removed trailing spaces

c30aea98

2000-05-12T15:01:18

another massive changes in order to completely avoid compiler warnings with GCC + "-ansi -pedantic -Wall -W" and LCC. Also fixed the compilation of "type1z" with Win32-LCC (its pre-processor is broken !!) Updated the BUILD document too

bfe2f98f

2000-05-12T12:17:15

a new massive grunt work. Redefined the EXPORT_DEF, EXPORT_FUNC, BASE_DEF and BASE_FUNC macros to let them take an argument.. This is needed to compile the library as a DLL on some platforms that have different compiler conventions..

efce08d6

2000-05-11T18:23:52

major re-organisation of the FreeType 2 directory hierarchy

82942cc2

2000-03-30T08:43:03

simple fix required by the auto-hinting module (sets the ft_outline_reverse_fill bit_flag)

ed7f62ac

2000-03-28T11:19:28

support for FT_LOAD_NO_RECURSE needed by the auto-hinter

7f615aef

2000-03-13T11:49:20

renamed all outlines functions to the FT_Outline_<action> syntax..

41dbcbf6

2000-03-09T11:46:25

reformatting, changing the FT_Outline structure: - "flags" have been renamed to "tags" - "outline_flags" have been renamed to "flags" Look for more re-formatting today..

0f99ddda

2000-03-06T13:23:32

changed the structure of FT_Outline in order to pack all outline flags in a single integer.. Changed the rest of the library and demo programs accordingly..

3188a3a1

2000-02-13T13:34:18

Sorry, forgot some changes needed to get rid of t1encode.[hc]. Here they come..

1ab77fdf

2000-02-10T18:08:17

some updates to make everything compile clean

51d4e28d

2000-02-10T13:11:43

New version of the Type 1 driver. Generates a Unicode charmap on the fly through the "psnames" module.. Now, we only need to support afm/pfm files (and maybe multiple masters) to call this driver finished !!

76bbd579

2000-01-27T13:35:16

the T1_Face definition changed slightly to clearly separate the Type 1 font content from the rest. This implied some changes to the following files.

d2b1f357

1999-12-16T23:11:37

Initial revision

kc3-lang/freetype/src/type1/t1gload.c

src/type1/t1gload.c

Log