Branch :
| Author | Commit | Date | CI | Message |
|---|---|---|---|---|
| 70a4a3ef | 2010-01-23 16:47:54 | Remove a needless include of rpc_compat.h Nothing in evrpc.c was using rpc_compat.h, so it's best to take it out, especially since it polluted our build process with GCC variadic macros. While we're at it, this patch puts an extra restriction on when the variadic macros in rpc_compat.h are defined. Not only must GCC be the compiler, but GCC must not be running in -ansi mode. | ||
| 5c7a7bca | 2010-01-23 20:07:05 | Fix windows and msvc build | ||
| c8c6a897 | 2010-01-16 15:24:58 | Minimize epoll_ctl calls by using changelist The logic here is a little complex, since epoll_add must used called exactly when no events were previously set, epoll_mod must be used when any events were previously set, and epoll_del only called when the removing all events. | ||
| 918e9c5e | 2010-01-23 16:38:36 | Fix a number of warnings from gcc -pedantic | ||
| e2ca403f | 2010-01-23 16:23:45 | Make it compile under gcc --std=c89. | ||
| ff3f6cd4 | 2010-01-22 16:14:49 | Check more internal event_add() calls for failure Most of these should be unable to fail, since adding a timeout generally always works. Still, it's better not to try to be "too smart for our own good here." There are some remaining event_add() calls that I didn't add checks for; I've marked those with "XXXX" comments. | ||
| 7296971b | 2009-12-29 16:38:03 | Detect setenv/unsetenv; skip main/base_environ test if we can't fake them. Previously, we assumed that we would have setenv/unsetenv everywhere but WIN32, where we could fake them with putenv. This isn't so: some other non-windows systems lack setenv/unsetenv, and some of them lack putenv too. The first part of the solution, then, is to detect setenv/unsetenv/ putenv from configure.in, and to fake setenv/unsetenv with putenv whenever we have the latter but not one of the former. But what should we do when we don't even have putenv? We could do elaborate tricks to manipulate the environ pointer, but since we're only doing this for the unit tests, let's just skip the one test in question that uses setenv/unsetenv. | ||
| 97a8c790 | 2010-01-22 00:34:21 | Fix compilation of rate-limit code when threading support is disabled | ||
| 26e1b6f2 | 2010-01-21 01:51:40 | Remove some commented-out code in evutil | ||
| 8d4aaf90 | 2010-01-20 12:56:54 | Don't use a bind address for nameservers on loopback If the user sets a bind address to use for nameservers, and a nameserver happens to be on 127.0.0.1, the nameserver will generally fail. This patch alters this behavior so that the bind address is only applied when the nameserver is on a non-loopback address. | ||
| 06839503 | 2010-01-19 14:01:36 | Functions to access more fields of struct event. Once event_assign() or event_new() had been called, there was no way to get at a copy of the event's callback, callback argument, or configured events. This patch adds an accessor function for each, and an all-fields accessor for code that wants to re-assign one field of an event. This patch also adds a function to return sizeof(struct event), so that code with intense RAM needs can still retain ABI compatibility between versions of Libevent without having to heap-allocate every struct event individually. The code here was first proposed by Pavel Pisa. | ||
| 70670067 | 2010-01-19 13:55:53 | Add a LICENSE file so people can find our license easily For what it's worth, we are aware that "Copyright $YEAR $NAME" is sufficient notice of copyright on software under US law and Internationally, and saying Copyright (c) $YEAR $NAME is a bit nutty. The character sequence (c) has never been ruled to have the same force in US law as the actual copyright symbol, and that neither of these US-specific symbols adds anything of value beyond saying "Copyright" since the Berne convention took effect in the US back in 1989. Similarly, saying "all rights reserved" doesn't do anything magical unless your software goes in a time-warp back to when the Buenos Aires Convention was the general rule. (And what will they run it on back then?) And what would even lead you to say "All Rights Reserved" when you're explicitly granting most of those rights to anybody receiving the work in accordance with the 3-clause BSD license? But still the FOSS community retains these ritual notations out of a kind of cargo-cult lawyering. Who knows? Perhaps one day, if we write our copyright notices ineptly enough, John Frum will come and give us a DFSG-compatible license that everybody can get behind. (Also, I am not a lawyer. The above should not be taken as legal advice. -- Nick) | ||
| 4b9f307d | 2010-01-15 10:26:25 | Add a forgotten header (changelist-internal.h) | ||
| 85464579 | 2010-01-14 23:28:16 | Merge commit 'niels/http_dns' | ||
| 78a50fe0 | 2010-01-14 17:39:54 | forgot to add void to test function | ||
| 26714ca1 | 2010-01-14 17:05:00 | add a test for evhttp_connection_base_new with a dns_base | ||
| b8226390 | 2010-01-14 16:53:25 | move dns utility functions into a separate file so that we can use them for http testing | ||
| 5032e526 | 2010-01-14 15:42:07 | do not use a function to assign the evdns base; instead assign it via evhttp_connection_base_new() which is a new function introduced in 2.0 | ||
| 3225dfb9 | 2010-01-14 17:04:08 | Remove kqueue->pend_changes. Since we're no longer writing directly to it from add/del, we don't need to worry about it changing as kq_dispatch releases the lock. We would make it a local variable, except that we wouldn't want to malloc and free it all the time. | ||
| 45e5ae37 | 2010-01-14 16:31:05 | Make kqueue use changelists. This fixes a bug in kqueue identified by Charles Kerr and various Transmission users, where adding and deleting an event in succession would make the event get reported, even if we didn't actually want to see it. Of course, this also makes the array of changes passed to kevent smaller, which could help performance. | ||
| 27308aae | 2010-01-14 16:30:40 | Changelist code to defer event changes until just before dispatch This is necessary or useful for a few reasons: 1) Sometimes applications will add and delete the same event more than once between calls to dispatch. Processing these changes immediately is needless, and potentially expensive (especially if we're on a system that makes one syscall per changed event). Yes, this actually happens in practice for nonpathological code, such as in cases where the user's callback conditionally re-adds a non-persistent event, or where draining a buffer turns off writing and invokes a user callback which adds more data which in turn re-enabled writing. 2) Sometimes we can coalesce multiple changes on the same fd into a single syscall if we know about them in advance. For example, epoll can do an add and a delete at the same time, but only if we have found out about both of them before we tell epoll. 3) Sometimes adding an event that we immediately delete can cause unintended consequences: in kqueue, this makes pending events get reported spuriously. | ||
| c698b77d | 2009-12-30 00:11:27 | Allow http connections to use evdns for hostname looksups. This was as simple as using bufferevent_connect_hostname instead of calling connect() ourself, which already knows how to use an evdns_base if it gets one. Untangling the bind code might be a little trickier. | ||
| a334b31c | 2010-01-14 14:46:16 | More unit tests for getaddrinfo_async: v4timeout and cancel. One covers the case where the v4 request times out but the v6 request doesn't. The other makes sure that cancelling a request actually works. | ||
| 94131e92 | 2010-01-12 15:58:36 | Fix test.sh on shells without echo -n Some systems have a version of /bin/sh whose builtin echo doesn't support the -n option used in test/test.sh. /bin/echo, however, usually does. This patch makes us use /bin/echo for echo -n whenever it is present. Also, our use of echo -n really only made sense when suppressing all test output. Since test output isn't suppressed when logging to a file, this pach makes us stop using echo -n when logging to a file. | ||
| b9f43b23 | 2010-01-11 20:47:36 | Add a comment on evthread_enable_lock_debuging. | ||
| 6cc79c6b | 2010-01-11 19:04:11 | Add unit-test for bad_request bug fixed in 1.4 recently. This is a partial forward-port from 4fd2dd9d83a000b6. There's no need to forward-port the bugfix, since the test passes with http.c as-is. I believe we fixed this while we were porting evhttp to bufferevent. --nickm | ||
| 510ab6bc | 2009-12-30 19:24:39 | Comestic changes in evconnlistener_new(), new_accepting_socket(), accepted_socket_invoke_user_cb() and iocp_listener_enable(). | ||
| fec66f96 | 2009-12-30 19:22:23 | Improved error handling in evconnlistener_new_async(). Also keeping the fd open because it is not opened by this function, so the caller is responsible for closing it. Additionally, since evconnlistener_new_bind() creates a socket and passes it to the function above, it required error checking to close the same socket. | ||
| 4367a33a | 2009-12-30 19:09:14 | Fixed a fd leak in start_accepting(), plus cosmetic changes | ||
| 2f33e00a | 2010-01-01 04:13:05 | Fixed a memory leak on windows threads implementation. The CRITICAL_SECTION was not being free'd in evthread_win32_lock_free(). | ||
| 66c02c78 | 2010-01-08 04:02:19 | Look at the proper /etc/hosts file on windows. This is harder than it might initially seem, since the proper filename depends on what the admin has decided to call the windows system directory, which for all we know might be Q:\tralfamidore\slartibartfast. And of course, this being windows, there are twelve ways to do it, where you can pick a nice one or a portable one, but not a really nice portable one. | ||
| 72dd6667 | 2009-12-07 17:21:41 | evdns_getaddrinfo() now supports the /etc/hosts file. The regular blocking evutil_getaddrinfo() already supported /etc/hosts by falling back to getaddrinfo() or gethostbyname(). But evdns_getaddrinfo() had no such facility. Now it does. The data structure here isn't very clever. I guess people with huge /etc/hosts files will either need to get out of the 1980s, or submit a patch to this code so that it uses a hashtable instead of a linked list. Includes basic unit tests. | ||
| 0f7144fd | 2009-12-07 17:21:13 | Refactor code from evdns into a new internal "read a file" function. | ||
| eaaf27f1 | 2010-01-06 18:41:46 | Enable branch-prediction hints with EVUTIL_UNLIKELY. This had been accidentally disabled. Since it seems to work with GCC, I'm turning it back on when GCC is present. | ||
| 29151e65 | 2010-01-06 18:42:59 | Fix byte counts when mixing deferred and non-deferred evbuffer callbacks. This patch finishes 390e0561, which was somehow committed in a half-finished state. It solves a failing unit test on windows. | ||
| ba2945f9 | 2010-01-06 17:59:44 | Merge branch 'ratelimit' Conflicts: bufferevent_async.c | ||
| 0546ce11 | 2009-12-30 05:03:54 | Eradicated the last free() call. Let mm_free() take care of deallocation. | ||
| 165d30e3 | 2009-12-30 14:29:56 | Fix compilation of rate-limiting code on win32. | ||
| 885b4273 | 2009-12-30 13:50:52 | Fix test-ratelim compilation on Linux. I'd forgotten to include time.h, and to link against libm. | ||
| 78ed0972 | 2009-12-30 11:58:36 | Never believe that we have pthreads on win32, even if gcc thinks we do. Apparently some newer versions of mingw provide a fake pthreads api to let applications work even if they don't know about windows threading. That's nice, but we aren't one of those. | ||
| 2e8eeea3 | 2009-12-29 19:50:03 | Fix crash bugs when a bufferevent's eventcb is not set. In many places throughout the code, we called _bufferevent_run_eventcb without checking whether the eventcb was actually set. This would work fine when the bufferevent's callbacks were deferred, but otherwise the code would segfault. Strangely, we always remembered to check before calling the _bufferevent_run_{read,write}cb functions. To prevent similar errors in the future, all of _buferevent_run_{read,write,event}cb now check to make sure the callback is actually set before invoking or deferring the callback. This patch also removes the now-redundant checks for {read,write}cb. | ||
| 0b151a9f | 2009-12-29 18:11:52 | Whitespace fixes in test.sh | ||
| 7dfbe94a | 2009-12-29 18:07:51 | Allow test.sh to be run as ./test/test.sh | ||
| c382de64 | 2009-12-29 17:59:55 | Allow the user to redirect the verbose output of test/test.sh to a file By default, the test.sh script still suppresses the output of all the tests it invokes. Now, however, you can have that output written to a file specified in the TEST_OUTPUT_FILE shell variable. | ||
| 1e56a32d | 2009-12-29 16:04:16 | Make the initial nameserver probe timeout configurable. When we decide that a nameserver is down, we stop sending queries to it, except to periodically probe it to see if it has come back up. Our previous probe sechedule was an ad-hoc and hard-wired "10 seconds, one minute, 5 minues, 15 minutes, 1 hour, 1 hour, 1 hour...". There was nothing wrong with having it be ad-hoc, but making it hard-wired served no good purpose. Now the user can set the initial timeout via a new "initial-probe-timeout:" option; future timeouts back off by a factor of 3 on every failure to a maximum of 1 hour. As a side-benefit, this lets us cut the runtime of the dns/retry test from about 40 seconds to about 3 seconds. Faster unit tests are always a good thing. | ||
| ee4953f8 | 2009-12-29 16:03:30 | Fix the code that allowed DNS options to not end with : We tried to fix this in 0.2.0.3-alpha, but our fix was buggy. | ||
| d0939d2b | 2009-12-29 16:21:26 | Introduced evutil_make_socket_closeonexec() to preserve fd flags for F_SETFD. Use this to eliminate the various macros that called F_SETFD throughout the code. | ||
| 4df7dbcb | 2009-12-29 16:19:24 | Adjusted fcntl() retval comparison on evutil_make_socket_nonblocking(). Apparently, a successful return value on F_SETFL is "anything but -1". | ||
| 82743794 | 2009-12-24 17:47:14 | Do not make bufferevent_setfd implicitly disable EV_READ and EV_WRITE. This obviates the need for BEV_SUSPEND_CONNECTING, and good riddance. | ||
| f0c0124e | 2009-12-23 07:54:13 | Testing code for bufferevent rate-limiting. This is not part of the regression tests, since running it necessarily takes a while. There is a new test-ratelim test; run it with '-h' for an argument to see its options. | ||
| 737c9cd8 | 2009-11-27 13:16:54 | Rate-limiting for bufferevents; group and individual limits are supported. The fairness algorithms are not the best, not every bufferevent type is supported, and some of the locking tricks here are simply absurd. Still, this code should be a good first step. | ||
| 47854a80 | 2009-12-28 01:40:37 | Expose our cached gettimeofday value with a new interface I've got a two use case that wants this for a fairly sensible purpose: one external and on internal. | ||
| 5a43df82 | 2009-12-28 16:03:47 | Improve readability of evutil_unparse_protoname() | ||
| 0d64051f | 2009-12-28 16:01:59 | Fix a bogus free in evutil_new_addrinfo() | ||
| 24fb502f | 2009-12-28 16:01:12 | Fix an fd leak in evconnlistener_new_bind(). | ||
| 4c8b7cdc | 2009-12-28 16:00:05 | Make evutil_make_socket_nonblocking() leave any other flags alone. Fixes bug 2922121 | ||
| fee2c779 | 2009-12-28 15:53:01 | Fix compilation of devpoll.c by adding missing thread includes. (Bug 2922156) | ||
| a47d88d7 | 2009-12-23 07:53:19 | Replace some cases of uint32_t with ev_uint32_t. Spotted by Roman Puls. | ||
| 4a5b5343 | 2009-12-23 07:48:43 | Do not ignore bufferevent_enable(EV_READ) before bufferevent_connect(). Previously, we weren't remembering that we wanted to re-add the read event once the connect was finished. Now we are. | ||
| 390e0561 | 2009-12-22 15:52:02 | Fix up behavior of never-defered callbacks a little | ||
| 5846bf6c | 2009-12-22 15:51:39 | Simplify the read high-watermark checking. | ||
| c69d5a5d | 2009-12-22 12:03:46 | Remove the contents of WIN32-Prj as unmaintained. Makefile.nmake is now the preferred way to build with MSVC; the project files haven't worked properly in ages. | ||
| 292467c0 | 2009-12-22 00:58:52 | Use evutil_socket_t, not int, when logging socket errors. | ||
| c51bb3c3 | 2009-12-21 16:36:40 | Fix a few locking issues on windows. | ||
| 5a112d3c | 2009-12-18 23:37:50 | Set all instances of the version number correctly. Note that we've made two subtle mistakes: we are supposed to suffix any non-released version with "-dev", and we're supposed to use the last byte of the numeric version to indicate whether we have done this. For example, when 2.0.4-alpha is released, its numeric versin will be 0x 02 00 04 00. As soon as we tag it, we will change the version in the git repository to 2.0.4-alpha-dev, whose numeric version will be 0x 02 00 04 01 or something. | ||
| 67995270 | 2009-12-18 17:04:37 | Drop install-sh from our git repo: a mismatched version could break "make dist" | ||
| a773df54 | 2009-12-18 16:24:41 | Fix a segfault when freeing SSL bufferevents in an unusual order Have container bufferevents hold a reference to their underlying bufferevents. (Commit message and minor revisions by nickm.) | ||
| a6adeca7 | 2009-12-17 12:38:46 | Fix a segfault when writing a very fragmented evbuffer onto an SSL Fixes bug 2916328. | ||
| f6430ac1 | 2009-12-08 17:02:24 | Update sample/signal-test.c to use newer APIs and not leak. | ||
| ea6b1df2 | 2009-12-08 15:38:34 | Only define _GNU_SOURCE if it is not already defined. | ||
| 70cdfe49 | 2009-12-06 02:59:19 | Fix compile on Snow Leopard with gcc warnings enabled | ||
| 7ae94450 | 2009-12-04 16:37:43 | Fix a snow leopard compile warning in the unit tests. Reported by Sebastian Hahn. | ||
| 0d744aa1 | 2009-11-23 18:34:32 | Refactor our 'suspend operation' logic on bufferevents. There are lots of things we do internally in bufferevents to indicate "the user would like this operation to happen, but we aren't going to try until some other condition goes away." Our logic here has gotten entirely too complicated. This patch tries to fix that by adding the idea of 'suspend flags' for read and write. To say "don't bother reading or writing until condition X no longer holds," bufferevent_suspend_read/write(bev, BEV_SUSPEND_X). When X no longer holds, call bufferevent_unsuspend_read/write(bev, BEV_SUSPEND_X). Right now, only the read-watermark logic uses this. | ||
| 438f9ed2 | 2009-11-23 15:53:24 | Add the abilitity to mark some buffer callbacks as never-deferred. | ||
| 689fc091 | 2009-11-28 11:31:39 | New EVTHREAD_TRY_LOCK function to try to grab a lock. | ||
| 2b7abf03 | 2009-12-04 13:49:27 | Merge commit 'niels/dnscrash' | ||
| 6c7c5799 | 2009-12-04 10:44:46 | Fix a crash when reading badly formatted resolve.conf; from Yasuoka Masahiko | ||
| b62d979b | 2009-12-02 01:24:37 | Update nmake makefile to build evthread.c | ||
| 31687b4d | 2009-12-02 01:22:07 | Fix regress_iocp.c usage of old lock allocation macros. | ||
| bd6f1bab | 2009-12-02 01:15:15 | Fix up evthread compilation on windows | ||
| 56771a3e | 2009-11-29 10:20:46 | Valgrind fix: Clear struct kevent before checking for OSX bug. William's original commit message: Valgrind complains on startup because kq_init passes to kevent only a partially initialized structure. The code doesn't expect kevent to look at .fflags, .udata, or .data, I suppose, because it merely tickles the kernel looking for an error response. But perhaps that's unwarranted chuminess (notwithstanding that it's checking for an OS X bug), and needless noise nonetheless. | ||
| 0cd3bb9f | 2009-11-27 17:22:19 | Improved optional lock debugging. There were a couple of places in the code where we manually kept lock counts to make sure we never accessed resources without holding a lock, and that we never released a lock we didn't have. The lock-debugging code already puts counts on _every_ lock when lock debugging is enabled, so there is no need to keep these counts around otherwise. This patch rewrites the ASSERT_FOO_LOCKED macros to all use a common EVLOCK_ASSERT_LOCKED(). We also teach the lock debugging code to keep track of who exactly holds each lock, so that EVLOCK_ASSERT_LOCKED() means "locked by this thread." | ||
| 2df1f82b | 2009-11-27 16:02:49 | Fix an evdns lock violation. Original message: evdns contains a bug related to thread lock. enable thread lock by evthread_use_pthreads() will cause successive evdns_base_resolve_ipv4() (and other resolve functions i think) to hang on EVDNS_LOCK(base) after one or several successful call to evdns_base_resolve_ipv4(). | ||
| da1718b2 | 2009-11-27 16:00:59 | Fix a locking bug in event_base_loop() We previously were releasing the lock when we exited the main loop in some ways, but not in others. | ||
| d84d8385 | 2009-11-27 15:24:32 | Fix two use-after-free bugs in unit tests spoted by lock debugging | ||
| 76cd2b70 | 2009-11-27 16:44:47 | Stop passing EVTHREAD_READ and EVTHREAD_WRITE to non-rw locks. Previously, our default lock model kind of assumed that every lock was potentially a read-write lock. This was a poor choice, since read-write locks are far more expensive than regular locks, and so the lock API should only use them when we can actually take advantage of them. Neither our pthreads or win32 lock implementation provided rw locks. Now that we have a way (not currently used!) to indicate that we really want a read-write lock, we shouldn't actually say "lock this for reading" or "lock this for writing" unless we mean it. | ||
| 347952ff | 2009-11-27 15:20:43 | Revise the locking API: deprecate the old locking callbacks and add trylock. Previously, there was no good way to request different kinds of lock (say, read/write vs writeonly or recursive vs nonrecursive), or for a lock function to signal failure (which would be important for a trylock mode). This patch revises the lock API to be a bit more useful. The older lock calls are still supported for now. We also add a debugging mode to catch common errors in using the locking APIs. | ||
| e1ffbb82 | 2009-11-21 01:11:49 | Fix memory-leak of signal handler array with kqueue. It turns out that kqueue_dealloc wasn't calling evsig_dealloc() (because it doesn't use the main signal handler logic) so the sh_old array was leaking. This patch also introduces a fix in evsig_dealloc() where we set the sh_old array to NULL when we free it, so that main/fork can pass. | ||
| 07e9e9b4 | 2009-11-20 16:50:55 | Parenthesize macro arguments more aggressively | ||
| f32b5750 | 2009-11-20 16:38:01 | Add a warning about the use of event_initialized. | ||
| 91fe23fc | 2009-11-20 15:46:04 | Tolerate code that returns from a fatal_cb. Also, replace more abort() calls with EVUTIL_ASSERT() or event_errx. | ||
| 94d00651 | 2009-11-20 12:56:29 | Add stub header for 2.0.4-alpha changelog. | ||
| 0af10d56 | 2009-11-20 12:46:00 | Add more people who wrote patches to the acknowledgments The names came from grepping ChangeLog for 'patch/code from/by'. | ||
| 0b427268 | 2009-11-20 12:37:47 | Improve the README with more information and links. (Also, try to test out the new commit script.) | ||
| ba340714 | 2009-11-20 12:17:14 | Add a .gitignore file. .gitignore plays the same role in Git as the svn:ignore property does in subversion. | ||
| 505040a2 | 2009-11-20 00:18:35 | call it 2.0.3-alpha svn:r1556 | ||
| f1691539 | 2009-11-19 23:08:50 | Remove most calls to event_err() in http and deal with memory errors instead svn:r1555 | ||
| 986500de | 2009-11-19 22:02:33 | nick found a race condition in the pthreads test case svn:r1554 | ||
| b8f222e0 | 2009-11-19 21:14:31 | On FreeBSD and other OSes, connect can return ECONREFUSED immediately; instead of failing the function call, pretend with faileld in the callback. svn:r1553 | ||
| bdfe72f3 | 2009-11-19 00:21:48 | Documentation adjustments svn:r1552 |