|
fbe5007f
|
2015-12-19T14:29:46
|
|
Merge branch '1.4.x'
|
|
|
71e971fb
|
2015-12-19T14:18:21
|
|
Build: Use FILEPATH type for NASM CMake variable
This causes cmake-gui to to display the proper file chooser dialog
(as opposed to the directory chooser.)
Fixes #40
|
|
|
d70a5c12
|
2015-12-14T16:59:43
|
|
Remove unnecessary .arch directive in ARM64 code
This directive was preventing the code from assembling using the
integrated assembler in clang.
Fixes #33
|
|
|
1e32fe31
|
2015-10-14T17:32:39
|
|
Replace INT32 with a new internal datatype (JLONG)
These days, INT32 is a commonly-defined datatype in system headers. We
cannot eliminate the definition of that datatype from jmorecfg.h, since
the INT32 typedef has technically been part of the libjpeg API since
version 5 (1994.) However, using INT32 internally is risky, because the
inclusion of a particular header (Xmd.h, for instance) could change the
definition of INT32 from long to int on 64-bit platforms and thus change
the internal behavior of libjpeg-turbo in unexpected ways (for instance,
failing to correctly set __INT32_IS_ACTUALLY_LONG to match the INT32
typedef-- perhaps as a result of including the wrong version of
jpeglib.h-- could cause libjpeg-turbo to produce incorrect results.)
The library has always been built in environments in which INT32 is
effectively long (on Windows, long is always 32-bit, so effectively it's
the same as int), so it makes sense to turn INT32 into an explicitly
long datatype. This ensures that libjpeg-turbo will always behave
consistently, regardless of the headers included at compile time.
Addresses a concern expressed in #26.
|
|
|
7e3acc0e
|
2015-10-10T10:25:46
|
|
Rename README, LICENSE, BUILDING text files
The IJG README file has been renamed to README.ijg, in order to avoid
confusion (many people were assuming that that was our project's README
file and weren't reading README-turbo.txt) and to lay the groundwork for
markdown versions of the libjpeg-turbo README and build instructions.
|
|
|
b961f0bf
|
2015-09-16T23:16:38
|
|
Merge branch '1.4.x'
|
|
54792ba3
|
2015-09-16T23:05:46
|
|
Fix MIPS DSPr2 4:2:0 upsample bug w/ small images
The DSPr2 code was errantly comparing the residual (t9, width & 0xF)
with the end pointer (t4, out + width) instead of the width directly
(a1). This would give the wrong results with any image whose output
width was less than 16. The other small changes (ulw to lw and removal
of the nop) are just some easy optimizations around this code.
This issue caused a buffer overrun and subsequent segfault on images
whose scaled output height was 1 pixel and whose scaled output width was
< 16 pixels. Note that the "plain" (non-fancy and non-merged) upsample
routine, which was affected by this bug, is normally not used except
when decompressing a non-YCbCr JPEG image, but it is also used when
decompressing a single-row image (because the other upsampling
algorithms require at least two rows.)
Closes #16.
|
|
498d9bc9
|
2015-09-15T11:57:03
|
|
Fix x86-64 ABI conformance issue in SIMD code
(descriptions cribbed by DRC from discussion in #20)
In the x86-64 ABI, the high (unused) DWORD of a 32-bit argument's
register is undefined, so it was incorrect to use a 64-bit mov
instruction to transfer a JDIMENSION argument in the 64-bit SSE2 SIMD
functions. The code worked thus far only because the existing compiler
optimizers weren't smart enough to do anything else with the register in
question, so the upper 32 bits happened to be all zeroes-- for the past
6 years, on every x86-64 compiler previously known to mankind.
The bleeding-edge Clang/LLVM compiler has a smarter optimizer, and
under certain circumstances, it will attempt to load-combine adjacent
32-bit integers from one of the libjpeg structures into a single 64-bit
integer and pass that 64-bit integer as a 32-bit argument to one of the
SIMD functions (which is allowed by the ABI, since the upper 32 bits of
the 32-bit argument's register are undefined.) This caused the
libjpeg-turbo regression tests to crash.
Also enhance the documentation of JDIMENSION to explain that its size
is significant to the implementation of the SIMD code.
Closes #20. Refer also to http://crbug.com/532214.
|
|
|
f62dbccf
|
2015-08-15T13:30:14
|
|
Fix build error when compiling MIPS SIMD w/ -mfpxx
When compiled with -mfpxx (which is now the default on Debian), there are
some restrictions on the use of odd-numbered FP registers. More details
about FPXX can be found here:
https://dmz-portal.mips.com/wiki/MIPS_O32_ABI_-_FR0_and_FR1_Interlinking
This commit simply changes all uses of FP registers to an even-numbered
equivalent like this:
f0 -> f0
f1 -> f2
f2 -> f4
...
f8 -> f16
This commit should have no observable effect except that the MIPS assembly
will now compile with -mfpxx.
Closes #11
|
|
691cd933
|
2015-06-20T16:36:32
|
|
Fix 'make dist'
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1574 632fc199-4ca6-4c93-a231-07263d6284db
|
|
|
89b5e06d
|
2015-06-20T16:20:53
|
|
Studies show that GCC v5.1.0 performs as well as or better than v4.2, but v4.7.x-v4.9.x do not perform as well as v4.2.
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1571 632fc199-4ca6-4c93-a231-07263d6284db
|
|
|
eea64245
|
2015-06-20T15:51:34
|
|
Typo
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.4.x@1570 632fc199-4ca6-4c93-a231-07263d6284db
|
|
|
f15ef337
|
2015-06-08T17:41:34
|
|
Fix a segfault that occured in the MIPS DSPr2 fancy upsampling routine when downsampled_width==3. Because the DSPr2 code unrolls the loop for the middle columns (refer to jdsample.c), it has the effect of performing two column iterations, and that only works properly if the number of columns (minus the first and last) is >= 2. For the specific case of downsampled_width==3, this patch skips to the second iteration of the unrolled column loop.
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.4.x@1562 632fc199-4ca6-4c93-a231-07263d6284db
|
|
|
3b7015d5
|
2015-02-23T19:03:29
|
|
Enable silent build rules for the NASM objects, if the source is configured with automake 1.11 or later. NOTE: the build still spits out "error: ignoring unknown tag NASM" for each object, but unfortunately, if we remove "--tag NASM" from the command line, the build breaks under older versions of automake (it aborts with "unable to infer tagged configuration.")
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.4.x@1534 632fc199-4ca6-4c93-a231-07263d6284db
|
|
|
771ab194
|
2015-02-20T19:57:21
|
|
Extend the AltiVec VMX SIMD routines to support little endian PowerPC platforms.
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1529 632fc199-4ca6-4c93-a231-07263d6284db
|
|
|
3f760834
|
2015-01-28T00:25:43
|
|
Come on, Cohaagen, you got what you want. Give these people air!
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1527 632fc199-4ca6-4c93-a231-07263d6284db
|
|
|
8b5a0093
|
2015-01-21T17:42:28
|
|
Oops. The MIPS SIMD implementations of h2v1 and h2v2 upsampling were not checking for DSPr2 support, so running 'djpeg -nosmooth' on a non-DSPr2-enabled platform caused an "illegal instruction" error.
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.4.x@1523 632fc199-4ca6-4c93-a231-07263d6284db
|
|
|
246b01bb
|
2015-01-16T03:13:16
|
|
Revert r1506 (we actually are generating columns with the IDCT, so the naming makes sense in retrospect); further de-confusification in the forward DCT
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1507 632fc199-4ca6-4c93-a231-07263d6284db
|
|
|
c4e3c361
|
2015-01-15T08:51:31
|
|
De-confusify the variable names a bit -- "out" represents the output of the IDCT kernel, so use "final" to represent the packed data that will be stored to memory.
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1506 632fc199-4ca6-4c93-a231-07263d6284db
|
|
|
c641cddb
|
2015-01-14T15:41:11
|
|
AltiVec SIMD implementation of H2V1 and H2V2 plain upsampling (used only when decompressing YCCK images with fast upsampling enabled.)
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1504 632fc199-4ca6-4c93-a231-07263d6284db
|
|
|
86af36ae
|
2015-01-14T13:27:32
|
|
AltiVec SIMD implementation of H2V1 and H2V2 merged upsampling
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1503 632fc199-4ca6-4c93-a231-07263d6284db
|
|
|
11c4010c
|
2015-01-14T13:07:06
|
|
Fix an overread detected by valgrind
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1502 632fc199-4ca6-4c93-a231-07263d6284db
|
|
|
2517ef72
|
2015-01-14T10:45:31
|
|
Fix bugs in the AltiVec fancy upsampling routines uncovered during additional testing with small image sizes. Since the input width is half the output width, the upsampler should only write a second 16-byte chuck if there are more than 8 input columns left. Additionally, if the width is < 16, then we need to insert a dummy sample (the SSE2 code does this as well, but I neglected to port that portion of the code for some reason.)
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1501 632fc199-4ca6-4c93-a231-07263d6284db
|
|
|
cbcb5361
|
2015-01-14T08:31:54
|
|
Fix a bug in the AltiVec downsampling routines uncovered during additional testing with small image sizes. Since the output width is half the input width, the downsampler should only read a second 16-byte chunk if there are more than 8 output columns left.
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1499 632fc199-4ca6-4c93-a231-07263d6284db
|
|
|
ada430bb
|
2015-01-13T11:49:15
|
|
Make the formatting and naming of variables and constants more consistent
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1498 632fc199-4ca6-4c93-a231-07263d6284db
|
|
|
406bb01c
|
2015-01-13T11:47:20
|
|
Make the formatting and naming of variables and constants more consistent
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1497 632fc199-4ca6-4c93-a231-07263d6284db
|
|
|
a6a24c27
|
2015-01-13T10:00:12
|
|
Make the formatting and naming of variables and constants more consistent
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1496 632fc199-4ca6-4c93-a231-07263d6284db
|
|
|
52a4ec6c
|
2015-01-13T09:02:29
|
|
AltiVec SIMD implementation of H2V1 and H2V2 fancy upsampling
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1495 632fc199-4ca6-4c93-a231-07263d6284db
|
|
|
51eba060
|
2015-01-11T07:38:35
|
|
Minor code readability tweak
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1492 632fc199-4ca6-4c93-a231-07263d6284db
|
|
|
d71a6e0c
|
2015-01-11T06:34:47
|
|
Use intrinsics for loading aligned data in the IDCT functions. This has no effect on performance, but it makes it more obvious what that code is doing.
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1491 632fc199-4ca6-4c93-a231-07263d6284db
|
|
|
ac4daa77
|
2015-01-10T22:56:26
|
|
AltiVec SIMD implementation of YCC-to-RGB color conversion
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1489 632fc199-4ca6-4c93-a231-07263d6284db
|
|
|
af69295d
|
2015-01-10T12:25:42
|
|
Fix minor issue in code comments
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1488 632fc199-4ca6-4c93-a231-07263d6284db
|
|
|
6aed1129
|
2015-01-10T12:10:08
|
|
Fix minor issue in code comments
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1487 632fc199-4ca6-4c93-a231-07263d6284db
|
|
|
a5005751
|
2015-01-10T12:09:11
|
|
Simplify the code somewhat. It actually wasn't necessary to have a "fast path" and a "medium path"-- they perform the same.
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1486 632fc199-4ca6-4c93-a231-07263d6284db
|
|
|
25347882
|
2015-01-10T11:32:36
|
|
Overhaul the AltiVec vector loading code in the compression-side colorspace conversion routines. The existing code was sometimes overreading the source buffer (at least according to valgrind), and it was necessary to increase the complexity of the code in order to prevent this without significantly compromising performance.
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1485 632fc199-4ca6-4c93-a231-07263d6284db
|
|
|
8de75d0f
|
2015-01-08T10:42:54
|
|
Fix minor issue in code comments
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1484 632fc199-4ca6-4c93-a231-07263d6284db
|
|
|
22048207
|
2015-01-08T06:18:33
|
|
AltiVec SIMD implementation of 2x1 and 2x2 downsampling
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1483 632fc199-4ca6-4c93-a231-07263d6284db
|
|
|
577ecd93
|
2014-12-23T04:14:54
|
|
AltiVec SIMD implementation of sample conversion and integer quantization
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1474 632fc199-4ca6-4c93-a231-07263d6284db
|
|
|
ff30c639
|
2014-12-23T02:42:59
|
|
Document the fact that the AltiVec implementation uses the same modified algorithms as the SSE2 implementation
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1473 632fc199-4ca6-4c93-a231-07263d6284db
|
|
|
45453085
|
2014-12-22T16:04:17
|
|
Use intrinsics for loading/storing data in the DCT/IDCT functions. This has no effect on the performance of the aligned loads/stores, but it makes it more obvious what that code is doing. Using intrinsics for the unaligned stores in the inverse DCT functions increases overall decompression performance by 1-2%.
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1472 632fc199-4ca6-4c93-a231-07263d6284db
|
|
|
b1fec4ff
|
2014-12-22T14:10:33
|
|
AltiVec SIMD implementation of RGB-to-Grayscale color conversion
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1471 632fc199-4ca6-4c93-a231-07263d6284db
|
|
|
5976e425
|
2014-12-22T13:57:30
|
|
Remove unneeded code; Make sure jccolor-altivec.o will be rebuilt if jccolext-altivec.c changes.
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1470 632fc199-4ca6-4c93-a231-07263d6284db
|
|
|
62bae204
|
2014-12-22T13:42:26
|
|
AltiVec SIMD implementation of RGB-to-YCC color conversion
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1469 632fc199-4ca6-4c93-a231-07263d6284db
|
|
|
13af1396
|
2014-12-22T01:38:01
|
|
Make comments more consistent
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1466 632fc199-4ca6-4c93-a231-07263d6284db
|
|
|
bf8a5feb
|
2014-12-22T01:10:11
|
|
Cosmetic tweaks to the PowerPC SIMD stubs
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1464 632fc199-4ca6-4c93-a231-07263d6284db
|
|
|
535674b1
|
2014-12-22T01:00:42
|
|
Split AltiVec algorithms into separate files for ease of maintenance; Rename constants using lowercase so they are not confused with macros
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1463 632fc199-4ca6-4c93-a231-07263d6284db
|
|
|
c9da7852
|
2014-12-20T03:32:59
|
|
Optimizations to the AltiVec DCT algorithms (pre-compute constants and combine multiply/add operations)
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1462 632fc199-4ca6-4c93-a231-07263d6284db
|
|
|
0691162a
|
2014-12-20T01:17:39
|
|
AltiVec SIMD implementation of slow integer inverse DCT
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1461 632fc199-4ca6-4c93-a231-07263d6284db
|
|
|
9cb418d2
|
2014-12-20T01:16:26
|
|
Use macros to allocate constants statically, rather than reading them from a table using vec_splat*(). This improves code readability and probably improves performance a bit as well.
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1460 632fc199-4ca6-4c93-a231-07263d6284db
|
|
|
935d1d63
|
2014-12-20T01:14:38
|
|
Swap the order of the IFAST and ISLOW FDCT functions so that it matches the order of the prototypes in jsimd.h and the stubs in jsimd_powerpc.c.
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1459 632fc199-4ca6-4c93-a231-07263d6284db
|
|
|
86ae5913
|
2014-12-19T18:28:00
|
|
Include ARMv8 binaries when generating a combined OS X/iOS package using 'make iosdmg'
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1458 632fc199-4ca6-4c93-a231-07263d6284db
|
|
|
62999d77
|
2014-12-19T15:36:39
|
|
Modify the ARM64 assembly file so that it uses only syntax that the clang assembler in XCode 5.x can understand. These changes should all be cosmetic in nature-- they do not change the meaning or readability of the code nor the ability to build it for Linux. Actually, the code is now more in compliance with the ARM64 programming manual. In addition to these changes, there were a couple of instructions that clang simply doesn't support, so gas-preprocessor.pl was modified so that it now converts those into equivalent instructions that clang can handle.
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.4.x@1450 632fc199-4ca6-4c93-a231-07263d6284db
|
|
|
6cb7f40a
|
2014-12-18T10:12:29
|
|
AltiVec SIMD implementation of fast integer inverse DCT
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1445 632fc199-4ca6-4c93-a231-07263d6284db
|
|
|
040435af
|
2014-12-18T09:49:39
|
|
Further cleanup of the AltiVec forward DCT code:
-- Use macros to represent the fast FDCT constants, to facilitate comparing the AltiVec implementation of the algorithm with the SSE2 implementation.
-- Rename slow FDCT constants for consistency.
-- Use vec_sra() in all cases in the slow FDCT code. The SSE2 implementation uses psraw, which is an arithmetic shift, so we need to do likewise with AltiVec. Using vec_sr() hasn't caused any problems yet, but it is conceivable that it might cause different behavior in certain corner cases.
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1444 632fc199-4ca6-4c93-a231-07263d6284db
|
|
|
fb0c3940
|
2014-12-17T08:04:39
|
|
AltiVec SIMD implementation of slow integer forward DCT; Clean up fast integer forward DCT code so that it is easier to see how it derives from the SSE2 code and to make it play more nicely with the slow FDCT code.
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1443 632fc199-4ca6-4c93-a231-07263d6284db
|
|
|
e1ac4010
|
2014-12-17T08:00:29
|
|
Fix cosmetic issues in AltiVec comments
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1442 632fc199-4ca6-4c93-a231-07263d6284db
|
|
|
7affbfc2
|
2014-09-05T07:23:12
|
|
The AltiVec code actually works on 32-bit PowerPC platforms as well, so change the "powerpc64" token to "powerpc". Also clean up the shift code, which wasn't building properly on OS X.
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1406 632fc199-4ca6-4c93-a231-07263d6284db
|
|
|
cd2d8e1c
|
2014-09-05T06:33:42
|
|
AltiVec SIMD implementation of fast forward DCT
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1405 632fc199-4ca6-4c93-a231-07263d6284db
|
|
|
0a9a2526
|
2014-08-29T01:53:17
|
|
Rename the ARM64 assembly file to match the C file
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1390 632fc199-4ca6-4c93-a231-07263d6284db
|
|
|
de26249a
|
2014-08-29T01:49:59
|
|
Fix several mathematical issues discovered in the ARM64 NEON code while running the extended regression tests introduced in r1267. Specific comments can be found in the original patches:
https://sourceforge.net/p/libjpeg-turbo/patches/64/
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1389 632fc199-4ca6-4c93-a231-07263d6284db
|
|
|
a6efae14
|
2014-08-25T15:26:09
|
|
Reformat code per Siarhei's original patch (to clearly indicate that the offset instructions are completely independent) and add Siarhei as an individual author (he no longer works for Nokia.)
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1388 632fc199-4ca6-4c93-a231-07263d6284db
|
|
|
bdc7650b
|
2014-08-23T15:57:38
|
|
ARM64 NEON SIMD support for YCC-to-RGB565 conversion
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1386 632fc199-4ca6-4c93-a231-07263d6284db
|
|
|
d729f4da
|
2014-08-23T15:47:51
|
|
ARM NEON SIMD support for YCC-to-RGB565 conversion, and optimizations to the existing YCC-to-RGB conversion code:
-----
https://github.com/ssvb/libjpeg-turbo/commit/aee36252be20054afce371a92406fc66ba6627b5.patch
From aee36252be20054afce371a92406fc66ba6627b5 Mon Sep 17 00:00:00 2001
From: Siarhei Siamashka <siarhei.siamashka@gmail.com>
Date: Wed, 13 Aug 2014 03:50:22 +0300
Subject: [PATCH] ARM: Faster NEON yuv->rgb conversion for Krait and Cortex-A15
The older code was developed and tested only on ARM Cortex-A8 and ARM Cortex-A9.
Tuning it for newer ARM processors can introduce some speed-up (up to 20%).
The performance of the inner loop (conversion of 8 pixels) improves from
~27 cycles down to ~22 cycles on Qualcomm Krait 300, and from ~20 cycles
down to ~18 cycles on ARM Cortex-A15.
The performance remains exactly the same on ARM Cortex-A7 (~58 cycles),
ARM Cortex-A8 (~25 cycles) and ARM Cortex-A9 (~30 cycles) processors.
Also use larger indentation in the source code for separating two independent
instruction streams.
-----
https://github.com/ssvb/libjpeg-turbo/commit/a5efdbf22ce9c1acd4b14a353cec863c2c57557e.patch
From a5efdbf22ce9c1acd4b14a353cec863c2c57557e Mon Sep 17 00:00:00 2001
From: Siarhei Siamashka <siarhei.siamashka@gmail.com>
Date: Wed, 13 Aug 2014 07:23:09 +0300
Subject: [PATCH] ARM: NEON optimized yuv->rgb565 conversion
The performance of the inner loop (conversion of 8 pixels):
* ARM Cortex-A7: ~55 cycles
* ARM Cortex-A8: ~28 cycles
* ARM Cortex-A9: ~32 cycles
* ARM Cortex-A15: ~20 cycles
* Qualcomm Krait: ~24 cycles
Based on the Linaro rgb565 patch from
https://sourceforge.net/p/libjpeg-turbo/patches/24/
but implements better instructions scheduling.
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1385 632fc199-4ca6-4c93-a231-07263d6284db
|
|
|
55e328ec
|
2014-08-22T18:30:44
|
|
Revert r1335 and r1336. It was a valiant effort, but on Windows, xmm8-xmm15 are non-volatile, and the overhead of pushing them onto the stack at the beginning of each function and popping them at the end was causing worse performance (in the neighborhood of 3-5%) than just using the work areas and limiting the register usage to xmm0-xmm7. Best to leave the SSE2 code alone. We can optimize the register usage for AVX2, once that port takes place.
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1382 632fc199-4ca6-4c93-a231-07263d6284db
|
|
|
2e2ce5a1
|
2014-08-22T11:31:46
|
|
.func/.endfunc are only necessary when generating STABS debug info, which basically went out of style with parachute pants and Rick Astley. At any rate, none of the platforms for which we're building the ARM code use it (DWARF is the common format these days), and the .func/.endfunc directives cause the clang integrated assembler to fail (http://llvm.org/bugs/show_bug.cgi?id=20424).
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1375 632fc199-4ca6-4c93-a231-07263d6284db
|
|
|
8a74848a
|
2014-08-09T22:58:18
|
|
Oops. The Windows version of collect_args/uncollect_args uses rsp, so we still need the rsp prologue/epilogue, despite the fact that we aren't using the stack as a work area. This fixes a segfault on Windows caused by r1335.
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1336 632fc199-4ca6-4c93-a231-07263d6284db
|
|
|
a8ab3424
|
2014-08-09T14:30:28
|
|
Attempt to improve performance by refactoring the compression-side color conversion and DCT algorithms so that they take full advantage of the additional registers available with 64-bit SSE2. This produces a somewhat yawn-worthy speedup of 2-3%, but at least the code is a lot more readable now.
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1335 632fc199-4ca6-4c93-a231-07263d6284db
|
|
|
3728aa01
|
2014-07-23T14:14:14
|
|
Fix performance and other issues uncovered in testing with actual ARM64 hardware; formatting tweaks; remove NEON platform check (NEON is always available with ARMv8)
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1333 632fc199-4ca6-4c93-a231-07263d6284db
|
|
|
2472bc71
|
2014-06-22T21:14:39
|
|
Add proper support for Borland compilers (Borland needs section names to be prefixed with an underscore, and it needs OMF object files.)
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1328 632fc199-4ca6-4c93-a231-07263d6284db
|
|
|
495e4342
|
2014-05-19T19:13:22
|
|
Allow for building the MIPS DSPr2 extensions if the host is mips-* as well as mipsel-*. The DSPr2 extensions are little endian, so we still have to check that the compiler defines __MIPSEL__ before enabling them. This paves the way for supporting big-endian MIPS, and in the near term, it allows the SIMD extensions to be built with Sourcery CodeBench.
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1316 632fc199-4ca6-4c93-a231-07263d6284db
|
|
|
5ef46305
|
2014-05-18T20:04:47
|
|
SIMD-accelerated int upsample routine for MIPS DSPr2
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1315 632fc199-4ca6-4c93-a231-07263d6284db
|
|
|
c728cfd8
|
2014-05-18T19:36:05
|
|
Fix MIPS build
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1314 632fc199-4ca6-4c93-a231-07263d6284db
|
|
|
5033f3e1
|
2014-05-18T18:33:44
|
|
Remove MS-DOS code and information, and adjust copyright headers to reflect the removal of features in r1307 and r1308. libjpeg-turbo has never supported MS-DOS, nor is it even possible for us to do so.
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1312 632fc199-4ca6-4c93-a231-07263d6284db
|
|
|
bc56b754
|
2014-05-16T10:43:44
|
|
Get rid of the HAVE_PROTOTYPES configuration option, as well as the related JMETHOD and JPP macros. libjpeg-turbo has never supported compilers that don't handle prototypes. Doing so requires ansi2knr, which isn't even supported in the IJG code anymore.
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1308 632fc199-4ca6-4c93-a231-07263d6284db
|
|
|
52ded876
|
2014-05-15T20:30:16
|
|
Remove all of the NEED_SHORT_EXTERNAL_NAMES stuff. There is scant information available as to which linkers ever had a 15-character global symbol name limit. AFAICT, it might have been a VMS and/or a.out BSD thing, but none of those platforms have ever been supported by libjpeg-turbo (nor are such systems supported by other open source libraries of this nature.)
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1307 632fc199-4ca6-4c93-a231-07263d6284db
|
|
|
64086281
|
2014-05-15T19:46:48
|
|
Clean up code formatting in the SIMD interface functions
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1306 632fc199-4ca6-4c93-a231-07263d6284db
|
|
|
1419852c
|
2014-05-15T19:45:11
|
|
Clean up code formatting in the SIMD interface functions
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1305 632fc199-4ca6-4c93-a231-07263d6284db
|
|
|
1b3fd7ee
|
2014-05-15T18:26:01
|
|
SIMD-accelerated NULL convert routine for MIPS DSPr2
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1304 632fc199-4ca6-4c93-a231-07263d6284db
|
|
|
0bf325b8
|
2014-05-15T17:10:39
|
|
Fix error in MIPS DSPr2 accelerated smooth downsample routine
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1302 632fc199-4ca6-4c93-a231-07263d6284db
|
|
|
6a61c1e6
|
2014-05-14T15:00:10
|
|
SIMD-accelerated h2v2 smooth downsampling routine for MIPS DSPr2
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1301 632fc199-4ca6-4c93-a231-07263d6284db
|
|
|
b844eaa3
|
2014-05-13T18:40:14
|
|
SIMD-accelerated merged upsampling routines for MIPS DSPr2
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1297 632fc199-4ca6-4c93-a231-07263d6284db
|
|
|
b7753510
|
2014-05-11T09:36:25
|
|
Convert tabs to spaces in the libjpeg code and the SIMD code (TurboJPEG retains the use of tabs for historical reasons. They were annoying in the libjpeg code primarily because they were not consistently used and because they were used to format as well as indent the code. In the case of TurboJPEG, tabs are used just to indent the code, so even if the editor assumes a different tab width, the code will still be readable.)
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1285 632fc199-4ca6-4c93-a231-07263d6284db
|
|
|
e47364ac
|
2014-05-10T10:10:03
|
|
Modify Windows build system to take into account new assembly file names
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1283 632fc199-4ca6-4c93-a231-07263d6284db
|
|
|
24e92e9f
|
2014-05-10T09:53:34
|
|
Using subdirectories unfortunately opened up a can of worms. In order to prevent object name conflicts, it is necessary to use the subdir-objects automake directive, but it simply doesn't work right on some of the versions of automake we still have to support. Another option would be to add a separate Makefile.am file to each subdirectory, but that requires maintaining a completely different set of build rules for each one. Fortunately, however, we're in the 21st century now, so we can use filenames longer than 8.3.
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1282 632fc199-4ca6-4c93-a231-07263d6284db
|
|
|
72130be9
|
2014-05-09T20:14:26
|
|
Re-organize the x86/x86-64 SIMD routines into separate folders by instruction set so we can name each routine similarly to its corresponding C file. This also makes it easier to add support for new instruction sets.
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1280 632fc199-4ca6-4c93-a231-07263d6284db
|
|
|
1a45b81f
|
2014-05-09T18:06:58
|
|
Remove trailing spaces (+ one additional tab in TJUnitTest.java that was missed in the previous commit)
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1279 632fc199-4ca6-4c93-a231-07263d6284db
|
|
|
e5eaf374
|
2014-05-09T18:00:32
|
|
Convert tabs to spaces in the libjpeg code and the SIMD code (TurboJPEG retains the use of tabs for historical reasons. They were annoying in the libjpeg code primarily because they were not consistently used and because they were used to format as well as indent the code. In the case of TurboJPEG, tabs are used just to indent the code, so even if the editor assumes a different tab width, the code will still be readable.)
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1278 632fc199-4ca6-4c93-a231-07263d6284db
|
|
|
771886c1
|
2014-05-09T14:45:55
|
|
Fix an error in the MIPS DSPr2 fancy upsampling routine
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1277 632fc199-4ca6-4c93-a231-07263d6284db
|
|
|
34347862
|
2014-05-06T09:53:21
|
|
SIMD-accelerated slow integer IDCT routine for MIPS DSPr2
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1269 632fc199-4ca6-4c93-a231-07263d6284db
|
|
|
e189ec7a
|
2014-02-06T19:15:03
|
|
Remove trailing space
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1111 632fc199-4ca6-4c93-a231-07263d6284db
|
|
|
93974690
|
2014-02-06T19:13:24
|
|
Remove trailing space
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1110 632fc199-4ca6-4c93-a231-07263d6284db
|
|
|
2d07ee51
|
2014-02-05T19:03:41
|
|
Create a separate stub file for 64-bit ARM, since it currently implements only the decompression-related functions.
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1109 632fc199-4ca6-4c93-a231-07263d6284db
|
|
|
ba55b2cd
|
2014-02-05T08:15:44
|
|
First pass at ARMv8 64-bit NEON SIMD support
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1108 632fc199-4ca6-4c93-a231-07263d6284db
|
|
|
3e00f03a
|
2014-02-05T07:40:00
|
|
Formatting tweaks
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1107 632fc199-4ca6-4c93-a231-07263d6284db
|
|
|
edc846f4
|
2014-02-05T07:39:38
|
|
Formatting tweaks
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1106 632fc199-4ca6-4c93-a231-07263d6284db
|
|
|
19eeaa79
|
2013-10-31T07:40:24
|
|
Make environment variable syntax consistent between ARM and x86 code, and add an option to disable SIMD on x86 (this option will be added to the x86-64 code as well, but it makes more sense to add it when we add AVX support.)
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1073 632fc199-4ca6-4c93-a231-07263d6284db
|
|
|
fff6c23a
|
2013-10-12T21:39:20
|
|
SIMD-accelerated integer convsamp routine for MIPS DSPr2
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1059 632fc199-4ca6-4c93-a231-07263d6284db
|
|
|
3d727281
|
2013-10-09T18:39:44
|
|
SIMD-accelerated floating point quantize and convsamp routines for MIPS DSPr2
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1058 632fc199-4ca6-4c93-a231-07263d6284db
|
|
|
d3131c1b
|
2013-10-08T02:18:59
|
|
SIMD-accelerated fast integer inverse DCT routine for MIPS DSPr2
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1056 632fc199-4ca6-4c93-a231-07263d6284db
|
|
|
71e06a7d
|
2013-10-08T02:11:21
|
|
SIMD-accelerated fast integer forward DCT routine for MIPS DSPr2
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1055 632fc199-4ca6-4c93-a231-07263d6284db
|