|
aa769feb
|
2015-10-15T02:25:00
|
|
Fix compiler warnings under Visual C++
A few of these are long-standing, but most were exposed when switching
from INT32 to JLONG.
|
|
|
d65e768b
|
2015-10-14T22:26:25
|
|
Fix additional issues reported by UB sanitizers
Most of these involved overrunning the signed 32-bit JLONG type whenever
building libjpeg-turbo with a 32-bit compiler. These issues are not
believed to represent actual security threats, but eliminating them
makes it easier to detect such threats should they arise in the future.
|
|
|
1e32fe31
|
2015-10-14T17:32:39
|
|
Replace INT32 with a new internal datatype (JLONG)
These days, INT32 is a commonly-defined datatype in system headers. We
cannot eliminate the definition of that datatype from jmorecfg.h, since
the INT32 typedef has technically been part of the libjpeg API since
version 5 (1994.) However, using INT32 internally is risky, because the
inclusion of a particular header (Xmd.h, for instance) could change the
definition of INT32 from long to int on 64-bit platforms and thus change
the internal behavior of libjpeg-turbo in unexpected ways (for instance,
failing to correctly set __INT32_IS_ACTUALLY_LONG to match the INT32
typedef-- perhaps as a result of including the wrong version of
jpeglib.h-- could cause libjpeg-turbo to produce incorrect results.)
The library has always been built in environments in which INT32 is
effectively long (on Windows, long is always 32-bit, so effectively it's
the same as int), so it makes sense to turn INT32 into an explicitly
long datatype. This ensures that libjpeg-turbo will always behave
consistently, regardless of the headers included at compile time.
Addresses a concern expressed in #26.
|
|
|
7e3acc0e
|
2015-10-10T10:25:46
|
|
Rename README, LICENSE, BUILDING text files
The IJG README file has been renamed to README.ijg, in order to avoid
confusion (many people were assuming that that was our project's README
file and weren't reading README-turbo.txt) and to lay the groundwork for
markdown versions of the libjpeg-turbo README and build instructions.
|
|
a2e6a9dd
|
2006-02-04T00:00:00
|
|
IJG R6b with x86SIMD V1.02
Independent JPEG Group's JPEG software release 6b
with x86 SIMD extension for IJG JPEG library version 1.02
|
|
489583f5
|
1996-02-07T00:00:00
|
|
The Independent JPEG Group's JPEG software v6a
|
|
|
bc79e068
|
1995-08-02T00:00:00
|
|
The Independent JPEG Group's JPEG software v6
|
|
|
9ba2f5ed
|
1994-12-07T00:00:00
|
|
The Independent JPEG Group's JPEG software v5a
|
|
|
36a4cccc
|
1994-09-24T00:00:00
|
|
The Independent JPEG Group's JPEG software v5
|
|
bbd9b711
|
2014-09-04T17:35:22
|
|
When building libjpeg-turbo on Un*x systems, INT32 is usually typedef'ed to long, not int, so we need to specify an int pointer when doing a 4-byte write to the RGB565 output buffer. On little endian systems, this doesn't matter, but when you write a 32-bit int to a 64-bit long pointer address on a big endian system, you are writing to the upper 4 bytes, not the lower 4 bytes. NOTE: this will probably break on big endian systems that use 16-bit ints (are there any of those still around?)
This patch also removes an unneeded macro from jdmerge.c.
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.4.x@1403 632fc199-4ca6-4c93-a231-07263d6284db
|
|
|
72a3cc0e
|
2014-08-30T20:37:50
|
|
Fix issues with RGB565 color conversion on big endian machines. The RGB565 routines are now abstracted in a separate file, with separate little-endian and big-endian versions defined at compile time through the use of macros (this is similar to how the colorspace extension routines work.) This allows big-endian machines to take advantage of the same performance optimizations as little-endian machines, and it retains the performance on little-endian machines, since the conditional branch for endianness is at a very coarse-grained level.
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.4.x@1399 632fc199-4ca6-4c93-a231-07263d6284db
|
|
|
5de454b2
|
2014-05-18T19:04:03
|
|
libjpeg-turbo has never supported non-ANSI compilers, so get rid of the crufty SIZEOF() macro. It was not being used consistently anyhow, so it would not have been possible to build prior releases of libjpeg-turbo using the broken compilers for which that macro was designed.
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1313 632fc199-4ca6-4c93-a231-07263d6284db
|
|
|
bc56b754
|
2014-05-16T10:43:44
|
|
Get rid of the HAVE_PROTOTYPES configuration option, as well as the related JMETHOD and JPP macros. libjpeg-turbo has never supported compilers that don't handle prototypes. Doing so requires ansi2knr, which isn't even supported in the IJG code anymore.
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1308 632fc199-4ca6-4c93-a231-07263d6284db
|
|
|
78df2e61
|
2014-05-12T09:23:57
|
|
Add support for decompressing to RGB565 (16-bit) pixels
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1295 632fc199-4ca6-4c93-a231-07263d6284db
|
|
|
b7753510
|
2014-05-11T09:36:25
|
|
Convert tabs to spaces in the libjpeg code and the SIMD code (TurboJPEG retains the use of tabs for historical reasons. They were annoying in the libjpeg code primarily because they were not consistently used and because they were used to format as well as indent the code. In the case of TurboJPEG, tabs are used just to indent the code, so even if the editor assumes a different tab width, the code will still be readable.)
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1285 632fc199-4ca6-4c93-a231-07263d6284db
|
|
|
e5eaf374
|
2014-05-09T18:00:32
|
|
Convert tabs to spaces in the libjpeg code and the SIMD code (TurboJPEG retains the use of tabs for historical reasons. They were annoying in the libjpeg code primarily because they were not consistently used and because they were used to format as well as indent the code. In the case of TurboJPEG, tabs are used just to indent the code, so even if the editor assumes a different tab width, the code will still be readable.)
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1278 632fc199-4ca6-4c93-a231-07263d6284db
|
|
|
ff6961f3
|
2014-04-20T09:17:11
|
|
This patch accomplishes the following:
-- Auto-generates HAVE_LOCALE_H macro and adds it to jconfig.h (this is used by rdjpgcom.c.)
-- Reconciles the description and ordering of macros between config.h.in and jconfig.h.in, so the two files can be easily diffed.
-- Eliminates the use of the autoheader-generated config.h in the project and moves relevant internal-only macros into a new file, jconfigint.h. This is to avoid "already defined" warnings in files that were including both config.h (to get the internal autotools package information or the INLINE definition) and jconfig.h.
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1258 632fc199-4ca6-4c93-a231-07263d6284db
|
|
|
a6ef282a
|
2013-09-28T03:23:49
|
|
Some of the IJG headers say "Modified by", so clarify that our "Modifications" are not referring to these.
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1053 632fc199-4ca6-4c93-a231-07263d6284db
|
|
|
a73e870a
|
2012-12-31T02:52:30
|
|
Change the copyright notices to make it clear that our modified files are not part of the IJG's software.
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.2.x@873 632fc199-4ca6-4c93-a231-07263d6284db
|
|
|
cac10513
|
2012-03-16T14:37:36
|
|
Fix the behavior of the alpha-enabled colorspace constants whenever libjpeg-turbo is built without SIMD support and merged upsampling is used.
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.2.x@811 632fc199-4ca6-4c93-a231-07263d6284db
|
|
|
a7466c9d
|
2012-01-26T22:20:31
|
|
Move INLINE macro into config.h. That's really where it belongs anyhow, since it is used only internally, and putting it in jconfig.h was causing problems with DevIL.
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@739 632fc199-4ca6-4c93-a231-07263d6284db
|
|
|
67ce3b23
|
2011-12-19T02:21:03
|
|
Added new alpha channel colorspace constants/pixel formats, so applications can specify that they need the unused byte in a 4-component RGB output buffer set to 0xFF when decompressing.
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@732 632fc199-4ca6-4c93-a231-07263d6284db
|
|
|
b4570bbf
|
2011-09-07T06:31:00
|
|
Improve performance of non-SIMD color conversion routines and use global constants to define colorspace extension parameters
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@698 632fc199-4ca6-4c93-a231-07263d6284db
|
|
|
8ece7fef
|
2009-08-06T08:32:00
|
|
Update copyrights to indicate files modified with colorspace extensions
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@57 632fc199-4ca6-4c93-a231-07263d6284db
|
|
|
f25c071e
|
2009-04-03T12:00:51
|
|
Implement new colorspaces to allow directly compressing from/decompressing to RGB/RGBX/BGR/BGRX/XBGR/XRGB without conversion
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@35 632fc199-4ca6-4c93-a231-07263d6284db
|
|
59a3938b
|
2009-03-09T13:15:56
|
|
Framework for supporting SIMD acceleration
Designed to impose minimal changes on the "normal" code.
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@14 632fc199-4ca6-4c93-a231-07263d6284db
|