kmx git

Commit	Date	Message
eb753630	2024-08-31T16:50:08	Update URLs - Eliminate unnecessary "www." - Use HTTPS. - Update Java, MSYS, tdm-gcc, and NSIS URLs. - Update URL and title of Agner Fog's assembly language optimization manual. - Remove extraneous information about MASM and Borland Turbo Assembler and outdated NASM URLs from the x86 assembly headers, and mention Yasm.
7b844bfd	2023-07-28T11:46:10	x86-64 SIMD: Use std stack frame/prologue/epilogue This allows debuggers and profilers to reliably capture backtraces from within the x86-64 SIMD functions. In places where rbp was previously used to access temporary variables (after stack alignment), we now use r15 and save/restore it accordingly. The total amount of work is approximately the same, because the previous code pushed the pre-alignment stack pointer to the aligned stack. The new prologue and epilogue actually have fewer instructions. Also note that the {un}collect_args macros now use rbp instead of rax to access arguments passed on the stack, so we save a few instructions there as well. Based on: https://github.com/alk/libjpeg-turbo/commit/debcc7c3b436467aea8d02c66a514c5099d0ad37 Closes #707 Closes #708
9a51a87a	2019-10-17T11:21:32	x86 SIMD: Remove obsolete [TAB8] comments With apologies to Richard Hendricks, our assembly code no longer uses tabs.
aa9db616	2019-04-15T17:55:47	x86 SIMD: Check for CPUID leaf 07H before using According to Intel's manual [1], "If a value entered for CPUID.EAX is higher than the maximum input value for basic or extended function for that processor then the data for the highest basic information leaf is returned." Right now, libjpeg-turbo doesn't first check that leaf 07H is supported before attempting to use it, so the ostensible AVX2 bit (Bit 05) of the CPUID result might actually be Bit 05 from a lower leaf. That bit might be set, even if the CPU doesn't support AVX2. This commit modifies the x86 and x86-64 SIMD feature detection code so that it first checks whether CPUID leaf 07H is supported before attempting to use it to check for AVX2 instruction support. DRC: This commit should fix https://bugzilla.mozilla.org/show_bug.cgi?id=1520760 However, I have not personally been able to reproduce that issue, despite using a Nehalem (pre-AVX2) CPU on which the maximum CPUID leaf has been limited via a BIOS setting. Closes #348 [1] "Intel® 64 and IA-32 Architectures Software Developer's Manual, Volume 2 (2A, 2B, 2C & 2D): Instruction Set Reference, A-Z", https://software.intel.com/sites/default/files/managed/a4/60/325383-sdm-vol-2abcd.pdf, page 3-192.
d5f281b7	2018-09-28T15:46:35	SIMD: Fix c000001d exception on Win 7 w/o SP1 Apparently Windows 7 without SP1 has O/S support for XSAVE but not for YMM registers, and this exposed a bug in our usage of xgetbv. The test instruction will set ZF only if none of the bits match between the two operarands, so in effect, we were enabling AVX2 instructions if the O/S supported XSAVE and the CPU supported AVX2 but the O/S only supported XMM registers. This bug was not exposed on, for instance, Windows XP or RHEL 5 because those O/S's do not support XSAVE. Fixes #288
19c791cd	2018-03-08T10:55:20	Improve code formatting consistency With rare exceptions ... - Always separate line continuation characters by one space from preceding code. - Always use two-space indentation. Never use tabs. - Always use K&R-style conditional blocks. - Always surround operators with spaces, except in raw assembly code. - Always put a space after, but not before, a comma. - Never put a space between type casts and variables/function calls. - Never put a space between the function name and the argument list in function declarations and prototypes. - Always surround braces ('{' and '}') with spaces. - Always surround statements (if, for, else, catch, while, do, switch) with spaces. - Always attach pointer symbols ('' and '') to the variable or function name. - Always precede pointer symbols ('' and '**') by a space in type casts. - Use the MIN() macro from jpegint.h within the libjpeg and TurboJPEG API libraries (using min() from tjutil.h is still necessary for TJBench.) - Where it makes sense (particularly in the TurboJPEG code), put a blank line after variable declaration blocks. - Always separate statements in one-liners by two spaces. The purpose of this was to ease maintenance on my part and also to make it easier for contributors to figure out how to format patch submissions. This was admittedly confusing (even to me sometimes) when we had 3 or 4 different style conventions in the same source tree. The new convention is more consistent with the formatting of other OSS code bases. This commit corrects deviations from the chosen formatting style in the libjpeg API code and reformats the TurboJPEG API code such that it conforms to the same standard. NOTES: - Although it is no longer necessary for the function name in function declarations to begin in Column 1 (this was historically necessary because of the ansi2knr utility, which allowed libjpeg to be built with non-ANSI compilers), we retain that formatting for the libjpeg code because it improves readability when using libjpeg's function attribute macros (GLOBAL(), etc.) - This reformatting project was accomplished with the help of AStyle and Uncrustify, although neither was completely up to the task, and thus a great deal of manual tweaking was required. Note to developers of code formatting utilities: the libjpeg-turbo code base is an excellent test bed, because AFAICT, it breaks every single one of the utilities that are currently available. - The legacy (MMX, SSE, 3DNow!) assembly code for i386 has been formatted to match the SSE2 code (refer to ff5685d5344273df321eb63a005eaae19d2496e3.) I hadn't intended to bother with this, but the Loongson MMI implementation demonstrated that there is still academic value to the MMX implementation, as an algorithmic model for other 64-bit vector implementations. Thus, it is desirable to improve its readability in the same manner as that of the SSE2 implementation.
88421563	2018-02-23T21:56:32	Make SIMD symbols private for x86[-64] ELF builds
6abd3916	2016-11-15T08:47:43	Unified CMake-based build system See #56 for discussion. Fixes #21, Fixes #29, Fixes #37, Closes #56, Fixes #58, Closes #73 Obviates #82 See also: https://sourceforge.net/p/libjpeg-turbo/feature-requests/5/ https://sourceforge.net/p/libjpeg-turbo/patches/5/

eb753630

2024-08-31T16:50:08

Update URLs - Eliminate unnecessary "www." - Use HTTPS. - Update Java, MSYS, tdm-gcc, and NSIS URLs. - Update URL and title of Agner Fog's assembly language optimization manual. - Remove extraneous information about MASM and Borland Turbo Assembler and outdated NASM URLs from the x86 assembly headers, and mention Yasm.

7b844bfd

2023-07-28T11:46:10

x86-64 SIMD: Use std stack frame/prologue/epilogue This allows debuggers and profilers to reliably capture backtraces from within the x86-64 SIMD functions. In places where rbp was previously used to access temporary variables (after stack alignment), we now use r15 and save/restore it accordingly. The total amount of work is approximately the same, because the previous code pushed the pre-alignment stack pointer to the aligned stack. The new prologue and epilogue actually have fewer instructions. Also note that the {un}collect_args macros now use rbp instead of rax to access arguments passed on the stack, so we save a few instructions there as well. Based on: https://github.com/alk/libjpeg-turbo/commit/debcc7c3b436467aea8d02c66a514c5099d0ad37 Closes #707 Closes #708

9a51a87a

2019-10-17T11:21:32

x86 SIMD: Remove obsolete [TAB8] comments With apologies to Richard Hendricks, our assembly code no longer uses tabs.

aa9db616

2019-04-15T17:55:47

x86 SIMD: Check for CPUID leaf 07H before using According to Intel's manual [1], "If a value entered for CPUID.EAX is higher than the maximum input value for basic or extended function for that processor then the data for the highest basic information leaf is returned." Right now, libjpeg-turbo doesn't first check that leaf 07H is supported before attempting to use it, so the ostensible AVX2 bit (Bit 05) of the CPUID result might actually be Bit 05 from a lower leaf. That bit might be set, even if the CPU doesn't support AVX2. This commit modifies the x86 and x86-64 SIMD feature detection code so that it first checks whether CPUID leaf 07H is supported before attempting to use it to check for AVX2 instruction support. DRC: This commit should fix https://bugzilla.mozilla.org/show_bug.cgi?id=1520760 However, I have not personally been able to reproduce that issue, despite using a Nehalem (pre-AVX2) CPU on which the maximum CPUID leaf has been limited via a BIOS setting. Closes #348 [1] "Intel® 64 and IA-32 Architectures Software Developer's Manual, Volume 2 (2A, 2B, 2C & 2D): Instruction Set Reference, A-Z", https://software.intel.com/sites/default/files/managed/a4/60/325383-sdm-vol-2abcd.pdf, page 3-192.

d5f281b7

2018-09-28T15:46:35

SIMD: Fix c000001d exception on Win 7 w/o SP1 Apparently Windows 7 without SP1 has O/S support for XSAVE but not for YMM registers, and this exposed a bug in our usage of xgetbv. The test instruction will set ZF only if none of the bits match between the two operarands, so in effect, we were enabling AVX2 instructions if the O/S supported XSAVE and the CPU supported AVX2 but the O/S only supported XMM registers. This bug was not exposed on, for instance, Windows XP or RHEL 5 because those O/S's do not support XSAVE. Fixes #288

19c791cd

2018-03-08T10:55:20

Improve code formatting consistency With rare exceptions ... - Always separate line continuation characters by one space from preceding code. - Always use two-space indentation. Never use tabs. - Always use K&R-style conditional blocks. - Always surround operators with spaces, except in raw assembly code. - Always put a space after, but not before, a comma. - Never put a space between type casts and variables/function calls. - Never put a space between the function name and the argument list in function declarations and prototypes. - Always surround braces ('{' and '}') with spaces. - Always surround statements (if, for, else, catch, while, do, switch) with spaces. - Always attach pointer symbols ('*' and '**') to the variable or function name. - Always precede pointer symbols ('*' and '**') by a space in type casts. - Use the MIN() macro from jpegint.h within the libjpeg and TurboJPEG API libraries (using min() from tjutil.h is still necessary for TJBench.) - Where it makes sense (particularly in the TurboJPEG code), put a blank line after variable declaration blocks. - Always separate statements in one-liners by two spaces. The purpose of this was to ease maintenance on my part and also to make it easier for contributors to figure out how to format patch submissions. This was admittedly confusing (even to me sometimes) when we had 3 or 4 different style conventions in the same source tree. The new convention is more consistent with the formatting of other OSS code bases. This commit corrects deviations from the chosen formatting style in the libjpeg API code and reformats the TurboJPEG API code such that it conforms to the same standard. NOTES: - Although it is no longer necessary for the function name in function declarations to begin in Column 1 (this was historically necessary because of the ansi2knr utility, which allowed libjpeg to be built with non-ANSI compilers), we retain that formatting for the libjpeg code because it improves readability when using libjpeg's function attribute macros (GLOBAL(), etc.) - This reformatting project was accomplished with the help of AStyle and Uncrustify, although neither was completely up to the task, and thus a great deal of manual tweaking was required. Note to developers of code formatting utilities: the libjpeg-turbo code base is an excellent test bed, because AFAICT, it breaks every single one of the utilities that are currently available. - The legacy (MMX, SSE, 3DNow!) assembly code for i386 has been formatted to match the SSE2 code (refer to ff5685d5344273df321eb63a005eaae19d2496e3.) I hadn't intended to bother with this, but the Loongson MMI implementation demonstrated that there is still academic value to the MMX implementation, as an algorithmic model for other 64-bit vector implementations. Thus, it is desirable to improve its readability in the same manner as that of the SSE2 implementation.

88421563

2018-02-23T21:56:32

Make SIMD symbols private for x86[-64] ELF builds

6abd3916

2016-11-15T08:47:43

Unified CMake-based build system See #56 for discussion. Fixes #21, Fixes #29, Fixes #37, Closes #56, Fixes #58, Closes #73 Obviates #82 See also: https://sourceforge.net/p/libjpeg-turbo/feature-requests/5/ https://sourceforge.net/p/libjpeg-turbo/patches/5/

kc3-lang/libjpeg-turbo/simd/x86_64/jsimdcpu.asm

simd/x86_64/jsimdcpu.asm

Log