|
5b5b67f2
|
2023-05-01T22:30:41
|
|
Add support for modmap None (#291)
Unlike current xkbcommon, X11’s xkbcomp allows to remove entries in
the modifiers’ map using “modifier_map None { … }”.
“None” is translated to the special value “XkbNoModifier” defined in
“X11/extensions/XKB.h”. Then it relies on the fact that in "CopyModMapDef",
the following code:
1U << entry->modifier
ends up being zero when “entry->modifier” is “XkbNoModifier” (i.e. 0xFF).
Indeed, it relies on the overflow behaviour of the left shift, which in
practice resolves to use only the 5 low bits of the shift amount, i.e.
0x1F here. Then the result of “1U << 0xFF” is cast to “char”, i.e. 0.
This is a good trick but too magical, so in libxkbcommon we will use
an explicit test against our new constant XKB_MOD_NONE.
|
|
40aab05e
|
2019-12-27T13:03:20
|
|
build: include config.h manually
Previously we included it with an `-include` compiler directive. But
that's not portable. And it's better to be explicit anyway.
Every .c file should have `include "config.h"` first thing.
Signed-off-by: Ran Benita <ran@unusedvar.com>
|
|
ae7856db
|
2017-06-26T21:38:52
|
|
text: NULL-terminate SI mask names
The list should have a NULL sentry. Add one.
testcase: 'interpret KP_Delete+AnyOfOrNaneo(ll)'
Signed-off-by: Daniel Stone <daniels@collabora.com>
|
|
9045b035
|
2018-07-23T11:17:17
|
|
text: init the target buffer to zero
There's a (theoretical?) path where we might end up strcpy() buf without ever
writing to it. This happens if the mask is nonzero but specifies a modifier
larger than the one in the xkb_mod_set.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
787faf36
|
2014-04-22T12:23:36
|
|
keymap: don't use darray in xkb_mod_set
Instead just statically allocate the mods array (of size MAX_MOD_SIZE =
32). The limit is not going anywhere, and static allocations are nicer
(nicer code, no OOM, etc.). It's also small and dense enough.
Signed-off-by: Ran Benita <ran234@gmail.com>
|
|
|
6b1cdee1
|
2014-04-22T11:47:23
|
|
keymap: add and use xkb_mods_{foreach,enumerate}()
To iterate over an xkb_mod_set. Slightly nicer interface and makes
transitioning from darray easier.
Signed-off-by: Ran Benita <ran234@gmail.com>
|
|
|
edc0aef5
|
2013-02-08T13:21:27
|
|
text: take xkb_mod_set instead of the entire keymap
The modifier printing functions only need the modifier information, they
don't care about keys or leds, etc.
Signed-off-by: Ran Benita <ran234@gmail.com>
|
|
|
ca3170ad
|
2013-02-08T13:09:33
|
|
Add struct xkb_mod_set
The only thing that the compilation phase needs the keymap for currently
is for access to the modifier information (it also modifies it in
place!). We want to only pass along the neccessary information, to make
it more tractable and testable, so instead of passing the entire keymap
we add a new 'mod_set' object and pass a (const) reference to that.
The new object is just the old array of 'struct xkb_mod'.
Signed-off-by: Ran Benita <ran234@gmail.com>
|
|
|
51a1df2f
|
2014-04-19T15:56:27
|
|
keymap: move ModNameToIndex from text.c and use it in keymap.c
Signed-off-by: Ran Benita <ran234@gmail.com>
|
|
|
769b91c5
|
2014-02-08T15:30:05
|
|
Use (1u << idx) instead of (1 << idx) where appropriate
It doesn't matter (I think), since the implicit conversion doesn't have
any effect (e.g. sign-extension). But it's better to be aware of the
type.
Signed-off-by: Ran Benita <ran234@gmail.com>
|
|
|
e91d2653
|
2013-08-01T23:09:46
|
|
scanner: allow empty key name literals
Some keymaps actually have this, like the quartz.xkb which is tested. We
need to support these.
https://bugs.freedesktop.org/show_bug.cgi?id=67654
Reported-By: Gatis Paeglis <gatis.paeglis@digia.com>
Signed-off-by: Ran Benita <ran234@gmail.com>
|
|
|
be38862b
|
2013-07-26T00:50:26
|
|
keymap: remove struct xkb_key_redirect_action
The file src/xkbcomp/action.c already doesn't handle this action type
and fails if it encounters it. So lets not pretend to do something with
it, and ignore it rather than failing.
If we/someone wants this we can consider implementing it.
Signed-off-by: Ran Benita <ran234@gmail.com>
|
|
|
d1eae42a
|
2013-03-01T21:31:08
|
|
text: some style changes
Signed-off-by: Ran Benita <ran234@gmail.com>
|
|
|
4e8dcca8
|
2013-03-01T18:33:40
|
|
text: clean up and fix the *MaskText functions
The snprintf trick that LedStateText and ControlMaskText do cannot work,
because you can't use the buffer as an argument to write to itself!
(posix at least has 'restrict' there). So those two actually never
worked for more than one value (i.e. with a +).
Fix that, and do the same cleanup to ModMaskText. Now we have 3
functions which look exactly the same, oh well.
Also increase the context text buffer size, you never know.
Signed-off-by: Ran Benita <ran234@gmail.com>
|
|
|
8cee7490
|
2013-02-17T22:18:57
|
|
Change 'indicator' to 'led' everywhere possible
The code currently uses the two names interchangeably.
Settle on 'led', because it is shorter, more recognizable, and what we
use in our API (though of course the parser still uses 'indicator').
In camel case we make it 'Led'.
We change 'xkb_indicator_map' to just 'xkb_led' and the variables of
this type are 'led'. This mimics 'xkb_key' and 'key'.
IndicatorNameInfo and LEDInfo are changed to 'LedNameInfo' and
'LedInfo', and the variables are 'ledi' (like 'keyi' etc.). This is
instead of 'ii' and 'im'.
This might make a few places a bit confusing, but less than before I
think. It's also shorter.
Signed-off-by: Ran Benita <ran234@gmail.com>
|
|
|
998c957a
|
2012-10-30T18:21:56
|
|
action: don't allow private actions with a known type
Some obscure bug having to do with Private actions; see the comments.
This was prompted by:
https://bugs.freedesktop.org/show_bug.cgi?id=56491
Signed-off-by: Ran Benita <ran234@gmail.com>
|
|
|
6a94b122
|
2012-10-22T20:49:44
|
|
Split the mods, layout, leds parts of xkb_state_components
Note first:
This commits breaks the ABI somewhat. If an application is run against
this commit without recompiling against the updated header, these break:
- xkb_state_layout_*_is_active always retuns false.
- xkb_state_serialize_mods always returns 0.
So it might break layout switching in some applications. However,
xkbcommon-compat.h provides the necessary fixes, so recompiling should
work (though updating the application is even better).
Split the enum to its individual components, which enables us to refer
to them individually. We will use that later for reporting which
components of the state have changed after update.
Signed-off-by: Ran Benita <ran234@gmail.com>
|
|
|
bb82759c
|
2012-10-18T23:08:10
|
|
Move _text() functions from keymap-dump to text.c
And make them use context_get_buffer() instead of using a static char
array.
This was the last non-thread-safe piece we had, as far as I can tell.
Signed-off-by: Ran Benita <ran234@gmail.com>
|
|
|
e6946ae2
|
2012-10-18T22:55:17
|
|
Remove a couple more uses of static char buffers
Signed-off-by: Ran Benita <ran234@gmail.com>
|
|
|
714e95e1
|
2012-10-18T22:51:10
|
|
Contextualize GetBuffer()
Instead storing the buffer in a non-thread-safe static array, we move it
to the context.
Signed-off-by: Ran Benita <ran234@gmail.com>
|
|
|
eb748ab6
|
2012-10-18T21:04:27
|
|
Clean up xkb_sym_interpret a bit
First we split the LEVEL_ONE_ONLY bit off of the 'match' field, which
allows us to turn enum xkb_match_operation to a simple enum and remove
the need for MATCH_OP_MASK.
Next we rename 'act' to 'action', because we've settled on that
everywhere else.
Finally, SIMatchText is changed to not handle illegal values - it
shouldn't get any. This removes one usage of the GetBuffer hack.
Signed-off-by: Ran Benita <ran234@gmail.com>
|
|
|
6d74e66e
|
2012-10-06T17:53:53
|
|
Replace 0xff with MOD_REAL_MASK_ALL
To make it easier to see where it's used. The name is just to match
MOD_REAL.
Signed-off-by: Ran Benita <ran234@gmail.com>
|
|
|
39232e6d
|
2012-10-06T17:21:09
|
|
Remove now-unneeded mod type annotations
Most of the mod type annotations can now be changed to MOD_BOTH, because
if you pass a mask which can only contain real mods in the first place to
e.g. ModMaskText, then MOD_REAL and MOD_BOTH will give the same result.
In the cases where MOD_BOTH is only ever the argument, we just remove
it. What's left is where it really "matters".
Signed-off-by: Ran Benita <ran234@gmail.com>
|
|
|
6d580127
|
2012-10-06T14:15:06
|
|
text: share code for modifiers
Add static common functions which take enum mod_type, and change the
existing ones to use them.
Signed-off-by: Ran Benita <ran234@gmail.com>
|
|
|
424de613
|
2012-10-05T22:46:21
|
|
Keep real and virtual mods in the same table in the keymap
We change the keymap->vmods array into keymap->mods, and change it's
member type from struct xkb_vmod to struct xkb_mod. This table now
includes the real modifiers in the first 8 places. To distinguish
between them, we add an enum mod_type to struct xkb_mod.
Besides being a more reasonable approach, this enables us to share
some code later, remove XKB_NUM_CORE_MODS (though the 0xff mask still
appears in a few places), and prepares us to flat out remove the
distinction in the future. This commit just does the conversion.
Signed-off-by: Ran Benita <ran234@gmail.com>
|
|
|
1005b320
|
2012-10-05T22:07:04
|
|
Don't use shifted virtual modifier masks
Modifier masks can be confusing in some places. For example,
key->vmodmap only contains virtual modifiers, where the first is in
position 0, the second in 1 etc., while normally in a xkb_mod_mask_t the
virtual modifiers start from the 8th (XKB_NUM_CORE_MODS) position. This
happens in some other places as well.
Change all of the masks to be in the usual real+virtual format, and when
we need to access e.g. keymap->vmods we just adjust by
XKB_NUM_CORE_MODS. (This also goes for indexes, e.g.
interpret->virtual_modifier).
This makes this stuff easier to reason about.
Signed-off-by: Ran Benita <ran234@gmail.com>
|
|
|
9ebd2f67
|
2012-10-06T14:34:17
|
|
text: explicitly take mod_type in mod functions
This essentially "tags" each invocation of the functions with the
modifier type of the argument, which allows for easy grepping for them
(with the aim being, to remove anything but MOD_BOTH).
Signed-off-by: Ran Benita <ran234@gmail.com>
|
|
|
dd29b14e
|
2012-10-03T12:57:53
|
|
Remove the XKB_NUM_VIRTUAL_MODIFIERS limit
Turn the virtual modifiers arrays in the keymap to a single darray,
which doesn't use this limit. The number of virtual modifiers is still
limited by the size of xkb_mod_mask_t, so we make sure not to go over
that.
Signed-off-by: Ran Benita <ran234@gmail.com>
|
|
|
3b389b15
|
2012-09-27T18:49:13
|
|
Don't limit key names to 4 characters
Currently you can't give a key in xkb_keycodes a name of more than
XKB_KEY_NAME_LENGTH (= 4) chars. This is a pretty annoying and arbitrary
limitation; it leads to names such as <RTSH>, <COMP>, <PRSC>, <KPAD>
etc. which may be hard to decipher, and makes it impossible to give
more standard names (e.g. from linux/input.h) to keycodes.
The purpose of this, as far as I can tell, was to save memory and to
allow encoding a key name directly to a 32 bit value (unsigned long it
was).
We remove this limitation by just storing the names as atoms; this lifts
the limit, allows for easy comparison like the unsigned long thing, and
doesn't use more memory than previous solution. It also relieves us from
doing all of the annoying conversions to/from long.
This has a large diffstat only because KeyNameText, which is used a lot,
now needs to take the context in order to resolve the atom.
Signed-off-by: Ran Benita <ran234@gmail.com>
|
|
|
bbaa11c6
|
2012-09-21T14:58:31
|
|
Rename map.{c,h} to keymap.{c,h}
Seeing as we don't like "map" anymore.
Signed-off-by: Ran Benita <ran234@gmail.com>
|
|
|
b2110705
|
2012-09-16T14:45:32
|
|
Organize src/ and test/ headers
- Add context.h and move context-related functions from xkb-priv.h to
it.
- Move xkb_context definition back to context.c.
- Add keysym.h and move keysym upper/lower/keypad from xkb-priv.h to it.
- Rename xkb-priv.h to map.h since it only contains keymap-related
definitions and declarations now.
- Remove unnecessary includes and some and some other small cleanups.
Signed-off-by: Ran Benita <ran234@gmail.com>
|
|
a8d462e3
|
2012-09-11T12:28:29
|
|
kbproto unentanglement: XkbSI match flags
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
|
|
|
ed9fd5be
|
2012-09-11T12:20:21
|
|
kbproto unentanglement: control actions
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
|
|
|
830fe671
|
2012-09-10T20:07:54
|
|
kbproto unentanglement: XkbIM_*
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
|
|
|
0b2506db
|
2012-09-10T19:23:16
|
|
kbproto unentanglement: action types
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
|
|
|
314965b1
|
2012-08-21T14:40:51
|
|
Remove deprecated actions
We didn't do anything with ISO_Lock, ActionMessage, RedirectKey, and the
device-specifying variants of the pointer actions, so remove those.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
|
|
|
b04d896a
|
2012-08-21T12:48:20
|
|
kbproto unentanglement: XkbNumVirtualMods
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
|
|
|
f5dffd2b
|
2012-08-21T11:21:19
|
|
kbproto untanglement: XkbKeyNameLength
Define it ourselves as XKB_KEY_NAME_LENGTH and use that, instead of the
one from XKB.h.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
|
|
|
af2a8b3a
|
2012-09-02T21:45:42
|
|
Unify some string tables from xkbcomp, text and keymap-dump
We move the LookupEntry struct from expr.h to text.h, along with most of
the lookup tables. This makes them available everywhere.
Looking up a value in the LookupEntry format is slower than direct index
mapping, but it allows multiple names per value (with the canonical one
being first) and "all"- and "none"-type masks. These functions are not
used anywhere efficiency matters.
Signed-off-by: Ran Benita <ran234@gmail.com>
|
|
|
7ae0c6ba
|
2012-08-31T19:26:51
|
|
Convert rest of names in xkb_keymap back to atoms
These were kept as atoms, but since the keymap was exposed in the API,
we converted them to strings; no the keymap is no longer exposed, so we
can go back to atoms. They make the keymap smaller (at least on 64-bit
machines) and the comparisons faster.
Signed-off-by: Ran Benita <ran234@gmail.com>
|
|
|
41472822
|
2012-08-29T15:17:00
|
|
Use XKB_MOD_INVALID instead of XkbNoModifier
Signed-off-by: Ran Benita <ran234@gmail.com>
|
|
|
591df115
|
2012-08-27T19:20:41
|
|
Move enum xkb_file_type to xkbcomp/ast.h
This is a more suitable place for this enum, since it's internal to
xkbcomp.
Signed-off-by: Ran Benita <ran234@gmail.com>
|
|
|
efc2d741
|
2012-08-27T18:58:36
|
|
xkbcomp: clean up compile_keymap function
We make the xkb_file_type enum sequential instead of masks, and then
we don't have to repeat the file types several times in the function.
Makes the code cleaner.
Signed-off-by: Ran Benita <ran234@gmail.com>
|
|
|
07b18bde
|
2012-08-09T02:33:51
|
|
Modernize struct xkb_mods
Currently xkb_mods has the following members:
- uint8_t real_mods - 8 X11 core mods
- xkb_mod_mask_t vmods - 16 virtual mods, zero-based index
- xkb_mod_mask_t mask - the computed effective *real* modifier mask,
basically a cache for the first two which is:
real_mods | real mods computed from vmods
Our API acts on masks which combine the real_mods and vmods into a
single value, which is:
8 first bits real mods | 16 next bits virtual mods
(XkbNumModifiers = 8, XkbNumVirtualMods = 16). This is also the format
which ResolveVModMask uses (which is where all the modifier masks really
"come from", e.g. "Shift+Lock+Level5" -> xkb_mod_mask_t).
What the code does now after getting the mask from ResolveVModMask, is
to break it into real part and virtual part and store them seperately,
and then join them back together when the effective mask is calculated.
This is all pretty useless work. We change xkb_mods to the following:
- xkb_mod_mask_t mods - usually what ResolveVModMask returns
- xkb_mod_mask_t mask - the computed mask cache
And try to consistently use the word "mods" for the original,
non-effective mods and mask for the effective mods (which can only
contain real mods for now, because things break otherwise).
The separation is also made clearer. The effective masks are computed by
UpdateModifiersFromCompat after all the sections have been compiled;
before this the mask field is never touched; after this (i.e. map.c and
state.c) the original mods field is never touched. This single execption
to this rule is keymap-dump.c: it needs to print out only the original
modifiers, not computed ones. This is also the reason why we actually
keep two fields instead keeping one and modifying it in place.
The next logical step is probably to turn the real mods into vmods
themselves, and get rid of the distinction entirely (in a compatible
way).
Signed-off-by: Ran Benita <ran234@gmail.com>
|
|
|
4c00278c
|
2012-08-02T01:09:41
|
|
Remove xproto build dependency
Very little left to do for this.
Signed-off-by: Ran Benita <ran234@gmail.com>
|
|
|
b2c4331a
|
2012-07-28T22:15:59
|
|
Handle key names consistently
We treat the key names as fixed length, non NUL terminated strings of
length XkbKeyNameLength, and use the appropriate *Text functions to
print them. We also use strncpy everywhere instead of memcpy to copy
the names, because it does some NUL padding and we might as well.
Signed-off-by: Ran Benita <ran234@gmail.com>
|
|
|
9617b092
|
2012-08-05T12:03:51
|
|
filecomp: fix path and error message
Signed-off-by: Ran Benita <ran234@gmail.com>
|
|
|
7c7e4341
|
2012-08-01T11:25:34
|
|
Use only one set of core mod name-to-index functions
These were repeated 5 times.
Note that this changes the ABI slightly: XKB_MOD_NAME_CAPS is changed
from "Caps Lock" to "Lock", which is the ordinary legacy mod name for
it. Since its hidden behind a #define, it's best to stay compatible with
the old names (as I think was intended, given that "Mod1", etc. are the
same).
Signed-off-by: Ran Benita <ran234@gmail.com>
|
|
|
80ab9f12
|
2012-08-02T23:40:31
|
|
keymap-dump: use ActionTypeText
Signed-off-by: Ran Benita <ran234@gmail.com>
|
|
|
4f843c81
|
2012-07-24T13:24:59
|
|
Drop Xkbc prefix of text functions
Not really needed and inconsistent.
Signed-off-by: Ran Benita <ran234@gmail.com>
|
|
|
6cb98200
|
2012-07-24T13:15:40
|
|
Use xkb_mod_mask_t and xkb_mask_index_t throughout
Signed-off-by: Ran Benita <ran234@gmail.com>
|
|
|
1313af8f
|
2012-07-15T01:31:34
|
|
Get rid of xkb_key_names
Signed-off-by: Ran Benita <ran234@gmail.com>
|
|
|
9308a460
|
2012-07-17T10:20:15
|
|
Run source tree through uncrustify
.uncrustify.cfg committed for future reference also, but had to manually
fix up a few things: it really likes justifying struct initialisers.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
|
|
|
1f492901
|
2012-07-11T18:00:31
|
|
Enlarge keysym name buffers and mention in comment
The longest keysym is 27 chars long.
Signed-off-by: Ran Benita <ran234@gmail.com>
|
|
|
48b4d30a
|
2012-06-29T17:05:33
|
|
Use enum for file types
enums are nice for some type safety and readability. This one also
removes the distinction between file type mask / file type index and
some naming consistency.
Signed-off-by: Ran Benita <ran234@gmail.com>
|
|
|
5e59ef3f
|
2012-05-09T17:54:37
|
|
Remove support for xkb_layout and xkb_semantics file types
These are two aggregate file types which are not used anywhere. We
maintain useful-enough backward compatibility in the parser, by treating
them as xkb_keymap. The keymap type allows for all types of components,
so they will still compile fine if they ever come up.
Signed-off-by: Ran Benita <ran234@gmail.com>
|
|
|
38cb6390
|
2012-05-09T15:15:30
|
|
Change all 'xkb' xkb_keymap names to 'keymap'
To make it a bit more clear what it actually is.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
|
|
|
e1af48bc
|
2012-05-09T13:22:34
|
|
Rename keysym <-> string API
Change them to refer to the string representation of the keysym's name
as a name rather than a string, since we want to add API to get the
Unicode printable representation as well.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
|
|
|
b610b2b9
|
2012-05-08T14:52:23
|
|
Rename XKBcommonint.h to xkb-priv.h and use it
Make the files in the src/* directory use their own header or a
consilidated private header. This makes the file dependencies clearer.
Also drop the pointless "xkb" file name prefix, add split a few
declarations to their own files (atom.h and text.h).
Signed-off-by: Ran Benita <ran234@gmail.com>
|
|
|
62a75dc1
|
2012-04-10T23:08:49
|
|
Remove unused stuff from XKBcommonint.h
Signed-off-by: Ran Benita <ran234@gmail.com>
|
|
|
a641a185
|
2012-04-06T03:38:55
|
|
Use stdbool.h
'Cause defining your own True and False is so 1990's.
Signed-off-by: Ran Benita <ran234@gmail.com>
[daniels: Fixed for xkb_desc -> xkb_keymap changes.]
|
|
|
8fbd44fd
|
2012-04-06T03:12:50
|
|
Implicitly include config.h in all files
The definitions in config.h should be available in all files an
implementation detail; it can be included through the build system
instead of having each file pull it every time.
This is especially helpful with AC_USE_SYSTEM_EXTENSIONS, as _GNU_SOURCE
and friends can have an effect by merely being defined, which can lead
to some confusion if its effective for only half the files.
And we don't really support a build _without_ config.h; so, one less
thing to worry about.
Signed-off-by: Ran Benita <ran234@gmail.com>
|
|
|
ef88c7ef
|
2012-04-03T15:14:16
|
|
Rename xkb_desc to xkb_keymap
struct xkb_desc was just a hangover from the old XkbDescRec, which isn't
a very descriptive name.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
|
|
|
2165e16e
|
2012-03-24T02:36:11
|
|
Fix all -Wsign-compare warnings
i.e comparison of signed and unsigned values. These are mostly
harmless but fixing them allows to compile cleanly with -Wextra.
Signed-off-by: Ran Benita <ran234@gmail.com>
|
|
|
731e5c40
|
2012-03-09T18:53:47
|
|
Stringify public name types
Ensure that all names under xkb_desc are strings, rather than atoms.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
|
|
|
0bb24c2d
|
2012-03-09T19:03:59
|
|
Introduce xkb_keysym_t type
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
|
|
|
ed5c6c17
|
2012-03-09T16:26:34
|
|
Remove geometry support, again
It still parses geometry, but happily throws it away.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
|
|
|
f3e4335f
|
2012-02-24T16:07:17
|
|
Fix all constness warnings
These are all trivial/obvious fixes which clear a bunch of warnings.
Signed-off-by: Ran Benita <ran234@gmail.com>
|
|
|
ead9d0cb
|
2012-02-15T11:49:10
|
|
Move include path from X11/extensions/ to xkbcommon/
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
|
|
e8798287
|
2010-10-08T15:33:18
|
|
Don't return a static buffer in public API
|
|
73ca959d
|
2010-09-27T16:05:52
|
|
Dead code removal and static markup
Signed-off-by: Adam Jackson <ajax@redhat.com>
|
|
|
be2bd661
|
2010-08-25T14:51:52
|
|
Pull in a few #defines from libxkbfile and lower kbproto requirement
|
|
|
3f0034a9
|
2010-07-02T11:50:01
|
|
Rename public entry points to lowercase and underscore
|
|
|
9f602686
|
2010-07-01T14:35:24
|
|
Pull in enough structs and defines from XKBstr.h to only need XKB.h
We want to move away from sharing implementation structs and let libX11
and libxkbcommon use each their own set of structs.
|
|
|
e10e16ad
|
2010-06-30T17:20:56
|
|
Constify XkbcAtomText()
Atoms aren't mutable and this lets us put tbGetBuffer() back in the box.
|
|
|
0ece2cdb
|
2010-06-30T16:56:24
|
|
Drop more malloc/free wrappers
|
|
|
47d3b396
|
2010-06-28T06:50:12
|
|
Drop CARD32 and Opaque types
|
|
|
60e7eeeb
|
2010-06-17T03:16:09
|
|
Use CARD32 instead of Atom, drag in XkbClientMapRec
On 64-bit architectures, XID varies in size between the server (always
32 bits), and non-server (always unsigned long) for some inexplicable
reason. Use CARD32 instead to avoid this horrible trap.
This involves dragging in XkbClientMapRec so we don't get stuck in the
KeySym trap.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
|
|
|
48baabeb
|
2010-06-15T19:30:30
|
|
Atoms: Avoid allocations in XkbAtomText()
XkbAtomGetString() returns a freshly-allocated string, whereas
XkbAtomText() returns the same in a temporary buffer. XkbAtomText used
to call XkbAtomGetString() and then free the result, which seems quite
spectacularly pointless when you think about it. Shuffle the atom code
around so we don't have to allocate for XkbAtomText().
This changes semantics slightly wrt non-printable characters, but I
haven't been able to see any effect so far. And it may well be ever so
slightly quicker.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
|
|
|
a0e180b0
|
2010-06-15T16:42:06
|
|
Expose tbGetBuffer to the rest of libxkbcommon
This will let us implement XkbAtomGetString on top of XkbAtomText,
instead of having the latter get a duplicated string, dump it into a
temporary buffer, and subsequently free it (sigh).
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
|
|
|
62eb167d
|
2009-04-25T14:51:46
|
|
XKB: Text: Use keysym <-> string conversion from keysym.c
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
|
|
6a84a34d
|
2009-04-08T07:46:25
|
|
Remove all non-public API from XKBcommon.h header
The noble intention was to expose all the new API and new generic types
in the split out kbproto headers through XKBcommon.h. It turns out that
would be a massive amount of work in the server. Someday, but first just
wedging in XkbCompileKeymap* would be good.
Most of the API is in new internal xkb*.h headers. In order to allow the
XKBcommon.h header to be used from the server, we can't pull in other
headers from kbproto since the server has its own copies. However, types
that are different (XkbDescRec, XkbAction) still have Xkbc equivalents
here, and I think they should be used in the server.
|
|
|
a53b9b1e
|
2009-03-28T15:32:51
|
|
Add XkbModIndexText replacement
Now, I think we should have all the *Text functions we need.
|
|
|
54aea7fe
|
2009-03-28T15:12:30
|
|
Add VMod Text functions from xkbfile
|
|
|
2671b777
|
2009-03-28T14:06:26
|
|
Add more *Text functions from xkbfile
This should cover all the usage in xkbcomp. The format arguments were
dropped except for the special case of XkbModMaskText, which needs to
write in XkbCFile format in HandleVModDef. This was just changed to a
Bool to avoid the need for the macros in XKBfile.h.
The function prefixes have been renamed to be unique from xkbfile.
|
|
|
72df9bb3
|
2009-03-28T06:32:08
|
|
Move *Text APIs into libxkbcommon
These seem like they might be generally useful, and more will be needed
from xkbfile.
|