|
920cc270
|
2012-06-06T00:39:23
|
|
symbols: use darray for KeyInfo symsMapIndex
Signed-off-by: Ran Benita <ran234@gmail.com>
|
|
e82b9b14
|
2012-06-05T19:25:23
|
|
symbols: remove sizeSyms array from KeyInfo
This information is kept inside the darray now.
Signed-off-by: Ran Benita <ran234@gmail.com>
|
|
4237a204
|
2012-06-05T19:09:01
|
|
symbols: use darray for KeyInfo syms array
The arrays found in KeyInfo are by far the most complicated, so this is
taken one member at a time so as not to break anything.
Signed-off-by: Ran Benita <ran234@gmail.com>
|
|
bc50cdd4
|
2012-06-05T18:46:24
|
|
darray: some changes for convenience
- Make darray_free also initialize the array back to an empty state, and
stop worrying about it everywhere.
- Add darray_mem, to access the underlying memory, which we do manually
now using &darray_item(arr, 0). This makes a bit more clear when we
actually mean to take the address of a specific item.
- Add darray_copy, to make a deep copy of a darray.
- Add darray_same, to test whether two darrays have the same underlying
memory (e.g. if the struct itself was value copied). This should used
where previously two arrays were compared for pointer equality.
Signed-off-by: Ran Benita <ran234@gmail.com>
|
|
d0718e98
|
2012-06-05T17:48:08
|
|
test/dump: allow to run manually
Without the srcdir envvar (and a couple trivial changes).
Signed-off-by: Ran Benita <ran234@gmail.com>
|
|
9baf62f3
|
2012-05-20T20:51:50
|
|
Remove configure check for X11 keysym files
Since every user building the library, even from git, doesn't need these
files anymore, there's no need to check for them (this goes for makekeys
as well).
The only remaining user is the update-keysyms target, but whoever will
run it again (if ever) will probably know what he's doing (at least
enough to run git diff before git commit). And the defaults should be
fine too.
Signed-off-by: Ran Benita <ran234@gmail.com>
|
|
57f184e2
|
2012-05-30T15:55:21
|
|
darray: tweak parameters a bit for better memory usage
Here are some quick numbers from valgrind, running rulescomp only with a
simple, common "us,de" rule set:
before darray: cb047bb
total heap usage: 44,924 allocs, 44,924 frees, 3,162,342 bytes allocated
after darray: c87468e
total heap usage: 52,670 allocs, 52,670 frees, 2,844,517 bytes allocated
tweaking specific inital allocation sizes:
total heap usage: 52,652 allocs, 52,652 frees, 2,841,814 bytes allocated
changing initial alloc = 2 globally
total heap usage: 47,802 allocs, 47,802 frees, 2,833,614 bytes allocated
changing initial alloc = 3 globally
total heap usage: 47,346 allocs, 47,346 frees, 3,307,110 bytes allocated
changing initial alloc = 4 globally
total heap usage: 44,643 allocs, 44,643 frees, 2,853,646 bytes allocated
[ Changing the geometric progression constant from 2 only made things
worse. I tried the golden ratio - not so golden :) ]
The last one is obviously the best, so it was chosen, with the specific
tweaks thrown in as well (these were there before but don't make much
difference). Overall it seems to do better than the previous manual
allocations which is a bit surprising.
Signed-off-by: Ran Benita <ran234@gmail.com>
|
|
58b030bb
|
2012-05-20T20:39:35
|
|
Move XKB_KEY_NoSymbol to xkbcommon-keysyms.h
This avoids a couple of special cases in the code, and is more
consistent. Since anyone who includes xkbcommon.h also gets
xkbcommon-keysyms.h, and anyone who include xkbcommon-keysyms.h would
want NoSymbol anyway, there's no down side.
Signed-off-by: Ran Benita <ran234@gmail.com>
|
|
1c27bb8e
|
2012-06-06T00:19:48
|
|
Update .gitignore
Signed-off-by: Ran Benita <ran234@gmail.com>
|
|
93ef2560
|
2012-06-08T09:54:08
|
|
Comment out unused fields in xkb_controls
Until (if) we implement/use them the should take up any (mental) space.
Signed-off-by: Ran Benita <ran234@gmail.com>
|
|
cb631c2d
|
2012-06-08T09:25:38
|
|
Unconstify a few string struct fields
These were made const when the structs were exposed in the API. Now they
are private and we shouldn't mess around with the UNCONSTIFY business.
Signed-off-by: Ran Benita <ran234@gmail.com>
|
|
6992de40
|
2012-06-08T14:54:31
|
|
Add keypad sequences to UTF-8 keysym printing
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
|
|
e0524296
|
2012-06-08T13:10:28
|
|
Add API for getting unicode representation of a keysym
This code uses a table and code derived from
http://www.cl.cam.ac.uk/~mgk25/ucs/keysym2ucs.c
The added API calls are:
xkb_keysym_to_utf32
xkb_keysym_to_utf8
[daniels: Changed API to be more in line with keysym_get_name, added
test, changed formatting to 4-space.]
|
|
77c909de
|
2012-06-04T16:16:20
|
|
Fix tiny memory leak in dump test
We forgot to free the path we'd allocated with asprintf.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
|
|
2e009f69
|
2012-06-04T16:15:10
|
|
Avoid duplicating keysyms for merge if possible
If we can merge cleanly (i.e. use the entirety of one entry rather than
having to go level by level), then just reuse the existing symbols array
and skip the entire merge process.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
|
|
d3dfd7de
|
2012-06-04T16:14:42
|
|
Use $(top_builddir) rather than relative paths
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
|
|
734be500
|
2012-06-04T14:06:01
|
|
Work around stupid automake dependency-tracking bug
bison/flex-generated objects, when being run in a VPATH build with
--disable-dependency-tracking (i.e. Gentoo), would fail to be created
because automake didn't bother creating the destination directories
before trying to create the objects.
Fix this by depending on the destination directory stamp, which
according to the automake mailing list, should hopefully remain fairly
stable.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
|
|
e6ca6fc5
|
2012-06-04T14:04:04
|
|
Fix action= NoAction() printing
Print it explicitly, rather than type=0x00, with all the private data
too.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
|
|
0f09c307
|
2012-06-04T13:27:41
|
|
Make xkb_map_get_as_string test more comprehensive
Add a test/dump.data file which contains the result we're expecting from
xkb_map_get_as_string run on a particularly complex set of keymaps, and
assert that the string representations are the same. This means that
any updates to xkb_map_get_as_string will also need to update the test
data, but should also ensure that we don't have any more parser
regressions.
Compared with diff to the output of setxkbmap + xkbcomp for the same
keymap; seems completely solid.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
|
|
64c277d9
|
2012-06-04T13:08:01
|
|
Revert "dump"
(Ahem.)
This reverts commit f43f75fb83e94224000ebc6b0736182546781c5e.
|
|
dd1ae1e4
|
2012-05-23T21:24:50
|
|
Remove fake support for global group range settings
A symbols file may contain a global, non key specific setting for
the group out-of-range handling method (wrap, clamp, redirect). Only
that:
* Its parsed and kept in the SymbolsInfo, but is not otherwise used in
any way (it's the same in the real xkbcomp).
* It's not used in any of xkeyboard-config files.
* It's not mentioned in the xkb specs (only the per-key ones).
* It doesn't make much sense anyway.
So remove the struct field, and emit an "unsupported, ignored" warning.
We don't increment the error count because of it, just continue (the
radio group warning just below is changed to do the same - there's no
reason to possibly abort the entire thing for it).
Signed-off-by: Ran Benita <ran234@gmail.com>
Conflicts:
src/xkbcomp/symbols.c
|
|
98b155c8
|
2012-06-04T13:01:33
|
|
Symbols: Don't include NoSymbols in the map
Instead of using NoSymbol in the map, we use num_syms == 0 to signify
the non-presence of a symbol. So instead of adding NoSymbol mappings
to the list regardless, detect them and set num_syms == 0.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
|
|
28e66a70
|
2012-06-04T12:54:54
|
|
Fix multiple errors when merging symbol definitions
We were getting the size calculation wrong, as well as inconsistently
picking a merge strategy.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
|
|
f43f75fb
|
2012-06-02T15:29:21
|
|
dump
|
|
f531d1e1
|
2012-06-02T15:25:36
|
|
keymap-dump: Print NoAction actions too
The failure mode here is a little irritating:
- server loads map with ISO_Lock action
- server dumps keymap to string, including:
interpret ISO_Lock+AnyOfOrAll(None) {
action= NoAction();
};
as we don't (yet) print ISO_Lock actions
- client parses keymap from string
- client dumps keymap to string, including:
interpret ISO_Lock+AnyOfOrAll(None) {
};
- this results in a syntax error
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
|
|
c87468e9
|
2012-05-29T16:15:07
|
|
stringcomp: NULL-terminate string
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
|
|
a3ae0e84
|
2012-05-29T16:12:54
|
|
Pass merge down through indicator creation
To avoid using potentially undefined memory.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
|
|
243daf80
|
2012-05-29T15:08:35
|
|
Add test for xkb_map_new_from_string
Using data from xkb_map_get_as_string.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
|
|
ebd397e1
|
2012-05-25T17:05:39
|
|
Add xkb_map_get_as_string
Returns a newly-allocated string representing the specified keymap.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
|
|
208d9578
|
2012-05-25T17:58:32
|
|
Fix signed vs. unsigned confusion in actions
Some actions could also take relative rather than absolute parameters,
so they really needed to be signed instead of explicitly unsigned.
Oops.
Fixes, e.g., action= MovePtr(x=-1,y=+1), which was reported as
(x=+65535,y=+1).
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
|
|
ccc047c4
|
2012-05-22T18:00:56
|
|
compat: use darray for acts and key_acts in the server map
Signed-off-by: Ran Benita <ran234@gmail.com>
|
|
89c5e886
|
2012-05-22T15:45:42
|
|
keycodes: use darray in KeyNamesInfo
Signed-off-by: Ran Benita <ran234@gmail.com>
|
|
07c88b55
|
2012-05-22T15:20:47
|
|
symbols: use darray for xkb_sym_map
Signed-off-by: Ran Benita <ran234@gmail.com>
|
|
4daa34b5
|
2012-05-22T14:18:48
|
|
keytypes: use darray for level names
Signed-off-by: Ran Benita <ran234@gmail.com>
|
|
ee990d53
|
2012-05-22T14:00:16
|
|
symbols: use darray for KeyInfo
Signed-off-by: Ran Benita <ran234@gmail.com>
|
|
dcdbd149
|
2012-05-22T12:24:54
|
|
parser: use darray for keysym list
Signed-off-by: Ran Benita <ran234@gmail.com>
|
|
c65a3596
|
2012-05-22T10:59:46
|
|
keytypes: use darray for xkb_kt_map_entry's
Signed-off-by: Ran Benita <ran234@gmail.com>
|
|
374b0c98
|
2012-05-22T08:39:09
|
|
alloc: use darray in xkb_key_names
Signed-off-by: Ran Benita <ran234@gmail.com>
|
|
c2ac3a2b
|
2012-05-22T08:07:52
|
|
keytypes: use darray for key types in the client map
Signed-off-by: Ran Benita <ran234@gmail.com>
|
|
56150416
|
2012-05-22T00:52:28
|
|
compat: use darray for sym_interprets
Signed-off-by: Ran Benita <ran234@gmail.com>
|
|
d0288bb2
|
2012-05-22T00:37:53
|
|
context: use darray for include paths
Signed-off-by: Ran Benita <ran234@gmail.com>
|
|
ef51b572
|
2012-05-22T00:26:58
|
|
atom: use darray for the node_table
Signed-off-by: Ran Benita <ran234@gmail.com>
|
|
0c271e09
|
2012-05-22T00:14:34
|
|
rules: use darray for input line
Signed-off-by: Ran Benita <ran234@gmail.com>
|
|
28bbb7dc
|
2012-05-21T23:47:44
|
|
rules: use darray for rules and groups
Signed-off-by: Ran Benita <ran234@gmail.com>
|
|
c815ff96
|
2012-05-21T23:33:56
|
|
Import darray.h for common dynamic array code
Signed-off-by: Ran Benita <ran234@gmail.com>
|
|
cb047bb0
|
2012-05-22T12:32:06
|
|
Constify a static variable
Signed-off-by: Ran Benita <ran234@gmail.com>
|
|
9e72a6a7
|
2012-05-22T08:04:59
|
|
Fix incorrect indexing while freeing
Signed-off-by: Ran Benita <ran234@gmail.com>
|
|
869c6871
|
2012-05-19T02:35:15
|
|
rules: add test
Add a non-extensive test to check that some basic things (e.g. rule
matching, var substitution, indexes and groups) work as expected.
Signed-off-by: Ran Benita <ran234@gmail.com>
|
|
68edd5f0
|
2012-05-19T12:50:47
|
|
rules: allow wildcard match against "" layout/varaint
Currently, if you pass in an rmlvo with an empty string for layout or
variant, it would not match layout and variant rules even with
wildcards. But if the rules file had set an appropriate default, and someone
passes in the empty string, than he should get the default.
NULL in this case signifies not wanting to match against the layout or
variant at all, and so the rule should still fail to match NULLs.
Signed-off-by: Ran Benita <ran234@gmail.com>
|
|
c900c417
|
2012-05-19T01:00:52
|
|
rules: remove struct var_defs
We can just use struct xkb_rule_names which we already receive as an
argument.
Signed-off-by: Ran Benita <ran234@gmail.com>
|
|
3d28b6d1
|
2012-05-19T00:53:57
|
|
rules: reformat components_from_rules
Signed-off-by: Ran Benita <ran234@gmail.com>
|
|
7895eeb8
|
2012-05-18T19:39:25
|
|
rules: reformat LoadRules and XkbRF_Free
Signed-off-by: Ran Benita <ran234@gmail.com>
|
|
d18cf315
|
2012-05-18T19:37:01
|
|
rules: remove unused struct describe_vars
It's not actually used for anything.
Signed-off-by: Ran Benita <ran234@gmail.com>
|
|
56b125fc
|
2012-05-18T18:38:06
|
|
rules: reformat AddRule and AddGroup
Signed-off-by: Ran Benita <ran234@gmail.com>
|
|
f790257f
|
2012-05-18T18:34:47
|
|
rules: reformat GetComponents
Signed-off-by: Ran Benita <ran234@gmail.com>
|
|
2df35895
|
2012-05-17T14:18:31
|
|
rules: reformat SetUpRemap and struct remap_spec
Rename to more descriptive names and reformat.
Signed-off-by: Ran Benita <ran234@gmail.com>
|
|
b8ae68c2
|
2012-05-17T13:55:38
|
|
rules: rewrite get_index to use sscanf
Signed-off-by: Ran Benita <ran234@gmail.com>
|
|
ef76ba97
|
2012-05-16T10:09:03
|
|
rules: don't typedef the structs and rename them
The long prefix is unnecessary now that they are all private.
Signed-off-by: Ran Benita <ran234@gmail.com>
|
|
478a6a31
|
2012-05-16T09:49:32
|
|
rules: reformat input line handling
Signed-off-by: Ran Benita <ran234@gmail.com>
|
|
72d1f2ed
|
2012-05-16T09:39:01
|
|
rules: don't use custom logging functions
Signed-off-by: Ran Benita <ran234@gmail.com>
|
|
b73bd676
|
2012-05-13T09:49:08
|
|
rules: only export a single function
Really all we need from this file is a way to get xkb_component_names
from an xkb_rule_names, which is now the only thing being exposed. This
should allow for some much needed refactoring of this code.
Since this is only used by xkbcomp.c and uses xkbcomp functions, also
move rules.{c,h} under the xkbcomp dir.
Signed-off-by: Ran Benita <ran234@gmail.com>
|
|
0c25ebf3
|
2012-05-11T10:04:26
|
|
rules: remove unused struct fields and use size_t
Signed-off-by: Ran Benita <ran234@gmail.com>
|
|
52939d4b
|
2012-05-18T18:25:59
|
|
rules: reformat SubstituteVars
Signed-off-by: Ran Benita <ran234@gmail.com>
|
|
a9477b57
|
2012-05-18T12:02:29
|
|
rules: reformat CheckApplyRules and ApplyPartialMatches
Signed-off-by: Ran Benita <ran234@gmail.com>
|
|
a47dd252
|
2012-05-18T10:43:24
|
|
rules: reformat CheckGroup and CheckApplyRule
Signed-off-by: Ran Benita <ran234@gmail.com>
|
|
18d331b8
|
2012-05-18T11:01:20
|
|
rules: rewrite MatchOneOf
Signed-off-by: Ran Benita <ran234@gmail.com>
|
|
c02c9ab2
|
2012-05-18T10:33:38
|
|
rules: reformat ApplyRule
Signed-off-by: Ran Benita <ran234@gmail.com>
|
|
06205717
|
2012-05-18T02:53:29
|
|
rules: reformat MakeMultiDefs
Signed-off-by: Ran Benita <ran234@gmail.com>
|
|
f7de6286
|
2012-05-18T02:20:14
|
|
rules: use asprintf instead of _Concat function
Signed-off-by: Ran Benita <ran234@gmail.com>
|
|
5f54764d
|
2012-05-17T16:15:46
|
|
rules: reformat CheckLine and break into several functions
And remove struct file_spec which is really unneeded. Should be
slightly more clear now.
Signed-off-by: Ran Benita <ran234@gmail.com>
|
|
beccc375
|
2012-05-18T18:09:50
|
|
Don't run the benchmark by default
For people running 'make check' on every compilation, this can be
a nuisance.
Signed-off-by: Ran Benita <ran234@gmail.com>
|
|
db3e8f2c
|
2012-05-13T10:14:10
|
|
Create path.h for the path.c functions
No need to stash them in xkbcomp-priv.h; files which need the functions
should explicitly include them.
Signed-off-by: Ran Benita <ran234@gmail.com>
|
|
b89b8e70
|
2012-05-13T23:31:59
|
|
Change xkb_map_new_from_fd to use FILE*
i.e. xkb_map_new_from_file. The reason is that flex only works with
FILE's, so we must use fdopen on the file descriptor; but to avoid a
memory leak, we must also fclose() it, which, in turn, closes the file
descriptor itself.
Either way is not acceptable, so we can either:
* dup() the fd and use fdopen on that, or
* have the user call fdopen on his own, and accept a FILE* instead of an
fd.
The second one seems better, and is standard C, so why not. We must add
stdio.h to xkbcommon.h though, which is regrettable, but not a big deal.
Signed-off-by: Ran Benita <ran234@gmail.com>
|
|
d15fa57a
|
2012-05-13T17:21:02
|
|
Remove FileHandler callback argument
It's unneeded; the same function is always passed.
Signed-off-by: Ran Benita <ran234@gmail.com>
|
|
e82bb5c0
|
2012-05-13T17:23:28
|
|
Remove unused allowNone from KeyInfo
Signed-off-by: Ran Benita <ran234@gmail.com>
|
|
5200132f
|
2012-05-13T23:13:10
|
|
Revert "Fix KeyInfo's syms array size calculation"
This partly reverts commit 8feba630fa7a4b720c42a9b5b4e4280b0e17a500.
This seems to fix valgrind errors:
==9581== Invalid read of size 4
==9581== at 0x4E50928: MergeKeyGroups (symbols.c:544)
==9581== by 0x4E510F3: MergeKeys (symbols.c:644)
==9581== by 0x4E514C6: AddKeySymbols (symbols.c:722)
==9581== by 0x4E51A3F: MergeIncludedSymbols (symbols.c:854)
==9581== by 0x4E51E97: HandleIncludeSymbols (symbols.c:952)
==9581== by 0x4E53D75: HandleSymbolsFile (symbols.c:1619)
==9581== by 0x4E55A0B: CompileSymbols (symbols.c:2187)
==9581== by 0x4E4056C: CompileKeymap (keymap.c:160)
==9581== by 0x4E56953: compile_keymap (xkbcomp.c:149)
==9581== by 0x4E56AC5: xkb_map_new_from_kccgst (xkbcomp.c:195)
==9581== by 0x4009D7: test_names (namescomp.c:56)
==9581== by 0x400A55: main (namescomp.c:75)
==9581== Address 0x5729b04 is 0 bytes after a block of size 4 alloc'd
==9581== at 0x4C29024: calloc (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
==9581== by 0x4E5C37B: recalloc (utils.c:41)
==9581== by 0x4E4FF50: ResizeKeyGroup (symbols.c:356)
==9581== by 0x4E5229E: AddSymbolsToKey (symbols.c:1058)
==9581== by 0x4E52ABB: SetSymbolsField (symbols.c:1214)
==9581== by 0x4E536C7: HandleSymbolsBody (symbols.c:1481)
==9581== by 0x4E53A63: HandleSymbolsDef (symbols.c:1543)
==9581== by 0x4E53DAD: HandleSymbolsFile (symbols.c:1623)
==9581== by 0x4E51CA4: HandleIncludeSymbols (symbols.c:909)
==9581== by 0x4E53D75: HandleSymbolsFile (symbols.c:1619)
==9581== by 0x4E51E74: HandleIncludeSymbols (symbols.c:951)
==9581== by 0x4E53D75: HandleSymbolsFile (symbols.c:1619)
Signed-off-by: Ran Benita <ran234@gmail.com>
|
|
75ff2cef
|
2012-05-13T18:45:43
|
|
Various static analyzer fixes
Signed-off-by: Ran Benita <ran234@gmail.com>
|
|
b571b834
|
2012-05-13T10:38:51
|
|
Fix a memleak
Introduced in 38cb639082ec4b31725d4ce4e35af63938691631.
Signed-off-by: Ran Benita <ran234@gmail.com>
|
|
ab82e0eb
|
2012-05-10T01:02:29
|
|
Fix configure check for xkbparse.c instead of parser.c
This obscure test is easy to miss.
Signed-off-by: Ran Benita <ran234@gmail.com>
|
|
8ca8f05a
|
2012-05-15T15:23:42
|
|
Add xkbcommon-uninstalled.pc
|
|
8bdef139
|
2012-05-15T15:23:41
|
|
Use eaccess() only if available
Fixes build on Android.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
|
|
cb804a9d
|
2012-05-15T15:23:40
|
|
Fix out-of-tree build for config.h
config.h appreas in the build dir, not src dir.
Signed-off-by: Pekka Paalanen <ppaalanen@gmail.com>
|
|
661cb840
|
2012-05-18T00:56:36
|
|
Add benchmarking test to rulescomp
Apparently it only takes us 8ms to build keymaps. Nice!
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
|
|
3fbc277b
|
2012-05-11T16:14:27
|
|
Use $(AM_V_GEN) to prettyfi makekeys step
|
|
7b00485a
|
2012-05-11T15:03:43
|
|
Rename 'ctx' back to 'context' in external API
Still keep things as 'ctx' internally so we don't have to worry about
typing it too often, but rename the user-visible API back as it was
kinda ugly.
This partially reverts e7bb1e5f.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
|
|
f95b4113
|
2012-05-11T14:28:54
|
|
Add xkbcommon-keysyms.h to Makefile.am
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
|
|
471e1122
|
2012-05-09T20:52:33
|
|
Document that xkb_state_get_map doesn't take a ref
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
|
|
7a1201bd
|
2012-05-09T20:51:37
|
|
Change xkb_key_get_syms to just return a bare int
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
|
|
46441b11
|
2012-05-09T20:49:04
|
|
Move KcCGST API to internal-only
And don't export it. We don't need it for X11 support, let alone
anything else.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
|
|
2761b1a3
|
2012-05-09T20:20:12
|
|
Rename serialise to serialize
Yes, British English is correct, but unfortunately we've lost that
battle.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
|
|
5a3771d1
|
2012-05-09T20:18:30
|
|
Add common LED names to xkbcommon-names.h
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
|
|
693d0578
|
2012-05-09T20:17:13
|
|
Include xkbcommon-names.h from xkbcommon.h
So clients only have one file to include.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
|
|
3e3ddd43
|
2012-05-09T20:12:18
|
|
Remove keycode_range_is_legal
It was a pretty pointless check. Also sanitise the _x11 variant to
actually do what it says on the box.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
|
|
6433d72e
|
2012-05-09T20:12:12
|
|
Merge remote-tracking branch 'krh/keysyms'
Conflicts:
src/keysym.c
src/misc.c
src/text.h
src/xkbcomp/expr.c
src/xkbcomp/parser.y
src/xkbcomp/parseutils.c
src/xkbcomp/symbols.c
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
|
|
ace1e5df
|
2012-05-09T09:05:00
|
|
Use our own keysyms
|
|
c6897d26
|
2012-05-09T08:33:04
|
|
Add XKB version of X11 keysyms
With this we're now completely standalone.
add vendor keysyms
|
|
5e59ef3f
|
2012-05-09T17:54:37
|
|
Remove support for xkb_layout and xkb_semantics file types
These are two aggregate file types which are not used anywhere. We
maintain useful-enough backward compatibility in the parser, by treating
them as xkb_keymap. The keymap type allows for all types of components,
so they will still compile fine if they ever come up.
Signed-off-by: Ran Benita <ran234@gmail.com>
|
|
e7bb1e5f
|
2012-05-09T15:03:11
|
|
Shorten context to ctx
(This breaks the API.)
"context" is really annoying to type all the time (and we're going to
type it a lot more :). "ctx" is clear, concise and common in many other
libraries. Use it!
Signed-off-by: Ran Benita <ran234@gmail.com>
[daniels: Fix for xkb -> keymap change.]
|
|
699a0b84
|
2012-05-09T14:02:26
|
|
Contextualize the atom table
Each context gets its own table, i.e. interning a string in one context
does not affect any other context.
The existing xkb_atom_* functions are turned into wrappers around a new
standalone atom_table object.
Signed-off-by: Ran Benita <ran234@gmail.com>
[daniels: Updated for xkb -> keymap.]
|
|
cdd2906d
|
2012-05-09T13:50:05
|
|
Make the context available for XkbcAtomText
And rename the function to xkb_atom_text.
Signed-off-by: Ran Benita <ran234@gmail.com>
[daniels: Updated for xkb -> keymap.]
|