thodg/cgminer

diff --git a/Makefile.am b/Makefile.am
index ae6b829..bc60361 100644
--- a/Makefile.am
+++ b/Makefile.am
@@ -97,9 +97,3 @@ cgminer_SOURCES += driver-modminer.c
 bitstreamsdir = $(bindir)/bitstreams
 dist_bitstreams_DATA = $(top_srcdir)/bitstreams/*
 endif
-
-if HAS_ZTEX
-cgminer_SOURCES += driver-ztex.c libztex.c libztex.h
-bitstreamsdir = $(bindir)/bitstreams
-dist_bitstreams_DATA = $(top_srcdir)/bitstreams/*
-endif
diff --git a/api.c b/api.c
index ea35710..166d65a 100644
--- a/api.c
+++ b/api.c
@@ -33,7 +33,7 @@
 #define HAVE_AN_ASIC 1
 #endif
 
-#if defined(USE_BITFORCE) || defined(USE_ICARUS) || defined(USE_ZTEX) || defined(USE_MODMINER)
+#if defined(USE_BITFORCE) || defined(USE_ICARUS) || defined(USE_MODMINER)
 #define HAVE_AN_FPGA 1
 #endif
 
@@ -185,9 +185,6 @@ static const char *DEVICECODE = ""
 #ifdef USE_AVALON
 			"AVA "
 #endif
-#ifdef USE_ZTEX
-			"ZTX "
-#endif
 #ifdef USE_MODMINER
 			"MMQ "
 #endif
@@ -1720,10 +1717,6 @@ static void pgastatus(struct io_data *io_data, int pga, bool isjson, bool precom
 		if (dev_runtime < 1.0)
 			dev_runtime = 1.0;
 
-#ifdef USE_ZTEX
-		if (cgpu->drv->drv_id == DRIVER_ztex && cgpu->device_ztex)
-			frequency = cgpu->device_ztex->freqM1 * (cgpu->device_ztex->freqM + 1);
-#endif
 #ifdef USE_MODMINER
 		if (cgpu->drv->drv_id == DRIVER_modminer)
 			frequency = cgpu->clock;
diff --git a/bitstreams/COPYING_ztex b/bitstreams/COPYING_ztex
deleted file mode 100644
index 99cd2ed..0000000
--- a/bitstreams/COPYING_ztex
+++ /dev/null
@@ -1,24 +0,0 @@
-All the bitstream files included in this directory that follow the name pattern ztex_*.bit are:
-
-----
-
-Copyright (C) 2009-2011 ZTEX GmbH.
-http://www.ztex.de
-
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License version 3 as
-published by the Free Software Foundation.
-
-This program is distributed in the hope that it will be useful, but
-WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, see http://www.gnu.org/licenses/.
-
-----
-
-You can find the original sources at the BTCMiner project home page: http://www.ztex.de/btcminer/
-
diff --git a/bitstreams/ztex_ufm1_15b1.bit b/bitstreams/ztex_ufm1_15b1.bit
deleted file mode 100644
index 4ed6f4c..0000000
Binary files a/bitstreams/ztex_ufm1_15b1.bit and /dev/null differ
diff --git a/bitstreams/ztex_ufm1_15d1.bit b/bitstreams/ztex_ufm1_15d1.bit
deleted file mode 100644
index b87eaf4..0000000
Binary files a/bitstreams/ztex_ufm1_15d1.bit and /dev/null differ
diff --git a/bitstreams/ztex_ufm1_15d3.bit b/bitstreams/ztex_ufm1_15d3.bit
deleted file mode 100644
index 78157a5..0000000
Binary files a/bitstreams/ztex_ufm1_15d3.bit and /dev/null differ
diff --git a/bitstreams/ztex_ufm1_15d4.bin b/bitstreams/ztex_ufm1_15d4.bin
deleted file mode 100644
index 411c172..0000000
Binary files a/bitstreams/ztex_ufm1_15d4.bin and /dev/null differ
diff --git a/bitstreams/ztex_ufm1_15d4.bit b/bitstreams/ztex_ufm1_15d4.bit
deleted file mode 100644
index 0951976..0000000
Binary files a/bitstreams/ztex_ufm1_15d4.bit and /dev/null differ
diff --git a/bitstreams/ztex_ufm1_15y1.bin b/bitstreams/ztex_ufm1_15y1.bin
deleted file mode 100644
index f1532f0..0000000
Binary files a/bitstreams/ztex_ufm1_15y1.bin and /dev/null differ
diff --git a/bitstreams/ztex_ufm1_15y1.bit b/bitstreams/ztex_ufm1_15y1.bit
deleted file mode 100644
index c9b38ae..0000000
Binary files a/bitstreams/ztex_ufm1_15y1.bit and /dev/null differ
diff --git a/cgminer.c b/cgminer.c
index 7f136cd..1e752be 100644
--- a/cgminer.c
+++ b/cgminer.c
@@ -75,8 +75,6 @@ char *curly = ":D";
 
 #if defined(USE_BITFORCE) || defined(USE_ICARUS) || defined(USE_AVALON) || defined(USE_MODMINER)
 #	define USE_FPGA
-#elif defined(USE_ZTEX)
-#	define USE_FPGA
 #endif
 
 struct strategies strategies[] = {
@@ -1598,9 +1596,6 @@ static char *opt_verusage_and_exit(const char *extra)
 #ifdef USE_SCRYPT
 		"scrypt "
 #endif
-#ifdef USE_ZTEX
-		"ztex "
-#endif
 		"mining support.\n"
 		, packagename);
 	printf("%s", opt_usage(opt_argv0, extra));
diff --git a/configure.ac b/configure.ac
index 9781f9d..ea0aa2d 100644
--- a/configure.ac
+++ b/configure.ac
@@ -297,17 +297,6 @@ if test "x$modminer" = xyes; then
 fi
 AM_CONDITIONAL([HAS_MODMINER], [test x$modminer = xyes])
 
-ztex="no"
-
-AC_ARG_ENABLE([ztex],
-	[AC_HELP_STRING([--enable-ztex],[Compile support for Ztex (default disabled)])],
-	[ztex=$enableval]
-	)
-if test "x$ztex" = xyes; then
-	AC_DEFINE([USE_ZTEX], [1], [Defined to 1 if Ztex support is wanted])
-fi
-AM_CONDITIONAL([HAS_ZTEX], [test x$ztex = xyes])
-
 curses="auto"
 
 AC_ARG_WITH([curses],
@@ -338,7 +327,7 @@ else
 	want_usbutils=false
 fi
 
-AM_CONDITIONAL([NEED_FPGAUTILS], [test x$modminer$ztex != xnono])
+AM_CONDITIONAL([NEED_FPGAUTILS], [test x$modminer != xno])
 AM_CONDITIONAL([WANT_USBUTILS], [test x$want_usbutils != xfalse])
 AM_CONDITIONAL([HAVE_CURSES], [test x$curses = xyes])
 AM_CONDITIONAL([HAVE_WINDOWS], [test x$have_win32 = xtrue])
@@ -504,14 +493,14 @@ if test "x$opencl" != xno; then
 
 	else
 		echo "  OpenCL...............: NOT FOUND. GPU mining support DISABLED"
-		if test "x$avalon$bitforce$bitfury$icarus$ztex$modminer$bflsc$klondike" = xnononononononono; then
+		if test "x$avalon$bitforce$bitfury$icarus$modminer$bflsc$klondike" = xnonononononono; then
 			AC_MSG_ERROR([No mining configured in])
 		fi
 		echo "  scrypt...............: Disabled (needs OpenCL)"
 	fi
 else
 	echo "  OpenCL...............: Detection overrided. GPU mining support DISABLED"
-	if test "x$avalon$bitforce$bitfury$icarus$ztex$modminer$bflsc$klondike" = xnononononononono; then
+	if test "x$avalon$bitforce$bitfury$icarus$modminer$bflsc$klondike" = xnonononononono; then
 		AC_MSG_ERROR([No mining configured in])
 	fi
 	echo "  scrypt...............: Disabled (needs OpenCL)"
@@ -570,12 +559,6 @@ else
 	echo "  ModMiner.FPGAs.......: Disabled"
 fi
 
-if test "x$ztex" = xyes; then
-	echo "  Ztex.FPGAs...........: Enabled"
-else
-	echo "  Ztex.FPGAs...........: Disabled"
-fi
-
 echo
 echo "Compilation............: make (or gmake)"
 echo "  CPPFLAGS.............: $CPPFLAGS"
@@ -586,4 +569,3 @@ echo
 echo "Installation...........: make install (as root if needed, with 'su' or 'sudo')"
 echo "  prefix...............: $prefix"
 echo
-
diff --git a/driver-ztex.c b/driver-ztex.c
deleted file mode 100644
index ee0c0a9..0000000
--- a/driver-ztex.c
+++ /dev/null
@@ -1,423 +0,0 @@
-/**
- *   ztex.c - cgminer worker for Ztex 1.15x fpga board
- *
- *   Copyright (c) 2012 nelisky.btc@gmail.com
- *
- *   This work is based upon the Java SDK provided by ztex which is
- *   Copyright (C) 2009-2011 ZTEX GmbH.
- *   http://www.ztex.de
- *
- *   This work is based upon the icarus.c worker which was
- *   Copyright 2012 Luke Dashjr
- *   Copyright 2012 Xiangfu <xiangfu@openmobilefree.com>
- *
- *   This program is free software; you can redistribute it and/or modify
- *   it under the terms of the GNU General Public License version 2 as
- *   published by the Free Software Foundation.
- *
- *   This program is distributed in the hope that it will be useful, but
- *   WITHOUT ANY WARRANTY; without even the implied warranty of
- *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- *   General Public License for more details.
- *
- *   You should have received a copy of the GNU General Public License
- *   along with this program; if not, see http://www.gnu.org/licenses/.
-**/
-#include "miner.h"
-#include <unistd.h>
-#include <sha2.h>
-#include "libztex.h"
-#include "util.h"
-
-#define GOLDEN_BACKLOG 5
-
-// Forward declarations
-static void ztex_disable(struct thr_info* thr);
-static bool ztex_prepare(struct thr_info *thr);
-
-static void ztex_selectFpga(struct libztex_device* ztex)
-{
-	if (ztex->root->numberOfFpgas > 1) {
-		if (ztex->root->selectedFpga != ztex->fpgaNum)
-			mutex_lock(&ztex->root->mutex);
-		libztex_selectFpga(ztex);
-	}
-}
-
-static void ztex_releaseFpga(struct libztex_device* ztex)
-{
-	if (ztex->root->numberOfFpgas > 1) {
-		ztex->root->selectedFpga = -1;
-		mutex_unlock(&ztex->root->mutex);
-	}
-}
-
-static void ztex_detect(bool __maybe_unused hotplug)
-{
-	int cnt;
-	int i,j;
-	int fpgacount;
-	struct libztex_dev_list **ztex_devices;
-	struct libztex_device *ztex_slave;
-	struct cgpu_info *ztex;
-
-	cnt = libztex_scanDevices(&ztex_devices);
-	if (cnt > 0)
-		applog(LOG_WARNING, "Found %d ztex board%s", cnt, cnt > 1 ? "s" : "");
-
-	for (i = 0; i < cnt; i++) {
-		ztex = calloc(1, sizeof(struct cgpu_info));
-		ztex->drv = &ztex_drv;
-		ztex->device_ztex = ztex_devices[i]->dev;
-		ztex->threads = 1;
-		ztex->device_ztex->fpgaNum = 0;
-		ztex->device_ztex->root = ztex->device_ztex;
-		add_cgpu(ztex);
-
-		fpgacount = libztex_numberOfFpgas(ztex->device_ztex);
-
-		if (fpgacount > 1)
-			pthread_mutex_init(&ztex->device_ztex->mutex, NULL);
-
-		for (j = 1; j < fpgacount; j++) {
-			ztex = calloc(1, sizeof(struct cgpu_info));
-			ztex->drv = &ztex_drv;
-			ztex_slave = calloc(1, sizeof(struct libztex_device));
-			memcpy(ztex_slave, ztex_devices[i]->dev, sizeof(struct libztex_device));
-			ztex->device_ztex = ztex_slave;
-			ztex->threads = 1;
-			ztex_slave->fpgaNum = j;
-			ztex_slave->root = ztex_devices[i]->dev;
-			ztex_slave->repr[strlen(ztex_slave->repr) - 1] = ('1' + j);
-			add_cgpu(ztex);
-		}
-
-		applog(LOG_WARNING,"%s: Found Ztex (fpga count = %d) , mark as %d", ztex->device_ztex->repr, fpgacount, ztex->device_id);
-	}
-
-	if (cnt > 0)
-		libztex_freeDevList(ztex_devices);
-}
-
-static bool ztex_updateFreq(struct libztex_device* ztex)
-{
-	int i, maxM, bestM;
-	double bestR, r;
-
-	for (i = 0; i < ztex->freqMaxM; i++)
-		if (ztex->maxErrorRate[i + 1] * i < ztex->maxErrorRate[i] * (i + 20))
-			ztex->maxErrorRate[i + 1] = ztex->maxErrorRate[i] * (1.0 + 20.0 / i);
-
-	maxM = 0;
-	while (maxM < ztex->freqMDefault && ztex->maxErrorRate[maxM + 1] < LIBZTEX_MAXMAXERRORRATE)
-		maxM++;
-	while (maxM < ztex->freqMaxM && ztex->errorWeight[maxM] > 150 && ztex->maxErrorRate[maxM + 1] < LIBZTEX_MAXMAXERRORRATE)
-		maxM++;
-
-	bestM = 0;
-	bestR = 0;
-	for (i = 0; i <= maxM; i++) {
-		r = (i + 1 + (i == ztex->freqM? LIBZTEX_ERRORHYSTERESIS: 0)) * (1 - ztex->maxErrorRate[i]);
-		if (r > bestR) {
-			bestM = i;
-			bestR = r;
-		}
-	}
-
-	if (bestM != ztex->freqM) {
-		ztex_selectFpga(ztex);
-		libztex_setFreq(ztex, bestM);
-		ztex_releaseFpga(ztex);
-	}
-
-	maxM = ztex->freqMDefault;
-	while (maxM < ztex->freqMaxM && ztex->errorWeight[maxM + 1] > 100)
-		maxM++;
-	if ((bestM < (1.0 - LIBZTEX_OVERHEATTHRESHOLD) * maxM) && bestM < maxM - 1) {
-		ztex_selectFpga(ztex);
-		libztex_resetFpga(ztex);
-		ztex_releaseFpga(ztex);
-		applog(LOG_ERR, "%s: frequency drop of %.1f%% detect. This may be caused by overheating. FPGA is shut down to prevent damage.",
-		       ztex->repr, (1.0 - 1.0 * bestM / maxM) * 100);
-		return false;
-	}
-	return true;
-}
-
-
-static uint32_t ztex_checkNonce(struct work *work, uint32_t nonce)
-{
-	uint32_t *data32 = (uint32_t *)(work->data);
-	unsigned char swap[80];
-	uint32_t *swap32 = (uint32_t *)swap;
-	unsigned char hash1[32];
-	unsigned char hash2[32];
-	uint32_t *hash2_32 = (uint32_t *)hash2;
-	int i;
-
-	swap32[76/4] = htonl(nonce);
-
-	for (i = 0; i < 76 / 4; i++)
-		swap32[i] = swab32(data32[i]);
-
-	sha256(swap, 80, hash1);
-	sha256(hash1, 32, hash2);
-
-	return htonl(hash2_32[7]);
-}
-
-static int64_t ztex_scanhash(struct thr_info *thr, struct work *work,
-                              __maybe_unused int64_t max_nonce)
-{
-	struct libztex_device *ztex;
-	unsigned char sendbuf[44];
-	int i, j, k;
-	uint32_t *backlog;
-	int backlog_p = 0, backlog_max;
-	uint32_t *lastnonce;
-	uint32_t nonce, noncecnt = 0;
-	bool overflow, found;
-	struct libztex_hash_data hdata[GOLDEN_BACKLOG];
-
-	if (thr->cgpu->deven == DEV_DISABLED)
-		return -1;
-
-	ztex = thr->cgpu->device_ztex;
-
-	memcpy(sendbuf, work->data + 64, 12);
-	memcpy(sendbuf + 12, work->midstate, 32);
-
-	ztex_selectFpga(ztex);
-	i = libztex_sendHashData(ztex, sendbuf);
-	if (i < 0) {
-		// Something wrong happened in send
-		applog(LOG_ERR, "%s: Failed to send hash data with err %d, retrying", ztex->repr, i);
-		cgsleep_ms(500);
-		i = libztex_sendHashData(ztex, sendbuf);
-		if (i < 0) {
-			// And there's nothing we can do about it
-			ztex_disable(thr);
-			applog(LOG_ERR, "%s: Failed to send hash data with err %d, giving up", ztex->repr, i);
-			ztex_releaseFpga(ztex);
-			return -1;
-		}
-	}
-	ztex_releaseFpga(ztex);
-
-	applog(LOG_DEBUG, "%s: sent hashdata", ztex->repr);
-
-	lastnonce = calloc(1, sizeof(uint32_t)*ztex->numNonces);
-	if (lastnonce == NULL) {
-		applog(LOG_ERR, "%s: failed to allocate lastnonce[%d]", ztex->repr, ztex->numNonces);
-		return -1;
-	}
-
-	/* Add an extra slot for detecting dupes that lie around */
-	backlog_max = ztex->numNonces * (2 + ztex->extraSolutions);
-	backlog = calloc(1, sizeof(uint32_t) * backlog_max);
-	if (backlog == NULL) {
-		applog(LOG_ERR, "%s: failed to allocate backlog[%d]", ztex->repr, backlog_max);
-		return -1;
-	}
-
-	overflow = false;
-	int count = 0;
-	int validNonces = 0;
-	double errorCount = 0;
-
-	applog(LOG_DEBUG, "%s: entering poll loop", ztex->repr);
-	while (!(overflow || thr->work_restart)) {
-		count++;
-
-		int sleepcount = 0;
-		while (thr->work_restart == 0 && sleepcount < 25) {
-			cgsleep_ms(10);
-			sleepcount += 1;
-		}
-
-		if (thr->work_restart) {
-			applog(LOG_DEBUG, "%s: New work detected", ztex->repr);
-			break;
-		}
-
-		ztex_selectFpga(ztex);
-		i = libztex_readHashData(ztex, &hdata[0]);
-		if (i < 0) {
-			// Something wrong happened in read
-			applog(LOG_ERR, "%s: Failed to read hash data with err %d, retrying", ztex->repr, i);
-			cgsleep_ms(500);
-			i = libztex_readHashData(ztex, &hdata[0]);
-			if (i < 0) {
-				// And there's nothing we can do about it
-				ztex_disable(thr);
-				applog(LOG_ERR, "%s: Failed to read hash data with err %d, giving up", ztex->repr, i);
-				free(lastnonce);
-				free(backlog);
-				ztex_releaseFpga(ztex);
-				return -1;
-			}
-		}
-		ztex_releaseFpga(ztex);
-
-		if (thr->work_restart) {
-			applog(LOG_DEBUG, "%s: New work detected", ztex->repr);
-			break;
-		}
-
-		ztex->errorCount[ztex->freqM] *= 0.995;
-		ztex->errorWeight[ztex->freqM] = ztex->errorWeight[ztex->freqM] * 0.995 + 1.0;
-
-		for (i = 0; i < ztex->numNonces; i++) {
-			nonce = hdata[i].nonce;
-			if (nonce > noncecnt)
-				noncecnt = nonce;
-			if (((0xffffffff - nonce) < (nonce - lastnonce[i])) || nonce < lastnonce[i]) {
-				applog(LOG_DEBUG, "%s: overflow nonce=%08x lastnonce=%08x", ztex->repr, nonce, lastnonce[i]);
-				overflow = true;
-			} else
-				lastnonce[i] = nonce;
-
-			if (ztex_checkNonce(work, nonce) != (hdata->hash7 + 0x5be0cd19)) {
-				applog(LOG_DEBUG, "%s: checkNonce failed for %08X", ztex->repr, nonce);
-
-				// do not count errors in the first 500ms after sendHashData (2x250 wait time)
-				if (count > 2) {
-					thr->cgpu->hw_errors++;
-					errorCount += (1.0 / ztex->numNonces);
-				}
-			}
-			else
-				validNonces++;
-
-
-			for (j=0; j<=ztex->extraSolutions; j++) {
-				nonce = hdata[i].goldenNonce[j];
-
-				if (nonce == ztex->offsNonces) {
-					continue;
-				}
-
-				// precheck the extraSolutions since they often fail
-				if (j > 0 && ztex_checkNonce(work, nonce) != 0) {
-					continue;
-				}
-
-				found = false;
-				for (k = 0; k < backlog_max; k++) {
-					if (backlog[k] == nonce) {
-						found = true;
-						break;
-					}
-				}
-				if (!found) {
-					applog(LOG_DEBUG, "%s: Share found N%dE%d", ztex->repr, i, j);
-					backlog[backlog_p++] = nonce;
-
-					if (backlog_p >= backlog_max)
-						backlog_p = 0;
-
-					work->blk.nonce = 0xffffffff;
-					submit_nonce(thr, work, nonce);
-					applog(LOG_DEBUG, "%s: submitted %08x", ztex->repr, nonce);
-				}
-			}
-		}
-	}
-
-	// only add the errorCount if we had at least some valid nonces or
-	// had no valid nonces in the last round
-	if (errorCount > 0.0) {
-		if (ztex->nonceCheckValid > 0 && validNonces == 0) {
-			applog(LOG_ERR, "%s: resetting %.1f errors", ztex->repr, errorCount);
-		}
-		else {
-			ztex->errorCount[ztex->freqM] += errorCount;
-		}
-	}
-
-	// remember the number of valid nonces for the check in the next round
-	ztex->nonceCheckValid = validNonces;
-
-	ztex->errorRate[ztex->freqM] = ztex->errorCount[ztex->freqM] /	ztex->errorWeight[ztex->freqM] * (ztex->errorWeight[ztex->freqM] < 100? ztex->errorWeight[ztex->freqM] * 0.01: 1.0);
-	if (ztex->errorRate[ztex->freqM] > ztex->maxErrorRate[ztex->freqM])
-		ztex->maxErrorRate[ztex->freqM] = ztex->errorRate[ztex->freqM];
-
-	if (!ztex_updateFreq(ztex)) {
-		// Something really serious happened, so mark this thread as dead!
-		free(lastnonce);
-		free(backlog);
-		
-		return -1;
-	}
-
-	applog(LOG_DEBUG, "%s: exit %1.8X", ztex->repr, noncecnt);
-
-	work->blk.nonce = 0xffffffff;
-
-	free(lastnonce);
-	free(backlog);
-
-	return noncecnt;
-}
-
-static void ztex_statline_before(char *buf, size_t bufsiz, struct cgpu_info *cgpu)
-{
-	if (cgpu->deven == DEV_ENABLED) {
-		tailsprintf(buf, bufsiz, "%s-%d | ", cgpu->device_ztex->snString, cgpu->device_ztex->fpgaNum+1);
-		tailsprintf(buf, bufsiz, "%0.1fMHz | ", cgpu->device_ztex->freqM1 * (cgpu->device_ztex->freqM + 1));
-	}
-}
-
-static bool ztex_prepare(struct thr_info *thr)
-{
-	struct cgpu_info *cgpu = thr->cgpu;
-	struct libztex_device *ztex = cgpu->device_ztex;
-
-	ztex_selectFpga(ztex);
-	if (libztex_configureFpga(ztex) != 0) {
-		libztex_resetFpga(ztex);
-		ztex_releaseFpga(ztex);
-		applog(LOG_ERR, "%s: Disabling!", thr->cgpu->device_ztex->repr);
-		thr->cgpu->deven = DEV_DISABLED;
-		return true;
-	}
-	ztex->freqM = ztex->freqMaxM+1;;
-	//ztex_updateFreq(ztex);
-	libztex_setFreq(ztex, ztex->freqMDefault);
-	ztex_releaseFpga(ztex);
-	applog(LOG_DEBUG, "%s: prepare", ztex->repr);
-	return true;
-}
-
-static void ztex_shutdown(struct thr_info *thr)
-{
-	if (thr->cgpu->device_ztex != NULL) {
-		if (thr->cgpu->device_ztex->fpgaNum == 0)
-			pthread_mutex_destroy(&thr->cgpu->device_ztex->mutex);  
-		applog(LOG_DEBUG, "%s: shutdown", thr->cgpu->device_ztex->repr);
-		libztex_destroy_device(thr->cgpu->device_ztex);
-		thr->cgpu->device_ztex = NULL;
-	}
-}
-
-static void ztex_disable(struct thr_info *thr)
-{
-	struct cgpu_info *cgpu;
-
-	applog(LOG_ERR, "%s: Disabling!", thr->cgpu->device_ztex->repr);
-	cgpu = get_devices(thr->cgpu->device_id);
-	cgpu->deven = DEV_DISABLED;
-	ztex_shutdown(thr);
-}
-
-struct device_drv ztex_drv = {
-	.drv_id = DRIVER_ztex,
-	.dname = "ztex",
-	.name = "ZTX",
-	.drv_detect = ztex_detect,
-	.get_statline_before = ztex_statline_before,
-	.thread_prepare = ztex_prepare,
-	.scanhash = ztex_scanhash,
-	.thread_shutdown = ztex_shutdown,
-};
-
diff --git a/libztex.c b/libztex.c
deleted file mode 100644
index 860a842..0000000
--- a/libztex.c
+++ /dev/null
@@ -1,915 +0,0 @@
-/**
- *   libztex.c - Ztex 1.15x/1.15y fpga board support library
- *
- *   Copyright (c) 2012 nelisky.btc@gmail.com
- *   Copyright (c) 2012 Denis Ahrens <denis@h3q.com>
- *   Copyright (c) 2012 Peter Stuge <peter@stuge.se>
- *
- *   This work is based upon the Java SDK provided by ztex which is
- *   Copyright (C) 2009-2011 ZTEX GmbH.
- *   http://www.ztex.de
- *
- *   This program is free software; you can redistribute it and/or modify
- *   it under the terms of the GNU General Public License version 2 as
- *   published by the Free Software Foundation.
- *
- *   This program is distributed in the hope that it will be useful, but
- *   WITHOUT ANY WARRANTY; without even the implied warranty of
- *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- *   General Public License for more details.
- *
- *   You should have received a copy of the GNU General Public License
- *   along with this program; if not, see http://www.gnu.org/licenses/.
-**/
-
-#include "config.h"
-
-#include <stdio.h>
-#include <unistd.h>
-#include <string.h>
-
-#include "miner.h"
-#include "fpgautils.h"
-#include "libztex.h"
-
-//* Capability index for EEPROM support.
-#define CAPABILITY_EEPROM 0,0
-//* Capability index for FPGA configuration support. 
-#define CAPABILITY_FPGA 0,1
-//* Capability index for FLASH memory support.
-#define CAPABILITY_FLASH 0,2
-//* Capability index for DEBUG helper support.
-#define CAPABILITY_DEBUG 0,3
-//* Capability index for AVR XMEGA support.
-#define CAPABILITY_XMEGA 0,4
-//* Capability index for AVR XMEGA support.
-#define CAPABILITY_HS_FPGA 0,5
-//* Capability index for AVR XMEGA support.
-#define CAPABILITY_MAC_EEPROM 0,6
-//* Capability index for multi FPGA support.
-#define CAPABILITY_MULTI_FPGA 0,7
-
-static int libztex_get_string_descriptor_ascii(libusb_device_handle *dev, uint8_t desc_index,
-		unsigned char *data, int length)
-{
-	int i, cnt;
-	uint16_t langid;
-	unsigned char buf[260];
-
-	/* We open code string descriptor retrieval and ASCII decoding here
-	 * in order to work around that libusb_get_string_descriptor_ascii()
-	 * in the FreeBSD libusb implementation hits a bug in ZTEX firmware,
-	 * where the device returns more bytes than requested, causing babble,
-	 * which makes FreeBSD return an error to us.
-	 *
-	 * Avoid the mess by doing it manually the same way as libusb-1.0.
-	 */
-
-	cnt = libusb_control_transfer(dev, LIBUSB_ENDPOINT_IN,
-	    LIBUSB_REQUEST_GET_DESCRIPTOR, (LIBUSB_DT_STRING << 8) | 0,
-	    0x0000, buf, sizeof(buf), 1000);
-	if (cnt < 0) {
-		applog(LOG_ERR, "%s: Failed to read LANGIDs: %d", __func__, cnt);
-		return cnt;
-	}
-
-	langid = libusb_le16_to_cpu(((uint16_t *)buf)[1]);
-
-	cnt = libusb_control_transfer(dev, LIBUSB_ENDPOINT_IN,
-	    LIBUSB_REQUEST_GET_DESCRIPTOR, (LIBUSB_DT_STRING << 8) | desc_index,
-	    langid, buf, sizeof(buf), 1000);
-	if (cnt < 0) {
-		applog(LOG_ERR, "%s: Failed to read string descriptor: %d", __func__, cnt);
-		return cnt;
-	}
-
-	/* num chars = (all bytes except bLength and bDescriptorType) / 2 */
-	for (i = 0; i <= (cnt - 2) / 2 && i < length-1; i++)
-		data[i] = buf[2 + i*2];
-
-	data[i] = 0;
-
-	return LIBUSB_SUCCESS;
-}
-
-enum check_result
-{
-	CHECK_ERROR,
-	CHECK_IS_NOT_ZTEX,
-	CHECK_OK,
-	CHECK_RESCAN,
-};
-
-static bool libztex_firmwareReset(struct libusb_device_handle *hndl, bool enable)
-{
-	uint8_t reset = enable;
-	int cnt = libusb_control_transfer(hndl, 0x40, 0xA0, 0xE600, 0, &reset, 1, 1000);
-	if (cnt < 0)
-	{
-		applog(LOG_ERR, "Ztex reset %d failed: %d", enable, cnt);
-		return 1;
-	}
-
-	return 0;
-}
-
-static enum check_result libztex_checkDevice(struct libusb_device *dev)
-{
-	FILE *fp = NULL;
-	libusb_device_handle *hndl = NULL;
-	struct libusb_device_descriptor desc;
-	int ret = CHECK_ERROR, err, cnt;
-	size_t got_bytes, length;
-	unsigned char buf[64], *fw_buf;
-	unsigned int i;
-
-	err = libusb_get_device_descriptor(dev, &desc);
-	if (unlikely(err != 0)) {
-		applog(LOG_ERR, "Ztex check device: Failed to open read descriptor with error %d", err);
-		return CHECK_ERROR;
-	}
-
-	if (desc.idVendor != LIBZTEX_IDVENDOR || desc.idProduct != LIBZTEX_IDPRODUCT) {
-		applog(LOG_DEBUG, "Not a ZTEX device %04x:%04x", desc.idVendor, desc.idProduct);
-		return CHECK_IS_NOT_ZTEX;
-	}
-
-	err = libusb_open(dev, &hndl);
-	if (err != LIBUSB_SUCCESS) {
-		applog(LOG_ERR, "%s: Can not open ZTEX device: %d", __func__, err);
-		goto done;
-	}
-
-	cnt = libusb_control_transfer(hndl, 0xc0, 0x22, 0, 0, buf, 40, 500);
-	if (unlikely(cnt < 0)) {
-		applog(LOG_ERR, "Ztex check device: Failed to read ztex descriptor with err %d", cnt);
-		goto done;
-	}
-
-	if (buf[0] != 40 || buf[1] != 1 || buf[2] != 'Z' || buf[3] != 'T' || buf[4] != 'E' || buf[5] != 'X') {
-		applog(LOG_ERR, "Ztex check device: Error reading ztex descriptor");
-		goto done;
-	}
-
-	if (buf[6] != 10)
-	{
-		ret = CHECK_IS_NOT_ZTEX;
-		goto done;
-	}
-
-	// 15 = 1.15y   13 = 1.15d or 1.15x
-	switch(buf[7])
-	{
-		case 13:
-			applog(LOG_ERR, "Found ztex board 1.15d or 1.15x");
-			break;
-		case 15:
-			applog(LOG_ERR, "Found ztex board 1.15y");
-			break;
-		default:
-			applog(LOG_ERR, "Found unknown ztex board");
-			ret = CHECK_IS_NOT_ZTEX;
-			goto done;
-	}
-
-	// testing for dummy firmware
-	if (buf[8] != 0) {
-		ret = CHECK_OK;
-		goto done;
-	}
-
-	applog(LOG_ERR, "Found dummy firmware, trying to send mining firmware");
-
-	char productString[32];
-
-	cnt = libztex_get_string_descriptor_ascii(hndl, desc.iProduct, (unsigned char*)productString, sizeof(productString));
-	if (unlikely(cnt < 0)) {
-		applog(LOG_ERR, "Ztex check device: Failed to read device productString with err %d", cnt);
-		return cnt;
-	}
-
-	applog(LOG_ERR, "productString: %s", productString);
-
-	unsigned char productID2 = buf[7];
-	char *firmware = NULL;
-
-	if (strcmp("USB-FPGA Module 1.15d (default)", productString) == 0 && productID2 == 13)
-	{
-		firmware = "ztex_ufm1_15d4.bin";
-	}
-	else if (strcmp("USB-FPGA Module 1.15x (default)", productString) == 0 && productID2 == 13)
-	{
-		firmware = "ztex_ufm1_15d4.bin";
-	}
-	else if (strcmp("USB-FPGA Module 1.15y (default)", productString) == 0 && productID2 == 15)
-	{
-		firmware = "ztex_ufm1_15y1.bin";
-	}
-
-	if (firmware == NULL)
-	{
-		applog(LOG_ERR, "could not figure out which firmware to use");
-		goto done;
-	}
-
-	applog(LOG_ERR, "Mining firmware filename: %s", firmware);
-
-	fp = open_bitstream("ztex", firmware);
-	if (!fp) {
-		applog(LOG_ERR, "failed to open firmware file '%s'", firmware);
-		goto done;
-	}
-
-	if (0 != fseek(fp, 0, SEEK_END)) {
-		applog(LOG_ERR, "Ztex firmware fseek: %s", strerror(errno));
-		goto done;
-	}
-
-	length = ftell(fp);
-	rewind(fp);
-	fw_buf = malloc(length);
-	if (!fw_buf) {
-		applog(LOG_ERR, "%s: Can not allocate memory: %s", __func__, strerror(errno));
-		goto done;
-	}
-
-	got_bytes = fread(fw_buf, 1, length, fp);
-	fclose(fp);
-	fp = NULL;
-
-	if (got_bytes < length) {
-		applog(LOG_ERR, "%s: Incomplete firmware read: %d/%d", __func__, (int)got_bytes, (int)length);
-		goto done;
-	}
-
-	// in buf[] is still the identifier of the dummy firmware
-	// use it to compare it with the new firmware
-	char *rv = memmem(fw_buf, got_bytes, buf, 8);
-	if (rv == NULL)
-	{
-		applog(LOG_ERR, "%s: found firmware is not ZTEX", __func__);
-		goto done;
-	}
-
-	// check for dummy firmware
-	if (rv[8] == 0)
-	{
-		applog(LOG_ERR, "%s: found a ZTEX dummy firmware", __func__);
-		goto done;
-	}
-
-	if (libztex_firmwareReset(hndl, true))
-		goto done;
-
-	for (i = 0; i < length; i+= 256) {
-		// firmware wants data in small chunks like 256 bytes
-		int numbytes = (length - i) < 256 ? (length - i) : 256;
-		int k = libusb_control_transfer(hndl, 0x40, 0xA0, i, 0, fw_buf + i, numbytes, 1000);
-		if (k < numbytes)
-		{
-			applog(LOG_ERR, "Ztex device: Failed to write firmware at %d with err: %d", i, k);
-			goto done;
-		}
-	}
-
-	if (libztex_firmwareReset(hndl, false))
-		goto done;
-
-	applog(LOG_ERR, "Ztex device: succesfully wrote firmware");
-	ret = CHECK_RESCAN;
-
-done:
-	if (fp)
-		fclose(fp);
-	if (hndl)
-		libusb_close(hndl);
-	return ret;
-}
-
-static bool libztex_checkCapability(struct libztex_device *ztex, int i, int j)
-{
-	if (!((i >= 0) && (i <= 5) && (j >= 0) && (j < 8) &&
-	     (((ztex->interfaceCapabilities[i] & 255) & (1 << j)) != 0))) {
-		applog(LOG_ERR, "%s: capability missing: %d %d", ztex->repr, i, j);
-		return false;
-	}
-	return true;
-}
-
-static char libztex_detectBitstreamBitOrder(const unsigned char *buf, int size)
-{
-	int i;
-
-	for (i = 0; i < size - 4; i++) {
-		if (((buf[i] & 255) == 0xaa) && ((buf[i + 1] & 255) == 0x99) && ((buf[i + 2] & 255) == 0x55) && ((buf[i + 3] & 255) == 0x66))
-			return 1;
-		if (((buf[i] & 255) == 0x55) && ((buf[i + 1] & 255) == 0x99) && ((buf[i + 2] & 255) == 0xaa) && ((buf[i + 3] & 255) == 0x66))
-			return 0;
-	} 
-	applog(LOG_WARNING, "Unable to determine bitstream bit order: no signature found");
-	return 0;
-}
-
-static void libztex_swapBits(unsigned char *buf, int size)
-{
-	unsigned char c;
-	int i;
-
-	for (i = 0; i < size; i++) {
-		c = buf[i];
-		buf[i] = ((c & 128) >> 7) |
-		         ((c & 64) >> 5) |
-		         ((c & 32) >> 3) |
-		         ((c & 16) >> 1) |
-		         ((c & 8) << 1) |
-		         ((c & 4) << 3) |
-		         ((c & 2) << 5) |
-		         ((c & 1) << 7);
-	}
-}
-
-static int libztex_getFpgaState(struct libztex_device *ztex, struct libztex_fpgastate *state)
-{
-	unsigned char buf[9];
-	int cnt;
-
-	if (!libztex_checkCapability(ztex, CAPABILITY_FPGA))
-		return -1;
-	cnt = libusb_control_transfer(ztex->hndl, 0xc0, 0x30, 0, 0, buf, 9, 1000);
-	if (unlikely(cnt < 0)) {
-		applog(LOG_ERR, "%s: Failed getFpgaState with err %d", ztex->repr, cnt);
-		return cnt;
-	}
-	state->fpgaConfigured = (buf[0] == 0);
-	state->fpgaChecksum = buf[1] & 0xff;
-	state->fpgaBytes = ((buf[5] & 0xff) << 24) | ((buf[4] & 0xff) << 16) | ((buf[3] & 0xff) << 8) | (buf[2] & 0xff);
-	state->fpgaInitB = buf[6] & 0xff;
-	state->fpgaFlashResult = buf[7];
-	state->fpgaFlashBitSwap = (buf[8] != 0);
-	return 0;
-}
-
-static int libztex_configureFpgaHS(struct libztex_device *ztex, const char* firmware, bool force, char bs)
-{
-	struct libztex_fpgastate state;
-	const int transactionBytes = 65536;
-	unsigned char buf[transactionBytes], settings[2];
-	int tries, cnt, err;
-	FILE *fp;
-
-	if (!libztex_checkCapability(ztex, CAPABILITY_HS_FPGA))
-		return -1;
-	libztex_getFpgaState(ztex, &state);
-	if (!force && state.fpgaConfigured) {
-		applog(LOG_INFO, "Bitstream already configured");
-		return 0;
-	}
-	cnt = libusb_control_transfer(ztex->hndl, 0xc0, 0x33, 0, 0, settings, 2, 1000);
-	if (unlikely(cnt < 0)) {
-		applog(LOG_ERR, "%s: Failed getHSFpgaSettings with err %d", ztex->repr, cnt);
-		return cnt;
-	}
-
-	err = libusb_claim_interface(ztex->hndl, settings[1]);
-	if (err != LIBUSB_SUCCESS) {
-		applog(LOG_ERR, "%s: failed to claim interface for hs transfer", ztex->repr);
-		return -4;
-	}
-
-	for (tries = 3; tries > 0; tries--) {
-		fp = open_bitstream("ztex", firmware);
-		if (!fp) {
-			applog(LOG_ERR, "%s: failed to read bitstream '%s'", ztex->repr, firmware);
-			libusb_release_interface(ztex->hndl, settings[1]);
-			return -2;
-		}
-
-		libusb_control_transfer(ztex->hndl, 0x40, 0x34, 0, 0, NULL, 0, 1000);
-		// 0x34 - initHSFPGAConfiguration
-
-		do
-		{
-			int length = fread(buf,1,transactionBytes,fp);
-
-			if (bs != 0 && bs != 1)
-				bs = libztex_detectBitstreamBitOrder(buf, length);
-			if (bs == 1)
-				libztex_swapBits(buf, length);
-
-			err = libusb_bulk_transfer(ztex->hndl, settings[0], buf, length, &cnt, 1000);
-			if (cnt != length)
-				applog(LOG_ERR, "%s: cnt != length", ztex->repr);
-			if (err != 0)
-				applog(LOG_ERR, "%s: Failed send hs fpga data", ztex->repr);
-		}
-		while (!feof(fp));
-
-		libusb_control_transfer(ztex->hndl, 0x40, 0x35, 0, 0, NULL, 0, 1000);
-		// 0x35 - finishHSFPGAConfiguration
-		if (cnt >= 0)
-			tries = 0;
-
-		fclose(fp);
-
-		libztex_getFpgaState(ztex, &state);
-		if (!state.fpgaConfigured) {
-			applog(LOG_ERR, "%s: HS FPGA configuration failed: DONE pin does not go high", ztex->repr);
-			libusb_release_interface(ztex->hndl, settings[1]);
-			return -3;
-		}
-	}
-
-	libusb_release_interface(ztex->hndl, settings[1]);
-
-	cgsleep_ms(200);
-	applog(LOG_INFO, "%s: HS FPGA configuration done", ztex->repr);
-	return 0;
-}
-
-static int libztex_configureFpgaLS(struct libztex_device *ztex, const char* firmware, bool force, char bs)
-{
-	struct libztex_fpgastate state;
-	const int transactionBytes = 2048;
-	unsigned char buf[transactionBytes];
-	int tries, cnt;
-	FILE *fp;
-
-	if (!libztex_checkCapability(ztex, CAPABILITY_FPGA))
-		return -1;
-
-	libztex_getFpgaState(ztex, &state);
-	if (!force && state.fpgaConfigured) {
-		applog(LOG_DEBUG, "Bitstream already configured");
-		return 0;
-	}
-
-	for (tries = 10; tries > 0; tries--) {
-		fp = open_bitstream("ztex", firmware);
-		if (!fp) {
-			applog(LOG_ERR, "%s: failed to read bitstream '%s'", ztex->repr, firmware);
-			return -2;
-		}
-
-		//* Reset fpga
-		cnt = libztex_resetFpga(ztex);
-		if (unlikely(cnt < 0)) {
-			applog(LOG_ERR, "%s: Failed reset fpga with err %d", ztex->repr, cnt);
-			continue;
-		}
-
-		do
-		{
-			int length = fread(buf, 1, transactionBytes, fp);
-
-			if (bs != 0 && bs != 1)
-				bs = libztex_detectBitstreamBitOrder(buf, length);
-			if (bs == 1)
-				libztex_swapBits(buf, length);
-			cnt = libusb_control_transfer(ztex->hndl, 0x40, 0x32, 0, 0, buf, length, 5000);
-			if (cnt != length)
-			{
-				applog(LOG_ERR, "%s: Failed send ls fpga data", ztex->repr);
-				break;
-			}
-		}
-		while (!feof(fp));
-
-		if (cnt > 0)
-			tries = 0;
-
-		fclose(fp);
-	}
-
-	libztex_getFpgaState(ztex, &state);
-	if (!state.fpgaConfigured) {
-		applog(LOG_ERR, "%s: LS FPGA configuration failed: DONE pin does not go high", ztex->repr);
-		return -3;
-	}
-
-	cgsleep_ms(200);
-	applog(LOG_INFO, "%s: FPGA configuration done", ztex->repr);
-	return 0;
-}
-
-int libztex_configureFpga(struct libztex_device *ztex)
-{
-	char buf[256];
-	int rv;
-
-	strcpy(buf, ztex->bitFileName);
-	strcat(buf, ".bit");
-	rv = libztex_configureFpgaHS(ztex, buf, true, 2);
-	if (rv != 0)
-		rv = libztex_configureFpgaLS(ztex, buf, true, 2);
-	return rv;
-}
-
-int libztex_numberOfFpgas(struct libztex_device *ztex)
-{
-	int cnt;
-	unsigned char buf[3];
-
-	if (ztex->numberOfFpgas < 0) {
-		if (libztex_checkCapability(ztex, CAPABILITY_MULTI_FPGA)) {
-			cnt = libusb_control_transfer(ztex->hndl, 0xc0, 0x50, 0, 0, buf, 3, 1000);
-			if (unlikely(cnt < 0)) {
-				applog(LOG_ERR, "%s: Failed getMultiFpgaInfo with err %d", ztex->repr, cnt);
-				return cnt;
-			}
-			ztex->numberOfFpgas = buf[0] + 1;
-			ztex->selectedFpga = -1;//buf[1];
-			ztex->parallelConfigSupport = (buf[2] == 1);
-		} else {
-			ztex->numberOfFpgas = 1;
-			ztex->selectedFpga = -1;//0;
-			ztex->parallelConfigSupport = false;
-		}
-	}
-	return ztex->numberOfFpgas;
-}
-
-int libztex_selectFpga(struct libztex_device *ztex)
-{
-	int cnt, fpgacnt = libztex_numberOfFpgas(ztex->root);
-	int16_t number = ztex->fpgaNum;
-
-	if (number < 0 || number >= fpgacnt) {
-		applog(LOG_WARNING, "%s: Trying to select wrong fpga (%d in %d)", ztex->repr, number, fpgacnt);
-		return 1;
-	}
-	if (ztex->root->selectedFpga != number && libztex_checkCapability(ztex->root, CAPABILITY_MULTI_FPGA)) {
-		cnt = libusb_control_transfer(ztex->root->hndl, 0x40, 0x51, (uint16_t)number, 0, NULL, 0, 500);
-		if (unlikely(cnt < 0)) {
-			applog(LOG_ERR, "Ztex check device: Failed to set fpga with err %d", cnt);
-			ztex->root->selectedFpga = -1;
-			return cnt;
-		}
-		ztex->root->selectedFpga = number;
-	}
-	return 0;
-}
-
-int libztex_setFreq(struct libztex_device *ztex, uint16_t freq)
-{
-	int cnt;
-	uint16_t oldfreq = ztex->freqM;
-
-	if (freq > ztex->freqMaxM)
-		freq = ztex->freqMaxM;
-
-	cnt = libusb_control_transfer(ztex->hndl, 0x40, 0x83, freq, 0, NULL, 0, 500);
-	if (unlikely(cnt < 0)) {
-		applog(LOG_ERR, "Ztex check device: Failed to set frequency with err %d", cnt);
-		return cnt;
-	}
-	ztex->freqM = freq;
-	if (oldfreq > ztex->freqMaxM) 
-		applog(LOG_WARNING, "%s: Frequency set to %0.1f MHz",
-		       ztex->repr, ztex->freqM1 * (ztex->freqM + 1));
-	else
-		applog(LOG_WARNING, "%s: Frequency change from %0.1f to %0.1f MHz",
-		       ztex->repr, ztex->freqM1 * (oldfreq + 1), ztex->freqM1 * (ztex->freqM + 1));
-
-	return 0;
-}
-
-int libztex_resetFpga(struct libztex_device *ztex)
-{
-	return libusb_control_transfer(ztex->hndl, 0x40, 0x31, 0, 0, NULL, 0, 1000);
-}
-
-int libztex_suspend(struct libztex_device *ztex)
-{
-	if (ztex->suspendSupported) {
-		return libusb_control_transfer(ztex->hndl, 0x40, 0x84, 0, 0, NULL, 0, 1000);
-	} else {
-		return 0;
-	}
-}
-
-int libztex_prepare_device(struct libusb_device *dev, struct libztex_device** ztex)
-{
-	struct libztex_device *newdev = *ztex;
-	int i, cnt, err;
-	unsigned char buf[64];
-
-	err = libusb_open(dev, &newdev->hndl);
-	if (err != LIBUSB_SUCCESS) {
-		applog(LOG_ERR, "%s: Can not open ZTEX device: %d", __func__, err);
-		return CHECK_ERROR;
-	}
-
-	err = libusb_get_device_descriptor(dev, &newdev->descriptor);
-	if (unlikely(err != 0)) {
-		applog(LOG_ERR, "Ztex check device: Failed to open read descriptor with error %d", err);
-		return CHECK_ERROR;
-	}
-
-	cnt = libztex_get_string_descriptor_ascii(newdev->hndl, newdev->descriptor.iSerialNumber, newdev->snString, sizeof(newdev->snString));
-	if (unlikely(cnt < 0)) {
-		applog(LOG_ERR, "Ztex check device: Failed to read device snString with err %d", cnt);
-		return cnt;
-	}
-
-	cnt = libusb_control_transfer(newdev->hndl, 0xc0, 0x22, 0, 0, buf, 40, 500);
-	if (unlikely(cnt < 0)) {
-		applog(LOG_ERR, "Ztex check device: Failed to read ztex descriptor with err %d", cnt);
-		return cnt;
-	}
-
-	if (buf[0] != 40 || buf[1] != 1 || buf[2] != 'Z' || buf[3] != 'T' || buf[4] != 'E' || buf[5] != 'X') {
-		applog(LOG_ERR, "Ztex check device: Error reading ztex descriptor");
-		return 2;
-	}
-
-	newdev->productId[0] = buf[6];
-	newdev->productId[1] = buf[7];
-	newdev->productId[2] = buf[8];
-	newdev->productId[3] = buf[9];
-	newdev->fwVersion = buf[10];
-	newdev->interfaceVersion = buf[11];
-	newdev->interfaceCapabilities[0] = buf[12];
-	newdev->interfaceCapabilities[1] = buf[13];
-	newdev->interfaceCapabilities[2] = buf[14];
-	newdev->interfaceCapabilities[3] = buf[15];
-	newdev->interfaceCapabilities[4] = buf[16];
-	newdev->interfaceCapabilities[5] = buf[17];
-	newdev->moduleReserved[0] = buf[18];
-	newdev->moduleReserved[1] = buf[19];
-	newdev->moduleReserved[2] = buf[20];
-	newdev->moduleReserved[3] = buf[21];
-	newdev->moduleReserved[4] = buf[22];
-	newdev->moduleReserved[5] = buf[23];
-	newdev->moduleReserved[6] = buf[24];
-	newdev->moduleReserved[7] = buf[25];
-	newdev->moduleReserved[8] = buf[26];
-	newdev->moduleReserved[9] = buf[27];
-	newdev->moduleReserved[10] = buf[28];
-	newdev->moduleReserved[11] = buf[29];
-
-	cnt = libusb_control_transfer(newdev->hndl, 0xc0, 0x82, 0, 0, buf, 64, 500);
-	if (unlikely(cnt < 0)) {
-		applog(LOG_ERR, "Ztex check device: Failed to read ztex descriptor with err %d", cnt);
-		return cnt;
-	}
-
-	if (unlikely(buf[0] != 5)) {
-		if (unlikely(buf[0] != 2 && buf[0] != 4)) {
-			applog(LOG_ERR, "Invalid BTCMiner descriptor version. Firmware must be updated (%d).", buf[0]);
-			return 3;
-		}
-		applog(LOG_WARNING, "Firmware out of date (%d).", buf[0]);
-	}
-
-	i = buf[0] > 4? 11: (buf[0] > 2? 10: 8);
-
-	while (cnt < 64 && buf[cnt] != 0)
-		cnt++;
-	if (cnt < i + 1) {
-		applog(LOG_ERR, "Invalid bitstream file name .");
-		return 4;
-	}
-
-	newdev->bitFileName = malloc(sizeof(char) * (cnt + 1));
-	memcpy(newdev->bitFileName, &buf[i], cnt);
-	newdev->bitFileName[cnt] = 0;	
-
-	newdev->numNonces = buf[1] + 1;
-	newdev->offsNonces = ((buf[2] & 255) | ((buf[3] & 255) << 8)) - 10000;
-	newdev->freqM1 = ((buf[4] & 255) | ((buf[5] & 255) << 8) ) * 0.01;
-	newdev->freqMaxM = (buf[7] & 255);
-	newdev->freqM = (buf[6] & 255);
-	newdev->freqMDefault = newdev->freqM;
-	newdev->suspendSupported = (buf[0] == 5);
-	newdev->hashesPerClock = buf[0] > 2? (((buf[8] & 255) | ((buf[9] & 255) << 8)) + 1) / 128.0: 1.0;
-	newdev->extraSolutions = buf[0] > 4? buf[10]: 0;
-
-	applog(LOG_DEBUG, "PID: %d numNonces: %d offsNonces: %d freqM1: %f freqMaxM: %d freqM: %d suspendSupported: %s hashesPerClock: %f extraSolutions: %d",
-	                 buf[0], newdev->numNonces, newdev->offsNonces, newdev->freqM1, newdev->freqMaxM, newdev->freqM, newdev->suspendSupported ? "T": "F", 
-	                 newdev->hashesPerClock, newdev->extraSolutions);
-
-	if (buf[0] < 4) {
-		if (strncmp(newdev->bitFileName, "ztex_ufm1_15b", 13) != 0)
-			newdev->hashesPerClock = 0.5;
-		applog(LOG_WARNING, "HASHES_PER_CLOCK not defined, assuming %0.2f", newdev->hashesPerClock);
-	}
-
-	for (cnt=0; cnt < 255; cnt++) {
-		newdev->errorCount[cnt] = 0;
-		newdev->errorWeight[cnt] = 0;
-		newdev->errorRate[cnt] = 0;
-		newdev->maxErrorRate[cnt] = 0;
-	}
-
-	// fake that the last round found something valid
-	newdev->nonceCheckValid = 1;
-
-	newdev->usbbus = libusb_get_bus_number(dev);
-	newdev->usbaddress = libusb_get_device_address(dev);
-	sprintf(newdev->repr, "ZTEX %s-1", newdev->snString);
-	return 0;
-}
-
-void libztex_destroy_device(struct libztex_device* ztex)
-{
-	if (ztex->hndl != NULL) {
-		libusb_close(ztex->hndl);
-		ztex->hndl = NULL;
-	}
-	if (ztex->bitFileName != NULL) {
-		free(ztex->bitFileName);
-		ztex->bitFileName = NULL;
-	}
-	free(ztex);
-}
-
-int libztex_scanDevices(struct libztex_dev_list*** devs_p)
-{
-	int usbdevices[LIBZTEX_MAX_DESCRIPTORS];
-	struct libztex_dev_list **devs = NULL;
-	struct libztex_device *ztex = NULL;
-	int found, max_found = 0, pos = 0, err, rescan, ret = 0;
-	libusb_device **list = NULL;
-	ssize_t cnt, i;
-
-	do {
-		cnt = libusb_get_device_list(NULL, &list);
-		if (unlikely(cnt < 0)) {
-			applog(LOG_ERR, "Ztex scan devices: Failed to list usb devices with err %d", (int)cnt);
-			goto done;
-		}
-
-		for (found = rescan = i = 0; i < cnt; i++) {
-			err = libztex_checkDevice(list[i]);
-			switch (err) {
-			case CHECK_ERROR:
-				applog(LOG_ERR, "Ztex: Can not check device: %d", err);
-				continue;
-			case CHECK_IS_NOT_ZTEX:
-				continue;
-			case CHECK_OK:
-				// Got one!
-				usbdevices[found++] = i;
-				break;
-			case CHECK_RESCAN:
-				rescan = 1;
-				found++;
-				break;
-			}
-		}
-
-		if (found < max_found)
-			rescan = 1;
-		else if (found > max_found)
-			max_found = found;
-
-		if (rescan)
-			libusb_free_device_list(list, 1);
-	} while (rescan);
-
-	if (0 == found)
-		goto done;
-
-	devs = malloc(sizeof(struct libztex_dev_list *) * found);
-	if (devs == NULL) {
-		applog(LOG_ERR, "Ztex scan devices: Failed to allocate memory");
-		goto done;
-	}
-
-	for (i = 0; i < found; i++) {
-		if (!ztex) {
-			ztex = malloc(sizeof(*ztex));
-			if (!ztex) {
-				applog(LOG_ERR, "%s: Can not allocate memory for device struct: %s", __func__, strerror(errno));
-				goto done;
-			}
-		}
-
-		ztex->bitFileName = NULL;
-		ztex->numberOfFpgas = -1;
-
-		err = libztex_prepare_device(list[usbdevices[i]], &ztex);
-		if (unlikely(err != 0)) {
-			applog(LOG_ERR, "prepare device: %d", err);
-			libztex_destroy_device(ztex);
-			ztex = NULL;
-			continue;
-		}
-
-		devs[pos] = malloc(sizeof(struct libztex_dev_list));
-		if (NULL == devs[pos]) {
-			applog(LOG_ERR, "%s: Can not allocate memory for device: %s", __func__, strerror(errno));
-			libztex_destroy_device(ztex);
-			ztex = NULL;
-			continue;
-		}
-
-		devs[pos]->dev = ztex;
-		ztex = NULL;
-		devs[pos]->next = NULL;
-		if (pos > 0)
-			devs[pos - 1]->next = devs[pos];
-		pos++;
-	}
-
-	ret = pos;
-
-done:
-	if (ret > 0)
-		*devs_p = devs;
-	else if (devs)
-		free(devs);
-	if (list)
-		libusb_free_device_list(list, 1);
-	return ret;
-}
-
-int libztex_sendHashData(struct libztex_device *ztex, unsigned char *sendbuf)
-{
-	int cnt = 0, ret, len;
-
-	if (ztex == NULL || ztex->hndl == NULL)
-		return 0;
-	ret = 44; len = 0;
-	while (ret > 0) {
-		cnt = libusb_control_transfer(ztex->hndl, 0x40, 0x80, 0, 0, sendbuf + len, ret, 1000);
-		if (cnt >= 0) {
-			ret -= cnt;
-			len += cnt;
-		} else
-			break;
-	}
-	if (unlikely(cnt < 0))
-		applog(LOG_ERR, "%s: Failed sendHashData with err %d", ztex->repr, cnt);
-
-	return cnt;
-}
-
-int libztex_readHashData(struct libztex_device *ztex, struct libztex_hash_data nonces[])
-{
-	int bufsize = 12 + ztex->extraSolutions * 4;
-	int cnt = 0, i, j, ret, len;
-	unsigned char *rbuf;
-
-	if (ztex->hndl == NULL)
-		return 0;
-
-	rbuf = malloc(sizeof(unsigned char) * (ztex->numNonces * bufsize));
-	if (rbuf == NULL) {
-		applog(LOG_ERR, "%s: Failed to allocate memory for reading nonces", ztex->repr);
-		return 0;
-	}
-	ret = bufsize * ztex->numNonces; len = 0;
-	while (ret > 0) {
-		cnt = libusb_control_transfer(ztex->hndl, 0xc0, 0x81, 0, 0, rbuf + len, ret, 1000);
-		if (cnt >= 0) {
-			ret -= cnt;
-			len += cnt;
-		} else
-			break;
-	}
-
-	if (unlikely(cnt < 0)) {
-		applog(LOG_ERR, "%s: Failed readHashData with err %d", ztex->repr, cnt);
-		free(rbuf);
-		return cnt;
-	}
-
-	for (i=0; i<ztex->numNonces; i++) {
-		memcpy((char*)&nonces[i].goldenNonce[0], &rbuf[i*bufsize], 4);
-		nonces[i].goldenNonce[0] -= ztex->offsNonces;
-		//applog(LOG_DEBUG, "W %d:0 %0.8x", i, nonces[i].goldenNonce[0]);
-
-		memcpy((char*)&nonces[i].nonce, &rbuf[(i*bufsize)+4], 4);
-		memcpy((char*)&nonces[i].hash7, &rbuf[(i*bufsize)+8], 4);
-
-		nonces[i].nonce = htole32(nonces[i].nonce);
-		nonces[i].hash7 = htole32(nonces[i].hash7);
-
-		nonces[i].nonce -= ztex->offsNonces;
-
-		for (j=0; j<ztex->extraSolutions; j++) {
-			memcpy((char*)&nonces[i].goldenNonce[j+1], &rbuf[(i*bufsize)+12+(j*4)], 4);
-			nonces[i].goldenNonce[j+1] = htole32(nonces[i].goldenNonce[j+1]);
-			nonces[i].goldenNonce[j+1] -= ztex->offsNonces;
-			//applog(LOG_DEBUG, "W %d:%d %0.8x", i, j+1, nonces[i].goldenNonce[j+1]);
-		}
-	}
-
-	free(rbuf);
-	return cnt;
-}
-
-void libztex_freeDevList(struct libztex_dev_list **devs)
-{
-	bool done = false;
-	ssize_t cnt = 0;
-
-	while (!done) {
-		if (devs[cnt]->next == NULL)
-			done = true;
-		free(devs[cnt++]);
-	}
-	free(devs);
-}
-
diff --git a/libztex.h b/libztex.h
deleted file mode 100644
index c1d09b6..0000000
--- a/libztex.h
+++ /dev/null
@@ -1,108 +0,0 @@
-/**
- *   libztex.h - headers for Ztex 1.15x fpga board support library
- *
- *   Copyright (c) 2012 nelisky.btc@gmail.com
- *
- *   This work is based upon the Java SDK provided by ztex which is
- *   Copyright (C) 2009-2011 ZTEX GmbH.
- *   http://www.ztex.de
- *
- *   This program is free software; you can redistribute it and/or modify
- *   it under the terms of the GNU General Public License version 2 as
- *   published by the Free Software Foundation.
- *
- *   This program is distributed in the hope that it will be useful, but
- *   WITHOUT ANY WARRANTY; without even the implied warranty of
- *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- *   General Public License for more details.
- *
- *   You should have received a copy of the GNU General Public License
- *   along with this program; if not, see http://www.gnu.org/licenses/.
-**/
-#ifndef __LIBZTEX_H__
-#define __LIBZTEX_H__
-
-#include <libusb.h>
-
-#define LIBZTEX_MAX_DESCRIPTORS 512
-#define LIBZTEX_SNSTRING_LEN 10
-
-#define LIBZTEX_IDVENDOR 0x221A
-#define LIBZTEX_IDPRODUCT 0x0100
-
-#define LIBZTEX_MAXMAXERRORRATE 0.05
-#define LIBZTEX_ERRORHYSTERESIS 0.1
-#define LIBZTEX_OVERHEATTHRESHOLD 0.4
-
-struct libztex_fpgastate {
-	bool fpgaConfigured;
-	unsigned char fpgaChecksum;
-	uint16_t fpgaBytes;
-	unsigned char fpgaInitB;
-	unsigned char fpgaFlashResult;
-	bool fpgaFlashBitSwap;
-};
-
-struct libztex_device {
-	pthread_mutex_t	mutex;
-	struct libztex_device *root;
-	int16_t fpgaNum;
-	struct libusb_device_descriptor descriptor;
-	libusb_device_handle *hndl; 
-	unsigned char usbbus;
-	unsigned char usbaddress;
-	unsigned char snString[LIBZTEX_SNSTRING_LEN+1];
-	unsigned char productId[4];
-	unsigned char fwVersion;
-	unsigned char interfaceVersion;
-	unsigned char interfaceCapabilities[6];
-	unsigned char moduleReserved[12];
-	uint8_t numNonces;
-	uint16_t offsNonces;
-	double freqM1;	
-	uint8_t freqM;
-	uint8_t freqMaxM;
-	uint8_t freqMDefault;
-	char* bitFileName;
-	bool suspendSupported;
-	double hashesPerClock;
-	uint8_t extraSolutions;
-
-	double errorCount[256];
-	double errorWeight[256];
-	double errorRate[256];
-	double maxErrorRate[256];
-
-	int16_t nonceCheckValid;
-
-	int16_t numberOfFpgas;
-	int selectedFpga;
-	bool parallelConfigSupport;
-	
-	char repr[20];
-};
-
-struct libztex_dev_list { 
-	struct libztex_device *dev;
-	struct libztex_dev_list *next;
-};
-
-struct libztex_hash_data {
-	uint32_t goldenNonce[2];
-	uint32_t nonce;
-	uint32_t hash7;
-};
-
-extern int libztex_scanDevices (struct libztex_dev_list ***devs);
-extern void libztex_freeDevList (struct libztex_dev_list **devs);
-extern int libztex_prepare_device (struct libusb_device *dev, struct libztex_device** ztex);
-extern void libztex_destroy_device (struct libztex_device* ztex);
-extern int libztex_configureFpga (struct libztex_device *dev);
-extern int libztex_setFreq (struct libztex_device *ztex, uint16_t freq);
-extern int libztex_sendHashData (struct libztex_device *ztex, unsigned char *sendbuf);
-extern int libztex_readHashData (struct libztex_device *ztex, struct libztex_hash_data nonces[]);
-extern int libztex_resetFpga (struct libztex_device *ztex);
-extern int libztex_selectFpga(struct libztex_device *ztex);
-extern int libztex_numberOfFpgas(struct libztex_device *ztex);
-
-#endif /* __LIBZTEX_H__ */
diff --git a/miner.h b/miner.h
index 6dab836..d2a408c 100644
--- a/miner.h
+++ b/miner.h
@@ -131,10 +131,6 @@ static inline int fsync (int fd)
   #include <libusb.h>
 #endif
 
-#ifdef USE_ZTEX
-  #include "libztex.h"
-#endif
-
 #ifdef USE_USBUTILS
   #include "usbutils.h"
 #endif
@@ -237,8 +233,7 @@ static inline int fsync (int fd)
 #define FPGA_PARSE_COMMANDS(DRIVER_ADD_COMMAND) \
 	DRIVER_ADD_COMMAND(bitforce) \
 	DRIVER_ADD_COMMAND(icarus) \
-	DRIVER_ADD_COMMAND(modminer) \
-	DRIVER_ADD_COMMAND(ztex)
+	DRIVER_ADD_COMMAND(modminer)
 
 #define ASIC_PARSE_COMMANDS(DRIVER_ADD_COMMAND) \
 	DRIVER_ADD_COMMAND(bflsc) \
@@ -466,14 +461,9 @@ struct cgpu_info {
 	char *name;
 	char *device_path;
 	void *device_data;
-	union {
-#ifdef USE_ZTEX
-		struct libztex_device *device_ztex;
-#endif
 #ifdef USE_USBUTILS
-		struct cg_usb_device *usbdev;
+	struct cg_usb_device *usbdev;
 #endif
-	};
 #ifdef USE_AVALON
 	struct work **works;
 	int work_array;
diff --git a/todo_ztex.txt b/todo_ztex.txt
deleted file mode 100644
index 4014b04..0000000
--- a/todo_ztex.txt
+++ /dev/null
@@ -1,5 +0,0 @@
-- verify setting cgpu.status=DEAD does in fact stop the thread
-- allow configuring bitstream directory
-- HS fpga config
-- allow configuring LIBZTEX_OVERHEATTHRESHOLD
-- hotplug support?
diff --git a/usbutils.c b/usbutils.c
index e2fa88b..d1bfef5 100644
--- a/usbutils.c
+++ b/usbutils.c
@@ -383,21 +383,6 @@ static struct usb_find_devices find_dev[] = {
 		.latency = LATENCY_STD,
 		INTINFO(cmr2_ints) },
 #endif
-#ifdef USE_ZTEX
-// This is here so cgminer -n shows them
-// the ztex driver (as at 201303) doesn't use usbutils
-	{
-		.drv = DRIVER_ztex,
-		.name = "ZTX",
-		.ident = IDENT_ZTX,
-		.idVendor = 0x221a,
-		.idProduct = 0x0100,
-		.config = 1,
-		.timeout = 100,
-		.latency = LATENCY_UNUSED,
-		.intinfo_count = 0,
-		.intinfos = NULL },
-#endif
 	{ DRIVER_MAX, NULL, 0, 0, 0, NULL, NULL, 0, 0, 0, 0, NULL }
 };