|
e811c4dc
|
2013-06-26T00:15:04
|
|
Add an avalon-auto option which enables dynamic overclocking based on hardware error rate for maximum effective hashrate.
|
|
|
9b45daba
|
2013-06-25T19:39:42
|
|
Add an --avalon-cutoff feature which puts the avalon idle should it reach this temperature, defaulting to 60, re-enabling it when it gets to target temperature.
|
|
|
ec4948d9
|
2013-06-25T12:22:57
|
|
Change default avalon target temperature to 50 degrees.
|
|
|
1fca632f
|
2013-06-24T11:04:02
|
|
Add an --avalon-temp option to allow a user specified target temperature.
|
|
|
6cc09aa1
|
2013-06-24T10:38:47
|
|
Make the fan control on the avalon a simple PID controller with a target temperature of 45.
|
|
|
a36e55b7
|
2013-06-21T17:39:26
|
|
Set the avalon preferred packet size to 512.
|
|
|
581afcf9
|
2013-06-21T11:18:00
|
|
Use only one cgsem in avalon signalling when the write thread should commit work by reading the status bytes off during an avalon_read, minimising the number of usb calls and resetting from only one place.
|
|
|
7c683cf2
|
2013-06-21T10:59:55
|
|
Use low latency usb transfers on the avalon, sleeping up to half a buffer's worth only if no data is returning to increase hashrate, abolish lost work and decrease CPU.
|
|
|
b59c3380
|
2013-06-06T13:08:00
|
|
Implement cgminer specific cgsem semaphores to imitate unnamed semaphore behaviour on osx which does not support them.
|
|
|
eec1a86a
|
2013-05-30T22:53:07
|
|
Update copyrights of modified files.
|
|
|
c0c5c060
|
2013-05-30T16:32:12
|
|
Provide some defaults for avalon if none are specified and do not try to claim the device if it fails to reset with them and no options are specified.
|
|
|
60bb463c
|
2013-05-29T11:45:47
|
|
Use semaphores to signal a reset to pause the read thread while the write thread does the actual reset, making all writes come from the same place.
|
|
|
772b354e
|
2013-05-28T23:59:07
|
|
Remove unneeded function and checks in avalon write code.
|
|
|
7748c469
|
2013-05-27T20:29:35
|
|
Make the avalon_read function parse the ftdi responses appopriately.
|
|
|
2a222ecf
|
2013-05-27T20:04:12
|
|
Use the avalon read timeout to completion if no data has been read.
|
|
|
a32e521d
|
2013-05-27T17:17:42
|
|
Implement avalon_ready and avalon_wait_ready functions for when usb is ready to receive commands.
|
|
|
269a8de9
|
2013-05-27T15:43:22
|
|
First pass rewriting serialdev into direct usb dev for avalon driver.
|
|
|
8fea60f3
|
2013-05-27T15:01:13
|
|
Define a cts equivalent for direct usb and use it for avalon driver full.
|
|
|
abfaf361
|
2013-05-27T12:30:13
|
|
Discard any reads obtained from the avalon get results thread during a reset.
|
|
|
c9ca6ca7
|
2013-05-26T16:15:10
|
|
Tighter control over work submissions in avalon allows us to use a smaller array.
|
|
|
66e27a10
|
2013-05-26T14:37:45
|
|
Move avalon read thread start till after conditional wait, store idle status in avalon_info and use it to determine whether an error is appropriate or not.
|
|
|
7cf154bf
|
2013-05-26T14:23:14
|
|
Use AVA_GETS_OK macro in avalon_read.
|
|
|
ebf88552
|
2013-05-26T14:18:21
|
|
Do all writes on avalon with a select() timeout to prevent indefinite blocking and loop if less than desired is written.
|
|
|
629feb5f
|
2013-05-26T13:16:19
|
|
Create a separate thread for handling all work and idle submission to the avalon which messages the scanhash function it has completed to update statistics.
|
|
|
74044467
|
2013-05-26T00:43:23
|
|
Created a threaded message parser for avalon reads.
|
|
|
569a6f65
|
2013-05-25T12:11:26
|
|
Do a non-blocking read of anything in the avalon buffer after opening the device.
|
|
|
6c5c6e99
|
2013-04-08T22:42:31
|
|
Reinstate the matching_work_count per subdevice on avalon based on the work subid.
|
|
|
0c35f67a
|
2013-04-08T15:36:18
|
|
Make the avalon array size a macro.
|
|
|
3671b2c3
|
2013-04-07T15:48:35
|
|
The read_count is unused by the avalon get result code and no longer required for avalon reset so simplify code removing it.
|
|
|
6752c247
|
2013-04-06T01:42:45
|
|
Remove unused per unit matching work count for avalon.
|
|
|
2f75a5d8
|
2013-04-06T01:03:21
|
|
Simplify avalon scanhash code using the new find_queued_work_bymidstate function. Partially works only.
|
|
|
71bae003
|
2013-04-05T14:52:07
|
|
First draft of port of avalon driver to new cgminer queued infrastructure.
|