Log

Author Commit Date CI Message
Con Kolivas 687c1705 2014-02-24T10:33:53 Add op name to hfa API stats output if it exists.
Con Kolivas a621e2b8 2014-02-24T09:54:23 Set the actual op_name in hfa devices if cgminer is choosing it itself due to it being invalid.
Con Kolivas 67041fbc 2014-02-24T09:00:53 Re-init an hfa device to its old data before setting up info structures as their sizes may change.
Con Kolivas c0e65369 2014-02-24T08:11:36 Remove the usb device whenever we do a running shutdown on hfa and do a shutdown as the imitated reinit to allow it to hotplug again.
Con Kolivas 6d33bf7e 2014-02-24T08:03:25 Reset opt hfa dfu boot after it's used.
Con Kolivas eb5ad60e 2014-02-24T08:02:25 Comment out windows only transfer on hfa startup.
Con Kolivas 2ab31317 2014-02-24T08:01:32 Clean up structures unused in case of all failures in hfa detect common
Con Kolivas fa7f84e6 2014-02-24T02:24:33 Clear all structures should we fail to hfa reset on adjusting clock on a hotplug.
Con Kolivas f832ce5b 2014-02-24T02:10:01 Set master and copy cgpu hash clock rate for hfa when dropping it on a restart.
Con Kolivas 8b0fb208 2014-02-24T02:00:44 Set the master hfa clock speed to lower when shutting down a copy.
Con Kolivas 9eaf90b2 2014-02-24T01:43:05 Do a clear readbuf on any hfa reset in case the device has not yet cleanly shut down.
Con Kolivas 33db33dd 2014-02-24T00:28:16 Increase hfa fanspeed slightly more when it's rising in the optimal range than falling.
Con Kolivas e0b857ce 2014-02-24T00:17:16 Always decrease hfa clock speed on a running shutdown and don't try sending an init frame since it will be dropped regardless.
Con Kolivas 66b18833 2014-02-23T23:58:02 Match hfa devices to old ones based on OP_NAME values before serial numbers if possible.
Con Kolivas 21fa38d5 2014-02-23T23:52:54 Read off the OP_NAME if it exists and is supported on hfa devices, setting it to the device serial number or a timestamp if it is invalid.
Con Kolivas 50fa5885 2014-02-23T22:56:14 Updated hf protocol
Con Kolivas d2f253cd 2014-02-23T22:42:15 Check for an amount along with no error in hfa clear readbuf
Con Kolivas f44831db 2014-02-23T22:39:17 Hfa clear readbuf can return a nonsense amount when there's a return error so ignore the amount.
Con Kolivas f1c6058c 2014-02-23T22:21:01 Running resets always cause a shutdown on hfa meaning the device will disappear with modern firmware so always kill off the threads to allow re-hotplugging.
Con Kolivas 7f74e21d 2014-02-23T22:09:28 Try a restart instead of a shutdown prior to trying to re-initialise a non-working hfa device.
Con Kolivas f3080422 2014-02-23T22:02:47 Reset the hfa hash clock rate to the old one if we find an old instance, only setting the device id in hfa_prepare
Con Kolivas 680a885a 2014-02-23T21:48:05 Keep the device_id on the original zombie thread for HFA in case of further resets.
Con Kolivas e022dc9f 2014-02-23T21:07:30 Local cinfo extra
Con Kolivas c22e080b 2014-02-23T20:56:40 Break out of hfa inherit if there is no device data.
Con Kolivas 94dcfce0 2014-02-23T20:52:42 Inherit the hfa zombie instance after the device id has been allocated.
Con Kolivas 19d0efd7 2014-02-23T20:31:04 The list_for_each_cgpu macro will dereference when there are no mining threads yet.
Con Kolivas db8c31c8 2014-02-23T20:21:36 Make hfa hotplug inherit some parameters from a previous instance if the serial number exists and is matching, avoiding dropping the clock on all devices.
Con Kolivas 3ed3cf33 2014-02-23T17:01:48 Per device last getwork won't work if the device stops asking for work.
Con Kolivas 35263e07 2014-02-23T16:48:50 Correct share work tdiff
Con Kolivas c76647f2 2014-02-23T16:45:04 Use the share_work_tdiff function in the driver watchdogs.
Con Kolivas e69f8447 2014-02-23T15:38:59 Provide a helper function for determining time between valid share and getwork per device.
Con Kolivas 4aceffc9 2014-02-23T15:35:39 Store last_getwork time on a per-device basis.
Con Kolivas 55cd36c1 2014-02-23T14:06:44 Limit the decrease of hfa clock rate on reset to the default clockrate.
Con Kolivas 0d32dc64 2014-02-23T14:04:34 Base the hfa failure time on the current expected hashrate instead of a static 15 seconds.
Con Kolivas 456e3dd0 2014-02-23T13:52:02 We shouldn't be trying to read from the hfa_send_shutdown function itself.
Con Kolivas 2b6a204e 2014-02-23T13:34:24 Reset the icarus failing flag only when a valid nonce is found.
Con Kolivas 870b4be9 2014-02-22T15:52:15 Transferred value is corrupt on a NODEV error in usbutils.
Con Kolivas 55c76d40 2014-02-22T15:50:24 Set each miner thread last valid work just before starting its hash loop in case there are delays at startup.
Con Kolivas bacd9008 2014-02-22T15:39:00 Only memcopy *transferred data in usbutils if we have received only success or a non-fatal error.
Con Kolivas 736f53f8 2014-02-22T11:35:06 Increase to 25 nonce ranges on icarus fail detect.
Con Kolivas f85646c7 2014-02-22T11:07:23 Set icarus device fail time to be dependent on device speed to avoid falsely detecting failure on slower AMU devices.
Con Kolivas d742560c 2014-02-22T10:56:09 Updated hf protocol header.
Con Kolivas 81fa250e 2014-02-22T10:55:09 Updated BE hf protocol header.
Con Kolivas 1c60a6df 2014-02-22T10:52:09 Revert "Restarts can rarely take a while on hashfast so increase the timeout to 1 second to avoid the usb flood failure." This reverts commit c8648adaa8c5d726412c59f49131762d3fce13ec.
Con Kolivas cf27324d 2014-02-22T10:51:29 Take into account shed cores on hfa devices when determining how many jobs to send.
Con Kolivas c8648ada 2014-02-21T14:56:34 Restarts can rarely take a while on hashfast so increase the timeout to 1 second to avoid the usb flood failure.
Con Kolivas c3f033de 2014-02-21T12:42:30 Bump major version to 4.0
Con Kolivas 5cc38abd 2014-02-21T12:47:00 Add USB menu to README
Con Kolivas 01455ee5 2014-02-21T12:39:19 Fix compilation error with two avalon types.
Con Kolivas c743f8da 2014-02-21T12:38:55 Fix missing A1 files from distribution.
Con Kolivas a72ca779 2014-02-21T12:05:33 Update NEWS for 4.0 release
Con Kolivas 279bcb69 2014-02-21T12:04:49 Check for error from setfloatval
Con Kolivas 6c488b16 2014-02-21T11:56:17 Halfdelay cannot be larger than 255.
Con Kolivas 832146ac 2014-02-21T11:52:19 Allow any arbitrary frequency to be specified for ANU devices and try to find the nearest frequency when initialising it, reporting if the frequency is not exactly as requested.
Con Kolivas ad0c4a4a 2014-02-21T10:16:07 Add USB faqs.
Con Kolivas cb03e71c 2014-02-21T09:45:17 Update READMEs for OSX regarding device limits.
Con Kolivas b7f71470 2014-02-21T08:07:25 Only show system libusb warning when appropriate during configure.
Con Kolivas b3b1ddff 2014-02-21T07:52:38 Merge branch 'avalon2' of https://github.com/xiangfu/cgminer into xiangfu-avalon2 Conflicts: api.c configure.ac
Con Kolivas 11e30ae0 2014-02-21T07:48:28 Add build essential to ubuntu build instructions
Con Kolivas bacdbd08 2014-02-21T07:45:42 Merge branch 'master' of github.com:ckolivas/cgminer
Con Kolivas f1c50a8e 2014-02-21T07:42:52 Hfa cooling remains satisfactory down to a minimum fanspeed of 5%
Con Kolivas 12528a64 2014-02-21T03:01:02 Merge pull request #522 from opsengine/patch-1 Add instructions to build on Ubuntu
Con Kolivas c9197a75 2014-02-21T02:44:09 Give a nodev error if we have already set nodev in hfa clear readbuf to avoid further usb comms attempts.
Con Kolivas a2f23e8f 2014-02-20T21:35:08 Fix missing include
Con Kolivas 020e896f 2014-02-20T21:34:16 Move bitmine options to alphabetic positioning.
Con Kolivas 1303ce36 2014-02-20T21:32:21 Merge pull request #551 from bitmine-ch/upstream.CCD Upstream.ccd
kanoi 0585c8d4 2014-02-20T21:16:17 Merge pull request #553 from kanoi/master bab - missed a few 'DEAD's in last commit
Kano eb0cbf06 2014-02-20T21:15:33 bab - missed a few 'DEAD's in last commit
kanoi a9d58282 2014-02-20T21:12:15 Merge pull request #552 from kanoi/master bab - roll work if possible to reduce CPU + dead->bad
Kano 006f97c5 2014-02-20T21:05:38 bab - use 'bad' instead of 'dead' as per the screen B:
Kano 1b64d381 2014-02-20T20:58:47 bab - roll work if possible to reduce CPU
Con Kolivas dab4a154 2014-02-20T20:30:36 Update the per die hash clock data on a running reset on hfa devices.
Con Kolivas 9aa6c6a2 2014-02-20T11:54:48 Set the per die clock on hfa to the known starting base clock instead of our requested clock rate.
Con Kolivas 3bbb8976 2014-02-20T11:35:02 Hfa device failure can be detected within 15 seconds so we should try restarting it sooner to avoid tripping the device's own watchdog.
Con Kolivas cca9b500 2014-02-20T11:29:43 Check return result of hfa clear readbuf to minimise error messages on device failure.
Con Kolivas 0501afe5 2014-02-20T11:22:22 Put MHz into cta statline description.
Con Kolivas f8571b60 2014-02-20T11:15:32 Send a work restart with every shutdown message to hfa devices to clear any work that might be stale on the next restart.
Con Kolivas 0f4ad7f4 2014-02-20T11:07:06 Store the hfa hash_clock rate and display it in the statline.
Con Kolivas 5b76a8b9 2014-02-20T11:02:56 Merge branch 'master' of github.com:ckolivas/cgminer
Con Kolivas 904491bf 2014-02-20T11:02:05 Store the maximum board temperature for hfa devices and take that into consideration when calculating the highest temperature as well as the dies.
Zefir Kurtisi 1448e151 2014-02-02T21:51:12 A1: CoinCraft-Desk driver variant The CoinCraft-Desk product includes up to 5 8-chip modules that are accessed over a TCA9539 IO multiplexer. This is the initial support for the CCD.
Zefir Kurtisi 60534e57 2013-12-24T00:33:42 Initial import of Bitmine.ch A1 SPI driver This initial driver was designed around an FPGA based emulator board which provides 2 chained chips with 4 hashing engines each, running at 10% of the A1's nominal speed. Driver has been tested on RasPi. Signed-off-by: Zefir Kurtisi <zefir.kurtisi@gmail.com>
kanoi 433f66e0 2014-02-19T16:58:51 Merge pull request #550 from kanoi/master avalon, bab, drillbit, klondike use more screen space
Kano 040284c6 2014-02-19T16:53:27 klondike ensure stats type matches
Kano 9829d279 2014-02-19T16:38:21 avalon, bab, drillbit, klondike use more screen space rather than truncating info
Con Kolivas 7dbfe297 2014-02-18T22:23:28 Add hashfast fanspeed% to statline display.
Con Kolivas 257fe00a 2014-02-18T22:19:45 Move driver statline padding to cgminer.c, expanding width of maximum displayable statistics and window width to add more info.
Con Kolivas 648be96f 2014-02-18T20:50:45 Prune old stratum shares that we've seen no response for over 2 minutes to avoid memory leaks for pools that don't respond about some shares.
Con Kolivas 83925612 2014-02-17T21:22:26 Add warning if system libusb is being added.
Con Kolivas 38fd3e91 2014-02-17T21:17:06 Only run ./configure with autogen.sh if extra parameters are passed to it.
Con Kolivas 6afe3087 2014-02-15T17:36:08 Updated cointerra features.
Con Kolivas cbe32574 2014-02-15T17:14:40 Add le16toh defines for platforms that may be missing it.
Con Kolivas 4365718f 2014-02-15T17:10:31 Remove modminer bitstreams from distribution and replace with a README saying what file needs to be added if modminer build is still desired.
Con Kolivas 3bb5b054 2014-02-15T16:56:08 Use the simplelog function from usb_list()
Con Kolivas 1ca3bf7e 2014-02-15T16:55:47 Add a simplelog function that does not log date and time.
Con Kolivas cd79fbd4 2014-02-15T16:51:32 Use a unique usb_list function displaying only pertinent information when listing usb devices from the menu.
Con Kolivas 71939319 2014-02-15T14:53:36 Abstract out the _in_use function to take different linked lists.
Con Kolivas 2108cceb 2014-02-15T14:45:58 Break out of linked list loop in remove_in_use in case we've gone over the whole list.
Con Kolivas 71849e0d 2014-02-15T09:04:47 Check for hfa invalid hash clockrate after other error messages.
Con Kolivas e9628dcd 2014-02-15T09:01:53 Merge branch 'master' of github.com:ckolivas/cgminer