driver-avalon.c


Log

Author Commit Date CI Message
Kano a9faec4a 2013-09-14T01:20:21 change drivers to use usb_interface() - required for multi interface change
Kano 87e5c76f 2013-08-23T22:52:30 BTB show C/MHz/mV for device
Con Kolivas c56d44ce 2013-08-21T21:00:57 Use stack data for HW error% in avalon stats.
Con Kolivas 8a01f532 2013-08-21T20:46:07 Add avalon HW error% to stats and only show BTB variables if avalon is a BTB.
Con Kolivas eeac9d81 2013-08-20T19:23:49 Replace all references to the old n*sleep functions with the equivalent cgsleep_*s replacements.
Kano 96c0c317 2013-08-19T20:34:37 BTB get version from Firmware
Con Kolivas 09e9091d 2013-08-19T13:54:56 Simplify cgsleep code for windows by using a typedef for cgtimer_t that resolves to clock resolution, using that internally.
Con Kolivas 17447ec7 2013-08-18T11:59:02 Use the cgsleep reentrant function in avalon_send_task.
Con Kolivas c988587b 2013-08-18T11:48:42 Use the reentrant cgsleep functions within the avalon_send_tasks function.
Con Kolivas e784b230 2013-08-18T11:02:05 Use the reentrant cgsleep function to time sleeps on reading from avalon.
Con Kolivas 37ff9f84 2013-08-18T01:33:50 Add necessary time header include to avalon driver.
Con Kolivas 1864ed26 2013-08-18T00:47:05 Do a sleep of the full duration it would take to do all the work using clock_nanosleep in avalon_send_tasks to avoid sleep overruns before polling to see if it's ready.
Con Kolivas fe7c8e82 2013-08-18T00:39:13 Merge branch 'master' of github.com:ckolivas/cgminer
Con Kolivas 33bb8c79 2013-08-18T00:28:30 Use the us_to_timeval helper function in the avalon driver.
Con Kolivas 53beae81 2013-08-18T00:21:01 Use timeval_to_spec helper in avalon driver.
Chris Chua 26de6e64 2013-08-17T16:18:12 simplifying buffer full check
Chris Chua 0b9474f3 2013-08-17T15:36:47 forking bitburner write thread function
Chris Chua be0d899b 2013-08-16T17:00:56 making sure original Avalon is unaffected by BitBurner changes
Chris Chua 2b932ccb 2013-08-16T16:37:43 changes to queueing strategy for BitBurner boards
Con Kolivas 1bb6dd40 2013-08-16T13:57:54 Merge branch 'master' of github.com:ckolivas/cgminer
Con Kolivas f3f939dd 2013-08-16T13:57:07 Do not poll in avalon_get_results without sleeping if we have finished parsing a full result.
kanoi f3837916 2013-08-15T17:14:16 Merge pull request #476 from kanoi/master avalon for timeout allow d='calculate it' and fix uninitialised
Con Kolivas 61cb05a9 2013-08-16T09:55:45 Add c to ambient temperature display for avalon driver.
Kano 51aaf816 2013-08-15T10:57:02 avalon for timeout allow d='calculate it' and fix uninitialised
Con Kolivas 3fe89486 2013-08-14T23:04:10 Use cloned work when finding avalon results since another thread can discard the work item while it's in use.
Con Kolivas dd9233f7 2013-08-13T17:24:01 The write thread in avalon is only ever actually woken up by timeout so remove the write semaphore and use a simple sleep poll.
Con Kolivas b2a3941e 2013-08-13T15:36:52 Fix warning.
Con Kolivas 992a97a3 2013-08-13T14:52:17 Interrupting reads on the avalon to start writes loses data so remove the cgsem_post in the read code.
Kano b1f57595 2013-08-10T10:12:15 avalon init write_sem before use
Con Kolivas f7e67010 2013-08-10T01:11:23 Fix uninit variable warnings.
Kano b1a80cef 2013-08-08T00:20:19 avalon allow frequency to be set via the API
Kano 802737e8 2013-08-07T23:47:19 BTB voltage management via the API - and set default on startup
Kano ecc9457b 2013-08-07T21:25:33 Avalon BTB allow partial work to be transferred
Kano 6dabdff1 2013-08-06T11:13:48 avalon_cts use correct buffer
Chris Chua 782206ce 2013-07-29T22:20:56 using usb_ident
Chris Chua b8cdaea8 2013-07-29T21:53:14 forgot a return
Chris Chua b0f4d55b 2013-07-29T21:39:29 changes to Avalon driver for BitBurner boards
Kano ad1572f7 2013-07-06T20:17:17 size check get_datestamp/get_timestamp and remove unused cgpu->init
Kano 385a70be 2013-07-06T19:15:59 make all statline overflow safe
Con Kolivas a011fe51 2013-07-03T22:40:47 Check for a timeout in avalon_scanhash and post to the write sem if we receive one.
Con Kolivas 3b2f9ccb 2013-07-03T21:48:06 Decay result count in avalon more slowly to not falsely detect idle periods as low result return rates.
Con Kolivas 4b4a1354 2013-07-03T21:22:27 Count the number of miners idled in avalon to account more accurately for when its result return rate is too low.
Con Kolivas e13c580c 2013-07-03T20:56:56 Fix potential dereference when starting avalon with all new work.
Con Kolivas 18422fbf 2013-07-02T16:07:32 Only throttle avalon clockspeed in avalon_auto in non optimal temperature settings if the fanspeed has reached maximum.
Con Kolivas 3ef0db56 2013-07-02T09:02:40 Reinstate more aggressive <2% HW error target for avalon-auto
Con Kolivas 05344eff 2013-07-01T16:20:41 Set avalon fan min and fan max to PWM values instead of percentage.
Con Kolivas 065b6a5e 2013-07-01T15:38:15 Provide an --avalon-freq command line to give a valid range of frequencies for avalon in auto mode.
Con Kolivas 36b556aa 2013-07-01T15:15:36 Set the avalon idle frequency to lowest if avalon auto is enabled and we have an overheat condition.
Con Kolivas ce214e12 2013-07-01T15:10:56 Decrease avalon frequency in auto mode if we are unable to maintain the temperature in the optimal range.
Con Kolivas d7c99cd1 2013-07-01T10:43:33 Use a more conservative upper limit of 1% for hardware errors with avalon auto frequency.
Con Kolivas f142a4de 2013-07-01T10:41:22 Allow the avalon fanspeed range to be passed as parameter on the command line, default to 20-100%
Con Kolivas 34547596 2013-06-27T08:26:53 Support all avalon frequencies on the command line.
Con Kolivas 18f9112e 2013-06-26T21:46:58 Reset the other auto counters in avalon when idling a device.
Con Kolivas e811c4dc 2013-06-26T00:15:04 Add an avalon-auto option which enables dynamic overclocking based on hardware error rate for maximum effective hashrate.
Con Kolivas 9b45daba 2013-06-25T19:39:42 Add an --avalon-cutoff feature which puts the avalon idle should it reach this temperature, defaulting to 60, re-enabling it when it gets to target temperature.
Con Kolivas 1fca632f 2013-06-24T11:04:02 Add an --avalon-temp option to allow a user specified target temperature.
Con Kolivas 6bdfed3d 2013-06-24T10:39:41 Demote no matching work message to verbose logging only on avalon.
Con Kolivas 6cc09aa1 2013-06-24T10:38:47 Make the fan control on the avalon a simple PID controller with a target temperature of 45.
Con Kolivas c64d95f2 2013-06-21T21:59:44 Support new overclocking speeds for avalon: 325, 350 and 375
Con Kolivas df81ce67 2013-06-21T18:17:34 Use the nusleep function for sleeping after sending work in avalon.
Con Kolivas a36e55b7 2013-06-21T17:39:26 Set the avalon preferred packet size to 512.
Con Kolivas 581afcf9 2013-06-21T11:18:00 Use only one cgsem in avalon signalling when the write thread should commit work by reading the status bytes off during an avalon_read, minimising the number of usb calls and resetting from only one place.
Con Kolivas cf13d02d 2013-06-21T11:03:03 Change avalon no valid work message to no matching work to match API terminology.
Con Kolivas 7c683cf2 2013-06-21T10:59:55 Use low latency usb transfers on the avalon, sleeping up to half a buffer's worth only if no data is returning to increase hashrate, abolish lost work and decrease CPU.
Con Kolivas e487d3d2 2013-06-21T01:58:18 Minimise the sleep times in avalon read to avoid result loss.
Con Kolivas b810dea3 2013-06-21T01:32:41 Revert "Sleep for less time in wait_avalon_ready till we have a better signalling system from read thread to write." This reverts commit 98862b4f46b801e14b9474fdac4286145cbdf6b6.
Con Kolivas 7e6cbf08 2013-06-21T01:23:38 Use a half nonce range before cycling through avalon's scanwork to ensure it gets a chance to fill work if time is tight for the write thread to signal a wakeup.
Con Kolivas 98862b4f 2013-06-20T23:59:17 Sleep for less time in wait_avalon_ready till we have a better signalling system from read thread to write.
Kano 7eba9634 2013-06-15T22:03:56 remove varargs from logging/quit/in general as much as possible
Con Kolivas bd6bc6bd 2013-06-13T16:13:52 Decrease the sleep duration before reading in avalon to not let the read buffer overflow.
Con Kolivas 9604cbee 2013-06-13T13:59:17 Sleep if the avalon buffer is empty and we've requested a read to allow the write thread to take precedence.
Con Kolivas 261b1299 2013-06-13T13:01:27 Add the cgpu_info structure before avalon reset.
Kano b8b137ae 2013-06-10T15:59:02 USB make device_path handled by usbutils
Kano 749fa78d 2013-06-10T15:39:44 tidy up free in device detect functions
Kano 9287ee90 2013-06-10T15:22:37 USB control creation and free of cgpu
Con Kolivas 059aa5ab 2013-06-07T08:52:58 Shorten the avalon statline to fit in the curses interface and show the lowest speed fan cooling the asic devices.
ckolivas b59c3380 2013-06-06T13:08:00 Implement cgminer specific cgsem semaphores to imitate unnamed semaphore behaviour on osx which does not support them.
Con Kolivas 5e94a972 2013-06-04T23:31:26 Set the avalon read transfer latency to avoid sleeping when no data is returned after very short latency settings.
Con Kolivas a60a1b0f 2013-05-30T16:35:58 Break out of idling loop in avalon_idle if the buffer is full.
Con Kolivas c0c5c060 2013-05-30T16:32:12 Provide some defaults for avalon if none are specified and do not try to claim the device if it fails to reset with them and no options are specified.
Con Kolivas dfab6a98 2013-05-30T10:18:09 Avalon fan factor is already multiplied into the info values.
Con Kolivas 06b9e0c4 2013-05-30T10:16:04 Get rid of zeros which corrupt display.
Con Kolivas 23736383 2013-05-30T10:14:10 Logic fail on minimum fanspeed reporting.
Con Kolivas 8bbb1793 2013-05-30T10:12:14 Provide a workaround for fan0 sensor not being used on avalon and pad fan RPM with zeros.
Con Kolivas 86b59c47 2013-05-30T10:05:16 Add ambient temp and lowest fan RPM information to avalon statline.
Con Kolivas 6dcdd543 2013-05-30T09:22:35 Display max temperature and fanspeed data for avalon.
Con Kolivas a10371b9 2013-05-29T23:03:32 Shut down the avalon mining thread if the device disappears.
ckolivas 173119d5 2013-05-29T11:49:10 Use the cgpu_info shutdown to determine when to stop the avalon read and write threads.
ckolivas 60bb463c 2013-05-29T11:45:47 Use semaphores to signal a reset to pause the read thread while the write thread does the actual reset, making all writes come from the same place.
ckolivas 2f4280b4 2013-05-29T09:19:34 Remove now unneeded fgpautils.h include from avalon.
Con Kolivas 0177b410 2013-05-29T00:33:56 Use the USB wrappers for avalon, telling usbutils that we want the raw data.
Con Kolivas d1337427 2013-05-29T00:15:30 Use separate ep for avalon tasks vs avalon reset and do not loop in write indefinitely.
Con Kolivas 772b354e 2013-05-28T23:59:07 Remove unneeded function and checks in avalon write code.
Con Kolivas 33e83eb7 2013-05-28T23:54:16 work_restart is reset within the queued hash work loop.
Con Kolivas 5900c024 2013-05-28T23:48:26 Fix avalon shutdown sequence.
Con Kolivas 7c645ffd 2013-05-28T23:02:29 Use nusleep in avalon_get_results in place of nmsleep.
Con Kolivas 7740ed83 2013-05-28T21:15:33 Give a buffer of perceived results in avalon during idle periods to allow for results once it becomes active again.
Con Kolivas 7ef11e2b 2013-05-27T21:02:32 Set the read and write threads for avalon to not cancel within libusb functions and wait for the threads to pthread_join on shutdown.
Con Kolivas 7506e499 2013-05-27T20:37:21 Offset needs to be incremented after avalon reads.
Con Kolivas 7748c469 2013-05-27T20:29:35 Make the avalon_read function parse the ftdi responses appopriately.