kmx git

Commit	Date	Message
9650bfd6	2013-05-27T14:58:08	Compile usbutils into avalon driver.
2d4a1db5	2013-05-27T14:37:41	Merge branch 'icarus-dev' into avalon-usbdev
8595f3bd	2013-05-27T13:41:57	Check results come in at least at 2/3 the rate they should be on avalon and if not, reset it.
91edf84c	2013-05-27T12:39:32	Give a warning but don't reset if the avalon buffer is full early.
abfaf361	2013-05-27T12:30:13	Discard any reads obtained from the avalon get results thread during a reset.
c1dd0525	2013-05-27T12:20:34	Differentiate initial reset in avalon from subsequent ones.
589e0877	2013-05-27T11:11:44	Perform a mandatory reset if the avalon buffer signals it's full before it has queued its normal quota of work.
b7901539	2013-05-27T01:33:54	Wait till buffer is cleared after sending idle tasks to avalon before returning from avalon_idle.
f1644462	2013-05-27T01:32:31	Lock qlock mutex during reset from read thread in avalon to prevent more work being sent till the reset is over.
499b2506	2013-05-27T01:29:57	Reset avalon if we continue to be unable to send all the work items.
b2b594b8	2013-05-27T00:53:24	Revert "Don't reset result counter to zero if it's negative in avalon on just one successful share." This reverts commit ce0a9cd3a4620e18e391be5ce88c92a606b1fddf. This wasn't the problem.
ce0a9cd3	2013-05-27T00:28:56	Don't reset result counter to zero if it's negative in avalon on just one successful share.
4c3fe39e	2013-05-26T21:50:31	Add avalon reset response to debugging output.
d0132a77	2013-05-26T21:34:53	Do a wait_avalon_ready before sending a reset code.
1f493d64	2013-05-26T21:30:55	Iterate over spare bytes in the avalon result returned from a reset request trying to find the beginning of the reset.
467d1497	2013-05-26T21:21:11	Idle avalon after reset.
1ef027c4	2013-05-26T21:14:17	Check for nothing but consecutive bad results on avalon and reset the FPGA if it happens.
44736b30	2013-05-26T20:59:40	Make submit_nonce return a bool for whether it's a valid share or not.
e90cf62a	2013-05-26T17:07:27	Unset the work restart flag sooner in avalon_flush_work to avoid re-entering the flush work function and just reset the queued counter instead of rotating the array to avoid runs of no valid work.
0a9d7ca6	2013-05-26T16:46:43	Implement an avalon_flush_work function for work restarts.
3c39d75f	2013-05-26T16:26:42	Shut down avalon read and write threads and idle the miners on closing it.
c9ca6ca7	2013-05-26T16:15:10	Tighter control over work submissions in avalon allows us to use a smaller array.
db7c72b8	2013-05-26T14:59:05	Rotate avalon array to reset the queued count before releasing the lock so work will always be available on next pass.
66e27a10	2013-05-26T14:37:45	Move avalon read thread start till after conditional wait, store idle status in avalon_info and use it to determine whether an error is appropriate or not.
0763070c	2013-05-26T14:29:28	Wait till the avalon_send_tasks thread has filled the avalon with idle work before starting the avalon_get_results thread.
7cf154bf	2013-05-26T14:23:14	Use AVA_GETS_OK macro in avalon_read.
ebf88552	2013-05-26T14:18:21	Do all writes on avalon with a select() timeout to prevent indefinite blocking and loop if less than desired is written.
596784aa	2013-05-26T14:08:21	Check explicitly that ava_buffer_full equals the macro.
e9e6ad82	2013-05-26T13:58:12	Send initial reset as an avalon task to remove avalon_write function.
e27ca544	2013-05-26T13:53:02	avalon_clear_readbuf is no longer required.
7dc3485f	2013-05-26T13:39:42	Check for 2 stray bytes on avalon reset.
629feb5f	2013-05-26T13:16:19	Create a separate thread for handling all work and idle submission to the avalon which messages the scanhash function it has completed to update statistics.
6c952105	2013-05-26T10:49:42	usbutils ensure it compiles without stats
aa9bf2cb	2013-05-26T10:33:47	usbutils include transfer mode in usbstats
c87f4c30	2013-05-26T09:04:24	Give the avalon get results thread name the device number as well.
4076e6b3	2013-05-26T08:57:02	Make sure we're not adjusting temps on every successful work retrieval on avalon.
4784ecce	2013-05-26T08:55:03	Count missing work items from behind a successful work read in avalon as well.
70a3e885	2013-05-26T08:42:41	Change message for work not found in avalon parser.
b1b93054	2013-05-26T08:34:06	usbutils handle bulk_transfer partial writes
fba70ff5	2013-05-26T01:51:20	Simplify debugging and only discard from avalon read buffer if at least one full result has been discarded.
7324a33b	2013-05-26T01:38:51	Only display discarded bytes in avalon if they're not used as nonces.
be3224f9	2013-05-26T01:33:32	Only loop once through avalon_parse_results, but do so after timeouts as well.
1f08809a	2013-05-26T01:31:20	Only debug and move ram if spare bytes exist in avalon buffer.
9f59e9a6	2013-05-26T01:30:03	Remove off by one error.
0a82b255	2013-05-26T01:25:43	Inverted logic.
b6b1abb5	2013-05-26T01:24:14	Add more debugging to avalon reads.
ab739358	2013-05-26T01:17:05	Convert unsigned size_ts to ints for parsing avalon messages.
bb06c2f0	2013-05-26T01:05:26	Cope with not finding nonces in avalon parsing gracefully by not overflowing buffers.
e9429f38	2013-05-26T00:52:20	Adjust avalon temp values on one lot of valid nonces from the parser.
74044467	2013-05-26T00:43:23	Created a threaded message parser for avalon reads.
ff44696a	2013-05-25T23:21:11	Avalon_wait_write is not effective during resets so do it after going idle.
4794ce70	2013-05-25T23:11:45	Send only a single byte reset.
e2c43792	2013-05-25T22:21:02	Repeat going idle after avalon reset, and wait for write ready before sending each reset request instead of some arbitrary sleep time.
a1cec2cd	2013-05-25T22:16:10	Revert "Send full avalon init task for reset." This reverts commit fa1bca31181f50b8912d2851ab141244e420b8cb. No difference.
fa1bca31	2013-05-25T16:09:46	Send full avalon init task for reset.
c7b1b030	2013-05-25T16:04:42	Timeouts on avalon_read and avalon_write should be 100ms.
4ddbe241	2013-05-25T15:52:08	Don't close avalon after detecting it until we're cleaning up, instead using reset for comms failures.
18710b14	2013-05-25T15:18:31	Check for avalon_wait_write before sending reset command.
0e071c98	2013-05-25T15:07:10	Sleep in avalon_write_ready.
674539bd	2013-05-25T15:03:02	Make avalon_wait_write a bool function and check its return value.
290666a1	2013-05-25T14:54:00	Show how many idle tasks are sent to avalon if it aborts on buffer full.
8b1a2471	2013-05-25T14:48:23	Reset avalon->device_fd after it is closed.
a6401643	2013-05-25T14:42:38	Create an avalon_wait_write function that is used before sending avalon idle command.
764f7cc4	2013-05-25T14:38:33	Avoid repeating avalon_idle in do_avalon_close and extra sleep.
ee4d72e3	2013-05-25T14:05:52	Pass fd to avalon_idle.
664fd5b4	2013-05-25T14:03:45	Revert "Change to setting avalon_task to being the pointer for avalon_idle." This reverts commit 91a82cd81f8ef63621cc473601adb325d662e409.
91a82cd8	2013-05-25T13:38:00	Change to setting avalon_task to being the pointer for avalon_idle.
e2578033	2013-05-25T13:27:54	Do avalon_reset after info structure is set up.
930317e1	2013-05-25T13:25:38	Rework avalon reset sequence to include idling of chips and waiting for them to go idle followed by 2nd reset and then checking result.
569a6f65	2013-05-25T12:11:26	Do a non-blocking read of anything in the avalon buffer after opening the device.
6baa23cf	2013-05-25T12:01:12	Assign the avalon info data to the device_data in cgpu_info.
1bb2cadf	2013-05-23T21:11:16	thread shutdown is different on windows
ab080fa6	2013-05-23T15:50:07	usbutils make all windows timeouts 999ms
2baa5b9c	2013-05-23T11:45:12	usb add another Cairnsmore1 USB chip
6e0f9347	2013-05-23T00:39:55	icarus do the full detect test twice if required
511bbb05	2013-05-22T23:49:08	CMR usb config guess
87d994b6	2013-05-22T23:22:00	usb add transfer_read and commented out in icarus
6a0b48a6	2013-05-20T22:37:52	usbutils allow unrounded control transfers
0c3f00c5	2013-05-20T21:58:04	icarus ICA initialisation
685d0ef1	2013-05-20T13:41:46	icarus report err on read failure
350e7f89	2013-05-20T02:59:30	icarus correct device_id and use device_data for icarus_info
c9cc7445	2013-05-20T02:52:07	miner.h remove unused device_file and add device_data
8fe40e98	2013-05-20T02:46:58	miner.h icarus no long uses fd
56a96b41	2013-05-20T00:48:15	icarus AMU config transfers
db080ba9	2013-05-19T22:13:23	usbutils force an unknown IDENT for zero
ddf008f0	2013-05-19T22:09:49	icarus set default options/timing based on device
a009f042	2013-05-19T21:30:16	Must unlock curses as well in logwin_update.
01fca3e7	2013-05-19T21:28:53	Create a logwin_update function which mandatorily updates the logwin and use it when input is expected to prevent display refresh delays.
a4697bed	2013-05-19T21:11:45	icarus report usb write error information
d06c8f65	2013-05-19T19:36:08	Add name to icarus copyright notice.
430416da	2013-05-19T19:35:26	Merge branch 'icarus-dev' of github.com:ckolivas/cgminer into icarus-dev
bbb79706	2013-05-19T19:34:12	Check for *pth dereference on pthread_join
e43f265a	2013-05-19T19:09:13	usbutils name latency correctly
1c5c8df6	2013-05-19T18:36:02	Check for restart before buffering more reads in Icarus.
4ba6cba8	2013-05-19T18:34:35	Icarus should timeout if it's greater than the timeout duration even if it's receiving data.
f4843877	2013-05-19T18:28:04	We should check for amount buffered in icarus get_nonce against amount already received.
04d530f3	2013-05-19T16:40:35	Make mining threads report out during work submission.
bb3b227b	2013-05-19T16:39:07	submit_work_async is no longer used directly by driver code.
41e6f48f	2013-05-19T14:02:25	Fix first read timeout on icarus get nonce.
9ecacb2c	2013-05-19T14:01:55	Retry icarus_initialise if the first read attempt fails.

9650bfd6

2013-05-27T14:58:08

Compile usbutils into avalon driver.

2d4a1db5

2013-05-27T14:37:41

Merge branch 'icarus-dev' into avalon-usbdev

8595f3bd

2013-05-27T13:41:57

Check results come in at least at 2/3 the rate they should be on avalon and if not, reset it.

91edf84c

2013-05-27T12:39:32

Give a warning but don't reset if the avalon buffer is full early.

abfaf361

2013-05-27T12:30:13

Discard any reads obtained from the avalon get results thread during a reset.

c1dd0525

2013-05-27T12:20:34

Differentiate initial reset in avalon from subsequent ones.

589e0877

2013-05-27T11:11:44

Perform a mandatory reset if the avalon buffer signals it's full before it has queued its normal quota of work.

b7901539

2013-05-27T01:33:54

Wait till buffer is cleared after sending idle tasks to avalon before returning from avalon_idle.

f1644462

2013-05-27T01:32:31

Lock qlock mutex during reset from read thread in avalon to prevent more work being sent till the reset is over.

499b2506

2013-05-27T01:29:57

Reset avalon if we continue to be unable to send all the work items.

b2b594b8

2013-05-27T00:53:24

Revert "Don't reset result counter to zero if it's negative in avalon on just one successful share." This reverts commit ce0a9cd3a4620e18e391be5ce88c92a606b1fddf. This wasn't the problem.

ce0a9cd3

2013-05-27T00:28:56

Don't reset result counter to zero if it's negative in avalon on just one successful share.

4c3fe39e

2013-05-26T21:50:31

Add avalon reset response to debugging output.

d0132a77

2013-05-26T21:34:53

Do a wait_avalon_ready before sending a reset code.

1f493d64

2013-05-26T21:30:55

Iterate over spare bytes in the avalon result returned from a reset request trying to find the beginning of the reset.

467d1497

2013-05-26T21:21:11

Idle avalon after reset.

1ef027c4

2013-05-26T21:14:17

Check for nothing but consecutive bad results on avalon and reset the FPGA if it happens.

44736b30

2013-05-26T20:59:40

Make submit_nonce return a bool for whether it's a valid share or not.

e90cf62a

2013-05-26T17:07:27

Unset the work restart flag sooner in avalon_flush_work to avoid re-entering the flush work function and just reset the queued counter instead of rotating the array to avoid runs of no valid work.

0a9d7ca6

2013-05-26T16:46:43

Implement an avalon_flush_work function for work restarts.

3c39d75f

2013-05-26T16:26:42

Shut down avalon read and write threads and idle the miners on closing it.

c9ca6ca7

2013-05-26T16:15:10

Tighter control over work submissions in avalon allows us to use a smaller array.

db7c72b8

2013-05-26T14:59:05

Rotate avalon array to reset the queued count before releasing the lock so work will always be available on next pass.

66e27a10

2013-05-26T14:37:45

Move avalon read thread start till after conditional wait, store idle status in avalon_info and use it to determine whether an error is appropriate or not.

0763070c

2013-05-26T14:29:28

Wait till the avalon_send_tasks thread has filled the avalon with idle work before starting the avalon_get_results thread.

7cf154bf

2013-05-26T14:23:14

Use AVA_GETS_OK macro in avalon_read.

ebf88552

2013-05-26T14:18:21

Do all writes on avalon with a select() timeout to prevent indefinite blocking and loop if less than desired is written.

596784aa

2013-05-26T14:08:21

Check explicitly that ava_buffer_full equals the macro.

e9e6ad82

2013-05-26T13:58:12

Send initial reset as an avalon task to remove avalon_write function.

e27ca544

2013-05-26T13:53:02

avalon_clear_readbuf is no longer required.

7dc3485f

2013-05-26T13:39:42

Check for 2 stray bytes on avalon reset.

629feb5f

2013-05-26T13:16:19

Create a separate thread for handling all work and idle submission to the avalon which messages the scanhash function it has completed to update statistics.

6c952105

2013-05-26T10:49:42

usbutils ensure it compiles without stats

aa9bf2cb

2013-05-26T10:33:47

usbutils include transfer mode in usbstats

c87f4c30

2013-05-26T09:04:24

Give the avalon get results thread name the device number as well.

4076e6b3

2013-05-26T08:57:02

Make sure we're not adjusting temps on every successful work retrieval on avalon.

4784ecce

2013-05-26T08:55:03

Count missing work items from behind a successful work read in avalon as well.

70a3e885

2013-05-26T08:42:41

Change message for work not found in avalon parser.

b1b93054

2013-05-26T08:34:06

usbutils handle bulk_transfer partial writes

fba70ff5

2013-05-26T01:51:20

Simplify debugging and only discard from avalon read buffer if at least one full result has been discarded.

7324a33b

2013-05-26T01:38:51

Only display discarded bytes in avalon if they're not used as nonces.

be3224f9

2013-05-26T01:33:32

Only loop once through avalon_parse_results, but do so after timeouts as well.

1f08809a

2013-05-26T01:31:20

Only debug and move ram if spare bytes exist in avalon buffer.

9f59e9a6

2013-05-26T01:30:03

Remove off by one error.

0a82b255

2013-05-26T01:25:43

Inverted logic.

b6b1abb5

2013-05-26T01:24:14

Add more debugging to avalon reads.

ab739358

2013-05-26T01:17:05

Convert unsigned size_ts to ints for parsing avalon messages.

bb06c2f0

2013-05-26T01:05:26

Cope with not finding nonces in avalon parsing gracefully by not overflowing buffers.

e9429f38

2013-05-26T00:52:20

Adjust avalon temp values on one lot of valid nonces from the parser.

74044467

2013-05-26T00:43:23

Created a threaded message parser for avalon reads.

ff44696a

2013-05-25T23:21:11

Avalon_wait_write is not effective during resets so do it after going idle.

4794ce70

2013-05-25T23:11:45

Send only a single byte reset.

e2c43792

2013-05-25T22:21:02

Repeat going idle after avalon reset, and wait for write ready before sending each reset request instead of some arbitrary sleep time.

a1cec2cd

2013-05-25T22:16:10

Revert "Send full avalon init task for reset." This reverts commit fa1bca31181f50b8912d2851ab141244e420b8cb. No difference.

fa1bca31

2013-05-25T16:09:46

Send full avalon init task for reset.

c7b1b030

2013-05-25T16:04:42

Timeouts on avalon_read and avalon_write should be 100ms.

4ddbe241

2013-05-25T15:52:08

Don't close avalon after detecting it until we're cleaning up, instead using reset for comms failures.

18710b14

2013-05-25T15:18:31

Check for avalon_wait_write before sending reset command.

0e071c98

2013-05-25T15:07:10

Sleep in avalon_write_ready.

674539bd

2013-05-25T15:03:02

Make avalon_wait_write a bool function and check its return value.

290666a1

2013-05-25T14:54:00

Show how many idle tasks are sent to avalon if it aborts on buffer full.

8b1a2471

2013-05-25T14:48:23

Reset avalon->device_fd after it is closed.

a6401643

2013-05-25T14:42:38

Create an avalon_wait_write function that is used before sending avalon idle command.

764f7cc4

2013-05-25T14:38:33

Avoid repeating avalon_idle in do_avalon_close and extra sleep.

ee4d72e3

2013-05-25T14:05:52

Pass fd to avalon_idle.

664fd5b4

2013-05-25T14:03:45

Revert "Change to setting avalon_task to being the pointer for avalon_idle." This reverts commit 91a82cd81f8ef63621cc473601adb325d662e409.

91a82cd8

2013-05-25T13:38:00

Change to setting avalon_task to being the pointer for avalon_idle.

e2578033

2013-05-25T13:27:54

Do avalon_reset after info structure is set up.

930317e1

2013-05-25T13:25:38

Rework avalon reset sequence to include idling of chips and waiting for them to go idle followed by 2nd reset and then checking result.

569a6f65

2013-05-25T12:11:26

Do a non-blocking read of anything in the avalon buffer after opening the device.

6baa23cf

2013-05-25T12:01:12

Assign the avalon info data to the device_data in cgpu_info.

1bb2cadf

2013-05-23T21:11:16

thread shutdown is different on windows

ab080fa6

2013-05-23T15:50:07

usbutils make all windows timeouts 999ms

2baa5b9c

2013-05-23T11:45:12

usb add another Cairnsmore1 USB chip

6e0f9347

2013-05-23T00:39:55

icarus do the full detect test twice if required

511bbb05

2013-05-22T23:49:08

CMR usb config guess

87d994b6

2013-05-22T23:22:00

usb add transfer_read and commented out in icarus

6a0b48a6

2013-05-20T22:37:52

usbutils allow unrounded control transfers

0c3f00c5

2013-05-20T21:58:04

icarus ICA initialisation

685d0ef1

2013-05-20T13:41:46

icarus report err on read failure

350e7f89

2013-05-20T02:59:30

icarus correct device_id and use device_data for icarus_info

c9cc7445

2013-05-20T02:52:07

miner.h remove unused device_file and add device_data

8fe40e98

2013-05-20T02:46:58

miner.h icarus no long uses fd

56a96b41

2013-05-20T00:48:15

icarus AMU config transfers

db080ba9

2013-05-19T22:13:23

usbutils force an unknown IDENT for zero

ddf008f0

2013-05-19T22:09:49

icarus set default options/timing based on device

a009f042

2013-05-19T21:30:16

Must unlock curses as well in logwin_update.

01fca3e7

2013-05-19T21:28:53

Create a logwin_update function which mandatorily updates the logwin and use it when input is expected to prevent display refresh delays.

a4697bed

2013-05-19T21:11:45

icarus report usb write error information

d06c8f65

2013-05-19T19:36:08

Add name to icarus copyright notice.

430416da

2013-05-19T19:35:26

Merge branch 'icarus-dev' of github.com:ckolivas/cgminer into icarus-dev

bbb79706

2013-05-19T19:34:12

Check for *pth dereference on pthread_join

e43f265a

2013-05-19T19:09:13

usbutils name latency correctly

1c5c8df6

2013-05-19T18:36:02

Check for restart before buffering more reads in Icarus.

4ba6cba8

2013-05-19T18:34:35

Icarus should timeout if it's greater than the timeout duration even if it's receiving data.

f4843877

2013-05-19T18:28:04

We should check for amount buffered in icarus get_nonce against amount already received.

04d530f3

2013-05-19T16:40:35

Make mining threads report out during work submission.

bb3b227b

2013-05-19T16:39:07

submit_work_async is no longer used directly by driver code.

41e6f48f

2013-05-19T14:02:25

Fix first read timeout on icarus get nonce.

9ecacb2c

2013-05-19T14:01:55

Retry icarus_initialise if the first read attempt fails.

thodg/cgminer

Log