thodg/libgit2

diff --git a/deps/zlib/adler32.c b/deps/zlib/adler32.c
index a868f07..d0be438 100644
--- a/deps/zlib/adler32.c
+++ b/deps/zlib/adler32.c
@@ -1,5 +1,5 @@
 /* adler32.c -- compute the Adler-32 checksum of a data stream
- * Copyright (C) 1995-2011 Mark Adler
+ * Copyright (C) 1995-2011, 2016 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
@@ -7,11 +7,9 @@
 
 #include "zutil.h"
 
-#define local static
-
 local uLong adler32_combine_ OF((uLong adler1, uLong adler2, z_off64_t len2));
 
-#define BASE 65521      /* largest prime smaller than 65536 */
+#define BASE 65521U     /* largest prime smaller than 65536 */
 #define NMAX 5552
 /* NMAX is the largest n such that 255n(n+1)/2 + (n+1)(BASE-1) <= 2^32-1 */
 
@@ -62,10 +60,10 @@ local uLong adler32_combine_ OF((uLong adler1, uLong adler2, z_off64_t len2));
 #endif
 
 /* ========================================================================= */
-uLong ZEXPORT adler32(adler, buf, len)
+uLong ZEXPORT adler32_z(adler, buf, len)
     uLong adler;
     const Bytef *buf;
-    uInt len;
+    z_size_t len;
 {
     unsigned long sum2;
     unsigned n;
@@ -133,6 +131,15 @@ uLong ZEXPORT adler32(adler, buf, len)
 }
 
 /* ========================================================================= */
+uLong ZEXPORT adler32(adler, buf, len)
+    uLong adler;
+    const Bytef *buf;
+    uInt len;
+{
+    return adler32_z(adler, buf, len);
+}
+
+/* ========================================================================= */
 local uLong adler32_combine_(adler1, adler2, len2)
     uLong adler1;
     uLong adler2;
@@ -156,7 +163,7 @@ local uLong adler32_combine_(adler1, adler2, len2)
     sum2 += ((adler1 >> 16) & 0xffff) + ((adler2 >> 16) & 0xffff) + BASE - rem;
     if (sum1 >= BASE) sum1 -= BASE;
     if (sum1 >= BASE) sum1 -= BASE;
-    if (sum2 >= (BASE << 1)) sum2 -= (BASE << 1);
+    if (sum2 >= ((unsigned long)BASE << 1)) sum2 -= ((unsigned long)BASE << 1);
     if (sum2 >= BASE) sum2 -= BASE;
     return sum1 | (sum2 << 16);
 }
diff --git a/deps/zlib/crc32.c b/deps/zlib/crc32.c
index 979a719..9580440 100644
--- a/deps/zlib/crc32.c
+++ b/deps/zlib/crc32.c
@@ -1,5 +1,5 @@
 /* crc32.c -- compute the CRC-32 of a data stream
- * Copyright (C) 1995-2006, 2010, 2011, 2012 Mark Adler
+ * Copyright (C) 1995-2006, 2010, 2011, 2012, 2016 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h
  *
  * Thanks to Rodney Brown <rbrown64@csc.com.au> for his contribution of faster
@@ -30,17 +30,15 @@
 
 #include "zutil.h"      /* for STDC and FAR definitions */
 
-#define local static
-
 /* Definitions for doing the crc four data bytes at a time. */
 #if !defined(NOBYFOUR) && defined(Z_U4)
 #  define BYFOUR
 #endif
 #ifdef BYFOUR
    local unsigned long crc32_little OF((unsigned long,
-                        const unsigned char FAR *, unsigned));
+                        const unsigned char FAR *, z_size_t));
    local unsigned long crc32_big OF((unsigned long,
-                        const unsigned char FAR *, unsigned));
+                        const unsigned char FAR *, z_size_t));
 #  define TBLS 8
 #else
 #  define TBLS 1
@@ -201,10 +199,10 @@ const z_crc_t FAR * ZEXPORT get_crc_table()
 #define DO8 DO1; DO1; DO1; DO1; DO1; DO1; DO1; DO1
 
 /* ========================================================================= */
-unsigned long ZEXPORT crc32(crc, buf, len)
+unsigned long ZEXPORT crc32_z(crc, buf, len)
     unsigned long crc;
     const unsigned char FAR *buf;
-    uInt len;
+    z_size_t len;
 {
     if (buf == Z_NULL) return 0UL;
 
@@ -235,8 +233,29 @@ unsigned long ZEXPORT crc32(crc, buf, len)
     return crc ^ 0xffffffffUL;
 }
 
+/* ========================================================================= */
+unsigned long ZEXPORT crc32(crc, buf, len)
+    unsigned long crc;
+    const unsigned char FAR *buf;
+    uInt len;
+{
+    return crc32_z(crc, buf, len);
+}
+
 #ifdef BYFOUR
 
+/*
+   This BYFOUR code accesses the passed unsigned char * buffer with a 32-bit
+   integer pointer type. This violates the strict aliasing rule, where a
+   compiler can assume, for optimization purposes, that two pointers to
+   fundamentally different types won't ever point to the same memory. This can
+   manifest as a problem only if one of the pointers is written to. This code
+   only reads from those pointers. So long as this code remains isolated in
+   this compilation unit, there won't be a problem. For this reason, this code
+   should not be copied and pasted into a compilation unit in which other code
+   writes to the buffer that is passed to these routines.
+ */
+
 /* ========================================================================= */
 #define DOLIT4 c ^= *buf4++; \
         c = crc_table[3][c & 0xff] ^ crc_table[2][(c >> 8) & 0xff] ^ \
@@ -247,7 +266,7 @@ unsigned long ZEXPORT crc32(crc, buf, len)
 local unsigned long crc32_little(crc, buf, len)
     unsigned long crc;
     const unsigned char FAR *buf;
-    unsigned len;
+    z_size_t len;
 {
     register z_crc_t c;
     register const z_crc_t FAR *buf4;
@@ -278,7 +297,7 @@ local unsigned long crc32_little(crc, buf, len)
 }
 
 /* ========================================================================= */
-#define DOBIG4 c ^= *++buf4; \
+#define DOBIG4 c ^= *buf4++; \
         c = crc_table[4][c & 0xff] ^ crc_table[5][(c >> 8) & 0xff] ^ \
             crc_table[6][(c >> 16) & 0xff] ^ crc_table[7][c >> 24]
 #define DOBIG32 DOBIG4; DOBIG4; DOBIG4; DOBIG4; DOBIG4; DOBIG4; DOBIG4; DOBIG4
@@ -287,7 +306,7 @@ local unsigned long crc32_little(crc, buf, len)
 local unsigned long crc32_big(crc, buf, len)
     unsigned long crc;
     const unsigned char FAR *buf;
-    unsigned len;
+    z_size_t len;
 {
     register z_crc_t c;
     register const z_crc_t FAR *buf4;
@@ -300,7 +319,6 @@ local unsigned long crc32_big(crc, buf, len)
     }
 
     buf4 = (const z_crc_t FAR *)(const void FAR *)buf;
-    buf4--;
     while (len >= 32) {
         DOBIG32;
         len -= 32;
@@ -309,7 +327,6 @@ local unsigned long crc32_big(crc, buf, len)
         DOBIG4;
         len -= 4;
     }
-    buf4++;
     buf = (const unsigned char FAR *)buf4;
 
     if (len) do {
diff --git a/deps/zlib/deflate.c b/deps/zlib/deflate.c
index 6969577..1ec7614 100644
--- a/deps/zlib/deflate.c
+++ b/deps/zlib/deflate.c
@@ -1,5 +1,5 @@
 /* deflate.c -- compress data using the deflation algorithm
- * Copyright (C) 1995-2013 Jean-loup Gailly and Mark Adler
+ * Copyright (C) 1995-2017 Jean-loup Gailly and Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
@@ -52,7 +52,7 @@
 #include "deflate.h"
 
 const char deflate_copyright[] =
-   " deflate 1.2.8 Copyright 1995-2013 Jean-loup Gailly and Mark Adler ";
+   " deflate 1.2.11 Copyright 1995-2017 Jean-loup Gailly and Mark Adler ";
 /*
   If you use the zlib library in a product, an acknowledgment is welcome
   in the documentation of your product. If for some reason you cannot
@@ -73,6 +73,8 @@ typedef enum {
 typedef block_state (*compress_func) OF((deflate_state *s, int flush));
 /* Compression function. Returns the block state after the call. */
 
+local int deflateStateCheck      OF((z_streamp strm));
+local void slide_hash     OF((deflate_state *s));
 local void fill_window    OF((deflate_state *s));
 local block_state deflate_stored OF((deflate_state *s, int flush));
 local block_state deflate_fast   OF((deflate_state *s, int flush));
@@ -84,15 +86,16 @@ local block_state deflate_huff   OF((deflate_state *s, int flush));
 local void lm_init        OF((deflate_state *s));
 local void putShortMSB    OF((deflate_state *s, uInt b));
 local void flush_pending  OF((z_streamp strm));
-local int read_buf        OF((z_streamp strm, Bytef *buf, unsigned size));
+local unsigned read_buf   OF((z_streamp strm, Bytef *buf, unsigned size));
 #ifdef ASMV
+#  pragma message("Assembler code may have bugs -- use at your own risk")
       void match_init OF((void)); /* asm code initialization */
       uInt longest_match  OF((deflate_state *s, IPos cur_match));
 #else
 local uInt longest_match  OF((deflate_state *s, IPos cur_match));
 #endif
 
-#ifdef DEBUG
+#ifdef ZLIB_DEBUG
 local  void check_match OF((deflate_state *s, IPos start, IPos match,
                             int length));
 #endif
@@ -148,21 +151,14 @@ local const config configuration_table[10] = {
  * meaning.
  */
 
-#define EQUAL 0
-/* result of memcmp for equal strings */
-
-#ifndef NO_DUMMY_DECL
-struct static_tree_desc_s {int dummy;}; /* for buggy compilers */
-#endif
-
 /* rank Z_BLOCK between Z_NO_FLUSH and Z_PARTIAL_FLUSH */
-#define RANK(f) (((f) << 1) - ((f) > 4 ? 9 : 0))
+#define RANK(f) (((f) * 2) - ((f) > 4 ? 9 : 0))
 
 /* ===========================================================================
  * Update a hash value with the given input byte
- * IN  assertion: all calls to to UPDATE_HASH are made with consecutive
- *    input characters, so that a running hash key can be computed from the
- *    previous key instead of complete recalculation each time.
+ * IN  assertion: all calls to UPDATE_HASH are made with consecutive input
+ *    characters, so that a running hash key can be computed from the previous
+ *    key instead of complete recalculation each time.
  */
 #define UPDATE_HASH(s,h,c) (h = (((h)<<s->hash_shift) ^ (c)) & s->hash_mask)
 
@@ -173,9 +169,9 @@ struct static_tree_desc_s {int dummy;}; /* for buggy compilers */
  * the previous length of the hash chain.
  * If this file is compiled with -DFASTEST, the compression level is forced
  * to 1, and no hash chains are maintained.
- * IN  assertion: all calls to to INSERT_STRING are made with consecutive
- *    input characters and the first MIN_MATCH bytes of str are valid
- *    (except for the last MIN_MATCH-1 bytes of the input file).
+ * IN  assertion: all calls to INSERT_STRING are made with consecutive input
+ *    characters and the first MIN_MATCH bytes of str are valid (except for
+ *    the last MIN_MATCH-1 bytes of the input file).
  */
 #ifdef FASTEST
 #define INSERT_STRING(s, str, match_head) \
@@ -197,6 +193,37 @@ struct static_tree_desc_s {int dummy;}; /* for buggy compilers */
     s->head[s->hash_size-1] = NIL; \
     zmemzero((Bytef *)s->head, (unsigned)(s->hash_size-1)*sizeof(*s->head));
 
+/* ===========================================================================
+ * Slide the hash table when sliding the window down (could be avoided with 32
+ * bit values at the expense of memory usage). We slide even when level == 0 to
+ * keep the hash table consistent if we switch back to level > 0 later.
+ */
+local void slide_hash(s)
+    deflate_state *s;
+{
+    unsigned n, m;
+    Posf *p;
+    uInt wsize = s->w_size;
+
+    n = s->hash_size;
+    p = &s->head[n];
+    do {
+        m = *--p;
+        *p = (Pos)(m >= wsize ? m - wsize : NIL);
+    } while (--n);
+    n = wsize;
+#ifndef FASTEST
+    p = &s->prev[n];
+    do {
+        m = *--p;
+        *p = (Pos)(m >= wsize ? m - wsize : NIL);
+        /* If n is not on any hash chain, prev[n] is garbage but
+         * its value will never be used.
+         */
+    } while (--n);
+#endif
+}
+
 /* ========================================================================= */
 int ZEXPORT deflateInit_(strm, level, version, stream_size)
     z_streamp strm;
@@ -270,7 +297,7 @@ int ZEXPORT deflateInit2_(strm, level, method, windowBits, memLevel, strategy,
 #endif
     if (memLevel < 1 || memLevel > MAX_MEM_LEVEL || method != Z_DEFLATED ||
         windowBits < 8 || windowBits > 15 || level < 0 || level > 9 ||
-        strategy < 0 || strategy > Z_FIXED) {
+        strategy < 0 || strategy > Z_FIXED || (windowBits == 8 && wrap != 1)) {
         return Z_STREAM_ERROR;
     }
     if (windowBits == 8) windowBits = 9;  /* until 256-byte window bug fixed */
@@ -278,14 +305,15 @@ int ZEXPORT deflateInit2_(strm, level, method, windowBits, memLevel, strategy,
     if (s == Z_NULL) return Z_MEM_ERROR;
     strm->state = (struct internal_state FAR *)s;
     s->strm = strm;
+    s->status = INIT_STATE;     /* to pass state test in deflateReset() */
 
     s->wrap = wrap;
     s->gzhead = Z_NULL;
-    s->w_bits = windowBits;
+    s->w_bits = (uInt)windowBits;
     s->w_size = 1 << s->w_bits;
     s->w_mask = s->w_size - 1;
 
-    s->hash_bits = memLevel + 7;
+    s->hash_bits = (uInt)memLevel + 7;
     s->hash_size = 1 << s->hash_bits;
     s->hash_mask = s->hash_size - 1;
     s->hash_shift =  ((s->hash_bits+MIN_MATCH-1)/MIN_MATCH);
@@ -319,6 +347,31 @@ int ZEXPORT deflateInit2_(strm, level, method, windowBits, memLevel, strategy,
     return deflateReset(strm);
 }
 
+/* =========================================================================
+ * Check for a valid deflate stream state. Return 0 if ok, 1 if not.
+ */
+local int deflateStateCheck (strm)
+    z_streamp strm;
+{
+    deflate_state *s;
+    if (strm == Z_NULL ||
+        strm->zalloc == (alloc_func)0 || strm->zfree == (free_func)0)
+        return 1;
+    s = strm->state;
+    if (s == Z_NULL || s->strm != strm || (s->status != INIT_STATE &&
+#ifdef GZIP
+                                           s->status != GZIP_STATE &&
+#endif
+                                           s->status != EXTRA_STATE &&
+                                           s->status != NAME_STATE &&
+                                           s->status != COMMENT_STATE &&
+                                           s->status != HCRC_STATE &&
+                                           s->status != BUSY_STATE &&
+                                           s->status != FINISH_STATE))
+        return 1;
+    return 0;
+}
+
 /* ========================================================================= */
 int ZEXPORT deflateSetDictionary (strm, dictionary, dictLength)
     z_streamp strm;
@@ -331,7 +384,7 @@ int ZEXPORT deflateSetDictionary (strm, dictionary, dictLength)
     unsigned avail;
     z_const unsigned char *next;
 
-    if (strm == Z_NULL || strm->state == Z_NULL || dictionary == Z_NULL)
+    if (deflateStateCheck(strm) || dictionary == Z_NULL)
         return Z_STREAM_ERROR;
     s = strm->state;
     wrap = s->wrap;
@@ -389,13 +442,34 @@ int ZEXPORT deflateSetDictionary (strm, dictionary, dictLength)
 }
 
 /* ========================================================================= */
+int ZEXPORT deflateGetDictionary (strm, dictionary, dictLength)
+    z_streamp strm;
+    Bytef *dictionary;
+    uInt  *dictLength;
+{
+    deflate_state *s;
+    uInt len;
+
+    if (deflateStateCheck(strm))
+        return Z_STREAM_ERROR;
+    s = strm->state;
+    len = s->strstart + s->lookahead;
+    if (len > s->w_size)
+        len = s->w_size;
+    if (dictionary != Z_NULL && len)
+        zmemcpy(dictionary, s->window + s->strstart + s->lookahead - len, len);
+    if (dictLength != Z_NULL)
+        *dictLength = len;
+    return Z_OK;
+}
+
+/* ========================================================================= */
 int ZEXPORT deflateResetKeep (strm)
     z_streamp strm;
 {
     deflate_state *s;
 
-    if (strm == Z_NULL || strm->state == Z_NULL ||
-        strm->zalloc == (alloc_func)0 || strm->zfree == (free_func)0) {
+    if (deflateStateCheck(strm)) {
         return Z_STREAM_ERROR;
     }
 
@@ -410,7 +484,11 @@ int ZEXPORT deflateResetKeep (strm)
     if (s->wrap < 0) {
         s->wrap = -s->wrap; /* was made negative by deflate(..., Z_FINISH); */
     }
-    s->status = s->wrap ? INIT_STATE : BUSY_STATE;
+    s->status =
+#ifdef GZIP
+        s->wrap == 2 ? GZIP_STATE :
+#endif
+        s->wrap ? INIT_STATE : BUSY_STATE;
     strm->adler =
 #ifdef GZIP
         s->wrap == 2 ? crc32(0L, Z_NULL, 0) :
@@ -440,8 +518,8 @@ int ZEXPORT deflateSetHeader (strm, head)
     z_streamp strm;
     gz_headerp head;
 {
-    if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
-    if (strm->state->wrap != 2) return Z_STREAM_ERROR;
+    if (deflateStateCheck(strm) || strm->state->wrap != 2)
+        return Z_STREAM_ERROR;
     strm->state->gzhead = head;
     return Z_OK;
 }
@@ -452,7 +530,7 @@ int ZEXPORT deflatePending (strm, pending, bits)
     int *bits;
     z_streamp strm;
 {
-    if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+    if (deflateStateCheck(strm)) return Z_STREAM_ERROR;
     if (pending != Z_NULL)
         *pending = strm->state->pending;
     if (bits != Z_NULL)
@@ -469,7 +547,7 @@ int ZEXPORT deflatePrime (strm, bits, value)
     deflate_state *s;
     int put;
 
-    if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+    if (deflateStateCheck(strm)) return Z_STREAM_ERROR;
     s = strm->state;
     if ((Bytef *)(s->d_buf) < s->pending_out + ((Buf_size + 7) >> 3))
         return Z_BUF_ERROR;
@@ -494,9 +572,8 @@ int ZEXPORT deflateParams(strm, level, strategy)
 {
     deflate_state *s;
     compress_func func;
-    int err = Z_OK;
 
-    if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+    if (deflateStateCheck(strm)) return Z_STREAM_ERROR;
     s = strm->state;
 
 #ifdef FASTEST
@@ -510,13 +587,22 @@ int ZEXPORT deflateParams(strm, level, strategy)
     func = configuration_table[s->level].func;
 
     if ((strategy != s->strategy || func != configuration_table[level].func) &&
-        strm->total_in != 0) {
+        s->high_water) {
         /* Flush the last buffer: */
-        err = deflate(strm, Z_BLOCK);
-        if (err == Z_BUF_ERROR && s->pending == 0)
-            err = Z_OK;
+        int err = deflate(strm, Z_BLOCK);
+        if (err == Z_STREAM_ERROR)
+            return err;
+        if (strm->avail_out == 0)
+            return Z_BUF_ERROR;
     }
     if (s->level != level) {
+        if (s->level == 0 && s->matches != 0) {
+            if (s->matches == 1)
+                slide_hash(s);
+            else
+                CLEAR_HASH(s);
+            s->matches = 0;
+        }
         s->level = level;
         s->max_lazy_match   = configuration_table[level].max_lazy;
         s->good_match       = configuration_table[level].good_length;
@@ -524,7 +610,7 @@ int ZEXPORT deflateParams(strm, level, strategy)
         s->max_chain_length = configuration_table[level].max_chain;
     }
     s->strategy = strategy;
-    return err;
+    return Z_OK;
 }
 
 /* ========================================================================= */
@@ -537,12 +623,12 @@ int ZEXPORT deflateTune(strm, good_length, max_lazy, nice_length, max_chain)
 {
     deflate_state *s;
 
-    if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+    if (deflateStateCheck(strm)) return Z_STREAM_ERROR;
     s = strm->state;
-    s->good_match = good_length;
-    s->max_lazy_match = max_lazy;
+    s->good_match = (uInt)good_length;
+    s->max_lazy_match = (uInt)max_lazy;
     s->nice_match = nice_length;
-    s->max_chain_length = max_chain;
+    s->max_chain_length = (uInt)max_chain;
     return Z_OK;
 }
 
@@ -569,14 +655,13 @@ uLong ZEXPORT deflateBound(strm, sourceLen)
 {
     deflate_state *s;
     uLong complen, wraplen;
-    Bytef *str;
 
     /* conservative upper bound for compressed data */
     complen = sourceLen +
               ((sourceLen + 7) >> 3) + ((sourceLen + 63) >> 6) + 5;
 
     /* if can't get parameters, return conservative bound plus zlib wrapper */
-    if (strm == Z_NULL || strm->state == Z_NULL)
+    if (deflateStateCheck(strm))
         return complen + 6;
 
     /* compute wrapper length */
@@ -588,9 +673,11 @@ uLong ZEXPORT deflateBound(strm, sourceLen)
     case 1:                                 /* zlib wrapper */
         wraplen = 6 + (s->strstart ? 4 : 0);
         break;
+#ifdef GZIP
     case 2:                                 /* gzip wrapper */
         wraplen = 18;
         if (s->gzhead != Z_NULL) {          /* user-supplied gzip header */
+            Bytef *str;
             if (s->gzhead->extra != Z_NULL)
                 wraplen += 2 + s->gzhead->extra_len;
             str = s->gzhead->name;
@@ -607,6 +694,7 @@ uLong ZEXPORT deflateBound(strm, sourceLen)
                 wraplen += 2;
         }
         break;
+#endif
     default:                                /* for compiler happiness */
         wraplen = 6;
     }
@@ -634,10 +722,10 @@ local void putShortMSB (s, b)
 }
 
 /* =========================================================================
- * Flush as much pending output as possible. All deflate() output goes
- * through this function so some applications may wish to modify it
- * to avoid allocating a large strm->next_out buffer and copying into it.
- * (See also read_buf()).
+ * Flush as much pending output as possible. All deflate() output, except for
+ * some deflate_stored() output, goes through this function so some
+ * applications may wish to modify it to avoid allocating a large
+ * strm->next_out buffer and copying into it. (See also read_buf()).
  */
 local void flush_pending(strm)
     z_streamp strm;
@@ -654,13 +742,23 @@ local void flush_pending(strm)
     strm->next_out  += len;
     s->pending_out  += len;
     strm->total_out += len;
-    strm->avail_out  -= len;
-    s->pending -= len;
+    strm->avail_out -= len;
+    s->pending      -= len;
     if (s->pending == 0) {
         s->pending_out = s->pending_buf;
     }
 }
 
+/* ===========================================================================
+ * Update the header CRC with the bytes s->pending_buf[beg..s->pending - 1].
+ */
+#define HCRC_UPDATE(beg) \
+    do { \
+        if (s->gzhead->hcrc && s->pending > (beg)) \
+            strm->adler = crc32(strm->adler, s->pending_buf + (beg), \
+                                s->pending - (beg)); \
+    } while (0)
+
 /* ========================================================================= */
 int ZEXPORT deflate (strm, flush)
     z_streamp strm;
@@ -669,230 +767,229 @@ int ZEXPORT deflate (strm, flush)
     int old_flush; /* value of flush param for previous deflate call */
     deflate_state *s;
 
-    if (strm == Z_NULL || strm->state == Z_NULL ||
-        flush > Z_BLOCK || flush < 0) {
+    if (deflateStateCheck(strm) || flush > Z_BLOCK || flush < 0) {
         return Z_STREAM_ERROR;
     }
     s = strm->state;
 
     if (strm->next_out == Z_NULL ||
-        (strm->next_in == Z_NULL && strm->avail_in != 0) ||
+        (strm->avail_in != 0 && strm->next_in == Z_NULL) ||
         (s->status == FINISH_STATE && flush != Z_FINISH)) {
         ERR_RETURN(strm, Z_STREAM_ERROR);
     }
     if (strm->avail_out == 0) ERR_RETURN(strm, Z_BUF_ERROR);
 
-    s->strm = strm; /* just in case */
     old_flush = s->last_flush;
     s->last_flush = flush;
 
+    /* Flush as much pending output as possible */
+    if (s->pending != 0) {
+        flush_pending(strm);
+        if (strm->avail_out == 0) {
+            /* Since avail_out is 0, deflate will be called again with
+             * more output space, but possibly with both pending and
+             * avail_in equal to zero. There won't be anything to do,
+             * but this is not an error situation so make sure we
+             * return OK instead of BUF_ERROR at next call of deflate:
+             */
+            s->last_flush = -1;
+            return Z_OK;
+        }
+
+    /* Make sure there is something to do and avoid duplicate consecutive
+     * flushes. For repeated and useless calls with Z_FINISH, we keep
+     * returning Z_STREAM_END instead of Z_BUF_ERROR.
+     */
+    } else if (strm->avail_in == 0 && RANK(flush) <= RANK(old_flush) &&
+               flush != Z_FINISH) {
+        ERR_RETURN(strm, Z_BUF_ERROR);
+    }
+
+    /* User must not provide more input after the first FINISH: */
+    if (s->status == FINISH_STATE && strm->avail_in != 0) {
+        ERR_RETURN(strm, Z_BUF_ERROR);
+    }
+
     /* Write the header */
     if (s->status == INIT_STATE) {
-#ifdef GZIP
-        if (s->wrap == 2) {
-            strm->adler = crc32(0L, Z_NULL, 0);
-            put_byte(s, 31);
-            put_byte(s, 139);
-            put_byte(s, 8);
-            if (s->gzhead == Z_NULL) {
-                put_byte(s, 0);
-                put_byte(s, 0);
-                put_byte(s, 0);
-                put_byte(s, 0);
-                put_byte(s, 0);
-                put_byte(s, s->level == 9 ? 2 :
-                            (s->strategy >= Z_HUFFMAN_ONLY || s->level < 2 ?
-                             4 : 0));
-                put_byte(s, OS_CODE);
-                s->status = BUSY_STATE;
-            }
-            else {
-                put_byte(s, (s->gzhead->text ? 1 : 0) +
-                            (s->gzhead->hcrc ? 2 : 0) +
-                            (s->gzhead->extra == Z_NULL ? 0 : 4) +
-                            (s->gzhead->name == Z_NULL ? 0 : 8) +
-                            (s->gzhead->comment == Z_NULL ? 0 : 16)
-                        );
-                put_byte(s, (Byte)(s->gzhead->time & 0xff));
-                put_byte(s, (Byte)((s->gzhead->time >> 8) & 0xff));
-                put_byte(s, (Byte)((s->gzhead->time >> 16) & 0xff));
-                put_byte(s, (Byte)((s->gzhead->time >> 24) & 0xff));
-                put_byte(s, s->level == 9 ? 2 :
-                            (s->strategy >= Z_HUFFMAN_ONLY || s->level < 2 ?
-                             4 : 0));
-                put_byte(s, s->gzhead->os & 0xff);
-                if (s->gzhead->extra != Z_NULL) {
-                    put_byte(s, s->gzhead->extra_len & 0xff);
-                    put_byte(s, (s->gzhead->extra_len >> 8) & 0xff);
-                }
-                if (s->gzhead->hcrc)
-                    strm->adler = crc32(strm->adler, s->pending_buf,
-                                        s->pending);
-                s->gzindex = 0;
-                s->status = EXTRA_STATE;
-            }
-        }
+        /* zlib header */
+        uInt header = (Z_DEFLATED + ((s->w_bits-8)<<4)) << 8;
+        uInt level_flags;
+
+        if (s->strategy >= Z_HUFFMAN_ONLY || s->level < 2)
+            level_flags = 0;
+        else if (s->level < 6)
+            level_flags = 1;
+        else if (s->level == 6)
+            level_flags = 2;
         else
-#endif
-        {
-            uInt header = (Z_DEFLATED + ((s->w_bits-8)<<4)) << 8;
-            uInt level_flags;
-
-            if (s->strategy >= Z_HUFFMAN_ONLY || s->level < 2)
-                level_flags = 0;
-            else if (s->level < 6)
-                level_flags = 1;
-            else if (s->level == 6)
-                level_flags = 2;
-            else
-                level_flags = 3;
-            header |= (level_flags << 6);
-            if (s->strstart != 0) header |= PRESET_DICT;
-            header += 31 - (header % 31);
+            level_flags = 3;
+        header |= (level_flags << 6);
+        if (s->strstart != 0) header |= PRESET_DICT;
+        header += 31 - (header % 31);
+
+        putShortMSB(s, header);
 
+        /* Save the adler32 of the preset dictionary: */
+        if (s->strstart != 0) {
+            putShortMSB(s, (uInt)(strm->adler >> 16));
+            putShortMSB(s, (uInt)(strm->adler & 0xffff));
+        }
+        strm->adler = adler32(0L, Z_NULL, 0);
+        s->status = BUSY_STATE;
+
+        /* Compression must start with an empty pending buffer */
+        flush_pending(strm);
+        if (s->pending != 0) {
+            s->last_flush = -1;
+            return Z_OK;
+        }
+    }
+#ifdef GZIP
+    if (s->status == GZIP_STATE) {
+        /* gzip header */
+        strm->adler = crc32(0L, Z_NULL, 0);
+        put_byte(s, 31);
+        put_byte(s, 139);
+        put_byte(s, 8);
+        if (s->gzhead == Z_NULL) {
+            put_byte(s, 0);
+            put_byte(s, 0);
+            put_byte(s, 0);
+            put_byte(s, 0);
+            put_byte(s, 0);
+            put_byte(s, s->level == 9 ? 2 :
+                     (s->strategy >= Z_HUFFMAN_ONLY || s->level < 2 ?
+                      4 : 0));
+            put_byte(s, OS_CODE);
             s->status = BUSY_STATE;
-            putShortMSB(s, header);
 
-            /* Save the adler32 of the preset dictionary: */
-            if (s->strstart != 0) {
-                putShortMSB(s, (uInt)(strm->adler >> 16));
-                putShortMSB(s, (uInt)(strm->adler & 0xffff));
+            /* Compression must start with an empty pending buffer */
+            flush_pending(strm);
+            if (s->pending != 0) {
+                s->last_flush = -1;
+                return Z_OK;
+            }
+        }
+        else {
+            put_byte(s, (s->gzhead->text ? 1 : 0) +
+                     (s->gzhead->hcrc ? 2 : 0) +
+                     (s->gzhead->extra == Z_NULL ? 0 : 4) +
+                     (s->gzhead->name == Z_NULL ? 0 : 8) +
+                     (s->gzhead->comment == Z_NULL ? 0 : 16)
+                     );
+            put_byte(s, (Byte)(s->gzhead->time & 0xff));
+            put_byte(s, (Byte)((s->gzhead->time >> 8) & 0xff));
+            put_byte(s, (Byte)((s->gzhead->time >> 16) & 0xff));
+            put_byte(s, (Byte)((s->gzhead->time >> 24) & 0xff));
+            put_byte(s, s->level == 9 ? 2 :
+                     (s->strategy >= Z_HUFFMAN_ONLY || s->level < 2 ?
+                      4 : 0));
+            put_byte(s, s->gzhead->os & 0xff);
+            if (s->gzhead->extra != Z_NULL) {
+                put_byte(s, s->gzhead->extra_len & 0xff);
+                put_byte(s, (s->gzhead->extra_len >> 8) & 0xff);
             }
-            strm->adler = adler32(0L, Z_NULL, 0);
+            if (s->gzhead->hcrc)
+                strm->adler = crc32(strm->adler, s->pending_buf,
+                                    s->pending);
+            s->gzindex = 0;
+            s->status = EXTRA_STATE;
         }
     }
-#ifdef GZIP
     if (s->status == EXTRA_STATE) {
         if (s->gzhead->extra != Z_NULL) {
-            uInt beg = s->pending;  /* start of bytes to update crc */
-
-            while (s->gzindex < (s->gzhead->extra_len & 0xffff)) {
-                if (s->pending == s->pending_buf_size) {
-                    if (s->gzhead->hcrc && s->pending > beg)
-                        strm->adler = crc32(strm->adler, s->pending_buf + beg,
-                                            s->pending - beg);
-                    flush_pending(strm);
-                    beg = s->pending;
-                    if (s->pending == s->pending_buf_size)
-                        break;
+            ulg beg = s->pending;   /* start of bytes to update crc */
+            uInt left = (s->gzhead->extra_len & 0xffff) - s->gzindex;
+            while (s->pending + left > s->pending_buf_size) {
+                uInt copy = s->pending_buf_size - s->pending;
+                zmemcpy(s->pending_buf + s->pending,
+                        s->gzhead->extra + s->gzindex, copy);
+                s->pending = s->pending_buf_size;
+                HCRC_UPDATE(beg);
+                s->gzindex += copy;
+                flush_pending(strm);
+                if (s->pending != 0) {
+                    s->last_flush = -1;
+                    return Z_OK;
                 }
-                put_byte(s, s->gzhead->extra[s->gzindex]);
-                s->gzindex++;
-            }
-            if (s->gzhead->hcrc && s->pending > beg)
-                strm->adler = crc32(strm->adler, s->pending_buf + beg,
-                                    s->pending - beg);
-            if (s->gzindex == s->gzhead->extra_len) {
-                s->gzindex = 0;
-                s->status = NAME_STATE;
+                beg = 0;
+                left -= copy;
             }
+            zmemcpy(s->pending_buf + s->pending,
+                    s->gzhead->extra + s->gzindex, left);
+            s->pending += left;
+            HCRC_UPDATE(beg);
+            s->gzindex = 0;
         }
-        else
-            s->status = NAME_STATE;
+        s->status = NAME_STATE;
     }
     if (s->status == NAME_STATE) {
         if (s->gzhead->name != Z_NULL) {
-            uInt beg = s->pending;  /* start of bytes to update crc */
+            ulg beg = s->pending;   /* start of bytes to update crc */
             int val;
-
             do {
                 if (s->pending == s->pending_buf_size) {
-                    if (s->gzhead->hcrc && s->pending > beg)
-                        strm->adler = crc32(strm->adler, s->pending_buf + beg,
-                                            s->pending - beg);
+                    HCRC_UPDATE(beg);
                     flush_pending(strm);
-                    beg = s->pending;
-                    if (s->pending == s->pending_buf_size) {
-                        val = 1;
-                        break;
+                    if (s->pending != 0) {
+                        s->last_flush = -1;
+                        return Z_OK;
                     }
+                    beg = 0;
                 }
                 val = s->gzhead->name[s->gzindex++];
                 put_byte(s, val);
             } while (val != 0);
-            if (s->gzhead->hcrc && s->pending > beg)
-                strm->adler = crc32(strm->adler, s->pending_buf + beg,
-                                    s->pending - beg);
-            if (val == 0) {
-                s->gzindex = 0;
-                s->status = COMMENT_STATE;
-            }
+            HCRC_UPDATE(beg);
+            s->gzindex = 0;
         }
-        else
-            s->status = COMMENT_STATE;
+        s->status = COMMENT_STATE;
     }
     if (s->status == COMMENT_STATE) {
         if (s->gzhead->comment != Z_NULL) {
-            uInt beg = s->pending;  /* start of bytes to update crc */
+            ulg beg = s->pending;   /* start of bytes to update crc */
             int val;
-
             do {
                 if (s->pending == s->pending_buf_size) {
-                    if (s->gzhead->hcrc && s->pending > beg)
-                        strm->adler = crc32(strm->adler, s->pending_buf + beg,
-                                            s->pending - beg);
+                    HCRC_UPDATE(beg);
                     flush_pending(strm);
-                    beg = s->pending;
-                    if (s->pending == s->pending_buf_size) {
-                        val = 1;
-                        break;
+                    if (s->pending != 0) {
+                        s->last_flush = -1;
+                        return Z_OK;
                     }
+                    beg = 0;
                 }
                 val = s->gzhead->comment[s->gzindex++];
                 put_byte(s, val);
             } while (val != 0);
-            if (s->gzhead->hcrc && s->pending > beg)
-                strm->adler = crc32(strm->adler, s->pending_buf + beg,
-                                    s->pending - beg);
-            if (val == 0)
-                s->status = HCRC_STATE;
+            HCRC_UPDATE(beg);
         }
-        else
-            s->status = HCRC_STATE;
+        s->status = HCRC_STATE;
     }
     if (s->status == HCRC_STATE) {
         if (s->gzhead->hcrc) {
-            if (s->pending + 2 > s->pending_buf_size)
+            if (s->pending + 2 > s->pending_buf_size) {
                 flush_pending(strm);
-            if (s->pending + 2 <= s->pending_buf_size) {
-                put_byte(s, (Byte)(strm->adler & 0xff));
-                put_byte(s, (Byte)((strm->adler >> 8) & 0xff));
-                strm->adler = crc32(0L, Z_NULL, 0);
-                s->status = BUSY_STATE;
+                if (s->pending != 0) {
+                    s->last_flush = -1;
+                    return Z_OK;
+                }
             }
+            put_byte(s, (Byte)(strm->adler & 0xff));
+            put_byte(s, (Byte)((strm->adler >> 8) & 0xff));
+            strm->adler = crc32(0L, Z_NULL, 0);
         }
-        else
-            s->status = BUSY_STATE;
-    }
-#endif
+        s->status = BUSY_STATE;
 
-    /* Flush as much pending output as possible */
-    if (s->pending != 0) {
+        /* Compression must start with an empty pending buffer */
         flush_pending(strm);
-        if (strm->avail_out == 0) {
-            /* Since avail_out is 0, deflate will be called again with
-             * more output space, but possibly with both pending and
-             * avail_in equal to zero. There won't be anything to do,
-             * but this is not an error situation so make sure we
-             * return OK instead of BUF_ERROR at next call of deflate:
-             */
+        if (s->pending != 0) {
             s->last_flush = -1;
             return Z_OK;
         }
-
-    /* Make sure there is something to do and avoid duplicate consecutive
-     * flushes. For repeated and useless calls with Z_FINISH, we keep
-     * returning Z_STREAM_END instead of Z_BUF_ERROR.
-     */
-    } else if (strm->avail_in == 0 && RANK(flush) <= RANK(old_flush) &&
-               flush != Z_FINISH) {
-        ERR_RETURN(strm, Z_BUF_ERROR);
-    }
-
-    /* User must not provide more input after the first FINISH: */
-    if (s->status == FINISH_STATE && strm->avail_in != 0) {
-        ERR_RETURN(strm, Z_BUF_ERROR);
     }
+#endif
 
     /* Start a new block or continue the current one.
      */
@@ -900,9 +997,10 @@ int ZEXPORT deflate (strm, flush)
         (flush != Z_NO_FLUSH && s->status != FINISH_STATE)) {
         block_state bstate;
 
-        bstate = s->strategy == Z_HUFFMAN_ONLY ? deflate_huff(s, flush) :
-                    (s->strategy == Z_RLE ? deflate_rle(s, flush) :
-                        (*(configuration_table[s->level].func))(s, flush));
+        bstate = s->level == 0 ? deflate_stored(s, flush) :
+                 s->strategy == Z_HUFFMAN_ONLY ? deflate_huff(s, flush) :
+                 s->strategy == Z_RLE ? deflate_rle(s, flush) :
+                 (*(configuration_table[s->level].func))(s, flush);
 
         if (bstate == finish_started || bstate == finish_done) {
             s->status = FINISH_STATE;
@@ -944,7 +1042,6 @@ int ZEXPORT deflate (strm, flush)
             }
         }
     }
-    Assert(strm->avail_out > 0, "bug2");
 
     if (flush != Z_FINISH) return Z_OK;
     if (s->wrap <= 0) return Z_STREAM_END;
@@ -981,18 +1078,9 @@ int ZEXPORT deflateEnd (strm)
 {
     int status;
 
-    if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+    if (deflateStateCheck(strm)) return Z_STREAM_ERROR;
 
     status = strm->state->status;
-    if (status != INIT_STATE &&
-        status != EXTRA_STATE &&
-        status != NAME_STATE &&
-        status != COMMENT_STATE &&
-        status != HCRC_STATE &&
-        status != BUSY_STATE &&
-        status != FINISH_STATE) {
-      return Z_STREAM_ERROR;
-    }
 
     /* Deallocate in reverse order of allocations: */
     TRY_FREE(strm, strm->state->pending_buf);
@@ -1023,7 +1111,7 @@ int ZEXPORT deflateCopy (dest, source)
     ushf *overlay;
 
 
-    if (source == Z_NULL || dest == Z_NULL || source->state == Z_NULL) {
+    if (deflateStateCheck(source) || dest == Z_NULL) {
         return Z_STREAM_ERROR;
     }
 
@@ -1073,7 +1161,7 @@ int ZEXPORT deflateCopy (dest, source)
  * allocating a large strm->next_in buffer and copying from it.
  * (See also flush_pending()).
  */
-local int read_buf(strm, buf, size)
+local unsigned read_buf(strm, buf, size)
     z_streamp strm;
     Bytef *buf;
     unsigned size;
@@ -1097,7 +1185,7 @@ local int read_buf(strm, buf, size)
     strm->next_in  += len;
     strm->total_in += len;
 
-    return (int)len;
+    return len;
 }
 
 /* ===========================================================================
@@ -1151,9 +1239,9 @@ local uInt longest_match(s, cur_match)
 {
     unsigned chain_length = s->max_chain_length;/* max hash chain length */
     register Bytef *scan = s->window + s->strstart; /* current string */
-    register Bytef *match;                       /* matched string */
+    register Bytef *match;                      /* matched string */
     register int len;                           /* length of current match */
-    int best_len = s->prev_length;              /* best match length so far */
+    int best_len = (int)s->prev_length;         /* best match length so far */
     int nice_match = s->nice_match;             /* stop if match long enough */
     IPos limit = s->strstart > (IPos)MAX_DIST(s) ?
         s->strstart - (IPos)MAX_DIST(s) : NIL;
@@ -1188,7 +1276,7 @@ local uInt longest_match(s, cur_match)
     /* Do not look for matches beyond the end of the input. This is necessary
      * to make deflate deterministic.
      */
-    if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead;
+    if ((uInt)nice_match > s->lookahead) nice_match = (int)s->lookahead;
 
     Assert((ulg)s->strstart <= s->window_size-MIN_LOOKAHEAD, "need lookahead");
 
@@ -1349,7 +1437,11 @@ local uInt longest_match(s, cur_match)
 
 #endif /* FASTEST */
 
-#ifdef DEBUG
+#ifdef ZLIB_DEBUG
+
+#define EQUAL 0
+/* result of memcmp for equal strings */
+
 /* ===========================================================================
  * Check that the match at match_start is indeed a match.
  */
@@ -1375,7 +1467,7 @@ local void check_match(s, start, match, length)
 }
 #else
 #  define check_match(s, start, match, length)
-#endif /* DEBUG */
+#endif /* ZLIB_DEBUG */
 
 /* ===========================================================================
  * Fill the window when the lookahead becomes insufficient.
@@ -1390,8 +1482,7 @@ local void check_match(s, start, match, length)
 local void fill_window(s)
     deflate_state *s;
 {
-    register unsigned n, m;
-    register Posf *p;
+    unsigned n;
     unsigned more;    /* Amount of free space at the end of the window. */
     uInt wsize = s->w_size;
 
@@ -1418,35 +1509,11 @@ local void fill_window(s)
          */
         if (s->strstart >= wsize+MAX_DIST(s)) {
 
-            zmemcpy(s->window, s->window+wsize, (unsigned)wsize);
+            zmemcpy(s->window, s->window+wsize, (unsigned)wsize - more);
             s->match_start -= wsize;
             s->strstart    -= wsize; /* we now have strstart >= MAX_DIST */
             s->block_start -= (long) wsize;
-
-            /* Slide the hash table (could be avoided with 32 bit values
-               at the expense of memory usage). We slide even when level == 0
-               to keep the hash table consistent if we switch back to level > 0
-               later. (Using level 0 permanently is not an optimal usage of
-               zlib, so we don't care about this pathological case.)
-             */
-            n = s->hash_size;
-            p = &s->head[n];
-            do {
-                m = *--p;
-                *p = (Pos)(m >= wsize ? m-wsize : NIL);
-            } while (--n);
-
-            n = wsize;
-#ifndef FASTEST
-            p = &s->prev[n];
-            do {
-                m = *--p;
-                *p = (Pos)(m >= wsize ? m-wsize : NIL);
-                /* If n is not on any hash chain, prev[n] is garbage but
-                 * its value will never be used.
-                 */
-            } while (--n);
-#endif
+            slide_hash(s);
             more += wsize;
         }
         if (s->strm->avail_in == 0) break;
@@ -1552,70 +1619,199 @@ local void fill_window(s)
    if (s->strm->avail_out == 0) return (last) ? finish_started : need_more; \
 }
 
+/* Maximum stored block length in deflate format (not including header). */
+#define MAX_STORED 65535
+
+/* Minimum of a and b. */
+#define MIN(a, b) ((a) > (b) ? (b) : (a))
+
 /* ===========================================================================
  * Copy without compression as much as possible from the input stream, return
  * the current block state.
- * This function does not insert new strings in the dictionary since
- * uncompressible data is probably not useful. This function is used
- * only for the level=0 compression option.
- * NOTE: this function should be optimized to avoid extra copying from
- * window to pending_buf.
+ *
+ * In case deflateParams() is used to later switch to a non-zero compression
+ * level, s->matches (otherwise unused when storing) keeps track of the number
+ * of hash table slides to perform. If s->matches is 1, then one hash table
+ * slide will be done when switching. If s->matches is 2, the maximum value
+ * allowed here, then the hash table will be cleared, since two or more slides
+ * is the same as a clear.
+ *
+ * deflate_stored() is written to minimize the number of times an input byte is
+ * copied. It is most efficient with large input and output buffers, which
+ * maximizes the opportunites to have a single copy from next_in to next_out.
  */
 local block_state deflate_stored(s, flush)
     deflate_state *s;
     int flush;
 {
-    /* Stored blocks are limited to 0xffff bytes, pending_buf is limited
-     * to pending_buf_size, and each stored block has a 5 byte header:
+    /* Smallest worthy block size when not flushing or finishing. By default
+     * this is 32K. This can be as small as 507 bytes for memLevel == 1. For
+     * large input and output buffers, the stored block size will be larger.
      */
-    ulg max_block_size = 0xffff;
-    ulg max_start;
-
-    if (max_block_size > s->pending_buf_size - 5) {
-        max_block_size = s->pending_buf_size - 5;
-    }
+    unsigned min_block = MIN(s->pending_buf_size - 5, s->w_size);
 
-    /* Copy as much as possible from input to output: */
-    for (;;) {
-        /* Fill the window as much as possible: */
-        if (s->lookahead <= 1) {
-
-            Assert(s->strstart < s->w_size+MAX_DIST(s) ||
-                   s->block_start >= (long)s->w_size, "slide too late");
+    /* Copy as many min_block or larger stored blocks directly to next_out as
+     * possible. If flushing, copy the remaining available input to next_out as
+     * stored blocks, if there is enough space.
+     */
+    unsigned len, left, have, last = 0;
+    unsigned used = s->strm->avail_in;
+    do {
+        /* Set len to the maximum size block that we can copy directly with the
+         * available input data and output space. Set left to how much of that
+         * would be copied from what's left in the window.
+         */
+        len = MAX_STORED;       /* maximum deflate stored block length */
+        have = (s->bi_valid + 42) >> 3;         /* number of header bytes */
+        if (s->strm->avail_out < have)          /* need room for header */
+            break;
+            /* maximum stored block length that will fit in avail_out: */
+        have = s->strm->avail_out - have;
+        left = s->strstart - s->block_start;    /* bytes left in window */
+        if (len > (ulg)left + s->strm->avail_in)
+            len = left + s->strm->avail_in;     /* limit len to the input */
+        if (len > have)
+            len = have;                         /* limit len to the output */
+
+        /* If the stored block would be less than min_block in length, or if
+         * unable to copy all of the available input when flushing, then try
+         * copying to the window and the pending buffer instead. Also don't
+         * write an empty block when flushing -- deflate() does that.
+         */
+        if (len < min_block && ((len == 0 && flush != Z_FINISH) ||
+                                flush == Z_NO_FLUSH ||
+                                len != left + s->strm->avail_in))
+            break;
 
-            fill_window(s);
-            if (s->lookahead == 0 && flush == Z_NO_FLUSH) return need_more;
+        /* Make a dummy stored block in pending to get the header bytes,
+         * including any pending bits. This also updates the debugging counts.
+         */
+        last = flush == Z_FINISH && len == left + s->strm->avail_in ? 1 : 0;
+        _tr_stored_block(s, (char *)0, 0L, last);
+
+        /* Replace the lengths in the dummy stored block with len. */
+        s->pending_buf[s->pending - 4] = len;
+        s->pending_buf[s->pending - 3] = len >> 8;
+        s->pending_buf[s->pending - 2] = ~len;
+        s->pending_buf[s->pending - 1] = ~len >> 8;
+
+        /* Write the stored block header bytes. */
+        flush_pending(s->strm);
+
+#ifdef ZLIB_DEBUG
+        /* Update debugging counts for the data about to be copied. */
+        s->compressed_len += len << 3;
+        s->bits_sent += len << 3;
+#endif
 
-            if (s->lookahead == 0) break; /* flush the current block */
+        /* Copy uncompressed bytes from the window to next_out. */
+        if (left) {
+            if (left > len)
+                left = len;
+            zmemcpy(s->strm->next_out, s->window + s->block_start, left);
+            s->strm->next_out += left;
+            s->strm->avail_out -= left;
+            s->strm->total_out += left;
+            s->block_start += left;
+            len -= left;
         }
-        Assert(s->block_start >= 0L, "block gone");
-
-        s->strstart += s->lookahead;
-        s->lookahead = 0;
-
-        /* Emit a stored block if pending_buf will be full: */
-        max_start = s->block_start + max_block_size;
-        if (s->strstart == 0 || (ulg)s->strstart >= max_start) {
-            /* strstart == 0 is possible when wraparound on 16-bit machine */
-            s->lookahead = (uInt)(s->strstart - max_start);
-            s->strstart = (uInt)max_start;
-            FLUSH_BLOCK(s, 0);
+
+        /* Copy uncompressed bytes directly from next_in to next_out, updating
+         * the check value.
+         */
+        if (len) {
+            read_buf(s->strm, s->strm->next_out, len);
+            s->strm->next_out += len;
+            s->strm->avail_out -= len;
+            s->strm->total_out += len;
         }
-        /* Flush if we may have to slide, otherwise block_start may become
-         * negative and the data will be gone:
+    } while (last == 0);
+
+    /* Update the sliding window with the last s->w_size bytes of the copied
+     * data, or append all of the copied data to the existing window if less
+     * than s->w_size bytes were copied. Also update the number of bytes to
+     * insert in the hash tables, in the event that deflateParams() switches to
+     * a non-zero compression level.
+     */
+    used -= s->strm->avail_in;      /* number of input bytes directly copied */
+    if (used) {
+        /* If any input was used, then no unused input remains in the window,
+         * therefore s->block_start == s->strstart.
          */
-        if (s->strstart - (uInt)s->block_start >= MAX_DIST(s)) {
-            FLUSH_BLOCK(s, 0);
+        if (used >= s->w_size) {    /* supplant the previous history */
+            s->matches = 2;         /* clear hash */
+            zmemcpy(s->window, s->strm->next_in - s->w_size, s->w_size);
+            s->strstart = s->w_size;
         }
+        else {
+            if (s->window_size - s->strstart <= used) {
+                /* Slide the window down. */
+                s->strstart -= s->w_size;
+                zmemcpy(s->window, s->window + s->w_size, s->strstart);
+                if (s->matches < 2)
+                    s->matches++;   /* add a pending slide_hash() */
+            }
+            zmemcpy(s->window + s->strstart, s->strm->next_in - used, used);
+            s->strstart += used;
+        }
+        s->block_start = s->strstart;
+        s->insert += MIN(used, s->w_size - s->insert);
     }
-    s->insert = 0;
-    if (flush == Z_FINISH) {
-        FLUSH_BLOCK(s, 1);
+    if (s->high_water < s->strstart)
+        s->high_water = s->strstart;
+
+    /* If the last block was written to next_out, then done. */
+    if (last)
         return finish_done;
+
+    /* If flushing and all input has been consumed, then done. */
+    if (flush != Z_NO_FLUSH && flush != Z_FINISH &&
+        s->strm->avail_in == 0 && (long)s->strstart == s->block_start)
+        return block_done;
+
+    /* Fill the window with any remaining input. */
+    have = s->window_size - s->strstart - 1;
+    if (s->strm->avail_in > have && s->block_start >= (long)s->w_size) {
+        /* Slide the window down. */
+        s->block_start -= s->w_size;
+        s->strstart -= s->w_size;
+        zmemcpy(s->window, s->window + s->w_size, s->strstart);
+        if (s->matches < 2)
+            s->matches++;           /* add a pending slide_hash() */
+        have += s->w_size;          /* more space now */
     }
-    if ((long)s->strstart > s->block_start)
-        FLUSH_BLOCK(s, 0);
-    return block_done;
+    if (have > s->strm->avail_in)
+        have = s->strm->avail_in;
+    if (have) {
+        read_buf(s->strm, s->window + s->strstart, have);
+        s->strstart += have;
+    }
+    if (s->high_water < s->strstart)
+        s->high_water = s->strstart;
+
+    /* There was not enough avail_out to write a complete worthy or flushed
+     * stored block to next_out. Write a stored block to pending instead, if we
+     * have enough input for a worthy block, or if flushing and there is enough
+     * room for the remaining input as a stored block in the pending buffer.
+     */
+    have = (s->bi_valid + 42) >> 3;         /* number of header bytes */
+        /* maximum stored block length that will fit in pending: */
+    have = MIN(s->pending_buf_size - have, MAX_STORED);
+    min_block = MIN(have, s->w_size);
+    left = s->strstart - s->block_start;
+    if (left >= min_block ||
+        ((left || flush == Z_FINISH) && flush != Z_NO_FLUSH &&
+         s->strm->avail_in == 0 && left <= have)) {
+        len = MIN(left, have);
+        last = flush == Z_FINISH && s->strm->avail_in == 0 &&
+               len == left ? 1 : 0;
+        _tr_stored_block(s, (charf *)s->window + s->block_start, len, last);
+        s->block_start += len;
+        flush_pending(s->strm);
+    }
+
+    /* We've done all we can with the available input and output. */
+    return last ? finish_started : need_more;
 }
 
 /* ===========================================================================
@@ -1892,7 +2088,7 @@ local block_state deflate_rle(s, flush)
                          prev == *++scan && prev == *++scan &&
                          prev == *++scan && prev == *++scan &&
                          scan < strend);
-                s->match_length = MAX_MATCH - (int)(strend - scan);
+                s->match_length = MAX_MATCH - (uInt)(strend - scan);
                 if (s->match_length > s->lookahead)
                     s->match_length = s->lookahead;
             }
diff --git a/deps/zlib/deflate.h b/deps/zlib/deflate.h
index a17c836..23ecdd3 100644
--- a/deps/zlib/deflate.h
+++ b/deps/zlib/deflate.h
@@ -1,5 +1,5 @@
 /* deflate.h -- internal compression state
- * Copyright (C) 1995-2012 Jean-loup Gailly
+ * Copyright (C) 1995-2016 Jean-loup Gailly
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
@@ -51,13 +51,16 @@
 #define Buf_size 16
 /* size of bit buffer in bi_buf */
 
-#define INIT_STATE    42
-#define EXTRA_STATE   69
-#define NAME_STATE    73
-#define COMMENT_STATE 91
-#define HCRC_STATE   103
-#define BUSY_STATE   113
-#define FINISH_STATE 666
+#define INIT_STATE    42    /* zlib header -> BUSY_STATE */
+#ifdef GZIP
+#  define GZIP_STATE  57    /* gzip header -> BUSY_STATE | EXTRA_STATE */
+#endif
+#define EXTRA_STATE   69    /* gzip extra block -> NAME_STATE */
+#define NAME_STATE    73    /* gzip file name -> COMMENT_STATE */
+#define COMMENT_STATE 91    /* gzip comment -> HCRC_STATE */
+#define HCRC_STATE   103    /* gzip header CRC -> BUSY_STATE */
+#define BUSY_STATE   113    /* deflate -> FINISH_STATE */
+#define FINISH_STATE 666    /* stream complete */
 /* Stream status */
 
 
@@ -83,7 +86,7 @@ typedef struct static_tree_desc_s  static_tree_desc;
 typedef struct tree_desc_s {
     ct_data *dyn_tree;           /* the dynamic tree */
     int     max_code;            /* largest code with non zero frequency */
-    static_tree_desc *stat_desc; /* the corresponding static tree */
+    const static_tree_desc *stat_desc;  /* the corresponding static tree */
 } FAR tree_desc;
 
 typedef ush Pos;
@@ -100,10 +103,10 @@ typedef struct internal_state {
     Bytef *pending_buf;  /* output still pending */
     ulg   pending_buf_size; /* size of pending_buf */
     Bytef *pending_out;  /* next pending byte to output to the stream */
-    uInt   pending;      /* nb of bytes in the pending buffer */
+    ulg   pending;       /* nb of bytes in the pending buffer */
     int   wrap;          /* bit 0 true for zlib, bit 1 true for gzip */
     gz_headerp  gzhead;  /* gzip header information to write */
-    uInt   gzindex;      /* where in extra, name, or comment */
+    ulg   gzindex;       /* where in extra, name, or comment */
     Byte  method;        /* can only be DEFLATED */
     int   last_flush;    /* value of flush param for previous deflate call */
 
@@ -249,7 +252,7 @@ typedef struct internal_state {
     uInt matches;       /* number of string matches in current block */
     uInt insert;        /* bytes at end of window left to insert */
 
-#ifdef DEBUG
+#ifdef ZLIB_DEBUG
     ulg compressed_len; /* total bit length of compressed file mod 2^32 */
     ulg bits_sent;      /* bit length of compressed data sent mod 2^32 */
 #endif
@@ -275,7 +278,7 @@ typedef struct internal_state {
 /* Output a byte on the stream.
  * IN assertion: there is enough room in pending_buf.
  */
-#define put_byte(s, c) {s->pending_buf[s->pending++] = (c);}
+#define put_byte(s, c) {s->pending_buf[s->pending++] = (Bytef)(c);}
 
 
 #define MIN_LOOKAHEAD (MAX_MATCH+MIN_MATCH+1)
@@ -309,7 +312,7 @@ void ZLIB_INTERNAL _tr_stored_block OF((deflate_state *s, charf *buf,
  * used.
  */
 
-#ifndef DEBUG
+#ifndef ZLIB_DEBUG
 /* Inline versions of _tr_tally for speed: */
 
 #if defined(GEN_TREES_H) || !defined(STDC)
@@ -321,7 +324,7 @@ void ZLIB_INTERNAL _tr_stored_block OF((deflate_state *s, charf *buf,
 #endif
 
 # define _tr_tally_lit(s, c, flush) \
-  { uch cc = (uch)(c); \
+  { uch cc = (c); \
     s->d_buf[s->last_lit] = 0; \
     s->l_buf[s->last_lit++] = cc; \
     s->dyn_ltree[cc].Freq++; \
diff --git a/deps/zlib/gzguts.h b/deps/zlib/gzguts.h
new file mode 100644
index 0000000..990a4d2
--- /dev/null
+++ b/deps/zlib/gzguts.h
@@ -0,0 +1,218 @@
+/* gzguts.h -- zlib internal header definitions for gz* operations
+ * Copyright (C) 2004, 2005, 2010, 2011, 2012, 2013, 2016 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+#ifdef _LARGEFILE64_SOURCE
+#  ifndef _LARGEFILE_SOURCE
+#    define _LARGEFILE_SOURCE 1
+#  endif
+#  ifdef _FILE_OFFSET_BITS
+#    undef _FILE_OFFSET_BITS
+#  endif
+#endif
+
+#ifdef HAVE_HIDDEN
+#  define ZLIB_INTERNAL __attribute__((visibility ("hidden")))
+#else
+#  define ZLIB_INTERNAL
+#endif
+
+#include <stdio.h>
+#include "zlib.h"
+#ifdef STDC
+#  include <string.h>
+#  include <stdlib.h>
+#  include <limits.h>
+#endif
+
+#ifndef _POSIX_SOURCE
+#  define _POSIX_SOURCE
+#endif
+#include <fcntl.h>
+
+#ifdef _WIN32
+#  include <stddef.h>
+#endif
+
+#if defined(__TURBOC__) || defined(_MSC_VER) || defined(_WIN32)
+#  include <io.h>
+#endif
+
+#if defined(_WIN32) || defined(__CYGWIN__)
+#  define WIDECHAR
+#endif
+
+#ifdef WINAPI_FAMILY
+#  define open _open
+#  define read _read
+#  define write _write
+#  define close _close
+#endif
+
+#ifdef NO_DEFLATE       /* for compatibility with old definition */
+#  define NO_GZCOMPRESS
+#endif
+
+#if defined(STDC99) || (defined(__TURBOC__) && __TURBOC__ >= 0x550)
+#  ifndef HAVE_VSNPRINTF
+#    define HAVE_VSNPRINTF
+#  endif
+#endif
+
+#if defined(__CYGWIN__)
+#  ifndef HAVE_VSNPRINTF
+#    define HAVE_VSNPRINTF
+#  endif
+#endif
+
+#if defined(MSDOS) && defined(__BORLANDC__) && (BORLANDC > 0x410)
+#  ifndef HAVE_VSNPRINTF
+#    define HAVE_VSNPRINTF
+#  endif
+#endif
+
+#ifndef HAVE_VSNPRINTF
+#  ifdef MSDOS
+/* vsnprintf may exist on some MS-DOS compilers (DJGPP?),
+   but for now we just assume it doesn't. */
+#    define NO_vsnprintf
+#  endif
+#  ifdef __TURBOC__
+#    define NO_vsnprintf
+#  endif
+#  ifdef WIN32
+/* In Win32, vsnprintf is available as the "non-ANSI" _vsnprintf. */
+#    if !defined(vsnprintf) && !defined(NO_vsnprintf)
+#      if !defined(_MSC_VER) || ( defined(_MSC_VER) && _MSC_VER < 1500 )
+#         define vsnprintf _vsnprintf
+#      endif
+#    endif
+#  endif
+#  ifdef __SASC
+#    define NO_vsnprintf
+#  endif
+#  ifdef VMS
+#    define NO_vsnprintf
+#  endif
+#  ifdef __OS400__
+#    define NO_vsnprintf
+#  endif
+#  ifdef __MVS__
+#    define NO_vsnprintf
+#  endif
+#endif
+
+/* unlike snprintf (which is required in C99), _snprintf does not guarantee
+   null termination of the result -- however this is only used in gzlib.c where
+   the result is assured to fit in the space provided */
+#if defined(_MSC_VER) && _MSC_VER < 1900
+#  define snprintf _snprintf
+#endif
+
+#ifndef local
+#  define local static
+#endif
+/* since "static" is used to mean two completely different things in C, we
+   define "local" for the non-static meaning of "static", for readability
+   (compile with -Dlocal if your debugger can't find static symbols) */
+
+/* gz* functions always use library allocation functions */
+#ifndef STDC
+  extern voidp  malloc OF((uInt size));
+  extern void   free   OF((voidpf ptr));
+#endif
+
+/* get errno and strerror definition */
+#if defined UNDER_CE
+#  include <windows.h>
+#  define zstrerror() gz_strwinerror((DWORD)GetLastError())
+#else
+#  ifndef NO_STRERROR
+#    include <errno.h>
+#    define zstrerror() strerror(errno)
+#  else
+#    define zstrerror() "stdio error (consult errno)"
+#  endif
+#endif
+
+/* provide prototypes for these when building zlib without LFS */
+#if !defined(_LARGEFILE64_SOURCE) || _LFS64_LARGEFILE-0 == 0
+    ZEXTERN gzFile ZEXPORT gzopen64 OF((const char *, const char *));
+    ZEXTERN z_off64_t ZEXPORT gzseek64 OF((gzFile, z_off64_t, int));
+    ZEXTERN z_off64_t ZEXPORT gztell64 OF((gzFile));
+    ZEXTERN z_off64_t ZEXPORT gzoffset64 OF((gzFile));
+#endif
+
+/* default memLevel */
+#if MAX_MEM_LEVEL >= 8
+#  define DEF_MEM_LEVEL 8
+#else
+#  define DEF_MEM_LEVEL  MAX_MEM_LEVEL
+#endif
+
+/* default i/o buffer size -- double this for output when reading (this and
+   twice this must be able to fit in an unsigned type) */
+#define GZBUFSIZE 8192
+
+/* gzip modes, also provide a little integrity check on the passed structure */
+#define GZ_NONE 0
+#define GZ_READ 7247
+#define GZ_WRITE 31153
+#define GZ_APPEND 1     /* mode set to GZ_WRITE after the file is opened */
+
+/* values for gz_state how */
+#define LOOK 0      /* look for a gzip header */
+#define COPY 1      /* copy input directly */
+#define GZIP 2      /* decompress a gzip stream */
+
+/* internal gzip file state data structure */
+typedef struct {
+        /* exposed contents for gzgetc() macro */
+    struct gzFile_s x;      /* "x" for exposed */
+                            /* x.have: number of bytes available at x.next */
+                            /* x.next: next output data to deliver or write */
+                            /* x.pos: current position in uncompressed data */
+        /* used for both reading and writing */
+    int mode;               /* see gzip modes above */
+    int fd;                 /* file descriptor */
+    char *path;             /* path or fd for error messages */
+    unsigned size;          /* buffer size, zero if not allocated yet */
+    unsigned want;          /* requested buffer size, default is GZBUFSIZE */
+    unsigned char *in;      /* input buffer (double-sized when writing) */
+    unsigned char *out;     /* output buffer (double-sized when reading) */
+    int direct;             /* 0 if processing gzip, 1 if transparent */
+        /* just for reading */
+    int how;                /* 0: get header, 1: copy, 2: decompress */
+    z_off64_t start;        /* where the gzip data started, for rewinding */
+    int eof;                /* true if end of input file reached */
+    int past;               /* true if read requested past end */
+        /* just for writing */
+    int level;              /* compression level */
+    int strategy;           /* compression strategy */
+        /* seek request */
+    z_off64_t skip;         /* amount to skip (already rewound if backwards) */
+    int seek;               /* true if seek request pending */
+        /* error information */
+    int err;                /* error code */
+    char *msg;              /* error message */
+        /* zlib inflate or deflate stream */
+    z_stream strm;          /* stream structure in-place (not a pointer) */
+} gz_state;
+typedef gz_state FAR *gz_statep;
+
+/* shared functions */
+void ZLIB_INTERNAL gz_error OF((gz_statep, int, const char *));
+#if defined UNDER_CE
+char ZLIB_INTERNAL *gz_strwinerror OF((DWORD error));
+#endif
+
+/* GT_OFF(x), where x is an unsigned value, is true if x > maximum z_off64_t
+   value -- needed when comparing unsigned to z_off64_t, which is signed
+   (possible z_off64_t types off_t, off64_t, and long are all signed) */
+#ifdef INT_MAX
+#  define GT_OFF(x) (sizeof(int) == sizeof(z_off64_t) && (x) > INT_MAX)
+#else
+unsigned ZLIB_INTERNAL gz_intmax OF((void));
+#  define GT_OFF(x) (sizeof(int) == sizeof(z_off64_t) && (x) > gz_intmax())
+#endif
diff --git a/deps/zlib/infback.c b/deps/zlib/infback.c
index f3833c2..59679ec 100644
--- a/deps/zlib/infback.c
+++ b/deps/zlib/infback.c
@@ -1,5 +1,5 @@
 /* infback.c -- inflate using a call-back interface
- * Copyright (C) 1995-2011 Mark Adler
+ * Copyright (C) 1995-2016 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
@@ -61,7 +61,7 @@ int stream_size;
     Tracev((stderr, "inflate: allocated\n"));
     strm->state = (struct internal_state FAR *)state;
     state->dmax = 32768U;
-    state->wbits = windowBits;
+    state->wbits = (uInt)windowBits;
     state->wsize = 1U << windowBits;
     state->window = window;
     state->wnext = 0;
diff --git a/deps/zlib/inffast.c b/deps/zlib/inffast.c
index bda59ce..0dbd1db 100644
--- a/deps/zlib/inffast.c
+++ b/deps/zlib/inffast.c
@@ -1,5 +1,5 @@
 /* inffast.c -- fast decoding
- * Copyright (C) 1995-2008, 2010, 2013 Mark Adler
+ * Copyright (C) 1995-2017 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
@@ -8,26 +8,9 @@
 #include "inflate.h"
 #include "inffast.h"
 
-#ifndef ASMINF
-
-/* Allow machine dependent optimization for post-increment or pre-increment.
-   Based on testing to date,
-   Pre-increment preferred for:
-   - PowerPC G3 (Adler)
-   - MIPS R5000 (Randers-Pehrson)
-   Post-increment preferred for:
-   - none
-   No measurable difference:
-   - Pentium III (Anderson)
-   - M68060 (Nikl)
- */
-#ifdef POSTINC
-#  define OFF 0
-#  define PUP(a) *(a)++
+#ifdef ASMINF
+#  pragma message("Assembler code may have bugs -- use at your own risk")
 #else
-#  define OFF 1
-#  define PUP(a) *++(a)
-#endif
 
 /*
    Decode literal, length, and distance codes and write out the resulting
@@ -96,9 +79,9 @@ unsigned start;         /* inflate()'s starting value for strm->avail_out */
 
     /* copy state to local variables */
     state = (struct inflate_state FAR *)strm->state;
-    in = strm->next_in - OFF;
+    in = strm->next_in;
     last = in + (strm->avail_in - 5);
-    out = strm->next_out - OFF;
+    out = strm->next_out;
     beg = out - (start - strm->avail_out);
     end = out + (strm->avail_out - 257);
 #ifdef INFLATE_STRICT
@@ -119,9 +102,9 @@ unsigned start;         /* inflate()'s starting value for strm->avail_out */
        input data or output space */
     do {
         if (bits < 15) {
-            hold += (unsigned long)(PUP(in)) << bits;
+            hold += (unsigned long)(*in++) << bits;
             bits += 8;
-            hold += (unsigned long)(PUP(in)) << bits;
+            hold += (unsigned long)(*in++) << bits;
             bits += 8;
         }
         here = lcode[hold & lmask];
@@ -134,14 +117,14 @@ unsigned start;         /* inflate()'s starting value for strm->avail_out */
             Tracevv((stderr, here.val >= 0x20 && here.val < 0x7f ?
                     "inflate:         literal '%c'\n" :
                     "inflate:         literal 0x%02x\n", here.val));
-            PUP(out) = (unsigned char)(here.val);
+            *out++ = (unsigned char)(here.val);
         }
         else if (op & 16) {                     /* length base */
             len = (unsigned)(here.val);
             op &= 15;                           /* number of extra bits */
             if (op) {
                 if (bits < op) {
-                    hold += (unsigned long)(PUP(in)) << bits;
+                    hold += (unsigned long)(*in++) << bits;
                     bits += 8;
                 }
                 len += (unsigned)hold & ((1U << op) - 1);
@@ -150,9 +133,9 @@ unsigned start;         /* inflate()'s starting value for strm->avail_out */
             }
             Tracevv((stderr, "inflate:         length %u\n", len));
             if (bits < 15) {
-                hold += (unsigned long)(PUP(in)) << bits;
+                hold += (unsigned long)(*in++) << bits;
                 bits += 8;
-                hold += (unsigned long)(PUP(in)) << bits;
+                hold += (unsigned long)(*in++) << bits;
                 bits += 8;
             }
             here = dcode[hold & dmask];
@@ -165,10 +148,10 @@ unsigned start;         /* inflate()'s starting value for strm->avail_out */
                 dist = (unsigned)(here.val);
                 op &= 15;                       /* number of extra bits */
                 if (bits < op) {
-                    hold += (unsigned long)(PUP(in)) << bits;
+                    hold += (unsigned long)(*in++) << bits;
                     bits += 8;
                     if (bits < op) {
-                        hold += (unsigned long)(PUP(in)) << bits;
+                        hold += (unsigned long)(*in++) << bits;
                         bits += 8;
                     }
                 }
@@ -196,30 +179,30 @@ unsigned start;         /* inflate()'s starting value for strm->avail_out */
 #ifdef INFLATE_ALLOW_INVALID_DISTANCE_TOOFAR_ARRR
                         if (len <= op - whave) {
                             do {
-                                PUP(out) = 0;
+                                *out++ = 0;
                             } while (--len);
                             continue;
                         }
                         len -= op - whave;
                         do {
-                            PUP(out) = 0;
+                            *out++ = 0;
                         } while (--op > whave);
                         if (op == 0) {
                             from = out - dist;
                             do {
-                                PUP(out) = PUP(from);
+                                *out++ = *from++;
                             } while (--len);
                             continue;
                         }
 #endif
                     }
-                    from = window - OFF;
+                    from = window;
                     if (wnext == 0) {           /* very common case */
                         from += wsize - op;
                         if (op < len) {         /* some from window */
                             len -= op;
                             do {
-                                PUP(out) = PUP(from);
+                                *out++ = *from++;
                             } while (--op);
                             from = out - dist;  /* rest from output */
                         }
@@ -230,14 +213,14 @@ unsigned start;         /* inflate()'s starting value for strm->avail_out */
                         if (op < len) {         /* some from end of window */
                             len -= op;
                             do {
-                                PUP(out) = PUP(from);
+                                *out++ = *from++;
                             } while (--op);
-                            from = window - OFF;
+                            from = window;
                             if (wnext < len) {  /* some from start of window */
                                 op = wnext;
                                 len -= op;
                                 do {
-                                    PUP(out) = PUP(from);
+                                    *out++ = *from++;
                                 } while (--op);
                                 from = out - dist;      /* rest from output */
                             }
@@ -248,35 +231,35 @@ unsigned start;         /* inflate()'s starting value for strm->avail_out */
                         if (op < len) {         /* some from window */
                             len -= op;
                             do {
-                                PUP(out) = PUP(from);
+                                *out++ = *from++;
                             } while (--op);
                             from = out - dist;  /* rest from output */
                         }
                     }
                     while (len > 2) {
-                        PUP(out) = PUP(from);
-                        PUP(out) = PUP(from);
-                        PUP(out) = PUP(from);
+                        *out++ = *from++;
+                        *out++ = *from++;
+                        *out++ = *from++;
                         len -= 3;
                     }
                     if (len) {
-                        PUP(out) = PUP(from);
+                        *out++ = *from++;
                         if (len > 1)
-                            PUP(out) = PUP(from);
+                            *out++ = *from++;
                     }
                 }
                 else {
                     from = out - dist;          /* copy direct from output */
                     do {                        /* minimum length is three */
-                        PUP(out) = PUP(from);
-                        PUP(out) = PUP(from);
-                        PUP(out) = PUP(from);
+                        *out++ = *from++;
+                        *out++ = *from++;
+                        *out++ = *from++;
                         len -= 3;
                     } while (len > 2);
                     if (len) {
-                        PUP(out) = PUP(from);
+                        *out++ = *from++;
                         if (len > 1)
-                            PUP(out) = PUP(from);
+                            *out++ = *from++;
                     }
                 }
             }
@@ -313,8 +296,8 @@ unsigned start;         /* inflate()'s starting value for strm->avail_out */
     hold &= (1U << bits) - 1;
 
     /* update state and return */
-    strm->next_in = in + OFF;
-    strm->next_out = out + OFF;
+    strm->next_in = in;
+    strm->next_out = out;
     strm->avail_in = (unsigned)(in < last ? 5 + (last - in) : 5 - (in - last));
     strm->avail_out = (unsigned)(out < end ?
                                  257 + (end - out) : 257 - (out - end));
diff --git a/deps/zlib/inflate.c b/deps/zlib/inflate.c
index 870f89b..ac333e8 100644
--- a/deps/zlib/inflate.c
+++ b/deps/zlib/inflate.c
@@ -1,5 +1,5 @@
 /* inflate.c -- zlib decompression
- * Copyright (C) 1995-2012 Mark Adler
+ * Copyright (C) 1995-2016 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
@@ -92,6 +92,7 @@
 #endif
 
 /* function prototypes */
+local int inflateStateCheck OF((z_streamp strm));
 local void fixedtables OF((struct inflate_state FAR *state));
 local int updatewindow OF((z_streamp strm, const unsigned char FAR *end,
                            unsigned copy));
@@ -101,12 +102,26 @@ local int updatewindow OF((z_streamp strm, const unsigned char FAR *end,
 local unsigned syncsearch OF((unsigned FAR *have, const unsigned char FAR *buf,
                               unsigned len));
 
+local int inflateStateCheck(strm)
+z_streamp strm;
+{
+    struct inflate_state FAR *state;
+    if (strm == Z_NULL ||
+        strm->zalloc == (alloc_func)0 || strm->zfree == (free_func)0)
+        return 1;
+    state = (struct inflate_state FAR *)strm->state;
+    if (state == Z_NULL || state->strm != strm ||
+        state->mode < HEAD || state->mode > SYNC)
+        return 1;
+    return 0;
+}
+
 int ZEXPORT inflateResetKeep(strm)
 z_streamp strm;
 {
     struct inflate_state FAR *state;
 
-    if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+    if (inflateStateCheck(strm)) return Z_STREAM_ERROR;
     state = (struct inflate_state FAR *)strm->state;
     strm->total_in = strm->total_out = state->total = 0;
     strm->msg = Z_NULL;
@@ -131,7 +146,7 @@ z_streamp strm;
 {
     struct inflate_state FAR *state;
 
-    if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+    if (inflateStateCheck(strm)) return Z_STREAM_ERROR;
     state = (struct inflate_state FAR *)strm->state;
     state->wsize = 0;
     state->whave = 0;
@@ -147,7 +162,7 @@ int windowBits;
     struct inflate_state FAR *state;
 
     /* get the state */
-    if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+    if (inflateStateCheck(strm)) return Z_STREAM_ERROR;
     state = (struct inflate_state FAR *)strm->state;
 
     /* extract wrap request from windowBits parameter */
@@ -156,7 +171,7 @@ int windowBits;
         windowBits = -windowBits;
     }
     else {
-        wrap = (windowBits >> 4) + 1;
+        wrap = (windowBits >> 4) + 5;
 #ifdef GUNZIP
         if (windowBits < 48)
             windowBits &= 15;
@@ -210,7 +225,9 @@ int stream_size;
     if (state == Z_NULL) return Z_MEM_ERROR;
     Tracev((stderr, "inflate: allocated\n"));
     strm->state = (struct internal_state FAR *)state;
+    state->strm = strm;
     state->window = Z_NULL;
+    state->mode = HEAD;     /* to pass state test in inflateReset2() */
     ret = inflateReset2(strm, windowBits);
     if (ret != Z_OK) {
         ZFREE(strm, state);
@@ -234,17 +251,17 @@ int value;
 {
     struct inflate_state FAR *state;
 
-    if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+    if (inflateStateCheck(strm)) return Z_STREAM_ERROR;
     state = (struct inflate_state FAR *)strm->state;
     if (bits < 0) {
         state->hold = 0;
         state->bits = 0;
         return Z_OK;
     }
-    if (bits > 16 || state->bits + bits > 32) return Z_STREAM_ERROR;
+    if (bits > 16 || state->bits + (uInt)bits > 32) return Z_STREAM_ERROR;
     value &= (1L << bits) - 1;
-    state->hold += value << state->bits;
-    state->bits += bits;
+    state->hold += (unsigned)value << state->bits;
+    state->bits += (uInt)bits;
     return Z_OK;
 }
 
@@ -625,7 +642,7 @@ int flush;
     static const unsigned short order[19] = /* permutation of code lengths */
         {16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15};
 
-    if (strm == Z_NULL || strm->state == Z_NULL || strm->next_out == Z_NULL ||
+    if (inflateStateCheck(strm) || strm->next_out == Z_NULL ||
         (strm->next_in == Z_NULL && strm->avail_in != 0))
         return Z_STREAM_ERROR;
 
@@ -645,6 +662,8 @@ int flush;
             NEEDBITS(16);
 #ifdef GUNZIP
             if ((state->wrap & 2) && hold == 0x8b1f) {  /* gzip header */
+                if (state->wbits == 0)
+                    state->wbits = 15;
                 state->check = crc32(0L, Z_NULL, 0);
                 CRC2(state->check, hold);
                 INITBITS();
@@ -672,7 +691,7 @@ int flush;
             len = BITS(4) + 8;
             if (state->wbits == 0)
                 state->wbits = len;
-            else if (len > state->wbits) {
+            if (len > 15 || len > state->wbits) {
                 strm->msg = (char *)"invalid window size";
                 state->mode = BAD;
                 break;
@@ -699,14 +718,16 @@ int flush;
             }
             if (state->head != Z_NULL)
                 state->head->text = (int)((hold >> 8) & 1);
-            if (state->flags & 0x0200) CRC2(state->check, hold);
+            if ((state->flags & 0x0200) && (state->wrap & 4))
+                CRC2(state->check, hold);
             INITBITS();
             state->mode = TIME;
         case TIME:
             NEEDBITS(32);
             if (state->head != Z_NULL)
                 state->head->time = hold;
-            if (state->flags & 0x0200) CRC4(state->check, hold);
+            if ((state->flags & 0x0200) && (state->wrap & 4))
+                CRC4(state->check, hold);
             INITBITS();
             state->mode = OS;
         case OS:
@@ -715,7 +736,8 @@ int flush;
                 state->head->xflags = (int)(hold & 0xff);
                 state->head->os = (int)(hold >> 8);
             }
-            if (state->flags & 0x0200) CRC2(state->check, hold);
+            if ((state->flags & 0x0200) && (state->wrap & 4))
+                CRC2(state->check, hold);
             INITBITS();
             state->mode = EXLEN;
         case EXLEN:
@@ -724,7 +746,8 @@ int flush;
                 state->length = (unsigned)(hold);
                 if (state->head != Z_NULL)
                     state->head->extra_len = (unsigned)hold;
-                if (state->flags & 0x0200) CRC2(state->check, hold);
+                if ((state->flags & 0x0200) && (state->wrap & 4))
+                    CRC2(state->check, hold);
                 INITBITS();
             }
             else if (state->head != Z_NULL)
@@ -742,7 +765,7 @@ int flush;
                                 len + copy > state->head->extra_max ?
                                 state->head->extra_max - len : copy);
                     }
-                    if (state->flags & 0x0200)
+                    if ((state->flags & 0x0200) && (state->wrap & 4))
                         state->check = crc32(state->check, next, copy);
                     have -= copy;
                     next += copy;
@@ -761,9 +784,9 @@ int flush;
                     if (state->head != Z_NULL &&
                             state->head->name != Z_NULL &&
                             state->length < state->head->name_max)
-                        state->head->name[state->length++] = len;
+                        state->head->name[state->length++] = (Bytef)len;
                 } while (len && copy < have);
-                if (state->flags & 0x0200)
+                if ((state->flags & 0x0200) && (state->wrap & 4))
                     state->check = crc32(state->check, next, copy);
                 have -= copy;
                 next += copy;
@@ -782,9 +805,9 @@ int flush;
                     if (state->head != Z_NULL &&
                             state->head->comment != Z_NULL &&
                             state->length < state->head->comm_max)
-                        state->head->comment[state->length++] = len;
+                        state->head->comment[state->length++] = (Bytef)len;
                 } while (len && copy < have);
-                if (state->flags & 0x0200)
+                if ((state->flags & 0x0200) && (state->wrap & 4))
                     state->check = crc32(state->check, next, copy);
                 have -= copy;
                 next += copy;
@@ -796,7 +819,7 @@ int flush;
         case HCRC:
             if (state->flags & 0x0200) {
                 NEEDBITS(16);
-                if (hold != (state->check & 0xffff)) {
+                if ((state->wrap & 4) && hold != (state->check & 0xffff)) {
                     strm->msg = (char *)"header crc mismatch";
                     state->mode = BAD;
                     break;
@@ -1177,11 +1200,11 @@ int flush;
                 out -= left;
                 strm->total_out += out;
                 state->total += out;
-                if (out)
+                if ((state->wrap & 4) && out)
                     strm->adler = state->check =
                         UPDATE(state->check, put - out, out);
                 out = left;
-                if ((
+                if ((state->wrap & 4) && (
 #ifdef GUNZIP
                      state->flags ? hold :
 #endif
@@ -1240,10 +1263,10 @@ int flush;
     strm->total_in += in;
     strm->total_out += out;
     state->total += out;
-    if (state->wrap && out)
+    if ((state->wrap & 4) && out)
         strm->adler = state->check =
             UPDATE(state->check, strm->next_out - out, out);
-    strm->data_type = state->bits + (state->last ? 64 : 0) +
+    strm->data_type = (int)state->bits + (state->last ? 64 : 0) +
                       (state->mode == TYPE ? 128 : 0) +
                       (state->mode == LEN_ || state->mode == COPY_ ? 256 : 0);
     if (((in == 0 && out == 0) || flush == Z_FINISH) && ret == Z_OK)
@@ -1255,7 +1278,7 @@ int ZEXPORT inflateEnd(strm)
 z_streamp strm;
 {
     struct inflate_state FAR *state;
-    if (strm == Z_NULL || strm->state == Z_NULL || strm->zfree == (free_func)0)
+    if (inflateStateCheck(strm))
         return Z_STREAM_ERROR;
     state = (struct inflate_state FAR *)strm->state;
     if (state->window != Z_NULL) ZFREE(strm, state->window);
@@ -1273,7 +1296,7 @@ uInt *dictLength;
     struct inflate_state FAR *state;
 
     /* check state */
-    if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+    if (inflateStateCheck(strm)) return Z_STREAM_ERROR;
     state = (struct inflate_state FAR *)strm->state;
 
     /* copy dictionary */
@@ -1298,7 +1321,7 @@ uInt dictLength;
     int ret;
 
     /* check state */
-    if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+    if (inflateStateCheck(strm)) return Z_STREAM_ERROR;
     state = (struct inflate_state FAR *)strm->state;
     if (state->wrap != 0 && state->mode != DICT)
         return Z_STREAM_ERROR;
@@ -1330,7 +1353,7 @@ gz_headerp head;
     struct inflate_state FAR *state;
 
     /* check state */
-    if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+    if (inflateStateCheck(strm)) return Z_STREAM_ERROR;
     state = (struct inflate_state FAR *)strm->state;
     if ((state->wrap & 2) == 0) return Z_STREAM_ERROR;
 
@@ -1383,7 +1406,7 @@ z_streamp strm;
     struct inflate_state FAR *state;
 
     /* check parameters */
-    if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+    if (inflateStateCheck(strm)) return Z_STREAM_ERROR;
     state = (struct inflate_state FAR *)strm->state;
     if (strm->avail_in == 0 && state->bits < 8) return Z_BUF_ERROR;
 
@@ -1430,7 +1453,7 @@ z_streamp strm;
 {
     struct inflate_state FAR *state;
 
-    if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+    if (inflateStateCheck(strm)) return Z_STREAM_ERROR;
     state = (struct inflate_state FAR *)strm->state;
     return state->mode == STORED && state->bits == 0;
 }
@@ -1445,8 +1468,7 @@ z_streamp source;
     unsigned wsize;
 
     /* check input */
-    if (dest == Z_NULL || source == Z_NULL || source->state == Z_NULL ||
-        source->zalloc == (alloc_func)0 || source->zfree == (free_func)0)
+    if (inflateStateCheck(source) || dest == Z_NULL)
         return Z_STREAM_ERROR;
     state = (struct inflate_state FAR *)source->state;
 
@@ -1467,6 +1489,7 @@ z_streamp source;
     /* copy state */
     zmemcpy((voidpf)dest, (voidpf)source, sizeof(z_stream));
     zmemcpy((voidpf)copy, (voidpf)state, sizeof(struct inflate_state));
+    copy->strm = dest;
     if (state->lencode >= state->codes &&
         state->lencode <= state->codes + ENOUGH - 1) {
         copy->lencode = copy->codes + (state->lencode - state->codes);
@@ -1488,25 +1511,51 @@ int subvert;
 {
     struct inflate_state FAR *state;
 
-    if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+    if (inflateStateCheck(strm)) return Z_STREAM_ERROR;
     state = (struct inflate_state FAR *)strm->state;
-    state->sane = !subvert;
 #ifdef INFLATE_ALLOW_INVALID_DISTANCE_TOOFAR_ARRR
+    state->sane = !subvert;
     return Z_OK;
 #else
+    (void)subvert;
     state->sane = 1;
     return Z_DATA_ERROR;
 #endif
 }
 
+int ZEXPORT inflateValidate(strm, check)
+z_streamp strm;
+int check;
+{
+    struct inflate_state FAR *state;
+
+    if (inflateStateCheck(strm)) return Z_STREAM_ERROR;
+    state = (struct inflate_state FAR *)strm->state;
+    if (check)
+        state->wrap |= 4;
+    else
+        state->wrap &= ~4;
+    return Z_OK;
+}
+
 long ZEXPORT inflateMark(strm)
 z_streamp strm;
 {
     struct inflate_state FAR *state;
 
-    if (strm == Z_NULL || strm->state == Z_NULL) return -1L << 16;
+    if (inflateStateCheck(strm))
+        return -(1L << 16);
     state = (struct inflate_state FAR *)strm->state;
-    return ((long)(state->back) << 16) +
+    return (long)(((unsigned long)((long)state->back)) << 16) +
         (state->mode == COPY ? state->length :
             (state->mode == MATCH ? state->was - state->length : 0));
 }
+
+unsigned long ZEXPORT inflateCodesUsed(strm)
+z_streamp strm;
+{
+    struct inflate_state FAR *state;
+    if (inflateStateCheck(strm)) return (unsigned long)-1;
+    state = (struct inflate_state FAR *)strm->state;
+    return (unsigned long)(state->next - state->codes);
+}
diff --git a/deps/zlib/inflate.h b/deps/zlib/inflate.h
index 95f4986..a46cce6 100644
--- a/deps/zlib/inflate.h
+++ b/deps/zlib/inflate.h
@@ -1,5 +1,5 @@
 /* inflate.h -- internal inflate state definition
- * Copyright (C) 1995-2009 Mark Adler
+ * Copyright (C) 1995-2016 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
@@ -18,7 +18,7 @@
 
 /* Possible inflate modes between inflate() calls */
 typedef enum {
-    HEAD,       /* i: waiting for magic header */
+    HEAD = 16180,   /* i: waiting for magic header */
     FLAGS,      /* i: waiting for method and flags (gzip) */
     TIME,       /* i: waiting for modification time (gzip) */
     OS,         /* i: waiting for extra flags and operating system (gzip) */
@@ -77,11 +77,14 @@ typedef enum {
         CHECK -> LENGTH -> DONE
  */
 
-/* state maintained between inflate() calls.  Approximately 10K bytes. */
+/* State maintained between inflate() calls -- approximately 7K bytes, not
+   including the allocated sliding window, which is up to 32K bytes. */
 struct inflate_state {
+    z_streamp strm;             /* pointer back to this zlib stream */
     inflate_mode mode;          /* current inflate mode */
     int last;                   /* true if processing last block */
-    int wrap;                   /* bit 0 true for zlib, bit 1 true for gzip */
+    int wrap;                   /* bit 0 true for zlib, bit 1 true for gzip,
+                                   bit 2 true to validate check value */
     int havedict;               /* true if dictionary provided */
     int flags;                  /* gzip header method and flags (0 if zlib) */
     unsigned dmax;              /* zlib header max distance (INFLATE_STRICT) */
diff --git a/deps/zlib/inftrees.c b/deps/zlib/inftrees.c
index 44d89cf..2ea08fc 100644
--- a/deps/zlib/inftrees.c
+++ b/deps/zlib/inftrees.c
@@ -1,5 +1,5 @@
 /* inftrees.c -- generate Huffman trees for efficient decoding
- * Copyright (C) 1995-2013 Mark Adler
+ * Copyright (C) 1995-2017 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
@@ -9,7 +9,7 @@
 #define MAXBITS 15
 
 const char inflate_copyright[] =
-   " inflate 1.2.8 Copyright 1995-2013 Mark Adler ";
+   " inflate 1.2.11 Copyright 1995-2017 Mark Adler ";
 /*
   If you use the zlib library in a product, an acknowledgment is welcome
   in the documentation of your product. If for some reason you cannot
@@ -54,7 +54,7 @@ unsigned short FAR *work;
     code FAR *next;             /* next available space in table */
     const unsigned short FAR *base;     /* base value table to use */
     const unsigned short FAR *extra;    /* extra bits table to use */
-    int end;                    /* use base and extra for symbol > end */
+    unsigned match;             /* use base and extra for symbol >= match */
     unsigned short count[MAXBITS+1];    /* number of codes of each length */
     unsigned short offs[MAXBITS+1];     /* offsets in table for each length */
     static const unsigned short lbase[31] = { /* Length codes 257..285 base */
@@ -62,7 +62,7 @@ unsigned short FAR *work;
         35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258, 0, 0};
     static const unsigned short lext[31] = { /* Length codes 257..285 extra */
         16, 16, 16, 16, 16, 16, 16, 16, 17, 17, 17, 17, 18, 18, 18, 18,
-        19, 19, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 16, 72, 78};
+        19, 19, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 16, 77, 202};
     static const unsigned short dbase[32] = { /* Distance codes 0..29 base */
         1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193,
         257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145,
@@ -181,19 +181,17 @@ unsigned short FAR *work;
     switch (type) {
     case CODES:
         base = extra = work;    /* dummy value--not used */
-        end = 19;
+        match = 20;
         break;
     case LENS:
         base = lbase;
-        base -= 257;
         extra = lext;
-        extra -= 257;
-        end = 256;
+        match = 257;
         break;
-    default:            /* DISTS */
+    default:    /* DISTS */
         base = dbase;
         extra = dext;
-        end = -1;
+        match = 0;
     }
 
     /* initialize state for loop */
@@ -216,13 +214,13 @@ unsigned short FAR *work;
     for (;;) {
         /* create table entry */
         here.bits = (unsigned char)(len - drop);
-        if ((int)(work[sym]) < end) {
+        if (work[sym] + 1U < match) {
             here.op = (unsigned char)0;
             here.val = work[sym];
         }
-        else if ((int)(work[sym]) > end) {
-            here.op = (unsigned char)(extra[work[sym]]);
-            here.val = base[work[sym]];
+        else if (work[sym] >= match) {
+            here.op = (unsigned char)(extra[work[sym] - match]);
+            here.val = base[work[sym] - match];
         }
         else {
             here.op = (unsigned char)(32 + 64);         /* end of block */
diff --git a/deps/zlib/trees.c b/deps/zlib/trees.c
index bb866f0..50cf4b4 100644
--- a/deps/zlib/trees.c
+++ b/deps/zlib/trees.c
@@ -1,5 +1,5 @@
 /* trees.c -- output deflated data using Huffman coding
- * Copyright (C) 1995-2012 Jean-loup Gailly
+ * Copyright (C) 1995-2017 Jean-loup Gailly
  * detect_data_type() function provided freely by Cosmin Truta, 2006
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
@@ -36,7 +36,7 @@
 
 #include "deflate.h"
 
-#ifdef DEBUG
+#ifdef ZLIB_DEBUG
 #  include <ctype.h>
 #endif
 
@@ -122,13 +122,13 @@ struct static_tree_desc_s {
     int     max_length;          /* max bit length for the codes */
 };
 
-local static_tree_desc  static_l_desc =
+local const static_tree_desc  static_l_desc =
 {static_ltree, extra_lbits, LITERALS+1, L_CODES, MAX_BITS};
 
-local static_tree_desc  static_d_desc =
+local const static_tree_desc  static_d_desc =
 {static_dtree, extra_dbits, 0,          D_CODES, MAX_BITS};
 
-local static_tree_desc  static_bl_desc =
+local const static_tree_desc  static_bl_desc =
 {(const ct_data *)0, extra_blbits, 0,   BL_CODES, MAX_BL_BITS};
 
 /* ===========================================================================
@@ -152,18 +152,16 @@ local int  detect_data_type OF((deflate_state *s));
 local unsigned bi_reverse OF((unsigned value, int length));
 local void bi_windup      OF((deflate_state *s));
 local void bi_flush       OF((deflate_state *s));
-local void copy_block     OF((deflate_state *s, charf *buf, unsigned len,
-                              int header));
 
 #ifdef GEN_TREES_H
 local void gen_trees_header OF((void));
 #endif
 
-#ifndef DEBUG
+#ifndef ZLIB_DEBUG
 #  define send_code(s, c, tree) send_bits(s, tree[c].Code, tree[c].Len)
    /* Send a code of the given tree. c and tree must not have side effects */
 
-#else /* DEBUG */
+#else /* !ZLIB_DEBUG */
 #  define send_code(s, c, tree) \
      { if (z_verbose>2) fprintf(stderr,"\ncd %3d ",(c)); \
        send_bits(s, tree[c].Code, tree[c].Len); }
@@ -182,7 +180,7 @@ local void gen_trees_header OF((void));
  * Send a value on a given number of bits.
  * IN assertion: length <= 16 and value fits in length bits.
  */
-#ifdef DEBUG
+#ifdef ZLIB_DEBUG
 local void send_bits      OF((deflate_state *s, int value, int length));
 
 local void send_bits(s, value, length)
@@ -208,12 +206,12 @@ local void send_bits(s, value, length)
         s->bi_valid += length;
     }
 }
-#else /* !DEBUG */
+#else /* !ZLIB_DEBUG */
 
 #define send_bits(s, value, length) \
 { int len = length;\
   if (s->bi_valid > (int)Buf_size - len) {\
-    int val = value;\
+    int val = (int)value;\
     s->bi_buf |= (ush)val << s->bi_valid;\
     put_short(s, s->bi_buf);\
     s->bi_buf = (ush)val >> (Buf_size - s->bi_valid);\
@@ -223,7 +221,7 @@ local void send_bits(s, value, length)
     s->bi_valid += len;\
   }\
 }
-#endif /* DEBUG */
+#endif /* ZLIB_DEBUG */
 
 
 /* the arguments must not have side effects */
@@ -317,7 +315,7 @@ local void tr_static_init()
  * Genererate the file trees.h describing the static trees.
  */
 #ifdef GEN_TREES_H
-#  ifndef DEBUG
+#  ifndef ZLIB_DEBUG
 #    include <stdio.h>
 #  endif
 
@@ -394,7 +392,7 @@ void ZLIB_INTERNAL _tr_init(s)
 
     s->bi_buf = 0;
     s->bi_valid = 0;
-#ifdef DEBUG
+#ifdef ZLIB_DEBUG
     s->compressed_len = 0L;
     s->bits_sent = 0L;
 #endif
@@ -522,12 +520,12 @@ local void gen_bitlen(s, desc)
         xbits = 0;
         if (n >= base) xbits = extra[n-base];
         f = tree[n].Freq;
-        s->opt_len += (ulg)f * (bits + xbits);
-        if (stree) s->static_len += (ulg)f * (stree[n].Len + xbits);
+        s->opt_len += (ulg)f * (unsigned)(bits + xbits);
+        if (stree) s->static_len += (ulg)f * (unsigned)(stree[n].Len + xbits);
     }
     if (overflow == 0) return;
 
-    Trace((stderr,"\nbit length overflow\n"));
+    Tracev((stderr,"\nbit length overflow\n"));
     /* This happens for example on obj2 and pic of the Calgary corpus */
 
     /* Find the first bit length which could increase: */
@@ -554,9 +552,8 @@ local void gen_bitlen(s, desc)
             m = s->heap[--h];
             if (m > max_code) continue;
             if ((unsigned) tree[m].Len != (unsigned) bits) {
-                Trace((stderr,"code %d bits %d->%d\n", m, tree[m].Len, bits));
-                s->opt_len += ((long)bits - (long)tree[m].Len)
-                              *(long)tree[m].Freq;
+                Tracev((stderr,"code %d bits %d->%d\n", m, tree[m].Len, bits));
+                s->opt_len += ((ulg)bits - tree[m].Len) * tree[m].Freq;
                 tree[m].Len = (ush)bits;
             }
             n--;
@@ -578,7 +575,7 @@ local void gen_codes (tree, max_code, bl_count)
     ushf *bl_count;            /* number of codes at each bit length */
 {
     ush next_code[MAX_BITS+1]; /* next code value for each bit length */
-    ush code = 0;              /* running code value */
+    unsigned code = 0;         /* running code value */
     int bits;                  /* bit index */
     int n;                     /* code index */
 
@@ -586,7 +583,8 @@ local void gen_codes (tree, max_code, bl_count)
      * without bit reversal.
      */
     for (bits = 1; bits <= MAX_BITS; bits++) {
-        next_code[bits] = code = (code + bl_count[bits-1]) << 1;
+        code = (code + bl_count[bits-1]) << 1;
+        next_code[bits] = (ush)code;
     }
     /* Check that the bit counts in bl_count are consistent. The last code
      * must be all ones.
@@ -723,7 +721,7 @@ local void scan_tree (s, tree, max_code)
         if (++count < max_count && curlen == nextlen) {
             continue;
         } else if (count < min_count) {
-            s->bl_tree[curlen].Freq += (ush)count;
+            s->bl_tree[curlen].Freq += count;
         } else if (curlen != 0) {
             if (curlen != prevlen) s->bl_tree[curlen].Freq++;
             s->bl_tree[REP_3_6].Freq++;
@@ -821,7 +819,7 @@ local int build_bl_tree(s)
         if (s->bl_tree[bl_order[max_blindex]].Len != 0) break;
     }
     /* Update opt_len to include the bit length tree and counts */
-    s->opt_len += 3*(max_blindex+1) + 5+5+4;
+    s->opt_len += 3*((ulg)max_blindex+1) + 5+5+4;
     Tracev((stderr, "\ndyn trees: dyn %ld, stat %ld",
             s->opt_len, s->static_len));
 
@@ -869,11 +867,17 @@ void ZLIB_INTERNAL _tr_stored_block(s, buf, stored_len, last)
     int last;         /* one if this is the last block for a file */
 {
     send_bits(s, (STORED_BLOCK<<1)+last, 3);    /* send block type */
-#ifdef DEBUG
+    bi_windup(s);        /* align on byte boundary */
+    put_short(s, (ush)stored_len);
+    put_short(s, (ush)~stored_len);
+    zmemcpy(s->pending_buf + s->pending, (Bytef *)buf, stored_len);
+    s->pending += stored_len;
+#ifdef ZLIB_DEBUG
     s->compressed_len = (s->compressed_len + 3 + 7) & (ulg)~7L;
     s->compressed_len += (stored_len + 4) << 3;
+    s->bits_sent += 2*16;
+    s->bits_sent += stored_len<<3;
 #endif
-    copy_block(s, buf, (unsigned)stored_len, 1); /* with header */
 }
 
 /* ===========================================================================
@@ -894,7 +898,7 @@ void ZLIB_INTERNAL _tr_align(s)
 {
     send_bits(s, STATIC_TREES<<1, 3);
     send_code(s, END_BLOCK, static_ltree);
-#ifdef DEBUG
+#ifdef ZLIB_DEBUG
     s->compressed_len += 10L; /* 3 for block type, 7 for EOB */
 #endif
     bi_flush(s);
@@ -902,7 +906,7 @@ void ZLIB_INTERNAL _tr_align(s)
 
 /* ===========================================================================
  * Determine the best encoding for the current block: dynamic trees, static
- * trees or store, and output the encoded block to the zip file.
+ * trees or store, and write out the encoded block.
  */
 void ZLIB_INTERNAL _tr_flush_block(s, buf, stored_len, last)
     deflate_state *s;
@@ -974,7 +978,7 @@ void ZLIB_INTERNAL _tr_flush_block(s, buf, stored_len, last)
         send_bits(s, (STATIC_TREES<<1)+last, 3);
         compress_block(s, (const ct_data *)static_ltree,
                        (const ct_data *)static_dtree);
-#ifdef DEBUG
+#ifdef ZLIB_DEBUG
         s->compressed_len += 3 + s->static_len;
 #endif
     } else {
@@ -983,7 +987,7 @@ void ZLIB_INTERNAL _tr_flush_block(s, buf, stored_len, last)
                        max_blindex+1);
         compress_block(s, (const ct_data *)s->dyn_ltree,
                        (const ct_data *)s->dyn_dtree);
-#ifdef DEBUG
+#ifdef ZLIB_DEBUG
         s->compressed_len += 3 + s->opt_len;
 #endif
     }
@@ -995,7 +999,7 @@ void ZLIB_INTERNAL _tr_flush_block(s, buf, stored_len, last)
 
     if (last) {
         bi_windup(s);
-#ifdef DEBUG
+#ifdef ZLIB_DEBUG
         s->compressed_len += 7;  /* align on byte boundary */
 #endif
     }
@@ -1090,7 +1094,7 @@ local void compress_block(s, ltree, dtree)
             send_code(s, code, dtree);       /* send the distance code */
             extra = extra_dbits[code];
             if (extra != 0) {
-                dist -= base_dist[code];
+                dist -= (unsigned)base_dist[code];
                 send_bits(s, dist, extra);   /* send the extra distance bits */
             }
         } /* literal or match pair ? */
@@ -1193,34 +1197,7 @@ local void bi_windup(s)
     }
     s->bi_buf = 0;
     s->bi_valid = 0;
-#ifdef DEBUG
+#ifdef ZLIB_DEBUG
     s->bits_sent = (s->bits_sent+7) & ~7;
 #endif
 }
-
-/* ===========================================================================
- * Copy a stored block, storing first the length and its
- * one's complement if requested.
- */
-local void copy_block(s, buf, len, header)
-    deflate_state *s;
-    charf    *buf;    /* the input data */
-    unsigned len;     /* its length */
-    int      header;  /* true if block header must be written */
-{
-    bi_windup(s);        /* align on byte boundary */
-
-    if (header) {
-        put_short(s, (ush)len);
-        put_short(s, (ush)~len);
-#ifdef DEBUG
-        s->bits_sent += 2*16;
-#endif
-    }
-#ifdef DEBUG
-    s->bits_sent += (ulg)len<<3;
-#endif
-    while (len--) {
-        put_byte(s, *buf++);
-    }
-}
diff --git a/deps/zlib/zconf.h b/deps/zlib/zconf.h
index 229c400..5e1d68a 100644
--- a/deps/zlib/zconf.h
+++ b/deps/zlib/zconf.h
@@ -1,5 +1,5 @@
 /* zconf.h -- configuration of the zlib compression library
- * Copyright (C) 1995-2010 Jean-loup Gailly.
+ * Copyright (C) 1995-2016 Jean-loup Gailly, Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
@@ -8,51 +8,527 @@
 #ifndef ZCONF_H
 #define ZCONF_H
 
-#include "../../src/common.h"
+/*
+ * If you *really* need a unique prefix for all types and library functions,
+ * compile with -DZ_PREFIX. The "standard" zlib should be compiled without it.
+ * Even better than compiling with -DZ_PREFIX would be to use configure to set
+ * this permanently in zconf.h using "./configure --zprefix".
+ */
+#ifdef Z_PREFIX     /* may be set to #if 1 by ./configure */
+#  define Z_PREFIX_SET
+
+/* all linked symbols and init macros */
+#  define _dist_code            z__dist_code
+#  define _length_code          z__length_code
+#  define _tr_align             z__tr_align
+#  define _tr_flush_bits        z__tr_flush_bits
+#  define _tr_flush_block       z__tr_flush_block
+#  define _tr_init              z__tr_init
+#  define _tr_stored_block      z__tr_stored_block
+#  define _tr_tally             z__tr_tally
+#  define adler32               z_adler32
+#  define adler32_combine       z_adler32_combine
+#  define adler32_combine64     z_adler32_combine64
+#  define adler32_z             z_adler32_z
+#  ifndef Z_SOLO
+#    define compress              z_compress
+#    define compress2             z_compress2
+#    define compressBound         z_compressBound
+#  endif
+#  define crc32                 z_crc32
+#  define crc32_combine         z_crc32_combine
+#  define crc32_combine64       z_crc32_combine64
+#  define crc32_z               z_crc32_z
+#  define deflate               z_deflate
+#  define deflateBound          z_deflateBound
+#  define deflateCopy           z_deflateCopy
+#  define deflateEnd            z_deflateEnd
+#  define deflateGetDictionary  z_deflateGetDictionary
+#  define deflateInit           z_deflateInit
+#  define deflateInit2          z_deflateInit2
+#  define deflateInit2_         z_deflateInit2_
+#  define deflateInit_          z_deflateInit_
+#  define deflateParams         z_deflateParams
+#  define deflatePending        z_deflatePending
+#  define deflatePrime          z_deflatePrime
+#  define deflateReset          z_deflateReset
+#  define deflateResetKeep      z_deflateResetKeep
+#  define deflateSetDictionary  z_deflateSetDictionary
+#  define deflateSetHeader      z_deflateSetHeader
+#  define deflateTune           z_deflateTune
+#  define deflate_copyright     z_deflate_copyright
+#  define get_crc_table         z_get_crc_table
+#  ifndef Z_SOLO
+#    define gz_error              z_gz_error
+#    define gz_intmax             z_gz_intmax
+#    define gz_strwinerror        z_gz_strwinerror
+#    define gzbuffer              z_gzbuffer
+#    define gzclearerr            z_gzclearerr
+#    define gzclose               z_gzclose
+#    define gzclose_r             z_gzclose_r
+#    define gzclose_w             z_gzclose_w
+#    define gzdirect              z_gzdirect
+#    define gzdopen               z_gzdopen
+#    define gzeof                 z_gzeof
+#    define gzerror               z_gzerror
+#    define gzflush               z_gzflush
+#    define gzfread               z_gzfread
+#    define gzfwrite              z_gzfwrite
+#    define gzgetc                z_gzgetc
+#    define gzgetc_               z_gzgetc_
+#    define gzgets                z_gzgets
+#    define gzoffset              z_gzoffset
+#    define gzoffset64            z_gzoffset64
+#    define gzopen                z_gzopen
+#    define gzopen64              z_gzopen64
+#    ifdef _WIN32
+#      define gzopen_w              z_gzopen_w
+#    endif
+#    define gzprintf              z_gzprintf
+#    define gzputc                z_gzputc
+#    define gzputs                z_gzputs
+#    define gzread                z_gzread
+#    define gzrewind              z_gzrewind
+#    define gzseek                z_gzseek
+#    define gzseek64              z_gzseek64
+#    define gzsetparams           z_gzsetparams
+#    define gztell                z_gztell
+#    define gztell64              z_gztell64
+#    define gzungetc              z_gzungetc
+#    define gzvprintf             z_gzvprintf
+#    define gzwrite               z_gzwrite
+#  endif
+#  define inflate               z_inflate
+#  define inflateBack           z_inflateBack
+#  define inflateBackEnd        z_inflateBackEnd
+#  define inflateBackInit       z_inflateBackInit
+#  define inflateBackInit_      z_inflateBackInit_
+#  define inflateCodesUsed      z_inflateCodesUsed
+#  define inflateCopy           z_inflateCopy
+#  define inflateEnd            z_inflateEnd
+#  define inflateGetDictionary  z_inflateGetDictionary
+#  define inflateGetHeader      z_inflateGetHeader
+#  define inflateInit           z_inflateInit
+#  define inflateInit2          z_inflateInit2
+#  define inflateInit2_         z_inflateInit2_
+#  define inflateInit_          z_inflateInit_
+#  define inflateMark           z_inflateMark
+#  define inflatePrime          z_inflatePrime
+#  define inflateReset          z_inflateReset
+#  define inflateReset2         z_inflateReset2
+#  define inflateResetKeep      z_inflateResetKeep
+#  define inflateSetDictionary  z_inflateSetDictionary
+#  define inflateSync           z_inflateSync
+#  define inflateSyncPoint      z_inflateSyncPoint
+#  define inflateUndermine      z_inflateUndermine
+#  define inflateValidate       z_inflateValidate
+#  define inflate_copyright     z_inflate_copyright
+#  define inflate_fast          z_inflate_fast
+#  define inflate_table         z_inflate_table
+#  ifndef Z_SOLO
+#    define uncompress            z_uncompress
+#    define uncompress2           z_uncompress2
+#  endif
+#  define zError                z_zError
+#  ifndef Z_SOLO
+#    define zcalloc               z_zcalloc
+#    define zcfree                z_zcfree
+#  endif
+#  define zlibCompileFlags      z_zlibCompileFlags
+#  define zlibVersion           z_zlibVersion
+
+/* all zlib typedefs in zlib.h and zconf.h */
+#  define Byte                  z_Byte
+#  define Bytef                 z_Bytef
+#  define alloc_func            z_alloc_func
+#  define charf                 z_charf
+#  define free_func             z_free_func
+#  ifndef Z_SOLO
+#    define gzFile                z_gzFile
+#  endif
+#  define gz_header             z_gz_header
+#  define gz_headerp            z_gz_headerp
+#  define in_func               z_in_func
+#  define intf                  z_intf
+#  define out_func              z_out_func
+#  define uInt                  z_uInt
+#  define uIntf                 z_uIntf
+#  define uLong                 z_uLong
+#  define uLongf                z_uLongf
+#  define voidp                 z_voidp
+#  define voidpc                z_voidpc
+#  define voidpf                z_voidpf
+
+/* all zlib structs in zlib.h and zconf.h */
+#  define gz_header_s           z_gz_header_s
+#  define internal_state        z_internal_state
+
+#endif
+
+#if defined(__MSDOS__) && !defined(MSDOS)
+#  define MSDOS
+#endif
+#if (defined(OS_2) || defined(__OS2__)) && !defined(OS2)
+#  define OS2
+#endif
+#if defined(_WINDOWS) && !defined(WINDOWS)
+#  define WINDOWS
+#endif
+#if defined(_WIN32) || defined(_WIN32_WCE) || defined(__WIN32__)
+#  ifndef WIN32
+#    define WIN32
+#  endif
+#endif
+#if (defined(MSDOS) || defined(OS2) || defined(WINDOWS)) && !defined(WIN32)
+#  if !defined(__GNUC__) && !defined(__FLAT__) && !defined(__386__)
+#    ifndef SYS16BIT
+#      define SYS16BIT
+#    endif
+#  endif
+#endif
+
+/*
+ * Compile with -DMAXSEG_64K if the alloc function cannot allocate more
+ * than 64k bytes at a time (needed on systems with 16-bit int).
+ */
+#ifdef SYS16BIT
+#  define MAXSEG_64K
+#endif
+#ifdef MSDOS
+#  define UNALIGNED_OK
+#endif
+
+#ifdef __STDC_VERSION__
+#  ifndef STDC
+#    define STDC
+#  endif
+#  if __STDC_VERSION__ >= 199901L
+#    ifndef STDC99
+#      define STDC99
+#    endif
+#  endif
+#endif
+#if !defined(STDC) && (defined(__STDC__) || defined(__cplusplus))
+#  define STDC
+#endif
+#if !defined(STDC) && (defined(__GNUC__) || defined(__BORLANDC__))
+#  define STDC
+#endif
+#if !defined(STDC) && (defined(MSDOS) || defined(WINDOWS) || defined(WIN32))
+#  define STDC
+#endif
+#if !defined(STDC) && (defined(OS2) || defined(__HOS_AIX__))
+#  define STDC
+#endif
+
+#if defined(__OS400__) && !defined(STDC)    /* iSeries (formerly AS/400). */
+#  define STDC
+#endif
 
-/* Jeez, don't complain about non-prototype
- * forms, we didn't write zlib */
-#if defined(_MSC_VER)
-#	pragma warning( disable : 4131 )
-#	pragma warning( disable : 4142 ) /* benign redefinition of type */
+#ifndef STDC
+#  ifndef const /* cannot use !defined(STDC) && !defined(const) on Mac */
+#    define const       /* note: need a more gentle solution here */
+#  endif
+#endif
+
+#if defined(ZLIB_CONST) && !defined(z_const)
+#  define z_const const
+#else
+#  define z_const
+#endif
+
+#ifdef Z_SOLO
+   typedef unsigned long z_size_t;
+#else
+#  define z_longlong long long
+#  if defined(NO_SIZE_T)
+     typedef unsigned NO_SIZE_T z_size_t;
+#  elif defined(STDC)
+#    include <stddef.h>
+     typedef size_t z_size_t;
+#  else
+     typedef unsigned long z_size_t;
+#  endif
+#  undef z_longlong
 #endif
 
 /* Maximum value for memLevel in deflateInit2 */
-#define MAX_MEM_LEVEL 9
+#ifndef MAX_MEM_LEVEL
+#  ifdef MAXSEG_64K
+#    define MAX_MEM_LEVEL 8
+#  else
+#    define MAX_MEM_LEVEL 9
+#  endif
+#endif
 
 /* Maximum value for windowBits in deflateInit2 and inflateInit2.
  * WARNING: reducing MAX_WBITS makes minigzip unable to extract .gz files
  * created by gzip. (Files created by minigzip can still be extracted by
  * gzip.)
  */
-#define MAX_WBITS   15 /* 32K LZ77 window */
+#ifndef MAX_WBITS
+#  define MAX_WBITS   15 /* 32K LZ77 window */
+#endif
+
+/* The memory requirements for deflate are (in bytes):
+            (1 << (windowBits+2)) +  (1 << (memLevel+9))
+ that is: 128K for windowBits=15  +  128K for memLevel = 8  (default values)
+ plus a few kilobytes for small objects. For example, if you want to reduce
+ the default memory requirements from 256K to 128K, compile with
+     make CFLAGS="-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7"
+ Of course this will generally degrade compression (there's no free lunch).
+
+   The memory requirements for inflate are (in bytes) 1 << windowBits
+ that is, 32K for windowBits=15 (default value) plus about 7 kilobytes
+ for small objects.
+*/
+
+                        /* Type declarations */
+
+#ifndef OF /* function prototypes */
+#  ifdef STDC
+#    define OF(args)  args
+#  else
+#    define OF(args)  ()
+#  endif
+#endif
+
+#ifndef Z_ARG /* function prototypes for stdarg */
+#  if defined(STDC) || defined(Z_HAVE_STDARG_H)
+#    define Z_ARG(args)  args
+#  else
+#    define Z_ARG(args)  ()
+#  endif
+#endif
+
+/* The following definitions for FAR are needed only for MSDOS mixed
+ * model programming (small or medium model with some far allocations).
+ * This was tested only with MSC; for other MSDOS compilers you may have
+ * to define NO_MEMCPY in zutil.h.  If you don't need the mixed model,
+ * just define FAR to be empty.
+ */
+#ifdef SYS16BIT
+#  if defined(M_I86SM) || defined(M_I86MM)
+     /* MSC small or medium model */
+#    define SMALL_MEDIUM
+#    ifdef _MSC_VER
+#      define FAR _far
+#    else
+#      define FAR far
+#    endif
+#  endif
+#  if (defined(__SMALL__) || defined(__MEDIUM__))
+     /* Turbo C small or medium model */
+#    define SMALL_MEDIUM
+#    ifdef __BORLANDC__
+#      define FAR _far
+#    else
+#      define FAR far
+#    endif
+#  endif
+#endif
+
+#if defined(WINDOWS) || defined(WIN32)
+   /* If building or using zlib as a DLL, define ZLIB_DLL.
+    * This is not mandatory, but it offers a little performance increase.
+    */
+#  ifdef ZLIB_DLL
+#    if defined(WIN32) && (!defined(__BORLANDC__) || (__BORLANDC__ >= 0x500))
+#      ifdef ZLIB_INTERNAL
+#        define ZEXTERN extern __declspec(dllexport)
+#      else
+#        define ZEXTERN extern __declspec(dllimport)
+#      endif
+#    endif
+#  endif  /* ZLIB_DLL */
+   /* If building or using zlib with the WINAPI/WINAPIV calling convention,
+    * define ZLIB_WINAPI.
+    * Caution: the standard ZLIB1.DLL is NOT compiled using ZLIB_WINAPI.
+    */
+#  ifdef ZLIB_WINAPI
+#    ifdef FAR
+#      undef FAR
+#    endif
+#    include <windows.h>
+     /* No need for _export, use ZLIB.DEF instead. */
+     /* For complete Windows compatibility, use WINAPI, not __stdcall. */
+#    define ZEXPORT WINAPI
+#    ifdef WIN32
+#      define ZEXPORTVA WINAPIV
+#    else
+#      define ZEXPORTVA FAR CDECL
+#    endif
+#  endif
+#endif
+
+#if defined (__BEOS__)
+#  ifdef ZLIB_DLL
+#    ifdef ZLIB_INTERNAL
+#      define ZEXPORT   __declspec(dllexport)
+#      define ZEXPORTVA __declspec(dllexport)
+#    else
+#      define ZEXPORT   __declspec(dllimport)
+#      define ZEXPORTVA __declspec(dllimport)
+#    endif
+#  endif
+#endif
+
+#ifndef ZEXTERN
+#  define ZEXTERN extern
+#endif
+#ifndef ZEXPORT
+#  define ZEXPORT
+#endif
+#ifndef ZEXPORTVA
+#  define ZEXPORTVA
+#endif
 
-#define ZEXTERN extern
-#define ZEXPORT
-#define ZEXPORTVA
 #ifndef FAR
-#	define FAR
+#  define FAR
 #endif
-#define OF(args)  args
-#define Z_ARG(args) args
 
+#if !defined(__MACTYPES__)
 typedef unsigned char  Byte;  /* 8 bits */
+#endif
 typedef unsigned int   uInt;  /* 16 bits or more */
 typedef unsigned long  uLong; /* 32 bits or more */
-typedef unsigned long z_crc_t;
 
-typedef Byte  FAR Bytef;
+#ifdef SMALL_MEDIUM
+   /* Borland C/C++ and some old MSC versions ignore FAR inside typedef */
+#  define Bytef Byte FAR
+#else
+   typedef Byte  FAR Bytef;
+#endif
 typedef char  FAR charf;
 typedef int   FAR intf;
 typedef uInt  FAR uIntf;
 typedef uLong FAR uLongf;
 
-typedef void const *voidpc;
-typedef void FAR   *voidpf;
-typedef void       *voidp;
+#ifdef STDC
+   typedef void const *voidpc;
+   typedef void FAR   *voidpf;
+   typedef void       *voidp;
+#else
+   typedef Byte const *voidpc;
+   typedef Byte FAR   *voidpf;
+   typedef Byte       *voidp;
+#endif
+
+#if !defined(Z_U4) && !defined(Z_SOLO) && defined(STDC)
+#  include <limits.h>
+#  if (UINT_MAX == 0xffffffffUL)
+#    define Z_U4 unsigned
+#  elif (ULONG_MAX == 0xffffffffUL)
+#    define Z_U4 unsigned long
+#  elif (USHRT_MAX == 0xffffffffUL)
+#    define Z_U4 unsigned short
+#  endif
+#endif
+
+#ifdef Z_U4
+   typedef Z_U4 z_crc_t;
+#else
+   typedef unsigned long z_crc_t;
+#endif
+
+#ifdef HAVE_UNISTD_H    /* may be set to #if 1 by ./configure */
+#  define Z_HAVE_UNISTD_H
+#endif
+
+#ifdef HAVE_STDARG_H    /* may be set to #if 1 by ./configure */
+#  define Z_HAVE_STDARG_H
+#endif
+
+#ifdef STDC
+#  ifndef Z_SOLO
+#    include <sys/types.h>      /* for off_t */
+#  endif
+#endif
+
+#if defined(STDC) || defined(Z_HAVE_STDARG_H)
+#  ifndef Z_SOLO
+#    include <stdarg.h>         /* for va_list */
+#  endif
+#endif
+
+#ifdef _WIN32
+#  ifndef Z_SOLO
+#    include <stddef.h>         /* for wchar_t */
+#  endif
+#endif
+
+/* a little trick to accommodate both "#define _LARGEFILE64_SOURCE" and
+ * "#define _LARGEFILE64_SOURCE 1" as requesting 64-bit operations, (even
+ * though the former does not conform to the LFS document), but considering
+ * both "#undef _LARGEFILE64_SOURCE" and "#define _LARGEFILE64_SOURCE 0" as
+ * equivalently requesting no 64-bit operations
+ */
+#if defined(_LARGEFILE64_SOURCE) && -_LARGEFILE64_SOURCE - -1 == 1
+#  undef _LARGEFILE64_SOURCE
+#endif
 
-#define z_off_t git_off_t
-#define z_off64_t z_off_t
-#define z_const const
+#if defined(__WATCOMC__) && !defined(Z_HAVE_UNISTD_H)
+#  define Z_HAVE_UNISTD_H
+#endif
+#ifndef Z_SOLO
+#  if defined(Z_HAVE_UNISTD_H) || defined(_LARGEFILE64_SOURCE)
+#    include <unistd.h>         /* for SEEK_*, off_t, and _LFS64_LARGEFILE */
+#    ifdef VMS
+#      include <unixio.h>       /* for off_t */
+#    endif
+#    ifndef z_off_t
+#      define z_off_t off_t
+#    endif
+#  endif
+#endif
+
+#if defined(_LFS64_LARGEFILE) && _LFS64_LARGEFILE-0
+#  define Z_LFS64
+#endif
+
+#if defined(_LARGEFILE64_SOURCE) && defined(Z_LFS64)
+#  define Z_LARGE64
+#endif
+
+#if defined(_FILE_OFFSET_BITS) && _FILE_OFFSET_BITS-0 == 64 && defined(Z_LFS64)
+#  define Z_WANT64
+#endif
+
+#if !defined(SEEK_SET) && !defined(Z_SOLO)
+#  define SEEK_SET        0       /* Seek from beginning of file.  */
+#  define SEEK_CUR        1       /* Seek from current position.  */
+#  define SEEK_END        2       /* Set file pointer to EOF plus "offset" */
+#endif
+
+#ifndef z_off_t
+#  define z_off_t long
+#endif
+
+#if !defined(_WIN32) && defined(Z_LARGE64)
+#  define z_off64_t off64_t
+#else
+#  if defined(_WIN32) && !defined(__GNUC__) && !defined(Z_SOLO)
+#    define z_off64_t __int64
+#  else
+#    define z_off64_t z_off_t
+#  endif
+#endif
+
+/* MVS linker does not support external names larger than 8 bytes */
+#if defined(__MVS__)
+  #pragma map(deflateInit_,"DEIN")
+  #pragma map(deflateInit2_,"DEIN2")
+  #pragma map(deflateEnd,"DEEND")
+  #pragma map(deflateBound,"DEBND")
+  #pragma map(inflateInit_,"ININ")
+  #pragma map(inflateInit2_,"ININ2")
+  #pragma map(inflateEnd,"INEND")
+  #pragma map(inflateSync,"INSY")
+  #pragma map(inflateSetDictionary,"INSEDI")
+  #pragma map(compressBound,"CMBND")
+  #pragma map(inflate_table,"INTABL")
+  #pragma map(inflate_fast,"INFA")
+  #pragma map(inflate_copyright,"INCOPY")
+#endif
 
 #endif /* ZCONF_H */
diff --git a/deps/zlib/zlib.h b/deps/zlib/zlib.h
index 3e0c767..f09cdaf 100644
--- a/deps/zlib/zlib.h
+++ b/deps/zlib/zlib.h
@@ -1,7 +1,7 @@
 /* zlib.h -- interface of the 'zlib' general purpose compression library
-  version 1.2.8, April 28th, 2013
+  version 1.2.11, January 15th, 2017
 
-  Copyright (C) 1995-2013 Jean-loup Gailly and Mark Adler
+  Copyright (C) 1995-2017 Jean-loup Gailly and Mark Adler
 
   This software is provided 'as-is', without any express or implied
   warranty.  In no event will the authors be held liable for any damages
@@ -37,11 +37,11 @@
 extern "C" {
 #endif
 
-#define ZLIB_VERSION "1.2.8"
-#define ZLIB_VERNUM 0x1280
+#define ZLIB_VERSION "1.2.11"
+#define ZLIB_VERNUM 0x12b0
 #define ZLIB_VER_MAJOR 1
 #define ZLIB_VER_MINOR 2
-#define ZLIB_VER_REVISION 8
+#define ZLIB_VER_REVISION 11
 #define ZLIB_VER_SUBREVISION 0
 
 /*
@@ -65,7 +65,8 @@ extern "C" {
   with "gz".  The gzip format is different from the zlib format.  gzip is a
   gzip wrapper, documented in RFC 1952, wrapped around a deflate stream.
 
-    This library can optionally read and write gzip streams in memory as well.
+    This library can optionally read and write gzip and raw deflate streams in
+  memory as well.
 
     The zlib format was designed to be compact and fast for use in memory
   and on communications channels.  The gzip format was designed for single-
@@ -74,7 +75,7 @@ extern "C" {
 
     The library does not install any signal handler.  The decoder checks
   the consistency of the compressed data, so the library should never crash
-  even in case of corrupted input.
+  even in the case of corrupted input.
 */
 
 typedef voidpf (*alloc_func) OF((voidpf opaque, uInt items, uInt size));
@@ -87,7 +88,7 @@ typedef struct z_stream_s {
     uInt     avail_in;  /* number of bytes available at next_in */
     uLong    total_in;  /* total number of input bytes read so far */
 
-    Bytef    *next_out; /* next output byte should be put there */
+    Bytef    *next_out; /* next output byte will go here */
     uInt     avail_out; /* remaining free space at next_out */
     uLong    total_out; /* total number of bytes output so far */
 
@@ -98,8 +99,9 @@ typedef struct z_stream_s {
     free_func  zfree;   /* used to free the internal state */
     voidpf     opaque;  /* private data object passed to zalloc and zfree */
 
-    int     data_type;  /* best guess about the data type: binary or text */
-    uLong   adler;      /* adler32 value of the uncompressed data */
+    int     data_type;  /* best guess about the data type: binary or text
+                           for deflate, or the decoding state for inflate */
+    uLong   adler;      /* Adler-32 or CRC-32 value of the uncompressed data */
     uLong   reserved;   /* reserved for future use */
 } z_stream;
 
@@ -142,7 +144,9 @@ typedef gz_header FAR *gz_headerp;
 
      zalloc must return Z_NULL if there is not enough memory for the object.
    If zlib is used in a multi-threaded application, zalloc and zfree must be
-   thread safe.
+   thread safe.  In that case, zlib is thread-safe.  When zalloc and zfree are
+   Z_NULL on entry to the initialization function, they are set to internal
+   routines that use the standard library functions malloc() and free().
 
      On 16-bit systems, the functions zalloc and zfree must be able to allocate
    exactly 65536 bytes, but will not be required to allocate more than this if
@@ -155,7 +159,7 @@ typedef gz_header FAR *gz_headerp;
 
      The fields total_in and total_out can be used for statistics or progress
    reports.  After compression, total_in holds the total size of the
-   uncompressed data and may be saved for use in the decompressor (particularly
+   uncompressed data and may be saved for use by the decompressor (particularly
    if the decompressor wants to decompress everything in a single step).
 */
 
@@ -200,7 +204,7 @@ typedef gz_header FAR *gz_headerp;
 #define Z_TEXT     1
 #define Z_ASCII    Z_TEXT   /* for compatibility with 1.2.2 and earlier */
 #define Z_UNKNOWN  2
-/* Possible values of the data_type field (though see inflate()) */
+/* Possible values of the data_type field for deflate() */
 
 #define Z_DEFLATED   8
 /* The deflate compression method (the only one supported in this version) */
@@ -258,11 +262,11 @@ ZEXTERN int ZEXPORT deflate OF((z_streamp strm, int flush));
     enough room in the output buffer), next_in and avail_in are updated and
     processing will resume at this point for the next call of deflate().
 
-  - Provide more output starting at next_out and update next_out and avail_out
+  - Generate more output starting at next_out and update next_out and avail_out
     accordingly.  This action is forced if the parameter flush is non zero.
     Forcing flush frequently degrades the compression ratio, so this parameter
-    should be set only when necessary (in interactive applications).  Some
-    output may be provided even if flush is not set.
+    should be set only when necessary.  Some output may be provided even if
+    flush is zero.
 
     Before the call of deflate(), the application should ensure that at least
   one of the actions is possible, by providing more input and/or consuming more
@@ -271,7 +275,9 @@ ZEXTERN int ZEXPORT deflate OF((z_streamp strm, int flush));
   output when it wants, for example when the output buffer is full (avail_out
   == 0), or after each call of deflate().  If deflate returns Z_OK and with
   zero avail_out, it must be called again after making room in the output
-  buffer because there might be more output pending.
+  buffer because there might be more output pending. See deflatePending(),
+  which can be used if desired to determine whether or not there is more ouput
+  in that case.
 
     Normally the parameter flush is set to Z_NO_FLUSH, which allows deflate to
   decide how much data to accumulate before producing output, in order to
@@ -292,8 +298,8 @@ ZEXTERN int ZEXPORT deflate OF((z_streamp strm, int flush));
   input data so far will be available to the decompressor, as for Z_SYNC_FLUSH.
   This completes the current deflate block and follows it with an empty fixed
   codes block that is 10 bits long.  This assures that enough bytes are output
-  in order for the decompressor to finish the block before the empty fixed code
-  block.
+  in order for the decompressor to finish the block before the empty fixed
+  codes block.
 
     If flush is set to Z_BLOCK, a deflate block is completed and emitted, as
   for Z_SYNC_FLUSH, but the output is not aligned on a byte boundary, and up to
@@ -319,34 +325,38 @@ ZEXTERN int ZEXPORT deflate OF((z_streamp strm, int flush));
 
     If the parameter flush is set to Z_FINISH, pending input is processed,
   pending output is flushed and deflate returns with Z_STREAM_END if there was
-  enough output space; if deflate returns with Z_OK, this function must be
-  called again with Z_FINISH and more output space (updated avail_out) but no
-  more input data, until it returns with Z_STREAM_END or an error.  After
-  deflate has returned Z_STREAM_END, the only possible operations on the stream
-  are deflateReset or deflateEnd.
-
-    Z_FINISH can be used immediately after deflateInit if all the compression
-  is to be done in a single step.  In this case, avail_out must be at least the
-  value returned by deflateBound (see below).  Then deflate is guaranteed to
-  return Z_STREAM_END.  If not enough output space is provided, deflate will
-  not return Z_STREAM_END, and it must be called again as described above.
-
-    deflate() sets strm->adler to the adler32 checksum of all input read
-  so far (that is, total_in bytes).
+  enough output space.  If deflate returns with Z_OK or Z_BUF_ERROR, this
+  function must be called again with Z_FINISH and more output space (updated
+  avail_out) but no more input data, until it returns with Z_STREAM_END or an
+  error.  After deflate has returned Z_STREAM_END, the only possible operations
+  on the stream are deflateReset or deflateEnd.
+
+    Z_FINISH can be used in the first deflate call after deflateInit if all the
+  compression is to be done in a single step.  In order to complete in one
+  call, avail_out must be at least the value returned by deflateBound (see
+  below).  Then deflate is guaranteed to return Z_STREAM_END.  If not enough
+  output space is provided, deflate will not return Z_STREAM_END, and it must
+  be called again as described above.
+
+    deflate() sets strm->adler to the Adler-32 checksum of all input read
+  so far (that is, total_in bytes).  If a gzip stream is being generated, then
+  strm->adler will be the CRC-32 checksum of the input read so far.  (See
+  deflateInit2 below.)
 
     deflate() may update strm->data_type if it can make a good guess about
-  the input data type (Z_BINARY or Z_TEXT).  In doubt, the data is considered
-  binary.  This field is only for information purposes and does not affect the
-  compression algorithm in any manner.
+  the input data type (Z_BINARY or Z_TEXT).  If in doubt, the data is
+  considered binary.  This field is only for information purposes and does not
+  affect the compression algorithm in any manner.
 
     deflate() returns Z_OK if some progress has been made (more input
   processed or more output produced), Z_STREAM_END if all input has been
   consumed and all output has been produced (only when flush is set to
   Z_FINISH), Z_STREAM_ERROR if the stream state was inconsistent (for example
-  if next_in or next_out was Z_NULL), Z_BUF_ERROR if no progress is possible
-  (for example avail_in or avail_out was zero).  Note that Z_BUF_ERROR is not
-  fatal, and deflate() can be called again with more input and more output
-  space to continue compressing.
+  if next_in or next_out was Z_NULL or the state was inadvertently written over
+  by the application), or Z_BUF_ERROR if no progress is possible (for example
+  avail_in or avail_out was zero).  Note that Z_BUF_ERROR is not fatal, and
+  deflate() can be called again with more input and more output space to
+  continue compressing.
 */
 
 
@@ -369,23 +379,21 @@ ZEXTERN int ZEXPORT inflateInit OF((z_streamp strm));
 
      Initializes the internal stream state for decompression.  The fields
    next_in, avail_in, zalloc, zfree and opaque must be initialized before by
-   the caller.  If next_in is not Z_NULL and avail_in is large enough (the
-   exact value depends on the compression method), inflateInit determines the
-   compression method from the zlib header and allocates all data structures
-   accordingly; otherwise the allocation will be deferred to the first call of
-   inflate.  If zalloc and zfree are set to Z_NULL, inflateInit updates them to
-   use default allocation functions.
+   the caller.  In the current version of inflate, the provided input is not
+   read or consumed.  The allocation of a sliding window will be deferred to
+   the first call of inflate (if the decompression does not complete on the
+   first call).  If zalloc and zfree are set to Z_NULL, inflateInit updates
+   them to use default allocation functions.
 
      inflateInit returns Z_OK if success, Z_MEM_ERROR if there was not enough
    memory, Z_VERSION_ERROR if the zlib library version is incompatible with the
    version assumed by the caller, or Z_STREAM_ERROR if the parameters are
    invalid, such as a null pointer to the structure.  msg is set to null if
-   there is no error message.  inflateInit does not perform any decompression
-   apart from possibly reading the zlib header if present: actual decompression
-   will be done by inflate().  (So next_in and avail_in may be modified, but
-   next_out and avail_out are unused and unchanged.) The current implementation
-   of inflateInit() does not process any header information -- that is deferred
-   until inflate() is called.
+   there is no error message.  inflateInit does not perform any decompression.
+   Actual decompression will be done by inflate().  So next_in, and avail_in,
+   next_out, and avail_out are unused and unchanged.  The current
+   implementation of inflateInit() does not process any header information --
+   that is deferred until inflate() is called.
 */
 
 
@@ -401,17 +409,20 @@ ZEXTERN int ZEXPORT inflate OF((z_streamp strm, int flush));
 
   - Decompress more input starting at next_in and update next_in and avail_in
     accordingly.  If not all input can be processed (because there is not
-    enough room in the output buffer), next_in is updated and processing will
-    resume at this point for the next call of inflate().
+    enough room in the output buffer), then next_in and avail_in are updated
+    accordingly, and processing will resume at this point for the next call of
+    inflate().
 
-  - Provide more output starting at next_out and update next_out and avail_out
+  - Generate more output starting at next_out and update next_out and avail_out
     accordingly.  inflate() provides as much output as possible, until there is
     no more input data or no more space in the output buffer (see below about
     the flush parameter).
 
     Before the call of inflate(), the application should ensure that at least
   one of the actions is possible, by providing more input and/or consuming more
-  output, and updating the next_* and avail_* values accordingly.  The
+  output, and updating the next_* and avail_* values accordingly.  If the
+  caller of inflate() does not provide both available input and available
+  output space, it is possible that there will be no progress made.  The
   application can consume the uncompressed output when it wants, for example
   when the output buffer is full (avail_out == 0), or after each call of
   inflate().  If inflate returns Z_OK and with zero avail_out, it must be
@@ -428,7 +439,7 @@ ZEXTERN int ZEXPORT inflate OF((z_streamp strm, int flush));
   gets to the end of that block, or when it runs out of data.
 
     The Z_BLOCK option assists in appending to or combining deflate streams.
-  Also to assist in this, on return inflate() will set strm->data_type to the
+  To assist in this, on return inflate() always sets strm->data_type to the
   number of unused bits in the last byte taken from strm->next_in, plus 64 if
   inflate() is currently decoding the last block in the deflate stream, plus
   128 if inflate() returned immediately after decoding an end-of-block code or
@@ -454,7 +465,7 @@ ZEXTERN int ZEXPORT inflate OF((z_streamp strm, int flush));
   this case all pending input is processed and all pending output is flushed;
   avail_out must be large enough to hold all of the uncompressed data for the
   operation to complete.  (The size of the uncompressed data may have been
-  saved by the compressor for this purpose.) The use of Z_FINISH is not
+  saved by the compressor for this purpose.)  The use of Z_FINISH is not
   required to perform an inflation in one step.  However it may be used to
   inform inflate that a faster approach can be used for the single inflate()
   call.  Z_FINISH also informs inflate to not maintain a sliding window if the
@@ -476,32 +487,33 @@ ZEXTERN int ZEXPORT inflate OF((z_streamp strm, int flush));
   chosen by the compressor and returns Z_NEED_DICT; otherwise it sets
   strm->adler to the Adler-32 checksum of all output produced so far (that is,
   total_out bytes) and returns Z_OK, Z_STREAM_END or an error code as described
-  below.  At the end of the stream, inflate() checks that its computed adler32
+  below.  At the end of the stream, inflate() checks that its computed Adler-32
   checksum is equal to that saved by the compressor and returns Z_STREAM_END
   only if the checksum is correct.
 
     inflate() can decompress and check either zlib-wrapped or gzip-wrapped
   deflate data.  The header type is detected automatically, if requested when
   initializing with inflateInit2().  Any information contained in the gzip
-  header is not retained, so applications that need that information should
-  instead use raw inflate, see inflateInit2() below, or inflateBack() and
-  perform their own processing of the gzip header and trailer.  When processing
+  header is not retained unless inflateGetHeader() is used.  When processing
   gzip-wrapped deflate data, strm->adler32 is set to the CRC-32 of the output
-  producted so far.  The CRC-32 is checked against the gzip trailer.
+  produced so far.  The CRC-32 is checked against the gzip trailer, as is the
+  uncompressed length, modulo 2^32.
 
     inflate() returns Z_OK if some progress has been made (more input processed
   or more output produced), Z_STREAM_END if the end of the compressed data has
   been reached and all uncompressed output has been produced, Z_NEED_DICT if a
   preset dictionary is needed at this point, Z_DATA_ERROR if the input data was
   corrupted (input stream not conforming to the zlib format or incorrect check
-  value), Z_STREAM_ERROR if the stream structure was inconsistent (for example
-  next_in or next_out was Z_NULL), Z_MEM_ERROR if there was not enough memory,
-  Z_BUF_ERROR if no progress is possible or if there was not enough room in the
-  output buffer when Z_FINISH is used.  Note that Z_BUF_ERROR is not fatal, and
+  value, in which case strm->msg points to a string with a more specific
+  error), Z_STREAM_ERROR if the stream structure was inconsistent (for example
+  next_in or next_out was Z_NULL, or the state was inadvertently written over
+  by the application), Z_MEM_ERROR if there was not enough memory, Z_BUF_ERROR
+  if no progress was possible or if there was not enough room in the output
+  buffer when Z_FINISH is used.  Note that Z_BUF_ERROR is not fatal, and
   inflate() can be called again with more input and more output space to
   continue decompressing.  If Z_DATA_ERROR is returned, the application may
   then call inflateSync() to look for a good compression block if a partial
-  recovery of the data is desired.
+  recovery of the data is to be attempted.
 */
 
 
@@ -511,9 +523,8 @@ ZEXTERN int ZEXPORT inflateEnd OF((z_streamp strm));
    This function discards any unprocessed input and does not flush any pending
    output.
 
-     inflateEnd returns Z_OK if success, Z_STREAM_ERROR if the stream state
-   was inconsistent.  In the error case, msg may be set but then points to a
-   static string (which must not be deallocated).
+     inflateEnd returns Z_OK if success, or Z_STREAM_ERROR if the stream state
+   was inconsistent.
 */
 
 
@@ -544,16 +555,29 @@ ZEXTERN int ZEXPORT deflateInit2 OF((z_streamp strm,
    compression at the expense of memory usage.  The default value is 15 if
    deflateInit is used instead.
 
+     For the current implementation of deflate(), a windowBits value of 8 (a
+   window size of 256 bytes) is not supported.  As a result, a request for 8
+   will result in 9 (a 512-byte window).  In that case, providing 8 to
+   inflateInit2() will result in an error when the zlib header with 9 is
+   checked against the initialization of inflate().  The remedy is to not use 8
+   with deflateInit2() with this initialization, or at least in that case use 9
+   with inflateInit2().
+
      windowBits can also be -8..-15 for raw deflate.  In this case, -windowBits
    determines the window size.  deflate() will then generate raw deflate data
-   with no zlib header or trailer, and will not compute an adler32 check value.
+   with no zlib header or trailer, and will not compute a check value.
 
      windowBits can also be greater than 15 for optional gzip encoding.  Add
    16 to windowBits to write a simple gzip header and trailer around the
    compressed data instead of a zlib wrapper.  The gzip header will have no
    file name, no extra data, no comment, no modification time (set to zero), no
-   header crc, and the operating system will be set to 255 (unknown).  If a
-   gzip stream is being written, strm->adler is a crc32 instead of an adler32.
+   header crc, and the operating system will be set to the appropriate value,
+   if the operating system was determined at compile time.  If a gzip stream is
+   being written, strm->adler is a CRC-32 instead of an Adler-32.
+
+     For raw deflate or gzip encoding, a request for a 256-byte window is
+   rejected as invalid, since only the zlib header provides a means of
+   transmitting the window size to the decompressor.
 
      The memLevel parameter specifies how much memory should be allocated
    for the internal compression state.  memLevel=1 uses minimum memory but is
@@ -614,12 +638,12 @@ ZEXTERN int ZEXPORT deflateSetDictionary OF((z_streamp strm,
    addition, the current implementation of deflate will use at most the window
    size minus 262 bytes of the provided dictionary.
 
-     Upon return of this function, strm->adler is set to the adler32 value
+     Upon return of this function, strm->adler is set to the Adler-32 value
    of the dictionary; the decompressor may later use this value to determine
-   which dictionary has been used by the compressor.  (The adler32 value
+   which dictionary has been used by the compressor.  (The Adler-32 value
    applies to the whole dictionary even if only a subset of the dictionary is
    actually used by the compressor.) If a raw deflate was requested, then the
-   adler32 value is not computed and strm->adler is not set.
+   Adler-32 value is not computed and strm->adler is not set.
 
      deflateSetDictionary returns Z_OK if success, or Z_STREAM_ERROR if a
    parameter is invalid (e.g.  dictionary being Z_NULL) or the stream state is
@@ -628,6 +652,28 @@ ZEXTERN int ZEXPORT deflateSetDictionary OF((z_streamp strm,
    not perform any compression: this will be done by deflate().
 */
 
+ZEXTERN int ZEXPORT deflateGetDictionary OF((z_streamp strm,
+                                             Bytef *dictionary,
+                                             uInt  *dictLength));
+/*
+     Returns the sliding dictionary being maintained by deflate.  dictLength is
+   set to the number of bytes in the dictionary, and that many bytes are copied
+   to dictionary.  dictionary must have enough space, where 32768 bytes is
+   always enough.  If deflateGetDictionary() is called with dictionary equal to
+   Z_NULL, then only the dictionary length is returned, and nothing is copied.
+   Similary, if dictLength is Z_NULL, then it is not set.
+
+     deflateGetDictionary() may return a length less than the window size, even
+   when more than the window size in input has been provided. It may return up
+   to 258 bytes less in that case, due to how zlib's implementation of deflate
+   manages the sliding window and lookahead for matches, where matches can be
+   up to 258 bytes long. If the application needs the last window-size bytes of
+   input, then that would need to be saved by the application outside of zlib.
+
+     deflateGetDictionary returns Z_OK on success, or Z_STREAM_ERROR if the
+   stream state is inconsistent.
+*/
+
 ZEXTERN int ZEXPORT deflateCopy OF((z_streamp dest,
                                     z_streamp source));
 /*
@@ -648,10 +694,10 @@ ZEXTERN int ZEXPORT deflateCopy OF((z_streamp dest,
 
 ZEXTERN int ZEXPORT deflateReset OF((z_streamp strm));
 /*
-     This function is equivalent to deflateEnd followed by deflateInit,
-   but does not free and reallocate all the internal compression state.  The
-   stream will keep the same compression level and any other attributes that
-   may have been set by deflateInit2.
+     This function is equivalent to deflateEnd followed by deflateInit, but
+   does not free and reallocate the internal compression state.  The stream
+   will leave the compression level and any other attributes that may have been
+   set unchanged.
 
      deflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source
    stream state was inconsistent (such as zalloc or state being Z_NULL).
@@ -662,20 +708,36 @@ ZEXTERN int ZEXPORT deflateParams OF((z_streamp strm,
                                       int strategy));
 /*
      Dynamically update the compression level and compression strategy.  The
-   interpretation of level and strategy is as in deflateInit2.  This can be
+   interpretation of level and strategy is as in deflateInit2().  This can be
    used to switch between compression and straight copy of the input data, or
    to switch to a different kind of input data requiring a different strategy.
-   If the compression level is changed, the input available so far is
-   compressed with the old level (and may be flushed); the new level will take
-   effect only at the next call of deflate().
-
-     Before the call of deflateParams, the stream state must be set as for
-   a call of deflate(), since the currently available input may have to be
-   compressed and flushed.  In particular, strm->avail_out must be non-zero.
-
-     deflateParams returns Z_OK if success, Z_STREAM_ERROR if the source
-   stream state was inconsistent or if a parameter was invalid, Z_BUF_ERROR if
-   strm->avail_out was zero.
+   If the compression approach (which is a function of the level) or the
+   strategy is changed, and if any input has been consumed in a previous
+   deflate() call, then the input available so far is compressed with the old
+   level and strategy using deflate(strm, Z_BLOCK).  There are three approaches
+   for the compression levels 0, 1..3, and 4..9 respectively.  The new level
+   and strategy will take effect at the next call of deflate().
+
+     If a deflate(strm, Z_BLOCK) is performed by deflateParams(), and it does
+   not have enough output space to complete, then the parameter change will not
+   take effect.  In this case, deflateParams() can be called again with the
+   same parameters and more output space to try again.
+
+     In order to assure a change in the parameters on the first try, the
+   deflate stream should be flushed using deflate() with Z_BLOCK or other flush
+   request until strm.avail_out is not zero, before calling deflateParams().
+   Then no more input data should be provided before the deflateParams() call.
+   If this is done, the old level and strategy will be applied to the data
+   compressed before deflateParams(), and the new level and strategy will be
+   applied to the the data compressed after deflateParams().
+
+     deflateParams returns Z_OK on success, Z_STREAM_ERROR if the source stream
+   state was inconsistent or if a parameter was invalid, or Z_BUF_ERROR if
+   there was not enough output space to complete the compression of the
+   available input data before a change in the strategy or approach.  Note that
+   in the case of a Z_BUF_ERROR, the parameters are not changed.  A return
+   value of Z_BUF_ERROR is not fatal, in which case deflateParams() can be
+   retried with more output space.
 */
 
 ZEXTERN int ZEXPORT deflateTune OF((z_streamp strm,
@@ -793,7 +855,7 @@ ZEXTERN int ZEXPORT inflateInit2 OF((z_streamp strm,
    is for use with other formats that use the deflate compressed data format
    such as zip.  Those formats provide their own check values.  If a custom
    format is developed using the raw deflate format for compressed data, it is
-   recommended that a check value such as an adler32 or a crc32 be applied to
+   recommended that a check value such as an Adler-32 or a CRC-32 be applied to
    the uncompressed data as is done in the zlib, gzip, and zip formats.  For
    most applications, the zlib format should be used as is.  Note that comments
    above on the use in deflateInit2() applies to the magnitude of windowBits.
@@ -802,7 +864,10 @@ ZEXTERN int ZEXPORT inflateInit2 OF((z_streamp strm,
    32 to windowBits to enable zlib and gzip decoding with automatic header
    detection, or add 16 to decode only the gzip format (the zlib format will
    return a Z_DATA_ERROR).  If a gzip stream is being decoded, strm->adler is a
-   crc32 instead of an adler32.
+   CRC-32 instead of an Adler-32.  Unlike the gunzip utility and gzread() (see
+   below), inflate() will not automatically decode concatenated gzip streams.
+   inflate() will return Z_STREAM_END at the end of the gzip stream.  The state
+   would need to be reset to continue decoding a subsequent gzip stream.
 
      inflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
    memory, Z_VERSION_ERROR if the zlib library version is incompatible with the
@@ -823,7 +888,7 @@ ZEXTERN int ZEXPORT inflateSetDictionary OF((z_streamp strm,
      Initializes the decompression dictionary from the given uncompressed byte
    sequence.  This function must be called immediately after a call of inflate,
    if that call returned Z_NEED_DICT.  The dictionary chosen by the compressor
-   can be determined from the adler32 value returned by that call of inflate.
+   can be determined from the Adler-32 value returned by that call of inflate.
    The compressor and decompressor must use exactly the same dictionary (see
    deflateSetDictionary).  For raw inflate, this function can be called at any
    time to set the dictionary.  If the provided dictionary is smaller than the
@@ -834,7 +899,7 @@ ZEXTERN int ZEXPORT inflateSetDictionary OF((z_streamp strm,
      inflateSetDictionary returns Z_OK if success, Z_STREAM_ERROR if a
    parameter is invalid (e.g.  dictionary being Z_NULL) or the stream state is
    inconsistent, Z_DATA_ERROR if the given dictionary doesn't match the
-   expected one (incorrect adler32 value).  inflateSetDictionary does not
+   expected one (incorrect Adler-32 value).  inflateSetDictionary does not
    perform any decompression: this will be done by subsequent calls of
    inflate().
 */
@@ -892,7 +957,7 @@ ZEXTERN int ZEXPORT inflateCopy OF((z_streamp dest,
 ZEXTERN int ZEXPORT inflateReset OF((z_streamp strm));
 /*
      This function is equivalent to inflateEnd followed by inflateInit,
-   but does not free and reallocate all the internal decompression state.  The
+   but does not free and reallocate the internal decompression state.  The
    stream will keep attributes that may have been set by inflateInit2.
 
      inflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source
@@ -904,7 +969,9 @@ ZEXTERN int ZEXPORT inflateReset2 OF((z_streamp strm,
 /*
      This function is the same as inflateReset, but it also permits changing
    the wrap and window size requests.  The windowBits parameter is interpreted
-   the same as it is for inflateInit2.
+   the same as it is for inflateInit2.  If the window size is changed, then the
+   memory allocated for the window is freed, and the window will be reallocated
+   by inflate() if needed.
 
      inflateReset2 returns Z_OK if success, or Z_STREAM_ERROR if the source
    stream state was inconsistent (such as zalloc or state being Z_NULL), or if
@@ -956,7 +1023,7 @@ ZEXTERN long ZEXPORT inflateMark OF((z_streamp strm));
    location in the input stream can be determined from avail_in and data_type
    as noted in the description for the Z_BLOCK flush parameter for inflate.
 
-     inflateMark returns the value noted above or -1 << 16 if the provided
+     inflateMark returns the value noted above, or -65536 if the provided
    source stream state was inconsistent.
 */
 
@@ -1048,9 +1115,9 @@ ZEXTERN int ZEXPORT inflateBack OF((z_streamp strm,
    This routine would normally be used in a utility that reads zip or gzip
    files and writes out uncompressed files.  The utility would decode the
    header and process the trailer on its own, hence this routine expects only
-   the raw deflate stream to decompress.  This is different from the normal
-   behavior of inflate(), which expects either a zlib or gzip header and
-   trailer around the deflate stream.
+   the raw deflate stream to decompress.  This is different from the default
+   behavior of inflate(), which expects a zlib header and trailer around the
+   deflate stream.
 
      inflateBack() uses two subroutines supplied by the caller that are then
    called by inflateBack() for input and output.  inflateBack() calls those
@@ -1059,12 +1126,12 @@ ZEXTERN int ZEXPORT inflateBack OF((z_streamp strm,
    parameters and return types are defined above in the in_func and out_func
    typedefs.  inflateBack() will call in(in_desc, &buf) which should return the
    number of bytes of provided input, and a pointer to that input in buf.  If
-   there is no input available, in() must return zero--buf is ignored in that
-   case--and inflateBack() will return a buffer error.  inflateBack() will call
-   out(out_desc, buf, len) to write the uncompressed data buf[0..len-1].  out()
-   should return zero on success, or non-zero on failure.  If out() returns
-   non-zero, inflateBack() will return with an error.  Neither in() nor out()
-   are permitted to change the contents of the window provided to
+   there is no input available, in() must return zero -- buf is ignored in that
+   case -- and inflateBack() will return a buffer error.  inflateBack() will
+   call out(out_desc, buf, len) to write the uncompressed data buf[0..len-1].
+   out() should return zero on success, or non-zero on failure.  If out()
+   returns non-zero, inflateBack() will return with an error.  Neither in() nor
+   out() are permitted to change the contents of the window provided to
    inflateBackInit(), which is also the buffer that out() uses to write from.
    The length written by out() will be at most the window size.  Any non-zero
    amount of input may be provided by in().
@@ -1092,7 +1159,7 @@ ZEXTERN int ZEXPORT inflateBack OF((z_streamp strm,
    using strm->next_in which will be Z_NULL only if in() returned an error.  If
    strm->next_in is not Z_NULL, then the Z_BUF_ERROR was due to out() returning
    non-zero.  (in() will always be called before out(), so strm->next_in is
-   assured to be defined if out() returns non-zero.) Note that inflateBack()
+   assured to be defined if out() returns non-zero.)  Note that inflateBack()
    cannot return Z_OK.
 */
 
@@ -1114,7 +1181,7 @@ ZEXTERN uLong ZEXPORT zlibCompileFlags OF((void));
      7.6: size of z_off_t
 
     Compiler, assembler, and debug options:
-     8: DEBUG
+     8: ZLIB_DEBUG
      9: ASMV or ASMINF -- use ASM code
      10: ZLIB_WINAPI -- exported functions use the WINAPI calling convention
      11: 0 (reserved)
@@ -1164,7 +1231,8 @@ ZEXTERN int ZEXPORT compress OF((Bytef *dest,   uLongf *destLen,
    the byte length of the source buffer.  Upon entry, destLen is the total size
    of the destination buffer, which must be at least the value returned by
    compressBound(sourceLen).  Upon exit, destLen is the actual size of the
-   compressed buffer.
+   compressed data.  compress() is equivalent to compress2() with a level
+   parameter of Z_DEFAULT_COMPRESSION.
 
      compress returns Z_OK if success, Z_MEM_ERROR if there was not
    enough memory, Z_BUF_ERROR if there was not enough room in the output
@@ -1180,7 +1248,7 @@ ZEXTERN int ZEXPORT compress2 OF((Bytef *dest,   uLongf *destLen,
    length of the source buffer.  Upon entry, destLen is the total size of the
    destination buffer, which must be at least the value returned by
    compressBound(sourceLen).  Upon exit, destLen is the actual size of the
-   compressed buffer.
+   compressed data.
 
      compress2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
    memory, Z_BUF_ERROR if there was not enough room in the output buffer,
@@ -1203,7 +1271,7 @@ ZEXTERN int ZEXPORT uncompress OF((Bytef *dest,   uLongf *destLen,
    uncompressed data.  (The size of the uncompressed data must have been saved
    previously by the compressor and transmitted to the decompressor by some
    mechanism outside the scope of this compression library.) Upon exit, destLen
-   is the actual size of the uncompressed buffer.
+   is the actual size of the uncompressed data.
 
      uncompress returns Z_OK if success, Z_MEM_ERROR if there was not
    enough memory, Z_BUF_ERROR if there was not enough room in the output
@@ -1212,6 +1280,14 @@ ZEXTERN int ZEXPORT uncompress OF((Bytef *dest,   uLongf *destLen,
    buffer with the uncompressed data up to that point.
 */
 
+ZEXTERN int ZEXPORT uncompress2 OF((Bytef *dest,   uLongf *destLen,
+                                    const Bytef *source, uLong *sourceLen));
+/*
+     Same as uncompress, except that sourceLen is a pointer, where the
+   length of the source is *sourceLen.  On return, *sourceLen is the number of
+   source bytes consumed.
+*/
+
                         /* gzip file access functions */
 
 /*
@@ -1290,10 +1366,9 @@ ZEXTERN int ZEXPORT gzbuffer OF((gzFile file, unsigned size));
    default buffer size is 8192 bytes.  This function must be called after
    gzopen() or gzdopen(), and before any other calls that read or write the
    file.  The buffer memory allocation is always deferred to the first read or
-   write.  Two buffers are allocated, either both of the specified size when
-   writing, or one of the specified size and the other twice that size when
-   reading.  A larger buffer size of, for example, 64K or 128K bytes will
-   noticeably increase the speed of decompression (reading).
+   write.  Three times that size in buffer space is allocated.  A larger buffer
+   size of, for example, 64K or 128K bytes will noticeably increase the speed
+   of decompression (reading).
 
      The new buffer size also affects the maximum length for gzprintf().
 
@@ -1304,10 +1379,12 @@ ZEXTERN int ZEXPORT gzbuffer OF((gzFile file, unsigned size));
 ZEXTERN int ZEXPORT gzsetparams OF((gzFile file, int level, int strategy));
 /*
      Dynamically update the compression level or strategy.  See the description
-   of deflateInit2 for the meaning of these parameters.
+   of deflateInit2 for the meaning of these parameters.  Previously provided
+   data is flushed before the parameter change.
 
-     gzsetparams returns Z_OK if success, or Z_STREAM_ERROR if the file was not
-   opened for writing.
+     gzsetparams returns Z_OK if success, Z_STREAM_ERROR if the file was not
+   opened for writing, Z_ERRNO if there is an error writing the flushed data,
+   or Z_MEM_ERROR if there is a memory allocation error.
 */
 
 ZEXTERN int ZEXPORT gzread OF((gzFile file, voidp buf, unsigned len));
@@ -1335,7 +1412,35 @@ ZEXTERN int ZEXPORT gzread OF((gzFile file, voidp buf, unsigned len));
    case.
 
      gzread returns the number of uncompressed bytes actually read, less than
-   len for end of file, or -1 for error.
+   len for end of file, or -1 for error.  If len is too large to fit in an int,
+   then nothing is read, -1 is returned, and the error state is set to
+   Z_STREAM_ERROR.
+*/
+
+ZEXTERN z_size_t ZEXPORT gzfread OF((voidp buf, z_size_t size, z_size_t nitems,
+                                     gzFile file));
+/*
+     Read up to nitems items of size size from file to buf, otherwise operating
+   as gzread() does.  This duplicates the interface of stdio's fread(), with
+   size_t request and return types.  If the library defines size_t, then
+   z_size_t is identical to size_t.  If not, then z_size_t is an unsigned
+   integer type that can contain a pointer.
+
+     gzfread() returns the number of full items read of size size, or zero if
+   the end of the file was reached and a full item could not be read, or if
+   there was an error.  gzerror() must be consulted if zero is returned in
+   order to determine if there was an error.  If the multiplication of size and
+   nitems overflows, i.e. the product does not fit in a z_size_t, then nothing
+   is read, zero is returned, and the error state is set to Z_STREAM_ERROR.
+
+     In the event that the end of file is reached and only a partial item is
+   available at the end, i.e. the remaining uncompressed data length is not a
+   multiple of size, then the final partial item is nevetheless read into buf
+   and the end-of-file flag is set.  The length of the partial item read is not
+   provided, but could be inferred from the result of gztell().  This behavior
+   is the same as the behavior of fread() implementations in common libraries,
+   but it prevents the direct use of gzfread() to read a concurrently written
+   file, reseting and retrying on end-of-file, when size is not 1.
 */
 
 ZEXTERN int ZEXPORT gzwrite OF((gzFile file,
@@ -1346,19 +1451,33 @@ ZEXTERN int ZEXPORT gzwrite OF((gzFile file,
    error.
 */
 
+ZEXTERN z_size_t ZEXPORT gzfwrite OF((voidpc buf, z_size_t size,
+                                      z_size_t nitems, gzFile file));
+/*
+     gzfwrite() writes nitems items of size size from buf to file, duplicating
+   the interface of stdio's fwrite(), with size_t request and return types.  If
+   the library defines size_t, then z_size_t is identical to size_t.  If not,
+   then z_size_t is an unsigned integer type that can contain a pointer.
+
+     gzfwrite() returns the number of full items written of size size, or zero
+   if there was an error.  If the multiplication of size and nitems overflows,
+   i.e. the product does not fit in a z_size_t, then nothing is written, zero
+   is returned, and the error state is set to Z_STREAM_ERROR.
+*/
+
 ZEXTERN int ZEXPORTVA gzprintf Z_ARG((gzFile file, const char *format, ...));
 /*
      Converts, formats, and writes the arguments to the compressed file under
    control of the format string, as in fprintf.  gzprintf returns the number of
-   uncompressed bytes actually written, or 0 in case of error.  The number of
-   uncompressed bytes written is limited to 8191, or one less than the buffer
-   size given to gzbuffer().  The caller should assure that this limit is not
-   exceeded.  If it is exceeded, then gzprintf() will return an error (0) with
-   nothing written.  In this case, there may also be a buffer overflow with
-   unpredictable consequences, which is possible only if zlib was compiled with
-   the insecure functions sprintf() or vsprintf() because the secure snprintf()
-   or vsnprintf() functions were not available.  This can be determined using
-   zlibCompileFlags().
+   uncompressed bytes actually written, or a negative zlib error code in case
+   of error.  The number of uncompressed bytes written is limited to 8191, or
+   one less than the buffer size given to gzbuffer().  The caller should assure
+   that this limit is not exceeded.  If it is exceeded, then gzprintf() will
+   return an error (0) with nothing written.  In this case, there may also be a
+   buffer overflow with unpredictable consequences, which is possible only if
+   zlib was compiled with the insecure functions sprintf() or vsprintf()
+   because the secure snprintf() or vsnprintf() functions were not available.
+   This can be determined using zlibCompileFlags().
 */
 
 ZEXTERN int ZEXPORT gzputs OF((gzFile file, const char *s));
@@ -1418,7 +1537,7 @@ ZEXTERN int ZEXPORT gzflush OF((gzFile file, int flush));
      If the flush parameter is Z_FINISH, the remaining data is written and the
    gzip stream is completed in the output.  If gzwrite() is called again, a new
    gzip stream will be started in the output.  gzread() is able to read such
-   concatented gzip streams.
+   concatenated gzip streams.
 
      gzflush should be called only when strictly necessary because it will
    degrade compression if called too often.
@@ -1572,7 +1691,7 @@ ZEXTERN uLong ZEXPORT adler32 OF((uLong adler, const Bytef *buf, uInt len));
    return the updated checksum.  If buf is Z_NULL, this function returns the
    required initial value for the checksum.
 
-     An Adler-32 checksum is almost as reliable as a CRC32 but can be computed
+     An Adler-32 checksum is almost as reliable as a CRC-32 but can be computed
    much faster.
 
    Usage example:
@@ -1585,6 +1704,12 @@ ZEXTERN uLong ZEXPORT adler32 OF((uLong adler, const Bytef *buf, uInt len));
      if (adler != original_adler) error();
 */
 
+ZEXTERN uLong ZEXPORT adler32_z OF((uLong adler, const Bytef *buf,
+                                    z_size_t len));
+/*
+     Same as adler32(), but with a size_t length.
+*/
+
 /*
 ZEXTERN uLong ZEXPORT adler32_combine OF((uLong adler1, uLong adler2,
                                           z_off_t len2));
@@ -1614,6 +1739,12 @@ ZEXTERN uLong ZEXPORT crc32   OF((uLong crc, const Bytef *buf, uInt len));
      if (crc != original_crc) error();
 */
 
+ZEXTERN uLong ZEXPORT crc32_z OF((uLong adler, const Bytef *buf,
+                                  z_size_t len));
+/*
+     Same as crc32(), but with a size_t length.
+*/
+
 /*
 ZEXTERN uLong ZEXPORT crc32_combine OF((uLong crc1, uLong crc2, z_off_t len2));
 
@@ -1644,19 +1775,35 @@ ZEXTERN int ZEXPORT inflateBackInit_ OF((z_streamp strm, int windowBits,
                                          unsigned char FAR *window,
                                          const char *version,
                                          int stream_size));
-#define deflateInit(strm, level) \
-        deflateInit_((strm), (level), ZLIB_VERSION, (int)sizeof(z_stream))
-#define inflateInit(strm) \
-        inflateInit_((strm), ZLIB_VERSION, (int)sizeof(z_stream))
-#define deflateInit2(strm, level, method, windowBits, memLevel, strategy) \
-        deflateInit2_((strm),(level),(method),(windowBits),(memLevel),\
-                      (strategy), ZLIB_VERSION, (int)sizeof(z_stream))
-#define inflateInit2(strm, windowBits) \
-        inflateInit2_((strm), (windowBits), ZLIB_VERSION, \
-                      (int)sizeof(z_stream))
-#define inflateBackInit(strm, windowBits, window) \
-        inflateBackInit_((strm), (windowBits), (window), \
-                      ZLIB_VERSION, (int)sizeof(z_stream))
+#ifdef Z_PREFIX_SET
+#  define z_deflateInit(strm, level) \
+          deflateInit_((strm), (level), ZLIB_VERSION, (int)sizeof(z_stream))
+#  define z_inflateInit(strm) \
+          inflateInit_((strm), ZLIB_VERSION, (int)sizeof(z_stream))
+#  define z_deflateInit2(strm, level, method, windowBits, memLevel, strategy) \
+          deflateInit2_((strm),(level),(method),(windowBits),(memLevel),\
+                        (strategy), ZLIB_VERSION, (int)sizeof(z_stream))
+#  define z_inflateInit2(strm, windowBits) \
+          inflateInit2_((strm), (windowBits), ZLIB_VERSION, \
+                        (int)sizeof(z_stream))
+#  define z_inflateBackInit(strm, windowBits, window) \
+          inflateBackInit_((strm), (windowBits), (window), \
+                           ZLIB_VERSION, (int)sizeof(z_stream))
+#else
+#  define deflateInit(strm, level) \
+          deflateInit_((strm), (level), ZLIB_VERSION, (int)sizeof(z_stream))
+#  define inflateInit(strm) \
+          inflateInit_((strm), ZLIB_VERSION, (int)sizeof(z_stream))
+#  define deflateInit2(strm, level, method, windowBits, memLevel, strategy) \
+          deflateInit2_((strm),(level),(method),(windowBits),(memLevel),\
+                        (strategy), ZLIB_VERSION, (int)sizeof(z_stream))
+#  define inflateInit2(strm, windowBits) \
+          inflateInit2_((strm), (windowBits), ZLIB_VERSION, \
+                        (int)sizeof(z_stream))
+#  define inflateBackInit(strm, windowBits, window) \
+          inflateBackInit_((strm), (windowBits), (window), \
+                           ZLIB_VERSION, (int)sizeof(z_stream))
+#endif
 
 #ifndef Z_SOLO
 
@@ -1676,10 +1823,10 @@ ZEXTERN int ZEXPORT gzgetc_ OF((gzFile file));  /* backward compatibility */
 #ifdef Z_PREFIX_SET
 #  undef z_gzgetc
 #  define z_gzgetc(g) \
-          ((g)->have ? ((g)->have--, (g)->pos++, *((g)->next)++) : gzgetc(g))
+          ((g)->have ? ((g)->have--, (g)->pos++, *((g)->next)++) : (gzgetc)(g))
 #else
 #  define gzgetc(g) \
-          ((g)->have ? ((g)->have--, (g)->pos++, *((g)->next)++) : gzgetc(g))
+          ((g)->have ? ((g)->have--, (g)->pos++, *((g)->next)++) : (gzgetc)(g))
 #endif
 
 /* provide 64-bit offset functions if _LARGEFILE64_SOURCE defined, and/or
@@ -1737,19 +1884,16 @@ ZEXTERN int ZEXPORT gzgetc_ OF((gzFile file));  /* backward compatibility */
 
 #endif /* !Z_SOLO */
 
-/* hack for buggy compilers */
-#if !defined(ZUTIL_H) && !defined(NO_DUMMY_DECL)
-    struct internal_state {int dummy;};
-#endif
-
 /* undocumented functions */
 ZEXTERN const char   * ZEXPORT zError           OF((int));
 ZEXTERN int            ZEXPORT inflateSyncPoint OF((z_streamp));
 ZEXTERN const z_crc_t FAR * ZEXPORT get_crc_table    OF((void));
 ZEXTERN int            ZEXPORT inflateUndermine OF((z_streamp, int));
+ZEXTERN int            ZEXPORT inflateValidate OF((z_streamp, int));
+ZEXTERN unsigned long  ZEXPORT inflateCodesUsed OF ((z_streamp));
 ZEXTERN int            ZEXPORT inflateResetKeep OF((z_streamp));
 ZEXTERN int            ZEXPORT deflateResetKeep OF((z_streamp));
-#if defined(_WIN32) && !defined(Z_SOLO)
+#if (defined(_WIN32) || defined(__CYGWIN__)) && !defined(Z_SOLO)
 ZEXTERN gzFile         ZEXPORT gzopen_w OF((const wchar_t *path,
                                             const char *mode));
 #endif
diff --git a/deps/zlib/zutil.c b/deps/zlib/zutil.c
index 2fe2a71..a76c6b0 100644
--- a/deps/zlib/zutil.c
+++ b/deps/zlib/zutil.c
@@ -1,27 +1,27 @@
 /* zutil.c -- target dependent utility functions for the compression library
- * Copyright (C) 1995-2005, 2010, 2011, 2012 Jean-loup Gailly.
+ * Copyright (C) 1995-2017 Jean-loup Gailly
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
 /* @(#) $Id$ */
 
 #include "zutil.h"
-
-#ifndef NO_DUMMY_DECL
-struct internal_state      {int dummy;}; /* for buggy compilers */
+#ifndef Z_SOLO
+#  include "gzguts.h"
 #endif
 
 z_const char * const z_errmsg[10] = {
-"need dictionary",     /* Z_NEED_DICT       2  */
-"stream end",          /* Z_STREAM_END      1  */
-"",                    /* Z_OK              0  */
-"file error",          /* Z_ERRNO         (-1) */
-"stream error",        /* Z_STREAM_ERROR  (-2) */
-"data error",          /* Z_DATA_ERROR    (-3) */
-"insufficient memory", /* Z_MEM_ERROR     (-4) */
-"buffer error",        /* Z_BUF_ERROR     (-5) */
-"incompatible version",/* Z_VERSION_ERROR (-6) */
-""};
+    (z_const char *)"need dictionary",     /* Z_NEED_DICT       2  */
+    (z_const char *)"stream end",          /* Z_STREAM_END      1  */
+    (z_const char *)"",                    /* Z_OK              0  */
+    (z_const char *)"file error",          /* Z_ERRNO         (-1) */
+    (z_const char *)"stream error",        /* Z_STREAM_ERROR  (-2) */
+    (z_const char *)"data error",          /* Z_DATA_ERROR    (-3) */
+    (z_const char *)"insufficient memory", /* Z_MEM_ERROR     (-4) */
+    (z_const char *)"buffer error",        /* Z_BUF_ERROR     (-5) */
+    (z_const char *)"incompatible version",/* Z_VERSION_ERROR (-6) */
+    (z_const char *)""
+};
 
 
 const char * ZEXPORT zlibVersion()
@@ -58,7 +58,7 @@ uLong ZEXPORT zlibCompileFlags()
     case 8:     flags += 2 << 6;        break;
     default:    flags += 3 << 6;
     }
-#ifdef DEBUG
+#ifdef ZLIB_DEBUG
     flags += 1 << 8;
 #endif
 #if defined(ASMV) || defined(ASMINF)
@@ -112,8 +112,8 @@ uLong ZEXPORT zlibCompileFlags()
     return flags;
 }
 
-#ifdef DEBUG
-
+#ifdef ZLIB_DEBUG
+#include <stdlib.h>
 #  ifndef verbose
 #    define verbose 0
 #  endif
@@ -216,9 +216,11 @@ local ptr_table table[MAX_PTR];
 
 voidpf ZLIB_INTERNAL zcalloc (voidpf opaque, unsigned items, unsigned size)
 {
-    voidpf buf = opaque; /* just to make some compilers happy */
+    voidpf buf;
     ulg bsize = (ulg)items*size;
 
+    (void)opaque;
+
     /* If we allocate less than 65520 bytes, we assume that farmalloc
      * will return a usable pointer which doesn't have to be normalized.
      */
@@ -241,6 +243,9 @@ voidpf ZLIB_INTERNAL zcalloc (voidpf opaque, unsigned items, unsigned size)
 void ZLIB_INTERNAL zcfree (voidpf opaque, voidpf ptr)
 {
     int n;
+
+    (void)opaque;
+
     if (*(ush*)&ptr != 0) { /* object < 64K */
         farfree(ptr);
         return;
@@ -256,7 +261,6 @@ void ZLIB_INTERNAL zcfree (voidpf opaque, voidpf ptr)
         next_ptr--;
         return;
     }
-    ptr = opaque; /* just to make some compilers happy */
     Assert(0, "zcfree: ptr not found");
 }
 
@@ -275,13 +279,13 @@ void ZLIB_INTERNAL zcfree (voidpf opaque, voidpf ptr)
 
 voidpf ZLIB_INTERNAL zcalloc (voidpf opaque, uInt items, uInt size)
 {
-    if (opaque) opaque = 0; /* to make compiler happy */
+    (void)opaque;
     return _halloc((long)items, size);
 }
 
 void ZLIB_INTERNAL zcfree (voidpf opaque, voidpf ptr)
 {
-    if (opaque) opaque = 0; /* to make compiler happy */
+    (void)opaque;
     _hfree(ptr);
 }
 
@@ -303,7 +307,7 @@ voidpf ZLIB_INTERNAL zcalloc (opaque, items, size)
     unsigned items;
     unsigned size;
 {
-    if (opaque) items += size - size; /* make compiler happy */
+    (void)opaque;
     return sizeof(uInt) > 2 ? (voidpf)malloc(items * size) :
                               (voidpf)calloc(items, size);
 }
@@ -312,8 +316,8 @@ void ZLIB_INTERNAL zcfree (opaque, ptr)
     voidpf opaque;
     voidpf ptr;
 {
+    (void)opaque;
     free(ptr);
-    if (opaque) return; /* make compiler happy */
 }
 
 #endif /* MY_ZCALLOC */
diff --git a/deps/zlib/zutil.h b/deps/zlib/zutil.h
index 24ab06b..b079ea6 100644
--- a/deps/zlib/zutil.h
+++ b/deps/zlib/zutil.h
@@ -1,5 +1,5 @@
 /* zutil.h -- internal interface and configuration of the compression library
- * Copyright (C) 1995-2013 Jean-loup Gailly.
+ * Copyright (C) 1995-2016 Jean-loup Gailly, Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
@@ -36,7 +36,9 @@
 #ifndef local
 #  define local static
 #endif
-/* compile with -Dlocal if your debugger can't find static symbols */
+/* since "static" is used to mean two completely different things in C, we
+   define "local" for the non-static meaning of "static", for readability
+   (compile with -Dlocal if your debugger can't find static symbols) */
 
 typedef unsigned char  uch;
 typedef uch FAR uchf;
@@ -98,28 +100,38 @@ extern z_const char * const z_errmsg[10]; /* indexed by 2-zlib_error */
 #endif
 
 #ifdef AMIGA
-#  define OS_CODE  0x01
+#  define OS_CODE  1
 #endif
 
 #if defined(VAXC) || defined(VMS)
-#  define OS_CODE  0x02
+#  define OS_CODE  2
 #  define F_OPEN(name, mode) \
      fopen((name), (mode), "mbc=60", "ctx=stm", "rfm=fix", "mrs=512")
 #endif
 
+#ifdef __370__
+#  if __TARGET_LIB__ < 0x20000000
+#    define OS_CODE 4
+#  elif __TARGET_LIB__ < 0x40000000
+#    define OS_CODE 11
+#  else
+#    define OS_CODE 8
+#  endif
+#endif
+
 #if defined(ATARI) || defined(atarist)
-#  define OS_CODE  0x05
+#  define OS_CODE  5
 #endif
 
 #ifdef OS2
-#  define OS_CODE  0x06
+#  define OS_CODE  6
 #  if defined(M_I86) && !defined(Z_SOLO)
 #    include <malloc.h>
 #  endif
 #endif
 
 #if defined(MACOS) || defined(TARGET_OS_MAC)
-#  define OS_CODE  0x07
+#  define OS_CODE  7
 #  ifndef Z_SOLO
 #    if defined(__MWERKS__) && __dest_os != __be_os && __dest_os != __win32_os
 #      include <unix.h> /* for fdopen */
@@ -131,18 +143,24 @@ extern z_const char * const z_errmsg[10]; /* indexed by 2-zlib_error */
 #  endif
 #endif
 
-#ifdef TOPS20
-#  define OS_CODE  0x0a
+#ifdef __acorn
+#  define OS_CODE 13
 #endif
 
-#ifdef WIN32
-#  ifndef __CYGWIN__  /* Cygwin is Unix, not Win32 */
-#    define OS_CODE  0x0b
-#  endif
+#if defined(WIN32) && !defined(__CYGWIN__)
+#  define OS_CODE  10
+#endif
+
+#ifdef _BEOS_
+#  define OS_CODE  16
+#endif
+
+#ifdef __TOS_OS400__
+#  define OS_CODE 18
 #endif
 
-#ifdef __50SERIES /* Prime/PRIMOS */
-#  define OS_CODE  0x0f
+#ifdef __APPLE__
+#  define OS_CODE 19
 #endif
 
 #if defined(_BEOS_) || defined(RISCOS)
@@ -177,7 +195,7 @@ extern z_const char * const z_errmsg[10]; /* indexed by 2-zlib_error */
         /* common defaults */
 
 #ifndef OS_CODE
-#  define OS_CODE  0x03  /* assume Unix */
+#  define OS_CODE  3     /* assume Unix */
 #endif
 
 #ifndef F_OPEN
@@ -216,7 +234,7 @@ extern z_const char * const z_errmsg[10]; /* indexed by 2-zlib_error */
 #endif
 
 /* Diagnostic functions */
-#ifdef DEBUG
+#ifdef ZLIB_DEBUG
 #  include <stdio.h>
    extern int ZLIB_INTERNAL z_verbose;
    extern void ZLIB_INTERNAL z_error OF((char *m));