kmx git

Commit	Date	Message
26c1cb91	2013-12-09T09:44:03	One more rename/cleanup for callback err functions
c7b3e1b3	2013-12-06T15:42:20	Some callback error check style cleanups I find this easier to read...
dab89f9b	2013-12-04T21:22:57	Further EUSER and error propagation fixes This continues auditing all the places where GIT_EUSER is being returned and making sure to clear any existing error using the new giterr_user_cancel helper. As a result, places that relied on intercepting GIT_EUSER but having the old error preserved also needed to be cleaned up to correctly stash and then retrieve the actual error. Additionally, as I encountered places where error codes were not being propagated correctly, I tried to fix them up. A number of those fixes are included in the this commit as well.
96869a4e	2013-12-03T16:45:39	Improve GIT_EUSER handling This adds giterr_user_cancel to return GIT_EUSER and clear any error message that is sitting around. As a result of using that in places, we need to be more thorough with capturing errors that happen inside a callback when used internally. To help with that, this also adds giterr_capture and giterr_restore so that when we internally use a foreach-type function that clears errors and converts them to GIT_EUSER, it is easier to restore not just the return value, but the actual error message text.
9f77b3f6	2013-11-25T14:21:34	Add config read fns with controlled error behavior This adds `git_config__lookup_entry` which will look up a key in a config and return either the entry or NULL if the key was not present. Optionally, it can either suppress all errors or can return them (although not finding the key is not an error for this function). Unlike other accessors, this does not normalize the config key string, so it must only be used when the key is known to be in normalized form (i.e. all lower-case before the first dot and after the last dot, with no invalid characters). This also adds three high-level helper functions to look up config values with no errors and a fallback value. The three functions are for string, bool, and int values, and will resort to the fallback value for any error that arises. They are: * `git_config__get_string_force` * `git_config__get_bool_force` * `git_config__get_int_force` None of them normalize the config `key` either, so they can only be used for internal cases where the key is known to be in normal format.
25e0b157	2013-12-06T15:07:57	Remove converting user error to GIT_EUSER This changes the behavior of callbacks so that the callback error code is not converted into GIT_EUSER and instead we propagate the return value through to the caller. Instead of using the giterr_capture and giterr_restore functions, we now rely on all functions to pass back the return value from a callback. To avoid having a return value with no error message, the user can call the public giterr_set_str or some such function to set an error message. There is a new helper 'giterr_set_callback' that functions can invoke after making a callback which ensures that some error message was set in case the callback did not set one. In places where the sign of the callback return value is meaningful (e.g. positive to skip, negative to abort), only the negative values are returned back to the caller, obviously, since the other values allow for continuing the loop. The hardest parts of this were in the checkout code where positive return values were overloaded as meaningful values for checkout. I fixed this by adding an output parameter to many of the internal checkout functions and removing the overload. This added some code, but it is probably a better implementation. There is some funkiness in the network code where user provided callbacks could be returning a positive or a negative value and we want to rely on that to cancel the loop. There are still a couple places where an user error might get turned into GIT_EUSER there, I think, though none exercised by the tests.
157cef10	2013-10-28T12:57:15	The "common.h" should be included before "config.h". When building libgit2 for ia32 architecture on a x64 machine, including "config.h" without a "common.h" would result the following error: C:\Program Files\Microsoft SDKs\Windows\v7.1\include\winbase.h(2288): error C2373: 'InterlockedIncrement' : redefinition; different type modifiers [C:\cygwin\home\zcbenz\codes\git-utils\build\libgit2.vcxproj] C:\Program Files\Microsoft SDKs\Windows\v7.1\include\winbase.h(2295): error C2373: 'InterlockedDecrement' : redefinition; different type modifiers [C:\cygwin\home\zcbenz\codes\git-utils\build\libgit2.vcxproj] C:\Program Files\Microsoft SDKs\Windows\v7.1\include\winbase.h(2303): error C2373: 'InterlockedExchange' : redefinition; different type modifiers [C:\cygwin\home\zcbenz\codes\git-utils\build\libgit2.vcxproj] C:\Program Files\Microsoft SDKs\Windows\v7.1\include\winbase.h(2314): error C2373: 'InterlockedExchangeAdd' : redefinition; different type modifiers [C:\cygwin\home\zcbenz\codes\git-utils\build\libgit2.vcxproj]
974774c7	2013-09-09T16:57:34	Add attributes to filters and fix registry The filter registry as implemented was too primitive to actually work once multiple filters were coming into play. This expands the implementation of the registry to handle multiple prioritized filters correctly. Additionally, this adds an "attributes" field to a filter that makes it really really easy to implement filters that are based on one or more attribute values. The lookup and even simple value checking can all happen automatically without custom filter code. Lastly, with the registry improvements, this fills out the filter lifecycle callbacks, with initialize and shutdown callbacks that will be called before the filter is first used and after it is last invoked. This allows for system-wide initialization and cleanup by the filter.
7a5ee3dc	2013-05-24T11:09:04	Add ~ expansion to global attributes and excludes This adds ~/ prefix expansion for the value of core.attributesfile and core.excludesfile, plus it fixes the fact that the attributes cache was holding on to the string data from the config for a long time (instead of making its own strdup) which could have caused a problem if the config was refreshed. Adds a test for the new expansion capability.
0cb16fe9	2013-05-15T20:26:55	Unify whitespaces to tabs
b7f167da	2013-04-29T13:52:12	Make git_oid_cmp public and add git_oid__cmp
5540d947	2013-03-15T16:39:00	Implement global/system file search paths The goal of this work is to expose the search logic for "global", "system", and "xdg" files through the git_libgit2_opts() interface. Behind the scenes, I changed the logic for finding files to have a notion of a git_strarray that represents a search path and to store a separate search path for each of the three tiers of config file. For each tier, I implemented a function to initialize it to default values (generally based on environment variables), and then general interfaces to get it, set it, reset it, and prepend new directories to it. Next, I exposed these interfaces through the git_libgit2_opts interface, reusing the GIT_CONFIG_LEVEL_SYSTEM, etc., constants for the user to control which search path they were modifying. There are alternative designs for the opts interface / argument ordering, so I'm putting this phase out for discussion. Additionally, I ended up doing a little bit of clean up regarding attr.h and attr_file.h, adding a new attrcache.h so the other two files wouldn't have to be included in so many places.
37d91686	2013-02-22T12:21:54	Do not fail if .gitignore is directory This is designed to fix libgit2sharp #350 where if .gitignore is a directory we abort all operations that process ignores instead of just skipping it as core git does. Also added test that fails without this change and passes with it.
11d9f6b3	2013-01-27T14:17:07	Vector improvements and their fallout
6ac724af	2012-12-18T15:12:06	Clear error to avoid leaving invalid error behind
f45d51ff	2012-11-20T19:57:46	API updates for index.h
c1f61af6	2012-10-31T20:52:01	I LIKE THESE NAMES
c8b511f3	2012-10-31T11:26:12	Better naming for file timestamp/size checker
744cc03e	2012-10-30T12:10:36	Add git_config_refresh() API to reload config This adds a new API that allows users to reload the config if the file has changed on disk. A new config callback function to refresh the config was added. The modified time and file size are used to test if the file needs to be reloaded (and are now stored in the disk backend object). In writing tests, just using mtime was a problem / race, so I wanted to check file size as well. To support that, I extended `git_futils_readbuffer_updated` to optionally check file size in addition to mtime, and I added a new function `git_filebuf_stats` to fetch the mtime and size for an open filebuf (so that the config could be easily refreshed after a write). Lastly, I moved some similar file checking code for attributes into filebuf. It is still only being used for attrs, but it seems potentially reusable, so I thought I'd move it over.
f45ec1a0	2012-10-29T20:04:21	index refactoring
ec40b7f9	2012-09-17T15:42:41	Support for core.ignorecase
f335ecd6	2012-08-30T14:24:16	Diff iterators This refactors the diff output code so that an iterator object can be used to traverse and generate the diffs, instead of just the `foreach()` style with callbacks. The code has been rearranged so that the two styles can still share most functions. This also replaces `GIT_REVWALKOVER` with `GIT_ITEROVER` and uses that as a common error code for marking the end of iteration when using a iterator style of object.
7fbca880	2012-08-24T14:32:45	Support new config locations As of git v1.7.12, $HOME/.config/git/ is supported as a new location for "config", "attributes", and "ignore" files.
f004c4a8	2012-08-21T17:26:39	Add public API for internal ignores This creates a public API for adding to the internal ignores list, which already existing but was not accessible. This adds the new default value for core.excludesfile also.
c07d9c95	2012-08-09T15:33:04	oid: Explicitly include `oid.h` for the inlined CMP
51e1d808	2012-08-06T12:41:08	Merge remote-tracking branch 'arrbee/tree-walk-fixes' into development Conflicts: src/notes.c src/transports/git.c src/transports/http.c src/transports/local.c tests-clar/odb/foreach.c
5dca2010	2012-08-03T17:08:01	Update iterators for consistency across library This updates all the `foreach()` type functions across the library that take callbacks from the user to have a consistent behavior. The rules are: * A callback terminates the loop by returning any non-zero value * Once the callback returns non-zero, it will not be called again (i.e. the loop stops all iteration regardless of state) * If the callback returns non-zero, the parent fn returns GIT_EUSER * Although the parent returns GIT_EUSER, no error will be set in the library and `giterr_last()` will return NULL if called. This commit makes those changes across the library and adds tests for most of the iteration APIs to make sure that they follow the above rules.
e25dda51	2012-08-02T01:38:30	Merge remote-tracking branch 'nulltoken/topic/amd64-compat' into development Conflicts: src/netops.c src/netops.h src/oid.c
0c9eacf3	2012-08-02T01:15:24	attr: Do not export variables externally Fixes #824 Exporting variables in a dynamic library is a PITA. Let's keep these values internally and wrap them through a helper method. This doesn't break the external API. @arrbee, aren't you glad I turned the `GIT_ATTR_` macros into function macros? :sparkles:
b8457baa	2012-07-24T07:57:58	portability: Improve x86/amd64 compatibility
3f035860	2012-06-07T22:43:03	misc: Fix warnings from PVS Studio trial
2a99df69	2012-05-24T17:14:56	Fix bugs for status with spaces and reloaded attrs This fixes two bugs: * Issue #728 where git_status_file was not working for files that contain spaces. This was caused by reusing the "fnmatch" parsing code from ignore and attribute files to interpret the "pathspec" that constrained the files to apply the status to. In that code, unescaped whitespace was considered terminal to the pattern, so a file with internal whitespace was excluded from the matched files. The fix was to add a mode to that code that allows spaces and tabs inside patterns. This mode only comes into play when parsing in-memory strings. * The other issue was undetected, but it was in the recently added code to reload gitattributes / gitignores when they were changed on disk. That code was not clearing out the old values from the cached file content before reparsing which meant that newly added patterns would be read in, but deleted patterns would not be removed. The fix was to clear the vector of patterns in a cached file before reparsing the file.
904b67e6	2012-05-18T01:48:50	errors: Rename error codes
e172cf08	2012-05-18T01:21:06	errors: Rename the generic return codes
29e948de	2012-05-10T10:38:10	global: Change parameter ordering in API Consistency is good.
dc13f1f7	2012-05-10T11:08:59	Add cache busting to attribute cache This makes the git attributes and git ignores cache check stat information before using the file contents from the cache. For cached files from the index, it checks the SHA of the file instead. This should reduce the need to ever call `git_attr_cache_flush()` in most situations. This commit also fixes the `git_status_should_ignore` API to use the libgit2 standard parameter ordering.
cba285d3	2012-05-07T13:30:27	Fix directory finding for attrs The fix to support attrs on bare repos went a little too far in trying to avoid using the working directory and ended up not processing the input path quite correctly.
b709e951	2012-05-04T11:06:12	Fix memory leaks and use after free
f917481e	2012-05-03T16:37:25	Support reading attributes from index Depending on the operation, we need to consider gitattributes in both the work dir and the index. This adds a parameter to all of the gitattributes related functions that allows user control of attribute reading behavior (i.e. prefer workdir, prefer index, only use index). This fix also covers allowing us to check attributes (and hence do diff and status) on bare repositories. This was a somewhat larger change that I hoped because it had to change the cache key used for gitattributes files.
d58336dd	2012-04-26T10:51:45	Fix leading slash behavior in attrs/ignores We were not following the git behavior for leading slashes in path names when matching git ignores and git attribute file patterns. This should fix issue #638.
c2b67043	2012-04-25T15:20:28	Rename git_khash_str to git_strmap, etc. This renamed `git_khash_str` to `git_strmap`, `git_hash_oid` to `git_oidmap`, and deletes `git_hashtable` from the tree, plus adds unit tests for `git_strmap`.
01fed0a8	2012-04-25T10:36:01	Convert hashtable usage over to khash This updates khash.h with some extra features (like error checking on allocations, ability to use wrapped malloc, foreach calls, etc), creates two high-level wrappers around khash: `git_khash_str` and `git_khash_oid` for string-to-void-ptr and oid-to-void-ptr tables, then converts all of the old usage of `git_hashtable` over to use these new hashtables. For `git_khash_str`, I've tried to create a set of macros that yield an API not too unlike the old `git_hashtable` API. Since the oid hashtable is only used in one file, I haven't bother to set up all those macros and just use the khash APIs directly for now.
19fa2bc1	2012-04-17T15:12:50	Convert attrs and diffs to use string pools This converts the git attr related code (including ignores) and the git diff related code (and implicitly the status code) to use `git_pools` for storing strings. This reduces the number of small blocks allocated dramatically.
7784bcbb	2012-04-11T11:52:59	Refactor git_repository_open with new options Add a new command `git_repository_open_ext` with extended options that control how searching for a repository will be done. The existing `git_repository_open` and `git_repository_discover` are reimplemented on top of it. We may want to change the default behavior of `git_repository_open` but this commit does not do that. Improve support for "gitdir" files where the work dir is separate from the repo and support for the "separate-git-dir" config. Also, add support for opening repos created with `git-new-workdir` script (although I have only confirmed that they can be opened, not that all functions work correctly). There are also a few minor changes that came up: - Fix `git_path_prettify` to allow in-place prettifying. - Fix `git_path_root` to support backslashes on Win32. This fix should help many repo open/discover scenarios - it is the one function called when opening before prettifying the path. - Tweak `git_config_get_string` to set the "out" pointer to NULL if the config value is not found. Allows some other cleanup. - Fix a couple places that should have been calling `git_repository_config__weakptr` and were not. - Fix `cl_git_sandbox_init` clar helper to support bare repos.
95dfb031	2012-03-30T14:40:50	Improve config handling for diff,submodules,attrs This adds support for a bunch of core.* settings that affect diff and status, plus fixes up some incorrect implementations of those settings from before. Also, this cleans up the handling of config settings in the new submodules code and in the old attrs/ignore code.
0d0fa7c3	2012-03-16T15:56:01	Convert attr, ignore, mwindow, status to new errors Also cleaned up some previously converted code that still had little things to polish.
ab43ad2f	2012-03-14T11:07:14	Convert attr and other files to new errors This continues to add other files to the new error handling style. I think the only real concerns here are that there are a couple of error return cases that I have converted to asserts, but I think that it was the correct thing to do given the new error style.
9d160ba8	2012-03-06T01:37:56	diff: Fix rebase breackage
854eccbb	2012-02-29T12:04:59	Clean up GIT_UNUSED macros on all platforms It turns out that commit 31e9cfc4cbcaf1b38cdd3dbe3282a8f57e5366a5 did not fix the GIT_USUSED behavior on all platforms. This commit walks through and really cleans things up more thoroughly, getting rid of the unnecessary stuff. To remove the use of some GIT_UNUSED, I ended up adding a couple of new iterators for hashtables that allow you to iterator just over keys or just over values. In making this change, I found a bug in the clar tests (where we were doing count++ but meant to do (count)++ to increment the value). I fixed that but then found the test failing because it was not really using an empty repo. So, I took some of the code that I wrote for iterator testing and moved it to clar_helpers.c, then made use of that to make it easier to open fixtures on a per test basis even within a single test file.
b6c93aef	2012-02-21T14:46:24	Uniform iterators for trees, index, and workdir This create a new git_iterator type of object that provides a uniform interface for iterating over the index, an arbitrary tree, or the working directory of a repository. As part of this, git ignore support was extended to support push and pop of directory-based ignore files as the working directory is being traversed (so the array of ignores does not have to be recreated at each directory during traveral). There are a number of other small utility functions in buffer, path, vector, and fileops that are included in this patch that made the iterator implementation cleaner.
e8c96ed2	2012-02-01T12:30:35	Add unit tests for recent bug fixes Add unit tests to confirm ignore directory pattern matches and to confirm that ignore and attribute files are loaded properly into the attribute file cache.
62a1f713	2012-02-01T11:54:42	Fix memory leak in attr file cache Actually look for the file by the same cache key that we store it under. Rocket science!
adc9bdb3	2012-01-31T13:59:32	Fix attr path is_dir check When building an attr path object, the code that checks if the file is a directory was evaluating the file as a relative path to the current working directory, instead of using the repo root. This lead to inconsistent behavior.
63ab73be	2012-01-20T11:13:17	Merge branch 'fix-subdir-attr-paths' into development This resolves issue #535 and issue #533.
1744fafe	2012-01-17T15:49:47	Move path related functions from fileops to path This takes all of the functions that look up simple data about paths (such as `git_futils_isdir`) and moves them over to path.h (becoming `git_path_isdir`). This leaves fileops.h just with functions that actually manipulate the filesystem or look at the file contents in some way. As part of this, the dir.h header which is really just for win32 support was moved into win32 (with some minor changes).
83bfbdf5	2012-01-16T18:00:18	Remove poor git__removechar function Going back over this, the git__removechar function was not needed (only invoked once) and is actually mislabeled. As implemented, it really only made sense for removing backslash characters, since two of the "removed" characters in a row would include the second one -- i.e. it really implements stripping backslash-escaped strings where a backslash allows internal whitespace in a word.
a51cd8e6	2012-01-16T16:58:27	Fix handling of relative paths for attrs Per issue #533, the handling of relative paths in attribute and ignore files was not right. Fixed this by pre-joining the relative path of the attribute/ignore file onto the match string when a full path match is required. Unfortunately, fixing this required a bit more code than I would have liked because I had to juggle things around so that the fnmatch parser would have sufficient information to prepend the relative path when it was needed.
cfbc880d	2012-01-16T15:16:44	Patch cleanup for merge After reviewing the gitignore support with Vicent, we came up with a list of minor cleanups to prepare for merge, including: * checking git_repository_config error returns * renaming git_ignore_is_ignored and moving to status.h * fixing next_line skipping to include \r skips * commenting on where ignores are and are not included
1dbcc9fc	2012-01-11T21:07:16	Fix several memory issues This contains fixes for several issues discovered by MSVC and by valgrind, including some bad data access, some memory leakage (in where certain files were not being successfully added to the cache), and some code simplification.
0cfcff5d	2012-01-11T20:41:55	Convert git_path_walk_up to regular function This gets rid of the crazy macro version of git_path_walk_up and makes it into a normal function that takes a callback parameter. This turned out not to be too messy.
df743c7d	2012-01-09T15:37:19	Initial implementation of gitignore support Adds support for .gitignore files to git_status_foreach() and git_status_file(). This includes refactoring the gitattributes code to share logic where possible. The GIT_STATUS_IGNORED flag will now be passed in for files that are ignored (provided they are not already in the index or the head of repo).
acb159e1	2012-01-04T17:59:48	Fix MSVC compilation warnings
c6d2a2c0	2011-12-29T21:31:30	Fixed up memory leaks
73b51450	2011-12-28T23:28:50	Add support for macros and cache flush API. Add support for git attribute macro definitions. Also, add support for cache flush API to clear the attribute file content cache when needed. Additionally, improved the handling of global and system files, making common utility functions in fileops and converting config and attr to both use the common functions. Adds a bunch more tests and fixed some memory leaks. Note that adding macros required me to use refcounted attribute assignment definitions, which complicated, but probably improved memory usage.
ee1f0b1a	2011-12-16T10:56:43	Add APIs for git attributes This adds APIs for querying git attributes. In addition to the new API in include/git2/attr.h, most of the action is in src/attr_file.[hc] which contains utilities for dealing with a single attributes file, and src/attr.[hc] which contains the implementation of the APIs that merge all applicable attributes files.

26c1cb91

2013-12-09T09:44:03

One more rename/cleanup for callback err functions

c7b3e1b3

2013-12-06T15:42:20

Some callback error check style cleanups I find this easier to read...

dab89f9b

2013-12-04T21:22:57

Further EUSER and error propagation fixes This continues auditing all the places where GIT_EUSER is being returned and making sure to clear any existing error using the new giterr_user_cancel helper. As a result, places that relied on intercepting GIT_EUSER but having the old error preserved also needed to be cleaned up to correctly stash and then retrieve the actual error. Additionally, as I encountered places where error codes were not being propagated correctly, I tried to fix them up. A number of those fixes are included in the this commit as well.

96869a4e

2013-12-03T16:45:39

Improve GIT_EUSER handling This adds giterr_user_cancel to return GIT_EUSER and clear any error message that is sitting around. As a result of using that in places, we need to be more thorough with capturing errors that happen inside a callback when used internally. To help with that, this also adds giterr_capture and giterr_restore so that when we internally use a foreach-type function that clears errors and converts them to GIT_EUSER, it is easier to restore not just the return value, but the actual error message text.

9f77b3f6

2013-11-25T14:21:34

Add config read fns with controlled error behavior This adds `git_config__lookup_entry` which will look up a key in a config and return either the entry or NULL if the key was not present. Optionally, it can either suppress all errors or can return them (although not finding the key is not an error for this function). Unlike other accessors, this does not normalize the config key string, so it must only be used when the key is known to be in normalized form (i.e. all lower-case before the first dot and after the last dot, with no invalid characters). This also adds three high-level helper functions to look up config values with no errors and a fallback value. The three functions are for string, bool, and int values, and will resort to the fallback value for any error that arises. They are: * `git_config__get_string_force` * `git_config__get_bool_force` * `git_config__get_int_force` None of them normalize the config `key` either, so they can only be used for internal cases where the key is known to be in normal format.

25e0b157

2013-12-06T15:07:57

Remove converting user error to GIT_EUSER This changes the behavior of callbacks so that the callback error code is not converted into GIT_EUSER and instead we propagate the return value through to the caller. Instead of using the giterr_capture and giterr_restore functions, we now rely on all functions to pass back the return value from a callback. To avoid having a return value with no error message, the user can call the public giterr_set_str or some such function to set an error message. There is a new helper 'giterr_set_callback' that functions can invoke after making a callback which ensures that some error message was set in case the callback did not set one. In places where the sign of the callback return value is meaningful (e.g. positive to skip, negative to abort), only the negative values are returned back to the caller, obviously, since the other values allow for continuing the loop. The hardest parts of this were in the checkout code where positive return values were overloaded as meaningful values for checkout. I fixed this by adding an output parameter to many of the internal checkout functions and removing the overload. This added some code, but it is probably a better implementation. There is some funkiness in the network code where user provided callbacks could be returning a positive or a negative value and we want to rely on that to cancel the loop. There are still a couple places where an user error might get turned into GIT_EUSER there, I think, though none exercised by the tests.

157cef10

2013-10-28T12:57:15

The "common.h" should be included before "config.h". When building libgit2 for ia32 architecture on a x64 machine, including "config.h" without a "common.h" would result the following error: C:\Program Files\Microsoft SDKs\Windows\v7.1\include\winbase.h(2288): error C2373: 'InterlockedIncrement' : redefinition; different type modifiers [C:\cygwin\home\zcbenz\codes\git-utils\build\libgit2.vcxproj] C:\Program Files\Microsoft SDKs\Windows\v7.1\include\winbase.h(2295): error C2373: 'InterlockedDecrement' : redefinition; different type modifiers [C:\cygwin\home\zcbenz\codes\git-utils\build\libgit2.vcxproj] C:\Program Files\Microsoft SDKs\Windows\v7.1\include\winbase.h(2303): error C2373: 'InterlockedExchange' : redefinition; different type modifiers [C:\cygwin\home\zcbenz\codes\git-utils\build\libgit2.vcxproj] C:\Program Files\Microsoft SDKs\Windows\v7.1\include\winbase.h(2314): error C2373: 'InterlockedExchangeAdd' : redefinition; different type modifiers [C:\cygwin\home\zcbenz\codes\git-utils\build\libgit2.vcxproj]

974774c7

2013-09-09T16:57:34

Add attributes to filters and fix registry The filter registry as implemented was too primitive to actually work once multiple filters were coming into play. This expands the implementation of the registry to handle multiple prioritized filters correctly. Additionally, this adds an "attributes" field to a filter that makes it really really easy to implement filters that are based on one or more attribute values. The lookup and even simple value checking can all happen automatically without custom filter code. Lastly, with the registry improvements, this fills out the filter lifecycle callbacks, with initialize and shutdown callbacks that will be called before the filter is first used and after it is last invoked. This allows for system-wide initialization and cleanup by the filter.

7a5ee3dc

2013-05-24T11:09:04

Add ~ expansion to global attributes and excludes This adds ~/ prefix expansion for the value of core.attributesfile and core.excludesfile, plus it fixes the fact that the attributes cache was holding on to the string data from the config for a long time (instead of making its own strdup) which could have caused a problem if the config was refreshed. Adds a test for the new expansion capability.

0cb16fe9

2013-05-15T20:26:55

Unify whitespaces to tabs

b7f167da

2013-04-29T13:52:12

Make git_oid_cmp public and add git_oid__cmp

5540d947

2013-03-15T16:39:00

Implement global/system file search paths The goal of this work is to expose the search logic for "global", "system", and "xdg" files through the git_libgit2_opts() interface. Behind the scenes, I changed the logic for finding files to have a notion of a git_strarray that represents a search path and to store a separate search path for each of the three tiers of config file. For each tier, I implemented a function to initialize it to default values (generally based on environment variables), and then general interfaces to get it, set it, reset it, and prepend new directories to it. Next, I exposed these interfaces through the git_libgit2_opts interface, reusing the GIT_CONFIG_LEVEL_SYSTEM, etc., constants for the user to control which search path they were modifying. There are alternative designs for the opts interface / argument ordering, so I'm putting this phase out for discussion. Additionally, I ended up doing a little bit of clean up regarding attr.h and attr_file.h, adding a new attrcache.h so the other two files wouldn't have to be included in so many places.

37d91686

2013-02-22T12:21:54

Do not fail if .gitignore is directory This is designed to fix libgit2sharp #350 where if .gitignore is a directory we abort all operations that process ignores instead of just skipping it as core git does. Also added test that fails without this change and passes with it.

11d9f6b3

2013-01-27T14:17:07

Vector improvements and their fallout

6ac724af

2012-12-18T15:12:06

Clear error to avoid leaving invalid error behind

f45d51ff

2012-11-20T19:57:46

API updates for index.h

c1f61af6

2012-10-31T20:52:01

I LIKE THESE NAMES

c8b511f3

2012-10-31T11:26:12

Better naming for file timestamp/size checker

744cc03e

2012-10-30T12:10:36

Add git_config_refresh() API to reload config This adds a new API that allows users to reload the config if the file has changed on disk. A new config callback function to refresh the config was added. The modified time and file size are used to test if the file needs to be reloaded (and are now stored in the disk backend object). In writing tests, just using mtime was a problem / race, so I wanted to check file size as well. To support that, I extended `git_futils_readbuffer_updated` to optionally check file size in addition to mtime, and I added a new function `git_filebuf_stats` to fetch the mtime and size for an open filebuf (so that the config could be easily refreshed after a write). Lastly, I moved some similar file checking code for attributes into filebuf. It is still only being used for attrs, but it seems potentially reusable, so I thought I'd move it over.

f45ec1a0

2012-10-29T20:04:21

index refactoring

ec40b7f9

2012-09-17T15:42:41

Support for core.ignorecase

f335ecd6

2012-08-30T14:24:16

Diff iterators This refactors the diff output code so that an iterator object can be used to traverse and generate the diffs, instead of just the `foreach()` style with callbacks. The code has been rearranged so that the two styles can still share most functions. This also replaces `GIT_REVWALKOVER` with `GIT_ITEROVER` and uses that as a common error code for marking the end of iteration when using a iterator style of object.

7fbca880

2012-08-24T14:32:45

Support new config locations As of git v1.7.12, $HOME/.config/git/ is supported as a new location for "config", "attributes", and "ignore" files.

f004c4a8

2012-08-21T17:26:39

Add public API for internal ignores This creates a public API for adding to the internal ignores list, which already existing but was not accessible. This adds the new default value for core.excludesfile also.

c07d9c95

2012-08-09T15:33:04

oid: Explicitly include `oid.h` for the inlined CMP

51e1d808

2012-08-06T12:41:08

Merge remote-tracking branch 'arrbee/tree-walk-fixes' into development Conflicts: src/notes.c src/transports/git.c src/transports/http.c src/transports/local.c tests-clar/odb/foreach.c

5dca2010

2012-08-03T17:08:01

Update iterators for consistency across library This updates all the `foreach()` type functions across the library that take callbacks from the user to have a consistent behavior. The rules are: * A callback terminates the loop by returning any non-zero value * Once the callback returns non-zero, it will not be called again (i.e. the loop stops all iteration regardless of state) * If the callback returns non-zero, the parent fn returns GIT_EUSER * Although the parent returns GIT_EUSER, no error will be set in the library and `giterr_last()` will return NULL if called. This commit makes those changes across the library and adds tests for most of the iteration APIs to make sure that they follow the above rules.

e25dda51

2012-08-02T01:38:30

Merge remote-tracking branch 'nulltoken/topic/amd64-compat' into development Conflicts: src/netops.c src/netops.h src/oid.c

0c9eacf3

2012-08-02T01:15:24

attr: Do not export variables externally Fixes #824 Exporting variables in a dynamic library is a PITA. Let's keep these values internally and wrap them through a helper method. This doesn't break the external API. @arrbee, aren't you glad I turned the `GIT_ATTR_` macros into function macros? :sparkles:

b8457baa

2012-07-24T07:57:58

portability: Improve x86/amd64 compatibility

3f035860

2012-06-07T22:43:03

misc: Fix warnings from PVS Studio trial

2a99df69

2012-05-24T17:14:56

Fix bugs for status with spaces and reloaded attrs This fixes two bugs: * Issue #728 where git_status_file was not working for files that contain spaces. This was caused by reusing the "fnmatch" parsing code from ignore and attribute files to interpret the "pathspec" that constrained the files to apply the status to. In that code, unescaped whitespace was considered terminal to the pattern, so a file with internal whitespace was excluded from the matched files. The fix was to add a mode to that code that allows spaces and tabs inside patterns. This mode only comes into play when parsing in-memory strings. * The other issue was undetected, but it was in the recently added code to reload gitattributes / gitignores when they were changed on disk. That code was not clearing out the old values from the cached file content before reparsing which meant that newly added patterns would be read in, but deleted patterns would not be removed. The fix was to clear the vector of patterns in a cached file before reparsing the file.

904b67e6

2012-05-18T01:48:50

errors: Rename error codes

e172cf08

2012-05-18T01:21:06

errors: Rename the generic return codes

29e948de

2012-05-10T10:38:10

global: Change parameter ordering in API Consistency is good.

dc13f1f7

2012-05-10T11:08:59

Add cache busting to attribute cache This makes the git attributes and git ignores cache check stat information before using the file contents from the cache. For cached files from the index, it checks the SHA of the file instead. This should reduce the need to ever call `git_attr_cache_flush()` in most situations. This commit also fixes the `git_status_should_ignore` API to use the libgit2 standard parameter ordering.

cba285d3

2012-05-07T13:30:27

Fix directory finding for attrs The fix to support attrs on bare repos went a little too far in trying to avoid using the working directory and ended up not processing the input path quite correctly.

b709e951

2012-05-04T11:06:12

Fix memory leaks and use after free

f917481e

2012-05-03T16:37:25

Support reading attributes from index Depending on the operation, we need to consider gitattributes in both the work dir and the index. This adds a parameter to all of the gitattributes related functions that allows user control of attribute reading behavior (i.e. prefer workdir, prefer index, only use index). This fix also covers allowing us to check attributes (and hence do diff and status) on bare repositories. This was a somewhat larger change that I hoped because it had to change the cache key used for gitattributes files.

d58336dd

2012-04-26T10:51:45

Fix leading slash behavior in attrs/ignores We were not following the git behavior for leading slashes in path names when matching git ignores and git attribute file patterns. This should fix issue #638.

c2b67043

2012-04-25T15:20:28

Rename git_khash_str to git_strmap, etc. This renamed `git_khash_str` to `git_strmap`, `git_hash_oid` to `git_oidmap`, and deletes `git_hashtable` from the tree, plus adds unit tests for `git_strmap`.

01fed0a8

2012-04-25T10:36:01

Convert hashtable usage over to khash This updates khash.h with some extra features (like error checking on allocations, ability to use wrapped malloc, foreach calls, etc), creates two high-level wrappers around khash: `git_khash_str` and `git_khash_oid` for string-to-void-ptr and oid-to-void-ptr tables, then converts all of the old usage of `git_hashtable` over to use these new hashtables. For `git_khash_str`, I've tried to create a set of macros that yield an API not too unlike the old `git_hashtable` API. Since the oid hashtable is only used in one file, I haven't bother to set up all those macros and just use the khash APIs directly for now.

19fa2bc1

2012-04-17T15:12:50

Convert attrs and diffs to use string pools This converts the git attr related code (including ignores) and the git diff related code (and implicitly the status code) to use `git_pools` for storing strings. This reduces the number of small blocks allocated dramatically.

7784bcbb

2012-04-11T11:52:59

Refactor git_repository_open with new options Add a new command `git_repository_open_ext` with extended options that control how searching for a repository will be done. The existing `git_repository_open` and `git_repository_discover` are reimplemented on top of it. We may want to change the default behavior of `git_repository_open` but this commit does not do that. Improve support for "gitdir" files where the work dir is separate from the repo and support for the "separate-git-dir" config. Also, add support for opening repos created with `git-new-workdir` script (although I have only confirmed that they can be opened, not that all functions work correctly). There are also a few minor changes that came up: - Fix `git_path_prettify` to allow in-place prettifying. - Fix `git_path_root` to support backslashes on Win32. This fix should help many repo open/discover scenarios - it is the one function called when opening before prettifying the path. - Tweak `git_config_get_string` to set the "out" pointer to NULL if the config value is not found. Allows some other cleanup. - Fix a couple places that should have been calling `git_repository_config__weakptr` and were not. - Fix `cl_git_sandbox_init` clar helper to support bare repos.

95dfb031

2012-03-30T14:40:50

Improve config handling for diff,submodules,attrs This adds support for a bunch of core.* settings that affect diff and status, plus fixes up some incorrect implementations of those settings from before. Also, this cleans up the handling of config settings in the new submodules code and in the old attrs/ignore code.

0d0fa7c3

2012-03-16T15:56:01

Convert attr, ignore, mwindow, status to new errors Also cleaned up some previously converted code that still had little things to polish.

ab43ad2f

2012-03-14T11:07:14

Convert attr and other files to new errors This continues to add other files to the new error handling style. I think the only real concerns here are that there are a couple of error return cases that I have converted to asserts, but I think that it was the correct thing to do given the new error style.

9d160ba8

2012-03-06T01:37:56

diff: Fix rebase breackage

854eccbb

2012-02-29T12:04:59

Clean up GIT_UNUSED macros on all platforms It turns out that commit 31e9cfc4cbcaf1b38cdd3dbe3282a8f57e5366a5 did not fix the GIT_USUSED behavior on all platforms. This commit walks through and really cleans things up more thoroughly, getting rid of the unnecessary stuff. To remove the use of some GIT_UNUSED, I ended up adding a couple of new iterators for hashtables that allow you to iterator just over keys or just over values. In making this change, I found a bug in the clar tests (where we were doing *count++ but meant to do (*count)++ to increment the value). I fixed that but then found the test failing because it was not really using an empty repo. So, I took some of the code that I wrote for iterator testing and moved it to clar_helpers.c, then made use of that to make it easier to open fixtures on a per test basis even within a single test file.

b6c93aef

2012-02-21T14:46:24

Uniform iterators for trees, index, and workdir This create a new git_iterator type of object that provides a uniform interface for iterating over the index, an arbitrary tree, or the working directory of a repository. As part of this, git ignore support was extended to support push and pop of directory-based ignore files as the working directory is being traversed (so the array of ignores does not have to be recreated at each directory during traveral). There are a number of other small utility functions in buffer, path, vector, and fileops that are included in this patch that made the iterator implementation cleaner.

e8c96ed2

2012-02-01T12:30:35

Add unit tests for recent bug fixes Add unit tests to confirm ignore directory pattern matches and to confirm that ignore and attribute files are loaded properly into the attribute file cache.

62a1f713

2012-02-01T11:54:42

Fix memory leak in attr file cache Actually look for the file by the same cache key that we store it under. Rocket science!

adc9bdb3

2012-01-31T13:59:32

Fix attr path is_dir check When building an attr path object, the code that checks if the file is a directory was evaluating the file as a relative path to the current working directory, instead of using the repo root. This lead to inconsistent behavior.

63ab73be

2012-01-20T11:13:17

Merge branch 'fix-subdir-attr-paths' into development This resolves issue #535 and issue #533.

1744fafe

2012-01-17T15:49:47

Move path related functions from fileops to path This takes all of the functions that look up simple data about paths (such as `git_futils_isdir`) and moves them over to path.h (becoming `git_path_isdir`). This leaves fileops.h just with functions that actually manipulate the filesystem or look at the file contents in some way. As part of this, the dir.h header which is really just for win32 support was moved into win32 (with some minor changes).

83bfbdf5

2012-01-16T18:00:18

Remove poor git__removechar function Going back over this, the git__removechar function was not needed (only invoked once) and is actually mislabeled. As implemented, it really only made sense for removing backslash characters, since two of the "removed" characters in a row would include the second one -- i.e. it really implements stripping backslash-escaped strings where a backslash allows internal whitespace in a word.

a51cd8e6

2012-01-16T16:58:27

Fix handling of relative paths for attrs Per issue #533, the handling of relative paths in attribute and ignore files was not right. Fixed this by pre-joining the relative path of the attribute/ignore file onto the match string when a full path match is required. Unfortunately, fixing this required a bit more code than I would have liked because I had to juggle things around so that the fnmatch parser would have sufficient information to prepend the relative path when it was needed.

cfbc880d

2012-01-16T15:16:44

Patch cleanup for merge After reviewing the gitignore support with Vicent, we came up with a list of minor cleanups to prepare for merge, including: * checking git_repository_config error returns * renaming git_ignore_is_ignored and moving to status.h * fixing next_line skipping to include \r skips * commenting on where ignores are and are not included

1dbcc9fc

2012-01-11T21:07:16

Fix several memory issues This contains fixes for several issues discovered by MSVC and by valgrind, including some bad data access, some memory leakage (in where certain files were not being successfully added to the cache), and some code simplification.

0cfcff5d

2012-01-11T20:41:55

Convert git_path_walk_up to regular function This gets rid of the crazy macro version of git_path_walk_up and makes it into a normal function that takes a callback parameter. This turned out not to be too messy.

df743c7d

2012-01-09T15:37:19

Initial implementation of gitignore support Adds support for .gitignore files to git_status_foreach() and git_status_file(). This includes refactoring the gitattributes code to share logic where possible. The GIT_STATUS_IGNORED flag will now be passed in for files that are ignored (provided they are not already in the index or the head of repo).

acb159e1

2012-01-04T17:59:48

Fix MSVC compilation warnings

c6d2a2c0

2011-12-29T21:31:30

Fixed up memory leaks

73b51450

2011-12-28T23:28:50

Add support for macros and cache flush API. Add support for git attribute macro definitions. Also, add support for cache flush API to clear the attribute file content cache when needed. Additionally, improved the handling of global and system files, making common utility functions in fileops and converting config and attr to both use the common functions. Adds a bunch more tests and fixed some memory leaks. Note that adding macros required me to use refcounted attribute assignment definitions, which complicated, but probably improved memory usage.

ee1f0b1a

2011-12-16T10:56:43

Add APIs for git attributes This adds APIs for querying git attributes. In addition to the new API in include/git2/attr.h, most of the action is in src/attr_file.[hc] which contains utilities for dealing with a single attributes file, and src/attr.[hc] which contains the implementation of the APIs that merge all applicable attributes files.

thodg/libgit2/src/attr.c

src/attr.c

Log