kmx git

Commit	Date	Message
ba8b8c04	2013-08-07T09:17:20	Improve building ignore file lists The routines to push and pop ignore files while traversing a directory had some issues. In particular, setting up the initial list would sometimes push an ignore file before it ought to be applied if the starting path was a directory containing an ignore file. Also, the pop function was not always matching the right part of the path and would fail to pop ignores from the list in some cases. This adds some tests that exercise a particular problematic case and then fixes the problems that I could find related to this. At some point, I'd like to isolate this ignore rule management code and rewrite it, but that's a larger project and right now, I'll opt to just try to fix the broken behaviors.
33d532dc	2013-08-09T09:32:06	Merge pull request #1462 from yorah/fix/libgit2sharp-issue-379 status: fix handling of filenames with special prefixes
114f5a6c	2013-06-10T10:10:39	Reorganize diff and add basic diff driver This is a significant reorganization of the diff code to break it into a set of more clearly distinct files and to document the new organization. Hopefully this will make the diff code easier to understand and to extend. This adds a new `git_diff_driver` object that looks of diff driver information from the attributes and the config so that things like function content in diff headers can be provided. The full driver spec is not implemented in the commit - this is focused on the reorganization of the code and putting the driver hooks in place. This also removes a few #includes from src/repository.h that were overbroad, but as a result required extra #includes in a variety of places since including src/repository.h no longer results in pulling in the whole world.
2e40a60e	2013-04-11T17:29:05	status: fix handling of filenames with special prefixes Fix libgit2/libgit2sharp#379
ccfa6805	2013-03-25T23:58:40	Fix some diff ignores and submodule dirty workdir This started out trying to look at the problems from issue #1425 and gradually grew to a broader set of fixes. There are two core things fixed here: 1. When you had an ignore like "/bin" which is rooted at the top of your tree, instead of immediately adding the "bin/" entry as an ignored item in the diff, we were returning all of the direct descendants of the directory as ignored items. This changes things to immediately ignore the directory. Note that this effects the behavior in test_status_ignore__subdirectories so that we no longer exactly match core gits ignore behavior, but the new behavior probably makes more sense (i.e. we now will include an ignored directory inside an untracked directory that we previously would have left off). 2. When a submodule only contained working directory changes, the diff code was always considering it unmodified which was just an outright bug. The HEAD SHA of the submodule matches the SHA in the parent repo index, and since the SHAs matches, the diff code was overwriting the actual status with UNMODIFIED. These fixes broke existing tests test_diff_workdir__submodules and test_status_ignore__subdirectories but looking it over, I actually think the new results are correct and the old results were wrong. @nulltoken had actually commented on the subdirectory ignore issue previously. I also included in the tests some debugging versions of the shared iteration callback routines that print status or diff information. These aren't used actively in the tests, but can be quickly swapped in to test code to give a better picture of what is being scanned in some of the complex test scenarios.
37ee70fa	2013-03-25T22:19:39	Implement GIT_STATUS_OPT_EXCLUDE_SUBMODULES This option has been sitting unimplemented for a while, so I finally went through and implemented it along with some tests. As part of this, I improved the implementation of GIT_DIFF_IGNORE_SUBMODULES so it be more diligent about avoiding extra work and about leaving off delta records for submodules to the greatest extent possible (though it may include them still if you are request TYPECHANGE records).
0c289dd7	2013-03-25T16:40:16	Recursing into ignored dirs for diff and status This implements working versions of GIT_DIFF_RECURSE_IGNORED_DIRS and GIT_STATUS_OPT_RECURSE_IGNORED_DIRS along with some tests for the newly available behaviors. This is not turned on by default for status, but can be accessed via the options to the extended version of the command.
79cfa20d	2012-11-29T20:12:59	Deploy GIT_STATUS_OPTIONS_INIT
02df42dd	2012-11-19T16:33:30	Set up default internal ignores This adds "." ".." and ".git" to the internal ignores list by default - asking about paths with these files will always say that they are ignored.
70d41f6b	2012-10-16T23:42:01	Fix -Wunused-but-set-variable warning
52032ae5	2012-10-15T12:48:43	Fix single-file ignore checks To answer if a single given file should be ignored, the path to that file has to be processed progressively checking that there are no intermediate ignored directories in getting to the file in question. This enables that, fixing the broken old behavior, and adds tests to exercise various ignore situations.
aa4437f6	2012-10-09T00:51:43	Fix compiler warnings * tests-clar/status: remove an unused variable * clone: fix -Wmaybe-uninitialized warning
edb456c3	2012-10-08T16:32:43	Fix a bug where ignorecase wasn't applied to ignores
11684104	2012-08-24T13:41:45	Fix crash with adding internal ignores Depending on what you had done before adding new items to the internal ignores list, it was possible for the cache of ignore data to be uninitialized.
2fb4e9b3	2012-08-22T11:42:00	Wrap up ignore API and add tests This fills out the ignore API and adds tests.
cfc17dc4	2012-06-09T17:43:18	Add a test showing that git_status_file gets confused by spaces in .gitignore
dc13f1f7	2012-05-10T11:08:59	Add cache busting to attribute cache This makes the git attributes and git ignores cache check stat information before using the file contents from the cache. For cached files from the index, it checks the SHA of the file instead. This should reduce the need to ever call `git_attr_cache_flush()` in most situations. This commit also fixes the `git_status_should_ignore` API to use the libgit2 standard parameter ordering.
f917481e	2012-05-03T16:37:25	Support reading attributes from index Depending on the operation, we need to consider gitattributes in both the work dir and the index. This adds a parameter to all of the gitattributes related functions that allows user control of attribute reading behavior (i.e. prefer workdir, prefer index, only use index). This fix also covers allowing us to check attributes (and hence do diff and status) on bare repositories. This was a somewhat larger change that I hoped because it had to change the cache key used for gitattributes files.
d58336dd	2012-04-26T10:51:45	Fix leading slash behavior in attrs/ignores We were not following the git behavior for leading slashes in path names when matching git ignores and git attribute file patterns. This should fix issue #638.
0d0fa7c3	2012-03-16T15:56:01	Convert attr, ignore, mwindow, status to new errors Also cleaned up some previously converted code that still had little things to polish.
854eccbb	2012-02-29T12:04:59	Clean up GIT_UNUSED macros on all platforms It turns out that commit 31e9cfc4cbcaf1b38cdd3dbe3282a8f57e5366a5 did not fix the GIT_USUSED behavior on all platforms. This commit walks through and really cleans things up more thoroughly, getting rid of the unnecessary stuff. To remove the use of some GIT_UNUSED, I ended up adding a couple of new iterators for hashtables that allow you to iterator just over keys or just over values. In making this change, I found a bug in the clar tests (where we were doing count++ but meant to do (count)++ to increment the value). I fixed that but then found the test failing because it was not really using an empty repo. So, I took some of the code that I wrote for iterator testing and moved it to clar_helpers.c, then made use of that to make it easier to open fixtures on a per test basis even within a single test file.
e8c96ed2	2012-02-01T12:30:35	Add unit tests for recent bug fixes Add unit tests to confirm ignore directory pattern matches and to confirm that ignore and attribute files are loaded properly into the attribute file cache.
3fd1520c	2012-01-24T20:35:15	Rename the Clay test suite to Clar Clay is the name of a programming language on the makings, and we want to avoid confusions. Sorry for the huge diff!

ba8b8c04

2013-08-07T09:17:20

Improve building ignore file lists The routines to push and pop ignore files while traversing a directory had some issues. In particular, setting up the initial list would sometimes push an ignore file before it ought to be applied if the starting path was a directory containing an ignore file. Also, the pop function was not always matching the right part of the path and would fail to pop ignores from the list in some cases. This adds some tests that exercise a particular problematic case and then fixes the problems that I could find related to this. At some point, I'd like to isolate this ignore rule management code and rewrite it, but that's a larger project and right now, I'll opt to just try to fix the broken behaviors.

33d532dc

2013-08-09T09:32:06

Merge pull request #1462 from yorah/fix/libgit2sharp-issue-379 status: fix handling of filenames with special prefixes

114f5a6c

2013-06-10T10:10:39

Reorganize diff and add basic diff driver This is a significant reorganization of the diff code to break it into a set of more clearly distinct files and to document the new organization. Hopefully this will make the diff code easier to understand and to extend. This adds a new `git_diff_driver` object that looks of diff driver information from the attributes and the config so that things like function content in diff headers can be provided. The full driver spec is not implemented in the commit - this is focused on the reorganization of the code and putting the driver hooks in place. This also removes a few #includes from src/repository.h that were overbroad, but as a result required extra #includes in a variety of places since including src/repository.h no longer results in pulling in the whole world.

2e40a60e

2013-04-11T17:29:05

status: fix handling of filenames with special prefixes Fix libgit2/libgit2sharp#379

ccfa6805

2013-03-25T23:58:40

Fix some diff ignores and submodule dirty workdir This started out trying to look at the problems from issue #1425 and gradually grew to a broader set of fixes. There are two core things fixed here: 1. When you had an ignore like "/bin" which is rooted at the top of your tree, instead of immediately adding the "bin/" entry as an ignored item in the diff, we were returning all of the direct descendants of the directory as ignored items. This changes things to immediately ignore the directory. Note that this effects the behavior in test_status_ignore__subdirectories so that we no longer exactly match core gits ignore behavior, but the new behavior probably makes more sense (i.e. we now will include an ignored directory inside an untracked directory that we previously would have left off). 2. When a submodule only contained working directory changes, the diff code was always considering it unmodified which was just an outright bug. The HEAD SHA of the submodule matches the SHA in the parent repo index, and since the SHAs matches, the diff code was overwriting the actual status with UNMODIFIED. These fixes broke existing tests test_diff_workdir__submodules and test_status_ignore__subdirectories but looking it over, I actually think the new results are correct and the old results were wrong. @nulltoken had actually commented on the subdirectory ignore issue previously. I also included in the tests some debugging versions of the shared iteration callback routines that print status or diff information. These aren't used actively in the tests, but can be quickly swapped in to test code to give a better picture of what is being scanned in some of the complex test scenarios.

37ee70fa

2013-03-25T22:19:39

Implement GIT_STATUS_OPT_EXCLUDE_SUBMODULES This option has been sitting unimplemented for a while, so I finally went through and implemented it along with some tests. As part of this, I improved the implementation of GIT_DIFF_IGNORE_SUBMODULES so it be more diligent about avoiding extra work and about leaving off delta records for submodules to the greatest extent possible (though it may include them still if you are request TYPECHANGE records).

0c289dd7

2013-03-25T16:40:16

Recursing into ignored dirs for diff and status This implements working versions of GIT_DIFF_RECURSE_IGNORED_DIRS and GIT_STATUS_OPT_RECURSE_IGNORED_DIRS along with some tests for the newly available behaviors. This is not turned on by default for status, but can be accessed via the options to the extended version of the command.

79cfa20d

2012-11-29T20:12:59

Deploy GIT_STATUS_OPTIONS_INIT

02df42dd

2012-11-19T16:33:30

Set up default internal ignores This adds "." ".." and ".git" to the internal ignores list by default - asking about paths with these files will always say that they are ignored.

70d41f6b

2012-10-16T23:42:01

Fix -Wunused-but-set-variable warning

52032ae5

2012-10-15T12:48:43

Fix single-file ignore checks To answer if a single given file should be ignored, the path to that file has to be processed progressively checking that there are no intermediate ignored directories in getting to the file in question. This enables that, fixing the broken old behavior, and adds tests to exercise various ignore situations.

aa4437f6

2012-10-09T00:51:43

Fix compiler warnings * tests-clar/status: remove an unused variable * clone: fix -Wmaybe-uninitialized warning

edb456c3

2012-10-08T16:32:43

Fix a bug where ignorecase wasn't applied to ignores

11684104

2012-08-24T13:41:45

Fix crash with adding internal ignores Depending on what you had done before adding new items to the internal ignores list, it was possible for the cache of ignore data to be uninitialized.

2fb4e9b3

2012-08-22T11:42:00

Wrap up ignore API and add tests This fills out the ignore API and adds tests.

cfc17dc4

2012-06-09T17:43:18

Add a test showing that git_status_file gets confused by spaces in .gitignore

dc13f1f7

2012-05-10T11:08:59

Add cache busting to attribute cache This makes the git attributes and git ignores cache check stat information before using the file contents from the cache. For cached files from the index, it checks the SHA of the file instead. This should reduce the need to ever call `git_attr_cache_flush()` in most situations. This commit also fixes the `git_status_should_ignore` API to use the libgit2 standard parameter ordering.

f917481e

2012-05-03T16:37:25

Support reading attributes from index Depending on the operation, we need to consider gitattributes in both the work dir and the index. This adds a parameter to all of the gitattributes related functions that allows user control of attribute reading behavior (i.e. prefer workdir, prefer index, only use index). This fix also covers allowing us to check attributes (and hence do diff and status) on bare repositories. This was a somewhat larger change that I hoped because it had to change the cache key used for gitattributes files.

d58336dd

2012-04-26T10:51:45

Fix leading slash behavior in attrs/ignores We were not following the git behavior for leading slashes in path names when matching git ignores and git attribute file patterns. This should fix issue #638.

0d0fa7c3

2012-03-16T15:56:01

Convert attr, ignore, mwindow, status to new errors Also cleaned up some previously converted code that still had little things to polish.

854eccbb

2012-02-29T12:04:59

Clean up GIT_UNUSED macros on all platforms It turns out that commit 31e9cfc4cbcaf1b38cdd3dbe3282a8f57e5366a5 did not fix the GIT_USUSED behavior on all platforms. This commit walks through and really cleans things up more thoroughly, getting rid of the unnecessary stuff. To remove the use of some GIT_UNUSED, I ended up adding a couple of new iterators for hashtables that allow you to iterator just over keys or just over values. In making this change, I found a bug in the clar tests (where we were doing *count++ but meant to do (*count)++ to increment the value). I fixed that but then found the test failing because it was not really using an empty repo. So, I took some of the code that I wrote for iterator testing and moved it to clar_helpers.c, then made use of that to make it easier to open fixtures on a per test basis even within a single test file.

e8c96ed2

2012-02-01T12:30:35

Add unit tests for recent bug fixes Add unit tests to confirm ignore directory pattern matches and to confirm that ignore and attribute files are loaded properly into the attribute file cache.

3fd1520c

2012-01-24T20:35:15

Rename the Clay test suite to Clar Clay is the name of a programming language on the makings, and we want to avoid confusions. Sorry for the huge diff!

thodg/libgit2/tests-clar/status/ignore.c

tests-clar/status/ignore.c

Log