|
8ff0f325
|
2012-10-31T22:26:57
|
|
index: Switch to git_futils_filestamp
|
|
f45ec1a0
|
2012-10-29T20:04:21
|
|
index refactoring
|
|
ec40b7f9
|
2012-09-17T15:42:41
|
|
Support for core.ignorecase
|
|
da825c92
|
2012-06-19T14:27:02
|
|
Make index add/append support core.filemode flag
This fixes git_index_add and git_index_append to behave more like
core git, preserving old filemode data in the index when adding
and/or appending with core.filemode = false.
This also has placeholder support for core.symlinks and
core.ignorecase, but those flags are not implemented (well,
symlinks has partial support for preserving mode information in
the same way that git does, but it isn't tested).
|
|
|
41a82592
|
2012-05-15T14:17:39
|
|
Ranged iterators and rewritten git_status_file
The goal of this work is to rewrite git_status_file to use the
same underlying code as git_status_foreach.
This is done in 3 phases:
1. Extend iterators to allow ranged iteration with start and
end prefixes for the range of file names to be covered.
2. Improve diff so that when there is a pathspec and there is
a common non-wildcard prefix of the pathspec, it will use
ranged iterators to minimize excess iteration.
3. Rewrite git_status_file to call git_status_foreach_ext
with a pathspec that covers just the one file being checked.
Since ranged iterators underlie the status & diff implementation,
this is actually fairly efficient. The workdir iterator does
end up loading the contents of all the directories down to the
single file, which should ideally be avoided, but it is pretty
good.
|
|
7c7ff7d1
|
2012-03-19T16:10:11
|
|
Migrate index, oid, and utils to new errors
This includes a few cleanups that came up while converting
these files.
This commit introduces a could new git error classes, including
the catchall class: GITERR_INVALID which I'm using as the class
for invalid and out of range values which are detected at too low
a level of library to use a higher level classification. For
example, an overflow error in parsing an integer or a bad letter
in parsing an OID string would generate an error in this class.
|
|
5e0de328
|
2012-02-13T17:10:24
|
|
Update Copyright header
Signed-off-by: schu <schu-github@schulog.org>
|
|
|
9462c471
|
2011-11-25T08:16:26
|
|
repository: Change ownership semantics
The ownership semantics have been changed all over the library to be
consistent. There are no more "borrowed" or duplicated references.
Main changes:
- `git_repository_open2` and `3` have been dropped.
- Added setters and getters to hotswap all the repository owned
objects:
`git_repository_index`
`git_repository_set_index`
`git_repository_odb`
`git_repository_set_odb`
`git_repository_config`
`git_repository_set_config`
`git_repository_workdir`
`git_repository_set_workdir`
Now working directories/index files/ODBs and so on can be
hot-swapped after creating a repository and between operations.
- All these objects now have proper ownership semantics with
refcounting: they all require freeing after they are no longer
needed (the repository always keeps its internal reference).
- Repository open and initialization has been updated to keep in
mind the configuration files. Bare repositories are now always
detected, and a default config file is created on init.
- All the tests affected by these changes have been dropped from the
old test suite and ported to the new one.
|
|
01ad7b3a
|
2011-09-06T15:48:45
|
|
*: correct and codify various file permissions
The following files now have 0444 permissions:
- loose objects
- pack indexes
- pack files
- packs downloaded by fetch
- packs downloaded by the HTTP transport
And the following files now have 0666 permissions:
- config files
- repository indexes
- reflogs
- refs
This brings libgit2 more in line with Git.
Note that git_filebuf_commit() and git_filebuf_commit_at() have both
gained a new mode parameter.
The latter change fixes an important issue where filebufs created with
GIT_FILEBUF_TEMPORARY received 0600 permissions (due to mkstemp(3)
usage). Now we chmod() the file before renaming it into place.
Tests have been added to confirm that new commit, tag, and tree
objects are created with the right permissions. I don't have access to
Windows, so for now I've guarded the tests with "#ifndef GIT_WIN32".
|
|
b4171320
|
2011-07-26T11:34:54
|
|
Move the tree cache functions to their own file
Rename git_index_tree to git_tree_cache.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
|
|
|
bb742ede
|
2011-09-19T01:54:32
|
|
Cleanup legal data
1. The license header is technically not valid if it doesn't have a
copyright signature.
2. The COPYING file has been updated with the different licenses used in
the project.
3. The full GPLv2 header in each file annoys me.
|
|
4c0b6a6d
|
2011-04-21T10:54:54
|
|
index: Add API for unmerged entries
New external functions:
- git_index_unmerged_entrycount: Counts the unmerged entries in
the index
- git_index_get_unmerged: Gets an unmerged entry from the index
by name
New internal functions:
- read_unmerged: Wrapper for read_unmerged_internal
- read_unmerged_internal: Reads unmerged entries from the index
if the index has the INDEX_EXT_UNMERGED_SIG set
- unmerged_srch: Search function for unmerged vector
- unmerged_cmp: Compare function for unmerged vector
New data structures:
- git_index now contains a git_vector unmerged that stores
unmerged entries
- git_index_entry_unmerged: Representation of an unmerged file
entry. It represents all three versions of the file at the
same time, with one name, three modes and three OIDs
|
|
|
86d7e1ca
|
2011-02-28T12:46:13
|
|
Fix searching in git_vector
We now store only one sorting callback that does entry comparison. This
is used when sorting the entries using a quicksort, and when looking for
a specific entry with the new search methods.
The following search methods now exist:
git_vector_search(vector, entry)
git_vector_search2(vector, custom_search_callback, key)
git_vector_bsearch(vector, entry)
git_vector_bsearch2(vector, custom_search_callback, key)
The sorting state of the vector is now stored internally.
Signed-off-by: Vicent Marti <tanoku@gmail.com>
|
|
|
817c2820
|
2011-02-21T17:05:16
|
|
Rewrite all file IO for more performance
The new `git_filebuf` structure provides atomic high-performance writes
to disk by using a write cache, and optionally a double-buffered scheme
through a worker thread (not enabled yet).
Writes can be done 3-layered, like in git.git (user code -> write cache
-> disk), or 2-layered, by writing directly on the cache. This makes
index writing considerably faster.
The `git_filebuf` structure contains all the old functionality of
`git_filelock` for atomic file writes and reads. The `git_filelock`
structure has been removed.
Additionally, the `git_filebuf` API allows to automatically hash (SHA1)
all the data as it is written to disk (hashing is done smartly on big
chunks to improve performance).
Signed-off-by: Vicent Marti <tanoku@gmail.com>
|
|
|
348c7335
|
2011-02-17T21:32:00
|
|
Improve the performance when writing Index files
In response to issue #60 (git_index_write really slow), the write_index
function has been rewritten to improve its performance -- it should now
be in par with the performance of git.git.
On top of that, if Posix Threads are available when compiling libgit2, a
new threaded writing system will be used (3 separate threads take care
of solving byte-endianness, hashing the contents of the index and
writing to disk, respectively). For very long Index files, this method
is up to 3x times faster than git.git.
Signed-off-by: Vicent Marti <tanoku@gmail.com>
|
|
|
44908fe7
|
2010-12-06T23:03:16
|
|
Change the library include file
Libgit2 is now officially include as
#include "<git2.h>"
or indidividual files may be included as
#include <git2/index.h>
Signed-off-by: Vicent Marti <tanoku@gmail.com>
|
|
|
c4034e63
|
2010-12-02T04:31:54
|
|
Refactor all 'vector' functions into common code
All the operations on the 'git_index_entry' array and the
'git_tree_entry' array have been refactored into common code in the
src/vector.c file.
The new vector methods support:
- insertion: O(1) (avg)
- deletion: O(n)
- searching: O(logn)
- sorting: O(logn)
- r. access: O(1)
Signed-off-by: Vicent Marti <tanoku@gmail.com>
|
|
|
8c1f9e4d
|
2010-11-29T18:07:17
|
|
Make the bitmasks for Index Entry flags public
Signed-off-by: Vicent Marti <tanoku@gmail.com>
|
|
|
c3a20d5c
|
2010-11-14T22:11:46
|
|
Add support for 'index add'
Actually add files to the index by creating their corresponding blob and
storing it on the repository, then getting the hash and updating the
index file.
Signed-off-by: Vicent Marti <tanoku@gmail.com>
|
|
|
6fd195d7
|
2010-11-02T18:42:42
|
|
Change git_repository initialization to use a path
The constructor to git_repository is now called
'git_repository_open(path)'
and takes a path to a git repository instead of an existing ODB object.
Unit tests have been updated accordingly and the two test repositories
have been merged into one.
Signed-off-by: Vicent Marti <tanoku@gmail.com>
|
|
|
68535125
|
2010-07-09T20:19:56
|
|
Add support for git index files
The new 'git_index' structure is an in-memory representation
of a git index on disk; the 'git_index_entry' structures represent
each one of the file entries on the index.
The following calls for index instantiation have been added:
git_index_alloc(): instantiate a new index structure
git_index_free(): free an existing index
git_index_clear(): clear all the entires in an existing file
The following calls for index reading and writing have been added:
git_index_read(): update the contents of the index structure from
its file on disk.
Internally implemented through:
git_index__parse()
Index files are stored on disk in network byte order; all integer fields
inside them are properly converted to the machine's byte order when
loading them in memory. The parsing engine also distinguishes
between normal index entries and extended entries with 2 extra bytes
of flags.
The 'TREE' extension for index entries is also loaded into memory:
Tree caches stored in Index files are loaded into the
'git_index_tree' structure pointed by the 'tree' pointer inside
'git_index'.
'index->tree' points to the root node of the tree cache; the full tree
can be traversed through each of the node's 'tree->children'.
Index files can be written back to disk through:
git_index_write(): atomic writing of existing index objects
backed by internal method git_index__write()
The following calls for entry manipulation have been added:
git_index_add(): insert an empty entry to the index
git_index_find(): search an entry by its path name
git_index__append(): appends a new index entry to the end of the
list, resizing the entries array if required
New index entries are always inserted at the end of the array; since the
index entries must be sorted for it to be internally consistent, the
index object is only sorted once, and if required, before accessing the
whole entriea array (e.g. before writing to disk, before traversing,
etc).
git_index__remove_pos(): remove an index entry in a specific position
git_index__sort(): sort the entries in the array by path name
The entries array is sorted stably and in place using an
insertion sort, which ought to be the most efficient approach
since the entries array is always mostly-sorted.
Signed-off-by: Vicent Marti <tanoku@gmail.com>
|