kmx git

Commit	Date	Message
2a485dab	2017-04-04T18:55:57	refs: update worktree HEADs when renaming branches Whenever we rename a branch, we update the repository's symbolic HEAD reference if it currently points to the branch that is to be renamed. But with the introduction of worktrees, we also have to iterate over all HEADs of linked worktrees to adjust them. Do so.
60297256	2017-04-04T16:12:27	tests: worktree::refs: convert spaces to tabs
b0c9bc92	2017-03-15T13:38:54	submodule: resolve URLs relative to main worktree It is possible to specify submodule URLs relative to the repository location. E.g. having a submodule with URL "../submodule" will look for the submodule at "repo/../submodule". With the introduction of worktrees, though, we cannot simply resolve the URL relative to the repository location itself. If the repository for which a URL is to be resolved is a working tree, we have to resolve the URL relative to the parent's repository path. Otherwise, the URL would change depending on where the working tree is located. Fix this by special-casing when we have a working tree while getting the URL base.
097f0105	2017-03-17T08:54:53	refdb: create references in commondir References for a repository are usually created inside of its gitdir. When using worktrees, though, these references are not to be created inside the worktree gitdir, but instead inside the gitdir of its parent repository, which is the commondir. Like this, branches will still be available after the worktree itself has been deleted. The filesystem refdb currently still creates new references inside of the gitdir. Fix this and have it create references in commondir.
8f154be3	2017-03-17T08:13:59	worktree: write resolved paths into link files The three link files "worktree/.git", ".git/worktrees/<name>/commondir" and ".git/worktrees/<name>/gitdir" should always contain absolute and resolved paths. Adjust the logic creating new worktrees to first use `git_path_prettify_dir` before writing out these files, so that paths are resolved first.
20a368e2	2017-03-15T15:29:29	worktree: parent path should point to the working dir The working tree's parent path should not point to the parent's gitdir, but to the parent's working directory. Pointing to the gitdir would not make any sense, as the parent's working directory is actually equal to both repository's common directory. Fix the issue.
3017ba94	2017-03-15T14:24:25	worktree: implement `git_worktree_open_from_repository` While we already provide functionality to look up a worktree from a repository, we cannot do so the other way round. That is given a repository, we want to look up its worktree if it actually exists. Getting the worktree of a repository is useful when we want to get certain meta information like the parent's location, getting the locked status, etc.
f3c30686	2017-03-15T15:04:24	tests: worktree: use joinpath instead of printf to join paths
fdb3e24a	2017-03-15T14:23:59	tests: worktree: unify init/cleanup in open tests
548e5bdf	2017-03-15T12:28:05	tests: worktree: unify init/cleanup in submodule tests
aa593a65	2017-03-15T12:01:02	tests: worktree: move submodule tests into own suite
3f3a4ce7	2016-11-09T14:18:22	worktree: test opening worktree via gitlink, gitdir and worktree
6f6dd17c	2016-11-08T12:13:59	worktree: test creating and opening submodule worktrees
1fd6e035	2016-11-07T10:23:34	worktree: test opening discovered submodule worktrees
39abd3ad	2016-11-04T13:39:54	worktree: compute workdir for worktrees opened via their gitdir When opening a worktree via the gitdir of its parent repository we fail to correctly set up the worktree's working directory. The problem here is two-fold: we first fail to see that the gitdir actually is a gitdir of a working tree and then subsequently fail to determine the working tree location from the gitdir. The first problem of not noticing a gitdir belongs to a worktree can be solved by checking for the existence of a `gitdir` file in the gitdir. This file points back to the gitlink file located in the working tree's working directory. As this file only exists for worktrees, it should be sufficient indication of the gitdir belonging to a worktree. The second problem, that is determining the location of the worktree's working directory, can then be solved by reading the `gitdir` file in the working directory's gitdir. When we now resolve relative paths and strip the final `.git` component, we have the actual worktree's working directory location.
84f56cb0	2016-11-04T11:59:52	repository: rename `path_repository` and `path_gitlink` The `path_repository` variable is actually confusing to think about, as it is not always clear what the repository actually is. It may either be the path to the folder containing worktree and .git directory, the path to .git itself, a worktree or something entirely different. Actually, the intent of the variable is to hold the path to the gitdir, which is either the .git directory or the bare repository. Rename the variable to `gitdir` to avoid confusion. While at it, also rename `path_gitlink` to `gitlink` to improve consistency.
384518d0	2015-10-27T14:17:52	repository: restrict checking out checked out branches If a branch is already checked out in a working tree we are not allowed to check out that branch in another repository. Introduce this restriction when setting a repository's HEAD.
143e539f	2015-11-06T12:33:59	branch: restrict branch deletion for worktrees Restrict the ability to delete branches that are checked out in any linked repository.
4321595d	2015-11-10T16:54:48	worktree: test basic merge functionality
04fb12ab	2015-10-27T12:37:51	worktree: implement functions reading HEAD Implement `git_repository_head_for_worktree` and `git_repository_head_detached_for_worktree` for directly accessing a worktree's HEAD without opening it as a `git_repository` first.
f0cfc341	2015-10-21T13:53:18	worktree: implement `git_worktree_prune` Implement the `git_worktree_prune` function. This function can be used to delete working trees from a repository. According to the flags passed to it, it can either delete the working tree's gitdir only or both gitdir and the working directory.
2a503485	2015-10-21T16:03:04	worktree: implement locking mechanisms Working trees support locking by creating a file `locked` inside the tree's gitdir with an optional reason inside. Support this feature by adding functions to get and set the locking status.
dea7488e	2015-10-23T14:11:44	worktree: implement `git_worktree_add` Implement the `git_worktree_add` function which can be used to create new working trees for a given repository.
372dc9ff	2015-10-21T13:49:55	worktree: implement `git_worktree_validate` Add a new function that checks wether a given `struct git_worktree` is valid. The validation includes checking if the gitdir, parent directory and common directory are present.
8c8d726e	2015-10-21T12:10:30	worktree: implement `git_repository_open_from_worktree` Add function `git_repository_open_from_worktree`, which allows to open a `git_worktree` as repository.
d3bc09e8	2015-10-21T12:02:31	worktree: introduce `struct git_worktree` Introduce a new `struct git_worktree`, which holds information about a possible working tree connected to a repository. Introduce functions to allow opening working trees for a repository.
45f2b7a4	2015-10-21T11:48:02	worktree: implement `git_worktree_list` Add new module for working trees with the `git_worktree_list` function. The function lists names for all working trees of a certain repository.
4292837d	2015-09-24T14:37:10	config: open configuration in commondir A repository's configuartion file can always be found in the GIT_COMMON_DIR, which has been newly introduced. For normal repositories this does change nothing, but for working trees this change allows to access the shared configuration file.
e9403024	2015-09-24T15:32:26	refdb: look for reflog in commondir
e0a6c28e	2015-09-16T16:09:24	refdb: introduce commondir awareness The refdb_fs_backend is not aware of the git commondir, which stores common objects like the o bject database and packed/loose refereensces when worktrees are used. Make refdb_fs_backend aware of the common directory by introducing a new commonpath variable that points to the actual common path of the database and using it instead of the gitdir for the mentioned objects.
79ab3ef6	2015-10-15T15:58:05	repository: introduce is_worktree variable
c09fd54e	2015-09-16T12:10:11	repository: introduce commondir variable The commondir variable stores the path to the common directory. The common directory is used to store objects and references shared across multiple repositories. A current use case is the newly introduced `git worktree` feature, which sets up a separate working copy, where the backing git object store and references are pointed to by the common directory.
807d57e7	2015-11-11T10:54:41	tests: implement worktree helpers

2a485dab

2017-04-04T18:55:57

refs: update worktree HEADs when renaming branches Whenever we rename a branch, we update the repository's symbolic HEAD reference if it currently points to the branch that is to be renamed. But with the introduction of worktrees, we also have to iterate over all HEADs of linked worktrees to adjust them. Do so.

60297256

2017-04-04T16:12:27

tests: worktree::refs: convert spaces to tabs

b0c9bc92

2017-03-15T13:38:54

submodule: resolve URLs relative to main worktree It is possible to specify submodule URLs relative to the repository location. E.g. having a submodule with URL "../submodule" will look for the submodule at "repo/../submodule". With the introduction of worktrees, though, we cannot simply resolve the URL relative to the repository location itself. If the repository for which a URL is to be resolved is a working tree, we have to resolve the URL relative to the parent's repository path. Otherwise, the URL would change depending on where the working tree is located. Fix this by special-casing when we have a working tree while getting the URL base.

097f0105

2017-03-17T08:54:53

refdb: create references in commondir References for a repository are usually created inside of its gitdir. When using worktrees, though, these references are not to be created inside the worktree gitdir, but instead inside the gitdir of its parent repository, which is the commondir. Like this, branches will still be available after the worktree itself has been deleted. The filesystem refdb currently still creates new references inside of the gitdir. Fix this and have it create references in commondir.

8f154be3

2017-03-17T08:13:59

worktree: write resolved paths into link files The three link files "worktree/.git", ".git/worktrees/<name>/commondir" and ".git/worktrees/<name>/gitdir" should always contain absolute and resolved paths. Adjust the logic creating new worktrees to first use `git_path_prettify_dir` before writing out these files, so that paths are resolved first.

20a368e2

2017-03-15T15:29:29

worktree: parent path should point to the working dir The working tree's parent path should not point to the parent's gitdir, but to the parent's working directory. Pointing to the gitdir would not make any sense, as the parent's working directory is actually equal to both repository's common directory. Fix the issue.

3017ba94

2017-03-15T14:24:25

worktree: implement `git_worktree_open_from_repository` While we already provide functionality to look up a worktree from a repository, we cannot do so the other way round. That is given a repository, we want to look up its worktree if it actually exists. Getting the worktree of a repository is useful when we want to get certain meta information like the parent's location, getting the locked status, etc.

f3c30686

2017-03-15T15:04:24

tests: worktree: use joinpath instead of printf to join paths

fdb3e24a

2017-03-15T14:23:59

tests: worktree: unify init/cleanup in open tests

548e5bdf

2017-03-15T12:28:05

tests: worktree: unify init/cleanup in submodule tests

aa593a65

2017-03-15T12:01:02

tests: worktree: move submodule tests into own suite

3f3a4ce7

2016-11-09T14:18:22

worktree: test opening worktree via gitlink, gitdir and worktree

6f6dd17c

2016-11-08T12:13:59

worktree: test creating and opening submodule worktrees

1fd6e035

2016-11-07T10:23:34

worktree: test opening discovered submodule worktrees

39abd3ad

2016-11-04T13:39:54

worktree: compute workdir for worktrees opened via their gitdir When opening a worktree via the gitdir of its parent repository we fail to correctly set up the worktree's working directory. The problem here is two-fold: we first fail to see that the gitdir actually is a gitdir of a working tree and then subsequently fail to determine the working tree location from the gitdir. The first problem of not noticing a gitdir belongs to a worktree can be solved by checking for the existence of a `gitdir` file in the gitdir. This file points back to the gitlink file located in the working tree's working directory. As this file only exists for worktrees, it should be sufficient indication of the gitdir belonging to a worktree. The second problem, that is determining the location of the worktree's working directory, can then be solved by reading the `gitdir` file in the working directory's gitdir. When we now resolve relative paths and strip the final `.git` component, we have the actual worktree's working directory location.

84f56cb0

2016-11-04T11:59:52

repository: rename `path_repository` and `path_gitlink` The `path_repository` variable is actually confusing to think about, as it is not always clear what the repository actually is. It may either be the path to the folder containing worktree and .git directory, the path to .git itself, a worktree or something entirely different. Actually, the intent of the variable is to hold the path to the gitdir, which is either the .git directory or the bare repository. Rename the variable to `gitdir` to avoid confusion. While at it, also rename `path_gitlink` to `gitlink` to improve consistency.

384518d0

2015-10-27T14:17:52

repository: restrict checking out checked out branches If a branch is already checked out in a working tree we are not allowed to check out that branch in another repository. Introduce this restriction when setting a repository's HEAD.

143e539f

2015-11-06T12:33:59

branch: restrict branch deletion for worktrees Restrict the ability to delete branches that are checked out in any linked repository.

4321595d

2015-11-10T16:54:48

worktree: test basic merge functionality

04fb12ab

2015-10-27T12:37:51

worktree: implement functions reading HEAD Implement `git_repository_head_for_worktree` and `git_repository_head_detached_for_worktree` for directly accessing a worktree's HEAD without opening it as a `git_repository` first.

f0cfc341

2015-10-21T13:53:18

worktree: implement `git_worktree_prune` Implement the `git_worktree_prune` function. This function can be used to delete working trees from a repository. According to the flags passed to it, it can either delete the working tree's gitdir only or both gitdir and the working directory.

2a503485

2015-10-21T16:03:04

worktree: implement locking mechanisms Working trees support locking by creating a file `locked` inside the tree's gitdir with an optional reason inside. Support this feature by adding functions to get and set the locking status.

dea7488e

2015-10-23T14:11:44

worktree: implement `git_worktree_add` Implement the `git_worktree_add` function which can be used to create new working trees for a given repository.

372dc9ff

2015-10-21T13:49:55

worktree: implement `git_worktree_validate` Add a new function that checks wether a given `struct git_worktree` is valid. The validation includes checking if the gitdir, parent directory and common directory are present.

8c8d726e

2015-10-21T12:10:30

worktree: implement `git_repository_open_from_worktree` Add function `git_repository_open_from_worktree`, which allows to open a `git_worktree` as repository.

d3bc09e8

2015-10-21T12:02:31

worktree: introduce `struct git_worktree` Introduce a new `struct git_worktree`, which holds information about a possible working tree connected to a repository. Introduce functions to allow opening working trees for a repository.

45f2b7a4

2015-10-21T11:48:02

worktree: implement `git_worktree_list` Add new module for working trees with the `git_worktree_list` function. The function lists names for all working trees of a certain repository.

4292837d

2015-09-24T14:37:10

config: open configuration in commondir A repository's configuartion file can always be found in the GIT_COMMON_DIR, which has been newly introduced. For normal repositories this does change nothing, but for working trees this change allows to access the shared configuration file.

e9403024

2015-09-24T15:32:26

refdb: look for reflog in commondir

e0a6c28e

2015-09-16T16:09:24

refdb: introduce commondir awareness The refdb_fs_backend is not aware of the git commondir, which stores common objects like the o bject database and packed/loose refereensces when worktrees are used. Make refdb_fs_backend aware of the common directory by introducing a new commonpath variable that points to the actual common path of the database and using it instead of the gitdir for the mentioned objects.

79ab3ef6

2015-10-15T15:58:05

repository: introduce is_worktree variable

c09fd54e

2015-09-16T12:10:11

repository: introduce commondir variable The commondir variable stores the path to the common directory. The common directory is used to store objects and references shared across multiple repositories. A current use case is the newly introduced `git worktree` feature, which sets up a separate working copy, where the backing git object store and references are pointed to by the common directory.

807d57e7

2015-11-11T10:54:41

tests: implement worktree helpers

thodg/libgit2/tests/worktree

tests/worktree

Log