|
3d23b74a
|
2011-03-29T13:50:37
|
|
Free the config var hash contents in git_config_free
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
|
|
|
238df559
|
2011-03-29T12:29:21
|
|
Rename git_config_{type,var} to git_cvar{_type,}
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
|
|
|
05314b5b
|
2011-03-29T12:25:46
|
|
Make GIT_EINVALIDTYPE available for use in config
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
|
|
|
9f7f4122
|
2011-03-29T12:19:53
|
|
Don't leak if config parsing fails
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
|
|
|
4e02504f
|
2011-03-29T12:10:30
|
|
Move config to support the new hash code
The hashes have been copied from the references code
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
|
|
|
3b4835c2
|
2011-03-28T18:07:22
|
|
Correctly parse the section header
If cfg_readline consumes the line, then parse_section_header will read
past it and if we read a character, parse_variable won't have the full
name.
This solution is a bit hackish, but it's the simplest way to get the
code to parse correctly.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
|
|
|
908afb77
|
2011-03-28T17:53:04
|
|
parse_section_header: save the name where it belongs
Save the location of the name in section_out instead of returning it
as an int. Use the return code to signal success or failure.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
|
|
|
e4c796f1
|
2011-03-28T17:51:18
|
|
Read and parse the confguration when openingt the config file
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
|
|
|
a69053c7
|
2011-03-28T17:12:53
|
|
Convert config.c to LF
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
|
|
|
5d4cd003
|
2011-03-28T17:02:45
|
|
Move the struct declaration outside config.c
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
|
|
a3002d56
|
2011-01-29T01:58:55
|
|
First version - WIP
Signed-off-by: Vicent Marti <tanoku@gmail.com>
|
|
|
86627121
|
2011-03-06T00:03:31
|
|
Fix type-conversion warning in MSVC
Signed-off-by: Vicent Marti <tanoku@gmail.com>
|
|
|
d6b5f5cc
|
2011-03-05T23:54:49
|
|
Add `git_oid_shorten`
Set of methods to find the minimal-length to uniquely identify every OID
in a list.
Includes stress test.
Signed-off-by: Vicent Marti <tanoku@gmail.com>
|
|
|
55ffebe3
|
2011-03-05T14:34:32
|
|
Fix creation of deeply-rooted references
Use a new `gitfo_creat_force` that will create the full path to a file
before creating it.
Signed-off-by: Vicent Marti <tanoku@gmail.com>
|
|
|
246eba80
|
2011-03-05T13:58:47
|
|
Use memmove() in git__dirname and git__basename
We cannot make sure that the user doesn't use the same buffer as source
and destination, so write to it using memmove.
Signed-off-by: Vicent Marti <tanoku@gmail.com>
|
|
|
60cb1d10
|
2011-03-05T13:56:14
|
|
Use memmove() in git__joinpath for overlapping copies
Signed-off-by: Vicent Marti <tanoku@gmail.com>
|
|
|
545a6915
|
2011-03-05T13:45:05
|
|
Change interface for Tree Index attr (always unsigned)
Signed-off-by: Vicent Marti <tanoku@gmail.com>
|
|
9de27ad0
|
2011-02-25T19:05:29
|
|
Check for valid range of attributes for tree entry
|
|
|
3490188b
|
2011-03-05T13:29:50
|
|
Change the return type of `git_blob_rawcontent`
Should return `void *` for raw bytes.
Signed-off-by: Vicent Marti <tanoku@gmail.com>
|
|
|
e0011be3
|
2011-03-05T13:22:16
|
|
Fix the opening of empty repositories
We were checking for the index file, which is not assured to exist on
clean git repositories.
Signed-off-by: Vicent Marti <tanoku@gmail.com>
|
|
|
f335b42c
|
2011-03-05T01:17:59
|
|
Fix segmentation fault when freeing a repository
Disable garbage collection of cross-references to prevent
double-freeing. Internal reference management is now done
with a separate method.
Signed-off-by: Vicent Marti <tanoku@gmail.com>
|
|
|
e06dd9b6
|
2011-03-04T15:23:52
|
|
Fix 'possibly uninitialized variable' warning
|
|
|
f7fcb0dd
|
2011-03-04T15:10:16
|
|
Don't use non-int bit fields
They are not standard. MSVC complains about them. And that's not good.
Signed-off-by: Vicent Marti <tanoku@gmail.com>
|
|
|
3c41c635
|
2011-03-03T21:58:37
|
|
Fix compilation in MSVC
MSVC cannot substract void pointers. Go figure.
Signed-off-by: Vicent Marti <tanoku@gmail.com>
|
|
|
71d33382
|
2011-03-03T20:20:45
|
|
Move the external includes folder from `src` to `include`
Signed-off-by: Vicent Marti <tanoku@gmail.com>
|
|
|
584f49a5
|
2011-03-01T01:37:28
|
|
Fix several issues with refcounting
- Added several missing reference increases
- Add new destructor to the repository that does not GC the objects
Signed-off-by: Vicent Marti <tanoku@gmail.com>
|
|
|
86d7e1ca
|
2011-02-28T12:46:13
|
|
Fix searching in git_vector
We now store only one sorting callback that does entry comparison. This
is used when sorting the entries using a quicksort, and when looking for
a specific entry with the new search methods.
The following search methods now exist:
git_vector_search(vector, entry)
git_vector_search2(vector, custom_search_callback, key)
git_vector_bsearch(vector, entry)
git_vector_bsearch2(vector, custom_search_callback, key)
The sorting state of the vector is now stored internally.
Signed-off-by: Vicent Marti <tanoku@gmail.com>
|
|
|
5de079b8
|
2011-02-28T12:12:26
|
|
Change the object creation/lookup API
The methods previously known as
git_repository_lookup
git_repository_newobject
git_repository_lookup_ref
are now part of their respective namespaces:
git_object_lookup
git_object_new
git_reference_lookup
This makes the API more consistent with the new references API.
Signed-off-by: Vicent Marti <tanoku@gmail.com>
|
|
5ad0351d
|
2011-03-03T19:58:07
|
|
Fix reference removal: remove packed refs together with loose ones
|
|
|
8f90ced5
|
2011-03-03T19:55:48
|
|
Fix corner case in reference renaming
Renaming a packed reference should not pack another reference
which happens to be in both loose and pack state.
|
|
|
971c90be
|
2011-02-28T16:54:13
|
|
Do not free the index if it's owned by a repository
Signed-off-by: Vicent Marti <tanoku@gmail.com>
|
|
|
48c27f86
|
2011-02-28T16:51:17
|
|
Implement reference counting for git_objects
All `git_object` instances looked up from the repository are reference
counted. User is expected to use the new `git_object_close` when an
object is no longer needed to force freeing it.
Signed-off-by: Vicent Marti <tanoku@gmail.com>
|
|
|
19a30a3f
|
2011-03-03T19:53:17
|
|
Add new move function, `gitfo_mv_force`
Forces a move by creating the folder for the destination file, if it
doesn't exist.
Signed-off-by: Vicent Marti <tanoku@gmail.com>
|
|
|
129007b4
|
2011-03-03T19:43:11
|
|
Fix refs renaming to prevent renaming with an invalid name
|
|
|
e2d42622
|
2011-03-03T19:41:27
|
|
Fix reference renaming to prevent duplicated names
|
|
|
76f7cf70
|
2011-03-03T19:38:54
|
|
Fix reference renaming implementation to match standard git behavior
|
|
|
669db21b
|
2011-02-28T22:21:18
|
|
Slightly changed the behavior of git__joinpath() and git__joinpath_n().
|
|
|
0594e3ef
|
2011-03-03T19:36:54
|
|
Prevent _dirent_loose_load() from choking on empty folders
|
|
|
d2d6912e
|
2011-02-26T13:56:16
|
|
Refactored the opening and the initialization of a repository.
|
|
|
87d3acf4
|
2011-02-27T22:31:43
|
|
Finish the References API
The following methods have been implemented:
git_reference_packall
git_reference_rename
git_reference_delete
The library now has full support for packed references, including
partial and total writing. Internal documentation has been updated with
the details.
Signed-off-by: Vicent Marti <tanoku@gmail.com>
|
|
|
17cdf252
|
2011-02-27T22:31:06
|
|
Make some Object methods take a const parameter
Signed-off-by: Vicent Marti <tanoku@gmail.com>
|
|
|
2e60b652
|
2011-02-27T22:30:28
|
|
Add extra methods to the new Hashtable implementation
Signed-off-by: Vicent Marti <tanoku@gmail.com>
|
|
|
ccef1c9d
|
2011-02-27T22:09:36
|
|
Move the path comparison method to fileops.c
Signed-off-by: Vicent Marti <tanoku@gmail.com>
|
|
|
86194b24
|
2011-02-18T21:57:53
|
|
Split packed from unpacked references
These two reference types are now stored separately to eventually allow
the removal/renaming of loose references and rewriting of the refs
packfile.
Signed-off-by: Vicent Marti <tanoku@gmail.com>
|
|
|
32054c24
|
2011-02-18T18:09:19
|
|
Brush up the refs API
Changed some more API details and updated documentation.
Sketched API for addition/removal of entries.
Signed-off-by: Vicent Marti <tanoku@gmail.com>
|
|
|
1d8cc731
|
2011-02-14T22:29:22
|
|
Refactored the reference creation API.
|
|
|
da7c3c71
|
2011-02-27T22:07:39
|
|
Fix warnings in vector.c
Signed-off-by: Vicent Marti <tanoku@gmail.com>
|
|
|
e1be1028
|
2011-02-13T20:18:35
|
|
Added some more tests to ensure the correct behavior of git_reference__normalize_name().
|
|
|
6a0895ad
|
2011-02-11T13:58:40
|
|
Added GIT_EINVALIDREFSTATE error.
|
|
|
aa2120e9
|
2011-02-10T15:08:00
|
|
Added git_reference__normalize_name() along with tests.
|
|
|
5cfd9ce4
|
2011-03-01T22:15:20
|
|
Add missing include to odb_backends.h
Signed-off-by: Vicent Marti <tanoku@gmail.com>
|
|
|
fc70832a
|
2011-02-23T07:08:50
|
|
include "oid.h" in headers that use git_oid
This makes generating bindings to hlibgit2 easier
|
|
|
7360122b
|
2011-02-24T23:53:40
|
|
Fix file renaming in MinGW
We now use MoveFileEx, which is not assured to be atomic but works for
always (both if the destination exists, or if it doesn't) and is
available in MinGW.
Since this is a Win32 API call, complaint about lost or overwritten files
should be forwarded at Steve Ballmer.
Signed-off-by: Vicent Marti <tanoku@gmail.com>
|
|
|
3eb47c9f
|
2011-02-24T21:43:08
|
|
Fix renaming of files in Win32
The `rename` call doesn't quite work on Win32: expects the destination
file to not exist. We're using a native Win32 call in those cases --
that should do the trick.
Signed-off-by: Vicent Marti <tanoku@gmail.com>
|
|
|
c3be1468
|
2011-02-24T19:31:12
|
|
Fix double-freeing file descriptors
Was crashing the Windows build.
Signed-off-by: Vicent Marti <tanoku@gmail.com>
|
|
|
fc658755
|
2011-02-22T21:59:36
|
|
Rewrite git_hashtable internals
The old hash table with chained buckets has been replaced by a new one
using Cuckoo hashing, which offers guaranteed constant lookup times.
This should improve speeds on most use cases, since hash tables in
libgit2 are usually used as caches where the objects are stored once and
queried several times.
The Cuckoo hash implementation is based off the one in the Basekit
library [1] for the IO language, but rewritten to support an arbritrary
number of hashes. We currently use 3 to maximize the usage of the nodes pool.
[1]: https://github.com/stevedekorte/basekit/blob/master/source/CHash.c
Signed-off-by: Vicent Marti <tanoku@gmail.com>
|
|
|
5591ea15
|
2011-02-22T14:58:54
|
|
Add printf method to the File Buffer
Signed-off-by: Vicent Marti <tanoku@gmail.com>
|
|
|
817c2820
|
2011-02-21T17:05:16
|
|
Rewrite all file IO for more performance
The new `git_filebuf` structure provides atomic high-performance writes
to disk by using a write cache, and optionally a double-buffered scheme
through a worker thread (not enabled yet).
Writes can be done 3-layered, like in git.git (user code -> write cache
-> disk), or 2-layered, by writing directly on the cache. This makes
index writing considerably faster.
The `git_filebuf` structure contains all the old functionality of
`git_filelock` for atomic file writes and reads. The `git_filelock`
structure has been removed.
Additionally, the `git_filebuf` API allows to automatically hash (SHA1)
all the data as it is written to disk (hashing is done smartly on big
chunks to improve performance).
Signed-off-by: Vicent Marti <tanoku@gmail.com>
|
|
|
874c3b6f
|
2011-02-18T14:11:53
|
|
Fix repository initialization
Fixed several issues with path joining and bare repos.
Signed-off-by: Vicent Marti <tanoku@gmail.com>
|
|
|
cb77ad0d
|
2011-02-18T12:23:53
|
|
Fix segfault when iterating a revlist backwards
The `prev` and `next` pointers were not being updated after popping one
of the list elements.
Signed-off-by: Vicent Marti <tanoku@gmail.com>
|
|
|
e822508a
|
2011-02-18T10:29:55
|
|
Disable threaded index writing by default
The interlocking on the write threads was not being done properly (index
entries were sometimes written out of order). With proper interlocking,
the threaded write is only marginally faster on big index files, and
slower on the smaller ones because of the overhead when creating
threads.
The threaded index writing has been temporarily disabled; after more
accurate benchmarks, if might be possible to enable it again only when
writing very large index files (> 1000 entries).
Signed-off-by: Vicent Marti <tanoku@gmail.com>
|
|
|
3ecc8b5e
|
2011-02-18T00:08:34
|
|
Fix refcounting initialization
Signed-off-by: Vicent Marti <tanoku@gmail.com>
|
|
|
084c1935
|
2011-02-17T23:32:22
|
|
Fix type truncation in index entries
64-bit types stored in memory have to be truncated into 32 bits when
writing to disk. Was causing warnings in MSVC.
Signed-off-by: Vicent Marti <tanoku@gmail.com>
|
|
|
348c7335
|
2011-02-17T21:32:00
|
|
Improve the performance when writing Index files
In response to issue #60 (git_index_write really slow), the write_index
function has been rewritten to improve its performance -- it should now
be in par with the performance of git.git.
On top of that, if Posix Threads are available when compiling libgit2, a
new threaded writing system will be used (3 separate threads take care
of solving byte-endianness, hashing the contents of the index and
writing to disk, respectively). For very long Index files, this method
is up to 3x times faster than git.git.
Signed-off-by: Vicent Marti <tanoku@gmail.com>
|
|
81d0ff1c
|
2011-02-14T13:22:44
|
|
fix cast in tag.h
git_tag_lookup() and git_tag_new() changed to cast GIT_OBJ_TAG to
git_otype in order to compile lib in xcode
|
|
|
d4b5a4e2
|
2011-02-09T19:49:02
|
|
Internal changes on the backend system
The priority value for different backends has been removed from the
public `git_odb_backend` struct. We handle that internally. The priority
value is specified on the `git_odb_add_alternate`.
This is convenient because it allows us to poll a backend twice with
different priorities without having to instantiate it twice.
We also differentiate between main backends and alternates; alternates have
lower priority and cannot be written to.
These changes come with some unit tests to make sure that the backend
sorting is consistent.
The libgit2 version has been bumped to 0.4.0.
This commit changes the external API:
CHANGED:
struct git_odb_backend
No longer has a `priority` attribute; priority for the backend
in managed internally by the library.
git_odb_add_backend(git_odb *odb, git_odb_backend *backend, int priority)
Now takes an additional priority parameter, the priority that
will be given to the backend.
ADDED:
git_odb_add_alternate(git_odb *odb, git_odb_backend *backend, int priority)
Add a backend as an alternate. Alternate backends have always
lower priority than main backends, and writing is disabled on
them.
Signed-off-by: Vicent Marti <tanoku@gmail.com>
Signed-off-by: Vicent Marti <tanoku@gmail.com>
|
|
|
5a800efc
|
2011-02-09T12:46:54
|
|
Honor alternate entries in the ODB
The alternates file is now parsed, and the alternate ODB folders are
added as separate backends. This allows the library to efficiently query
the alternate folders.
Signed-off-by: Vicent Marti <tanoku@gmail.com>
|
|
|
995f9c34
|
2011-02-09T12:43:19
|
|
Use the new git__joinpath to build paths in methods
The `git__joinpath` function has been changed to use a statically
allocated buffer; we assume the buffer to be 4096 bytes, because fuck
you.
The new method also supports an arbritrary number of paths to join,
which may come in handy in the future.
Some methods which were manually joining paths with `strcpy` now use the
new function, namely those in `index.c` and `refs.c`.
Based on Emeric Fermas' original patch, which was using the old
`git__joinpath` because I'm stupid. Thanks!
Signed-off-by: Vicent Marti <tanoku@gmail.com>
|
|
|
122c3405
|
2011-02-07T18:25:42
|
|
Git trees are now always lazily sorted
Removed `git_tree_add_entry_unsorted`. Now the `git_tree_add_entry`
method doesn't sort the entries array by default; entries are only
sorted lazily when required. This is done automatically by the library
(the `git_tree_sort_entries` call has been removed).
This should improve performance. No point on sorting entries all the time, anyway.
Signed-off-by: Vicent Marti <tanoku@gmail.com>
|
|
|
8212e2d7
|
2011-02-07T18:25:23
|
|
Fix detection of working dir on repositories
Signed-off-by: Vicent Marti <tanoku@gmail.com>
|
|
|
9d1dcca2
|
2011-02-07T10:35:58
|
|
Add proper version management
We now have proper sonames in Mac OS X and Linux, proper versioning on
the pkg-config file and proper DLL naming in Windows.
The version of the library is defined exclusively in 'src/git2.h'; the build scripts
read it from there automatically.
Signed-off-by: Vicent Marti <tanoku@gmail.com>
|
|
|
becff042
|
2011-02-07T08:09:11
|
|
Fix compilation in MSVC
The git_odb_backend_* symbols were being redefined as external.
Signed-off-by: Vicent Marti <tanoku@gmail.com>
|
|
|
e85c705f
|
2011-02-07T08:04:04
|
|
Merge branch 'join-path-tests' of https://github.com/nulltoken/libgit2
|
|
|
13317a5e
|
2011-02-07T08:03:06
|
|
Merge branch 'chobie_git_dir_fix' of https://github.com/chobie/libgit2
|
|
e769e025
|
2011-02-07T00:11:17
|
|
Git does not like zero padded file attributes (git fsck)
|
|
|
5bf42916
|
2011-02-07T00:11:00
|
|
Further correction to tree entry sorting (for git fsck)
|
|
56ab8c54
|
2011-02-06T15:48:52
|
|
fix can't detect repository index issues.
|
|
|
a79e8e63
|
2011-02-05T19:22:44
|
|
Fixed a small issue in git__join_path(). Added tests to exercise git__join_path().
|
|
|
fb8dd803
|
2011-02-05T19:49:42
|
|
Merge branch 'sqlite-backend'
|
|
|
c041af95
|
2011-02-05T19:45:57
|
|
Add support for SQLite backends
Configure again the build system to look for SQLite3. If the library is
found, the SQLite backend will be automatically compiled.
Enjoy *very* fast reads and writes.
MASTER PROTIP: Initialize the backend with ":memory" as the path to the
SQLite database for fully-hosted in-memory repositories. Rejoice.
Signed-off-by: Vicent Marti <tanoku@gmail.com>
|
|
|
95901128
|
2011-02-05T18:17:01
|
|
Move data from t03 to a separate header
Signed-off-by: Vicent Marti <tanoku@gmail.com>
|
|
|
40be9ae0
|
2011-02-05T15:03:48
|
|
Fixes a Win32/MSVC compilation issue.
|
|
|
412b3887
|
2011-02-05T13:12:02
|
|
Add new utility method `git__joinpath`
Signed-off-by: Vicent Marti <tanoku@gmail.com>
|
|
|
f725931b
|
2011-02-05T12:42:41
|
|
Fix directory/path manipulation methods
The `dirname` and `dirbase` methods have been replaced with the Android
implementation, which is actually compilant to some kind of standard.
A new method `topdir` has been added, which returns the topmost
directory in a path.
These changes fix issue #49:
`gitfo_prettify_dir_path` converts "./.git/" to ".git/", so
the code at src/repository.c:190 goes out of bounds when
trying to find the topmost directory.
The new `git__topdir` method handles this gracefully, and the
fixed `git__dirname` now returns the proper value for the
repository's working dir.
E.g.
/repo/.git/ ==> working dir '/repo/'
.git/ ==> working dir '.'
Signed-off-by: Vicent Marti <tanoku@gmail.com>
|
|
|
c836c332
|
2011-02-05T09:29:37
|
|
Make more methods return error codes
git_revwalk_next now returns an error code when the iteration is over.
git_repository_index now returns an error code when the index file could
not be opened.
Signed-off-by: Vicent Marti <tanoku@gmail.com>
|
|
|
4569bfa5
|
2011-02-05T09:11:17
|
|
Keep the tree entries always internally sorted
Don't allow access to any tree entries whilst the entries array is
unsorted. We keep track on when the array is unsorted, and any methods
that access the array while it is unsorted now sort the array before
accessing it.
Signed-off-by: Vicent Marti <tanoku@gmail.com>
|
|
|
5d773a6e
|
2011-02-05T09:00:09
|
|
Merge branch 'master' of https://github.com/jwiegley/libgit2
|
|
|
35786cb7
|
2011-02-02T19:00:26
|
|
Use Git's own tree entry sorting algorithm
If plain strcmp is used, as this code did before, the final sorting may
end up different from what git-add would do (for example, 'boost'
appearing before 'boost-build.jam', because Git sorts as if it were
spelled 'boost/').
If the sorting is incorrect like this, Git 1.7.4 insists that unmodified
files have been modified. For example, my test repository has these
four entries:
drwxr-xr-x 199 johnw wheel 6766 Feb 2 17:21 boost
-rw-r--r-- 1 johnw wheel 849 Feb 2 17:22 boost-build.jam
-rw-r--r-- 1 johnw wheel 989 Feb 2 17:21 boost.css
-rw-r--r-- 1 johnw wheel 6308 Feb 2 17:21 boost.png
Here is the output from git-ls-tree for these files, in a commit tree
created using git-add and git-commit:
100644 blob 8b8775433aef73e9e12609610ae2e35cf1e7ec2c boost-build.jam
100644 blob 986c4050fa96d825a1311c8e871cdcc9a3e0d2c3 boost.css
100644 blob b4d51fcd5c9149fd77f5ca6ed2b6b1b70e8fe24f boost.png
040000 tree 46537eeaa4d577010f19b1c9e940cae9a670ff5c boost
Here is the output for the same commit produced using libgit2:
040000 tree c27c0fd1436f28a6ba99acd0a6c17d178ed58288 boost
100644 blob 8b8775433aef73e9e12609610ae2e35cf1e7ec2c boost-build.jam
100644 blob 986c4050fa96d825a1311c8e871cdcc9a3e0d2c3 boost.css
100644 blob b4d51fcd5c9149fd77f5ca6ed2b6b1b70e8fe24f boost.png
Due to this reordering, git-status claims the three blobs are always
modified, no matter what I do using git-read-tree or git-reset or
git-checkout to update the index.
|
|
|
ddc9e79a
|
2011-02-02T06:16:50
|
|
Fix more issues with Win32 EOL
Signed-off-by: Vicent Marti <tanoku@gmail.com>
|
|
|
ff5873ad
|
2011-02-02T04:01:14
|
|
Fix EOL issues in ref parsing under Win32
Reference files can be loaded using Win32 line endings, too.
Signed-off-by: Vicent Marti <tanoku@gmail.com>
|
|
|
bf3389b9
|
2011-02-01T05:57:45
|
|
Fixed bug where git__source_printf needs multiple attempts
|
|
|
9217bbda
|
2011-02-01T05:00:52
|
|
Fixed a bug with the way commits are written
|
|
|
89f9fc6f
|
2011-01-28T02:41:59
|
|
Make git_tree_clear_entries visible to the user
|
|
|
75e051c6
|
2011-01-27T14:20:23
|
|
Added git_tree_add_entry_unsorted and git_tree_sort_entries
|
|
|
b70e4f8a
|
2011-02-01T03:21:53
|
|
Add required includes in "oid.h"
The file was previously failing to be included stand-alone.
|
|
|
2f8a8ab2
|
2011-01-29T01:56:25
|
|
Refactor reference parsing code
Several changes have been committed to allow the user to create
in-memory references and write back to disk. Peeling of symbolic
references has been made explicit. Added getter and setter methods for
all attributes on a reference. Added corresponding documentation.
Signed-off-by: Vicent Marti <tanoku@gmail.com>
|
|
|
9282e921
|
2010-12-27T20:34:19
|
|
Merge nulltoken's reference parsing code
All the commits have been squashed into a single one before refactoring
the final code, to keep everything tidy.
Individual commit messages are as follows:
Added repository reference looking up functionality placeholder.
Added basic reference database definition and caching infrastructure.
Removed useless constant.
Added GIT_EINVALIDREFNAME error and description. Added missing description for GIT_EBAREINDEX.
Added GIT_EREFCORRUPTED error and description.
Added GIT_ETOONESTEDSYMREF error and description.
Added resolving of direct and symbolic references.
Prepared the packed-refs parsing.
Added parsing of the packed-refs file content.
When no loose reference has been found, the full content of the packed-refs file is parsed. All of the new (i.e. not previously parsed as a loose reference) references are eagerly stored in the cached references storage.
The method packed_reference_file__parse() is in deer need of some refactoring. :-)
Extracted to a method the parsing of the peeled target of a tag.
Extracted to a method the parsing of a standard packed ref.
Fixed leaky removal of the cached references.
Ensured that a previously parsed packed reference isn't returned if a more up-to-date loose reference exists.
Enhanced documentation of git_repository_reference_lookup().
Moved some refs related constants from repository.c to refs.h.
Made parsing of a packed tag reference more robust.
Updated git_repository_reference_lookup() documentation.
Added some references to the test repository.
Added some tests covering tag references looking up.
Added some tests covering symbolic and head references looking up.
Added some tests covering packed references looking up.
|
|
|
f2c24713
|
2011-01-26T20:29:06
|
|
Made path prettifying functions return GIT_EINVALIDPATH instead of GIT_ERROR.
|
|
|
2e6fd09c
|
2011-01-25T21:52:24
|
|
Fixed naming convention related issue.
|
|
|
eb2f3b47
|
2011-01-23T19:01:57
|
|
Made git_repository_open2() and git_repository_open3() benefit from recently added path prettifying function.
|