|
4296a36b
|
2017-07-10T09:36:19
|
|
ignore: honor case insensitivity for negative ignores
When computing negative ignores, we throw away any rule which does not
undo a previous rule to optimize. But on case insensitive file systems,
we need to keep in mind that a negative ignore can also undo a previous
rule with different case, which we did not yet honor while determining
whether a rule undoes a previous one. So in the following example, we
fail to unignore the "/Case" directory:
/case
!/Case
Make both paths checking whether a plain- or wildcard-based rule undo a
previous rule aware of case-insensitivity. This fixes the described
issue.
|
|
|
32cc5edc
|
2017-07-07T17:10:57
|
|
tests: status: additional test for negative ignores with pattern
This test is by Carlos Martín Nieto.
|
|
|
5c15cd94
|
2017-07-07T13:27:27
|
|
ignore: keep negative rules containing wildcards
Ignore rules allow for reverting a previously ignored rule by prefixing
it with an exclamation mark. As such, a negative rule can only override
previously ignored files. While computing all ignore patterns, we try to
use this fact to optimize away some negative rules which do not override
any previous patterns, as they won't change the outcome anyway.
In some cases, though, this optimization causes us to get the actual
ignores wrong for some files. This may happen whenever the pattern
contains a wildcard, as we are unable to reason about whether a pattern
overrides a previous pattern in a sane way. This happens for example in
the case where a gitignore file contains "*.c" and "!src/*.c", where we
wouldn't un-ignore files inside of the "src/" subdirectory.
In this case, the first solution coming to mind may be to just strip the
"src/" prefix and simply compare the basenames. While that would work
here, it would stop working as soon as the basename pattern itself is
different, like for example with "*x.c" and "!src/*.c. As such, we
settle for the easier fix of just not optimizing away rules that contain
a wildcard.
|
|
54d4e5de
|
2017-06-21T14:57:30
|
|
Remove invalid submodule
Fixes #4274
|
|
cc9b0b6c
|
2017-06-16T21:05:58
|
|
tests: try to init with empty template path
|
|
|
e7c24ea2
|
2017-07-20T21:00:15
|
|
tests: fix the rebase-submodule test
|
|
8296da5f
|
2017-06-14T10:49:28
|
|
Merge pull request #4267 from mohseenrm/master
adding GIT_FILTER_VERSION to GIT_FILTER_INIT as part of convention
|
|
a78441bc
|
2017-06-13T11:05:40
|
|
Adding git_filter_init for initializing `git_filter` struct + unit test
|
|
|
a180e7d9
|
2017-06-13T11:10:19
|
|
tests: odb: add more low-level backend tests
Introduce a new test suite "odb::backend::simple", which utilizes the
fake backend to exercise the ODB abstraction layer. While such tests
already exist for the case where multiple backends are put together, no
direct testing for functionality with a single backend exist yet.
|
|
|
b2e53f36
|
2017-06-13T11:39:36
|
|
tests: odb: implement `exists_prefix` for the fake backend
The fake backend currently implements all reading functions except for
the `exists_prefix` one. Implement it to enable further testing of the
ODB layer.
|
|
|
983e627d
|
2017-06-13T11:38:59
|
|
tests: odb: use correct OID length
The `search_object` function takes the OID length as one of its
parameters, where its maximum length is `GIT_OID_HEXSZ`. The `exists`
function of the fake backend used `GIT_OID_RAWSZ` though, leading to
only the first half of the OID being used when finding the correct
object.
|
|
|
c4cbb3b1
|
2017-06-13T11:38:14
|
|
tests: odb: have the fake backend detect ambiguous prefixes
In order to be able to test the ODB prefix functions, we need to be able
to detect ambiguous prefixes in case multiple objects with the same
prefix exist in the fake ODB. Extend `search_object` to detect ambiguous
queries and have callers return its error code instead of always
returning `GIT_ENOTFOUND`.
|
|
|
95170294
|
2017-06-13T11:08:28
|
|
tests: core: test initialization of `git_proxy_options`
Initialization of the `git_proxy_options` structure is never tested
anywhere. Include it in our usual initialization test in
"core::structinit::compare".
|
|
|
bee423cc
|
2017-06-13T10:29:23
|
|
tests: network: add missing include for `git_repository_new`
A newly added test uses the `git_repository_new` function without the
corresponding header file being included. While this works due to the
compiler deducing the correct function signature, we should obviously
just include the function's declaration file.
|
|
|
2ca088bd
|
2017-06-12T22:47:54
|
|
Merge pull request #4265 from pks-t/pks/read-prefix-tests
Read prefix tests
|
|
|
fe9a5dd3
|
2017-06-12T12:00:14
|
|
remote: ensure we can create an anon remote on inmemory repo
Given a wholly in-memory repository, ensure that we can create an
anonymous remote and perform actions on it.
|
|
|
f148258a
|
2017-06-12T16:19:45
|
|
tests: odb: add tests with multiple backends
Previous to pulling out and extending the fake backend, it was quite
cumbersome to write tests for very specific scenarios regarding
backends. But as we have made it more generic, it has become much easier
to do so. As such, this commit adds multiple tests for scenarios with
multiple backends for the ODB.
The changes also include a test for a very targeted scenario. When one
backend found a matching object via `read_prefix`, but the last backend
returns `GIT_ENOTFOUND` and when object hash verification is turned off,
we fail to reset the error code to `GIT_OK`. This causes us to segfault
later on, when doing a double-free on the returned object.
|
|
|
6e010bb1
|
2017-06-12T15:43:56
|
|
tests: odb: allow passing fake objects to the fake backend
Right now, the fake backend is quite restrained in the way how it
works: we pass it an OID which it is to return later as well as an error
code we want it to return. While this is sufficient for existing tests,
we can make the fake backend a little bit more generic in order to allow
us testing for additional scenarios.
To do so, we change the backend to not accept an error code and OID
which it is to return for queries, but instead a simple array of OIDs
with their respective blob contents. On each query, the fake backend
simply iterates through this array and returns the first matching
object.
|
|
|
369cb45f
|
2017-06-12T15:21:58
|
|
tests: do not reuse OID from backend
In order to make the fake backend more useful, we want to enable it
holding multiple object references. To do so, we need to decouple it
from the single fake OID it currently holds, which we simply move up
into the calling tests.
|
|
|
2add34d0
|
2017-06-12T14:53:46
|
|
tests: odb: move fake backend into its own file
The fake backend used by the test suite `odb::backend::nonrefreshing` is
useful to have some low-level tests for the ODB layer. As such, we move
the implementation into its own `backend_helpers` module.
|
|
|
6f960b55
|
2017-06-11T10:37:46
|
|
Merge pull request #4088 from chescock/packfile-name-using-complete-hash
Ensure packfiles with different contents have different names
|
|
|
d2c4f764
|
2017-06-11T09:54:04
|
|
Merge pull request #4260 from libgit2/ethomson/forced_checkout_2
Update to forced checkout and untracked files
|
|
|
0ef405b3
|
2017-02-15T14:05:10
|
|
checkout: do not delete directories with untracked entries
If the `GIT_CHECKOUT_FORCE` flag is given to any of the `git_checkout`
invocations, we remove files which were previously staged. But while
doing so, we unfortunately also remove unstaged files in a directory
which contains at least one staged file, resulting in potential data
loss.
This commit adds two tests to verify behavior.
|
|
|
6c23704d
|
2017-06-08T21:40:18
|
|
settings: rename `GIT_OPT_ENABLE_SYNCHRONOUS_OBJECT_CREATION`
Initially, the setting has been solely used to enable the use of
`fsync()` when creating objects. Since then, the use has been extended
to also cover references and index files. As the option is not yet part
of any release, we can still correct this by renaming the option to
something more sensible, indicating not only correlation to objects.
This commit renames the option to `GIT_OPT_ENABLE_FSYNC_GITDIR`. We also
move the variable from the object to repository source code.
|
|
|
92d3ea4e
|
2017-05-19T13:04:32
|
|
tests: index::version: improve write test for index v4
The current write test does not trigger some edge-cases in the index
version 4 path compression code. Rewrite the test to start off the an
empty standard repository, creating index entries with interesting paths
itself. This allows for more fine-grained control over checked paths.
Furthermore, we now also verify that entry paths are actually
reconstructed correctly.
|
|
|
8fe33538
|
2017-05-19T12:45:48
|
|
tests: index::version: verify we write compressed index entries
While we do have a test which checks whether a written index of version
4 has the correct version set, we do not check whether this actually
enables path compression for index entries. This commit adds a new test
by adding a number of index entries with equal path prefixes to the
index and subsequently flushing that to disk. With suffix compression
enabled by index version 4, only the last few bytes of these paths will
actually have to be written to the index, saving a lot of disk space.
For the test, differences are about an order of magnitude, allowing us
to easily verify without taking a deeper look at actual on-disk
contents.
|
|
|
82368b1b
|
2017-05-12T10:04:42
|
|
tests: index::version: add test to read index version v4
While we have a simple test to determine whether we can write an index
of version 4, we never verified that we are able to read this kind of
index (and in fact, we were not able to do so). Add a new repository
which has an index of version 4. This repository is then read from a new
test.
|
|
|
fea0c81e
|
2017-05-12T09:09:07
|
|
tests: index::version: move up cleanup function
The init and cleanup functions for test suites are usually prepended to
our actual tests. The index::version test suite does not adhere to this
stile. Fix this.
|
|
|
8a5e7aae
|
2017-05-22T12:53:44
|
|
varint: fix computation for remaining buffer space
When encoding varints to a buffer, we want to remain sure that the
required buffer space does not exceed what is actually available. Our
current check does not do the right thing, though, in that it does not
honor that our `pos` variable counts the position down instead of up. As
such, we will require too much memory for small varints and not enough
memory for big varints.
Fix the issue by correctly calculating the required size as
`(sizeof(varint) - pos)`. Add a test which failed before.
|
|
|
dd0aa811
|
2017-06-04T22:46:07
|
|
Merge branch 'pr/4228'
|
|
|
82e929a8
|
2017-06-04T19:35:39
|
|
Merge pull request #4239 from roblg/toplevel-dir-ignore-fix
Fix issue with directory glob ignore in subdirectories
|
|
|
04de614b
|
2017-06-04T19:03:07
|
|
Merge pull request #4243 from pks-t/pks/submodule-workdir
Submodule working directory
|
|
a1023a43
|
2017-05-20T17:18:07
|
|
Merge pull request #4179 from libgit2/ethomson/expand_tilde
Introduce home directory expansion function for config files, attribute files
|
|
|
e694e4e9
|
2017-05-20T14:17:36
|
|
Merge pull request #4174 from libgit2/ethomson/set_head_to_tag
git_repository_set_head: use tag name in reflog
|
|
|
119bdd86
|
2017-05-20T14:13:27
|
|
Merge pull request #4231 from wabain/open-revrange
revparse: support open-ended ranges
|
|
c0e54155
|
2017-01-11T10:39:59
|
|
indexer: name pack files after trailer hash
Upstream git.git has changed the way how packfiles are named.
Previously, they were using a hash of the contained object's OIDs, which
has then been changed to use the hash of the complete packfile instead.
See 1190a1acf (pack-objects: name pack files after trailer hash,
2013-12-05) in the git.git repository for more information on this
change.
This commit changes our logic to match the behavior of core git.
|
|
|
2696c5c3
|
2017-05-19T09:21:17
|
|
repository: make check if repo is a worktree more strict
To determine if a repository is a worktree or not, we currently check
for the existence of a "gitdir" file inside of the repository's gitdir.
While this is sufficient for non-broken repositories, we have at least
one case of a subtly broken repository where there exists a gitdir file
inside of a gitmodule. This will cause us to misidentify the submodule
as a worktree.
While this is not really a fault of ours, we can do better here by
observing that a repository can only ever be a worktree iff its common
directory and dotgit directory are different. This allows us to make our
check whether a repo is a worktree or not more strict by doing a simple
string comparison of these two directories. This will also allow us to
do the right thing in the above case of a broken repository, as for
submodules these directories will be the same. At the same time, this
allows us to skip the `stat` check for the "gitdir" file for most
repositories.
|
|
c3b8e8b3
|
2017-05-14T10:28:05
|
|
Fix issue with directory glob ignore in subdirectories
|
|
|
e526fbc7
|
2017-05-17T09:23:06
|
|
tests: add test suite for opening submodules
|
|
|
98a5f081
|
2017-05-03T13:53:13
|
|
tests: threads::basic: remove unused function `exit_abruptly`
|
|
|
7d7f6d33
|
2017-05-03T13:52:55
|
|
tests: clone::local: compile UNC functions for Windows only
|
|
8b107dc5
|
2017-05-03T11:20:57
|
|
revparse: support open-ended ranges
Support '..' and '...' ranges where one side is not specified.
The unspecified side defaults to HEAD.
Closes #4223
|
|
|
8264a30f
|
2017-05-02T10:11:28
|
|
worktree: support creating locked worktrees
When creating a new worktree, we do have a potential race with us
creating the worktree and another process trying to delete the same
worktree as it is being created. As such, the upstream git project has
introduced a flag `git worktree add --locked`, which will cause the
newly created worktree to be locked immediately after its creation. This
mitigates the race condition.
We want to be able to mirror the same behavior. As such, a new flag
`locked` is added to the options structure of `git_worktree_add` which
allows the user to enable this behavior.
|
|
|
883eeb5f
|
2017-05-02T12:35:59
|
|
worktree: switch over worktree pruning to an opts structure
The current signature of `git_worktree_prune` accepts a flags field to
alter its behavior. This is not as flexible as we'd like it to be when
we want to enable passing additional options in the future. As the
function has not been part of any release yet, we are still free to
alter its current signature. This commit does so by using our usual
pattern of an options structure, which is easily extendable without
breaking the API.
|
|
|
ffd264d9
|
2017-05-03T14:51:23
|
|
tests: repo: fix repo discovery tests on overlayfs
Debian and Ubuntu often use schroot to build their DEB packages in a
controlled environment. Depending on how schroot is configured, our
tests regarding repository discovery break due to not being able to find
the repositories anymore. It turns out that these errors occur when the
schroot is configured to use an overlayfs on the directory structures.
The reason for this failure is that we usually refrain from discovering
repositories across devices. But unfortunately, overlayfs does not have
consistent device identifiers for all its files but will instead use the
device number of the filesystem the file stems from. So whenever we
cross boundaries between the upper and lower layer of the overlay, we
will fail to properly detect the repository and bail out.
This commit fixes the issue by enabling cross-device discovery in our
tests. While it would be preferable to have this turned off, it probably
won't do much harm anyway as we set up our tests in a temporary location
outside of the parent repository.
|
|
|
a7aa73a5
|
2017-05-02T10:02:36
|
|
worktree: introduce git_worktree_add options
The `git_worktree_add` function currently accepts only a path and name
for the new work tree. As we may want to expand these parameters in
future versions without adding additional parameters to the function for
every option, this commit introduces our typical pattern of an options
struct. Right now, this structure is still empty, which will change with
the next commit.
|
|
|
1dc89aab
|
2017-05-01T21:34:21
|
|
object validation: free some memleaks
|
|
|
13c1bf07
|
2017-05-01T16:17:48
|
|
Merge pull request #4197 from pks-t/pks/verify-object-hashes
Verify object hashes
|
|
|
5700ee9c
|
2017-05-01T16:10:50
|
|
Merge pull request #4216 from pks-t/pks/debian-test-failures
Debian HTTPS feature test failure
|
|
|
35079f50
|
2017-04-21T07:31:56
|
|
odb: add option to turn off hash verification
Verifying hashsums of objects we are reading from the ODB may be costly
as we have to perform an additional hashsum calculation on the object.
Especially when reading large objects, the penalty can be as high as
35%, as can be seen when executing the equivalent of `git cat-file` with
and without verification enabled. To mitigate for this, we add a global
option for libgit2 which enables the developer to turn off the
verification, e.g. when he can be reasonably sure that the objects on
disk won't be corrupted.
|
|
|
28a0741f
|
2017-04-10T09:30:08
|
|
odb: verify object hashes
The upstream git.git project verifies objects when looking them up from
disk. This avoids scenarios where objects have somehow become corrupt on
disk, e.g. due to hardware failures or bit flips. While our mantra is
usually to follow upstream behavior, we do not do so in this case, as we
never check hashes of objects we have just read from disk.
To fix this, we create a new error class `GIT_EMISMATCH` which denotes
that we have looked up an object with a hashsum mismatch. `odb_read_1`
will then, after having read the object from its backend, hash the
object and compare the resulting hash to the expected hash. If hashes do
not match, it will return an error.
This obviously introduces another computation of checksums and could
potentially impact performance. Note though that we usually perform I/O
operations directly before doing this computation, and as such the
actual overhead should be drowned out by I/O. Running our test suite
seems to confirm this guess. On a Linux system with best-of-five
timings, we had 21.592s with the check enabled and 21.590s with the
ckeck disabled. Note though that our test suite mostly contains very
small blobs only. It is expected that repositories with bigger blobs may
notice an increased hit by this check.
In addition to a new test, we also had to change the
odb::backend::nonrefreshing test suite, which now triggers a hashsum
mismatch when looking up the commit "deadbeef...". This is expected, as
the fake backend allocated inside of the test will return an empty
object for the OID "deadbeef...", which will obviously not hash back to
"deadbeef..." again. We can simply adjust the hash to equal the hash of
the empty object here to fix this test.
|
|
|
d59dabe5
|
2017-04-10T09:00:51
|
|
tests: object: test looking up corrupted objects
We currently have no tests which check whether we fail reading corrupted
objects. Add one which modifies contents of an object stored on disk and
then tries to read the object.
|
|
|
86c03552
|
2017-04-10T09:27:04
|
|
tests: object: create sandbox
The object::lookup tests do use the "testrepo.git" repository in a
read-only way, so we do not set up the repository as a sandbox but
simply open it. But in a future commit, we will want to test looking up
objects which are corrupted in some way, which requires us to modify the
on-disk data. Doing this in a repository without creating the sandbox
will modify contents of our libgit2 repository, though.
Create the repository in a sandbox to avoid this.
|
|
|
e29e8029
|
2017-04-10T10:31:22
|
|
tests: odb: make hash of fake backend configurable
In the odb::backend::nonrefreshing test suite, we set up a fake backend
so that we are able to determine if backend functions are called
correctly. During the setup, we also parse an OID which is later on used
to read out the pseudo-object. While this procedure works right now, it
will create problems later when we implement hash verification for
looked up objects. The current OID ("deadbeef") will not match the hash
of contents we give back to the ODB layer and thus cannot be verified.
Make the hash configurable so that we can simply switch the returned for
single tests.
|
|
|
7df580fa
|
2017-04-28T11:58:49
|
|
Merge pull request #4191 from pks-t/pks/wt-ref-renames
Branch renames with worktrees
|
|
|
2a7086fa
|
2017-04-25T13:23:04
|
|
tests: config: verify functionality with read-only backends
|
|
|
417319cc
|
2017-04-25T10:14:37
|
|
tests: core::features: only check for HTTPS if it is supported
|
|
|
a4de1ae3
|
2017-04-25T10:14:19
|
|
cmake: define GIT_HTTPS when HTTPS is supported
|
|
|
13c275ab
|
2017-04-21T07:49:08
|
|
tests: threads::diff: fix warning for unused variable
The threads::diff test suite has a static variable `_retries`, which is
used on Windows platforms only. As it is unused on other systems, the
compiler throws a warning there. Fix the warning by wrapping the
declaration in an ifdef.
|
|
|
8d89e409
|
2017-04-17T17:19:03
|
|
Merge pull request #4192 from libgit2/ethomson/win32_posix
Refactor some of the win32 POSIX emulation
|
|
|
78b8f039
|
2017-02-15T14:00:38
|
|
tests: fix indentation in checkout::head::with_index_only_tree
|
|
|
cf07db2f
|
2017-04-07T16:05:10
|
|
filter: only close filter if it's been initialized correctly
In the function `git_filter_list_stream_data`, we initialize, write and
subesquently close the stream which should receive content processed by
the filter. While we skip writing to the stream if its initialization
failed, we still try to close it unconditionally -- even if the
initialization failed, where the stream might not be set at all, leading
us to segfault.
Semantics in this code is not really clear. The function handling the
same logic for files instead of data seems to do the right thing here in
only closing the stream when initialization succeeded. When stepping
back a bit, this is only reasonable: if a stream cannot be initialized,
the caller would not expect it to be closed again. So actually, both
callers of `stream_list_init` fail to do so. The data streaming function
will always close the stream and the file streaming function will not
close the stream if writing to it has failed.
The fix is thus two-fold:
- callers of `stream_list_init` now close the stream iff it has been
initialized
- `stream_list_init` now closes the lastly initialized stream if
the current stream in the chain failed to initialize
Add a test which segfaulted previous to these changes.
|
|
|
2a485dab
|
2017-04-04T18:55:57
|
|
refs: update worktree HEADs when renaming branches
Whenever we rename a branch, we update the repository's symbolic HEAD
reference if it currently points to the branch that is to be renamed.
But with the introduction of worktrees, we also have to iterate over all
HEADs of linked worktrees to adjust them. Do so.
|
|
|
60297256
|
2017-04-04T16:12:27
|
|
tests: worktree::refs: convert spaces to tabs
|
|
|
48f09c6c
|
2017-04-05T11:59:03
|
|
win32: only set `git_win32__retries` where it exists
|
|
|
89d403cc
|
2017-04-05T09:50:12
|
|
win32: enable `p_utimes` for readonly files
Instead of failing to set the timestamp of a read-only file (like any
object file), set it writable temporarily to update the timestamp.
|
|
|
7ece9065
|
2017-04-03T23:07:16
|
|
win32: make posix emulation retries configurable
POSIX emulation retries should be configurable so that tests can disable
them. In particular, maniacally threading tests may end up trying to
open locked files and need retries, which will slow continuous
integration tests significantly.
|
|
|
e86d02f9
|
2017-04-03T00:10:47
|
|
git_repository_set_head: use remote name in reflog
When `git_repository_set_head` is provided a remote reference, update
the reflog with the tag name, like we do with a branch. This helps
consumers match the semantics of `git checkout remote`.
|
|
|
ed812ee7
|
2017-03-23T12:03:29
|
|
config::include: sanitize homedir
Sanitize the home directory to ensure that we do not accidentally locate
a file called `~/.nonexistentfile`.
|
|
047fe29c
|
2016-06-20T13:05:48
|
|
add failing test to include a missing config file relative to home dir
|
|
|
6ad091dc
|
2017-03-23T09:33:09
|
|
Merge pull request #4176 from libgit2/ethomson/3872
inet_pton: don't assume addr families don't exist
|
|
|
f623cf89
|
2017-03-22T20:32:55
|
|
Merge pull request #4163 from pks-t/pks/submodules-with-worktrees
Worktree fixes
|
|
|
6fd6c678
|
2017-03-22T20:29:22
|
|
Merge pull request #4030 from libgit2/ethomson/fsync
fsync all the things
|
|
|
983979fa
|
2017-03-22T19:52:38
|
|
inet_pton: don't assume addr families don't exist
Address family 5 might exist on some crazy system like Haiku.
Use `INT_MAX-1` as an unsupported address family.
|
|
|
ea3bb5c0
|
2017-03-21T18:12:02
|
|
git_repository_set_head: use tag name in reflog
When `git_repository_set_head` is provided a tag reference, update the
reflog with the tag name, like we do with a branch. This helps
consumers match the semantics of `git checkout tag`.
|
|
|
31059923
|
2017-03-20T12:16:18
|
|
Merge pull request #4169 from csware/absolute-symlink
|
|
|
c10ce7c2
|
2017-03-20T12:11:05
|
|
tests: filebuf: test writing to symlink with absolute paths
|
|
|
b0c9bc92
|
2017-03-15T13:38:54
|
|
submodule: resolve URLs relative to main worktree
It is possible to specify submodule URLs relative to the repository
location. E.g. having a submodule with URL "../submodule" will look for
the submodule at "repo/../submodule".
With the introduction of worktrees, though, we cannot simply resolve the
URL relative to the repository location itself. If the repository for
which a URL is to be resolved is a working tree, we have to resolve the
URL relative to the parent's repository path. Otherwise, the URL would
change depending on where the working tree is located.
Fix this by special-casing when we have a working tree while getting the
URL base.
|
|
|
097f0105
|
2017-03-17T08:54:53
|
|
refdb: create references in commondir
References for a repository are usually created inside of its gitdir.
When using worktrees, though, these references are not to be created
inside the worktree gitdir, but instead inside the gitdir of its parent
repository, which is the commondir. Like this, branches will still be
available after the worktree itself has been deleted.
The filesystem refdb currently still creates new references inside of
the gitdir. Fix this and have it create references in commondir.
|
|
|
8f154be3
|
2017-03-17T08:13:59
|
|
worktree: write resolved paths into link files
The three link files "worktree/.git", ".git/worktrees/<name>/commondir"
and ".git/worktrees/<name>/gitdir" should always contain absolute and
resolved paths. Adjust the logic creating new worktrees to first use
`git_path_prettify_dir` before writing out these files, so that paths
are resolved first.
|
|
|
20a368e2
|
2017-03-15T15:29:29
|
|
worktree: parent path should point to the working dir
The working tree's parent path should not point to the parent's gitdir,
but to the parent's working directory. Pointing to the gitdir would not
make any sense, as the parent's working directory is actually equal to
both repository's common directory.
Fix the issue.
|
|
|
3017ba94
|
2017-03-15T14:24:25
|
|
worktree: implement `git_worktree_open_from_repository`
While we already provide functionality to look up a worktree from a
repository, we cannot do so the other way round. That is given a
repository, we want to look up its worktree if it actually exists.
Getting the worktree of a repository is useful when we want to get
certain meta information like the parent's location, getting the locked
status, etc.
|
|
|
f3c30686
|
2017-03-15T15:04:24
|
|
tests: worktree: use joinpath instead of printf to join paths
|
|
|
fdb3e24a
|
2017-03-15T14:23:59
|
|
tests: worktree: unify init/cleanup in open tests
|
|
|
548e5bdf
|
2017-03-15T12:28:05
|
|
tests: worktree: unify init/cleanup in submodule tests
|
|
|
aa593a65
|
2017-03-15T12:01:02
|
|
tests: worktree: move submodule tests into own suite
|
|
|
c0eba379
|
2017-03-14T11:01:19
|
|
diff_parse: correctly set options for parsed diffs
The function `diff_parsed_alloc` allocates and initializes a
`git_diff_parsed` structure. This structure also contains diff options.
While we initialize its flags, we fail to do a real initialization of
its values. This bites us when we want to actually use the generated
diff as we do not se the option's version field, which is required to
operate correctly.
Fix the issue by executing `git_diff_init_options` on the embedded
struct.
|
|
|
ad5a909c
|
2017-03-14T09:39:37
|
|
patch_parse: fix parsing minimal trailing diff line
In a diff, the shortest possible hunk with a modification (that is, no
deletion) results from a file with only one line with a single character
which is removed. Thus the following hunk
@@ -1 +1 @@
-a
+
is the shortest valid hunk modifying a line. The function parsing the
hunk body though assumes that there must always be at least 4 bytes
present to make up a valid hunk, which is obviously wrong in this case.
The absolute minimum number of bytes required for a modification is
actually 2 bytes, that is the "+" and the following newline. Note: if
there is no trailing newline, the assumption will not be offended as the
diff will have a line "\ No trailing newline" at its end.
This patch fixes the issue by lowering the amount of bytes required.
|
|
|
ace3508f
|
2017-03-14T10:37:47
|
|
patch_generate: fix `git_diff_foreach` only working with generated diffs
The current logic of `git_diff_foreach` makes the assumption that all
diffs passed in are actually derived from generated diffs. With these
assumptions we try to derive the actual diff by inspecting either the
working directory files or blobs of a repository. This obviously cannot
work for diffs parsed from a file, where we do not necessarily have a
repository at hand.
Since the introduced split of parsed and generated patches, there are
multiple functions which help us to handle patches generically, being
indifferent from where they stem from. Use these functions and remove
the old logic specific to generated patches. This allows re-using the
same code for invoking the callbacks on the deltas.
|
|
|
53454be8
|
2017-03-11T19:52:05
|
|
Merge pull request #4157 from adamniedzielski/4099-git-sort-time-uninteresting
Skip uninteresting commits in revwalk timesort iterator
|
|
ffd4df6b
|
2017-03-09T16:32:38
|
|
Merge pull request #4151 from novalis/dturner/rebase-submodule-untracked
rebase: ignore untracked files in submodules
|
|
c11c08a5
|
2017-03-09T14:01:10
|
|
Skip uninteresting commits in revwalk timesort iterator
Fixes #4099
|
|
|
d24ae06d
|
2017-03-06T13:13:47
|
|
refs::namespace: add namespace tests
These simple tests only ensure that we enforce the existence of a
namespace; these mirror the rugged tests, they are not exhaustive.
|
|
2270ca9f
|
2017-03-03T13:27:47
|
|
rebase: ignore untracked files in submodules
An untracked file in a submodule should not prevent a rebase from
starting. Even if the submodule's SHA is changed, and that file would
conflict with a new tracked file, it's still OK to start the rebase
and discover the conflict later.
Signed-off-by: David Turner <dturner@twosigma.com>
|
|
|
52d03f37
|
2017-03-03T13:26:29
|
|
git_commit_create: freshen tree objects in commit
Freshen the tree object that a commit points to during commit time.
|
|
|
d087c8f8
|
2017-02-24T14:14:56
|
|
hash: test for sha1 collision attack detection
|
|
|
1c04a96b
|
2017-02-28T12:29:29
|
|
Honor `core.fsyncObjectFiles`
|
|
|
5aa1f12a
|
2017-03-01T07:45:14
|
|
tests: refs::create: fix memory leak
|
|
|
cf8e9a3a
|
2017-03-01T07:35:44
|
|
Merge pull request #4143 from richardipsum/issue-4094
Fix: make reflog include "(merge)" for merge commits
|
|
397cf1a1
|
2017-02-28T22:22:02
|
|
Add test for inclusion of (merge) in reflog
This test ensures that the string '(merge)' is included in the reflog
when a merge commit is made.
|