kmx git

Commit	Date	Message
ba8b8c04	2013-08-07T09:17:20	Improve building ignore file lists The routines to push and pop ignore files while traversing a directory had some issues. In particular, setting up the initial list would sometimes push an ignore file before it ought to be applied if the starting path was a directory containing an ignore file. Also, the pop function was not always matching the right part of the path and would fail to pop ignores from the list in some cases. This adds some tests that exercise a particular problematic case and then fixes the problems that I could find related to this. At some point, I'd like to isolate this ignore rule management code and rewrite it, but that's a larger project and right now, I'll opt to just try to fix the broken behaviors.
85b8b18b	2013-06-19T15:22:48	Add fn to check pathspec for ignored files Command line Git sometimes generates an error message if given a pathspec that contains an exact match to an ignored file (provided --force isn't also given). This adds an internal function that makes it easy to check it that has happened. Right now, I'm not creating a public API for this because that would get a little more complicated with a need for callbacks for all invalid paths.
eac76c23	2013-04-22T14:27:36	Use config cache where possible This converts many of the config lookups that are done around the library to use the repository config cache. This was everything I could find that wasn't part of diff (which requires a larger fix).
5540d947	2013-03-15T16:39:00	Implement global/system file search paths The goal of this work is to expose the search logic for "global", "system", and "xdg" files through the git_libgit2_opts() interface. Behind the scenes, I changed the logic for finding files to have a notion of a git_strarray that represents a search path and to store a separate search path for each of the three tiers of config file. For each tier, I implemented a function to initialize it to default values (generally based on environment variables), and then general interfaces to get it, set it, reset it, and prepend new directories to it. Next, I exposed these interfaces through the git_libgit2_opts interface, reusing the GIT_CONFIG_LEVEL_SYSTEM, etc., constants for the user to control which search path they were modifying. There are alternative designs for the opts interface / argument ordering, so I'm putting this phase out for discussion. Additionally, I ended up doing a little bit of clean up regarding attr.h and attr_file.h, adding a new attrcache.h so the other two files wouldn't have to be included in so many places.
359fc2d2	2013-01-08T17:07:25	update copyrights
ec40b7f9	2012-09-17T15:42:41	Support for core.ignorecase
f917481e	2012-05-03T16:37:25	Support reading attributes from index Depending on the operation, we need to consider gitattributes in both the work dir and the index. This adds a parameter to all of the gitattributes related functions that allows user control of attribute reading behavior (i.e. prefer workdir, prefer index, only use index). This fix also covers allowing us to check attributes (and hence do diff and status) on bare repositories. This was a somewhat larger change that I hoped because it had to change the cache key used for gitattributes files.
b6c93aef	2012-02-21T14:46:24	Uniform iterators for trees, index, and workdir This create a new git_iterator type of object that provides a uniform interface for iterating over the index, an arbitrary tree, or the working directory of a repository. As part of this, git ignore support was extended to support push and pop of directory-based ignore files as the working directory is being traversed (so the array of ignores does not have to be recreated at each directory during traveral). There are a number of other small utility functions in buffer, path, vector, and fileops that are included in this patch that made the iterator implementation cleaner.
5e0de328	2012-02-13T17:10:24	Update Copyright header Signed-off-by: schu <schu-github@schulog.org>
adc9bdb3	2012-01-31T13:59:32	Fix attr path is_dir check When building an attr path object, the code that checks if the file is a directory was evaluating the file as a relative path to the current working directory, instead of using the repo root. This lead to inconsistent behavior.
cfbc880d	2012-01-16T15:16:44	Patch cleanup for merge After reviewing the gitignore support with Vicent, we came up with a list of minor cleanups to prepare for merge, including: * checking git_repository_config error returns * renaming git_ignore_is_ignored and moving to status.h * fixing next_line skipping to include \r skips * commenting on where ignores are and are not included
6a67a812	2012-01-11T16:01:48	Allow ignores (and attribs) for nonexistent files This fixes issue 532 that attributes (and gitignores) could not be checked for files that don't exist. It should be possible to query such things regardless of the existence of the file.
df743c7d	2012-01-09T15:37:19	Initial implementation of gitignore support Adds support for .gitignore files to git_status_foreach() and git_status_file(). This includes refactoring the gitattributes code to share logic where possible. The GIT_STATUS_IGNORED flag will now be passed in for files that are ignored (provided they are not already in the index or the head of repo).

ba8b8c04

2013-08-07T09:17:20

Improve building ignore file lists The routines to push and pop ignore files while traversing a directory had some issues. In particular, setting up the initial list would sometimes push an ignore file before it ought to be applied if the starting path was a directory containing an ignore file. Also, the pop function was not always matching the right part of the path and would fail to pop ignores from the list in some cases. This adds some tests that exercise a particular problematic case and then fixes the problems that I could find related to this. At some point, I'd like to isolate this ignore rule management code and rewrite it, but that's a larger project and right now, I'll opt to just try to fix the broken behaviors.

85b8b18b

2013-06-19T15:22:48

Add fn to check pathspec for ignored files Command line Git sometimes generates an error message if given a pathspec that contains an exact match to an ignored file (provided --force isn't also given). This adds an internal function that makes it easy to check it that has happened. Right now, I'm not creating a public API for this because that would get a little more complicated with a need for callbacks for all invalid paths.

eac76c23

2013-04-22T14:27:36

Use config cache where possible This converts many of the config lookups that are done around the library to use the repository config cache. This was everything I could find that wasn't part of diff (which requires a larger fix).

5540d947

2013-03-15T16:39:00

Implement global/system file search paths The goal of this work is to expose the search logic for "global", "system", and "xdg" files through the git_libgit2_opts() interface. Behind the scenes, I changed the logic for finding files to have a notion of a git_strarray that represents a search path and to store a separate search path for each of the three tiers of config file. For each tier, I implemented a function to initialize it to default values (generally based on environment variables), and then general interfaces to get it, set it, reset it, and prepend new directories to it. Next, I exposed these interfaces through the git_libgit2_opts interface, reusing the GIT_CONFIG_LEVEL_SYSTEM, etc., constants for the user to control which search path they were modifying. There are alternative designs for the opts interface / argument ordering, so I'm putting this phase out for discussion. Additionally, I ended up doing a little bit of clean up regarding attr.h and attr_file.h, adding a new attrcache.h so the other two files wouldn't have to be included in so many places.

359fc2d2

2013-01-08T17:07:25

update copyrights

ec40b7f9

2012-09-17T15:42:41

Support for core.ignorecase

f917481e

2012-05-03T16:37:25

Support reading attributes from index Depending on the operation, we need to consider gitattributes in both the work dir and the index. This adds a parameter to all of the gitattributes related functions that allows user control of attribute reading behavior (i.e. prefer workdir, prefer index, only use index). This fix also covers allowing us to check attributes (and hence do diff and status) on bare repositories. This was a somewhat larger change that I hoped because it had to change the cache key used for gitattributes files.

b6c93aef

2012-02-21T14:46:24

Uniform iterators for trees, index, and workdir This create a new git_iterator type of object that provides a uniform interface for iterating over the index, an arbitrary tree, or the working directory of a repository. As part of this, git ignore support was extended to support push and pop of directory-based ignore files as the working directory is being traversed (so the array of ignores does not have to be recreated at each directory during traveral). There are a number of other small utility functions in buffer, path, vector, and fileops that are included in this patch that made the iterator implementation cleaner.

5e0de328

2012-02-13T17:10:24

Update Copyright header Signed-off-by: schu <schu-github@schulog.org>

adc9bdb3

2012-01-31T13:59:32

Fix attr path is_dir check When building an attr path object, the code that checks if the file is a directory was evaluating the file as a relative path to the current working directory, instead of using the repo root. This lead to inconsistent behavior.

cfbc880d

2012-01-16T15:16:44

Patch cleanup for merge After reviewing the gitignore support with Vicent, we came up with a list of minor cleanups to prepare for merge, including: * checking git_repository_config error returns * renaming git_ignore_is_ignored and moving to status.h * fixing next_line skipping to include \r skips * commenting on where ignores are and are not included

6a67a812

2012-01-11T16:01:48

Allow ignores (and attribs) for nonexistent files This fixes issue 532 that attributes (and gitignores) could not be checked for files that don't exist. It should be possible to query such things regardless of the existence of the file.

df743c7d

2012-01-09T15:37:19

Initial implementation of gitignore support Adds support for .gitignore files to git_status_foreach() and git_status_file(). This includes refactoring the gitattributes code to share logic where possible. The GIT_STATUS_IGNORED flag will now be passed in for files that are ignored (provided they are not already in the index or the head of repo).

thodg/libgit2/src/ignore.h

src/ignore.h

Log