kmx git

Commit	Date	Message
61080a95	2013-11-05T15:10:02	Fix leaks
5a0b8803	2013-11-04T08:05:55	Merge pull request #1929 from libgit2/rb/misc-diff-fixes Fix some observed problems with incorrect diffs
187009e2	2013-11-02T18:34:51	Fix a leak in the diff tests
3e57069e	2013-11-01T13:49:43	Fix --assume-unchanged support This was never really working right because we were checking the wrong flag and not checking it in all the places that we need to be checking it. I finally got around to writing a test and adding actual support for it.
e7c85120	2013-11-01T11:39:37	More tests and fixed for merging reversed diffs There were a lot more cases to deal with to make sure that our merged (i.e. workdir-to-tree-to-index) diffs were matching the output of core Git.
a5c16f3c	2013-11-01T10:18:03	Add git_diff_options_init helper Sometimes the static initializer for git_diff_options cannot be used and since setting them to all zeroes doesn't actually work quite right, this adds a new helper for that situation. This also adds an explicit new value to the submodule settings options to be used when those enums need static initialization.
4bf630b6	2013-10-31T14:36:52	Make diff and status perform soft index reload This changes `git_index_read` to have two modes - a hard index reload that always resets the index to match the on-disk data (which was the old behavior) and a soft index reload that uses the timestamp / file size information and only replaces the index data if the file on disk has been modified. This then updates the git_status code to do a soft reload unless the new GIT_STATUS_OPT_NO_REFRESH flag is passed in. This also changes the behavior of the git_diff functions that use the index so that when an index is not explicitly passed in (i.e. when the functions call git_repository_index for you), they will also do a soft reload for you. This intentionally breaks the file signature of git_index_read because there has been some confusion about the behavior previously and it seems like all existing uses of the API should probably be examined to select the desired behavior.
5de4ec81	2013-10-21T15:36:38	Implement patience and minimal diff flags It seems that to implement these options, we just have to pass the appropriate flags through to the libxdiff code taken from core git. So let's do it (and add a test).
3b5f7954	2013-10-21T13:42:42	Create git_diff_line and extend git_diff_hunk Instead of having functions with so very many parameters to pass hunk and line data, this takes the existing git_diff_hunk struct and extends it with more hunk data, plus adds a git_diff_line. Those structs are used to pass back hunk and line data instead of the old APIs that took tons of parameters. Some work that was previously only being done for git_diff_patch creation (scanning the diff content for exact line counts) is now done for all callbacks, but the performance difference should not be noticable.
10672e3e	2013-10-15T15:10:07	Diff API cleanup This lays groundwork for separating formatting options from diff creation options. This groups the formatting flags separately from the diff list creation flags and reorders the options. This also tweaks some APIs to further separate code that uses patches from code that just looks at git_diffs.
3ff1d123	2013-10-11T14:51:54	Rename diff objects and split patch.h This makes no functional change to diff but renames a couple of the objects and splits the new git_patch (formerly git_diff_patch) into a new header file.
867f7c9b	2013-10-08T16:59:59	Rename new fn to git_repository_reinit_filesystem
14997dc5	2013-10-08T12:45:43	More filemode cleanups for FAT on MacOS This cleans up some additional issues. The main change is that on a filesystem that doesn't support mode bits, libgit2 will now create new blobs with GIT_FILEMODE_BLOB always instead of being at the mercy to the filesystem driver to report executable or not. This means that if "core.filemode" lies and claims that filemode is not supported, then we will ignore the executable bit from the filesystem. Previously we would have allowed it. This adds an option to the new git_repository_reset_filesystem to recurse through submodules if desired. There may be other types of APIs that would like a "recurse submodules" option, but this one is particularly useful. This also has a number of cleanups, etc., for related things including trying to give better error messages when problems come up from the filesystem. For example, the FAT filesystem driver on MacOS appears to return errno EINVAL if you attempt to write a filename with invalid UTF-8 in it. We try to capture that with a better error message now.
5173ea92	2013-10-04T16:32:16	Add git_repository_reset_filesystem and fix tests When a repository is transferred from one file system to another, many of the config settings that represent the properties of the file system may be wrong. This adds a new public API that will refresh the config settings of the repository to account for the change of file system. This doesn't do a full "reinitialize" and operates on a existing git_repository object refreshing the config when done. This commit then makes use of the new API in clar as each test repository is set up. This commit also has a number of other clar test fixes where we were making assumptions about the type of filesystem, either based on outdated config data or based on the OS instead of the FS.
634f10f6	2013-09-24T10:11:20	Fix incorrect return code in crlf filter The git_buf_text_gather_stats call returns a boolean indicating if the file looks like binary data. That shouldn't be an error; it should be used to skip CRLF processing though.
155fa234	2013-09-05T15:06:42	Add clar helper to create new commit from index There were a lot of places in the test code base that were creating a commit from the index on the current branch. This just adds a helper to handle that case pretty easily. There was only one test where this change ended up tweaking the test data, so pretty easy and mostly just a cleanup.
8427757f	2013-09-13T12:32:45	Fixing up some win32 issues with autocrlf
d5b1866c	2013-09-13T09:26:26	Rearrange clar submodule cleanup code
27061b15	2013-09-05T10:25:16	Fix some newer GCC compiler warnings
cf94024c	2013-09-04T11:42:48	Update clar
17c7fbf6	2013-08-21T14:07:53	Split rewrites, status doesn't return rewrites Ensure that we apply splits to rewrites, even if we're not interested in examining it closely for rename/copy detection. In keeping with core git, status should not display rewrites, it should simply show files as "modified".
5e96f316	2013-08-08T08:54:38	Merge pull request #1738 from libgit2/diff-patch-content-size Add API for getting at git_diff_patch->content_size
e8242022	2013-08-05T09:59:02	Move slow tests to "stress" clar module Create a new section of clar tests "stress" that will default to being off where we can put slow tests that push the library for performance testing purposes.
31b42eac	2013-08-04T14:09:44	Restore commented out tests This restores the commented out tests (even though they're slow) and fixes some trailing whitespace.
0a38eb42	2013-07-31T22:36:50	Rename test for rename from rewrite A rename test that illustrates a rename from a rewrite.
a42c2a8c	2013-07-31T21:51:50	Rename test for multiple similar matches A rename test that illustrates a source matching multiple targets.
d730d3f4	2013-07-31T16:40:42	Major rename detection changes After doing further profiling, I found that a lot of time was being spent attempting to insert hashes into the file hash signature when using the rolling hash because the rolling hash approach generates a hash per byte of the file instead of one per run/line of data. To optimize this, I decided to convert back to a run-based file signature algorithm which would be more like core Git. After changing this, a number of the existing tests started to fail. In some cases, this appears to have been because the test was coded to be too specific to the particular results of the file similarity metric and in some cases there appear to have been bugs in the core rename detection code where only by the coincidence of the file similarity scoring were the expected results being generated. This renames all the variables in the core rename detection code to be more consistent and hopefully easier to follow which made it a bit easier to reason about the behavior of that code and fix the problems that I was seeing. I think it's in better shape now. There are a couple of tests now that attempt to stress test the rename detection code and they are quite slow. Most of the time is spent setting up the test data on disk and in the index. When we roll out performance improvements for index insertion, it should also speed up these tests I hope.
a5140f4d	2013-07-24T17:11:49	Fix rename detection for tree-to-tree diffs The performance improvements I introduced for rename detection were not able to run successfully for tree-to-tree diffs because the blob size was not known early enough and so the file signature always had to be calculated nonetheless. This change separates loading blobs into memory from calculating the signature. I can't avoid having to load the large blobs into memory, but by moving it forward, I'm able to avoid the signature calculation if the blob won't come into play for renames.
397357a0	2013-07-24T13:12:00	Add rename test that used to be really slow Before the optimization commits, this test used to take about 20 seconds to run on my machine. Afterwards, there is still a couple seconds of data setup, but the actual diff and rename detection runs in a fraction of a second.
197b8966	2013-07-23T14:34:31	Add hunk/file headers to git_diff_patch_size This allows git_diff_patch_size to account for hunk headers and file headers in the returned size. This required some refactoring of the code that is used to print file headers so that it could be invoked by the git_diff_patch_size API. Also this increases the test coverage and fixes an off-by-one bug in the size calculation when newline changes happen at the end of the file.
b4a4cf24	2013-07-22T16:07:56	Add git_diff_patch_size() API This adds a new API to get the size in bytes of the diffs in a git_diff_patch object.
d6cb13d7	2013-07-13T14:00:05	tests: Fix memory leak
584f2d30	2013-07-11T11:04:42	Fix warnings on Win64
125655fe	2013-07-02T16:49:57	Untracked directories with .git should be ignored This restores a behavior that was accidentally lost during some diff refactoring where an untracked directory that contains a .git item should be treated as IGNORED, not as UNTRACKED. The submodule code already detects this, but the diff code was not handling the scenario right. This also updates a number of existing tests that were actually exercising the behavior but did not have the right expectations in place. It actually makes the new `test_diff_submodules__diff_ignore_options` test feel much better because the "not-a-submodule" entries are now ignored instead of showing up as untracked items. Fixes #1697
9564229a	2013-06-30T08:43:07	Add tests for diff.ignoreSubmdules config
f9775a37	2013-06-29T23:22:31	Add ignore_submodules to diff options This adds correct support for an equivalent to --ignore-submodules in diff, where an actual ignore value can be passed to diff to override the per submodule settings in the configuration. This required tweaking the constants for ignore values so that zero would not be used and could represent an unset option to the diff. This was an opportunity to move the submodule values into include/git2/types.h and to rename the poorly named DEFAULT values for ignore and update constants to RESET instead. Now the GIT_DIFF_IGNORE_SUBMODULES flag is exactly the same as setting the ignore_submodules option to GIT_SUBMODULE_IGNORE_ALL (which is actually a minor change from the old behavior in that submodules will now be treated as UNMODIFIED deltas instead of being left out totally - if you set GIT_DIFF_INCLUDE_UNMODIFIED). This includes tests for the various new settings.
2e3e273e	2013-06-29T13:20:45	Update diff to new internal submodule status API Submodules now expose an internal status API that allows diff to get back the OID values from the submodule very easily and also to avoiding caching issues and to override the ignore setting for the submodule.
e807860f	2013-06-27T16:52:38	Add timestamp check to submodule status This is probably not the final form of this change, but this is a preliminary version of checking a timestamp to see if the cached working directory HEAD OID matches the current. Right now, this uses the timestamp on the index and is, like most of our timestamp checking, subject to having only second accuracy.
4535f044	2013-06-27T16:12:44	More diff submodule tests for cache issues The submodules code caches data about submodules in a way that can cause problems. This adds some tests that try making various modifications to the state of a submodule to see where we can catch out problems in the submodule caching. Right now, I've put in an extra git_submodule_reload_all so that the test will pass, but with that commented out, the test fails. I'm working on fixing the broken version of the test at which point I'll commit the fix and delete the extra reload that makes the test pass.
3e7d7100	2013-06-27T16:12:00	Fix diff test helper to show parent file/line
49621a34	2013-06-27T15:46:46	Fix memory leak in test
12f8fe00	2013-06-27T15:43:12	More improvements to submodule diff tests This controls for the diff.mnemonicprefix setting so that can't break the tests. Also, this expands one test to emulate an ObjectiveGit test more closely.
0105b55e	2013-06-27T15:26:31	Add another submodule test of dirty wd
2b672d5b	2013-07-08T22:46:36	Add git_pathspec_match_diff API This adds an additional pathspec API that will match a pathspec against a diff object. This is convenient if you want to handle renames (so you need the whole diff and can't use the pathspec constraint built into the diff API) but still want to tell if the diff had any files that matched the pathspec. When the pathspec is matched against a diff, instead of keeping a list of filenames that matched, instead the API keeps the list of git_diff_deltas that matched and they can be retrieved via a new API git_pathspec_match_list_diff_entry. There are a couple of other minor API extensions here that were mostly for the sake of convenience and to reduce dependencies on knowing the internal data structure between files inside the library.
a5f9b5f8	2013-07-05T16:59:38	Diff hunk context off by one on long lines The diff hunk context string that is returned to xdiff need not be NUL terminated because the xdiff code just copies the number of bytes that you report directly into the output. There was an off by one in the diff driver code when the header context was longer than the output buffer size, the output buffer length included the NUL byte which was copied into the hunk header. Fixes #1710
c4ac556e	2013-06-29T12:48:58	Fix compilation warnings
c67ff958	2013-06-27T07:38:27	Fix bug marking submodule diffs as unmodified There was a bug where submodules whose HEAD had not been moved were being marked as having an UNMODIFIED delta record instead of being left MODIFIED. This fixes that and fixes the tests to notice if a submodule has been incorrectly marked as UNMODIFIED.
c7974b49	2013-06-26T12:03:33	Fail on unmodified deltas when they're unexpected
c0e58e43	2013-06-25T00:12:19	test-rename: This is not a decimal, silly
94ef2a35	2013-06-20T15:15:10	Add test for fixed diff bug Add test for bug fixed in 852ded96982ae70acb63c3940fae08ea29e40fee Sorry, I wrote that bug fix and forgot to check in a test at the same time. Here is one that fails on the old version of the code and now works.
e4acc3ba	2013-06-18T16:14:35	Fix rename looped reference issues This makes the diff rename tracking code more careful about the order in which it processes renames and more thorough in updating the mapping of correct renames when an earlier rename update alters the index of a later matched pair.
3b334075	2013-06-17T17:39:59	test illustrating tri-cyclic rename failure
f0f2ff9c	2013-06-17T17:33:40	test failure when renames produce similar similarities
74ded024	2013-06-17T17:03:34	Add "as_path" parameters to blob and buffer diffs This adds parameters to the four functions that allow for blob-to- blob and blob-to-buffer differencing (either via callbacks or by making a git_diff_patch object). These parameters let you say that filename we should pretend the blob has while doing the diff. If you pass NULL, there should be no change from the existing behavior, which is to skip using attributes for file type checks and just look at content. With the parameters, you can plug into the new diff driver functionality and get binary or non-binary behavior, plus function context regular expressions, etc. This commit also fixes things so that the git_diff_delta that is generated by these functions will actually be populated with the data that we know about the blobs (or buffers) so you can use it appropriately. It also fixes a bug in generating patches from the git_diff_patch objects created via these functions. Lastly, there is one other behavior change that may matter. If there is no difference between the two blobs, these functions no longer generate any diff callbacks / patches unless you have passed in GIT_DIFF_INCLUDE_UNMODIFIED. This is pretty natural, but could potentially change the behavior of existing usage.
de0555a3	2013-06-17T09:55:29	Fix memory leaks in diff rename tests This fixes a couple objects I forgot to free, and also updates the valgrind suppressions file on the Mac to cover a few more cases that had crept in.
f3b5bc83	2013-06-16T21:51:43	Add test of rename with no changes A tree to index rename with no changes was getting erased by the iteration routine (if the routine actually loaded the data for the unmodified file). This invokes the code path that was previously messing up the diff and iterates twice to make sure that the iteration process itself doesn't modify the data.
6ea999bb	2013-06-13T15:52:12	Make index_insert keep existing case In a case insensitive index, if you attempt to add a file from disk with a different case pattern, the old case pattern in the index should be preserved. This fixes that (and a couple of minor warnings).
1540b199	2013-05-31T18:12:49	some simple case-sensitive index tests
519072c9	2013-06-14T14:02:00	diff: fix warning
88c401be	2013-06-12T14:54:32	Merge pull request #1643 from ethomson/rename_source Keep data about source of similarity
f9c824c5	2013-06-12T11:55:27	Add patch from blobs API This adds two new public APIs: git_diff_patch_from_blobs and git_diff_patch_from_blob_and_buffer, plus it refactors the code for git_diff_blobs and git_diff_blob_to_buffer so that they code is almost entirely shared between these APIs, and adds tests for the new APIs.
54faddd2	2013-06-12T11:54:11	Fix some diff driver memory leaks
42e6cf78	2013-06-11T17:45:14	Add diff drivers tests (and fix bugs) This adds real tests for user-configured diff drivers and in the process found a bunch of bugs.
5dc98298	2013-06-11T11:22:22	Implement regex pattern diff driver This implements the loading of regular expression pattern lists for diff drivers that search for function context in that way. This also changes the way that diff drivers update options and interface with xdiff APIs to make them a little more flexible.
bda3fbb1	2013-06-10T14:17:54	failing unit test for similar renames
114f5a6c	2013-06-10T10:10:39	Reorganize diff and add basic diff driver This is a significant reorganization of the diff code to break it into a set of more clearly distinct files and to document the new organization. Hopefully this will make the diff code easier to understand and to extend. This adds a new `git_diff_driver` object that looks of diff driver information from the attributes and the config so that things like function content in diff headers can be provided. The full driver spec is not implemented in the commit - this is focused on the reorganization of the code and putting the driver hooks in place. This also removes a few #includes from src/repository.h that were overbroad, but as a result required extra #includes in a variety of places since including src/repository.h no longer results in pulling in the whole world.
cee695ae	2013-05-31T12:18:43	Make iterators use GIT_ITEROVER & smart advance 1. internal iterators now return GIT_ITEROVER when you go past the last item in the iteration. 2. git_iterator_advance will "advance" to the first item in the iteration if it is called immediately after creating the iterator, which allows a simpler idiom for basic iteration. 3. if git_iterator_advance encounters an error reading data (e.g. a missing tree or an unreadable file), it returns the error but also attempts to advance past the invalid data to prevent an infinite loop. Updated all tests and internal usage of iterators to account for these new behaviors.
49f70f2c	2013-05-23T15:48:06	Fill out diff rename test coverage This extends the rename tests to make sure that every rename scenario in the inner loop of git_diff_find_similar is actually exercised. Also, fixes an incorrect assert that was in one of the clauses that was not previously being exercised.
67db583d	2013-05-23T15:06:07	More diff rename tests; better split swap handling This adds a couple more tests of different rename scenarios. Also, this fixes a problem with the case where you have two "split" deltas and the left half of one matches the right half of the other. That case was already being handled, but in the wrong order in a way that could result in bad output. Also, if the swap also happened to put the other two halves into the correct place (i.e. two files exchanged places with each other), then the second delta was left with the SPLIT flag set when it really should be cleared.
a21cbb12	2013-05-22T10:37:12	Significant rename detection rewrite This flips rename detection around so instead of creating a forward mapping from deltas to possible rename targets, instead it creates a reverse mapping, looking at possible targets and trying to find a source that they could have been renamed or copied from. This is important because each output can only have a single source, but a given source could map to multiple outputs (in the form of COPIED records). Additionally, this makes a couple of tweaks to the public rename detection APIs, mostly renaming a couple of options that control the behavior to make more sense and to be more like core Git. I walked through the tests looking at the exact results and updated the expectations based on what I saw. The new code is different from the old because it cannot give some nonsense results (like A was renamed to both B and C) which were part of the outputs previously.
4742148d	2013-05-20T13:41:39	Add more diff rename detection tests This adds a bunch more rename detection tests including checks vs the working directory, the new exact match options, some more whitespace variants, etc. This also adds a git_futils_writebuffer helper function and uses it in checkout. This is mainly added because I wanted an easy way to write out a git_buf to disk inside my test code.
d958e37a	2013-05-17T17:21:45	Fix issues with git_diff_find_similar There are a number of bugs in the rename code that only were obvious when I started testing it against large old repos with more complex patterns. (The code to do that testing is not ready to merge with libgit2, but I do plan to add more thorough tests.) This contains a significant number of changes and also tweaks the public API slightly to make emulating core git easier. Most notably, this separates the GIT_DIFF_FIND_AND_BREAK_REWRITES flag into FIND_REWRITES (which adds a self-similarity score to every modified file) and BREAK_REWRITES (which splits the modified deltas into add/remove pairs in the diff list). When you do a raw output of core git, rewrites show up as M090 or such, not at A and D output, so I wanted to be able to emulate that. Publicly, this also changes the flags to be uint16_t since we don't need values out of that range. Internally, this contains significant changes from a number of small bug fixes (like using the wrong side of the diff to decide if the object could be found in the ODB vs the workdir) to larger issues about which files can and should be compared and how the various edge cases of similarity scores should be treated. Honestly, I don't think this is the last update that will have to be made to this code, but I think this moves us closer to correct behavior and I tried to document the code so it would be easier to follow..
79ef3be4	2013-05-15T14:50:05	Fix diff crash when last item is untracked dir When the last item in a diff was an untracked directory that only contained ignored items, the loop to scan the contents would run off the end of the iterator and dereference a NULL pointer. This includes a test that reproduces the problem and a fix.
b4d33e46	2013-05-14T21:54:26	Fix some memory leaks
e9ba61f3	2013-05-10T09:32:42	Fix diff output for renames and copies If you use rename detection, the renamed and copied files would not show any text diffs because the function that decides if data should be loaded didn't know which sides of the diff to load for those cases. This adds a test that looks at the patch generated for diff entries that are COPIED or RENAMED.
c2f602f8	2013-05-07T07:15:39	Fix line numbering for patches with eofnl When a patch contained an eofnl change (i.e. the last line either gained or lost a newline), the oldno and newno line number values for the lines in the last hunk of the patch were not useful. This makes them behave in a more expected manner.
fd96f98e	2013-05-07T04:36:42	More tests for files with no newline at end
e35e2684	2013-05-07T04:32:17	Add GIT_DIFF_LINE_CONTEXT_EOFNL This adds a new line origin constant for the special line that is used when both files end without a newline. In the course of writing the tests for this, I was having problems with modifying a file but not having diff notice because it was the same size and modified less than one second from the start of the test, so I decided to start working on nanosecond timestamp support. This commit doesn't contain the nanosecond support, but it contains the reorganization of maybe_modified and the hooks so that if the nanosecond data were being read by stat() (or rather being copied by git_index_entry__init_from_stat), then the nsec would be taken into account. This new stuff could probably use some more tests, although there is some amount of it here.
a66c4bc8	2013-04-29T02:57:01	More tests for diff untracked directories This includes more tests for various scenarios when diff includes an untracked directory in the workdir with contents either ignored or not.
b1ff7004	2013-04-22T16:25:57	Improve diff config options handling This makes diff use the cvar cache for config options where possible, and also adds support for a number of other config options to diff including "diff.context", "diff.ignoreSubmodules", "diff.noprefix", "diff.mnemonicprefix", and "core.abbrev". To make this natural, this involved a rearrangement of the code that allocates the diff object vs. the code that initializes it based on the combination of options passed in by the user and read from the config. This commit includes tests for most of these new options as well.
8842c75f	2013-04-03T22:30:07	What has science done.
1384b688	2013-04-19T13:00:12	Move some low-level repo fns to include/git2/sys
0d32f39e	2013-03-04T11:31:50	Notify '*' pathspec correctly when diffing I also moved all tests related to notifying in their own file.
ad26434b	2013-04-09T14:52:32	Tests and more fixes for submodule diffs This adds tests for diffs with submodules in them and (perhaps unsurprisingly) requires further fixes to be made. Specifically, this fixes: - when considering if a submodule is dirty in the workdir, it was being treated as dirty even if only the index was dirty. - git_diff_patch_to_str (and git_diff_patch_print) were "printing" the headers for files (and submodules) that were unmodified or had no meaningful content. - added comment to previous fix and removed unneeded parens.
ccfa6805	2013-03-25T23:58:40	Fix some diff ignores and submodule dirty workdir This started out trying to look at the problems from issue #1425 and gradually grew to a broader set of fixes. There are two core things fixed here: 1. When you had an ignore like "/bin" which is rooted at the top of your tree, instead of immediately adding the "bin/" entry as an ignored item in the diff, we were returning all of the direct descendants of the directory as ignored items. This changes things to immediately ignore the directory. Note that this effects the behavior in test_status_ignore__subdirectories so that we no longer exactly match core gits ignore behavior, but the new behavior probably makes more sense (i.e. we now will include an ignored directory inside an untracked directory that we previously would have left off). 2. When a submodule only contained working directory changes, the diff code was always considering it unmodified which was just an outright bug. The HEAD SHA of the submodule matches the SHA in the parent repo index, and since the SHAs matches, the diff code was overwriting the actual status with UNMODIFIED. These fixes broke existing tests test_diff_workdir__submodules and test_status_ignore__subdirectories but looking it over, I actually think the new results are correct and the old results were wrong. @nulltoken had actually commented on the subdirectory ignore issue previously. I also included in the tests some debugging versions of the shared iteration callback routines that print status or diff information. These aren't used actively in the tests, but can be quickly swapped in to test code to give a better picture of what is being scanned in some of the complex test scenarios.
1098cfae	2013-03-22T14:52:29	Test fixes and cleanup This fixes some places where the new tests were leaving the test area in a bad state or were freeing data they should not free. It also removes code that is extraneous to the core issue and fixes an invalid SHA being looked up in one of the tests (which was failing, but for the wrong reason).
b8acb775	2013-03-07T22:15:40	Added some tests for issue #1397 Signed-off-by: Sven Strickroth <email@cs-ware.de>
1323c6d1	2013-03-22T14:27:56	Add cl_repo_set_bool and cleanup tests This adds a helper function for the cases where you want to quickly set a single boolean config value for a repository. This allowed me to remove a lot of code.
65025cb8	2013-03-18T17:24:13	Three submodule status bug fixes 1. Fix sort order problem with submodules where "mod" was sorting after "mod-plus" because they were being sorted as "mod/" and "mod-plus/". This involved pushing the "contains a .git entry" test significantly lower in the stack. 2. Reinstate behavior that a directory which contains a .git entry will be treated as a submodule during iteration even if it is not yet added to the .gitmodules. 3. Now that any directory containing .git is reported as submodule, we have to be more careful checking for GIT_EEXISTS when we do a submodule lookup, because that is the error code that is returned by git_submodule_lookup when you try to look up a directory containing .git that has no record in gitmodules or the index.
1ac10aae	2013-03-12T09:23:53	Merge pull request #1408 from arrbee/refactor-iterators Refactor iterators
aa408cbf	2013-03-11T11:18:00	handle small files in similarity metrics
1aa5318a	2013-03-09T16:04:34	diff: allow asking for diffs with no context Previously, 0 meant default. This is problematic, as asking for 0 context lines is a valid thing to do. Change GIT_DIFF_OPTIONS_INIT to default to three and stop treating 0 as a magic value. In case no options are provided, make sure the options in the diff object default to 3.
9bea03ce	2013-03-06T15:16:34	Add INCLUDE_TREES, DONT_AUTOEXPAND iterator flags This standardizes iterator behavior across all three iterators (index, tree, and working directory). Previously the working directory iterator behaved differently from the other two. Each iterator can now operate in one of three modes: 1. No tree results, auto expand trees means that only non- tree items will be returned and when a tree/directory is encountered, we will automatically descend into it. 2. Tree results, auto expand trees means that results will be given for every item found, including trees, but you only need to call normal git_iterator_advance to yield every item (i.e. trees returned with pre-order iteration). 3. Tree results, no auto expand means that calling the normal git_iterator_advance when looking at a tree will not descend into the tree, but will skip over it to the next entry in the parent. Previously, behavior 1 was the only option for index and tree iterators, and behavior 3 was the only option for workdir. The main public API implications of this are that the `git_iterator_advance_into()` call is now valid for all iterators, not just working directory iterators, and all the existing uses of working directory iterators explicitly use the GIT_ITERATOR_DONT_AUTOEXPAND (for now). Interestingly, the majority of the implementation was in the index iterator, since there are no tree entries there and now have to fake them. The tree and working directory iterators only required small modifications.
169dc616	2013-03-05T16:10:05	Make iterator APIs consistent with standards The iterator APIs are not currently consistent with the parameter ordering of the rest of the codebase. This rearranges the order of parameters, simplifies the naming of a number of functions, and makes somewhat better use of macros internally to clean up the iterator code. This also expands the test coverage of iterator functionality, making sure that case sensitive range-limited iteration works correctly.
323bb885	2013-03-04T00:21:56	Fix a few leaks `git_diff_get_patch()` would unconditionally load the patch object and then simply leak it if the user hadn't requested it. Short-circuit loading the object if the user doesn't want it. The rest of the plugs are simply calling the free functions of objects allocated during the tests.
487fc724	2013-03-01T13:41:53	Allow empty config object and use it This removes assertions that prevent us from having an empty git_config object and then updates some tests that were dependent on global config state to use an empty config before running anything.
7d46b34b	2013-03-01T12:26:05	Control for core.autocrlf during testing
e68e33f3	2013-02-27T14:50:32	Merge pull request #1233 from arrbee/file-similarity-metric Add file similarity scoring to diff rename/copy detection
1be4ba98	2013-02-22T11:13:01	More rename detection tests This includes tests for crlf changes, whitespace changes with the default comparison and with the ignore whitespace comparison, and more sensitivity checking for the comparison code.
7beeb3f4	2013-02-22T14:03:44	Rename 'exp' so it doesn't conflict with exp()

61080a95

2013-11-05T15:10:02

Fix leaks

5a0b8803

2013-11-04T08:05:55

Merge pull request #1929 from libgit2/rb/misc-diff-fixes Fix some observed problems with incorrect diffs

187009e2

2013-11-02T18:34:51

Fix a leak in the diff tests

3e57069e

2013-11-01T13:49:43

Fix --assume-unchanged support This was never really working right because we were checking the wrong flag and not checking it in all the places that we need to be checking it. I finally got around to writing a test and adding actual support for it.

e7c85120

2013-11-01T11:39:37

More tests and fixed for merging reversed diffs There were a lot more cases to deal with to make sure that our merged (i.e. workdir-to-tree-to-index) diffs were matching the output of core Git.

a5c16f3c

2013-11-01T10:18:03

Add git_diff_options_init helper Sometimes the static initializer for git_diff_options cannot be used and since setting them to all zeroes doesn't actually work quite right, this adds a new helper for that situation. This also adds an explicit new value to the submodule settings options to be used when those enums need static initialization.

4bf630b6

2013-10-31T14:36:52

Make diff and status perform soft index reload This changes `git_index_read` to have two modes - a hard index reload that always resets the index to match the on-disk data (which was the old behavior) and a soft index reload that uses the timestamp / file size information and only replaces the index data if the file on disk has been modified. This then updates the git_status code to do a soft reload unless the new GIT_STATUS_OPT_NO_REFRESH flag is passed in. This also changes the behavior of the git_diff functions that use the index so that when an index is not explicitly passed in (i.e. when the functions call git_repository_index for you), they will also do a soft reload for you. This intentionally breaks the file signature of git_index_read because there has been some confusion about the behavior previously and it seems like all existing uses of the API should probably be examined to select the desired behavior.

5de4ec81

2013-10-21T15:36:38

Implement patience and minimal diff flags It seems that to implement these options, we just have to pass the appropriate flags through to the libxdiff code taken from core git. So let's do it (and add a test).

3b5f7954

2013-10-21T13:42:42

Create git_diff_line and extend git_diff_hunk Instead of having functions with so very many parameters to pass hunk and line data, this takes the existing git_diff_hunk struct and extends it with more hunk data, plus adds a git_diff_line. Those structs are used to pass back hunk and line data instead of the old APIs that took tons of parameters. Some work that was previously only being done for git_diff_patch creation (scanning the diff content for exact line counts) is now done for all callbacks, but the performance difference should not be noticable.

10672e3e

2013-10-15T15:10:07

Diff API cleanup This lays groundwork for separating formatting options from diff creation options. This groups the formatting flags separately from the diff list creation flags and reorders the options. This also tweaks some APIs to further separate code that uses patches from code that just looks at git_diffs.

3ff1d123

2013-10-11T14:51:54

Rename diff objects and split patch.h This makes no functional change to diff but renames a couple of the objects and splits the new git_patch (formerly git_diff_patch) into a new header file.

867f7c9b

2013-10-08T16:59:59

Rename new fn to git_repository_reinit_filesystem

14997dc5

2013-10-08T12:45:43

More filemode cleanups for FAT on MacOS This cleans up some additional issues. The main change is that on a filesystem that doesn't support mode bits, libgit2 will now create new blobs with GIT_FILEMODE_BLOB always instead of being at the mercy to the filesystem driver to report executable or not. This means that if "core.filemode" lies and claims that filemode is not supported, then we will ignore the executable bit from the filesystem. Previously we would have allowed it. This adds an option to the new git_repository_reset_filesystem to recurse through submodules if desired. There may be other types of APIs that would like a "recurse submodules" option, but this one is particularly useful. This also has a number of cleanups, etc., for related things including trying to give better error messages when problems come up from the filesystem. For example, the FAT filesystem driver on MacOS appears to return errno EINVAL if you attempt to write a filename with invalid UTF-8 in it. We try to capture that with a better error message now.

5173ea92

2013-10-04T16:32:16

Add git_repository_reset_filesystem and fix tests When a repository is transferred from one file system to another, many of the config settings that represent the properties of the file system may be wrong. This adds a new public API that will refresh the config settings of the repository to account for the change of file system. This doesn't do a full "reinitialize" and operates on a existing git_repository object refreshing the config when done. This commit then makes use of the new API in clar as each test repository is set up. This commit also has a number of other clar test fixes where we were making assumptions about the type of filesystem, either based on outdated config data or based on the OS instead of the FS.

634f10f6

2013-09-24T10:11:20

Fix incorrect return code in crlf filter The git_buf_text_gather_stats call returns a boolean indicating if the file looks like binary data. That shouldn't be an error; it should be used to skip CRLF processing though.

155fa234

2013-09-05T15:06:42

Add clar helper to create new commit from index There were a lot of places in the test code base that were creating a commit from the index on the current branch. This just adds a helper to handle that case pretty easily. There was only one test where this change ended up tweaking the test data, so pretty easy and mostly just a cleanup.

8427757f

2013-09-13T12:32:45

Fixing up some win32 issues with autocrlf

d5b1866c

2013-09-13T09:26:26

Rearrange clar submodule cleanup code

27061b15

2013-09-05T10:25:16

Fix some newer GCC compiler warnings

cf94024c

2013-09-04T11:42:48

Update clar

17c7fbf6

2013-08-21T14:07:53

Split rewrites, status doesn't return rewrites Ensure that we apply splits to rewrites, even if we're not interested in examining it closely for rename/copy detection. In keeping with core git, status should not display rewrites, it should simply show files as "modified".

5e96f316

2013-08-08T08:54:38

Merge pull request #1738 from libgit2/diff-patch-content-size Add API for getting at git_diff_patch->content_size

e8242022

2013-08-05T09:59:02

Move slow tests to "stress" clar module Create a new section of clar tests "stress" that will default to being off where we can put slow tests that push the library for performance testing purposes.

31b42eac

2013-08-04T14:09:44

Restore commented out tests This restores the commented out tests (even though they're slow) and fixes some trailing whitespace.

0a38eb42

2013-07-31T22:36:50

Rename test for rename from rewrite A rename test that illustrates a rename from a rewrite.

a42c2a8c

2013-07-31T21:51:50

Rename test for multiple similar matches A rename test that illustrates a source matching multiple targets.

d730d3f4

2013-07-31T16:40:42

Major rename detection changes After doing further profiling, I found that a lot of time was being spent attempting to insert hashes into the file hash signature when using the rolling hash because the rolling hash approach generates a hash per byte of the file instead of one per run/line of data. To optimize this, I decided to convert back to a run-based file signature algorithm which would be more like core Git. After changing this, a number of the existing tests started to fail. In some cases, this appears to have been because the test was coded to be too specific to the particular results of the file similarity metric and in some cases there appear to have been bugs in the core rename detection code where only by the coincidence of the file similarity scoring were the expected results being generated. This renames all the variables in the core rename detection code to be more consistent and hopefully easier to follow which made it a bit easier to reason about the behavior of that code and fix the problems that I was seeing. I think it's in better shape now. There are a couple of tests now that attempt to stress test the rename detection code and they are quite slow. Most of the time is spent setting up the test data on disk and in the index. When we roll out performance improvements for index insertion, it should also speed up these tests I hope.

a5140f4d

2013-07-24T17:11:49

Fix rename detection for tree-to-tree diffs The performance improvements I introduced for rename detection were not able to run successfully for tree-to-tree diffs because the blob size was not known early enough and so the file signature always had to be calculated nonetheless. This change separates loading blobs into memory from calculating the signature. I can't avoid having to load the large blobs into memory, but by moving it forward, I'm able to avoid the signature calculation if the blob won't come into play for renames.

397357a0

2013-07-24T13:12:00

Add rename test that used to be really slow Before the optimization commits, this test used to take about 20 seconds to run on my machine. Afterwards, there is still a couple seconds of data setup, but the actual diff and rename detection runs in a fraction of a second.

197b8966

2013-07-23T14:34:31

Add hunk/file headers to git_diff_patch_size This allows git_diff_patch_size to account for hunk headers and file headers in the returned size. This required some refactoring of the code that is used to print file headers so that it could be invoked by the git_diff_patch_size API. Also this increases the test coverage and fixes an off-by-one bug in the size calculation when newline changes happen at the end of the file.

b4a4cf24

2013-07-22T16:07:56

Add git_diff_patch_size() API This adds a new API to get the size in bytes of the diffs in a git_diff_patch object.

d6cb13d7

2013-07-13T14:00:05

tests: Fix memory leak

584f2d30

2013-07-11T11:04:42

Fix warnings on Win64

125655fe

2013-07-02T16:49:57

Untracked directories with .git should be ignored This restores a behavior that was accidentally lost during some diff refactoring where an untracked directory that contains a .git item should be treated as IGNORED, not as UNTRACKED. The submodule code already detects this, but the diff code was not handling the scenario right. This also updates a number of existing tests that were actually exercising the behavior but did not have the right expectations in place. It actually makes the new `test_diff_submodules__diff_ignore_options` test feel much better because the "not-a-submodule" entries are now ignored instead of showing up as untracked items. Fixes #1697

9564229a

2013-06-30T08:43:07

Add tests for diff.ignoreSubmdules config

f9775a37

2013-06-29T23:22:31

Add ignore_submodules to diff options This adds correct support for an equivalent to --ignore-submodules in diff, where an actual ignore value can be passed to diff to override the per submodule settings in the configuration. This required tweaking the constants for ignore values so that zero would not be used and could represent an unset option to the diff. This was an opportunity to move the submodule values into include/git2/types.h and to rename the poorly named DEFAULT values for ignore and update constants to RESET instead. Now the GIT_DIFF_IGNORE_SUBMODULES flag is exactly the same as setting the ignore_submodules option to GIT_SUBMODULE_IGNORE_ALL (which is actually a minor change from the old behavior in that submodules will now be treated as UNMODIFIED deltas instead of being left out totally - if you set GIT_DIFF_INCLUDE_UNMODIFIED). This includes tests for the various new settings.

2e3e273e

2013-06-29T13:20:45

Update diff to new internal submodule status API Submodules now expose an internal status API that allows diff to get back the OID values from the submodule very easily and also to avoiding caching issues and to override the ignore setting for the submodule.

e807860f

2013-06-27T16:52:38

Add timestamp check to submodule status This is probably not the final form of this change, but this is a preliminary version of checking a timestamp to see if the cached working directory HEAD OID matches the current. Right now, this uses the timestamp on the index and is, like most of our timestamp checking, subject to having only second accuracy.

4535f044

2013-06-27T16:12:44

More diff submodule tests for cache issues The submodules code caches data about submodules in a way that can cause problems. This adds some tests that try making various modifications to the state of a submodule to see where we can catch out problems in the submodule caching. Right now, I've put in an extra git_submodule_reload_all so that the test will pass, but with that commented out, the test fails. I'm working on fixing the broken version of the test at which point I'll commit the fix and delete the extra reload that makes the test pass.

3e7d7100

2013-06-27T16:12:00

Fix diff test helper to show parent file/line

49621a34

2013-06-27T15:46:46

Fix memory leak in test

12f8fe00

2013-06-27T15:43:12

More improvements to submodule diff tests This controls for the diff.mnemonicprefix setting so that can't break the tests. Also, this expands one test to emulate an ObjectiveGit test more closely.

0105b55e

2013-06-27T15:26:31

Add another submodule test of dirty wd

2b672d5b

2013-07-08T22:46:36

Add git_pathspec_match_diff API This adds an additional pathspec API that will match a pathspec against a diff object. This is convenient if you want to handle renames (so you need the whole diff and can't use the pathspec constraint built into the diff API) but still want to tell if the diff had any files that matched the pathspec. When the pathspec is matched against a diff, instead of keeping a list of filenames that matched, instead the API keeps the list of git_diff_deltas that matched and they can be retrieved via a new API git_pathspec_match_list_diff_entry. There are a couple of other minor API extensions here that were mostly for the sake of convenience and to reduce dependencies on knowing the internal data structure between files inside the library.

a5f9b5f8

2013-07-05T16:59:38

Diff hunk context off by one on long lines The diff hunk context string that is returned to xdiff need not be NUL terminated because the xdiff code just copies the number of bytes that you report directly into the output. There was an off by one in the diff driver code when the header context was longer than the output buffer size, the output buffer length included the NUL byte which was copied into the hunk header. Fixes #1710

c4ac556e

2013-06-29T12:48:58

Fix compilation warnings

c67ff958

2013-06-27T07:38:27

Fix bug marking submodule diffs as unmodified There was a bug where submodules whose HEAD had not been moved were being marked as having an UNMODIFIED delta record instead of being left MODIFIED. This fixes that and fixes the tests to notice if a submodule has been incorrectly marked as UNMODIFIED.

c7974b49

2013-06-26T12:03:33

Fail on unmodified deltas when they're unexpected

c0e58e43

2013-06-25T00:12:19

test-rename: This is not a decimal, silly

94ef2a35

2013-06-20T15:15:10

Add test for fixed diff bug Add test for bug fixed in 852ded96982ae70acb63c3940fae08ea29e40fee Sorry, I wrote that bug fix and forgot to check in a test at the same time. Here is one that fails on the old version of the code and now works.

e4acc3ba

2013-06-18T16:14:35

Fix rename looped reference issues This makes the diff rename tracking code more careful about the order in which it processes renames and more thorough in updating the mapping of correct renames when an earlier rename update alters the index of a later matched pair.

3b334075

2013-06-17T17:39:59

test illustrating tri-cyclic rename failure

f0f2ff9c

2013-06-17T17:33:40

test failure when renames produce similar similarities

74ded024

2013-06-17T17:03:34

Add "as_path" parameters to blob and buffer diffs This adds parameters to the four functions that allow for blob-to- blob and blob-to-buffer differencing (either via callbacks or by making a git_diff_patch object). These parameters let you say that filename we should pretend the blob has while doing the diff. If you pass NULL, there should be no change from the existing behavior, which is to skip using attributes for file type checks and just look at content. With the parameters, you can plug into the new diff driver functionality and get binary or non-binary behavior, plus function context regular expressions, etc. This commit also fixes things so that the git_diff_delta that is generated by these functions will actually be populated with the data that we know about the blobs (or buffers) so you can use it appropriately. It also fixes a bug in generating patches from the git_diff_patch objects created via these functions. Lastly, there is one other behavior change that may matter. If there is no difference between the two blobs, these functions no longer generate any diff callbacks / patches unless you have passed in GIT_DIFF_INCLUDE_UNMODIFIED. This is pretty natural, but could potentially change the behavior of existing usage.

de0555a3

2013-06-17T09:55:29

Fix memory leaks in diff rename tests This fixes a couple objects I forgot to free, and also updates the valgrind suppressions file on the Mac to cover a few more cases that had crept in.

f3b5bc83

2013-06-16T21:51:43

Add test of rename with no changes A tree to index rename with no changes was getting erased by the iteration routine (if the routine actually loaded the data for the unmodified file). This invokes the code path that was previously messing up the diff and iterates twice to make sure that the iteration process itself doesn't modify the data.

6ea999bb

2013-06-13T15:52:12

Make index_insert keep existing case In a case insensitive index, if you attempt to add a file from disk with a different case pattern, the old case pattern in the index should be preserved. This fixes that (and a couple of minor warnings).

1540b199

2013-05-31T18:12:49

some simple case-sensitive index tests

519072c9

2013-06-14T14:02:00

diff: fix warning

88c401be

2013-06-12T14:54:32

Merge pull request #1643 from ethomson/rename_source Keep data about source of similarity

f9c824c5

2013-06-12T11:55:27

Add patch from blobs API This adds two new public APIs: git_diff_patch_from_blobs and git_diff_patch_from_blob_and_buffer, plus it refactors the code for git_diff_blobs and git_diff_blob_to_buffer so that they code is almost entirely shared between these APIs, and adds tests for the new APIs.

54faddd2

2013-06-12T11:54:11

Fix some diff driver memory leaks

42e6cf78

2013-06-11T17:45:14

Add diff drivers tests (and fix bugs) This adds real tests for user-configured diff drivers and in the process found a bunch of bugs.

5dc98298

2013-06-11T11:22:22

Implement regex pattern diff driver This implements the loading of regular expression pattern lists for diff drivers that search for function context in that way. This also changes the way that diff drivers update options and interface with xdiff APIs to make them a little more flexible.

bda3fbb1

2013-06-10T14:17:54

failing unit test for similar renames

114f5a6c

2013-06-10T10:10:39

Reorganize diff and add basic diff driver This is a significant reorganization of the diff code to break it into a set of more clearly distinct files and to document the new organization. Hopefully this will make the diff code easier to understand and to extend. This adds a new `git_diff_driver` object that looks of diff driver information from the attributes and the config so that things like function content in diff headers can be provided. The full driver spec is not implemented in the commit - this is focused on the reorganization of the code and putting the driver hooks in place. This also removes a few #includes from src/repository.h that were overbroad, but as a result required extra #includes in a variety of places since including src/repository.h no longer results in pulling in the whole world.

cee695ae

2013-05-31T12:18:43

Make iterators use GIT_ITEROVER & smart advance 1. internal iterators now return GIT_ITEROVER when you go past the last item in the iteration. 2. git_iterator_advance will "advance" to the first item in the iteration if it is called immediately after creating the iterator, which allows a simpler idiom for basic iteration. 3. if git_iterator_advance encounters an error reading data (e.g. a missing tree or an unreadable file), it returns the error but also attempts to advance past the invalid data to prevent an infinite loop. Updated all tests and internal usage of iterators to account for these new behaviors.

49f70f2c

2013-05-23T15:48:06

Fill out diff rename test coverage This extends the rename tests to make sure that every rename scenario in the inner loop of git_diff_find_similar is actually exercised. Also, fixes an incorrect assert that was in one of the clauses that was not previously being exercised.

67db583d

2013-05-23T15:06:07

More diff rename tests; better split swap handling This adds a couple more tests of different rename scenarios. Also, this fixes a problem with the case where you have two "split" deltas and the left half of one matches the right half of the other. That case was already being handled, but in the wrong order in a way that could result in bad output. Also, if the swap also happened to put the other two halves into the correct place (i.e. two files exchanged places with each other), then the second delta was left with the SPLIT flag set when it really should be cleared.

a21cbb12

2013-05-22T10:37:12

Significant rename detection rewrite This flips rename detection around so instead of creating a forward mapping from deltas to possible rename targets, instead it creates a reverse mapping, looking at possible targets and trying to find a source that they could have been renamed or copied from. This is important because each output can only have a single source, but a given source could map to multiple outputs (in the form of COPIED records). Additionally, this makes a couple of tweaks to the public rename detection APIs, mostly renaming a couple of options that control the behavior to make more sense and to be more like core Git. I walked through the tests looking at the exact results and updated the expectations based on what I saw. The new code is different from the old because it cannot give some nonsense results (like A was renamed to both B and C) which were part of the outputs previously.

4742148d

2013-05-20T13:41:39

Add more diff rename detection tests This adds a bunch more rename detection tests including checks vs the working directory, the new exact match options, some more whitespace variants, etc. This also adds a git_futils_writebuffer helper function and uses it in checkout. This is mainly added because I wanted an easy way to write out a git_buf to disk inside my test code.

d958e37a

2013-05-17T17:21:45

Fix issues with git_diff_find_similar There are a number of bugs in the rename code that only were obvious when I started testing it against large old repos with more complex patterns. (The code to do that testing is not ready to merge with libgit2, but I do plan to add more thorough tests.) This contains a significant number of changes and also tweaks the public API slightly to make emulating core git easier. Most notably, this separates the GIT_DIFF_FIND_AND_BREAK_REWRITES flag into FIND_REWRITES (which adds a self-similarity score to every modified file) and BREAK_REWRITES (which splits the modified deltas into add/remove pairs in the diff list). When you do a raw output of core git, rewrites show up as M090 or such, not at A and D output, so I wanted to be able to emulate that. Publicly, this also changes the flags to be uint16_t since we don't need values out of that range. Internally, this contains significant changes from a number of small bug fixes (like using the wrong side of the diff to decide if the object could be found in the ODB vs the workdir) to larger issues about which files can and should be compared and how the various edge cases of similarity scores should be treated. Honestly, I don't think this is the last update that will have to be made to this code, but I think this moves us closer to correct behavior and I tried to document the code so it would be easier to follow..

79ef3be4

2013-05-15T14:50:05

Fix diff crash when last item is untracked dir When the last item in a diff was an untracked directory that only contained ignored items, the loop to scan the contents would run off the end of the iterator and dereference a NULL pointer. This includes a test that reproduces the problem and a fix.

b4d33e46

2013-05-14T21:54:26

Fix some memory leaks

e9ba61f3

2013-05-10T09:32:42

Fix diff output for renames and copies If you use rename detection, the renamed and copied files would not show any text diffs because the function that decides if data should be loaded didn't know which sides of the diff to load for those cases. This adds a test that looks at the patch generated for diff entries that are COPIED or RENAMED.

c2f602f8

2013-05-07T07:15:39

Fix line numbering for patches with eofnl When a patch contained an eofnl change (i.e. the last line either gained or lost a newline), the oldno and newno line number values for the lines in the last hunk of the patch were not useful. This makes them behave in a more expected manner.

fd96f98e

2013-05-07T04:36:42

More tests for files with no newline at end

e35e2684

2013-05-07T04:32:17

Add GIT_DIFF_LINE_CONTEXT_EOFNL This adds a new line origin constant for the special line that is used when both files end without a newline. In the course of writing the tests for this, I was having problems with modifying a file but not having diff notice because it was the same size and modified less than one second from the start of the test, so I decided to start working on nanosecond timestamp support. This commit doesn't contain the nanosecond support, but it contains the reorganization of maybe_modified and the hooks so that if the nanosecond data were being read by stat() (or rather being copied by git_index_entry__init_from_stat), then the nsec would be taken into account. This new stuff could probably use some more tests, although there is some amount of it here.

a66c4bc8

2013-04-29T02:57:01

More tests for diff untracked directories This includes more tests for various scenarios when diff includes an untracked directory in the workdir with contents either ignored or not.

b1ff7004

2013-04-22T16:25:57

Improve diff config options handling This makes diff use the cvar cache for config options where possible, and also adds support for a number of other config options to diff including "diff.context", "diff.ignoreSubmodules", "diff.noprefix", "diff.mnemonicprefix", and "core.abbrev". To make this natural, this involved a rearrangement of the code that allocates the diff object vs. the code that initializes it based on the combination of options passed in by the user and read from the config. This commit includes tests for most of these new options as well.

8842c75f

2013-04-03T22:30:07

What has science done.

1384b688

2013-04-19T13:00:12

Move some low-level repo fns to include/git2/sys

0d32f39e

2013-03-04T11:31:50

Notify '*' pathspec correctly when diffing I also moved all tests related to notifying in their own file.

ad26434b

2013-04-09T14:52:32

Tests and more fixes for submodule diffs This adds tests for diffs with submodules in them and (perhaps unsurprisingly) requires further fixes to be made. Specifically, this fixes: - when considering if a submodule is dirty in the workdir, it was being treated as dirty even if only the index was dirty. - git_diff_patch_to_str (and git_diff_patch_print) were "printing" the headers for files (and submodules) that were unmodified or had no meaningful content. - added comment to previous fix and removed unneeded parens.

ccfa6805

2013-03-25T23:58:40

Fix some diff ignores and submodule dirty workdir This started out trying to look at the problems from issue #1425 and gradually grew to a broader set of fixes. There are two core things fixed here: 1. When you had an ignore like "/bin" which is rooted at the top of your tree, instead of immediately adding the "bin/" entry as an ignored item in the diff, we were returning all of the direct descendants of the directory as ignored items. This changes things to immediately ignore the directory. Note that this effects the behavior in test_status_ignore__subdirectories so that we no longer exactly match core gits ignore behavior, but the new behavior probably makes more sense (i.e. we now will include an ignored directory inside an untracked directory that we previously would have left off). 2. When a submodule only contained working directory changes, the diff code was always considering it unmodified which was just an outright bug. The HEAD SHA of the submodule matches the SHA in the parent repo index, and since the SHAs matches, the diff code was overwriting the actual status with UNMODIFIED. These fixes broke existing tests test_diff_workdir__submodules and test_status_ignore__subdirectories but looking it over, I actually think the new results are correct and the old results were wrong. @nulltoken had actually commented on the subdirectory ignore issue previously. I also included in the tests some debugging versions of the shared iteration callback routines that print status or diff information. These aren't used actively in the tests, but can be quickly swapped in to test code to give a better picture of what is being scanned in some of the complex test scenarios.

1098cfae

2013-03-22T14:52:29

Test fixes and cleanup This fixes some places where the new tests were leaving the test area in a bad state or were freeing data they should not free. It also removes code that is extraneous to the core issue and fixes an invalid SHA being looked up in one of the tests (which was failing, but for the wrong reason).

b8acb775

2013-03-07T22:15:40

Added some tests for issue #1397 Signed-off-by: Sven Strickroth <email@cs-ware.de>

1323c6d1

2013-03-22T14:27:56

Add cl_repo_set_bool and cleanup tests This adds a helper function for the cases where you want to quickly set a single boolean config value for a repository. This allowed me to remove a lot of code.

65025cb8

2013-03-18T17:24:13

Three submodule status bug fixes 1. Fix sort order problem with submodules where "mod" was sorting after "mod-plus" because they were being sorted as "mod/" and "mod-plus/". This involved pushing the "contains a .git entry" test significantly lower in the stack. 2. Reinstate behavior that a directory which contains a .git entry will be treated as a submodule during iteration even if it is not yet added to the .gitmodules. 3. Now that any directory containing .git is reported as submodule, we have to be more careful checking for GIT_EEXISTS when we do a submodule lookup, because that is the error code that is returned by git_submodule_lookup when you try to look up a directory containing .git that has no record in gitmodules or the index.

1ac10aae

2013-03-12T09:23:53

Merge pull request #1408 from arrbee/refactor-iterators Refactor iterators

aa408cbf

2013-03-11T11:18:00

handle small files in similarity metrics

1aa5318a

2013-03-09T16:04:34

diff: allow asking for diffs with no context Previously, 0 meant default. This is problematic, as asking for 0 context lines is a valid thing to do. Change GIT_DIFF_OPTIONS_INIT to default to three and stop treating 0 as a magic value. In case no options are provided, make sure the options in the diff object default to 3.

9bea03ce

2013-03-06T15:16:34

Add INCLUDE_TREES, DONT_AUTOEXPAND iterator flags This standardizes iterator behavior across all three iterators (index, tree, and working directory). Previously the working directory iterator behaved differently from the other two. Each iterator can now operate in one of three modes: 1. *No tree results, auto expand trees* means that only non- tree items will be returned and when a tree/directory is encountered, we will automatically descend into it. 2. *Tree results, auto expand trees* means that results will be given for every item found, including trees, but you only need to call normal git_iterator_advance to yield every item (i.e. trees returned with pre-order iteration). 3. *Tree results, no auto expand* means that calling the normal git_iterator_advance when looking at a tree will not descend into the tree, but will skip over it to the next entry in the parent. Previously, behavior 1 was the only option for index and tree iterators, and behavior 3 was the only option for workdir. The main public API implications of this are that the `git_iterator_advance_into()` call is now valid for all iterators, not just working directory iterators, and all the existing uses of working directory iterators explicitly use the GIT_ITERATOR_DONT_AUTOEXPAND (for now). Interestingly, the majority of the implementation was in the index iterator, since there are no tree entries there and now have to fake them. The tree and working directory iterators only required small modifications.

169dc616

2013-03-05T16:10:05

Make iterator APIs consistent with standards The iterator APIs are not currently consistent with the parameter ordering of the rest of the codebase. This rearranges the order of parameters, simplifies the naming of a number of functions, and makes somewhat better use of macros internally to clean up the iterator code. This also expands the test coverage of iterator functionality, making sure that case sensitive range-limited iteration works correctly.

323bb885

2013-03-04T00:21:56

Fix a few leaks `git_diff_get_patch()` would unconditionally load the patch object and then simply leak it if the user hadn't requested it. Short-circuit loading the object if the user doesn't want it. The rest of the plugs are simply calling the free functions of objects allocated during the tests.

487fc724

2013-03-01T13:41:53

Allow empty config object and use it This removes assertions that prevent us from having an empty git_config object and then updates some tests that were dependent on global config state to use an empty config before running anything.

7d46b34b

2013-03-01T12:26:05

Control for core.autocrlf during testing

e68e33f3

2013-02-27T14:50:32

Merge pull request #1233 from arrbee/file-similarity-metric Add file similarity scoring to diff rename/copy detection

1be4ba98

2013-02-22T11:13:01

More rename detection tests This includes tests for crlf changes, whitespace changes with the default comparison and with the ignore whitespace comparison, and more sensitivity checking for the comparison code.

7beeb3f4

2013-02-22T14:03:44

Rename 'exp' so it doesn't conflict with exp()

thodg/libgit2/tests-clar/diff

tests-clar/diff

Log